Assembly FramesRittal Assembly Frames are mobile, tiltable and (depending on the version) height-adjustable assembly frames for use during the automation and rationalization of processes throughout every stage of machining, assembly, wiring and testing of enclosures.
Cable Duct and DIN rail cuttingNo lengthy times spent on measuring and cutting, and no complicated handling. Secarex cutting center is convenient to use and cuts wiring ducts, cable duct covers and support rails to length quickly, precisely and reliably.
Semi-automatic wire processingRittal wire processing machines automatically cut, strip and install ferrules. In addition, a variety of cross-section wire sizes can be used with complete control over length, strip length and size of ferrules.
Hand ToolsRittal high-quality hand tools are designed specifically for the modification and assembly tasks. Their rugged construction and ergonomic design ensure they will be a valuable part of your toolbox for years to come..
Rittal Has More To Offer. Automated products can increase the efficiency of your modification operations.
With the purchase of the Perforex Machine, your business will take a giant leap forward in automating your modification operations.
As your company evolves with machining automation, Rittal is there to deliver a full suite of products to enhance process efficiency.
Find out more about each of these products and services in this brochure!
2
We reserve the right to make technical modifications Perforex Machining
Automation in enclosure manufacturing
Perforex machining centers BCPerforex machining centers were designed specifically for panel building and switchgear manufacturing to optimize the machining of large enclosure panels, wall mount enclosures and mounting panels in the workshop and boost efficiency. Perforex machining centers can automatically create holes, threads and milled openings in the workpiece. All standard materials used in enclosure man-ufacturing, such as steel, stainless steel, aluminum and copper, as well as various plastics and other machinable materials, mounting plates, painted doors, covers, console plates, housings etc. may be machined.
Software
The user interface of a Perforex machining center is an intui-tive workshop programming system which supports remote maintenance. The software is networkable, uses a central database, and may be used on an unlimited number of different PCs within the company. This means that all programmed jobs are immediately avail-able on the machine and can be reused. Alternatively, almost any standard CAD and E-planning system can be used for programming.Ask about our interfaces.
Hardware
Depending on the model, enclosure panels up to (W x H) 3600 x 2200 mm (141.7 x 86.6 in.) and enclosures up to (W x H x D) 2300 x 2200 x 2200 (90.5 x 86.6 x 86.6 in.) mm may be clamped and pneumatically secured. As standard, the tool magazine can simultaneously accommodate 18 or 20 tools. Up to 40 tools are optionally available. With the motorized depth adjustment for enclosures and a wide range of options, Perforex machines are equipped for the optimum handling of all parts.
n User-friendly workshop programming with inter-faces to all standard CAD systems (DXF import),plus direct transfer of the machining data fromEPLAN Pro Panel
n Transfer of configuration data from theRittal Configuration System (RiCS)
Item name Perforex BC 1001 HS Perforex BC 1007 HS Perforex BC 1008 HS Perforex BC 2014 HS
Clampable enclosure panelsW x H mm (W X H in.)
2500 x 1500 (98.4 x 59 in.)
2450 x 1700 (96.4 x 66.9 in.)
2300 x 1550 (90.5 x 61 in.)
3600 x2200 (141.7 x 86.6 in.)
Maximum machinable areafor panels W x H mm (W x H in.)
2260 x 1500 (88.9 x 59 in.)
2200 x 1700 (86.6 x 66.9 in.)
2300 x 1700 (90.5 x 66.9 in.)
3600 x 2200 (141.7 x 86.6 in.)
Clampable cubic partsW x H x D mm (W x H in.)
1200 x 1400 x 1400 (47.2 x 55.1 x 55.1 in.)
1400 x 1600 x 1600 (55.1 x 62.9 x 62.9 in.)
2300 x 1600 x 2200 (90.5 x 62.9 x 86.6 in.)
1400 x 2200 x 2200 (55.1 x 86.6 x 86.6 in.)
