RidgidHandTools

General Purpose Hand Tools• Wide selection of accessory tools & equipment.• Proven durable designs.

Type No. of Models Page Bench Vises 3 7.2

Anvils 1 7.3

Levels 2 7.3

Hammers 10 7.4

Saws 3 7.5

Saw Blades 11 7.5

Tool Box 1 7.6

Tape Measures 2 7.6

Folding Rulers 4 7.7

Screwdriver 1 7.7

Pliers 9 7.8

Snips 12 7.9

Knockout Sets 2 7.10 – 7.11

Cable Cutter 1 7.11

Cable Trimmer 1 7.12

Bolt Cutters 9 7.12

Shovels 9 7.13

Screw Extractors 15 7.14

Replacement Drill Guides 10 7.15

Twist Drills 9 7.15

Electrical Wire Cutting, 11 7.16 – 7.17 Stripping and Crimping

Thermometer 1 7.18

7.1

07_General Hand tools.indd 207_General Hand tools.indd 2 4/24/06 10:03:25 AM4/24/06 10:03:25 AM

F-Series Vise AccessoriesMagnetic Jaw CoversMagnetic Jaw Covers assist with specialty clamping applications. These high quality covers give you greater fl exibility when working with your F-Series Vise.

• AJ/Smooth Aluminum - General use and non-marring surfaces.

• FJ/Fiber Cover - For gripping hardened non-marring surfaces.

• RJ/Soft Rubber - For delicate, irregular work pieces.

Aluminum FiberSoft Face

Bench Vises The F-Series vises are constructed of 75,000 psi tensile strength forged steel. These sleek, rugged vises out perform their bulky cast-iron competition.

RIDGID F-Series vises feature a patented parallel jaw alignment system.This exclusive feature gives the F-Series precise clamping action, as well as longer service life.

F-Series Also Features:• All-steel, drop-forged construction.

• Rolled double lead Acme screw.

• Steel handle with rubber anti-pinch rings.

• Increased work areas.

• Standard fi xed pipe jaws.

• Large, hardened anvil.

• Surface hardened slides for smooth, precise operation.

• Forged steel swivel base with dual draw-down bolts.

• RIDGID Lifetime Warranty.

Catalog Model Weight No. No. lb. kg

66987 F-45 41/2" Forged Vise 26 11.9 66992 F-50 5" Forged Vise 48 21.6 66997 F-60 6" Forged Vise 63 28.6 69907 – Swivel Base Assembly for F-45 3 1.4 69912 – Swivel Base Assembly for F-50 & F-60 6 2.8

Vise Ordering Information

7.2

Weight lb. kg

Aluminum Magnetic Jaw Covers 69847 69852 69857 1.0 .50 Fiber Magnetic Jaw Covers 69862 69867 69872 1.0 .50 Soft-Faced Magnetic Jaw Covers 69877 69882 69887 1.0 .50

Infi nitely adjustable swivel baseallows vise to lock securely in any position.

Large capacity pipe jaws for secure clamping

Generously sized jaws provide greater clamping surface.

Description

Vise Model F-45 F-50 F-60


7.3

No. 395Torpedo Level

No. 72424" Aluminum Level

Nightshade Torpedo LevelIdeal for general use and work in tight places. Glow in the dark vial frames for dark areas. Three vials for plumb, level and 45° miter. Three (3) strong rare earth magnets. V-grooved edge for pipe and conduit work. Large top-read level vial No. 395.

Aluminum Level Top-reading, extruded aluminum level. Milled top for exacting precision.Full length magnetic base No. 724.

Body in. mm

87097 395 9" Torpedo Level 9 229 5⁄8 x 11⁄4 16 x 32 1⁄3 0.15 1 87107 724 24" Top-Read Magnetic Aluminum Level 24 610 1 x 21⁄4 25 x 57 11⁄8 0.6 1

CatalogNo. Description

ModelNo.

Weight lb. kg

Length in. mm

Std.Pack

Levels

Anvils

Catalog Model Width Length Length Total Total Weight Std. No. No. of Face of Face of Horns Length Height lb. kg Pack

69642 12 51⁄4 12 81⁄2 281⁄2 121⁄4 103⁄4 x 131⁄2 275 125 1 68622 5 3 8 51⁄2 183⁄4 8 63⁄4 x 73⁄4 77 35 1 69632 9 5 101⁄2 71⁄2 25 101⁄2 91⁄4 x 11 165 75 1

Forged Anvils The Peddinghaus® anvil has long stood for quality and craftsmanship. Peddinghaus anvils are drop-forged and produced entirely from high grade steel for maximum durability. The top face is ground and induction hardened to provide a lively surface to work on.

Model #12 comes equipped with a pritchel hole to support the use of various tools. Model #12 also features an upsetting block.

