ROLLFEED CUTTER FC8600 SERIES - Regional Supply · 2018. 10. 1. · Programmable Cutting Force 20...

Since 1946

CE LITE 50

AUTOMATIC SHEET CUTTER

CE6000 PLUS SERIES

FC8600 SERIES

RO

LLFE

ED C

UTT

ER ULTIMATE CUTTING PERFORMANCE

Cutting Master 4Cutting Master 4 Cutting Master 3Cutting Master 3

Cutting Master 2Cutting Master 2

Graphtec Pro StudioGraphtec Pro Studio Graphtec Pro Studio PlusGraphtec Pro Studio Plus

Graphtec StudioGraphtec Studio













SOFTWARE

HIGH PERFORMANCE

ARMS 5.0Graphtec’s renowned Advanced Registration Mark Sensing system produces high precision print & cut results - even on challenging materials such as high gloss and high intensity reflective.

PERF / DIE CUTEfficiently perf cut pre-printed decals with preset tool settings and cutting channel. This method prevents damage to your blade and cutting plotter.

EXPANDED AREA CUTTINGGraphtec utilizes media more efficiently than the competition. Smaller side margins and the ability to cut printed objects outside of the registration marks yields up to 30% higher output.

24 in x 164 ft 30 in x 164 ft 42 in x 164 ft 54 in x 164 ft 64 in x 164 ft Max. Cutting Area

2 in to 30.3 in 2 in to 36.2 in 2 in to 48.2 in 2 in to 60.2 in 2 in to 72.5 inCompatible Media Widths

44 x 28 x 48 in 50 x 28 x 48 in 61.8 x 28 x 48 in 73.6 x 28 x 48 in 84 x 28 x 48 inUnit Dimensions with Stand

No. of Push Rollers 2 rollers 2 rollers 3 rollers 3 rollers 4 rollers

FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160

24”30”

42”54” 64”

Specifications For more information and tutorials visit www.graphtecamerica.com

Max. Media Thickness 59.1 mil (1.48 mm)

Max. Cut Speed 58.5 in/s (1485 mm/s)diagonal

Programmable Cutting Force 20 gf - 600 gf in 48 steps

Sheet Cutter Max. Thickness 11 mil including media release liner (backing)

Programmable Resolution GP-GLTM: 0.1/.05/.025/.01 mm; HP-GL®: 0.001 in (0.025 mm); HP-GLTM: 254, 508, 1016, 2540; HP-GL®: 1016

Compatible Media Types(1) Self-adhesive vinyl film, diamond grade, fluorescent film, reflective film, AmberlithTM, RubylithTM, Sandblast resist rubber, high-intensity reflective film, prismatic reflective sheeting, window tint film, paint protection film, automotive paint protection film, etc.

(1) Additional (optional) push rollers may be required.

Ethernet, USB 2.0 high-speed, Serial RS-232C

5th Gen. Advanced Registration Mark Sensing System

3” graphic LCD w/comprehensive icon-corresponding soft keys

Blade: CB09UBBlade-holder: PHP33-CB09N-HSWater-based fiber tip pen: KF700-BKFiber pen adapter: PHP31-FiberPower cable & USB cable, Software: Cutting Master 4 for Ai (Mac&Win) for CorelDraw (Win)

Graphtec Studio (Mac), Graphtec Pro Studio (Win)

3-Yr parts & labor warranty

Interface

ARMS

Display Panel

Standard Accessories(included)

Warranty

Compatible OS Win 10/8.1/8/7 Mac 10.7-10.13.3

GP-GLTM, HP-GL® (selectable in command menu or auto detection)Command Modes

FC8600 SERIESA

DV

AN

CED

LEV

EL

ISM (INTELLIGENT SENSING MODE)ISM utilizes an advanced scanning algorithm that accurately cuts graphics printed on high intensity reflective, ultra-gloss, and textured media.

