MegaPress® Jaws & Rings join 1/2" to 2" commercially-available Schedule 5-40 Black Iron Pipe when used with Viega® MegaPress® fittings.

NEW

NEW

2017-10-RIDGID

1 800 665 BOLT (2658) | raiderhansen.com

INDUSTRIAL & CONSTRUCTION

Industrial & Construction Safety, Fasteners, Tools, Abrasives, Chemicals and Shop Supplies

RIDGID AUTUMN SALEPrices in effect until December 31, 2017

RP 340 Press Tool Kit - 4"• ½" to 4" for Copper and Stainless Steel, ½" to 2" for PEX• Weighs only 8.3 lbs. • 270° rotating swivel barrel, for hard-to-reach connections • Industry-leading service interval of 42,000 cycles

Cordless 59-43358$3,899.00 /kit

Corded 59-43373$3,699.00 /kit

Compact MegaPress® Jaws• Compatible with RIDGID® Compact Press Tools

(RP 200-B, RP 210-B, RP 241, RP 100-B)

1/2"59-48433$195.00 ea

RP 241 Compact Press Tool (Bare Tool)• Multiple Size & System: up to 1 1/4" (32 mm) on Copper &

Stainless Steel; up to 1 1/2" (40 mm) on PEX tubing; and up to 3/4" (20mm) Iron Pipe.

• New 12V Lithium-Ion Battery - Bluetooth Connectivity

59-57388$1,449.00 ea

SeekTech ST-305 Line Transmitter• 5 watts, lets you energize metallic lines for tracing• Lightweight and compact transmitter• Can transmit two frequencies simultaneously.• Audio feedback confirms a good circuit before beginning a

trace

59-21898$1,120.00 ea

Electrical Tool Kits• Model RE 6

UC-60 Electrical Tool Kit (No Heads)• Crimp Heads Sold

Separately (59-56793)

59-52088$1,750.00 /kit

SeekTechInductiveSignal Clamp• 4” (100 mm)• Cable Length

16' 5" (5.02 m)• Apply a signal

to a cable or pipe when direct connection is not possible

• Compatible with all RIDGID® transmitters

59-20973$619.00 ea

SC-60C Scissor Cutter Head Kit• Includes: SC-60C Scissor

Cutter, 4P-6 4PIN™ Dieless Crimp Head, Swiv-L-Punch™ Knockout Punch Head

59-52093$3,605.00 /kit

Both Kits Include: 2 Lithium Ion Batteries, Battery Charger & Blow Molded Case

3/4"59-48438$219.00 ea

raiderhansen.com2

918 Roll Groover On 300 Base• The RIDGID® Model 918 Hydraulic Roll Groover features a

powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements. The 918 mounts quickly to RIDGID 300 power drive, 535, 1822, or 1224 Threading Machines. Designed to provide maximum efficiency, the 918 is capable of grooving up to 12" Schedule 10 and 8" Schedule 40 standard wall pipes.

59-48297$4,750.00 ea

Cutter Wheels for Pipe and Tubing

Prod. No. Material For Cutters SALE (Each)

59-44185 Steel & Ductile 360/820 $27.0059-44190 Stainless Steel 360/820 $38.0059-33100 Steel & Ductile 2A/42A/44S $12.0059-33120 Steel & Ductile 3S/4S/44S $19.0059-33160 Aluminum & Copper 10/15/20 $8.0059-33165 Steel 10/15/20 $10.0059-33170 Aluminum & Copper 154/156 $10.0059-33185 Aluminum & Copper 150/151/152/153 $8.0059-74720 PE/PB/PP 151/152/153 $16.00

• 55 Gallon

59-41585$1,099.00 ea

• 5 Gallon

59-74047$199.00 ea

• 5 Gallon

59-41575$149.00 ea

• 55 Gallon

59-76767$1,899.00 ea

Nu-Clear Thread Cutting Oil

• 1 Gallon

59-70835$33.00 ea

• 1 Gallon

59-74012$45.00 ea

Extreme Thread Cutting Oil• Works well with

import quality pipe

Model 975 Combo Roll Groover• The new, Model 975 Combo Roll Groover is two tools in one! • Mounts on the RIDGID 300 Power Drive for machine

grooving jobs, but is also designed to manually groove in-place pipe

• Roll available for copper

59-25638$1,111.00 ea

No. 276 Soil Pipe Cutter• Provides one stroke cutting of 1 1/2"-6" service weight, No

