FOR MORE INFO – Call 432-563-2005, View Online at www.kruseenergy.com or Call Larry Mitchell (903-237-8916) or George Rich (409-790-9315) Jim Richie - TX Lic# 13742 • James Dyess - TX Lic# 8550 • A 2.5% admin fee will be charged on all onsite purchases Rig #161 CAT SR-4 210KW Gen House – YD2 Rig #151 G.DENVER PZ-8 – YD1 Rig #169 AMERI-TECH Crew Quarters – YD1 WEDNESDAY, AUGUST 6th, 2014 • 9:00 A.M. (CDT) TYLER , TEXAS @ Holiday Inn - South Broadway - Visit Kruse Website for Special Room Rate Rig #151 MID-CONT. U-36A – YD1 Rig #88 IDECO H-725 – YD9 Rig #169 C.EMSCO D-2 Drawworks – YD1 2,594 Hours Like NEW! HYUNDAI Gen / MTU12V - YD6 Rig #169 C.EMSCO F-800 w/3508 Eng – YD1 Rig #54 NATIONAL 110-M 1500 HP – YD6 Rig #54 142'H 780,000# SHL Mast – YD6 UNUSED Since Refurbished 5% Total Internet Bidding Fee (9) DRILLING RIGS • (10) 130-BBL VACUUM TRAILERS DRILL PIPE • DRILLING & WELL SERVICE COMPONENTS
Transcript
FOR MORE INFO – Call 432-563-2005, View Online at www.kruseenergy.comor Call Larry Mitchell (903-237-8916) or George Rich (409-790-9315)
Jim Richie - TX Lic# 13742 • James Dyess - TX Lic# 8550 • A 2.5% admin fee will be charged on all onsite purchases
Rig #161 CAT SR-4 210KW Gen House – YD2
Rig #151 G.DENVER PZ-8 – YD1
Rig #169 AMERI-TECH Crew Quarters – YD1
WEDNESDAY, AUGUST 6th, 2014 • 9:00 A.M. (CDT)TYLER, TEXAS@ Holiday Inn - South Broadway - Visit Kruse Website for Special Room Rate
Rig #151 MID-CONT. U-36A – YD1
Rig #88 IDECO H-725 – YD9
Rig #169 C.EMSCO D-2 Drawworks – YD1
2,594 Hours
Like NEW!
HYUNDAI Gen / MTU12V - YD6 Rig #169 C.EMSCO F-800 w/3508 Eng – YD1
Rig #54 NATIONAL 110-M 1500 HP – YD6
Rig #54 142'H 780,000# SHL Mast – YD6
UNUSED SinceRefurbished 5% Total Internet Bidding Fee
(9) DRILLING RIGS • (10) 130-BBL VACUUM TRAILERSDRILL PIPE • DRILLING & WELL SERVICE COMPONENTS
Rig #151 Top Doghouse – YD1(1 of 5) Gen Houses – YD3Rig #151 12'W x 48'L Crew House – YD1
DIRECTIONS: 2500 West 87th St, Odessa, TX 79764. From the intersectionof I-20 (Exit #121) & 338 Loop in Odessa, go north on 338 Loop for 2.3 miles,turn left on Hwy 191/42nd St. and go 4.9 miles and turn right onto N. CountyRoad West and travel 3.3 miles North, then turn left on Hillmont Rd and travelfor .5 miles, then turn left on Beeson Ave. (look for Price Petroleum sign onright) and travel .3 miles then veer left and turn right into yard (Patterson Yard).PREVIEW beginning, July 30, 2014 8am-5pm, Monday-Friday. CHECKOUTthru August 17, 2014, 8am-5pm, Monday-Friday. CONTACT: Mike Loya @ 432-664-5527.
(NOTE: All Yard #1 Engines Were Pickled W/VCI Anti-Corrosive Fluid WhenRigs Were Stacked, With The Exception Of Rig #169 Drawworks Engines.)
