25
LTE Radio Access, Rel. RL70, Operating Documentation, Issue 01 Flexi Multiradio BTS LTE Commissioning, Transmission Parameters DN09147584 Issue 03A Approval Date 2014-11-21
LTE Radio Access, Rel. RL70, Operating Documentation, Issue 01
Flexi Multiradio BTS LTE Commissioning, RNW and Transmission Parameters
DN09147584Issue 03AApproval Date 2014-11-21
LTE Radio Access, Rel. RL70, Operating Documentation, Issue 01
Flexi Multiradio BTS LTE Commissioning, RNW and Transmission Parameters
DN09147584Issue 03AApproval Date 2014-11-21
The information in this document applies solely to the hardware/software product (“Product”) specifiedherein, and only as specified herein.
This document is intended for use by Nokia Solutions and Networks' customers (“You”) only, and it may notbe used except for the purposes defined in the agreement between You and Nokia Solutions and Networks(“Agreement”) under which this document is distributed. No part of this document may be used, copied,reproduced, modified or transmitted in any form or means without the prior written permission of NokiaSolutions and Networks. If you have not entered into an Agreement applicable to the Product, or if thatAgreement has expired or has been terminated, You may not use this document in any manner and Youare obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof.
The document has been prepared to be used by professional and properly trained personnel, and Youassume full responsibility when using it. Nokia Solutions and Networks welcome Your comments as part ofthe process of continuous development and improvement of the documentation.
This document and its contents are provided as a convenience to You. Any information or statementsconcerning the suitability, capacity, fitness for purpose or performance of the Product are given solely onan “as is” and “as available” basis in this document, and Nokia Solutions and Networks reserves the rightto change any such information and statements without notice. Nokia Solutions Networks has made allreasonable efforts to ensure that the content of this document is adequate and free of material errors andomissions, and Nokia Solutions and Networks will correct errors that You identify in this document. But,Nokia Solutions and Networks' total liability for any errors in the document is strictly limited to the correctionof such error(s). Nokia Solutions and Networks does not warrant that the use of the software in the Productwill be uninterrupted or error-free.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TOANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT,MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THECONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BELIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT,INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OFPROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAYARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OFERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT.
This document is Nokia Solutions and Networks’ proprietary and confidential information, which may not bedistributed or disclosed to any third parties without the prior written consent of Nokia Solutions andNetworks.
Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this documentmay be trademarks of their respective owners, and they are mentioned for identification purposes only.
Copyright © 2014 Nokia Solutions and Networks. All rights reserved.
Important Notice on Product SafetyThis product may present safety risks due to laser, electricity, heat, and other sources of danger.
Only trained and qualified personnel may install, operate, maintain or otherwise handle thisproduct and only after having carefully read the safety information applicable to this product.
The safety information is provided in the Safety Information section in the “Legal, Safety andEnvironmental Information” part of this document or documentation set.
Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of itsproducts and services. We would like to encourage you as our customers and users to join us in workingtowards a cleaner, safer environment. Please recycle product packaging and follow the recommendationsfor power use and proper disposal of our products and their components.
If you should have questions regarding our Environmental Policy or any of the environmental services weoffer, please contact us at Nokia Solutions and Networks for any additional information.
The information in this document applies solely to the hardware/software product (“Product”) specifiedherein, and only as specified herein.
This document is intended for use by Nokia Solutions and Networks' customers (“You”) only, and it may notbe used except for the purposes defined in the agreement between You and Nokia Solutions and Networks(“Agreement”) under which this document is distributed. No part of this document may be used, copied,reproduced, modified or transmitted in any form or means without the prior written permission of NokiaSolutions and Networks. If you have not entered into an Agreement applicable to the Product, or if thatAgreement has expired or has been terminated, You may not use this document in any manner and Youare obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof.
The document has been prepared to be used by professional and properly trained personnel, and Youassume full responsibility when using it. Nokia Solutions and Networks welcome Your comments as part ofthe process of continuous development and improvement of the documentation.