Hub® soil pipe, clay and concrete pipe. Makes repeated cuts quickly

• Expand capacity up to 8" service weight soil pipe by ordering 33665 Chain Extension Assembly

59-74207$619.00 ea

No. 226 In-Place Soil Pipe Cutter • Compact & lightweight tool designed to cut hub 1½" (40 mm)

to 6" (150 mm) and hubless soil pipe in tight quarters• Only 17" (43 cm) long, perfect for cutting cast iron, cement

and clay pipe where space is limited• For against-the-wall and other tight quarter applications

59-69982$740.00 ea

238-P Powered Soil Pipe Cutter • Operates using a 1/2" square drive impact driver or ratchet• Cuts 8" diameter soil pipe when used with an impact driver

(minimum 200 ft-lbs) or 4" manually• 11.5" (29.5 cm) length, removable handle, low profile cutter

wheels and compact design fits into tight places in both overhead and below grade applications

• Lightweight, Easy Set-Up, Two-Directional Operation, Durable

59-42878$725.00 ea

2 TOOLSIN 1

COPPER ROLLS AVAILABLE

We Stock a Big Inventory and Variety of RIDGID Cutter Wheels - Call Us!

3

Ball Transfer Head for VJ Stand• Ball head allows pipe to slide and rotate easily• Fits easily onto V Head Pipe Stands (VJ-98, VJ-99, VF-99)• Ideal for use with threading machines, roll grooving, or other

pipe working applications

59-37997$198.00 ea

Model 300 Power Drive (Complete)• RIDGID® speed chuck• Reversible 1/2 HP universal motor• Ideal for use with RIDGID roll groovers

59-15682$5,299.00 ea

Model 1215 Compact Threading Machine• Lightweight, portable design• Pipe Capacity 1/4"-1 1/2" (6mm-37mm)• Bolt Capacity 5/16"-1" (6mm-25mm)

59-61142$4,085.00 ea

RJ99 Roller Head High Pipe Stand • Rollers center pipe and allow rotation• Locking ring allows for quick vertical height adjustments• Ideal for use with threading machines, roll grooving, or other

pipe working applicationsSpecifications: Height 32 - 55", Max. Pipe Capacity 12", Max.

Weight Capacity 1,000 lbs, Weight 27 lbs.

59-56672$135.00 ea

VJ99 V-Head High Pipe Stand• Locking ring allows for quick vertical height adjustments• Handle design makes it easier to use when working in tight

places and with larger pipe fittingsSpecifications: Height 28 - 52", Max. Pipe Capacity 12", Max.

Weight Capacity 2,500 lbs, Weight 23 lbs.

59-56662$98.00 ea

K400 Drum Machine• Locking ring allows for quick vertical height adjustments• Handle design makes it easier to use when working in tight

places and with larger pipe fittings• Auto Feed option availableSpecifications: Height 28 - 52", Max. Pipe Capacity 12", Max.

Weight Capacity 2,500 lbs, Weight 23 lbs.

59-52363$675.00 ea

K400 Drum Machine (Kit)• Locking ring allows for

quick vertical height adjustments• Handle design makes it easier to use when working in tight

places and with larger pipe fittingsSpecifications: Height 28 - 52", Max. Pipe Capacity 12", Max.

Weight Capacity 2,500 lbs, Weight 23 lbs.

59-27008$915.00 /kit

AUTOFEED

MODEL!

FOLDINGLEG VERSION AVAILABLE!