MID-CONT. U-36A S/D Drawworks, PARMAC V-80 Brake p/b (2) CAT 3406AEngs w/TWIN DISC 11524-TC Torques • TRI-STATE 131’ H Mast (Note: 2010SUPERIOR CAT III INSPECTION) & TRI-STATE 10’H Substructure w/MAXI-RIDER Personnel Lift 5’H Pony Subs • (2) CAT SR4B 320 KW Gens,Ea p/b CAT C-15 Eng, SULLIVAN Palatek 30DG Screw Type Air Compressor •(2) G.DENVER PZ-8 Triplex Pumps, Ea p/b Cat 379 Eng • OIME 27-1/2” Ro-tary Table • Toolpusher’s House • Crew Quarters • Dog House • Parts House •Change House • Water Tank/Parts House Combo • Misc. Handling Tools
CONT.EMSCO D-2 S/D Drawworks, PARMAC 342 Brake p/b (2) CAT 379Engs w/TWIN DISC 11524-TC Torques, (2) Air Compressors • DSI 131’H Mast,DSI 12’H x 45’L Substructure, MAXI-RIDER Personnel Lift • (2) CAT SR4B 320KW Gens, Ea p/b CAT 3406 Eng, SULLIVAN Palatek 30DG Screw-Type AirCompressor • (2) CONT.EMSCO F-800 Triplex Pumps, Ea p/b CAT 3508 Engw/NATIONAL C-300-64 Torques • SKYTOP-BREWSTER 250-Ton Block/HookCombo • G. DENVER RT22.5 22-1/2” Rotary Table • AMERI-TECH CrewQuarters • 2-Tank Mud System w/Crimped Wall Tanks • Water Tank • Dog-house • Parts & Lube House Combo • Air Hoist & Misc Handling Tools
BDW 450 S/D Drawworks, PARMAC 341 Brake p/b (2) CAT 3406 Engs w/NA-TIONAL C-195-64 Torques, (2) Air Compressors • SUPERIOR 110’H320,000#SHL Mast, 12’H x 40’L Substructure • (2) LEROY SOMER 350 KWGens, Ea p/b CAT C-15 Eng, SULLIVAN Palatek 30D7 Screw-Type Air Com-
pressors, QUINCY 5120 Air Compressor • McKISSICK 868 250-TonBlock/Hook Combo • NATIONAL 17-1/2” Rotary Table • 5000# Choke Manifold• 3-Tank Mud System w/Crimped Wall Tanks • (2) Water Tanks • 12’W x 48’LCrew Quarters • Doghouse • Change/Parts House Combo • (3) I.RAND AirHoists & Misc Handling Tools
NATIONAL 610 S/D Drawworks, McKINNEY 281 Brake p/b (2) CAT C-15 Engs• SUPERIOR 131’H 428,000#SHL Mast & 12’H Substructure • (2) CAT SR4210 KW Gens, Ea p/b CAT 3406 Eng, SULLIVAN Palatek 30DG Screw-TypeAir Compressors • (2) IDECO MM700 Duplex Pumps, Ea p/b CAT 379 Eng •PYRAMID 350-Ton Block/Hook Combo • IDECO 27-1/2” Rotary Table • CrewQuarters • Toolpusher’s House • Doghouse • Water Tanks
DIRECTIONS: 4105 South Chadbourne St, San Angelo, TX 76903. From inter-section of Hwy 67 & Hwy 277/87 in San Angelo, TX, Go South on Hwy 277/87for 1.5 miles to FM 388/W. Ave L. Turn left (travel East) on FM 388/W. Ave L totravel .4 mile to S. Chadbourne St, Turn right (South) and travel 2 miles to Pat-terson-UTI yard on the right. PREVIEW beginning, July 30, 3014, 8 am-5 pm,including weekends. CHECKOUT thru August 17, 2014, 8 am-5 pm, includingweekends. CONTACT: Benny Hughes @ 432-413-8840.
