SIGMASWITCHES PLUS

4703 Wyland Drive • Elkhart • IN • 46516 • 574-294-5776 • Fax 574-294-8744

www.sigmaswitches.com

ORDER DESK TOLL FREE(800) 488-9505

Series 201

201 Series (201B-18 shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm)

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPST on/off “- O” Print201B-18-250SSPST on/off “On Off” Print201B-18-315SSPST on/off201B-56

SPST on/off201B-18

SIGMASwitches Plus

201B = SPST on/off

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201C shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPDT on/on201C-26

SIGMASwitches Plus

201C = SPDT on/on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201D shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

3.4 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPDT on/off/on “HI OFF LOW” Print201D-27-146SSPDT on/off/on201D-27

SIGMASwitches Plus

201D = SPDT on/off/on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201E shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPDT on/on201E-53DPDT on/on201E-86

DPDT on/on201E-26

SIGMASwitches Plus

201E = DPDT on/on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201F shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

3.4 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPDT mom-on/off/mom-on201F-22SPDT mom-on/off/mom-on201F-89SPDT mom-on/off/mom-on201F-93

SPDT mom-on/off/mom-on201F-12

SIGMASwitches Plus

201F = SPDT mom-on/off/mom-on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201G-11 shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPST mom-on/off201G-11

SIGMASwitches Plus

201G = SPST mom-on/off

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201H shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPST on/on “- O” Print201H-250SDPST on/on “On Off” Print201H-315S

DPST on/off201H-28

SIGMASwitches Plus

201H = DPST on/off

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201I shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPST mom-on/off201I-15

SIGMASwitches Plus

201I = DPST mom-on/off

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201J shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPDT on/mom-on201J-15

SIGMASwitches Plus

201J = DPDT on/mom-on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201K shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPST on/mom-off201K-15

SIGMASwitches Plus

201K = DPST on/mom-off

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201L shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPST on/mom-off201L-15

SIGMASwitches Plus

201L = SPST on/mom-off

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201N shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

3.4 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPDT on/off/mom-on201N-15

SIGMASwitches Plus

201N = SPDT on/off/mom-on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201P shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

3.4 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPDT on/off/on “I O II” Print201P-61-418SDPDT on/off/on201P-36DPDT on/off/on201P-36-379B “I O ” Print

DPDT on/off/on201P-61

SIGMASwitches Plus

201P = DPDT on/off/on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201Q shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

5.5 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

SPDT on/mom-on201Q-26

SIGMASwitches Plus

201Q = SPDT on/mom-on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201R shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

3.4 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPDT on/off/mom-on201R-15

SIGMASwitches Plus

201R = DPDT on/off/mom-on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You

201 Series (201S shown for reference only)

SIGMA ELKHART, IN

BOTTOM VIEW

3 2 1

19.4

3.4 Ref.

11

.8

2

9

6.35 (.250)

22 ±.3

30 +.7-.0

18

22.5

31.2 ±.2

25 ±.2

28.6 ±.3

3

2

1

6

5

4

NOTE: CUTOUT SIZE isfor REFERENCE ONLY and may vary depending on thethickness of material used.

AMPS VOLTAGEElectrical Rating*

* All ratings based on load per pole, opposite polarity.

20A 125VAC15A 250VAC40A Peak / 20A Continuous 12 VDC Factory Rating

TerminationStandard is solderless .250” wide x .032“ thick(6.35 mm x .81 mm).

.187” (4.75 mm) terminals are also available.

Acceptable panel thickness range is from .039”(1.0 mm) to .118” (3.0 mm)

CAUTION! Burr direction must be awayfrom the direction of insertion.

No hardware or tools needed, self locks intoproper panel cutout .886” x 1.181 (22.5 mm x30.0 mm).

NOTE: CUTOUT SIZE is for REFERENCE ONLY andmay vary depending on the thickness of material used.

Mounting

Custom colors and printing upon request.

Features•

••••

Easy to terminate with solderless connectors.Snap-in and self-locking panel mount

Active switch elements enclosed and protected.

Metal plunger withstands high temperature.Optional clear boot fits all 201 series switches•

DPDT mom-on/off/mom-on201S-18DPDT mom-on/off/mom-on201S-36DPDT mom-on/off/mom-on201S-58

DPDT mom-on/off/mom-on201S-15

SIGMASwitches Plus

201S = DPDT mom-on/off/mom-on

201 Series

ORDER / HELP Desk... Call Toll Free 800-488-9505!

www.sigmaswitches.com

4703 Wyland Dr. Elkhart IN 46516 574-294-5776 Fax 574-294-8744

Switch Selection ChartSwitch Selection Chart

Bla

ck

Whi

teR

edB

lue

Gre

enA

mbe

rB

row

nIv

orySpecial

MarkingsCircuitPart No.

ApprovalsUL, CUL, RoHS compliant

We are constantly adding-to and improving our selection of Rocker, Toggle, Push Buttonand other types of switches. If you do not find what you need here, or on other pages ofour web site, please do not hesitate to contact us. If your need is custom, we would liketo discuss your unique design requirements as well.

Thank you for giving us the opportunity to fulfill Your switching needs!

Our Committment to You