Model 258 Power Pipe Cutter • Cuts 2-1/2" (65 mm) to 8" (200 mm) schedule 10*/40 steel

pipe, galvanized pipe, rigid conduit, etc. • Square cut with minimal burr on either 21 ft (6m) or nipple

lengths of pipe

59-50767$3,900.00 ea

Model 258XL Power Pipe Cutter • 8" (200 mm) to 12" (300 mm) diameter pipe cutting capacity • Square cut 21ft (6m) or nipple lengths of pipe without effortIncludes: 774 Square Drive Adapter, Ball transfer Pipe

Support 2-1/2" (65mm) to 12" (300mm), Cutter Wheel Assembly, Pump, HF32 Hydraulic Foot (includes 2 HD Cutter Wheels, Hub w/pins, Cover Plate) Hydraulic RAM

59-58227$3,860.00 ea

NEW

CS6/CS6x Carrying Case• Protect your CS6/CS6X digital montor and batteries with

a durable Ridgid carrying case, CS6/CS6x, batteries and charger sold separately

59-59323$88.00 ea

raiderhansen.com4

SeeSnake® CS6x Digital Recording Monitors with Wifi • Wi-Fi and Bluetooth - Stream or record inspections • Capture images and video directly to a USB drive• Water-resistant keyboard• Mounts to the SeeSnake Max rM200 docking handle for easy

transport and storage• Daylight Viewable Display for a crisp, clear, in-pipe image

59-56803$2,660.00 ea

SeeSnake® CS6x Digital Recording Monitor Kit with WiFi , 2 Batteries and 1 Charger• Wi-Fi and Bluetooth - Stream or record inspections to an iOS

or Android phone or tablet with the free HQx Live companion app. Capture images and video directly to a USB drive

• Water-resistant keyboard • Mounts to the SeeSnake Max rM200 docking handle for easy

transport and storage• Daylight Viewable Display for a crisp, clear, in-pipe imageIncludes: Set of (2) 2.0Ah Batteries & (1) 120V Charger

59-57138$3,130.00 /kit

SeeSnake® CS65x Digital Reporting Monitor Kit with WiFi , 2 Batteries and 1 Charger• Introducing our first digital reporting monitor to include Wi-Fi

and Bluetooth® connectivity. • Ability to stream and/or record inspections to the latest iOS

or Android device• Internal and External USB storage option• Internal GPS to geotag mediaIncludes: Set of (2) 2.0Ah Batteries & (1) 120V Charger

59-55978$5,599.00 /kit

SeeSnake® CS6xPak Digital Recording Monitor Kit with WiFi , 2 Batteries and 1 Charger• Wi-Fi and Bluetooth - Stream or record inspections to an iOS

or Android phone or tablet with the free HQx Live companion app

• Capture images and video directly to a USB drive• Water-resistant keyboard• Docks onto the SeeSnake Compact2 and quickly detaches

for convenient placement • MPEG4 (H.264) 30 FPS Video Format / JPEG Photo Format• 5.7" (145 mm) Colour LCD Display, Daylight ViewableIncludes: Set of (2) 2.0Ah Batteries & (1) 120V Charger

59-57143$3,130.00 /kit

MR10 Magnetic Locator• Quickly locate buried iron or steel objects• Ergonomic rugged design includes carrying case

and batteries• Highly sensitive instrument with audio and visual feedback.• AutoNull feature blocks out nearby metallic interference such

as an automobile or chain link fences

59-53068$1,050.00 ea

NEWNEW

NEW

NEW

NEW

Hand-Held Micro CA-350 Inspection Camera• Inspection and

documentation made easy• now with 12V powerIncludes: micro CA-350 with 17mm imager, battery, charger,

USB cable, hook, magnet and mirror accessories, RCA cable, AC adapter, headset with microphone, 8GB SD card

59-55898$555.00 ea

6 mm Imager with 4 m Cable• Accessory for CA-350• 6mm head with 4 metre

extension cord

59-37093$249.00 ea

6 mm Imager with 1 m Cable• Accessory for CA-350• 6mm head with 1 metre

extension cord

59-37098$149.00 ea

NaviTrack Scout® Locator®

• Designed to solve the most demanding remote transmitter (sonde) locates using multi-directional locating technology

59-19238$1,770.00 ea

micro LM-100 Advanced Laser Distance Meter• Ultra Sharp Class II Lasers• Accurate measurements up to 164'

(50 m)• Adjustable units to quickly read feet,

inches or meters• Bright backlit display• Quick and accurate calculations• Displays the last 3 measurements,

stores the last 20 measurements

59-36158$249.00 ea

5

SeekTech SR-60 Locator• Fast, confident locates even under tough locate conditions