Base


Ball Pein Hammer

Ripping Claw Hammer

Hand Drilling Hammer

Short Handle Sledge Hammer

RIDGID hammers feature high-quality steel heads. Individual sections are tempered steel for strength, hardness and resiliency. Wood handles are select grain burnished hickory. Claw hammers feature impact-resistant fi berglass handles with no-slip cushion grip.

52475 116 16 oz. Curved Claw Hammer 16 oz 454 g 131⁄4 337 11⁄2 0.7 4 52480 120 20 oz. Curved Claw Hammer 20 oz 567 g 131/4 337 13⁄4 0.8 4 52485 216 16 oz. Ripping Claw Hammer 16 oz 454 g 131/4 337 11⁄2 0.7 4 52490 220 20 oz. Ripping Claw Hammer 20 oz 567 g 131/4 337 13⁄4 0.8 4 52450 012 12 oz. Ball Pein Hammer 12 oz 340 g 13 330 11⁄8 0.6 6 52455 016 16 oz. Ball Pein Hammer 16 oz 454 g 14 356 11⁄2 0.7 6 52465 024 24 oz. Ball Pein Hammer 24 oz 680 g 151⁄2 394 21⁄8 1.0 6 52470 032 32 oz. Ball Pein Hammer 32 oz 907 g 16 406 23⁄4 1.3 6 52495 250 21⁄2 lb. Short Handled Sledge 21/2 lb 1.1 kg 151⁄2 394 31⁄4 1.5 4 52505 303 3 lb. Hand Drilling Hammer 3 lb 1.4 kg 10 254 31⁄2 1.6 4

Head Weight

oz./lb. kg/gDescription

CatalogNo.

ModelNo.

Hammers & HandlesStandard

Pack

Weight

lb. kg

Hammer Ordering Information

Overall Length

lb. kg

Hammers

7.4

Curved Claw Hammer


7.5

Saws No. 212 Pro Arc Designed to offer superior strength and maximum control in a lightweight professional hack saw. The bow frame casting provides both greater strength and improved work piece access. Blade replacement is a snap with the large tensioning knob and the rubberized hand grips fore and aft ensure a controlled and speedy cut. In addition, the 212 Pro Arc provides two positions for mounting the blade (either 45° or 90° cut angles) to handle the job.

No. 1205 PVC/ABS Saw Designed for cutting plastic pipe, plywood and veneers. Has an aluminum handle and 18" blade with replacements available in either 12" or 18" lengths.

No. 212 Pro Arc Hack Saw

Weight

lb. kg

20238 212 Pro Arc Aluminum Hack Saw 150522 1205 18" PVC/ABS Pipe Saw 7⁄8 0.4 650527 1205-1 12" Replacement Blade 3⁄8 0.1 150532 1205-2 18" Replacement Blade 1⁄2 0.2 1

CatalogNo. Description

Std. Pack

ModelNo.

Note 18" Blade standard with Model 1205

Choice of Standard, Alloy or Bi-Metal High Speed Blades in 10" or 12" lengths.

Standard Alloy Hack Saw Blades These blades are especially designed for general use by plumbers, electricians, maintenance men and home handymen.Teeth have been hardened for extra-long service life.

Bi-Metal Blades Bi-Metal Blades have high-speed steel teeth electron-beam-welded to tough, yet fl exible die steel backing to produce the best possible performance in a premium quality blade.

Catalog Model Blade Size Teeth Blades Weight Std. No. No. in. mm Per Inch Per Pack lb. kg Pack

35900 1024-A 10" Standard Hack Saw Blade 10 x 1⁄2 250 x 12 24 10 1⁄2 0.2 1 35910 1218-A 12" Standard Hack Saw Blade 12 x 1⁄2 300 x 12 18 10 1⁄2 0.2 1 35915 1224-A 12" Standard Hack Saw Blade 12 x 1⁄2 300 x 12 24 10 1⁄2 0.2 1 35920 1232-A 12" Standard Hack Saw Blade 12 x 1⁄2 300 x 12 32 10 1⁄2 0.2 1 57577 1218-A 12" Standard Hack Saw Blade 12 x 1⁄2 300 x 12 18 100 41⁄2 2.0 1 57582 1224-A 12" Standard Hack Saw Blade 12 x 1⁄2 300 x 12 24 100 41⁄2 2.0 1 93785 1218-BM 12" Bi-Metal Hi-Speed Hack Saw Blade 12 x 1⁄2 300 x 12 18 10 1⁄2 0.2 1 93790 1224-BM 12" Bi-Metal Hi-Speed Hack Saw Blade 12 x 1⁄2 300 x 12 24 10 1⁄2 0.2 1 56847 1218-BM 12" Bi-Metal Hi-Speed Hack Saw Blade 12 x 1⁄2 300 x 12 18 100 41⁄2 2.0 1 56852 1224-BM 12" Bi-Metal Hi-Speed Hack Saw Blade 12 x 1⁄2 300 x 12 24 100 41⁄2 2.0 1 56857 1232-BM 12" Bi-Metal Hi-Speed Hack Saw Blade 12 x 1⁄2 300 x 12 32 100 41⁄2 2.0 1

Standard Alloy and Bi Metal High Speed Hack Saw Blades

Standard Alloy Saw Blades

No. 1205 PVC/ABS Saw

Bi-Metal High-Speed Hack Saw Blades

Description


7.6

Tool Box

Tape Measures

No. 606 Standard Shape with Tray Padlock provision on catch. Heavy-duty tray with handle.