Option of extended carriageW x H x D mm (W x H x D in.) –– 1400 x 1600 x 2000
(55.1 x 62.9 x 78.7 in.) — —
Maximum machinable areafor cubic parts W x H mm (W x H in.)
750 x 1400 (29.5 x 55.1 in.)
1200 x 1600 (47.2 x 62.9 in.)
2300 x 1600 (90.5 x 62.9 in.)
1100 x 2200 (43.3 x 86.6 in.)
Two-door option W x H x D mm (W x H x D in.) –– –– –– 2300 x 2200 x 2200 (90.5 x 86.6 x 86.6 in.)
Model No. 4050.101 4050.107 4050.108 4050.230
3
Automation in enclosure manufacturing
Perforex laser center LCThe 3D laser technology of the Perforex LC series is ideally suited to the machining of stainless steel and sheet steel, as well as powder-coated parts such as enclosure doors, side panels etc. Painted metal parts are cut without any visible paint damage or discoloration, even with delicate contours. Additionally, there is no tarnishing of the cut edges when machining stainless steel. The Perforex LC series is cost-effective from machining volumes of around 150 stainless steel enclosures or 300 painted carbon enclosures per year.
Technical specifications
◾ Machining of material thicknesses up to 5 mm (0.2 in.)◾ Machining range (H x W x D) 2300 mm x 1270 mm x 800 mm
(90.55 x 50 x 31.4 in.) for product ranges from AE to TS 8◾ Machining of enclosures on 5 sides without repositioning◾ Very narrow beam cutting width of just approximately 0.3 mm
(0.01 in.)◾ No need to clamp the workpieces
Scope of supply
◾ Laser center including safety housing◾ Compressor◾ Filter system◾ Operating unit
Item name Model No.
LC 3015 Perforex laser center, 1500/150 W (Pulse/CW) 4050.315
LC 3030 Perforex laser center, 3000/300 W (Pulse/CW) 4050.330
Options Model No.
Thread tapping function (includes an additional drive unit plus thread tappers, including clamping jaws for tooling and 6 positions for taps)
4050.318
Roof/ceiling for safety housing 4050.317
Optional Accessorles Model No.
Cover glass 4050.321
Nozzle 4050.322
Stop blocks 4050.323
Lubricants 4050.324
Filter cartridge set 4050.325
Gland plate set 4050.326
Cleaning cloths 4050.327
Cleaning spray 4050.328
Welding gun spray 4050.329
Note:– The machine housing (roof)
4050.317 is mandatory ifthe machine can be viewedfrom above
n User-friendly workshop programming similarto Perforex BC with central database
nMachine operation with 3D visualizationn Includes Perforex Workshop Programming
database, interfaces to EPLAN Pro Panel andprocessing of the neutral format “DXF”
n Transfer of configuration data from theRittal Configuration System (RiCS)
We reserve the right to make technical modifications Perforex Machining4
Automation in enclosure manufacturing
Secarex AC 18 cutting centerThe Secarex cutting center is convenient to use and cuts wiring ducts, cable duct covers and DIN rails to length quickly, precisely and reliably. The integral label printer provides project-specific labeling of the DIN rails and cable ducts. The cutting center contributes to improved quality, an optimization of cutting waste, lower costs and an accelerated overall process.
Benefits
◾ Waste cost are reduced due to optimization of the cuttingprocess
◾ Significant time savings compared to manual cutting◾ Clean cuts with high-performance tools◾ Five DIN rail sizes in one template
Technical specifications
◾ Modern operator station: 18.5” monitor, swivel pendant arm,industrial PC with i3 processor, and keyboard with trackball
◾ Electrical connection: 230 V, 50/60 Hz◾ Pneumatic connection: 6 bar◾ Machinable DIN rail type;
– C rails 30/15 (to EN 60 715)– DIN rails 15 (to EN 60 715)– DIN rails 35/15 (to EN 60 715)– DIN rails 35/7.5 (to EN 60 715)– Busbars CU 3/10
Scope of supply
◾ Secarex cutting center◾ Label printer◾ Operator station
Item name Model No.
