Rose Door FurnitureD
oor Furniture and General Hardw
are
3.15Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Rose Door Furniture
Rose Door Furniture
3.16Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Description The Robert Watson Collection of door furniture consists of three lever designs and a range of complementing escutcheons, turns and emergency release sets. The roseless design of the furniture is unprecedented and the innovation and lateral thinking involved in the development of the products has led to them being patent protected and design registered.
ApplicationThe Robert Watson range is suitable for commercial as well as residential use.
It can be fitted with:
• Lockwood Synergy 3570 Series Mortice Locks
• Lockwood 6580 Mortice Locks (38mm backset, metal doors only)
• Lockwood 531 Latches and A6208 Tubular Bolts
Features and SpecificationsDimensionsBody: 36mm diameter. Projection from door: 62.5mm.
MaterialsFurniture body: aluminium. Mounting stock and other internal components: stainless steel, steel and brass.
FixingFurniture is fixed to 3570 Series Mortice Locks using a specially developed pair of steel adaptor plates that are secured through the lock case using screws.
Robert Watson furniture may also be fitted with a Lockwood 531 Latch using a steel adaptor which locates over the body of the latch.
A special adaptor for fixing Robert Watson furniture to 6580 Narrow Style Mortice Locks in hollow aluminium door sections is also available.
Door Thickness32mm minimum for 3570 and 6580 Mortice Locks, 35mm minimum for 531 Latches. Maximum 50mm.
For doors 51mm to 62mm thick, use accessory pack RW00-42. (For use with mortice lock installations only).
Standard FinishesSatin Anodised SA Powdercoat PC The anodised aluminium finishes are categorised as a soft finish and form part of the Lockwood Guarantee (Item 7).
Robert Watson Collection
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.17Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
LEVER DESIGN "A1"
62.5
36
18
143
6
62.5
36
18
143
6
LEVER DESIGN "A2"
62.5
36
30
143
6
LEVER DESIGN "A3"
18
Robert Watson Collection
Tangent®
DimensionsLength 143 mm
Projection 62.5 mm
Finger Clearance 44.5 mm
Centre D
DimensionsLength 143 mm
Projection 62.5 mm
Finger Clearance 44.5 mm
Centre
DimensionsLength 143 mm
Projection 62.5 mm
Finger Clearance 44.5 mm
Rose Door Furniture
3.18Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
EscutcheonsThese escutcheons are designed to be fitted with Lockwood oval cylinders and the Robert Watson range of turns and emergency turns. Fitted using a grub screw, they ensure that the accessories they are fitted with are aesthetically pleasing.
Use with Lockwood Mortice Locks and A6208 Bolts. The escutcheons are available in different sizes for suitability to different door thicknesses.
Note: Escutcheons must be ordered separately for use with oval cylinders, turns and emergency release turns.
36
18.2
32.2
A
CYLINDER TRIM 11mmDOOR THICKNESS RANGE 45 – 50mm
Part Numbers
Part Number Door Thickness (A) Dimension
RW06/38 35 – 38mm thick 17mm
RW06/44 39 – 44mm thick 14mm
RW06/50 45 – 50mm thick 11mm
RW06/56 51 – 56mm thick* 8mm
RW06/62 57 – 62mm thick* 5mm
* Extended door accessory pack required if levers are to be installed on doors of this thickness.
Robert Watson Collection Escutcheons
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.19Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
28
EMERGENCY BUTTON ASSEMBLY
18
31.6
28
41.4
18
31.6
INDICATOR TURN KNOB ASSEMBLY
28
41.4
18
31.6
INDICATOR TURN KNOB ASSEMBLY
28
41.4
18
31.6
INDICATOR TURN KNOB ASSEMBLY
Accessories – use with 3570 Series and 6580 Mortice Locks
RW07 – Turn Knob
RW08 – Privacy Indicator Turn Knob
RW09 – Turn Knob and Emergency Release Set
Note: Escutcheon must be ordered separately. Refer to page 3.22 for mortice lock adaptors.
