Pricing in effect until November 30th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
Ron-Son’s Torch Repairs & SalesFall Special
INDEX
Pages 1 & 2 Page 3
MIG Machines
Pages 4 & 5
Pages 9 & 10
TIG Machines
Engine Drivers
Plasma Machines
Multiprocessor Machines
Accessories
Pages 7 - 9Pages 7
Pricing in effect until November 30th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
SubArc Wire Feeders
Pages 6
Pages 11 - 16
MIG
Pricing in effect until November 30th, 2018 or while quantities. All prices are subject to change, may vary without prior notice. 1
PKG,Millermatic 350P AL W/XR-AAluma-Pro 25 951452
First single- or three-phase power Millermatic that's optimized to weld aluminum. Perfect for fabrication, manufacturing, maintenance and repair.
Millermatic 252 230/460/575V 60HZ 1PH907322
$4,024.20 $4,803.30
Welds material from 22 gauge to 1/2 in thick in a single pass. Highest output in its class.
$10,655.43 $12,718.35
$11,749.05 $9,843.35
Pkg, Deltaweld 302 Stationary 951235
Industry standard for industrial MIG welding. Designed for manufacturing operations, with 100 percent duty cycle for extended arc-on time.
MIG
2
PKG,Continuum™ 350 MIGRunner951671
New generation of advanced industrial welding solutions improves productivity through weld quality, ease of use and system flexibility.
All-new power source designSmart and powerful digital design has the fast response needed to deliver the most stable welding performance for better welding results.Developed as a platform to meet current and future needs with integrated expansion capabilities.
Superior Arc PerformanceImproved Accu-Pulse® provides less spatter, better arc control and less heat input – very forgiving to changes in stick-out.Improved MIG performance delivers consistently smooth arc starts and reduced spatter.
Deltaweld®951234 [302 MIG runner PKG] 951301 [452 Stationary PKG]
$10,585.31 $12,634.65
Industry standard for industrial MIG welding. Designed for manufacturing operations, with 100 percent duty cycle for extended arc-on time.
951234 [302 MIG runner PKG]
951301 [452 Stationary PKG]
$12,337.65 $10,336.48
$15,073.24 $17,991.45
WHAT'S INCLUDED• .035 - .045 reversible dual V drive rolls• 15ft 4/0 work cable with 600A C-Clamp• 3ft gas hose• 6ft 4/0 wire feeder to power source weld cable• Bernard™ BTB Gun 400 AMP, 15FT• Centerfire contact tips, .035 (QTY 3), .045 (QTY 2)• Deltaweld• Regulator/flowmeterS-74D Feeder
Pricing in effect until November 30th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
3
Dimension™ 650 380/460 V MIGRunner™ Package951637
Developed for harsh environmental conditions and output requirements that range from power-intensive to precise.
PKG, Dynasty 280 DX (CPS) CV MIG PKG951753
$10,873.72 $12,978.90
The Dynasty 280 Series has now expanded beyond the industry leading TIG and Stick performance by the additional CV output which allows for MIG capability - making this multiprocess line the perfect solution for ship building, construction, mechanical contractors, educational and more.
$11,928.27 $14,238.45
$15,618.15 $13,084.89
XMT® 350 CC/CV, S-74D, MIGRunner™ Package951314
Outstanding multiprocess inverter with built-in features providing the ultimate in productivity. Auto-Line provides link-free primary power operation.
MULTIPROCESSOR
Pricing in effect until November 30th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
4
Maxstar® 161 STH 120-240 V, X-Case,
Fingertip Contractor Package
907711001
Best of Class - provides maxium portability and
performance in the most compact TIG/Stick package in the
industry. Dependability and performance all in one
machine.
Diversion™ 180 TIG Welder
907627
$3,186.11 $3,802.95
Perfect for the personal user, this AC/DC TIG machine
upgrade has both 120V and 240V input power capability.
$4,236.84 $5,507.60
$3,935.25 $3,296.95
Syncrowave® 210 TIG MIG Spoolmate™
150 Package
951684
The easy-to-use Syncrowave® 210 provides legacy arc
performance that allows you to expand your
capabilities with an all-in-one package.
TIG
Pricing in effect until November 30th
, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
TIG
5
Dynasty® 800 208-575 V, Foot Control Complete Package951696
The Dynasty 800 is a powerful, compact power source capable of welding up to 1" aluminum. Total arc control provides maximum productivity and weld quality while conserving energy compared to traditional welding machines.