Secarex AC 15 cutting center 4050.405
Options Model No.
Mousepad support, vertically hinged 2383.020
Cutting of other DIN rail shapes can be quoted 4050.491
Drawer system, left side 4050.441
Storage system, right side 4050.442
We reserve the right to make technical modifications Perforex Machining5
Wire processing in enclosure manufacturing
Stripping machine S22The stripping machine S22 is electrically driven. It ensures accurate, careful stripping of the insulation from your wires. The draw-off and stripping length is set with linear control. The stripping machine also features a pre-integrated spare blade inside the enclosure. Other benefits include the running total counter and daily counter, which are easily read from the touch display.
2
7
We reserve the right to make technical modifications
We reserve the right to make technical modifications
Parameters
Drive Electric motor
Power consumption 70 VA
Voltage 100 – 240 V
Frequency 50/60 Hz
Dimensions (W x H x D) 190 x 190 x 295 mm
Weight 7.5 kg
Item name Model No.
Stripping machine S22 4050.451
Accessories
Insulation stripping blade, titanium 4050.464
Supply includes
◾◾ Stripping machine S22
◾◾ Mains connection cable
Technical specifications
◾◾ For wires with cross-sections from 0.05 – 6 mm2
◾◾ Wire stripping length from 3 – 20 mm
◾◾ Insertion length 22 mm
Parameters
Drive Electric motor
Power consumption 100 VA
Voltage 100 – 240 V
Frequency 50/60 Hz
Dimensions (W x H x D) 288 x 345 x 230 mm
Weight 16 kg
Item name Model No.
Crimping machine R8 E 4050.454
Supply includes
◾◾ Crimping machine R8 E
◾◾ Mains connection cable
Crimping machine R8 EElectrically powered wire stripping and crimping machine for taped wire end ferrules on a reel. The R8 E crimping machine supports the fast, meticulous processing of insulated wire end ferrules and standard PVC cables in cross-sections ranging from 0.5 – 2.5 mm² (AWG 20 – 14) with a crimping length of 8 mm. For flexible use in the workshop, all you need is a power connection.
Technical specifications
◾◾ Supports machining of conductorcross-sections from 0.5 – 2.5 mm²
◾◾ Electrically powered
Parameters for crimping machine RC
Drive Electro-pneumatic
Power consumption 16 VA
Voltage 100 – 240 V
Frequency 50/60 Hz
Operating pressure 5.5 bar
Dimensions (W x H x D) 335 x 565 x 485 mm
Weight 22 kg
Frame for max. 23,000 wire end ferrules
Item name Model No.
Crimping machine RC 4050.456
Accessories
Insulation stripping blade kit, titanium 4050.466
Parameters for crimping machine L8
Drive Electro-pneumatic
Power consumption 110 VA
Voltage 100 – 240 V
Frequency 50/60 Hz
Operating pressure 5.5 bar
Dimensions (W x H x D) 390 x 330 x 460 mm
Weight 31 kg
Item name Model No.
Crimping machine L8 4050.452
Accessories
Oscillating conveyor 0.5 – 1.5 mm² 4050.467
Oscillating conveyor 1.5 – 2.5 mm² 4050.468
Insulation stripping blade kit 4050.466
Supply includes
◾◾ Crimping machine L8
◾◾ Oscillating conveyor(2 pcs.)
◾◾ Mains connection cable
Supply includes
◾◾ Crimping machine RC
◾◾ Mains connection cable
Technical specifications, L8 and RC
◾◾ Machining of conductor cross-sectionsfrom 0.5 – 2.5 mm2
◾◾ Automatic detection of cross-sections
◾◾ Handling of special wires supported
◾◾ UL-certified crimping with wire end ferrules from Rittal
◾◾ User-friendly menu prompting via touch display
◾◾ Insertion length 27 mm (1.06 in.). Cycle time < 2 sec.
