GLOBAL HEADQUARTERS
2851 Prairie SW
Grandville, MI 49418
Ph. +1 616.530.1717 Fax +1 616.530.3283
RIDE CONTROL SYSTEMS
GLOBAL HEADQUARTERS Ph +1 616.530.1717 Fax +1 616.530.3283 | www.hadleyadvantage.com
2
Ride Control Systems
NEXT GENERATION HEIGHT CONTROL VALVESOFFERS FLEXIBILITY IN MOUNTING • PLUMBING • LEVER ATTACHMENT
• Lightweight• High fl ow standard. Call for low fl ow designs• PTC fi ttings: 3/8” standard or 1/4” custom• Metric fi ttings available• Multiple mounting confi gurations• Fits all truck & trailer applications• Low cost!• Multiple lever orientations
NGHCV DUMP
NON-DUMP VALVE Truck and Trailer Applications ALL MAKES
H01500UN 4 diff erent size lever options, mounting bolts, (1) 3/8” 90 degree stem fi ttings,
instruction sheet
• 3/8” PTC fi ttings in supply & suspensionKIT
INCLUDESPRODUCT
PRESSURE DUMP VALVE Truck and Trailer Applications ALL MAKES *Excludes Peterbilt and Kenworth
H01501UD 4 diff erent size lever options, (1) 1/4” 90 degree stem fi ttings, (1) 3/8” 90 degree
stem fi ttings, (1) 3/8” plug, mounting bolts, air line to convert the H01501UD to a
non-dump valve, instruction sheet
• 3/8” PTC fi ttings in supply & suspension • 1/4” pilot port
KITINCLUDES
PRODUCT
PRESSURE DUMP VALVE Truck and Trailer Applications PETERBILT AND KENWORTH
H01501PUD 4 diff erent size lever options, (1) 1/4” 90 degree stem fi ttings, mounting bolts,
instruction sheet
• 1/4” PTC fi ttings in pilot and suspension ports• 1/4” elbow fi tted to 3/8” PTC in the supply port
KITINCLUDES
PRODUCT
ZERO PRESSURE DUMP VALVE Truck and Trailer Applications ALL MAKES
H01502UNC 4 diff erent size lever options, (1) 1/4” 90 degree stem fi ttings, (1) 3/8” plug,
mounting bolts, instruction sheet
• 3/8” PTC fi ttings in supply, suspension and pilot portKIT
INCLUDESPRODUCT
NGHCV NON-DUMP
NGHCV DUMP
GLOBAL HEADQUARTERS Ph +1 616.530.1717 Fax +1 616.530.3283 | www.hadleyadvantage.com
3
Ride Control Systems
500 SERIES HEIGHT CONTROL VALVE• With integral dump valve for tractor, trailer and Class A RV applications (SINGLE suspension ports)
H00500C H00500C valve, (3) levers and (2) brackets
KITINCLUDES
PRODUCT
CLASSIC VALVES
500 SERIES HEIGHT CONTROL REVERSE ACTUATION VALVE• With integral dump and reverse actuation valve for automatic dump, trailer only
H00500CA H00500C valve, (3) levers and (2) brackets. HPB500D reverse actuation valve
KITINCLUDES
PRODUCT
450 SERIES HEIGHT CONTROL VALVE• For tractor cab or chassis and trailer applications
H00450CE H00450CE valve, (2) levers and (2) brackets
KITINCLUDESPRODUCT
500 SERIES HEIGHT CONTROL VALVE•With integral dump valve for tractor, trailer and Class A RV applications (DUAL suspension ports)
H00500DC H00500DC valve, (3) levers and (2) brackets
KITINCLUDESPRODUCT
500 SERIES OEM / ALL MAKES HEIGHT CONTROL VALVE• For tractor applications • With Integral Dump Valve (DUAL suspension ports)
H00500CF Mack H00500CF valve, (3) levers and (2) brackets
H00500CG Kenworth H00500CG valve, (3) levers and (2) brackets
H00500FS Freightliner H00500FS valve, (3) levers and (2) brackets
H00500CB Peterbilt H00500CB valve, (3) levers and (2) brackets
H00500VW* Volvo H00500VW valve, (3) levers and (2) brackets
KITINCLUDESPRODUCT MAKE
*REPLACES WABCO VALVE
GLOBAL HEADQUARTERS Ph +1 616.530.1717 Fax +1 616.530.3283 | www.hadleyadvantage.com
4
Ride Control Systems
ACCESSORIES
A. HPB450H Rubber ended universal linkage
B. HPB500D Reverse actuation valve kit for H00500CA. Can be used as “Normally opened” dump valve
C. H00460 Adjustable universal linkage
DESCRIPTIONPRODUCT
A. B. C.
WHY IT MATTERSHadley height control valves are engineered to be the most reliable valves on the road.