Robert Watson Collection Accessories
Rose Door Furniture
3.20Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
RW10 – Turn Knob and Privacy Indicator Emergency Release Set
RW11 – Privacy Indicator Turn Knob and Privacy Indicator Emergency Release Set
28
41.4
18
31.6
INDICATOR TURN KNOB ASSEMBLY
28 18
31.6
INDICATOR EMERGENCY BUTTON ASSEMBLY
28 18
31.6
INDICATOR EMERGENCY BUTTON ASSEMBLY
28
41.4
18
31.6
INDICATOR TURN KNOB ASSEMBLY
Note: Escutcheon must be ordered separately. Refer to page 3.22 for mortice lock adaptors.
Robert Watson Collection Accessories
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.21Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
31
EMERGENCY BUTTON ASSEMBLY
18
31.6
TURN KNOB ASSEMBLY
31
44
18
31.6
Accessories – use with Lockwood A6208 Tubular Bolt
Note: Escutcheon must be ordered separately. Refer to page 3.22 for mortice lock adaptors.
RW13 – Turn Knob and Emergency Release Set
Robert Watson Collection Accessories
Accessories – Latch KitsLatch kits are supplied with adaptors required to fit Robert Watson Levers.
Part Numbers
RW531/60SC – 60mm backset
RW531/70SC – 70mm backset
RW531/127SC – 127mm backset
Rose Door Furniture
3.22Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Mortice Lock AdaptorsSpecial adaptors are required when using Robert Watson Turns. These can be ordered as spare parts. Refer to list below.
Installation FixturesThis stainless steel fixture makes installation easy. It is ideal when fitting furniture for large projects.
Note: Paper templates are supplied with all furniture.
Part Numbers
RW98 – Template for Lockwood 6580 Lock (metal doors only)
RW99 – Template for Lockwood 3570 Series Mortice Locks
Function Adaptor Function Adaptor
3570XTR SP3570-6050 3572WTR SP3572-6050
3570XTL SP3570-6050 3572WTL SP3572-6150
3570-TR SP3570-6050 3572XAR SP3572-6550
3570-TL SP3570-6050 3572XAL SP3572-6650
3571WTR SP3571-6050 3573WTR SP3571-6050
3571WTL SP3571-6050 3573WTL SP3571-6050
3571-TR SP3571-6050 3573-TR SP3571-6050
3571-TL SP3571-6050 3573-TL SP3571-6050
3572XTR SP3572-6250 3574WTR SP3572-6250
3572XTL SP3572-6250 3574WTL SP3572-6250
3572-TR SP3572-6250 3574ETR SP3572-6250
3572-TL SP3572-6250 3574ETL SP3572-6250
3574ZTR SP3570-6050
3574ZTL SP3570-6050
Robert Watson Collection Accessories
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.23Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Product
RW
Function
07
Finish
SA
/
Product
RW
Use
06
Thickness
50
Finish
SA
Product
Robert Watson RW
Use
06
Thickness
Doors 57mm – 62mm 62
Doors 51mm – 56mm 56
Doors 45mm – 50mm 50
Doors 39mm – 44mm 44
Doors 35mm – 38mm 38
Finish
Satin Anodised SA
Powdercoat PC
Product
Robert Watson RW
Function
Turn Knob 07
Privacy Indicating Turn Knob 08
Turn Knob and Emergency Release Set 09
Turn Knob/Privacy Indicating Emergency Release Set 10
Privacy Indicating Turn Knob and Privacy Indicating Emergency Release Set 11
Finish
Satin Anodised SA
Powdercoat PC
Product
Robert Watson RW
Use
If intended to fit using Lockwood 530 Latch 30
If intended to fit using Lockwood 3570 Series Mortice Locks 70
If intended to fit using Lockwood 6580 Narrow Style Mortice Lock (metal door only) 80
If intended to fit to a metal door without lock 10
If intended to fit to a timberdoor without lock 20
Function
Operating Full Set 00
Operating Half Set 01
Fixed Full Set 02
Fixed Half Set 03
Lever
Tangent® A1
Centre A2
Centre D A3
Handing (half sets only)
Left Handed L
Right Handed R
Finish
Satin Anodised SA
Powdercoat PC
Ordering Procedure – Escutcheons
Ordering Procedure – Turn Knobs and Emergency release turns (For use with Lockwood Mortice Locks)
Ordering Procedure – Lever SetsSample part number RW70/01/A1LSA is made up of several sections. Choose your product by selecting an option from each section.