Alternatively: R8 crimping machine (Model No. 4050.453) for processing wire end ferrules on a reel.
Wire processing in enclosure manufacturing
Crimping machine L8 and RCElectro-pneumatically driven wire-stripping and crimping machine for safe, fast processing of insulated wire end ferrules. The particular value-added of our electro-pneumatic crimping machines is their fully automated detection of the wire cross-section and processing of the wire end ferrules, with no tool changes required. Linear adjustment of the blades and the high force of the pneumatically driven crimping unit means that all standard cables as well as special ferrules (AWG) in the application range from 0.5 to 2.5 mm² (AWG 20 – 14) may be processed with a crimping length of 8 mm.
6 We reserve the right to make technical modifications
8
Wire processing in enclosure manufacturing
Length-cutting machine C8+The C8+ length-cutting machine is sure to impress with its simple, reliable handling. Wires with up to 8 mm or 10 mm2 diameter may be cut to an individually set length, ensuring more efficient operating processes. It also guarantees excellent repetition accuracy thanks to the precise servo DC drive. Cutting jobs can also be managed, documented and transmitted via a USB interface from the PC or CAE data interface (EPLAN Pro Panel). In this way, the C8+ length-cutting machine additionally supports the process oflabelling cables and wiring by displaying the source/target code.
Ergonomics in enclosure manufacturing
Assembly framesOur assembly frames are mobile, tiltable and (depending on the version) height-adjustable frames for machining mounting plates and enclosures. All types offer simple, variable fixing of mounting plates using quick-release fasteners, are independent from the mains power, and take up minimal space when not in use.
n Tilt-adjustable and optionally height-adjustable for ergonomic, effective, time-saving construction, wiring and testing of mounting plates or complete enclosures
n Easily maneuverable with industrial rated locking casters
Numerous adaptation options availablen Widening to 1900 mm (74.8 in.)n Wire routingn Wire reel handlern Reel track for side insertion of mounting platesn More options on page 8
Item name Assembly Frame 150 MN Assembly Frame 200 EN Assembly Frame 300 ENH
Adjustment range Infinitely adjustable from the vertical to the horizontal using a crank handle
Infinitely adjustable tilt angle via battery-powered electric motor
Infinitely adjustable height and tilt angle via battery-powered electric motor
Working height (ft.) 1 m (3.2 ft.) 0.90m (2.9 ft.) 0.80 – 1.10m (2.62 – 3.6 ft.)
Tilt adjustment approx. 0 – 80° approx. 0 – 80° approx. 0 – 80°
Dimensions (W x D) mm (in.) 1400 x 1250 (55.11 x 49.2 in.) 1400 x 1250 (55.11 x 49.2 in.) 1400 x 1250 (55.11 x 49.2 in.)
Clampable workpieces (H x W) mm (in.)
min. 1110 x 1250max. 1110 (1900) x 1900
min. 1110 x 1250max. 1110 (1900) x 1900
min. 1110 x 1250max. 1110 (1900) x 1900
Maximum support load (lbs.) 150 kg (330 lbs.) 200 kg (440.1 lbs.) 300 kg (661 lbs.)
Model No. 4050.150 4050.200 4050.300
We reserve the right to make technical modifications We reserve the right to make technical modifications 9
◾◾ Dispensing device forthe infeed of conduc-tors. Suitable forconductors on cablecoils or from boxes.
◾◾ Spare blade, titanium
Parameters
Drive Electric motor
Power consumption 240 VA
Voltage 100 – 240 V
Frequency 50/60 Hz
Dimensions (W x H x D) 380 x 470 x 360 mm
Weight 20 kg
Item name Model No.