Heavy-duty tool boxes for tradesmen’s use. Made of 18-gauge, cold-rolled prime steel. Two heavy-duty plated trunk-type catches. Plated top handle. Electrically welded construction. Continuous piano hinge. Durable baked red enamel fi nish, electrostatically sprayed.

Locking Steel Tapes

Locking Steel Tapes Blade locks in place, rewinds automatically. Chromium-plated, inside-outside case has button control for tape locking and power rewinding.

Removable belt clip. Tempered steel blade is fi nished in yellow enamel and coated with Mylar® for lasting protection. Reinforced blade prevents breakage at the tip. Self-adjusting inside-outside end hook. Stud marks every 16".

Long Steel Tapes Durable case has vinyl covering over rust-resistant coated steel liner. Nickel-plated fi ttings. Push pin easily opens fold-in-rewind handle. Easy-to-read white steel tape shows inches in black, feet in red. 16" centers clearly indicated. Folding end hook holds fi rmly and releases easily.

Replaceable blades available for all models.

Weight

oz. g

Length

ft. mStandard

Pack

20213 636 16' Tape 3⁄4 19 16 5 10 238 6 20218 671 25' Tape 1 25 25 7.6 171⁄8 492 6 20208 632 100' Tape 1 25 100 30.5 143⁄4 419 1

Locking Steel Tapes

CatalogNo.

ModelNo.

Width

in. mm

Long Steel Tapes

Dimensions – L x W x H

in. mm Catalog

No.Model

No.

33085 606 Standard Shape w/Tray 20 x 81⁄2 x 91⁄2 508 x 216 x 241 191⁄2 8.8 1

Weight

lb. kgStd.

PackDescription

Description


7.7

Rulers

Length

ft. m

No. 1620Fiberglass 6' Extension Rule with 6" Extension Slide.

No. 1619FFiberglass 6' InsideFlat Reading Rule

73365 1619 6' Outside Reading 5⁄8 16 6 1.8 7 198 6 73370 1619F 6' Inside Flat Reading 5⁄8 16 6 1.8 7 198 6 73360 1620 6' Extension Rule 5⁄8 16 6 1.8 7 198 6 81280 1602 2m Metric Rule 5⁄8 16 6' 63⁄4" 2 7 198 6

Fiberglass Folding Rules

CatalogNo.

ModelNo.

Description Std.Pack

Fiberglass Folding Rules Precision made of fl exible heavy-duty fi berglass with embedded, easy-to-read boldface fi gures and graduations with red 16" stud marks and positive locking joints. No. 1602 is graduated on one side in millimeters with red markings every 10 cm. Reverse side reads in inches.

Width

in. mm

Weight

oz. g

No. 16022m, 78 3/4" Rule. Inside Flat Reading Scale in millimeters. Outside Scale in inches.

No. 1619Fiberglass 6' OutsideFlat Reading Rule

6-in-1 Screwdriver

Multi-Purpose 6-in 1 Screwdriver• Includes:

– #1 and #2 Phillips® tip.

– 3⁄16” and ¼” fl at tip.

– 5⁄16” and ¼” nut drivers in the shaft.

• Contoured cushioned grip for increased grip and torque.

• Ball/spring retention shaft with positive snap-fi t locking handle.

• Full RIDGID Lifetime Warranty.

CatalogNo.

16573 1974 6-in-1 Screwdriver 8" 203 1⁄4 .11 12

Weight

lb. kgModel

No.Length

in. mmDescription

Standard Pack


7.8

Pliers Pliers• Professional quality tools, precision crafted for ultimate balance, high strength and exacting performance.

• Forged and heat-treated for extended life and durability.

• Slip Joint and Tongue and Groove pliers feature a fl ush rivet design which provides a stronger tool and allows access to tighter areas.

• Cushioned grips are designed for comfort only. They are NOT intended as insulation against electric shock.

CatalogNo.

