T. 604-530-9351 E. [email protected]www.tradewestsales.com T. 604-530-9351 E. [email protected]www.tradewestsales.com Upon InsTrUcTIons from ThE sEcUrEd crEdITor, Preview: Thursday, Sept. 6th, Noon - 5 PM 2000 John dEErE 344h WhEEL LoAdEr BID LIVE, REAL TIME, ON-LINE! REGISTER AT: mAcK rL600L WATEr TrUcK 43’ hIBoY TrAILEr TERMS OF SALE payment: full payment day of sale by wire transfer, cash, Visa, mastercard or com- pany cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. full payment by cleared funds must be made before removal of items purchased. Buyer’s premiums: 12% on-site and 15% on-line, will be added to all in- voices. All items in auction are subject to additions, deletions and prior sale. re- moval: removal not later than 12 noon, Wednesday, september 19th, 2012. no removal during auction. All items are sold “as is – where is”, with all faults. While quantities and descriptions are believed to be accurate, the auctioneer, owner, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuine- ness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. no warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. please take advantage of our pre- view and inspection period. note: purchasers of installed assets requiring hot cutting or grinding for dismantling will share the cost of a water truck needed on-site based on times required for removal. Place: Weyerhaueser Road, Okanagan Falls, B.C. AUcTIon sITE: Weyerhaueser Road Okanagan Falls, B.C. (3) conTAInErs To 48’ for shops, ELEcTrIcAL 40’ X 80’ mILL BUILdInG from highway 97, turn east on Weyerhaueser road, just south of oK falls town area. follow Weyerhaueser rd. about 2 miles, to mill site drive on right. road will be well marked from hwy 97 with Tradewest auction signs. Auction site is 25 minutes south of penticton, Bc and 50 minutes north of oroville, WA. oK falls: holiday Beach resort: 1-888-272-2210 penticton, B.c. (20 minutes north of oK falls) is a major resort and winery area with dozens of quality motels & hotels from basic to luxury. reser- vations likely not required for penticton in september. Weather is still excellent in september. LsI dYnAmIc AcTIon 24’ VIBrATInG conVEYor cArThAGE 200hp chIppEr AndErson BLoWEr & 5’ cYcLonE Every item sells to the highest bidder regardless of price! ROLLING STOCK UPCOMING AUCTION Voluntary Plant Closure Due To Change to Distribution Only By SIERRA FLOORING LTD. WEDNESDAY, SEPT. 26th - 12 NOON Place: 1470 Clark Ave, Penticton, BC (3) Wide sanders • Beam saw • shapers • UV Line compressor • packaging • more... mAssEY fErGUson 11 forKLIfT LoAdEr SELLING OFF-SITE IN SURREY, B.C. Weyerhaueser rd. commercial rd. skaha Lake okanagan falls penticton, B.c. 20 minutes To oroville, WA 50 minutes n Weyerhaueser rd.
TERMS OF SALEpayment: full payment day of sale by wire transfer, cash, Visa, mastercard or com-pany cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. full payment by cleared funds must be made before removal of items purchased. Buyer’s premiums: 12% on-site and 15% on-line, will be added to all in-voices. All items in auction are subject to additions, deletions and prior sale. re-moval: removal not later than 12 noon, Wednesday, september 19th, 2012. no removal during auction. All items are sold “as is – where is”, with all faults. While quantities and descriptions are believed to be accurate, the auctioneer, owner, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuine-ness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. no warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. please take advantage of our pre-view and inspection period.note: purchasers of installed assets requiring hot cutting or grinding for dismantling will share the cost of a water truck needed on-site based on times required for removal.
Place:Weyerhaueser Road,Okanagan Falls, B.C.AUcTIon sITE:
Weyerhaueser RoadOkanagan Falls, B.C.
(3) conTAInErs To 48’ for shops, ELEcTrIcAL
40’ X 80’ mILL BUILdInG
from highway 97, turn east on Weyerhaueser road, just south of oK falls town area. follow Weyerhaueser rd. about 2 miles, to mill site drive on right. road will be well marked from hwy 97 with Tradewest auction signs. Auction site is 25 minutes south of penticton, Bc and 50 minutes north of oroville, WA.
oK falls: holiday Beach resort: 1-888-272-2210penticton, B.c. (20 minutes north of oK falls) is a major resort and winery area with dozens of quality motels & hotels from basic to luxury. reser-vations likely not required for penticton in september. Weather is still excellent in september.