Length-cutting machine C8+ 4050.455
Wire dispenser 4050.463
Accessories
Spare blade, titanium 4050.465
Supply includes
◾◾ Length-cutting machine C8+
◾◾ Software connection, CAE data on CD
◾◾ Mains connection cable
Technical specifications
◾◾ Jobs are programmed and executedwith an integrated operating terminal
◾◾ Controllable pressing force of the feed rollers
◾◾ Up to 2,000 cutting jobs may be stored
◾◾ Pause function
◾◾ Interface:– CAE data (EPLAN Pro Panel)– USB 1.1, USB 2.0
◾◾ Strand, fine-wire: 0.08 – 10 mm²
◾◾ Strand, single-wire: 0.08 – 2.5 mm²
◾◾ For wire lengths: 1 – 99999 mm
◾◾ Feed rate: 1.5 m/s
Ergonomics in enclosure manufacturing
LT 1000 storage and transport trolleyThe LT 1000 workpiece stillage and transport trolley ensures easy handling and storage of enclosure panels. It is individually adjustable due to height-adjustable supports and with effortless storage and transportation of enclosure panels the LT 1000 offers user-friendly transportation on industrial casters.
Practical and mobile
Functional trolleyThe functional trolley is a veritable multi-talent. Whether for transporting materials and tools to the installation site or forcommissioning, the functional trolley is perfectly suited for assembly technicians and service personnel.The refined system with its fold-out concept is the ideal solution when you are on the road, and its compact dimensionsmean it can be transported by car.
n Individually adjustable due to height adjustable supports
n Eight wide compartments for effortless storage and transportation of enclosure panels
n User-friendly transportation through the workshop on casters
Technical specifications
n Support surface W x D 1000 x 1000 mm (39.3 x 39.3 in.) n Height 1500 mm (59 in.)n Max. load capacity 500 kg (1102 lbs.)
Item name Model No.
LT 1000 storage and transport trolley 4050.000
Item name Model No.
Functional trolley 4050.130
n Surface suitable for computer mouse
n Made from V2A stainless steel for robustness and durability
n Converts from a transport function to a desk by simply unfolding
10 We reserve the right to make technical modifications We reserve the right to make technical modifications 11
6 7
Accessories for assembly frame Other Accessories
Assembly frame extensionTo widen assembly frames 150 MN, 200 EN, 300 ENH to a maximum width of 1900 mm (74.80 inches).
To fit Model No.
Packs of Model No.
4050.150/4050.200/4050.300
2 pc(s). 4050.210
Wire reel holder for assembly frameFor adapting wire reels or drums on assembly frame 150 MN, 200 EN, 300 ENH.
Roller conveyor for assembly frameFor inserting the mounting plate from the side into the enclosure. To fit assembly frame 300 ENH.
Clamping unit for assembly frameFor secure attachment of a mounting panel onto assembly frame 150 MN, 200 EN, 300 ENH.
To fit Model No.
Packs of Model No.
4050.150/4050.200/4050.300
1 pc(s). 4050.216
To fit Model No.
Packs of Model No.
4050.300 1 pc(s). 4050.220
To fit Model No.
For DesignProduct specific scope of supply
Packs of Model No.
4050.150/4050.200/4050.300
Mounting panel TS/SE
Top1 clamping unit pack,
top1 pc(s). 4050.213
4050.150/4050.200/4050.300
Mounting panel TS/SE
Bottom1 clamping unit pack,
bottom1 pc(s). 4050.214
12
Screwdriver
Screwdriver setInsulated Multi-part screwdriver set. With a long, slender handle and high-performance tips with non-marking insulation.
Benefits:
– Minimal force required due to ergonomicallystyled handle
– Handle head with anti-roll protection and clearscrew labelling
– Black coated blade tip to preserve precision andaccuracy of fit
– Handle 30% and insulation up to 50% thinnerthan comparable tools
Material:– Blade: Chrome-molybdenum-vanadium alloy– Handle core: Hard plastic– Handle body: Elastic, highly flexible plastic
Color:– Handle: Anthracite and Rittal pink
Supply includes:– Set with 5 screwdrivers
Standards:– IEC 60 900
Approvals:– VDE– Tested Safety
Blade tip Packs of Model No.