For example:
/ /
Product
RW
Use
70
Function
01
Lever
A1
Handing
L
Finish
SA
Robert Watson Collection Ordering Procedure
Rose Door Furniture
3.24Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
/
Product
RW
Product
RW
Latch
531
Function
13
Backset
60
Finish
SA
Finish
SC
Product
Robert Watson RW
Latch
Plain Latch 531
Backset
60mm backset 60
70mm backset 70
127mm backset 127
Finish
Satin Chrome SC
Product
Robert Watson RW
Function
Turn Knob and Emergency Release Set 13
Finish
Satin Anodised SA
Powdercoat PC
Ordering Procedure – Latch Kits
Ordering Procedure – Turn Knob and Emergency Release Turns (For use with Lockwood A6208 Tubular Bolts)
Latch Kits are supplied with adaptor to enable use with Robert Watson Furniture.
Robert Watson Collection Ordering Procedure
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.25Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Designed for use with Lockwood 3570 Series Mortice Locks and Latches, as well as the Lockwood A5250 Tubular Latch.
May be used with Lockwood Daintree Privacy Adaptors when 1321 internal rose is selected.
Features and SpecificationsDimensions53mm diameter x 11.6mm
HandingA removable stop screw allows all symmetrically designed levers (e.g. Cadenza) to be handed on site. Levers of asymmetrical design (e.g. Veloce) cannot be reversed. Specify left or right handed when ordering.
MaterialsAll Lockwood roses and levers contained in the 1220 series are of solid brass construction.
FixingFully concealed on both sides.
Door Thickness33mm minimum for A5250 Latches and 32mm minimum for Lockwood 3570 Series Mortice Locks. Maximum door thickness 50mm. Refer to lockweb.com.au for information on fixing screw options for thicker doors.
Finishes StandardSatin Chrome Brushed SC
Non StandardArchitectural Bronze AB Architectural Bronze Unlaquered AU Antique Copper AC Chrome Plate CP Polished Brass Unlacquered BU Polished Brass PB Polyester Powdercoat PC Satin Brass SB Oil Rubbed Bronze ORB
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 45 48*41*
53* 55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55A32 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
8346.5 mm
1226
53 mm
1220
1227 1227P 1228 1228P
1231 1232
1221 1224 12251222 1223
1227DT*
53
11.6
46.5 mm
1226
53 mm
1220
1227 1227P 1228 1228P
1231 1232
1221 1224 12251222 1223
1227DT*
55 mm
1321
Rose and Lever Compatibility Chart
Levers to Suit
Cylinder and Turn Escutcheons
Rose numbers marked red indicate no lever option
* Denotes handed levers
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
1220 Series Symphony® Rose Furniture
For detailed information regarding brass levers refer to page 3.100
Rose Door Furniture
3.26Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
1220 Series Symphony® Levers
Capella 50
Lever 70
Intermezzo 41
Veloce 53
Arpeggio 44
Lever 55
Sonata 45
Overture 59
Nocturne 48
Lever 32
Tempo 71Lever 62
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.27Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
1220 Series Symphony® Levers
Lever 79B
Lever 94
Lever 80
Chorus Line 97
Ving 74
Lever 83
Cadenza 78
Lever 90
Tenor 79
Lever 91
Rose Door Furniture
3.28Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
46.5
11.6
1227 Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass turn for use in all snibbing applications. Features concealed fixing.
1226 Oval Cylinder EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionPractical, secure and pleasing to the eye, this brass escutcheon has an oval cylinder hole. Features concealed fixing.
1220 Series Symphony® Cylinder and Turn Escutcheons
A range of escutcheons for the fitting of cylinders, turns and emergency turns is available in the same wide choice of metal finishes to complement all Symphony lever furniture installations. Dimensions shown for the cylinder escutcheon are consistent for entire range.
