CAR

Rick and MortyPortal - ExtruderVisualizer

VIEW IN BROWSER

updated 29. 8. 2019 | published 29. 8. 2019

PRUSAPRINTERS

Summary

I decided my Prusa MK3s needed a really cool extruder visualizer - anddecided to design an animated Rick and Morty Portal. Animated Gif of the visualizer in action.

Please see the Prusa Blog for details on building the inner, spinning, "swirl"

1 hrs

2 pcs

f

0.15 mm

k

0.40 mm

h

PLA

9 g

d

MK3/S

3D Printers > Other Accessories

visualizer rickandmorty rick portal morty extruder

"Swirl" was printed in Inland PLA - Peak Green.

"Fixed Portal" was started with Inland PLA - Light Blue, and then changedto Inland PLA - Dark Green once the layer change was signaled. This allowsfor a really nice color version of the swirling portal.

The "Fixed Portal", when complete, will attach to the extruder housingdirectly. Then, using the previously mentioned Blog steps, the "Swirl" printwas attached to a mini-magnet and connected to the extruder motor shaft.

Print Files (.gcode) DOWNLOAD ALL FILES

1.5 MB

0.41 hrs f 0.15 mm k 0.40 mm h PLA 1.70 g d MK3/S

updated 29. 8. 2019

2.0 MB

0.98 hrs f 0.15 mm k 0.40 mm h PLA 7.10 g d MK3/S

updated 29. 8. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

1.8 MBupdated 29. 8. 2019

2.9 MBupdated 29. 8. 2019

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use

swirl-portal_015mm_pla_mk3s_25m.gcode

fixed-portal_015mm_pla_mk3s_59m.gcode

swirl-portal.stl

fixed-portal.stl

✖ | Free Cultural Works ✖ | Meets Open Definition