ISM (Intelligent Sensing Mode)

ARMS 5.0Graphtec’s renowned Advanced Registration Mark Sensing system produces high precision print & cut results. Easily produce copies directly from the cutter using the copy button.

INTUITIVE OPERATIONThe large 3.7” LCD screen makes navigation simple for all users. Set up to 16 preset cutting conditions for your most commonly used materials - giving you the perfect cut every time.

EXPANDED AREA CUTTINGGraphtec utilizes media more efficiently than the competition. Smaller side margins andthe ability to cut printed objects outside of the registration marks yields up to 30% higher output.

PROFESSIONAL

14.76 in X 164 ft 23.7 in x 164 ft 47.8 in x 164 ftMax. Cutting Area

2 in to 19 in 2 in to 28 in 2 in to 53 in Compatible Media Widths

26.5 x 13.3 x 10.5 in 35.4 x 23.3 x 41 in 60.7 x 29 x 49.2 inUnit Dimensions

Max. Cutting Speed 24 in/s (600 mm/s)in all directions

CE6000-40 PLUS CE6000-60 PLUS CE6000-120 PLUS

35 in/s (900 mm/s)at 45˚ direction

40 in/s (1000 mm/s)at 45˚ direction

15”

24” 48”


Max. Media Thickness 25 mil (.63 mm)

Programmable Cutting Force 20 gf - 450 gf in 38 steps

Cut Thru Media and Backing CE6000-60, CE6000-120 when using cutting mat/carrier sheet only(1)

CE6000-40 now includes perf / die cut

Programmable Resolution GP-GLTM: 0.1, 0.025, 0.05, 0.1 mm; HP-GLTM: 0.001 in (0.025 mm)

Compatible Media Types Self-adhesive vinyl film, light reflective film (except high-luminosity), AmberlithTM, RubylithTM, etching resist, paint masking film, rhinestone pattern media, heat transfer vinyls: flex, flock, image transfer media, vinyl print media, card stock up to 10pt (220 g/m2)(1)

Interface USB 2.0 high-speed | Serial RS-232C

ARMS 5th Gen. Advanced Registration Mark Sensing System

Command Modes GP-GLTM, HP-GL® (selectable in command menu or auto detection)

Display Panel 3.7” Graphic LCD w/backlight (240 x 128 dots) supports 10 languages


Blade: CB09UBBlade-holder: PHP33-CB09N-HSWater-based fiber tip pen: KF700-BKPower cable & USB cable, Stand (60& 120 models only)

Software: Cutting Master 4 for Ai (Mac&Win) for CorelDraw (Win)

Graphtec Studio (Mac), Graphtec Pro Studio (Win)

Warranty 2-Yr parts & labor warranty

Compatible OS Win 10/8.1/8/7 Mac 10.7-10.13.3

Cutting Graphtec rhinestone stencil material GRS1510-m

(1) Must use cutting mat/carrier sheet for any/all cut thru (media and backing) applications.

(perf / die cut - efficiently perf cut pre-printed decals with preset tool settings and cutting channel. This method prevents damage to your blade and cutting plotter.)

CE6000 PLUS SERIES

INTE

RM

EDIA

TELE

VEL

Conventional Cutting Plotter

Graphtec Extended Area Cutting

Expanded Area Cutting

ARMS 7.0ARMS 7.0 technology ensures efficient, high precision print and cut jobs. CE Lite-50 detects registration marks on the media to accurately align the position of the cutting line to the printed image on various materials including glitter and metallic.

CONTINUOUSLY CUT ROLL MEDIAMax. guaranteed cutting media width up to 20”,roll media up to 118” long using the roll media stocker.

(1) When operated with Graphtec specified media and conditions. (the roll media stocker is used for long media). (2) It requires the pen plunger for CE Lite-50 (optional). The diameter range of available water-based felt-tipped pen: 6.4 -10.1 mm. There are 3-types of pen adapter to match the width of water-based felt-tipped pen. *There are cases where the pen is not available depending on the width. (3) Win & Mac software available at www.graphtecamerica.com or contact local dealer near you.