(poor conductors, poor soil conditions, poor grounding, etc.)• Trace any frequency from 10 Hz to 490 kHz• Trace energized lines and sondes (beacons) simultaneously• Has all the ease of use and accuracy of the SR-20 but with

ALL locatable frequencies

59-22163$3,820.00 ea

SeekTech SR-20 Locator• Target line and guidance arrows quickly identify distortion.• Proximity signal and signal strength help work through

difficult locates.• Trace any frequency from 10 Hz to 35 kHz• 4 C Cell batteries included

59-21893$3,050.00 ea

K-45 Sink Machine• 3/4" to 2 1/2" (20 mm to 75 mm) Drain Lines• Excellent for small line cleaning: Opens clogged lavatory,

sink lines, urinals and tub or shower drains• 2-way AUTOFEED® control for clean work – advances and

retrieves cable with push of a lever• Lightweight, easy to use, no set up required

59-35473$449.00 ea

K-60SP Sectional Drain Machine• Compact machine

for institutional, commercial or residential cleaning

• Ideal for septic tank vacuum truck operators

• 1/2 HP motor, CSA approved• K-60SP Machine with A-1 Operator’s Mitt,

A-12 Pin Key, and A-60-12 Rear Guide Hose

59-66492$1,899.00 ea

K-1500B SectionalMachine• 2" to 8" (50 mm to 200 mm)

Drain and Sewer Lines• K-1500B Machine with A-1 Mitt, A-12 Pin Key, and A-34-12

Rear Guide Hose, Plus: Seven Sections 11/4" (32 m) (C-11) Cable, Total 105' (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set; 115V

59-23717$3,660.00 ea

SeeSnake® 100' (30M) microReel L100C (CA-350) Counter NTSC*• Line inspections up to 100' (30m)• 1 1⁄2" to 4 / 5" (40 - 100 / 125 mm)* lines up to 100' (30 m)• Passes 90° bends in most 50 mm lines• Small size and maneuverability for small diameter and

tight-turn radius inspections• Multi-monitor compatibility with existing SeeSnake monitors,

or the micro CA-300 digital inspection camera• 4" (100 mm) when used with a microEXPLORER or micro

CA-300 or 5" (125 mm) when used with SeeSnake monitor

59-35188$4,300.00 ea

KJ-1750 Water Jetter with Cart• KJ-1750 Jetter with Dual Pulse: H-41, H-42, and H-44 1/8"

NPT Nozzles, H-51 and H-52 1/4" NPT Nozzles, 50' x 1/8" (15.2m x 3.2mm) Sink Trap Hose, Nylon Storage Bag, Nozzle Cleaning Tool

• H-30 Cart Included

59-62697$4,220.00 ea

KJ-3100 Water Jetter with Hose & Reel• KJ-3100 Jetter with Pulse: H-111 and H-112 1⁄4" NPT

Nozzles, H-38 Hose Reel with 200' x 3⁄8" (61 m x 10 mm) ID Jet Hose, 50' x 3⁄8" (15 m x 10 mm) ID Jet/Wash Hose, FV-1 Foot Valve, Nozzle Cleaning Tool, HW-30 Wash Wand, Root Ranger Root Cutting Nozzle, HF-4 Quick Connect Hose

59-37413$7,850.00 ea

CALL USFOR SEESNAKE®

RENTALS604 291 7442

SR-24 Line Locator with Bluetooth® and GPS• Precision utility locating instrument with GPS and Bluetooth• Features: Large Display, Omni-directional Antennas, Built-In

GPS, Bluetooth Technology, Smartphone/Tablet App. Can trace any frequency from 10 Hz to 35,000 Hz.

