2
Rollforming / Punching Lines - Machinery Ranges ROLL FORMING STEP BY STEP RANGE OF PROFILE WITH AUNIQUE ROLL SET CUT OFF SAW
Rollforming / Punching Lines - Machinery Ranges
ROLL FORMING STEP BY STEP RANGE OF PROFILE WITH AUNIQUE ROLL SET
CUT OFF SAW
Materials HR & CR coils, carbon steel, stainless steel, aluminium
Material thickness 0,2 to 7 mm
Coil width up to 1550 mm
Line speeds up to 100 m/min
Working principle: operation with on-line punching and flying cutting.