(NOTE: All Yard #2 Engines Were Pickled W/VCI Anti-Corrosive Fluid When Rigs Were Stacked)
G.DENVER 500 S/D Drawworks, PARMAC 341 Brake p/b (2) CAT 3406 Engsw/NATIONAL C-195-164 Torques, Air Compressor • SUPERIOR 110’H320,000# SHL Mast, 12’H x 42’L Substructure • MAXI-RIDER Personnel Lift •(2) CAT SR4 210 KW Gens, Ea p/b CAT 3406 Eng, SULLIVAN Palatek 30DGScrew-Type Air Compressor • (2) CONT.EMSCO F-800 Triplex Pumps, Ea p/bCAT 3408 Eng w/NATIONAL C-300-64 Torques • CONT.EMSCO RA36 250-Ton Block/Hook Combo • G.DENVER RT22.5 22-1/2” Rotary Table • 2-TankMud System w/Crimped Wall Tanks • (2) Water Tanks • Doghouse • PartsHouse • I.RAND 4000# & (2) 2500# Air Hoists • Pipe Spinner • Kelly Spinner •Misc Handling Tools
DIRECTIONS: From Shreveport, LA go east on I-20 to exit 33. At the stop sign(LA157) turn right & go one block to traffic light. Turn left on Hwy LA3227. Go
2.0 miles to stop sign. Turn right on LA164 & go 0.9 miles. Turn right onLA614 (Stallion Yard on east side of 164) & go 0.8 miles to entrance on left.Turn and cross RR tracks into Blazer Construction Rock yard. PREVIEW be-ginning July 30, 2014, 8am-5pm, including weekends. CHECKOUT thru Au-gust 17, 2014, 8am-5pm, including weekends. CONTACT: Charlie Washburn@ 903-985-0429.
(NOTE: All Yard #3 Engines Were Pickled W/VCI Anti-Corrosive Fluid When Rigs Were Stacked)
IDECO H725 S/D Drawworks, PARMAC V-80 Brake p/b (2) CAT C15 Engs, OIL-WORKS 195-100 Torques (NOTE: This Drwwks Package was Completely Re-furbished & Never Used. This is Rig #88 Drwwks, but is located in Tyler, TXYard #9, See Directions) • SUPERIOR 136’H 425,000# SHL Mast, DSI 16’HSubstructure • (2) CAT SR4 210 KW Gens, Ea p/b CAT 3306 Eng • (2) OILWELLA-850PT Triplex Pumps, Ea p/b CAT 3508 Eng w/NAT’L C-300-64 Torque •McKISSICK 868 250-Ton Block/Hook Combo • NATIONAL 17-1/2” Rotary Table •KOOMEY 5-Station Closing Unit • 2-Tank Mud System w/Crimped Wall Tanks •Doghouse • Fuel Tank • Water Pump System (Duck Pond) • (3) I.RAND Air Hoists
NATIONAL 610 S/D Drwwk w/PARMAC 281 Brake • (2) OILWELL A-1100 TriplexPumps • IDECO UTB-260 Block/Hook • OILWELL 360-Ton Block/BJ 5350 Hook •(5) Utility Houses Ea w/(2) CAT SR-4 / 3406 Gen Sets • I.RAND HUL40 Air Hoist •(4) INT'L Kelly Spinners • (2) OILWORKS & (2) MATHEYWireline Units •WEATHERFORD Pipe Spinner • (2) PARMAC 342 Brakes
DIRECTIONS: 13331 Hwy 71, Gilliam, LA 71029. North of Shreveport, LA,travel N. Loop 220 to exit 7B, Hwy 71, 1, I-49N. Travel Hwy 1/I-49N for 4.1miles to the intersection of I-49N. Exit to I-49N & go approx 20 miles to the in-tersection of Hwy 71 Exit 23A & go south on Hwy 71 for 1.6 miles to HobbsWelding on the left. PREVIEW beginning, July 30, 2014, 8am-5pm, includingweekends. CHECKOUT thru August 17, 2014, 8am-5pm, including weekends.CONTACT: TJ Washburn @ 903-985-0131.