This document and its contents are provided as a convenience to You. Any information or statementsconcerning the suitability, capacity, fitness for purpose or performance of the Product are given solely onan “as is” and “as available” basis in this document, and Nokia Solutions and Networks reserves the rightto change any such information and statements without notice. Nokia Solutions Networks has made allreasonable efforts to ensure that the content of this document is adequate and free of material errors andomissions, and Nokia Solutions and Networks will correct errors that You identify in this document. But,Nokia Solutions and Networks' total liability for any errors in the document is strictly limited to the correctionof such error(s). Nokia Solutions and Networks does not warrant that the use of the software in the Productwill be uninterrupted or error-free.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TOANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT,MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THECONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BELIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT,INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OFPROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAYARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OFERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT.
This document is Nokia Solutions and Networks’ proprietary and confidential information, which may not bedistributed or disclosed to any third parties without the prior written consent of Nokia Solutions andNetworks.
Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this documentmay be trademarks of their respective owners, and they are mentioned for identification purposes only.
Copyright © 2014 Nokia Solutions and Networks. All rights reserved.
Important Notice on Product SafetyThis product may present safety risks due to laser, electricity, heat, and other sources of danger.
Only trained and qualified personnel may install, operate, maintain or otherwise handle thisproduct and only after having carefully read the safety information applicable to this product.
The safety information is provided in the Safety Information section in the “Legal, Safety andEnvironmental Information” part of this document or documentation set.
Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of itsproducts and services. We would like to encourage you as our customers and users to join us in workingtowards a cleaner, safer environment. Please recycle product packaging and follow the recommendationsfor power use and proper disposal of our products and their components.
If you should have questions regarding our Environmental Policy or any of the environmental services weoffer, please contact us at Nokia Solutions and Networks for any additional information.
LTE Radio Access, Rel. RL70, Operating Documentation, Issue 01
Flexi Multiradio BTS LTE Commissioning, RNW and Transmission Parameters
DN09147584Issue 03AApproval Date 2014-11-21
LTE Radio Access, Rel. RL70, Operating Documentation, Issue 01
Flexi Multiradio BTS LTE Commissioning, RNW and Transmission Parameters
DN09147584Issue 03AApproval Date 2014-11-21
The information in this document applies solely to the hardware/software product (“Product”) specifiedherein, and only as specified herein.
This document is intended for use by Nokia Solutions and Networks' customers (“You”) only, and it may notbe used except for the purposes defined in the agreement between You and Nokia Solutions and Networks(“Agreement”) under which this document is distributed. No part of this document may be used, copied,reproduced, modified or transmitted in any form or means without the prior written permission of NokiaSolutions and Networks. If you have not entered into an Agreement applicable to the Product, or if thatAgreement has expired or has been terminated, You may not use this document in any manner and Youare obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof.
The document has been prepared to be used by professional and properly trained personnel, and Youassume full responsibility when using it. Nokia Solutions and Networks welcome Your comments as part ofthe process of continuous development and improvement of the documentation.
This document and its contents are provided as a convenience to You. Any information or statementsconcerning the suitability, capacity, fitness for purpose or performance of the Product are given solely onan “as is” and “as available” basis in this document, and Nokia Solutions and Networks reserves the rightto change any such information and statements without notice. Nokia Solutions Networks has made allreasonable efforts to ensure that the content of this document is adequate and free of material errors andomissions, and Nokia Solutions and Networks will correct errors that You identify in this document. But,Nokia Solutions and Networks' total liability for any errors in the document is strictly limited to the correctionof such error(s). Nokia Solutions and Networks does not warrant that the use of the software in the Productwill be uninterrupted or error-free.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TOANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT,MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THECONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BELIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT,INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OFPROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAYARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OFERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT.
This document is Nokia Solutions and Networks’ proprietary and confidential information, which may not bedistributed or disclosed to any third parties without the prior written consent of Nokia Solutions andNetworks.
Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this documentmay be trademarks of their respective owners, and they are mentioned for identification purposes only.
Copyright © 2014 Nokia Solutions and Networks. All rights reserved.
