+ All Categories
Home > Documents > Rigid Foaming Polyurethane Grout - Ronacrete (Far … jacking Project References ... The Rigid...

Rigid Foaming Polyurethane Grout - Ronacrete (Far … jacking Project References ... The Rigid...

Date post: 21-Apr-2018
Category:
Upload: nguyennhan
View: 215 times
Download: 0 times
Share this document with a friend
2
Ronacrete (Far East) Ltd. PRODUCT DATA ISO 9001 : 2008 Certificate No.: CC 1983 Rigid Foaming Polyurethane Grout Descripon Ronabond PU 10 is an MDI based, single-component polyurethane resin. This system reacts rapidly when in contact with water to provide a strong and rigid polyurethane seal capable of shung down large water leaks. Ronabond PU 10 is also suitable as a soil stabilisaon binder in tunnelling and trench construcon. The reacon me of Ronabond PU 10 can be adjusted to suit the condions during applicaon by varying the level of catalyst. Advantages Low viscosity Resistant to many organic solvents, mild acids, alkalis and common chemicals Solvent free Non-flammable Injected as a single component Variable reacon speed Uses High speed sealing of leaking cracks Soil stabilisaon Back groung Underpinning Slab jacking Project References Include Highways Department Hong Kong Airport Authority Tysan Foundaon Ronabond PU 10
Transcript

Ronacrete (Far East) Ltd.

PRODUCT DATAISO 9001 : 2008Certificate No.: CC 1983

Rigid Foaming Polyurethane Grout

Description

Ronabond PU 10 is an MDI based, single-component polyurethane resin. This system reacts rapidly when in contact with water to provide a strong and rigid polyurethane seal capable of shutting down large water leaks. Ronabond PU 10 is also suitable as a soil stabilisation binder in tunnelling and trench construction.

The reaction time of Ronabond PU 10 can be adjusted to suit the conditions during application by varying the level of catalyst.

Advantages Low viscosity Resistant to many organic solvents, mild acids, alkalis and common chemicals Solvent free Non-flammable Injected as a single component Variable reaction speed

Uses High speed sealing of leaking cracks Soil stabilisation Back grouting Underpinning Slab jacking

Project References Include Highways Department Hong Kong Airport Authority Tysan Foundation

Ronabond PU 10

leung.jade
Rectangle

DisclaimerThe information herein is liable to modification in the light of experience and ongoing development. Before use you are advised to check with Ronacrete (Far East) Ltd. to ensure this is the latest issue. Any person or company using the product without first enquiring about its suitability for the intended use does so at their own risk and Ronacrete (Far East) Ltd. can accept no responsibility for the results or for any loss or damage arising out of such use. Unless otherwise stated all data shown is typical laboratory results achieved in ideal conditions, site results may differ.Ronacrete (Far East) Ltd. is the Marble Patron Member of Hong Kong Green Building Council (HKGBC) in 2015. For the latest membership status of Ronacrete (Far East) Ltd. in HKGBC, please refer to the HKGBC official website.

Waterproofing

www.ronacrete.com.hk

Ronacrete (Far East) Limited 16/F., 3 Lockhart Road, Wanchai, Hong Kong SAR Tel : (852) 2865 5872 Fax : (852) 2865 5568 E-mail : [email protected]

HKCRWA

RFE

WP

003/

Jul 2

015

Specification ClauseThe Rigid Foaming Polyurethane Grout shall be Ronabond PU 10 by Ronacrete (Far East) Limited, tel. (852) 2865 5872 used in accordance with the manufacturer’s instructions.

Technical Data @ 23˚CColour BrownViscosity 100-200 cpsDensity 1.1 – 1.2 kg/lFlash point >150˚CApplication temp. 0˚C to 40˚CReaction time 10 – 30 seconds

PackagingRonabond PU 10 20 & 200 kg drumsRonaCat 2 & 20 kg drums

The reaction time of Ronabond PU 10 must be adjusted on site to suit the conditions by altering the addition level of RonaCat. The level of RonaCat will depend on the ambient temperature, temperature of the substrate and the reaction speed required. The minimum level of catalyst required is 1% and the maximum is 10% by weight.

Use RonaCat AdditionSoil stabilization 1%Water cut-off above 10˚C 5%Water cut-off below 10˚C 10%Water cut-off against high water flow 10%

The recommended application method is to use a single-component high-pressure pump to inject the catalysed resin into cracks or soil..

Under special circumstances where the water pressure is low or the volume to be injected is small a grease gun or cartridge gun can be used.

Safety

Avoid contact with skin & eyes.

Wear safety glasses, gloves and overalls.

Avoid inhaling vapours.

Read the Health & Safety data sheet before use.

Storage

Store at between 10˚C and 40˚C.

Keep containers closed when not in use.

Stir well before use.

Shelf life 12 months in unopened containers.

Technical Service and SupportRonacrete provide free technical advice and support during design and installation of all systems for flooring, concrete repair, bonding, bedding and water-proofing. If you need any further information or a full technical data sheet contact the Ronacrete Technical Department on (852) 2866 4365 or visit our web site www.ronacrete.com.hk.

GuaranteeRonacrete products are guaranteed fit for purpose and of merchantable quality.

Application (*Please Refer to the Method Statement and MSDS)

leung.jade
Rectangle
leung.jade
Stamp
leung.jade
Stamp
leung.jade
Rectangle
leung.jade
Rectangle

Recommended