USB OFFLINE OPERATIONUSB offline barcoding automatically loads saved cut data, sets tool conditions, and processes the job at the push of a button - without requiring a PC connection.

Create the design Print Cut Completed1 2 3 4


Mountable Media Width Max. 18.81” Min. 8.26”

Mountable Roll Media Type ■ Diameter ■ Weight

2” paper tube: Max. dia 5.9”, Min. dia 2.07”3” paper tube: Max. dia 5.9”, Min. dia 3.07”Max. weight 5.51 lbs

Warranty 1-Yr parts & labor warranty

Compatible OS(3)

Max. Cutting Force 210 gf

Blade Type / Pen Type Super steel Blade / Available with pen adapter(2)

Media Type Up to 4 mil (0.1 mm) thick self-adhesive filmUp to 40mil (1mm) thick using optional PM-BS-002 blade

Power Source

Display Panel

Interface USB 2.0

Win 10/8.1/8/7 Mac 10.6-10.13.3

100-240 V AC, adapter output 24 V DC (2A)

4.3” Touch screen display


Standard/Long Blade, carrier sheet: W 13” (330 mm), separate cutter: manually cutting from sheets and rolls, roll media stocker, USB cable 59” long, setup & safety manual (10 languages) Software(3): Cutting Master 4, Graphtec Pro Studio, Graphtec Studio (for Mac)

Storage Device USB memory ext. input

Weight Approx. 17.64 lbs (8 kg) without roll media stocker

CE LITE-50

USER-FRIENDLY TOUCHSCREEN

4.3” DISPLAY

CUT UP TO9 FT 10 INLONG ROLL

Max. Cutting Area

Unit Dimensions

Max. Cutting Speed 19.7 in/s in all direction

CE LITE-50

13 x 19 in (with carrier sheet)20 x 118 in (without carrier sheet)

30.87 x 8.94 x 6.46 inbody only, without roll media stocker

Compatible Media Width

8.2 in to 20 in

ENTR

YLE

VEL

HOME-BASED BUSINESS & ADVANCED CRAFTING

CCD Camera

Catch Tray

AutoFeeder Unit

2

Loaded sheets are automatically placed into the Graphtec machine

to contour / perforation cut.

1

Print sheets from your small format printer.

3

Produce small and medium size runs of: labels, business cards, heat transfer apparel & more.

Contour & Perforated Cut

Add sheets w/o Resending Job

Perfect SheetAlignment

Handle Up To200 Sheets

Precision iMark Technology

Avg. 30-40 Sec Per Sheet

Custom ASC Software

Precision Grade of 0.2 mm

custom apparel ᛫ heat transfer business card ᛫ pop ᛫ paper decoration

Cutter Unit (CE6000-40 Plus)


Supported Media Size Min. 8.5” to 11”, Max. 13” to 19”

Interface USB 2.0 high-speed

Power Source 100 to 240 V AC (requires 3-power outlets) Approx. 60 VA at output power

Dimensions When the entire system is placed on a table- Size of portion above desk Approx. W 26.4” x D 32.2” x H 10.4”- Size of portion below desk Approx. W 26.4” x D 14.9” x H 16.5”* The CE6000-40 Plus is placed on the edge of the table.