59-44473$3,470.00 ea

raiderhansen.com6

Heavy-Duty Straight Pipe Wrenches• Straight Pipe Wrenches have a sturdy, ductile-iron housing

and an I-beam handle with a full floating forged hook jaw, featuring self-cleaning threads with replaceable hook and heel jaws

• Heavy-duty pipe wrenches comply with federal specifications GGG-W65IE, Type II, Class A

Size Part No. SALE (Each)

6" 59-31005 $27.0010" 59-31010 $36.0012" 59-31015 $42.0014" 59-31020 $46.0018" 59-31025 $67.0024" 59-31030 $106.0036" 59-31035 $228.0060" 59-31045 $522.00

Hook & Heel Jaws for HD Pipe Wrenches• Always Insist On Genuine RIDGID® Parts

Size Hook Jaw SALE (Each) Heel Jaw SALE (Each)

6" 59-31555 $16.00 59-31560 $7.008" 59-31580 $16.00 59-31585 $9.00

10" 59-31605 $21.00 59-31610 $12.0012" 59-31630 $24.00 59-31635 $15.0014" 59-31655 $28.00 59-31635 $15.0018" 59-31670 $40.00 59-31675 $20.0024" 59-31695 $61.00 59-31700 $30.0036" 59-31720 $128.00 59-31725 $50.0048" 59-31745 $191.00 59-31750 $80.00

Chain Wrenches• A double jaw gives fast, ratchet-like action in

either direction• The heavy-duty model has replaceable alloy steel jaws• The light-duty model has a one- piece forged alloy steel

handle and jaw. Ideal for use in close quarters

Size Part No. SALE (Each)

C12 CHAIN 59-31310 $77.00C14 CHAIN 59-31315 $98.00C18 CHAIN 59-31320 $147.00C24 CHAIN 59-31325 $170.00C36 CHAIN 59-31330 $350.00

Strap Wrenches• Best for polished pipe• Strong, woven nylon strap gives tight grip• Two models available with special strap for plastic pipe

Model No. Strap Length

Strap Width Part No. SALE

(Each)2 24" 1-1/8" 59-31350 $64.005 29-1/4" 1-3/4" 59-31360 $103.00

Sewer CablesPart No. Model Cable Type Length Fits Machine SALE (Each)

59-62225 C-1 5/16" w/Bulb Auger 25' C-26, K-39, K-40, K-50 $56.0059-56787 C-21C 5/16" IC Drop Head 25' C-26, K-39, K-40, K-50 $74.0059-62260 C-6 3/8" w/Male Coupling 35' K-39, K-40, K-50 $96.0059-62270 C-8 5/8" Open Wind 7.5' K-50, K-60 $33.0059-62275 C-10 7/8" Open Wind 15' K-60, K-75 $68.0059-62280 C-11 1-1/4" Open Wind 15' K-1500, K1500SP $112.0059-37847 C-32 3/8" Inner Core 75' K-380, K-400, K-3800 $185.0059-55467 C-46 1/2" Inner Core 90' K-750, K-6200, K-7500 $286.0059-37643 C-24 HD 5/8" Inner Core 100' K-7500 $372.0059-43647 C-24 5/8" Inner Core 100' K-750, K-6200, K-7500 $372.0059-41697 C-100 3/4" Inner Core 100' K-750, K-7500 $476.00

Drain Cutters & AugersPart No. Style Fits Cable Drain Size SALE (Each)

59-62995 Bulb Auger 1-1/8" 3/8" IC, 3/8" 1W, 1121W 1-1/4" - 3" $18.0059-63065 Drop Head 3/8" IC, 3/8" IW, 1/2" IW 1 -1/4" - 3" $20.0059-63035 Grease Cutter 1-3/8" 3/8" IC, 318" IW, 1/2" IW 2" - 4" $20.0059-62855 Funnel Auger 1/2" IC, 7/8" Sectional 2" - 4" $28.0059-62880 Spade Cutter 1/2" IC, 7/8" Sectional 2" - 4" $26.0059-62860 Sawtooth Cutter 2-1/2" 1/2" IC, 7/8" Sectional 3" - 4" $66.0059-92485 P-Trap Cutter 3" 5/8" IC, 3/4" IC 4" - 10" $28.0059-92495 Spear Cutter 1-3/4" 5/8" IC, 3/4" IC 3" - 10" $24.0059-92525 Double Cutter 4" 5/8" IC, 3/4" IC 6" - 10" $33.0059-62840 Straight Auger 1-1/4" Sectional 2" - 8" $34.0059-63205 Grease Cutter 2-12" 1-1/4" Sectional 4" - 8" $35.0059-98035 Sharktooth Cutter 3" 1-1/4" Sectional 4" - 8" $46.00

B-500 Transportable Pipe Beveller • Set-up and bevel 10" diameter

schedule 40 pipe in 45 seconds!• Cool to touch immediately following bevelling• Accurate bevel angle around diameter of the pipe for optimal

number of cover passes• Adjustable land width from 0" to 3/16" • 6 replaceable cutter inserts work simultaneously to produce

a machined finish

59-49298$3,995.00 ea

Straplock Pipe Handle• Securely grips

plastic pipe from 3" - 8" (80mm – 220mm) allowing force to be applied in all directions. Simplifies the installation and maintenance of large diameter plastic pipe applications.