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.29Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
1227DTCP
50 mm
11.5 mm
1227DTCP
1427DTCP1427DTCP
57 mm
10.8 mm
1367DTCP
50 mm
9.5 mm
1367DTCP
1377DTCP
50 mm
11.5 mm
1377DTCP
1227DTCP
50 mm
11.5 mm
1227DTCP
1427DTCP1427DTCP
57 mm
10.8 mm
1367DTCP
50 mm
9.5 mm
1367DTCP
1377DTCP
50 mm
11.5 mm
1377DTCP
1227P Privacy Indicator Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass escutcheon. For use in applications where privacy turnknob access is required effectively and easily. Features concealed fixing.
1228 Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass emergency release escutcheon for use in privacy applications.Features concealed fixing.
1227DT* Disabled Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass escutcheon. For use in applications where easy access is required especially in a disabled access environment.Features concealed fixing. * Specify Handing
1228P Privacy Indicator Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass emergency release escutcheon. For use in indicating privacy applications. Features concealed fixing.
1220 Series Symphony® Cylinder and Turn Escutcheons
Rose Door Furniture
3.30Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
1220 Series Symphony® Ordering Procedure
Exterior Rose
1220
Escutcheon Type
1226
Interior Rose
1221
Finish
CP
Lever/Knob
48
Handing
L
Finish
CP
Exterior Rose Type
Exterior Rose 1220
Exterior Blank Rose 1222
Exterior Fixed Rose 1224
Interior Rose Type
Interior Rose 1221
Interior Blank Rose 1223
Interior Fixed Rose 1225
Interior Rose to suit Daintree Privacy Adaptor 1321
Lever/Knob Type
20 53* 79
32 55 79B
40 59 80
41* 62 83
44 70 90
45 71 91
48* 74 94*
50 78 97
* Denotes handed levers
Handing
Right Handed R
Left Handed L
NB: Omit if non-handed
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Escutcheon Type (Esc.)
Oval Cylinder Esc. 1226
Turnknob Esc. 1227
Privacy Indicator Turnknob Esc. 1227P
Disabled Turn Esc. Left Hand 1227DTL
Disabled Turn Esc. Right Hand 1227DTR
Emergency Turn Esc. 1228
Privacy Indicator Emergency Turn Esc. 1228P
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Lockwood 1220 Symphony Furniture – Full Set Escutcheons
Ordering ProcedureSample part number 1220/1221/48LCP is made up of several sections. Choose your product by selecting an option from each section.
For example:
/ /
Exterior Rose
1220
Lever/Knob
48
Handing
L
Finish
CP
Lockwood 1220 Symphony Furniture – Half SetExample:
/
Choose one rose only, exterior or interior
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.31Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Designed for use with Lockwood 3570 Series Mortice Locks and Latches, as well as the Lockwood A5250 Tubular Latch. Square Rose Design Registered Australia/New Zealand.
May be used with Lockwood Daintree Series Privacy Adaptors.
Features and SpecificationsDimensions58mm x 58mm x 11.6mm
HandingA removable stop screw allows all symmetrically designed levers (e.g. Cadenza) to be handed on site. Levers of asymmetrical design (e.g. Veloce) cannot be reversed. Specify left or right handed when ordering.
MaterialsAll Lockwood roses and levers contained in the 1420 series are of solid brass construction.
FixingFully concealed on both sides.
Door Thickness33mm minimum for A5250 Latches and 32mm minimum for Lockwood 3570 Series Mortice Locks. Maximum door thickness 50mm. Refer to lockweb.com.au for information on fixing screw options for thicker doors.
Finishes Standard Satin Chrome Brushed SC
Non StandardArchitectural Bronze AB Architectural Bronze Unlaquered AU Antique Copper AC Chrome Plate CP Polished Brass Unlacquered BU Polished Brass PB Polyester Powdercoat PC Satin Brass SB Oil Rubbed Bronze ORB
1426
58mm
58mm
1420 1421 1424 14251422 1423
1427 1427P 1428 1428P1427DT*
1426
58mm
58mm
1420 1421 1424 14251422 1423
1427 1427P 1428 1428P1427DT*
58
11.6
Rose and Lever Compatibility Chart
Levers and Knob to Suit
Cylinder and Turn Escutcheons
Rose numbers marked red indicate no lever option
* Denotes handed levers
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 45 48*41*
53* 55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55A32 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
83
1420 Square Series Symphony® Rose Furniture
For detailed information regarding brass levers refer to page 3.100
Rose Door Furniture
3.32Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
1420 Square Series Symphony® Levers
Capella 50
Lever 70
Intermezzo 41
Veloce 53
Arpeggio 44
Lever 55
Sonata 45
Overture 59
Nocturne 48
Lever 32
Tempo 71Lever 62
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.33Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
1420 Square Series Symphony® Levers
Lever 79B
Lever 94
Lever 80
Chorus Line 97
Ving 74
Lever 83
Cadenza 78
Lever 90
Tenor 79
Lever 91
Rose Door Furniture
3.34Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
57
11.6
1427 Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your square door furniture with this brass turn for use in all snibbing applications. Features concealed fixing.