Important Notice on Product SafetyThis product may present safety risks due to laser, electricity, heat, and other sources of danger.
Only trained and qualified personnel may install, operate, maintain or otherwise handle thisproduct and only after having carefully read the safety information applicable to this product.
The safety information is provided in the Safety Information section in the “Legal, Safety andEnvironmental Information” part of this document or documentation set.
Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of itsproducts and services. We would like to encourage you as our customers and users to join us in workingtowards a cleaner, safer environment. Please recycle product packaging and follow the recommendationsfor power use and proper disposal of our products and their components.
If you should have questions regarding our Environmental Policy or any of the environmental services weoffer, please contact us at Nokia Solutions and Networks for any additional information.
The information in this document applies solely to the hardware/software product (“Product”) specifiedherein, and only as specified herein.
This document is intended for use by Nokia Solutions and Networks' customers (“You”) only, and it may notbe used except for the purposes defined in the agreement between You and Nokia Solutions and Networks(“Agreement”) under which this document is distributed. No part of this document may be used, copied,reproduced, modified or transmitted in any form or means without the prior written permission of NokiaSolutions and Networks. If you have not entered into an Agreement applicable to the Product, or if thatAgreement has expired or has been terminated, You may not use this document in any manner and Youare obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof.
The document has been prepared to be used by professional and properly trained personnel, and Youassume full responsibility when using it. Nokia Solutions and Networks welcome Your comments as part ofthe process of continuous development and improvement of the documentation.
This document and its contents are provided as a convenience to You. Any information or statementsconcerning the suitability, capacity, fitness for purpose or performance of the Product are given solely onan “as is” and “as available” basis in this document, and Nokia Solutions and Networks reserves the rightto change any such information and statements without notice. Nokia Solutions Networks has made allreasonable efforts to ensure that the content of this document is adequate and free of material errors andomissions, and Nokia Solutions and Networks will correct errors that You identify in this document. But,Nokia Solutions and Networks' total liability for any errors in the document is strictly limited to the correctionof such error(s). Nokia Solutions and Networks does not warrant that the use of the software in the Productwill be uninterrupted or error-free.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TOANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT,MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THECONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BELIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT,INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OFPROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAYARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OFERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT.
This document is Nokia Solutions and Networks’ proprietary and confidential information, which may not bedistributed or disclosed to any third parties without the prior written consent of Nokia Solutions andNetworks.
Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this documentmay be trademarks of their respective owners, and they are mentioned for identification purposes only.
Copyright © 2014 Nokia Solutions and Networks. All rights reserved.
Important Notice on Product SafetyThis product may present safety risks due to laser, electricity, heat, and other sources of danger.
Only trained and qualified personnel may install, operate, maintain or otherwise handle thisproduct and only after having carefully read the safety information applicable to this product.
The safety information is provided in the Safety Information section in the “Legal, Safety andEnvironmental Information” part of this document or documentation set.
Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of itsproducts and services. We would like to encourage you as our customers and users to join us in workingtowards a cleaner, safer environment. Please recycle product packaging and follow the recommendationsfor power use and proper disposal of our products and their components.
If you should have questions regarding our Environmental Policy or any of the environmental services weoffer, please contact us at Nokia Solutions and Networks for any additional information.
1. IntroductionThe purpose of this document is to assist users in finding parameters, their meanings, specifications, and default values. The managed objects and parameters are listed in alphabetical order.
2. How to read this excel reportThe excel report provides a full information on the parameter dictionary. It shows the full set of parameter attributes including the change information.
The excel report consists of two main sections:- MO Class Tree- Parameter List
2. 1 MO Class TreeThis section shows the full Managed Object Class tree with the names of classes. Rows are grouped into respective class levels for structured and convenient view. Use unfold (+) and fold (-) buttons in the left panel to browse the tree.
2.2 Parameter ListThis section shows the full parameter information including the following:- abbreviated names- managed objects- parent/child parameter relationships- default values- range and step- field descriptions- change information
2.2.1 Field descriptionsField descriptions are provided in the second row of Parameter List section. Use fold (-) and unfold (+) buttons on the left panel to respectively hide and show the field descriptions.