SL 3 x 05 mm SL 4 x 0.8 mm SL5.5 x 1.mm
PH 1 PH 2
1 pc(s). 4052.210
SL 3 x 05 mm SL 4 x 0.8 mm SL5.5 x 1.mm
PZ 1 PZ 2
1 pc(s). 4052.211
SL 3 x 05 mm SL 4 x 0.8 mm
PH 1 PH 2Z2
1 pc(s). 4052.212
Screwdriver setUninsulated Multi-part screwdriver set.
Benefits:
– Minimal force required due to ergonomicallystyled handle
– Handle head with anti-roll protection and label- ling of screw type– Black coated blade tip to preserve precision and
accuracy of fit
Material:– Blade: Chrome-molybdenum-vanadium alloy– Handle core: Hard plastic– Handle body: Elastic, highly flexible plastic
Color:– Handle: Anthracite and Rittal pink
Approvals:– Tested Safety GS
Blade tipProduct
specific scope of supply
Packs of
Model No.
SL 3.5 x 06 mm SL 6.5 x 1.2 mm
PZ 1PZ 2 PH 1 PH 2
6-part set 1 pc(s). 4052.200
PH 1 PH 2 TX 15 TX 20 TX 25 TX 30
6-part set 1 pc(s). 4052.201
TX 10 TX 15 TX 20 TX 25 TX 30
5-part set 1 pc(s). 4052.202
Interchangeable screwdriver setUninsulated 13-piece tool set with ergonomic, foldable, lockablehandle
Technical specifications:
– PH 1 - SL 4 X 0.8 mm– PH 2 - PH 3– PZ 1 - SL 5 x 0.8 mm– PZ 2 - SL 6 x 1 mm– PZ 3 - SL 7 x 1.2 mm– TX 6 - TX 7– TX 8 - TX 9– TX 10 - TX 15– TX 20 - TX 25– TX 30 - TX 40– Hex socket 3 mm -hex socket 4 mm– Hex socket 5 mm -hex socket 6 mm
Material:– Blade: Chrome-molybdenum-vanadium alloy– Handle core: Hard plastic– Handle body: Elastic, highly flexible plastic
Color:– Handle: Anthracite and Rittal pink
Supply includes:– Combined blade holder
Screwdriver and T handle– 12 blades each with 2 tips– Storage box
Blade length
mm (in.)
Handle length
mm (in.)
Handle dia.
mm (in.)
Packs of
Model No.
160 (6.29)
105 (4.13)
39 (1.5)
1 pc(s). 4053.450
We reserve the right to make technical modifications We reserve the right to make technical modifications 13
PliersCutting tools
14 We reserve the right to make technical modifications We reserve the right to make technical modifications 15
Side cutterFor copper and aluminum conductors.
Benefits:
– Guarantees long-term stable cutting performance and a clean cut– Ergonomically styled handles for fatigue-free
non-slip working
Material:– High quality special tool steel
Surface finish:– Matt, plated
Color:– Handle: Anthracite and Rittal pink
For cable diameters mm (in.)
Length mm (in.)
Design Packs of Model No.
0.2 - 11 (.0078 - .433)
160 (6.29) Straight 1
pc(s). 4054.600
Cable cutterFor copper and aluminum conductors.
Benefits:
– Ergonomically styled handles for fatigue-free,non-slip working
Material:– High-quality special tool steel
Color:– Handle: Anthracite and RIttal pink
Electronic side cutterWith pointed head, 21° angled blades and small chamfer.
Benefits:
– Even, smooth-running opening with opening spring– Ergonomically styled handles– Box-joint for permanent stability and optimum
force progression
Material:– High quality special tool steel
Surface finish:– Polished, oiled
Color:– Handle: Anthracite and Rittal pink
Length mm (in.) Packs of Model No.