Weight Approx. 55 / cutter 24 lbs, auto feed 22 lbs, catch tray 8 lbs

Whole System (Auto sheet feeder unit with cutter unit)

Capacity of Supply Tray

Up to 200 sheets or up to 35 mm height(varies by the material, thickness and condition of media)

Main body: cNus mark, CE mark, FCCAC adapter: UL, cUL, CE mark, RoHS Directive, FCC, PSE, CCC

Digital Cutting SoftwareSupported OS Windows 10, 8.1, 8, 7

Required Software Adobe Illustrator or CorelDraw

Included Software iMark

Cutting Speed Max. 24”/sec (600mm/sec) all directions

Acceleration Max. 21.2 m/s2 (2.2 G) at 45˚ direction

Cutting Force Max. 450 gf with CE6000-40 Plus

Warranty 2-Yr Parts & labor warranty

Compatible Standards

AUTOMATIC SHEET CUTTER

FC8600 SERIESBlade CB09UB, CB09UB-K60, CB15U, CB15U-K30, CB15UA,

CB15U-K20-2SP, CB15UA-K30, CT01H, CT02U

Blade-Holder PHP31-Fiber, PHP33-CB09N-HS, PHP33-CB15N-HS, PHP34-BALL, PHP35-CB09-HS, PHP35-CB15-HS, PHP35-CB15N-HS

ECK0009 for dual tool configuration (dealer option)2nd Pen Holder

OPH-A21, flange for media holdingFlange

OPH-A22Push Roller

Water-Based Fiber-Tip Pen

KF700-BK (black), KF700-RD (red), KF700-BL (blue)

Pen Holder PHP31-Fiber for KF700 Pen

Pouncing Tool PPA33-TP12, steel pin 1.2 mm dia.

Oil-Based Ballpoint Pen

KB700-BK (black)

Pen Holder PHP34-Ball for KB700 Pen

CE6000 PLUS SERIES, AUTOMATIC SHEET CUTTERBlade CB09UB, CB09UB-K60, CB15U, CB15UA, CB15UA-K30

Blade-Holder PHP31-Fiber, PHP33-CB09N-HS, PHP33-CB15N-HS, PHP34-BALL, PHP35-CB09-HS, PHP35-CB15-HS, PHP35-CB15N-HS

PM-CT-001, for checking length and quality of blade tipLoupe

Water-Based Fiber-Tip Pen

KF700-BK (black)

ST0100 for CE6000-60, PG0100 for CE6000-60,PG0101 for CE6000-120

Media-CatchBasket

Pen Holder PHP31-Fiber for KF700 PenOil-Based Ballpoint Pen

KB700-BK (black)

Pen Holder PHP34-Ball for KB700 Pen

CE LITE-50Blade PM-BS-001, PM-BS-002

Pen Adapter PM-BH-001, dia. 6.4 - 10.1 mm

Carrier Sheet PM-CM-003, PM-CM-004

Cutting Mat PM-CR-001

Separate Cutter PM-CC-001, for manually cutting from sheets and rolls

17462 Armstrong Ave. Irvine, CA 92614 949.770.6010 Toll-free 800.854.8385

FOR SAFE OPERATION OF EQUIPMENT

• Before use, please read the user manual and operate properly in accordance with the description.• To avoid malfunction or an electric shock by current leakage or voltage, please ensure a ground connection and use according to the specification.

• Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.• Items mentioned are subject to change without notice. For more information about product, please check the website or contact your local representative.

*1 When operated with Graphtec specified media and conditions. (the roll media stocker is used for long media )*2 It requires the pen plunger for CE LITE-50 (Optional). The diameter range of available water based felt-tipped pen ：6.4 mm - 10.1 mm There are 3 types of pen adapter to match the width of water based felt-tipped pen. * There are cases where the pen is not available depends on the width.*3 For more information about Windows and Macintosh compatibility, please check the website or contact your local representative of Graphtec.*4 The software can be used by downloading from Graphtec website.

■ Deformation, shadow, and stripe of texts and shapes ■ Spell Check ■ Vectoring ■ Filter for bitmap image ■ Serialized number, Bar-code ■ Power Nest (Nesting) ■ Cutting simulation (Changing cutting order) ■ Output by layer or color ■ Add weeding lines / borders ■ Intelligent Nesting

< Major Features >

Cutting Master 4 is a plug-in software for Adobe Illustrator and CorelDRAW Graphics Suite. Send cutting data to the plotter, view cut preview, add registration marks, edit tool conditions / job settings and more. This easy to use plug-in enables you to get the best performance from your plotter.