2.2.2 Change informationChange information is a part of Parameter List section and is available in the following ways:
1. Definition on whether the parameter is new, removed, changed, or has been moved to another location in the structure (for example, to another managed object class). That definition is provided in the following columns:
- Changes between issues ... which shows the changes since the previous issue of the document.- Changes between releases ... which shows the changes since the latest issue of the document in the previous product release.
If the cell is empty, the parameter is not changed, nor new, nor removed, nor moved.Note that removed parameters are listed in the very bottom and they are marked with red font.
Filters are enabled for convenient browsing of the change categories.
2. Detailed change information showing the current and previous values of parameter attributes. That information is provided in the following columns:
- <parameter attribute> in issue ... which shows the value in the previous issue of the document.- <parameter attribute> in release ... which shows value in the latest issue of the document in the previous product release.
The columns are grouped into attribute-specific sections for structured and convenient view. Use unfold (+) and fold (-) buttons in the top bar to browse the attribute-specific change details. Use unfold all (2) and fold all (1) buttons on the left hand side of the top bar to respectively show and hide the change details for the whole report.
Note that for all parameters except new and removed ones, the field values for previous issue and previous release are always provided to show total history information. Additionally, the changed attributes of parameters are highlighted with grey color. Highlights are enabled to specify whether there is a change between issues or releases.
1. IntroductionThe purpose of this document is to assist users in finding parameters, their meanings, specifications, and default values. The managed objects and parameters are listed in alphabetical order.
2. How to read this excel reportThe excel report provides a full information on the parameter dictionary. It shows the full set of parameter attributes including the change information.
The excel report consists of two main sections:- MO Class Tree- Parameter List
2. 1 MO Class TreeThis section shows the full Managed Object Class tree with the names of classes. Rows are grouped into respective class levels for structured and convenient view. Use unfold (+) and fold (-) buttons in the left panel to browse the tree.
2.2 Parameter ListThis section shows the full parameter information including the following:- abbreviated names- managed objects- parent/child parameter relationships- default values- range and step- field descriptions- change information
2.2.1 Field descriptionsField descriptions are provided in the second row of Parameter List section. Use fold (-) and unfold (+) buttons on the left panel to respectively hide and show the field descriptions.
2.2.2 Change informationChange information is a part of Parameter List section and is available in the following ways:
1. Definition on whether the parameter is new, removed, changed, or has been moved to another location in the structure (for example, to another managed object class). That definition is provided in the following columns:
- Changes between issues ... which shows the changes since the previous issue of the document.- Changes between releases ... which shows the changes since the latest issue of the document in the previous product release.
If the cell is empty, the parameter is not changed, nor new, nor removed, nor moved.Note that removed parameters are listed in the very bottom and they are marked with red font.
Filters are enabled for convenient browsing of the change categories.
2. Detailed change information showing the current and previous values of parameter attributes. That information is provided in the following columns:
- <parameter attribute> in issue ... which shows the value in the previous issue of the document.- <parameter attribute> in release ... which shows value in the latest issue of the document in the previous product release.
The columns are grouped into attribute-specific sections for structured and convenient view. Use unfold (+) and fold (-) buttons in the top bar to browse the attribute-specific change details. Use unfold all (2) and fold all (1) buttons on the left hand side of the top bar to respectively show and hide the change details for the whole report.
Note that for all parameters except new and removed ones, the field values for previous issue and previous release are always provided to show total history information. Additionally, the changed attributes of parameters are highlighted with grey color. Highlights are enabled to specify whether there is a change between issues or releases.
1. IntroductionThe purpose of this document is to assist users in finding parameters, their meanings, specifications, and default values. The managed objects and parameters are listed in alphabetical order.
2. How to read this excel reportThe excel report provides a full information on the parameter dictionary. It shows the full set of parameter attributes including the change information.
