Date post: | 19-Dec-2015 |
Category: |
Documents |
Upload: | octavia-norris |
View: | 288 times |
Download: | 19 times |
Rigging Rigging Equipment Equipment
Safety is Safety is the #1 the #1 prioritypriority
Rigging equipmentRigging equipment
• Inspect rigging equipment:Inspect rigging equipment: • Before each shiftBefore each shift • As necessary during useAs necessary during use
• Remove rigging equipment:Remove rigging equipment:• If defectiveIf defective • When not in useWhen not in use
2a
Safe working loadSafe working load
• Recommended safe loadRecommended safe load
• Mark custom lifting accessoriesMark custom lifting accessories
• Proof test to 125 percentProof test to 125 percent
2b
Competent person and Competent person and inspectioninspection • Inspect before each shiftInspect before each shift
• Additional Additional inspectionsinspections
• Remove from Remove from serviceservice
3a
Alloy steel chainsAlloy steel chains
• Attached ID information Attached ID information
• Rated capacity Rated capacity in Table H-1in Table H-1
• Chain link wear Chain link wear in Table H-2in Table H-2
4a
Inspect alloy steel chains Inspect alloy steel chains based onbased on • Frequency of sling useFrequency of sling use
• Severity of service conditionsSeverity of service conditions
• Nature of lifts madeNature of lifts made
• Experience from other Experience from other slingsslings
4b
Sling Inspection Sling Inspection
• Inspect slings every 12 monthsInspect slings every 12 months
• Maintain records of Maintain records of inspectionsinspections
4c
Wire ropeWire rope
• Safe working loadSafe working load
• Protruding ends Protruding ends of standsof stands
• Don’t use knotsDon’t use knots
• Visible brokenVisible broken wires wires
5a
Slings general requirementsSlings general requirements
• Don’t use knotsDon’t use knots
• Prevent kinkingPrevent kinking
• Balance loadsBalance loads
7a
Slings general Slings general requirementsrequirements• Use padded slingsUse padded slings
• Don’t shock Don’t shock load slingsload slings
• Watch your Watch your fingersfingers
7b
Sling attachments and safe Sling attachments and safe operationoperation • Fiber wire core rope slings Fiber wire core rope slings
• Nonfiber core wire rope slings Nonfiber core wire rope slings
• Proof test Proof test
8a
Natural or synthetic fiber Natural or synthetic fiber rope slings rope slings • Table H-15, 16, 17, and 18 applyTable H-15, 16, 17, and 18 apply
• Follow mfg. recommendationsFollow mfg. recommendations
• Don’t use knotsDon’t use knots
9a
Splicing natural or Splicing natural or synthetic slingssynthetic slings • Requirements for full tucksRequirements for full tucks
• Don’t use knotsDon’t use knots
• Don’t use clampsDon’t use clamps
• Watch for sharp edgesWatch for sharp edges
10a
Remove natural or Remove natural or synthetic slingssynthetic slings • Abnormal wearAbnormal wear
• Powdered fiberPowdered fiber
• Broken or cut fibersBroken or cut fibers
10b
Remove natural or Remove natural or synthetic slingssynthetic slings• Variations in size of strandsVariations in size of strands
• Discoloration or rottingDiscoloration or rotting
• Distortion of hardwareDistortion of hardware
10c
Marking/coding synthetic Marking/coding synthetic webbingwebbing • Name of manufacturerName of manufacturer
• Rated capacityRated capacity
• Type of materialType of material
11a
Synthetic webbing Synthetic webbing requirementsrequirements • Don’t exceed capacityDon’t exceed capacity
• Uniform thicknessUniform thickness
• Fittings as strong as slingFittings as strong as sling
• Use stitching to attach fittingsUse stitching to attach fittings
11b
Synthetic webbing Synthetic webbing precautionsprecautions • Fumes, vapors, sprays, mists, Fumes, vapors, sprays, mists,
liquidsliquids
• Nylon web slingsNylon web slings
11c
Synthetic webbing Synthetic webbing precautionsprecautions• Polyester and polypropylene slingsPolyester and polypropylene slings
• Temperature restrictionsTemperature restrictions
11d
Remove synthetic webbingRemove synthetic webbing
• Acid or caustic burnsAcid or caustic burns
• Melting or charringMelting or charring
• Snags, punctures, tearsSnags, punctures, tears
• Distortion of fittingsDistortion of fittings
11e
Shackles and hooks Shackles and hooks
• Table H-19 for safe working loadsTable H-19 for safe working loads
• Follow the manufacturer’s Follow the manufacturer’s recommendationsrecommendations
• Test hooksTest hooks
12a