16493 763 Linesman Pliers 9" 228 3⁄4 .27 1 16458 767 Slip-Joint Pliers 8" 203 1⁄2 .23 1 16483 761 Wide-Jaw Pliers 7" 177 1⁄2 .23 1 16488 766 Long-Nose Pliers 8" 203 1⁄2 .23 1 62347 707 Tongue-and-Groove Pliers 71⁄2" 190 3⁄4 .34 1 62352 709 Tongue-and-Groove Pliers, 1 3⁄16 Capacity 91⁄2" 241 1 .45 1 16468 710 Wide-Mouth Tongue-and-Groove Pliers, 21⁄4 Capacity 101⁄2" 266 1 .45 1 16473 713 Tongue-and-Groove Pliers, 21⁄4 Capacity 13" 330 11⁄2 .88 1 62362 716 Tongue-and-Groove Pliers, 41⁄4 Capacity 16" 406 23⁄4 1.24 1

Weight

lb. kgModel

No.Length

in. mmDescription

Standard Pack

Tongue and Groove Pliers Slip-Joint Pliers Wide-Jaw Pliers

Linesman Pliers Long-Nose Pliers


7.9

All RIDGID Snips feature forged, heat-treated blades for increased quality and performance.Metal Cutting Snips Excellent for cutting sheet metal, screening, wire, leather, cloth, gasket material, rubber, linoleum, roofi ng material, plastics, etc. Handles designed for right- or left-hand use.

Light Metal Cutting Shear Cuts wire, sheet metal, rope, yarn, etc. Vinyl-coated handles. Manufactured from high-carbon, hot drop-forged tool steel.

Aviation Snips and Offset Snips Ideal for cutting 18-gauge or lighter cold-rolled sheet steel. Compound action results in maximum jaw power with minimum effort. Aviation snips threaded jaw bolt allows the blades to be realigned after prolonged use.

No. 780, 781 and 782 Straight Snips

No. 783, 784 and 785 Duckbill Snips (Circular)

No. 789 Light Metal Cutting Shear

No. 796 Offset Snips (cuts right)

No. 797 Offset Snips (cuts left)

No. 786 Aviation Snips (cuts right)

No. 788 Aviation Snips (cuts straight)

No. 787 Aviation Snips (cuts left)

Snips

Weight

lb. kg

54085 780 Straight Snip 7 177 2 51 3⁄4 0.34 654090 781 Straight Snip 10 254 21⁄2 64 1 0.5 654095 782 Straight Snip 121⁄2 318 3 76 13⁄4 0.8 654100 783 Duckbill Snip 7 178 13⁄4 44 5⁄8 0.3 654105 784 Duckbill Snip 10 254 21⁄2 64 1 0.5 654110 785 Duckbill Snip 121⁄2 318 3 76 13⁄4 0.8 654115 786 Snip - Cuts Right 101⁄2 267 13⁄8 35 1 0.5 654120 787 Snip - Cuts Left 101⁄2 267 13⁄8 35 1 0.5 654125 788 Snip - Cuts Straight 101⁄2 267 11⁄2 38 1 0.5 654130 789 Light Metal Shear 61⁄2 165 11⁄4 32 1⁄4 0.1 616202 796 Offset Snip - Cuts Right 101⁄2 267 11⁄2 38 1 0.5 616207 797 Offset Snip - Cuts Left 101⁄2 267 11⁄2 38 1 0.5 6

Cut

in. mmLength

in. mmStandard

PackDescriptionModelNo.

CatalogNo.


7.10

Knockout Sets RIDGID’s unique 3-point design makes punching fast and simple. Blanks fall out easily without prying. Choose from ball bearing manual sets to 2" or hydraulic sets to 4" with foot or hand pumps. RIDGID punches and dies are available individually or in sets, and are interchangeable with most knockout systems.

Manual KitsHardened alloy steel drive screws equipped with H-D ball bearings provide ease of operation and long life. Double end ratchet wrench included in Model R739BB provides speed and convenience.

• Precision-ground 3-point punch/die sets. – Capacity to 2" in 10-gauge mild steel.

• H-D ball bearing drive screws.

• Sets include durable ABS storage case.

• 3 kits available, including deluxe ratchet drive.

Hydraulic KitsCombines ease of hydraulic operation and precision-ground knockouts to provide clean, quick holes. Available with foot or hand pumps.

• Precision-ground 3-point punch/die sets. – Capacity to 4" in 10-gauge mild or 16-gauge stainless steel.

• Powerful 11-ton hydraulic ram.

• Pumps equipped with internal safety relief valve.

• Ram and pump equipped with quick disconnect couplers.