59-42478$40.00 ea

NEW

7

16 Gallon Motor-On-Bottom Wet/Dry Vac (1650RV)• 16-gallon industrial wet/dry vacuum featuring an innovative

motor on the bottom design that delivers incredible performance, improved stability, noise reduction, large capacity, rugged construction, and excellent mobility for pro, contractor and industrial use

59-50338$272.00 ea

16 Gallon Stainless Steel Wet/Dry Vac with Cart (1610RV)• Top of the Line 6.5 Peak Horsepower • Attractive Stainless Steel Drum Construction • Scroll Noise Reduction® TechnologyIncludes: Vacuum, 2 extension wands, 1-7/8” x 8’ premium

locking pro hose, utility nozzle, wet nozzle, crevice tool, car nozzle, and fine dust filter

59-50353$245.00 ea

VF3500 Qwik Lock™ 3-Layer Fine Dust Filter • 3 layers of filtering material and pleated design offers a large

surface area to trap superfine dust and dirt• Captures 99% of all particles 1/2 micron and larger• Great for picking up cold fireplace ash, fine dust and

everyday dirt• Fits RIDGID vacuums 3 to 4.5 gallons• Fully washable and reusable

59-26643$23.00 ea

4 Gallon Portable Wet/Dry Vac (4000RV) • Powerful 5.0 Peak Horsepower• Compact Form Ideal for Portability and Storage• 20’ Power Cord, Cord-Wrap• Rugged Polypropylene Drum ConstructionIncludes: Vacuum, owner's manual, 2 extension wands,

1-7/8” x 8’ premium locking pro hose, car nozzle, noise muffler/diffuser and fine dust filter

59-50313$130.00 ea

4.5 Gallon ProPack® Wet/Dry Vac (4500RV)• Unique, Toolbox Design for Portability and Easy Storage • 5.0 Peak Horsepower• 20' Power Cord • Large Cushioned Handle, Flat Top Work Surface• Rugged Polypropylene Drum Construction Includes: Vacuum, owner's manual, 2 extension wands,

1-7/8” x 2-7’ expanding hose, utility nozzle, dusting brush, crevice tool, and fine dust filter

59-50318$151.00 ea

6 Gallon Wet/Dry Vac (RV6000)• Incredible 4.25 Peak Horsepower• 360° Caster Wheels• 10' Power Cord for Long Reach• Rugged Polypropylene Drum ConstructionIncludes: Vacuum, owner's manual, 2 extension wands,

1-7/8” x 8’ premium locking pro hose, utility nozzle and standard filter

59-50308$99.95 ea

Step Up To Industrial Quality!

12 Gallon Motor-On-Bottom Wet/Dry Vac (1250RV)• Unique Motor-On-Bottom Design delivering 6.5 peak HP• New design provides stability and makes accessing the filter

and emptying the drum easier • 360° Caster WheelsIncludes: Vacuum, owner's manual, 2 extension wands,

1-7/8” x 8’ premium locking pro hose, utility nozzle, wet nozzle, car nozzle, and standard filter

59-50333$215.00 ea

16 Gallon 2-Stage Wet/Dry Vac (RV2600)• 11.5 Amp 2-Stage Motor• Sturdy Cart, Push Handle & Large Non-Marring Wheels, 25’

Power Cord, Rugged 2-Piece Drum• Scroll Noise Reduction® TechnologyIncludes: Vacuum, owner's manual, 2 steel extension wands,

1-7/8" x 10' premium locking pro hose, floor tool with 3 inserts (floor nozzle, squeegee and carpet cleaning nozzle), multipurpose nozzle, crevice tool, muffler/diffuser, and fine dust filter

