2
Rheology Initiation Day 2016
RheologyInitiation Day
2016
The Rheology Day
Description:
This workshop is aimed at those new to rheology or those who have used, or are using, viscometer and would like to learn more about rheology.
By the end of this work shop, you will be able to:
Understand basic rheology theory and speak its languageDesign meaningful experiments to characterize your samplesHave an overview of the wide range of solutions and applications provided by rheometer and its accessories
The one day workshop includes both theoretical and practical sessions.
Date and Venue
16th March 201617th May 201619th July 201629th September 201615th November 2016
Anton Paar Malaysia Sdn Bhd Suite 12-04, Level 12The Pinnacle, Persiaran LagoonBandar Sunway, 46150 PetalingJaya Selangor, Malaysia
Costs:
FREEParticipants will be able to purchase Rheology handbook written by Anton Paar Rheology Expert, Dr Thomas Mezger at special rate during Rheology day.
Contact:
Tel: 03-7669 [email protected]
The Rheology workshops always fill up quickly. If you are interested in attending, we highly recommend you register as soon as possible. Seating is limited and registration will be closed once the seating capacity has been reached. RSVP is required, please send your name and department to [email protected]
Agenda
9:00 – 12:00 Talk on Basic of RheologyPart 1: Rheology - Viscosity and flow behavior
Part 2: Rheology – Elasticity and viscoelastic behavior
12:00 – 13:00 Break
13:00 – 16:30 Practical Session
16:30 – 17:00 Question and Answer Session
Trainer:
Nigel FoongRheology Application Specialist
Mr. Nigel Foong joined Universiti Tunku Abdul Rahman as Assistant Laboratory Manager for 3 years. He served in laboratory management and look over analytical instruments of material characterization in spectroscopy (FT-IR, UV-Vis, Polarimeter, Fluorescence, AAS), thermal analyser (TGA, DSC) and X-ray Diffractometer (XRD).
In assisting lab practicals, he also demonstrate basic operations of HPLC and GC-FID system. He also undergo training as a radiation worker and practice occupational health and safety in educational laboratory.
With his varied experience in materials characterization, Nigel is currently with Anton Paar as the application specialist supporting customers in rheology and microwave sample preparation.
![Rheology for Quality Control - Better Rheological Results...rheometer to achieve the same effect. When a calibration like the MicroStressControl (MSC) [1] is performed to improve the](https://static.documents.pub/doc/80x56/6104fdfd2dc4dd573f1311c2/rheology-for-quality-control-better-rheological-results-rheometer-to-achieve.jpg)