R739BB

HKO-186

Catalog Model Weight No. No. lb. kg

31787 R735BB 1⁄2"-11⁄4" Ball Bearing Kit w/Case 61⁄4 2.8 31792 R737BB 11⁄2"-2" Ball Bearing Kit w/Case 71⁄2 3.3 31797 R739BB 1⁄2"-2" Ball Bearing Kit w/Ratchet Wrench & Case 11 5.0 23477 HKO-186 1⁄2"-2" Hydraulic Kit w/Hand Pump (Includes 2 Draw Bolts, Draw Bar, Spacers, 3' Hose) 313⁄4 14.3 24587 HKO-1810 1⁄2"-4" Hydraulic Kit w/Hand Pump (Above w/KOPD 254 Kit) 611⁄4 27.7 Manual Knockout Accessories

31802 – 3⁄8" Ball Bearing Bolt 1 0.4 31807 – 3⁄4" Ball Bearing Bolt 13⁄4 0.7 31817 – 5⁄8" x 1" Ratchet Wrench 11⁄2 0.7

Hydraulic Knockout Accessories

24542 H-18 Hand Pump with Elbow 10 4.5 24547 HF-18 Foot Pump with Elbow 16 7.3 24537 8R111S Ram (Same Ram - All Sets) 61⁄4 2.8 24582 – Spacer Group (Inc. Long, Med., Short Spacer) 11⁄4 0.5 17602 – 3⁄8" Draw Bolt (F/Hyd Sets 1⁄2" P/D) 1⁄2 0.2 17597 – 3⁄4" Draw Bolt (F/Hyd Sets 3⁄4"-4" P/D) 21⁄4 1.0 21847 – 3' Hyd Hose (Hand Pump) 3 1.4 21857 – 10' Hyd Hose (Foot Pump) 7 3.2

Description


7.11

Knockout Sets

No. KOPD-52, 1/2"-2" Punch and Die Set with Case• Precision-ground 3-point punches.• Tool steel tough dies.• Sturdy case.

No. KOPD-254, 21/2"-4" Punch and Die Set with Case• Precision-ground 3-point punches.• Tool steel tough dies.• Sturdy case.

Catalog No. Description 23487 No. KOPD-52 Set with 1⁄2", 3⁄4", 1", 11⁄4", 11⁄2", 2" Punches and Dies and Case

Catalog No. Description

23492 No. KOPD-254 Set with 21⁄2", 3", 31⁄2", 4" Punches and Dies and Case

No. 1380 Cable CutterNo. 1380 Cable Cutter is designed to shear-cut insulated aluminum and copper cable through 13⁄8" diameter, and 750 MCM*. Drop-forged, heat-treated, alloy steel jaws shear cable with minimum distortion of internal wires. Fitted with fi berglass-insulated handles and rubber grips.

*Not intended for cutting steel or ACSR cable.

Weightlb. kg

83350 1380 Cable Cutter Aluminum and Copper 41⁄2 2.0 1 Cable through 13⁄8" Diameter and 750 MCM.

Std. Pack

CatalogNo. CapacityModel

No. Description

1⁄2 7⁄8 22.5 17497 1⁄2 0.2 17547 1 0.5 17602 31802 3⁄4 11⁄8 28.3 17502 1⁄2 0.2 17552 3⁄4 0.3 17597 31807 1 13⁄8 34.6 17507 3⁄4 0.3 17557 1 0.5 17597 31807 11⁄4 111⁄16 43.3 17512 11⁄4 0.6 17562 11⁄2 0.7 17597 31807 11⁄2 115⁄16 49.7 17517 21⁄4 1.0 17567 2 0.9 17597 31807 2 27⁄16 61.8 17522 4 1.8 17572 31⁄4 1.5 17597 31807 21⁄2 215⁄16 74.4 17527 31⁄4 1.5 17577 31⁄4 1.5 17597 – 3 39⁄16 90.6 17532 5 2.3 17582 51⁄4 2.4 17597 – 31⁄2 41⁄16 103.2 17537 31⁄4 1.5 17587 3 1.4 17597 – 4 49⁄16 116.0 17542 5 2.3 17592 41⁄4 1.9 17597 –

ConduitSize No.

Actual Hole Size

in. mmPunch Cat.

No.Die Catalog

No.Hydraulic Kit Draw Bolt No.

Manual Kit Draw Bolt No.

Punch Weight

lb. kg

Die Weight

lb. kg

Cable Cutter


7.12

Weight lb. kg

18363 S14 Head Assembly 7/8 1.0 18368 S18 Head Assembly 11/4 1.5 18373 S24 Head Assembly 21/4 2.7 18378 S30 Head Assembly 87/8 4.0 18383 S36 Head Assembly 131/2 6.1 18388 S42 Head Assembly 181/4 8.3

DescriptionCatalogNo.

Replacement Heads

• Hardened alloy steel jaws are designed and manufactured to assure the longest possible blade life.

• One-step internal cam mechanism provides the quickest and simplest way to keep the cutting blades precisely aligned.

• Handles and grips designed to allow greater mechanical advantage for crisp, controlled cutting.