(NOTE: All Yard #4 Engines Were Pickled W/VCI Anti-Corrosive FluidWhen Rigs Were Stacked)
YARD #1 - ODESSA, TX
RIG #151
RIG #169
RIG #107
RIG #466
YARD #2 - SAN ANGELO, TX
RIG #161
YARD #3 - HAUGHTON, LA
RIG #88
YARD #4 - GILLIAM, LA (HOBBS WELDING)
DRILLING COMPONENTS
2
Rig #151 CAT SR4B 320KW Gen House – YD1Rig #107 BDW 450 – YD1 Rig #466 NATIONAL 610 – YD1
(1 of 2) 200-Bbl Water Tanks – YD6 NATIONAL 110 D/D – YD6
IDECO H725 S/D Drawworks, PARMAC V80 Brake, Driller’s Air Control Panel, 2-Eng In-Line Compound, w/o Power • DSI 136’H650,000# SHL Mast, 16’H Substructure • (2) CAT SR4B 310 KW Gens, Ea p/b CAT 3406 Eng • (2) G. DENVER PZ-9 TriplexPumps, Ea p/b CAT 398 Eng • IDECO 360 Traveling Block w/IDECO 360 Hook • IDECO 23E 23” Rotary Table • C. EMSCOLB300 300-Ton Swivel • HYDRIL GK 11” 5M Annular BOP • SHAFFER 11” 5M Dbl BOP • 5-Station Closing Unit • 5000# ChokeManifold • 2-Tank Mud System w/Crimped Wall Tanks • Water Tank • Fuel Tank • Toolpusher’s House • Top Doghouse
DIRECTIONS: 3146 FM 2276 N, Henderson, TX, 75652. From the North side of Henderson, TX at the intersection ofHwy 259 & Hwy 64 go North on 259 for 4 miles to FM 2276, turn left & follow FM 2276 until you cross the railroad tracks.The first gate on the left. The sign says Odessa Pumps. PREVIEW beginning, August 1, 2014, 8am-5pm, including week-ends. CHECKOUT thru August 17, 2014, 8am-5pm, including weekends. CONTACT: Dick Turner @ 903-721-0283.
(2) CAT 375KW Gens p/b CAT 3408 Engs • HYDRIL 11” 5000# Sgl Ram BOP (UNUSED) • SHAFFER MNL 7”Dbl BOP • (2) TOWNSEND 7-1/16” 5000# Sgl BOPs • EMSCO 17-1/2” Rotary Table • (2) BREWSTER 22-1/2”Rotary Tables • (2) BAASH-ROSS 5-1/4” Hex Kelly Bushings • (2) Crimped Wall Mud Tanks Ea w/(2) Compart-ments • Water Tanks • DETROIT 3-71 Eng w/PTO • WORTHINGTONWater Pump w/DETROIT 4-71 Eng •G.DENVERWater Pump p/b WAUKESHA 310 Eng • G.DENVER ADL Air Compressor • 4 Wireline Units • (6) 8-5/8” Wellheads • (3) PTO Winches • (11) Centrifugal Pumps • IDECO T-1000 Fluid Module (NEW) • (22) VariousRight Angle Drives • (4) DETROIT Series 60 Engine Cores • 200-Bbl Fiberglass Tank, On S/A Trailer • ALLISONCLT-750 Trans • PARMAC 122 Brake • (3) G.DENVER PA-8 Gear End Cases
DIRECTIONS: 21207 Hwy 8 West, Jena, LA 71342. From Alexandria, LA go North on Hwy 165, turn right on Hwy8, go 20.8 miles to Justiss Oil Co. on right. PREVIEW beginning July, 30, 2014, 7am-3:30pm, Mon-Fri. CHECK-OUT thru August 17, 2014, 7am-3:30pm, Monday-Friday. CONTACT: Ronnie Lowe @ 318-312-0622.