The excel report consists of two main sections:- MO Class Tree- Parameter List
2. 1 MO Class TreeThis section shows the full Managed Object Class tree with the names of classes. Rows are grouped into respective class levels for structured and convenient view. Use unfold (+) and fold (-) buttons in the left panel to browse the tree.
2.2 Parameter ListThis section shows the full parameter information including the following:- abbreviated names- managed objects- parent/child parameter relationships- default values- range and step- field descriptions- change information
2.2.1 Field descriptionsField descriptions are provided in the second row of Parameter List section. Use fold (-) and unfold (+) buttons on the left panel to respectively hide and show the field descriptions.
2.2.2 Change informationChange information is a part of Parameter List section and is available in the following ways:
1. Definition on whether the parameter is new, removed, changed, or has been moved to another location in the structure (for example, to another managed object class). That definition is provided in the following columns:
- Changes between issues ... which shows the changes since the previous issue of the document.- Changes between releases ... which shows the changes since the latest issue of the document in the previous product release.
If the cell is empty, the parameter is not changed, nor new, nor removed, nor moved.Note that removed parameters are listed in the very bottom and they are marked with red font.
Filters are enabled for convenient browsing of the change categories.
2. Detailed change information showing the current and previous values of parameter attributes. That information is provided in the following columns:
- <parameter attribute> in issue ... which shows the value in the previous issue of the document.- <parameter attribute> in release ... which shows value in the latest issue of the document in the previous product release.
The columns are grouped into attribute-specific sections for structured and convenient view. Use unfold (+) and fold (-) buttons in the top bar to browse the attribute-specific change details. Use unfold all (2) and fold all (1) buttons on the left hand side of the top bar to respectively show and hide the change details for the whole report.
Note that for all parameters except new and removed ones, the field values for previous issue and previous release are always provided to show total history information. Additionally, the changed attributes of parameters are highlighted with grey color. Highlights are enabled to specify whether there is a change between issues or releases.
1. IntroductionThe purpose of this document is to assist users in finding parameters, their meanings, specifications, and default values. The managed objects and parameters are listed in alphabetical order.
2. How to read this excel reportThe excel report provides a full information on the parameter dictionary. It shows the full set of parameter attributes including the change information.
The excel report consists of two main sections:- MO Class Tree- Parameter List
2. 1 MO Class TreeThis section shows the full Managed Object Class tree with the names of classes. Rows are grouped into respective class levels for structured and convenient view. Use unfold (+) and fold (-) buttons in the left panel to browse the tree.
2.2 Parameter ListThis section shows the full parameter information including the following:- abbreviated names- managed objects- parent/child parameter relationships- default values- range and step- field descriptions- change information
2.2.1 Field descriptionsField descriptions are provided in the second row of Parameter List section. Use fold (-) and unfold (+) buttons on the left panel to respectively hide and show the field descriptions.
2.2.2 Change informationChange information is a part of Parameter List section and is available in the following ways:
1. Definition on whether the parameter is new, removed, changed, or has been moved to another location in the structure (for example, to another managed object class). That definition is provided in the following columns:
- Changes between issues ... which shows the changes since the previous issue of the document.- Changes between releases ... which shows the changes since the latest issue of the document in the previous product release.
If the cell is empty, the parameter is not changed, nor new, nor removed, nor moved.Note that removed parameters are listed in the very bottom and they are marked with red font.
Filters are enabled for convenient browsing of the change categories.
2. Detailed change information showing the current and previous values of parameter attributes. That information is provided in the following columns:
- <parameter attribute> in issue ... which shows the value in the previous issue of the document.- <parameter attribute> in release ... which shows value in the latest issue of the document in the previous product release.
The columns are grouped into attribute-specific sections for structured and convenient view. Use unfold (+) and fold (-) buttons in the top bar to browse the attribute-specific change details. Use unfold all (2) and fold all (1) buttons on the left hand side of the top bar to respectively show and hide the change details for the whole report.
Note that for all parameters except new and removed ones, the field values for previous issue and previous release are always provided to show total history information. Additionally, the changed attributes of parameters are highlighted with grey color. Highlights are enabled to specify whether there is a change between issues or releases.