Hard (42RC)3

in. mmSoft (15RC)1

in. mm

14213 S14 Center Cut 5/16 7.9 1/4 6.4 3/16 4.8 15 379 11/4 1.0 14218 S18 Center Cut 3/8 9.5 5/16 7.9 1/4 6.4 19 485 33/8 1.5 14223 S24 Center Cut 7/16 11.0 3/8 9.5 5/16 7.9 26 652 57/8 2.7 14228 S30 Center Cut 1/2 12.7 7/16 11.0 3/8 9.5 31 800 87/8 4.0 14233 S36 Center Cut 9/16 14.3 1/2 12.7 7/16 11.0 38 958 131/2 6.1 14238 S42 Center Cut 11/16 17.5 9/16 14.3 1/2 12.7 44 1,115 181/4 8.3

CatalogNo.

ModelNo.

Bolt CutterDescription

Capacity/Metals Weight

lb. kg

LengthOverall

in. mmMedium (31RC)2

in. mm

1Soft steel and nonferrous metals, bolts, screws, rivets, wire.2Iron and steel.3Stainless steel, spring wire, heat-treated rod, reinforcing rod.

Ordering Information

Cable Trimmer

No. 87 ACSRCable Trimmer

54440 E-5761 2/0 6/1 54445 E-5762 3/0 6/1 54450 E-5763 4/0 6/1 54465 E-5766 266,800 26/7 54480 E-5769 336,400 26/7 54500 E-5773 397,500 26/7 54520 E-5777 477,000 26/7 54540 E-5781 556,500 26/7 54575 E-5788 636,000 54/7 24/7

No. of StrandsA.W.G. or C. M.Bushing No.CatalogNo.

RIDGID No. 87 ACSR Cable Trimmer for fast, accurate cable splicepreparation.

• Trims 85 sizes of ACSR cable from 8 AWG to 1,780,000 circular mils (C.M.).• Bushings for 9 popular cable sizes from 1/0 AWG through 1,780,000 C.M. available from stock.• The operation of the tool is similar to that of a conventional tubing cutter.• The bushing holder, cutter and handy carrying case are sold as one unit.• Case contains storage sockets for 11 bushings. Twelfth bushing is stored in holder.

CatalogNo.

54135 87 ACSR Cable Trimmer, includes Bushing 91⁄2 4.3 Holder, Cutter, and Carrying Case

54270 E-4695 Cutter Wheel 1 .02

Weight lb. kg

ModelNo.

Description

No. 87 ACSRCable Trimmer Kit

Bolt Cutter


7.13

Shovels

No. 174No. 173No. 172

No. 176

Blade Size

in. mm

52300 170 Long Handle, Round Point 47 1194 85/8 x 111/2 219 x 292 34/5 1.7 6 52345 19150482 170FG Fiberglass Round Point 48 1200 85/8 x 111/2 219 x 292 4.7 2.1 6 – –52305 171 Long Handle, Square Point 47 1194 93/4 x 12 248 x 305 41/2 2.0 6 52345 19150487 171FG Fiberglass Square Point 48 1200 93/4 x 12 248 x 305 5 2.3 6 – –52310 172 D Handle, Round Point 27 686 85/8 x 111/2 219 x 292 4 1.8 6 – –52315 173 D Handle, Square Point 27 686 93/4 x 12 248 x 305 41/2 2.0 6 – –52320 174 D Handle, Drain Spade 27 686 51/2 x 16 140 x 356 34/5 1.7 6 – –88680 176 D Handle, Steel Scoop 27 686 93/4 x 16 248 x 406 51/2 2.5 6 – –50492 177 Trench Shovel 47 1194 51/2 x 12 140 x 305 3.1 1.4 6 52345 191

CatalogNo.

ModelNo.

Standard Pack

Handle Length

in. mmDescription

CatalogNo.

ModelNo.

ReplacementHandle (6 per pack)Weight

lb. kg

No. 170/No. 170FG

No. 177

Shovel blades and shanks are one-piece, rust-proofed, 14-gauge steel, taper-formed and then heat treated. Round blades have a slip-resistant, turned step. Burnished, lacquered ash handles are double-riveted to blade socket. 170 and 171 designs are offered with fi berglass handles for greater strength and longer life.

No. 171/No. 171FG


7.14

Screw Extractors (With Sliding Turnut)

35575 3 Includes Nos. 3,4 and 5 8 227 135580 5 Includes Nos. 1,2,3,4 and 5 8 227 135690 5 Holder Only 1 28 1

CatalogNo.

ModelNo.

Std.Pack

Weightoz. g

Screw Extractors (In Sets)

35590 25 Screw and Pipe Screw 1/4-1 6-25 91/4 4.2 1 Extractor Set Pipe 1/8-1 3-2535700 25 Box Only – – – 1 .5 1

CapacityType in. mm

Weightlb. kg

CatalogNo.

ModelNo.


No. 25 Screw and Pipe Extractor Set No. 25 set contains one each of screw extractors Nos. 1 to 8 inclusive (Nos. 1 to 5 Extractors with turnuts); Drill Nos. 1 to 8 inclusive, and one No. 36; and complete set of drill guides and bushings. Maximum depth extractor range 1" to 3". Pipe extractors Nos. 80 to 85 also included. These precision tools are packed in a fi tted compartment box.