Cutting Master 4Adobe Illustrator and CoreIDRAW plug-in software

Windows 10/8.1/8/ 7 | Mac OS X 10.7 - macOS 10.12 (Sierra)Adobe Illustrator CC2017/CC2015.3/CC2015/CC2014/CC/CS6/CS5/CS4*2CorelDRAW Graphics Suite 2017/X8/X7/X6/X5/X4

Start cutting immediately with enhanced software.

Easy-to-use application software for creating original designs. Includes enhanced functions such as auto-shapes, shading, and editing functions. It can also con�gure the cutting conditions and other settings on the plotter. EPS / Ai*3 / CMX*3 / PDF*3 �le compatibility allows users to import pre-existing designs.

Graphtec Pro Studio / Graphtec StudioGraphic Design Software

Graphtec Pro Studio for Windows 10/8.1/8/7Graphtec Studio for Mac OS X 10.6 - macOS 10.12 (Sierra)

Graphtec Pro Studio Plus

Windows 10/8.1/8/ 7

This optional software possesses advanced functions for optimal productivity and advanced designing. Functions include: Transformation of characters and graphics, bar code creation, nesting, cutting direction / order change plus more.

Optional ｜ Advanced graphic design software

*1 For more information regarding OS compatibility or application software, please check the Graphtec website or contact your local representative of Graphtec. *2 Adobe Illustrator CS 4 is supported with Windows OS only. *3 Available in Graphtec Pro Studio.

■ Intelligent Nesting ■ Rhinestone layout ■ Cutting simulation (Changing cutting order)

For users requiring advanced design functions and cutting control.

Speci�cationsItem CE LITE-50Maximum cutting area (W x L)(*1) 508 mm x 3 m (with carrier sheet : 508 mm × 707 mm)Cutting area of guaranteed accuracy (W x L)(*1) 508 mm x 1 mMountable media width Max. 508 mm　Min. 210 mm (A4 portrait orientation)Mountable roll diameter 2 inch paper tube : Max. diameter 150 mm, Min. diameter 52.8 mmmedia type 3 inch paper tube : Max. diameter 150 mm, Min. diameter 78.2 mm weight Max. 2.5 kgMaximum cutting speed 707 mm/s at 45° angleMaximum acceleration 13.7 m/s2 (1.4 g) at 45° angleMaximum cutting force 2.1 N (210 gf)Blade type SupersteelPen type Available with pen adapter (*2)Media type up to 0.1mm thick self-adhesive film (vinyl/fluorescent/reflective) * high-intensity reflective film is excludedInterface USB2.0Storage device (external input） USB memory Power source 100 - 240 V AC, adapter output 24 V DC (2A)Power consumption 32 WOperating environment 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)Guaranteed accuracy environment 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)External dimensions (W x D x H) Approx. 784 x 227 x 164 mm (only body part, without roll media stocker)Weight Approx. 8.0 kg (only body part, without roll media stocker)Compatible OS(*3) Windows 10 / 8.1 / 8 / 7　Mac OS X 10.6 to macOS 10.12 (Graphtec Studio : 10.6 - 10.12, Cutting Master 4 10.7 - 10.12(Sierra))Supported software(*4) Cutting Master 4, Graphtec Pro Studio, Graphtec Studio (for Mac)Compatibility Safety UL / cUL, CE markStandards EMC VCCI Class A, FCC Class A, EN55022 Class A