Dynasty® 280 DX 208-575 V, Foot Control Complete Package951468
$11,046.77 $13,185.45
The Dynasty 280 Series is a powerful combination of capability and portability. Weighing only 52 pounds, it can weld up to 3/8" thick material. The AC/DC TIG/Stick power sources feature an energy-efficient inverter design and Auto-Line™ technology.
$12,827.00 $15,310.35
$28,930.50 $24,237.97
Syncrowave® 350 LX 200/230/460 V, Foot Control Complete Package951622
Syncrowave 350 LX provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands.
Pricing in effect until November 30th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
PLASMA
6
$2,095.80 $2,501.55
Spectrum® 375 X-TREME™ with XT30 Torch907529
Cuts up to 3/8 in. mild steel. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.
Spectrum 875 Auto-Line Plasma Cutter with XT60 Long-Body Torch with 50-ft. Cable907584004
Compact, 54 lb, multi-voltage (208-575V 1/3PH) unit cuts up to 7/8” mild steel.
Spectrum 875 Plasma Cutter with XT60 Long-Body Torch with 25-ft. Cable907583002
$4,250.40 $5,073.30
Compact, 51 lb, 230/208V 1 PH unit provides plenty of power for 7/8 in. mild steel cutting. For end user convenience, the unit has no pressure gauge or manual regulator knob. The unit automatically adjusts the air pressure to the torch for optimum cutting and gouging. No adjustments necessary.
$5,842.80 $4,895.10
Pricing in effect until November 30th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
7
$3,405.53 $4,064.85
SuitCase® X-TREME™ 12VS, Bernard ™ BTB 300 A Gun Pkg951543
Voltage-sensing, portable feeders designed to run off of arc voltage from almost any welding power source, provides extreme reliability for construction and fabrication.
SubArc 3-Wheel Tractor951755
The Miller Tractor is a highly flexible self-contained welding package comprised of a travel system and a variety of quality engineered components designed to produce precision, high-quality Submerged Arc welds.
$20,602.35 $17,260.65
$63,484.71 $75,775.50
SubArc DC 650 Digital Portable Welding System951675
SubArc Portable Welding System is a ready-to-weld submerged arc system for pressure vessel, pipe and welding that requires positioning equipment which can adapt to your application.
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
WIRE FEEDERS
SUBARC
WIRE FEEDERS
8
22A951190
Simple and cost-effective two drive roll wire feeder for industrial manufacturing and fabricating. Ideal for most high-duty-cycle applications requiring day-in/day-out trouble-free operation.
ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg951729
$3,361.42 $4,012.20
Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach technology — and improve your bottom line!
$2,528.98 $3,018.60
$2,207.25 $1,849.23
S-74S951196
Standard, simple feeder for most heavy-industrial applications. Available in dual-wire models, allows two different wire types to be available on one feeder, avoiding downtime from changing spools and drive rolls. High-torque permanent-magnet motor, sealed ball bearing gear drive and solid-state speed and brake control are maintenance free for long life.
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
WIRE FEEDERS
9
Blue Star® 185 (Kohler)907664
Reliable outdoor power! Great for farm, ranch, maintenance and hobbyist. Its small foot print and light weight mean it takes up little truck space and is easy to move around. Optional running gear also makes the Blue Star one-man portable.
S-74S Swingarc™, 8 Ft Single951522
$6,322.45 $7,546.50
Swingarc boom-mounted wire feeders bring an extra dimension of flexibility and efficiency to the weld station dealing with large weldments, or wherever operator mobility is required.
$11,766.11 $14,044.05
$5,374.51 $4,502.77
Bobcat™ 200 Air Pak™907706
The Bobcat 200 Air Pak is the industry-leading power solution for increasing your capabilities, reducing your expenses, and boosting profitability and efficiency.
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
ENGINE DRIVES
ENGINE DRIVES
10
Trailblazer® 325 (Kohler) EFI, GFCI w/ Excel™ Power & ArcReach®907754002
Trailblazer® welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer exclusive Auto-Speed™ technology delivers superior runtimes, increased fuel efficiency, and improved welder/generator performance. No other compact machine in the 300-amp class delivers more welding power or more auxiliary power with better fuel efficiency and less noise —for productive, profitable, quieter jobsites.