No. 10 Screw Extractor Set No. 10 set contains 20 precision tools – one each of Extractor Nos. 1 to 5 inclusive with turnuts, drill Nos. 1 to 5 inclusive, and drill guides Nos. 921 to 1821 inclusive. Pre-formed plastic box provides convenient storage.

MaximumDepth

in. mm

LengthOverall

in. mm

FluteDiameter

in. mm

35535 1 1/4 6 1/8 3 0.139 3.5 25/16 59 1 25 1/2 14 635540 2 5/16 8 3/16 5 0.205 5.2 23/4 70 1 25 1 28 635545 3 3/8 9,5 1/4 6 0.272 6.9 31/16 78 1 25 11/4 35 635550 4 7/16 11 5/16 8 0.338 8.6 35/16 84 1 25 13/4 50 635555 5 1/2-9/16 13-14 11/32 9 0.374 9.5 33/4 95 1 25 21/4 64 6 (No Turnut)35560 6 5/8 16 7/16 11 0.471 12.0 41/8 105 2 51 3 85 635565 7 3/4 19 1/2 13 0.538 13.7 41/2 114 2 51 4 113 635570 8 7/8-1 22-25 5/8 16 0.665 16.9 43/4 121 3 76 61/2 184 6

Std.Pack

CatalogNo.

ModelNo.

Weightoz. g

UseDrill

in. mm

ScrewDiameterin. mm

Capacityin. mm

35585 10 Screw Extractor Set 1/4-1/2 6-13 11/4 0.6 135695 10 Box Only 1/4-1/2 6-13 11/4 0.6 1

Weightlb. kg

CatalogNo.

ModelNo. Description Std.

Pack

Screw Extractors

FIRST – Drill a small hole clear through the broken end using a snug fi tting RIDGID Drill Guide for precision centering. This centering hole is for the larger drill to follow.

SECOND – Remove Drill Guide. Drill out the small center hole to larger diameter for receiving the “longrip” Extractor.

THIRD – Drive the “longrip” Extractor into the thin hollow shell and turn it out.

Description


7.15

Diameter

in. mm

35720 1 1/8 3 21/2 63 1/4 7 135725 2 3/16 5 3 73 1/2 14 135730 3 1/4 6 31/2 89 3/4 21 135735 4 5/16 8 4 102 11/4 35 135740 5 11/32 9 41/2 114 11/2 43 135745 6 7/16 11 43/4 121 21/2 71 135750 7 1/2 13 5 127 31/2 99 135755 8 5/8 16 51/2 139 51/2 156 135760 36 1/4 6 6 152 11/2 43 1

Weight

oz. g

CatalogNo.

ModelNo.

Std.Pack

LengthOverall

in. mm

High-Speed Twist Drills

35765 921 9/32 7.1 13/16 30 1/8 3 1/4 7 135770 1021 5/16 7.9 13/16 30 1/8 3 1/2 14 135775 1121 11/32 8.7 13/16 30 1/8 3 1/2 14 135780 1221 3/8 9.5 13/16 30 1/8 3 1/2 14 135785 1321 13/32 10.0 13/16 30 3/16 5 1/2 14 135790 1421 7/16 11.1 13/16 30 3/16 5 3/4 21 135795 1521 15/32 11.9 13/16 30 3/16 5 3/4 21 135800 1621 1/2 12.7 13/16 30 3/16 5 1 28 135805 1721 17/32 13.5 13/16 30 1/4 6 1 28 135810 1821 9/16 14.3 13/16 30 1/4 6 1 28 1

Weightoz. g

CatalogNo.

ModelNo.

Std.Pack

UseDrill

in. mm

DiameterO.D.

in. mm

OverallLength

in. mm

Replacement Drill Guides(One-Piece Type)

Replacement Drill Guides / Twist Drills


7.16

Model 85E:Cu/Coax Front Crimp

Model 86E:Cu/Coax Rear Crimp

Model 80E:Coax Cable Tool

Model 90E: Romex

Model 96E: Dual Romex

Model 81E:5/8" Capacity

Model 88E: 3-PC Mini Tools for Tight Spaces

Premium Features• Return spring action speeds up work.

• Positive lock to protect cutting and stripping edges when stored.

• Steel wire shear and bolt cutting stations for extra versatility.

• Holes included for quick wire looping.

• Serrated pliers nose for working small nuts and pulling wire.

Electrical Tools• Complete Lineup Of Heavy-Duty Cutting, Stripping, & Crimping Tools For Electrical and Other Applications.

• Innovative RIDG-BACK™ Technology Reduces Cutting Force Up To 50%.

• All Tools Come With Deluxe Cushion Grips That Include Clear Application Markings.

• All Tools Include A Black Oxide Finish To Resist Rust and Corrosion.