Options & suppliesItem Part number Description Package Graphtec Pro Studio Plus OPS682-PLS Advanced edition of Graphtec Pro Studio 1 set/packCutting blade set PM-BS-001 Standard : Normal media (film, paper, others) 1 set/packCutting blade set PM-BS-002 Long : Thick media (soft rubber, form, others) 1 set/packPen adapter PM-BH-001 Diameter of pen : 6.4 mm - 10.1 mm 1 set/packCarrier sheet of media(13 inch) PM-CM-003 W : 351 mm (13.8 inchs), L : 523 mm (20.5 inchs) 1 sheet/packCarrier sheet of media(20 inch) PM-CM-004 W : 527 mm (20.7 inchs), L : 604 mm (23.7 inchs) 1 sheet/packCutting mat PM-CR-001 1 mat/packSeparate cutter PM-CC-001 For manually cutting from sheets and rolls 1 pc/pack

CompatibleOS*1

Compatible OS*1

Supported Software*1

Compatible OS*1

Standard accessoriesItem QTY DescriptionPower cord 1 Cord type varies by countryCutting blade set 1 Standard, LongCarrier sheet of media 1 330 mm wide (13 inchs)Separate cutter 1 For manually cutting from sheets and rollsRoll media stocker 1USB cable 1 1.5 m longSetup manual 1 written in 10 languagesSafety manual 1 written in 10 languages

http://www.graphteccorp.comWebsite CE LITE_JE10324_1D

Email : [email protected] : +81-45-825-6250 Fax : +81-45-825-6396503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan

RoHS compliant product

For safe operation of equipment

• Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.• Items mentioned are subject to change without notice. For more information about product, please check the web site or contact your local representative.

• Before use, please read the user manual and operate properly in accordance with the description.• To avoid malfunction or an electric shock by current leakage or voltage, please ensure a ground connection and use according to the specification.













Graphtec Pro Studio / Graphtec Studiostandard accessory

Easy-to-use application software for creating and cutting original designs. Includes enhanced functions such as auto-shapes, drop shadows, and editing functions. It can also configure the cutting conditions and other settings on the plotter. EPS / Ai* / CMX*/ PDF* file compatibility allows users to import pre-existing designs.

Software For more information and tutorials visit www.graphtecamerica.com

Cutting Master 4standard accessory

Cutting Master 4, the latest plug-in software for Adobe Illustrator and CorelDRAW Graphics Suite. Send cutting data to the plotter, view cut preview, add registration marks, edit tool conditions/job settings, and more. This easy to use plug-in enables you to get the best performance from your plotter.

Compatible: Win 10/8.1/8/7 Mac 10.7-10.13.3Supported Software: Abode Illustrator CC17-14, CC, CS6, CS4(Win only) | CorelDRAW 2017, X8, X7, X5, X4





Graphtec Pro Studio PlusAvailable for purchase

This optional software possess advanced functions for optimal productivity and advanced designing. Functions include: transformation of characters & graphics, bar code creation, nesting, deformation, shadow, and stripe of texts & shapes, spell check, vectoring, filter for bitmap image, and many more.

Compatible: Win 10/8.1/8/7Compatible: Win 10/8.1/8/7Graphtec Studio for Mac 10.6-10.13.3

* Available in Graphtec Pro studio.

Accessories For genuine Graphtec accessories find a dealer/service centers near you by visiting www.graphtecamerica.com

Upgrade within 90 days of your purchase date at:www.graphtecamerica.com

Graphtec offers Extended Warranty for up to 5 years on specific models

TIP

Please contact your dealer or find dealer location near you at: www.graphtecamerica.com/cp-dealer-locations

Tech Support / Service Centers

Get help on parts and services, please contact Graphtec Authorized Service Centers near you at:www.graphtecamerica.com/cp-service-locations

Like / Follow Graphtec America, Inc on Facebook, Twitter, and subscribe to our Youtube Channels to stay current on latest news, video training, and updates!

For more product information, tutorials, video training,software, FAQ, technical support, warranty, dealer & service locations

please visit www.graphtecamerica.com

Date post:	22-Jan-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

ROLLFEED CUTTER FC8600 SERIES - Regional Supply · 2018. 10. 1. · Programmable Cutting Force 20...

Documents