Counterfeit valves are not built to the same standards, do not meet the same specifi cations, do
not perform as well or last as long as a genuine Hadley valve. Counterfeit valves submitted to
Hadley for warranty claims will not be reimbursed and may result in punitive damages against
the claimant.
GENUINE HADLEY
GENUINE HADLEY MEANS SUPERIOR PERFORMANCE• Superior lubricants with proven and consistent lubrication to protect the valve
• Proven O-ring seal integrity throughout the life of the valve
• Counterfeit valves require frequent replacement due to excessive wear and tear
• Hadley leveling valves are designed with 37 years of leveling valve technology
• Chosen by OEMs more often than any other valve brand
• Engineered to outlast all other leveling valves
• Made in the USA
CLASSIC VALVES
LOOK FOR THE HADLEY LOGOThe Hadley logo is always molded or cast into the outer valve housing and cannot be removed. If you cannot easily locate the Hadley logo, it is a counterfeit and should be rejected.
600 SERIES HEIGHT CONTROL VALVE• Cabin leveling • For Cab or light duty chassis applications
KITINCLUDESPRODUCT
H00600P H00600P valve, (2) levers and HPB450-43 linkage
650 SERIES HEIGHT CONTROL VALVE
• Cabin leveling • For tractor cab applications
KITINCLUDESPRODUCT
H00650UL H00650UL valve, (2) Levers, linkage ball stud, mounting stud and port plug
GLOBAL HEADQUARTERS Ph +1 616.530.1717 Fax +1 616.530.3283 | www.hadleyadvantage.com
5
Ride Control Systems
Smart Air Management Systems (SAMS™) by Hadley are electronically controlled air management systems that automatically level the vehicle
even in soft terrains or parking lots that prohibit jacks. SAMS systems are also the fi rst in the industry to be able to raise and lower the chassis
while moving at slow speeds.
• The only automated system integrated with the suspension to control jacks and air leveling
• Full integration results in greater dependability and less service and warranty issues
• Eliminates extra control panel for jacks
• Automatically controls the ride height of vehicle during normal road use resulting in a smoother ride
vs. mechanical control valve systems
• Once in motion, SAMS automatically and safely returns vehicle to ride height, if forgotten by the driver
• Built-in diagnostics
SAMSTM TL SystemTANKLESS OPERATION!
Light Duty ApplicationsMaintains ride height and provides raise/ lower capabilities
• Low-cost, compact automatic air suspension leveling system
• For vehicles without an air source
• Preassembled air compressor/dryer module includes angle sensor and fused harness
• Operates without connection to an external air reservoir
• Digital road fi ltering achieves maximum compressor life
• Digital monitoring protects the compressor by limiting maximum run time and duty cycle
• Fast & easy installation with preassembled and tested components
• Raise/Lower rear of vehicle for ease of loading, unloading and trailer hookup
• Maintains precise drive line angle (1/16” from spec.)
• Decreased air consumption vs. mechanical alternative
SAMSTM 2 Way SystemDelivery and Ambulance Applications
• Class 1-6
• 24/37 Pin ECU
• Dual 3D accelerometers
• 8-16 runs per day
• Multiple compressor options:
VIAIR, GAST, AMK, THOMAS
• Tilt feature for maintenance
• Diagnostic monitoring: LED Indicator, USB Connection
• Integrated air dryer with AMK compressor
• 2 angle sensors
GLOBAL HEADQUARTERS Ph +1 616.530.1717 Fax +1 616.530.3283 | www.hadleyadvantage.com
6
Ride Control Systems
• Class 1-6
• 37 Pin ECU
• Dual 3D accelerometers
• Raise and lower every 6 minutes
• Single Thomas Compressor
Twin Cylinder HC Thomas
Rated 2500 hours
• Tilt feature for maintenance
SAMSTM 3-4 Way System Transit and Limo Applications
• Diagnostic monitoring
LED Indicator, USB connection
• Exterior Parker air dryer
• 3-4 angle sensors
• Integrated cooling fan
• Multiple ride heights
• Self leveling
• Class 1-6
• 72 Pin ECU; Dual 3D accelerometers
• Bluetooth connectivity
• 5-10 runs per day
• Single or Dual AMK Compressors; 2 Stage AMK
• Tilt Feature for maintenance
• Diagnostic monitoring: LED Indicator, touch screen, USB connection
• Integrated air dryer
• 4 angle sensors
SAMSTM 4 Way System Recreational & Specialty Vehicle Applications
GLOBAL HEADQUARTERS Ph +1 616.530.1717 Fax +1 616.530.3283 | www.hadleyadvantage.com
7
Ride Control Systems
Sensor, Electronics and Valve in One Component
Hooking up to an off -centered trailer often damages the landing gear. The kingpin and trailer have to shift in order to align with the 5th wheel, which
causes the landing gear to move with the weight of the trailer bearing down on it. But with SmartValve on the drive axle suspension, bent landing
gear from coupling is a thing of the past.