Trailblazer® 302 Air Pak™ w/GFCI, Electric Fuel Pump907549
$15,273.88 $18,230.94
Powerful all-in-one tool is designed for repair and construction with unbeatable multiprocess weld quality, integrated rotary screw air compressor, and 13,000 watts of generator power for job site tools.
$17,206.50 $20,537.71
$12,776.40 $10,704.07
Big Blue® 400 Pro (Kubota) ArcReach®907732001
Designed with the professional in mind, the Big Blue 400 Pro is the best for ease of use, reliability and fuel economy.
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
11
Quick-Connects with Check Valves
MIG Pliers 8-Way Multi-PurposeWMPP2210C
Pliers, MIG 8-way multi purpose tool by Weldmark
FEATURES & SPECIFICATIONS: • Brass construction provides long service life–cycle tested over 10 000 operations indicating a service life of 10 to 12 years of comparable use • Non-interchangeable Oxygen and Fuel Gas connectors prevent accidental gas mixing • Instant closure on reverse flow Check Valves with total shutoff at only 10 oz. of back pressure • Exceed CGA flow specifications–1100 SCFH flow at 125 PSIG inlet pressure and 800 SCFH flow at 125 PSIG inlet pressure when 2 additional check valves are used in conjunction with the Quick-Connects
• Spring loaded locking mechanism responds to fingertip action and achieves a gas-tight connection • For inert gas models, demand valve on supply side creates a positive seal when fitting is not connected • Double seal socket connection on second seal provides added safety protection • 200 psig maximum operating pressure
Western's Quick-Connects provide fast, reliable and positive connections and quick disconnections for torches, hoses and regulators. All models are color-coded for gas service for added safety (oxygen/green, fuel gas/red, inert gas/blue). Oxy/fuel gas models include integral reverse flow Check Valves. Quick-Connects fit all B-size welding and cutting equipment.
$97.10 $63.25
$45.85 $31.95
$9.99 $17.05
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
ACCESSORIES
$61.25 $92.50
QDB10 Torch-to-Hose Set
QDB33 Flowmeter-to-Hose Individual
QDB30 Regulator-to-Hose Set
12
SURFOX MINI™54-D 055
The ergonomically designed SURFOX MINI™ comes equipped with a
variable power setting that ensures a perfect finish on even the most
delicate surfaces. This unit utilizes refillable electrolyte cartridges
instead of an integrated tank to reduce the weight and increase
portability. Excellent for use on repairs, touch-ups and small jobs. This
newly redesigned unit can clean TIG or spot welds on stainless steel
and MIG, TIG or spot welds on aluminum. It can also mark stainless
steel, aluminum and titanium surfaces with the use of a SURFOX
marking kit.
SURFOX™ 20554-D 215
This industrial weld cleaning system features extensive safety and productivity features to minimize
consumable use and provide economical cleaning and passivation of stainless steel TIG & spot welds.
The SURFOX 205™ has been engineered to clean MIG, TIG
and spot welds on aluminum, and with the use of special
marking kits (sold separately), it can also mark stainless steel,
aluminum and titanium surfaces. This is a durable production
model designed for every day use.
SURFOX™ 30554-D 315
The SURFOX™ 305 is our patented electrochemical weld cleaning system for
stainless steel and aluminum. It quickly and easily removes heat tint from the heat-
effected zone of MIG, TIG and spot welds, cleaning the surface and allowing
passivation on stainless steel to begin without altering the surface finish.
Call for special pricing
Call for special pricing
Call for special pricing
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
ACCESSORIES
The integrated tank and flow-through system ensures the
electrolyte solution is delivered directly to the workpiece,
minimizing the potential for spillage or cross-
contamination. The dynamic current control also ensures
that the electrical current will not cause micropitting on the
surface.
Years of welding have trained you to know exactly what you need in a hood: crucial comfort, large lens, and next generation technology. Every special operation needs special equipment that gets the job done, and when it comes to your helmet, SENTINEL™ is worn by the best. Welding hoods have looked the same for years. But no longer. Sentinel's streamlined shell design is not too big and not too small, accounting for a range of different head sizes and shaking up the aesthetics at the same time. The flush exterior also minimizes extrusions, so nothing catches when working in a tight space.
13
Ironman PS30A563
Exceptional performance with added safety features.