Managed Object Class Tree
MRBTS BBMODBTSSCL
LCELLLNBTS
ANRPRLANRPRWBTSSC
ANTLMHARET
CRGPRCTRLTS
MTRACEFTM
AMGR BTOOTHCERTHETHLKIPNO
BFDBFDGRPIDNSIEIF
IVIFIHCPINTPIPRMIPRTIPRTV6QOSTWAMP
IPSECC L2SWIOAMMD
OAMMA OAMMEP
OAMPRFPMTNLPOEPPTTSYNC
STPGTAC
LTACTOPB
TOPFTOPP
UNITWIFICNF
GTPULNADJ
LNADJLLNADJG
LNADJWLNADJXLNCEL
AMLEPRCARELCDFIMGFIM
GNFLIAFIMIRFIMISHPRLNHOGLNHOHLNHOIFLNHOWLNHOXLNNEIHLNRELLNRELGLNRELWLNRELXREDRTUFFIMXPARAM
LNHENBLNMMEMFBIPRMODPR
MODIMPMODRED
MOPR MOIMPMORED
PMRNLSCTPULCOMP
MHAPMCADMRETRMODSMOD TEST
RFRSTRFTHLD
TRBLCADM
Managed Object Class Name
Multiradio BTS Site Baseband Module LTE BTS radio specific configuration Local Cell LTE LTE Basestation RNW parameters Automatic Neighbor Relationship Profile LTE Automatic Neighbor Relationship Profile WCDMA BTS Site commissioning parameters Antenna Line parameters Mast Head Amplifier Remote Electrical Tilt Cell Resource Group Profile Trace Control Cell Trace Session Flexi transport module Account Manager Bluetooth Manager Certificate Handler Ethernet link interface IP Node Configuration BFD session Bidirectional Forwarding Detection Group DNS Access Plain Ethernet network interface VLAN interface DHCP access NTP Server Configuration Restricted mode configuration IP Routing Tables IPv6 Routing Tables Quality of Service configuration TWAMP session IPsec configuration Layer 2 Switch Maintenance Domain Maintenance Association Maintenance Association End Point Link OAM Profile Transport Performance Management Measurement Administration Power over Ethernet PDH physical section trail termination point Clock Synchronization Synchronization Protection Group Transport admission control Transport admission control for LTE ToP base MO ToP freq sync ToP Phase Sync Hardware Unit Integrated WiFi Configuration GPRS Tunnel Protocol User Plane parameters Neighbouring LTE BTS Neighbouring LTE BTS Cell Neighbouring GERAN BTS Cell
Neighbouring WCDMA BTS Cell Neighbouring CDMA 1xRTT BTS Cell LTE BTS CELL RNW parameters Active Mode Load Equalization Profile Carrier Aggregation Relation CDMA2000 frequency Idle Mode parameters GERAN frequency Idle Mode parameters GERAN Neighbour Frequency List parameters Intra frequency Idle Mode parameters Inter frequency Idle Mode parameters Downlink Interference Shaping Profile Handover parameters to Neigbouring GERAN BTS Cell LN Handover to HRPD Handover parameters to Neigbouring Interfrequency LTE Cell Handover parameters to Neigbouring WCDMA BTS Cell Handover parameters to Neigbouring CDMA2000 1xRTT Cell LN Neighbourship to HRPD Cell LTE Neighbor Relation LTE Neighbor Relation to GERAN LTE Neighbor Relation to UTRAN LTE Neighbor Relation to CDMA2000 1xRTT Redirection target parameters Utran FDD frequency Idle Mode parameters CDMA2000 1xXRTT Parameter Home eNB Set LTE Mobility Management Entity Multiple Frequency Band Indicator Profile Mobility Default Profile Mobility Idle Mode Default Profile Mobility Default profile for Redirection Mobility Profile Mobility Idle Mode Profile Mobility Profile for Redirection PM counters configuration for radio network layer Stream Control Transmission Protocol parameters Uplink coordinated multipoint set Mast Head Amplifier Performance Measurement Common Administration Remote Electrical Tilt Radio Module System Module Test RF Test Result RF Test Threshold Troubleshooting Common Administration
Abbreviated Name
Changed actUlLnkAdp
Note:See the How to Read This Report tabfor instructions on the usage of Parameter List
Changes between issues 03DRAFT and 03A
Changes between releases RL60 and RL70
MO Class Parameter Category
LNCEL • Basic parameters
Parent Structure Child Parameters
Full Name 3GPP Name Data Type
Activate uplink link adaptation Enumeration
Multiplicity Description
1 Activates Uplink Link Adaptation and defines Link Adaptation modeWhen set to "off" no Uplink link Adaptation function is active at all.When set to "eUlLa" the extended Uplink Link Adaptation function is activated.When set to "fUlLa" the new Fast Uplink Link Adaptation function is activated.The other choice "slowAmcOllaATB" allows to set to active all the 3 old components of the UL LA function as it was up to RL20.