1426 Oval Cylinder EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionPractical, secure and pleasing to the eye, this brass escutcheon has an oval cylinder hole. Features concealed fixing.
1420 Square Series Symphony®
Cylinder and Turn Escutcheons
A range of escutcheons for the fitting of cylinders, turns and emergency turns is available in the same wide choice of metal finishes to complement all Symphony Square Rose Lever Furniture installations. Dimensions shown for cylinder escutcheon are consistent for the entire range.
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.35Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
1227DTCP
50 mm
11.5 mm
1227DTCP
1427DTCP1427DTCP
57 mm
10.8 mm
1367DTCP
50 mm
9.5 mm
1367DTCP
1377DTCP
50 mm
11.5 mm
1377DTCP
1427DT* Disabled Turnknob Escutcheon Designed for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your square door furniture with this brass escutcheon. For use in applications where easy access is required especially in a disabled environment.Features concealed fixing. * Specify Handing
1427P Privacy Indicator Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your square door furniture with this brass escutcheon. For use in applications where privacy turn knob access is required effectively and easily.Features concealed fixing.
1428P Privacy Indicator Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your square door furniture with this brass emergency release escutcheon. For use in indicating privacy applications. Features concealed fixing.
1428 Emergency Turn EscutcheonApplicationDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your square door furniture with this brass emergency release escutcheon. For use in privacy applications. Features concealed fixing.
1420 Square Series Symphony®
Cylinder and Turn Escutcheons
Rose Door Furniture
3.36Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
1420 Square Series Symphony® Ordering Procedure
Escutcheon Type
1426
Finish
CP
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Escutcheon Type (Esc.)
Oval Cylinder Esc. 1426
Turnknob Esc. 1427
Privacy Indicator Turnknob Esc. 1427P
Disabled Turn Esc. Left Hand 1427DTL
Disabled Turn Esc. Right Hand 1427DTR
Emergency Turn Esc. 1428
Privacy Indicator Emergency Turn Esc. 1428P
Escutcheons
Exterior Rose
1420
Interior Rose
1421
Lever/Knob
48
Handing
L
Finish
CP
Exterior Rose Type
Exterior Rose 1420
Exterior Blank Rose 1422
Exterior Fixed Rose 1424
Interior Rose Type
Interior Rose 1421
Interior Blank Rose 1423
Interior Fixed Rose 1425
Lever/Knob Type
20 53* 79
32 55 79B
40 59 80
41* 62 83
44 70 90
45 71 91
48* 74 94*
50 78 97
* Denotes handed levers
Handing
Right Handed R
Left Handed L
NB: Omit if non-handed
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Ordering ProcedureSample part number 1420/1221/48LCP is made up of several sections. Choose your product by selecting an option from each section.
For example: Lockwood 1420 Symphony Furniture – Full Set
/ /
Exterior Rose
1420
Lever/Knob
48
Handing
L
Finish
CP
Lockwood 1420 Symphony Furniture – Half SetExample:
/
Choose one rose only, exterior or interior
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.37Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Designed for use with Lockwood 3570 Series Mortice Locks and Latches, as well as the Lockwood A5250 Tubular Latch, this round rose has concealed fixing on external rose.
Features and SpecificationsDimensions65.5mm diameter x 11.6mm
HandingA removable stop screw allows all symmetrically designed levers (e.g. Cadenza) to be handed on site. Levers of asymmetrical design (e.g. Veloce) cannot be reversed. Specify left or right handed when ordering.
