Date post: | 09-Mar-2016 |
Category: |
Documents |
Upload: | rohn-products-llc |
View: | 234 times |
Download: | 3 times |
T T E L E S C O P I N G M A S T S
T E L E S C O P I N G M A S T SF O R U S E I N G U Y E D O R B R A C K E T E D I N S T A L L A T I O N S
ROHN Telescoping Masts are available in 20’, 30’, 33‘, 40’ and 50’ nominal heights. All are pre-galvanized for corrosionprotection and come assembled with hardware.
Specifications:All installations must be guyed or bracketed. Installationof masts should be done by experienced professionals.
Telescoping Masts are not recommended for commercial, CB or beam antenna installations.
Part No.H20H30H40H50
9H50*
Wt.17 lbs.27 lbs.36 lbs.46 lbs.34 lbs.
O.D. Bottom1 1/2”1 3/4”
2”2 1/4”2 1/4”
O.D. Top1 1/4”1 1/4”1 1/4”1 1/4”1 1/4”
Shipping Length123”123”123”123”99”
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard© 2011 ROHN PRODUCTS LLC
244
*9H50 is UPS shippable.
Note:Guys, guy hardware, anchors and base mountmust be ordered separately. Refer to pages 245-248 for standard kits and page 249 forindividual components.
T E L E S C O P I N G M A S T S T
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard© 2011 ROHN PRODUCTS LLC
245
T E L E S C O P I N G M A S T SH 2 0 | H 3 0 | H 4 0 | H 5 0 | 9 H 5 0
H20 H30 H50 9H50
NEW
PRODUCT9H50UPS Shippable!
Top rings are adjustable based on antennamounting.
114”
231”
108”
223”
336”
102”
211”
435”
322”
96”
199”
415”
304”
527”
72”
152”
410”
233”
320”
H40
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
T T E L E S C O P I N G M A S T S
246© 2011 ROHN PRODUCTS LLC
I N S T A L L A T I O N G U I D E L I N E S
18’ TYP 90 TYPº
18’ TYP
120 TYPº
29’ TYP
23’ TYP
29’ TYP
23’ TYP
TOP VIEW ELEVATION VIEW TOP VIEW ELEVATION VIEW
H203WAYGUY
Actual Wire Required - 200’
H204WAYGUY
Actual Wire Required - 250’
3 Guy Wire Setup 4 Guy Wire Setup
27’ TYP 90 TYPº
27’ TYP
120 TYPº
31’ TYP
TOP VIEW ELEVATION VIEW TOP VIEW ELEVATION VIEW
H303WAYGUY
Actual Wire Required - 350’
H304WAYGUY
Actual Wire Required - 450’
3 Guy Wire Setup 4 Guy Wire Setup
H30
GU
Y K
IT 35’ TYP
41’ TYP
31’ TYP
35’ TYP
41’ TYP
H20
GU
Y K
IT
All Telescoping Mast kits include guys, connection hardware, anchors and ground mount.Mast must be ordered separately.
18’ 18’
27’27’
1 618 1000’ - 6 Strand/18 GA Wire
3 GAS4303 1/2” x 30” Screw Anchor
12 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
1 618 1000’ - 6 Strand/18 GA Wire
4 GAS4303 1/2” x 30” Screw Anchor
16 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
1 618 1000’ - 6 Strand/18 GA Wire
3 GAS4303 1/2” x 30” Screw Anchor
18 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
1 618 1000’ - 6 Strand/18 GA Wire
4 GAS4303 1/2” x 30” Screw Anchor
24 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
T E L E S C O P I N G M A S T S
247© 2011 ROHN PRODUCTS LLC
TI N S T A L L A T I O N G U I D E L I N E S
36’ TYP 90 TYPº
36’ TYP
120 TYPº
39’ TYP
TOP VIEW ELEVATION VIEW TOP VIEW ELEVATION VIEW
3 Guy Wire Setup 4 Guy Wire Setup
H40
GU
Y K
IT
43.5’ TYP 90 TYPº
43.5’ TYP
120 TYPº
47’ TYP
TOP VIEW ELEVATION VIEW TOP VIEW ELEVATION VIEW
3 Guy Wire Setup 4 Guy Wire Setup
64’ TYP
43’ TYP
47’ TYP
54’ TYP
39’ TYP
43’ TYP
47’ TYP
54’ TYP
49’ TYP
53’ TYP
58’ TYP
47’ TYP
64’ TYP
49’ TYP
53’ TYP
58’ TYP
H50
GU
Y K
IT
H503WAYGUY
Actual Wire Required - 850’
H504WAYGUY
Actual Wire Required - 1100’
H403WAYGUY
Actual Wire Required - 550’
H404WAYGUY
Actual Wire Required - 750’
All Telescoping Mast kits include guys, connection hardware, anchors and ground mount.Mast must be ordered separately.