NATIONAL 110-M S/D Drawworks, PARKERSBURG 48” Brake, C. EMSCO CT-5 2-Eng In-Line Compound w/C.EMSCO Torques, Air Clutches w/(2) G. DENVER Air Compressor, Mtd on (3) Skids (No Power) • CUSTOM RIGWORK 142’H 780,000# SHL Mast & 21’H Substructure w/10’H Pony Sub • NATIONAL P500 Swivel w/INTERNA-TIONAL K-6 Kelly Spinner • G. DENVER 400-Ton Block w/BJ Dynaflex 500-Ton Hook • Doghouse • (2) Suitcases
Date & Time:Wednesday, August 6th, 2014 @ 9:00AMAuction Location & Crew Headquarters:Holiday Inn South Broadway • 903-561-5800 (Tel) • 903-561-9916 (Fax)5701 S. Broadway • Tyler, TX 75703 • Visit Kruse Website for Special Room RateAlternate Hotels:Comfort Suites • 903-534-0999 • 303 Rieck Rd • Tyler, TXSleep Inn & Suites • 903-581-8646 • 5555 Donnybrook Ave • Tyler, TXAirport: Tyler Pounds Field International Airport (4 Miles West of Loop 323 onHwy 64) • Served by American Airlines & United Airlines
All bidders must register and provide proper identification. All purchases must bePAID IN FULL on sale date before equipment will be released. Acceptable formsof payment include Cash, Cashier’s Check, Travelers Checks, Wire Transfer orPersonal/Company Check Accompanied by BANK LETTER OF GUARANTEE. Nodrafts will be accepted. All printed information regarding this sale is merely a guide,subject to change, and neither the auction Company, Sellers, nor Publishers shallbe liable for any errors in this brochure. All items will be sold “AS IS, WHERE IS,WITH ALL FAULTS” and without guarantee or warranty of any kind, either ex-pressed or implied. A 2.5% Admin Fee will be charged on all onsite purchases.A 5% Total Internet Bidding Fee will be charged on all Internet purchases.
Purchasers who are tax exempt MUST provide a copy of their SALES and USETAX PERMIT at the time of BIDDER REGISTRATION. The company FederalIdentification Number, or for a proprietorship, the purchaser’s social security num-ber will also be required at registration.
TERMS OF SALE
TAX NOTICE
BRING A COPY OF YOUR SALES TAX PERMIT!For Private Sales or Appraisals
Contact Us or Kruse Asset Management at 800-952-1973ABSENTEE BIDS
Absentee Bids Only Allowed with 50% DEPOSIT OF MAXIMUM BID and WRITTEN INSTRUCTIONS to Odessa Office 24 HOURS PRIOR TO AUCTION, NO EXCEPTIONS.
Foreign Buyer Notice: You must be pre approved 48 hours before auction to register to bid. For further information contact [email protected]
Nice!