MaterialsAll Lockwood roses and levers contained in the 1360 series are of solid brass construction.
FixingRoses are designed to fit back to back. If outside rose is specified with concealed fixing, then the inside rose must be visible fixed. Roses numbered 1360, 1362, and 1364 are concealed fixed, roses numbered 1361, 1363 and 1365 are visible fixed.
Door Thickness33mm minimum for A5250 Latches and 32mm minimum for Lockwood 3570 Series Mortice Locks. Maximum door thickness 50mm. Refer to lockweb.com.au for information on fixing screw options for thicker doors.
Finishes StandardSatin Chrome Brushed SC
Non StandardArchitectural Bronze AB Architectural Bronze Unlaquered AU Antique Copper AC Chrome Plate CP Polished Brass Unlacquered BU Polished Brass PB Polyester Powdercoat PC Satin Brass SB Oil Rubbed Bronze ORB
Rose and Lever Compatibility Chart
Levers and Knobs to Suit
Cylinder and Turn Escutcheons
65.5 mm
1360 1361 1362 136513641363
50 mm
1366 1367 1367P 1368 1368P1367DT*
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 45 48*41*
53* 55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55A32 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
83
65.5 mm
1360 1361 1362 136513641363
50 mm
1366 1367 1367P 1368 1368P1367DT*
* Denotes handed levers
Rose numbers marked red indicate no lever option
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
1360 Series Rose Furniture
7.5
65.5
11.6
For detailed information regarding brass levers refer to page 3.100
Rose Door Furniture
3.38Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
1360 Series Levers and Knobs
Capella 50
Lever 70
Intermezzo 41
Veloce 53
Arpeggio 44
Lever 55
Sonata 45
Overture 59
Nocturne 48
Lever 32
Tempo 71Lever 62
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.39Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
1360 Series Levers and Knobs
Lever 79B
Lever 94
Lever 80
Chorus Line 97
Ving 74
Lever 83
Cadenza 78
Lever 90
Tenor 79
Lever 91
Knob 20 Knob 40
Rose Door Furniture
3.40Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
50*
10.5*
1367 Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass turn for ease of use in all snibbing applications.
1366 Oval Cylinder EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionPractical, secure and pleasing to the eye, this brass escutcheon has an oval cylinder hole and concealed grub screw fixing.
1360 Series Cylinder and Turn Escutcheons
Round escutcheons machined from solid brass designed to complement round rose brass door furniture such as the Lockwood 1360 Series. Dimensions shown for cylinder escutcheon are consistent for entire range.
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.41Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
1227DTCP
50 mm
11.5 mm
1227DTCP
1427DTCP1427DTCP
57 mm
10.8 mm
1367DTCP
50 mm
9.5 mm
1367DTCP
1377DTCP
50 mm
11.5 mm
1377DTCP
1367DT* Disabled Turnknob Escutcheon Designed for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass escutcheon. For use in applications where easy access is required especially in a disabled environment.
*Specify handing
1367P Privacy Indicator Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass escutcheon. For use in applications where privacy turnknob access is required.
1368P Privacy Indicator Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass emergency release escutcheon. For use in indicating privacy applications.
1368 Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass emergency release escutcheon for use in privacy applications.
1360 Series Cylinder and Turn Escutcheons
Rose Door Furniture
3.42Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
1360 Series Ordering Procedure
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Escutcheons
Exterior Rose
1360
Exterior Rose
1360
Escutcheon Type
1366
Interior Rose
1361
Finish
CP
Lever/Knob
48
Lever/Knob
48
Handing
L
Handing
L
Finish
CP
Finish
CP
Exterior Rose Type
Exterior Rose 1360
Exterior Blank Rose 1362
Exterior Fixed Rose 1364
Interior Rose Type
Interior Rose 1361
Interior Blank Rose 1363
Interior Fixed Rose 1365
Lever/Knob Type
20 53* 79
32 55 79B
40 59 80
41* 62 83
44 70 90
45 71 91
48* 74 94*
50 78 97
* Denotes handed levers
Handing
Right Handed R
Left Handed L
NB: Omit if non-handed
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Escutcheon Type (Esc.)