36’36’
43.5’43.5’
1 618 1000’ - 6 Strand/18 GA Wire
3 GAS4303 1/2” x 30” Screw Anchor
24 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
1 618 1000’ - 6 Strand/18 GA Wire
4 GAS4303 1/2” x 30” Screw Anchor
32 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
1 618 1000’ - 6 Strand/18 GA Wire
3 GAS604 5/8” x 48” Screw Anchor
30 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
2 618 1000’ - 6 Strand/18 GA Wire
4 GAS604 5/8” x 48” Screw Anchor
40 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
I N S T A L L A T I O N G U I D E L I N E S9H
50 G
UY
KIT
9H503WAYGUY
Actual Wire Required - 650’
9H504WAYGUY
Actual Wire Required - 850’
All Telescoping Mast kits include guys, connection hardware, anchors and ground mount.Mast must be ordered separately.
1 618 1000’ - 6 Strand/18 GA Wire
3 GAS604 5/8” x 48” Screw Anchor
30 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
1 618 1000’ - 6 Strand/18 GA Wire
4 GAS604 5/8” x 48” Screw Anchor
40 61820GRPL 618/620 Gripple
1 GTMBL Ground Mount
I N S T A L L A T I O N G U I D E L I N E S1. Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.2. All installations must be bracketed or guyed. 3. The pictured guy layouts are for a typical installation. Individual installation requirements may vary.4. Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
33.5’ TYP 90 TYPº
33.5’ TYP
120 TYPº
36’ TYP
TOP VIEW ELEVATION VIEW TOP VIEW ELEVATION VIEW
3 Guy Wire Setup 4 Guy Wire Setup
50’ TYP
38’ TYP
41’ TYP
45’ TYP
36’ TYP
50’ TYP
38’ TYP
41’ TYP
45’ TYP
33.5’”33.5’
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
T T E L E S C O P I N G M A S T S
248© 2011 ROHN PRODUCTS LLC
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
T E L E S C O P I N G M A S T S
249© 2011 ROHN PRODUCTS LLC
TP A R T S & A C C E S S O R I E S
UNIVERSAL RIDGE MOUNTCompletely assembled for
quick and easy flat or peaked roof installation. Allows tall masts to be swung up along the ridge of
a roof.
Part No. Description UM20 Holds masts to 1 1/2” O.D. UM30 Holds masts to 1 3/4” O.D. UM40 Holds masts to 2” O.D.UM50 Holds masts to 2 1/4” O.D.
GROUND MOUNTSturdy, galvanized, drive-in type mount for all ROHN telescoping masts, 1 1/4” tubing and 1 1/2”
tubing.
Part No. Description GTMBL Ground Mount
UNIVERSAL ROOF MOUNTFeatures galvanized finish
and heavy duty steel throughout. Completely assembled. Holds allROHN telescoping masts, 1 1/4”
tubing and 1 1/2” tubing.
Part No. Description ETMB Universal Mount
GALVANIZED GUYSNon-tangling interconnectedcoils. Packaged 1000’ per box.
Part No. Description 618 6 strand, 18 GA
SCREW ANCHORSHot-dip galvanized screw anchor.
Part No. Description GAS4303 1/2” dia. x 30“ long with 4” augerGAS604 5/8” dia. x 48“ long with 6” auger
GUY CONNECTIONSUse for easy installation of 6 strand,
18 GA guys.
Part No. Description 61820GRPL Gripple Grip
Not to be used to suspend or lift personnel.
Refer to page 251 for roof mounts. Refer to page 275 for wall mounts.
Roof mounting hardware not included. Roof mounting hardware not included.