115 (4.52) 1 pc(s). 4054.750
For cross-section
mm² (in.²)
For cable diameters mm (in.)
Length mm (in.) Design Packs of Model No.
0.5 - 35 (.0007 - .0542) 12 (.472) 160 (6.29) Straight 1 pc(s). 4054.650
0.5 - 50 (.0007 - .0775) 18 (.708) 180 (7.08) Angled 1 pc(s). 4054.660
Electrician‘s scissorsFor cutting copper, aluminum, Kevlar and plastic.
Benefits:
– High cutting performance due to micro-serrationin the cutting zone
– Ergonomically styled handles– Two-component handle with anti-slip soft zone– Adjustable screw joint
Material:– High quality special tool steel
Surface finish:– Brushed
Color:– Handle: Anthracite and Rittal pink
For cable diameters mm (in.)
Length mm (in.) Packs of Model No.
0.1 - 3.7 (.0039 - .1456)
160 (6.29) 1 pc(s). 4054.700
Slip-joint pliersFor width across flats 10 - 36 mm (.393 - 1.41 in.).
Length mm (in.) Packs of Model No.
260 (10.2) 1 pc(s). 4054.900
Benefits:– Ergonomically styled handles for fatigue-free,
non-slip working– Smooth clamping surfaces avoid the usual
damage caused by wrenches and pipewrenches on screws/nuts
– QuickSnap retcheting for fast adjustment to theworkpiece with no push-button
– Robust box-joint
Crimping pliersfor wire end ferrulesFor use with wire end ferrules with no insulating collar to DIN 46228 Part 1 and wire end ferrules with insulating collar to DIN 46228 Part 4.
Benefits:
– Minimal effort required with large conductorcross-sections
– Uniform high quality compression– Marked die stations for precise crimping of the
relevant cross-sections– Releasable ratchet
For cross-section
mm2 (in.2)AWG Direction of
cable entry Compression Length mm (in.) Design Packs of Model No.
0.25 - 6 (.0003 - .009) 24 -10 Side Trapezoid
crimp198
(7.79) Angled 1 pc(s). 4054.000
0.5 - 6 (.0007 - .009) 22 - 10 Front Square
crimp198
(7.79) Angled 1 pc(s). 4054.001
10 - 25 (.01 - .038) 8 - 4 Side WM crimp 256
(10.07) Straight 1 pc(s). 4054.004
35 - 50 (.054 - .077 2 - 1 Side WM crimp 256
(10.07) Straight 1 pc(s). 4054.008
Combination pliersWith serrated gripping surface and integral ring spanner M8 to M10.
Length mm (in.) Packs of Model No.
180 (7.08) 1 pc(s). 4054.800
Benefits:– Ergonomically styled handles for fatigue-free,
non-slip working– High force transmission for good holding
and cutting performace– Minimal force required
Needle-nose pliersWith serrated gripping surface
Length mm (in.) Packs of Model No.
200 (7.87) 1 pc(s). 4054.850
Benefits:– Ergonomically styled handles for fatigue-free,
non-slip working
Electronic needle-nose pliersWith smooth gripping surface.
Length mm (in.) Packs of Model No.
120 (4.72) 1 pc(s). 4054.860
Benefits:– Ergonomically styled handles for fatigue-free,
non-slip working– Even, smooth-running opening with opening
spring
Material: High-quality special tool steel; Surface finish: Matt, plated; Color: Handle: Anthracite and Rittal pink
Rittal Systems Ltd.6485 Ordan Drive • Mississauga, Ontario L5T 1X2 • Canada Phone: 905-795-0777 • Toll-free: 800-399-0748 E-Mail: [email protected] • Online: www.rittal.ca
n Enclosuresn Power Distributionn Climate Controln IT Infrastructuren Software & Services