SmartValve advances the safety of the suspension system, reduces air consumption, and maintains precise control of driveline angles. SmartValve’s
safety feature maintains accurate ride heights at all times using self-monitoring CAN signals, returning to ride height automatically at 7mph.
Reduce Landing Gear Damage, Suspension Wear, Air Consumption
SmartValve addresses a top source of trucking injuries and dramatically reduces workers’
compensation claims.
Utilizing the existing air suspension, the SmartValve allows the driver to raise the landing
off the ground, thus alleviating the pressure created with a loaded trailer, and reducing the
eff ort required to wind up the landing gear.
• Recruit/retain drivers
• Attract more diverse applicant pool
• Ease stress and aches from physical exertion
Increase Driver Safety & Satisfaction
Sensor, Electronics and Valve in One
Drop-and-Hook Made Faster, Easier, Safer
• Less cranking eff ort
• Fewer trips out of cab
• Eliminates injuries
• Reduce workers’ compensation premiums
Ask any driver handling 5 to 7 or more drop & hook operations a day, and they’ll be the
fi rst to agree that fatigue and injuries from cranking the landing gear takes its toll on their
comfort, safety & health.
SmartValve dramatically reduces the driver eff ort required in drop-and-hook. With a
mechanical valve, if the trailer is too high when coupling, drivers are forced to adjust the
landing gear with the weight of the trailer fully resting on the landing gear and suspension. The
result is more strenuous cranking and back strain, more time needed to adjust, and multiple
trips out of the cab.
In the same situation, but with a SmartValve, the driver can couple the tractor and trailer by
simply raising the tractor frame over ride height, thus lifting the trailer and load. This allows
for easy fi nal adjustment of the landing gear.
SmartValve’s benefi ts in saving time and eff ort, and eliminating injuries, can give your fl eet
a competitive advantage in recruiting and retaining drivers.
Ride Control Systems
Freightliner
Kenworth
Navistar
Peterbilt
Volvo
Mack
H00700R1A H00700R21A
H00700R2A H00700R22A
H00700R3A H00700R23A
H00700R4A H00700R24A
H00700R5A H00700R25A
H00700R6A H00700R26A
SMARTVALVE KITS for 6x4 TRACTORSMOD CENTER OR RETROFIT INSTALLATION
Single button operation for vehicles with dump switch
Dual button operation for vehicles without dump switch
PROGRAMMING KIT for 6x4 TRACTORS
Universal Programming & Diagnostic Kit
This software tool is required to program your SmartValve.
Only one kit is required for each fl eet/dealer and can be
used multiple times and for any SmartValve kit number.
Includes upgradeable fi rmware for ongoing diagnostic use
during the life of the SmartValve.
DESCRIPTIONPart #
H00700PK
SmartValve systems are specifi c to the truck make and require “active” J1939 250 Kbps Can Bus
for passive signal use. That signal is typically found on vehicles 2006 and newer.
SmartValve Interface Module All makes H18130SVMI
Pressure Sensor (sensor only) All makes H15926A
Control Harness Kit All makes with factory dump switch H18007SV
Control Harness Kit All makes - 2 button kit H17095SV
Valve Freightliner 6x4 with factory dump switch H02410RAS1
Valve (for 2 button kit) Freightliner 6x4 H02410RFS1
Valve Freightliner 6x2 H02410RNS1
Valve Kenworth 6x4 with factory dump switch H02410RBS1
Valve (for 2 button kit) Kenworth 6x4 H02410RGS1
Valve Navistar 6x4 with factory dump switch H02410RCS1
Valve (for 2 button kit) Navistar 6x4 H02410RHS1
Valve Navistar 6x2 H02410RQS1
Valve Peterbilt 6x4 with factory dump switch H02410RDS1
Valve (for 2 button kit) Peterbilt 6x4 H02410RJS1
Valve Peterbilt 6x2 H02410RRS1
Valve Volvo/Mack 6x4 with factory dump switch H02410RES1
Valve (for 2 button kit) Volvo/Mack 6x4 H02410RKS1
SMARTVALVE SERVICE KITSDESCRIPTION MAKE & CONFIGURATION OF TRACTOR Part #
Freightliner1 DATA CODE 888-082 for 6x4 w/pressure gauge 888-087 for 6x4 w/o pressure gauge
Freightliner2 DATA CODE 888-084 for 6x4 w/pressure gauge 888-083 for 6x4 w/o pressure gauge
Kenworth Contact Dealer
Navistar Contact Dealer
Peterbilt OAR CODE 1922640Volvo Contact Dealer
Mack Contact Dealer
OEM CODES for NEW 6x4 TRACTOR SPECIFICATION
1Freightliner New Generation 6x4 vehicles 2Freightliner Classic 6x4 vehicles