If it’s high performance and added safety you’re after, the Ironman™ PS comes with a paddle switch and a mechanical brake to stop grinding wheels from turning within 2 seconds of relieving the trigger, and cutting wheels within 1.5 seconds. It delivers 1,750 watts of power and comes with a Walter Stabilizer™ to reduce vibration, improve ergonomics and extend the life and removal rate of your abrasives.
Sentinel 7000800
$390.00 $449.99
$594.10 $495.00
• Revolutionary shell design - high impact resistance nylon.• Halo™ headgear - ergonomic, infinitely-adjustable 5
point head gear provides extreme comfort and balance.Low-profile design, central pivot point allows formaximum head clearance while helmet is in the upposition.
• 3.93 x 2.36 in. (100 x 60 mm) viewing area. 1/1/1/2 –5-13 ADF.
• Color touch screen control panel with 8 separatememory settings and externally activated shade 4 GrindButton.
• Hard hat adapter option available for use with ESAB hardhat (excluding Canada).
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
ACCESSORIES
Sub-Micronic Compressed Air Filter, 1/4 Inch NptM26
A Sub-Micronic Compressed Air Filter that effectively removes oil aerosols and condensed moisture and will:• Eliminate Arc "Sputter"• Restore the Plasma System to Maximum
Cutting Efficiency• Reduce Corrosive wear of the Electrode and
Tip• The installation of a Motor Guard Filter on the
Plasma Cutting system downstream of the airregulator will effectively remove thecontamination from the compressed air line.This eliminates the "sputter" from the arc,restoring the plasma system to maximumcutting efficiency, and dramatically reducingthe corrosive wear on the tip and electrode.
$108.25 $140.00
14Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
ACCESSORIES
• Designed to remove the smallest contaminant, oil-aerosol or drop of moisture to supply Clean, Dry,Oil-Free air to the point of use. Users of the filtersreport contaminant free air with higher flow ratesand minimal pressure drops.
Welding BlanketWM870066 [6x6] WM870068 [6x8]
$58.25 $86.75
$76.25 $127.50
Fiberglass material is coated on one side with neoprene which adds strength and durability, the other side has an acrylic coating. Withstands continuous exposure to 400F, excursion up to 1,000F. Acrylic side should be directed to heat source.
WM870066 [6x6]
WM870068 [6x8]
15
MagSpring™ ClampsUBV65
Quick-Set Clamps for fast, convenient clamping.The spring-loaded, one-handed clamp with quick-set V-Pad.The Spring Arm in conjunction with the V-Pad allows users to free up one hand to position the workpiece.
$23.45 $16.75
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.
ACCESSORIES
Valve Action® Paint Marker - Markal96821 [Yellow] 96822 [Red] 96823 [Black] 9620 [White]
$6.85 $4.29
Valve Action is a fast-drying liquid paint marker that provides long-lasting, wear- and weather-resistant marks that are safe for almost any surface. As the most versatile liquid paint marker in the world, the xylene-free paint reduces user health risks and is available in 18 bold and fluorescent colors for accurate mark identification.
$61.75 $44.05
Ground Hog™ ClampsGP950
The groove design on the copperhead seals out weld spatter and reduces particle buildup. Side screw provides a secure cable connection. Ground Hog body rotates for cable positioning.Rated at 450 AMPS @ 60% duty cycle (with 2/0 cable)Prevents current restriction and allows complete current transfer.Controls the electrical current by isolating the contact surface and the cable connection.Improve arc stability and cable life, and reduce power consumption.
16
Sheet Metal MagnetsMCB82
Ideal for positioning and holding sheet metal for butt welding. Hold sheet metal and automotive metal panels firmly in a positive location for cutting, welding, tacking, painting and repair operations. Rare earth disc magnets in the magnetic plate have superior gripping power. Rubber Pads on the Sheet Metal Magnets provide friction for increased drag force in sheet metal handling applications. Use horizontally or vertically. The strong, generously sized plastic handle makes placing, moving, and removing the Sheet Metal Magnets fast and easy.
$69.30 $97.25
Snake MagnetsMFC318
$22.00 $30.80
Spring Clamp can be used as the third hand to hold tools. When using the versatile Magnetic V-Pads, the Snake Magnet can hold against flat, round, square or angled surfaces. The Snake Magnet gives you the flexibility to hold stock at odd angles. 18ʺ (450 mm) cable with 2 flat magnetic pads.
ACCESSORIES
Pricing in effect until September 7th, 2018 or while quantities. All prices are subject to change, may vary without prior notice.