Range and step Formula for Getting Internal Value Default Value
eUlLa (5)off (0), slowAmcOllaATB (4), eUlLa (5), fUlLa (6)
gui ==> internaloff ==> 0slowAmcOllaATB ==> 4eUlLa ==> 5fUlLa ==> 6
Default Value Notes Related Functions
eUlLa Radio Link Quality Control
Modification Required on Creation
On-line Mandatory
Related Parameters Related Features
deltaTfEnabled of LNCEL - deltaTfEnabled must be configured to 'false' if actUlLnkAdp is set to 'eUlLa' or 'fUlLa'srsPwrOffset of LNCEL - srsPwrOffset must be configured if actUlLnkAdp is set to 'fUlLa' (precondition: ulsSchedMethod is set to ('interference aware' or 'channel unaware') AND srsConfiguration is defined)tPeriodicPhr of LNCEL - tPeriodicPhr cannot be configured to 'infinity' if actUlLnkAdp is set to 'fUlLa' (precondition: ulsSchedMethod is set to ('interference aware' or 'channel unaware'))eUlLaAtbPeriod of LNCEL - eUlLaAtbPeriod must be configured if actUlLnkAdp is set to 'eUlLa'eUlLaBlerAveWin of LNCEL - eUlLaBlerAveWin must be configured if actUlLnkAdp is set to 'eUlLa'eUlLaDeltaMcs of LNCEL - eUlLaDeltaMcs must be configured if actUlLnkAdp is set to 'eUlLa'eUlLaLowMcsThr of LNCEL - eUlLaLowMcsThr must be configured if actUlLnkAdp is set to 'eUlLa' OR (if actUlLnkAdp is set to 'fUlLa' AND actTtiBundling is set to 'true')eUlLaLowPrbThr of LNCEL - eUlLaLowPrbThr must be configured if actUlLnkAdp is set to 'eUlLa' OR (if actUlLnkAdp is set to 'fUlLa' AND actTtiBundling is set to 'true')eUlLaPrbIncDecFactor of LNCEL - eUlLaPrbIncDecFactor must be configured if actUlLnkAdp is set to 'eUlLa'actTtiBundling of LNCEL - actTtiBundling can only be configured to 'true' if actUlLnkAdp is set to 'eUlLa' or 'fUlLa'redBwMinRbUl of LNCEL - redBwMinRbUl is restricted by eUlLaLowPrbThr if actUlLnkAdp is set to 'eUlLa'fUlLAAtbTrigThr of LNCEL - fUlLAAtbTrigThr must be configured if actUlLnkAdp is set to 'fUlLa'actEicic of LNCEL - if actEicic is set to 'true', actUlLnkAdp must be configured to 'eUlLa' or 'fUlLa'
• LTE1034 Extended Uplink Link Adaptation (standard)• LTE907 TTI bundling (optional)• LTE1495 Fast uplink link adaptation (standard)• LTE944 PUSCH masking (standard)• LTE1113 eICIC - macro (standard)• LTE1496 eICIC - micro (standard)
Interfaces
• LTE BTS <-> EM• LTE BTS <-> RAC• RACApp <-> RAC
References