8177 S. Harvard, #FFTulsa, OK 74137
James B. RichieChief Auctioneer
TX Lic# 13742, OK Lic# 0330149
JAMES B. RICHIE, AUCTIONEERJAMES DYESS, AUCTIONEER
NATIONAL OILWELL IDS 350P 350-Ton Top Drive w/CAT 3512 Gen,NOV Hyd Power Unit • HYUNDAI HFC7632-64E 1833 KVA 600 Volt Genp/b DETROIT MTU 12VDDC Eng, Premium Gauge Panel, Covered Skid(Note: 2594 Hours Since NEW – Very Nice!) • NATIONAL 110 D/D Dr-wwks • Gen House w/G. DENVER ADL Air Compressor, Volume Tank •5-Compartment Mud Tank, 350-Bbl Capacity • 11,594’ (374 Jts) 5”, S-135 Drill Pipe • 1829’ (56 Jts) 5”, S-135 Drill Pipe • TOWNSEND TM-20-6 7-1/16” 3000# Dbl Manual BOP (REBUILT & No Rams) • (1)INGERSOLL-RAND 2500# Air Hoist (REBUILT Like NEW), (2) THERNTA 2500# Air Hoists • (2) Open Top 202-Bbl Water Tanks • FOLEY TypeTongs w/Heads • BJ Type C Tongs w/Heads • Drill Pipe Slips • NATIONAL 110Low Drums & Brake Bands (Appear UNUSED) • Asst’d Centrifugal Pumps
DIRECTIONS: 6389 HWY 79 South, Palestine, TX 75801. From the intersec-tion of Hwy 79/84 and Loop 256 in Palestine, TX. Travel Southwest on Hwy 79for approx. 5 miles to yard on the left at Bullard St. PREVIEW beginning July28, 2014, 8am-4pm, Mon.-Fri. CHECKOUT thru August 17, 2014, 8am-4pm,Mon.-Fri. CONTACT: Jerry Don Kelly @ 903-724-9306.
RMI 750 Drawworks, PARMAC Brake p/b (2) CAT C-15 Engs • LEE C. MOORE131’H 400,000# SHL Mast & DSI 2-Piece Substructure w/Pony Subs • (2) G.DENVER PZ-9 Triplex Pumps, Ea p/b CAT 398 Eng • NATIONAL 9-P-100Triplex Pump p/b CAT 379B Eng • IDECO 160-Ton Block/Hook Combo •KOOMEY 5-Station Closing Unit • 5000# Choke Manifold • 2-Tank Mud Sys-tem • Water Tank • 4-Comp Lubester • Rig House • Doghouse • Parts House
DIRECTIONS: 805 Whiteside Lane, Kilgore, TX 75662. From I-20 & 259/31 S,follow Business 259 South through Kilgore to the intersection of 259 S & Wood-lawn St. (traffic light). Turn right (west) & go 1.0 mile to Whiteside Ln. (CalvaryWay Church sign on left). Turn left to yard on the right. PREVIEW beginningJuly 28, 2014, 8am-4pm, Mon.-Fri. CHECKOUT thru August 15, 2014, 8am-4pm, Mon.-Fri. CONTACT: Chuck Rheady @ 979-204-2212 or Matthew Le-Tourneau 903-220-9870.
Drives • BAASH-ROSS 5-1/4” Hex Kelly Drive • (2) VARCO 5-1/4” Sq KellyDrive • JOY 500-Ton Hook • PARKERSBURG 48” Brake w/Cradle & WaterTank • (3) 10,000# Chicksans, (2) Hyd Choke Manifolds • (6) Air Compressorsw/Elec Motors • (11) Pallets Changeover Subs • MATHEY GCSWireline Unit •(4) Deadline Anchors
DIRECTIONS: 11940 Constanine Ave., Tyler, TX 75708. From I-20 & Hwy 271,travel south on Hwy 271 for 5 miles to FM 3270 on the right (west). Turn right& go 0.4 miles to FM 344 or Constanine Ave. Turn right & go 0.6 miles to yardon Left. PREVIEW beginning, July 28, 2014, 8am-4pm, Mon.-Fri., no week-ends. CHECKOUT thru August 15, 2014, 8am-4pm, Mon.-Fri., no weekends.(PPE REQUIRED). CONTACT: Wes Maxwell @ 903-707-1134 or RussLemons @ 903-574-3329.
(NOTE: The Following Engines Were Running Take Outs When Rigs Were Stacked -SSS)
(2) CAT 3408 DITA Engs w/OILWORKS F11561-TCO Torque Converters • (2)CAT 3406 Engs Ea w/ALLISON 5860 Trans • (2) DETROIT 8V-71 Engs Eaw/Tu-Flo 1000 Compressors & ALLISON 5860 Trans