Model 83E:10-18/12-20 AWG

Model 84E:20-30/22-32 AWG

The RIDG-BACK™ Advantage!A Staggered Design Means The Blade, Not You, Provides More Cutting Force – Required Hand Force Is Reduced Up To 50%.


7.17

Fiber Optic Stripper• Strips 900µm and 250µm buffer coating from 125µm optical fi ber.

• Precision stripping station to remove 3.0mm fi ber jacket.

• Return spring to speed work.

• Lock protects blade when stored.

CatalogNo.

21428 89E Fiber Optic Stripper: 900µm/250µm 1/2 0.2 6 Buffer coating, 3.0mm fi ber jacket

Weight lb. kg

ModelNo. Description

Std.Pack

Model 89E:Fiber Optic Stripper

Cutting Blade/Stations

Main Cutting Blade Accessory Cutting Stations Additional Features

Catalog No.

Model No. Description/Materials Used For:

RIDG-BACK Blade

Curved or Notch

Blade

Steel Wire Shear

Nose Anvil Cutter

Bolt Cutting Stations

Return Spring

Protective Lock

Wire Looping

Holes

Nose Pliers

Weight Std. Packlb. kg

21393 83E Cutter/Stripper: 10-18 AWG Solid, 12-20 AWG Stranded Copper ✓ ✓ 6-32, 8-32 ✓ ✓ ✓ ✓ 1⁄2 0.2 6

21398 84E Cutter/Stripper: 20-30 AWG Solid, 22-32 AWG Stranded Copper ✓ ✓ 6-32, 8-32 ✓ ✓ ✓ ✓ 1⁄2 0.2 6

21433 90E Cutter/Stripper: 10-2 Romex NM-B, 10 AWG Solid Copper ✓ ✓ 6-32, 8-32 ✓ ✓ ✓ ✓ 1⁄2 0.2 6

21438 96E Cutter/Stripper: 12-2/14-2 Dual Romex NM-B, 12-14 AWG Solid Copper ✓ ✓ 6-32, 8-32 ✓ ✓ ✓ ✓ 1⁄2 0.2 6

21423 81E4-In-1 Multi-Purpose Cutter:

5/8” Capacity, Electrical Copper Wire and Cable And Multi-Conductor Wire

Curved For Copper ✓ ✓ 6-32, 8-32 ✓ ✓ ✓ 1⁄2 0.2 6

21428 89E Fiber Optic Stripper: 900 µm / 250µm Buffer Coating, 3.0mm Fiber Jacket ✓ ✓ 1⁄2 0.2 6

Cutting / Stripping / Crimping Combo Tools:

21408 85E 10-22 AWG Copper, Coax w/Up-Front Crimping ✓ ✓ ✓

4-40, 6-32, 8-32, 10-32, 10-24 ✓ 1⁄2 0.2 6

21403 86E 10-22 AWG Copper, Coax w/Rear-Pivot Crimping ✓ ✓

4-40, 5-40, 6-32, 8-32,

10-32, 10-24✓ ✓ ✓ ✓ 1⁄2 0.2 6

21418 80E Coax Cable Tool For RG-6, RG-6 Quad, RG-59

Notched Blade

1⁄2 0.2 6

21413 88E3-Pc. Mini Cutter, Stripper, Crimper For

Tight Spaces: 8-18 AWG Solid, 10-22 AWG Stranded Copper

✓ 1⁄2 0.2 6

Other RIDGID Electrical Contractor Tools:

Thinwall Conduit Benders –Page 8.4

Pliers – Page 7.8Hole Saws – Page 6.41224 Threading Machine – Page 4.28


7.18

Thermometer MicroRay IR-100 Non-Contact Infrared Thermometer• Great energy audit and troubleshooting tool for a variety of applications:

– Plant and building maintenance.

– HVAC and refrigeration.

– Electrical.

– Plumbing.

– Automotive.

• Simple, “1-Click” temperature measurement capability with Ultra-Sharp Class II laser sighting.

• The MicroRay IR-100 offers several RIDGID advantages:

– 15 to 1 distance to spot ratio.

– “Smart” temperature readings: accurately measure temperature of different surfaces (e.g. copper, aluminum, iron, plastic, etc.) regardless of their emissivity properties – no need to apply tape or paint to object to ensure proper measurement.

– “Smart” settings: High and low alarms; maximum, minimum and differential temperature readings.

• Other key specifi cations:

– Temperature Range: -30° to +500° C, -22° to 932° F.

– Large Backlight LCD display.

– Tripod mounting capability.

– Operates on 9V battery (included).

23578 IR-100 Non-Contact Infrared Thermometer 1⁄2 0.2 1

Weight lb. kg

CatalogNo.

ModelNo.



Date post:	12-Mar-2016
Category:	Documents
Upload:	canyon-fleet-outfitters
View:	216 times
Download:	1 times

RidgidHandTools

Documents