LsI dYnAmIc AcTIon 24’ VIBrATInG conVEYor
cArThAGE 200hp chIppEr
AndErson BLoWEr & 5’ cYcLonE
Every item sells to the highest bidder regardless of price!
ROLLING STOCK
UPCOMING AUCTION Voluntary Plant Closure Due To Change to Distribution Only By
SIERRA FLOORING LTD.WEDNESDAY, SEPT. 26th - 12 NOON
Place: 1470 Clark Ave, Penticton, BC(3) Wide sanders • Beam saw • shapers • UV Line
compressor • packaging • more...
mAssEY fErGUson 11 forKLIfT LoAdEr
SELLING OFF-SITE IN SURREY, B.C.
Weyerhaueser r
d.
commercial rd.
skaha Lake
okanagan falls
penticton, B.c.20 minutes
To oroville, WA50 minutes
n
Weyerhaueser rd.
EXco 36’’ prImArY 2 sAW scrAGG
BoB hAnnA doUBLE pALLET noTchEr
(2) cUsTom p.E.T. sAWs
(2) p.E.T. sAW sTAcKErs & oUTfEEds BroWn BoVErI 125KVA dIEsEL GEnErATor cUmmIns n14 500 KVA dIEsEL GEnErATor cAT 3406B dIEsEL EnGInE 2006 KILn dIrEcT 12’ X 48’ pALLET KILn
cUsTom 12” scrAGG sAW cUsTom horIZonTAL mULTI-rIp sAW BEAVEr 49 pLAnEr sYsTEm BrAdson 18’’ rInG dEBArKEr
coUTTs rh36 BoArd EdGEr 9’ X 42’ 4 rUn TrAnsfEr
32” hULA sAW sYsTEmsTrAIGhT LInE rIp sAW
2000 John Deere 344h Loader, s/n LU344hx710246, Engine rebuilt in 2011; Imic 8’ bucket, 17.5-25 tires • Massey Ferguson 11 Loader w/forks, diesel • 1981 Mack rL600L Water Truck, red, 12 speed trans., front axle 14,000 lb, rear capacity 38,000 lb, wheelbase 230”, camelback susp., dayton wheels, tires good, air brakes, engine brake, dual fuel tanks, 3,500 Gal tank (noTE: Located in sur-rey, B.c., and will be sold during auction off-site. Available for viewing up to sept. 5th) • 43’ Hiboy 5th wheel trailer, T/A, wood deck • Hydraulic Log grapple, Lf-512 6’, w/ quick coupler attachment • Fleco loader fork attachment, 9Lf 5000 • pallet of loader snow chains
Exco Scragg Saw Line: 72’ hourglass roll log infeed, (27) 20” hourglass rolls & kickers • 12’w x 22’ 3 strand infeed deck • Exco 2 saw scragg mill, 36” blades, w/ 18’ Infeed chain & positioning rolls • Twin outfeed belts to 18’ x 48” outfeed rollcase Debarker Line: 18’L x 10’ 3 strand Infeed deck • Bradson 16’ flyted chain log infeed w/ motor & reducer • Bradson 18” ring debarker w/ booth & controls • 30’ hourglass roll log outfeed, 8 rolls, w/ motor & reducer • 32” double chain hula saw infeed Hula Saw: 32” hula saw, 25hp, w/ 7’ hourglass roll outfeed, (6) 12” x 6” hourglass rolls • 12’ x 6’8” 4 strand transfer Scragg Saw Line: 12” x 12” Custom Scragg Saw, double 40hp arbors, (3) 7.5 can’t arbors, (2) side slab saws,(2) side finishing saws, vertical edger-type saws, w/sharp feed chain • Custom Horizontal Multirip saw, 75hp, 1775rpm, 230/460VPallet Line: (2) custom Built 48” p.E.T. Trimmers w/Timberstar inkrolls, w/ stacker system • Bob Hanna double head notcher, 49”-52”, w/ 2 strand bar type unscrambler • (2) 40” x 15’ 2 strand stacker outfeed transfers w/ 5hp sm cyclo • Inking station/bridge Planer: Beaver 49 planer/moulder, 100hp, s/n 44, 4 head • chipper Blower & hpU • more...Major Machinery: Cat 3406B 6 cylinder diesel Engine, skid mounted w/air cooler (Exco scragg drive unit) • Coutts Board Edger, rh36, 75hp, s/n 50n 462 W/ Infeed rolls & drive • Straight line Ripsaw, heavy duty 50hp; w/ pinch rolls, 22” Blade • 8’ X 8’ 4 strand multi Trim saw, (3) 5 hp arbors • 12’ 2 strand saw End notcher, (2) overhead 5hp saw arbors, (2) 7.5hp notching arbors • mainland d/A 48” Gang Edger • radial arm saw • more…