59-50363$431.00 ea

14 Gallon Wet/Dry Vac with Cart (1400RV) • Powerful 6.0 Peak Horsepower High Performance• 20’ Power Cord, Cord Wrap• Scroll Noise Reduction® TechnologyIncludes: Vacuum, owner's manual, 2 extension wands,

1-7/8” x 8’ premium locking pro hose, utility nozzle, wet nozzle, crevice tool, car nozzle and fine dust filter

59-50348$215.00 ea

* All items available while quantities last. Sorry, no rain cheques. Not all products may be exactly as shown. While every effort is made to ensure accuracy, we cannot be held responsible for errors and omissions. 2017-10-RIDGID

10 BC Locations

Proud Members of:Abbotsford NEW!T: 604 859 2658

AldergroveT: 604 607 0491

BurnabyT: 604 291 7442

ChilliwackT: 604 792 2664

DeltaT: 604 946 1719

LangleyT: 604 530 0224

NanaimoT: 250 751 1239

PentictonT: 250 492 8514

Port KellsT: 604 888 2669

VictoriaT: 250 383 0223

Raider SafetyT: 604 421 6107

Repair CentreT: 604 530 0224

FREE INSPECTION & CONSULTATION

RAIDER HANSEN NOW REPAIRS MOSTRIDGID® EQUIPMENT INCLUDING:

NEW REPAIR CENTRE:604 530 0224

FIX IT NOW• Hand & General Tools• Pipe Threading Machines• Drain Cleaning Machines

• SeeSnake Diagnostic Equipment• SeekTech Utility Diagnostic Equipment

SERVICE • TRAINING • SITE DEMOMOBILE REPAIR • CONSULTATION

micro LM-400 Advanced Laser Distance Meter• Large, backlit, 4-line display• Inclination angle measurement for

hard-to-reach areas• Adjust units to inches, feet or meters• Bluetooth® connection• Android® and iOS® Apps to overlay

measurements onto a photo or sketch

59-36813$299.00 ea

PEX-One™ 12V Battery ASTM Tool Kit• One Handed Operation, Access Tight Spaces• Interchangeable dies to press ½", ¾" and 1" fittings• Full power for 150+ crimps on a single chargeIncludes: PEX-One ASTM Tool, Dies, Die Caddy, RIDGID bag, 12V Battery and Charger

59-54253$799.00 /kit

We are BC’s Largest Stocking RIDGID® Distributor

Micro CA-25 Inspection CameraIncludes: • micro CA-25 with 17mm imager• 3' (90 cm) RCA cable• 4 AA batteries• mirror• hook and magnet • blow-molded case

59-40043$139.00 ea

Model 300 Compact Threading Machine• 1/2" - 2" NPT Hammer Chuck• Includes 250 Folding Wheel

Stand • Lightweight, portable• Fast transport & set-up• Quiet operation

59-67182$6,999.00 ea

10 Gallon ProPak® Wet/Dry Vac (1000RV)• Powerful 5.0 Peak Horsepower• Telescoping Handle and Large Rear Wheels• Rugged Polypropylene Drum Construction• 1-7/8" x 2'-7' Expanding Ultra-flexible Locking Hose

59-50328$186.00 ea

12 Gallon Wet/Dry Vac (1200RV)• Powerful 5.0 peak HorsePower• Rugged Polypropylene Drum Construction & Durability• 360° Caster WheelsIncludes: Vacuum, owner's manual, 2 extension wands,

1-7/8” x 8’ premium locking pro hose, utility nozzle, wet nozzle, car nozzle, and standard filter

59-50323$146.00 ea

3X the Repair Staff for Faster Service!

KJ-3800 Drain Cleaner with Tool Kit • 3⁄4" (20 mm) to 4" (110 mm) Drain Lines • Max drum capacity is 100' (30,5 m) of 3⁄8" (10 mm) or 90'

(27 m) of 1⁄2" (12 mm) continuous length cable • K-3800 Machine with: C-32, 3/8" x 75' (10 mm x 22.8.2 m)

Cable, T-202 Bulb Auger, T-205 “C” Cutter, T-211 Spade Cutter, A-13 Pin Key, Pair of Gloves

59-53117$1,649.00 ea