Generators & Electrics: Cummins n14 diesel Genset, 500 KVA 480V, w/ switch, air cooler • Brown Boveri 125KW, 156 KVA, Genset 480V, w/ White diesel Engine, 6 cylinder • Delta EVI 75KVA Transformer, 600/480v, 3ph • Polygon 10KVA, 1ph, 480-120/240 • Siemens 30 and 60amp switches • pLc cabinets • operator console • misc electrical panels, 30-200amp • 2 section mcc • (2) single section mcc’s • Teck cable in mill building • more Dry Kilns: 2006 Kiln Direct 12’ x 48’ modular pallet heat Treating Kiln, propane-fired; directview 1000 digital controls; power gas burner G57B-2A2f91; 300,000 BTU, 1.5 million rated, honeywell flame Amplifier • (2) sets of spare kiln doors Transfers & Conveyors: 15’w x 17’ 9 strand camelback transfer, h78B chain, Toshiba 7.5hp drive & sm-cyclo gear drive • 4 strand Transfer, 9’w x 42’; w/ 7.5hp drive & radicon reducer • 2 strand camelback edger infeed, 5’ x 30’, h130 chain • 3 strand camelback transfer, 6’ x 11’ • 4 strand lugged transfer, 7’ x 7’ • 3 strand transfer deck, 8’ x 15’; w/ drive • Belt conveyor, 12” x 48’ • Belt conveyor, 12” x 22’ • 14’ turntable, electric drive Chipping & Dust Collection: Carthage 200hp chipper, side feed, top discharge • LSI Dynamic Action 24’ Vibrating conveyor, s/n 001014-1, w/ metal detector • 55’ Box chain waste conveyor w/ drive •30 Unit chip Bin (dismantled on ground), w/ all components • 5’ cyclone w/ Anderson Blower Waste Conveyors: 40’ Incline box chain waste conveyor • 58’ chain waste conveyor • 15’ Incline chain waste conveyor • 60’ x 16’ Winged box chain waste conveyor Shop & Grinding: Hanchett Knife grinder • circular saw grinder • Lodge & Shipley 20” x 53” Lathe, follower rest, Q/c Tool holder • McDougall Engine Lathe, 20” x 132” • Parkson Universal mill, 16” x 60” table • Miller 500Amp Welder • Lincoln Weldan power Ac/dc Welder/Generator, 200 amp • 3 & 4 Jaw chucks & faceplate • misc. tools, double Grinder, etc. • misc. steel on rackGeneral: Air Champ 5hp compressor, 230/460V • 7.5 & 15hp hydraulic power Units • steel lumber carts • (2) Timberstar ink rolls • All catwalk & stairs • portable compressor • (2) diesel tanks • fuel tanks • portable staircases • (3) flatdeck trailer assemblies, used as bases for pallet line • more... Buildings: Main Mill Building, 60’ x 120’ Wood frame, metal cladding & roof; w/ lighting • Office Building, 15’ X 30’ • (3) 40’ steel container Buildings Inventory: sheaves, bearings, sleeves, sprockets, spare transfer chain, assorted saw blades for multirip, scragg, p.E.T. saws • milling tools, drill bits, taps & dies, machine parts, chipper knives, etc. Log Inventory: numerous saw logs on property
PALLET LINE
NOTE: Listing subject to changes, additions and deletions without notice. PROPANE FIRED