Oval Cylinder Esc. 1366
Turnknob Esc. 1367
Privacy Indicator Turnknob Esc. 1367P
Disabled Turn Esc. Left Hand 1367DTL
Disabled Turn Esc. Right Hand 1367DTR
Emergency Turn Esc. 1368
Privacy Indicator Emergency Turn Esc. 1368P
Lockwood 1360 Series Furniture – Half Set
Lockwood 1360 Series Furniture – Full Set
Example:
Ordering ProcedureSample part number 1360/48LCP is made up of several sections. Choose your product by selecting an option from each section.
For example:
/
/
/
Choose one rose only, exterior or interior
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.43Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Designed for use with the Lockwood 3570 Series Mortice Latch and the Lockwood A5250 Tubular Latch.
Features and SpecificationsDimensions62.5mm diameter x 11.6mm
HandingA removable stop screw allows all symmetrically designed levers (e.g. Cadenza) to be handed on site. Levers of asymmetrical design (e.g. Veloce) cannot be reversed. Specify left or right handed when ordering.
MaterialsAll Lockwood roses and levers contained in the 1370 series are of solid brass construction.
FixingRoses are designed to fit back to back. If outside rose is specified with concealed fixing, then the inside rose must be visible fixed. Roses numbered 1370, 1372 and 1374 are concealed fixed, roses numbered 1371, 1373 and 1375 are visible fixed.
Door Thickness33mm minimum for A5250 Latches and 32mm minimum for Lockwood 3570 Series Mortice Locks. Maximum door thickness 50mm. Refer to lockweb.com.au for information on fixing screw options for thicker doors.
Finishes StandardSatin Chrome Brushed SC
Non StandardArchitectural Bronze AB Architectural Bronze Unlaquered AU Antique Copper AC Chrome Plate CP Polished Brass Unlacquered BU Polished Brass PB Polyester Powdercoat PC Satin Brass SB Oil Rubbed Bronze ORB
62.5
11.6
Rose and Lever Compatibility Chart
Levers and Knobs to Suit
Cylinder and Turn Escutcheons
62.5 mm
1370 1371 1372 137513741373
50 mm
1376 1377 1377P 1378 1378P1377DT*
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
00
7059 62
20 32 44 45 48*41*
53* 55
40
61*
Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
5532 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78
79B 90 91 94*
80 97
74
78
79
79 79B 90 91 94*
62.5 mm
1370 1371 1372 137513741373
50 mm
1376 1377 1377P 1378 1378P1377DT*
* Denotes handed levers
Rose numbers marked red indicate no lever option
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
00
70 80 83
42*
59
49
60
20 32
9087
4443
97
45 48*41* 51*50*
50*
50*
53*
52*
54*
40
56* 57 61* 69
For compatility chart
7059 62
20 32 44 45 48*41*
53* 55
40Other brass only
00
70 80 83
42*
59
49
60
32
9087 97
45 48*41* 51* 53*52* 54* 56*
57 61*
Short backset brass
00
7062
80
55A32 44 45 48*41* 53*
61*
97
59
Symphony only
71
71
71
74 78 79B
90 91 94*
80 97
74 78
79
79 79B 90 91 94*
83
83
1370 Series Rose Furniture
For detailed information regarding brass levers refer to page 3.100
Rose Door Furniture
3.44Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
1370 Series Levers and Knobs
Capella 50
Lever 70
Intermezzo 41
Veloce 53
Arpeggio 44
Lever 55
Sonata 45
Overture 59
Nocturne 48
Lever 32
Tempo 71Lever 62
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.45Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Lever 79B
Lever 94
Lever 80
Chorus Line 97
Ving 74
Lever 83
Cadenza 78
Lever 90
Tenor 79
Lever 91
1370 Series Levers and Knobs
Knob 20 Knob 40
Rose Door Furniture
3.46Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Round Brass EscutcheonRound escutcheons machined from solid brass designed to complement round rose brass door furniture such as the Lockwood 1370 Series. Dimensions shown for cylinder escutcheon are consistent for entire range.
50*
10.5*
1377 Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass turn for use in all snibbing applications.
1376 Oval Cylinder EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionPractical, secure and pleasing to the eye, this brass escutcheon has an oval cylinder hole and concealed grub screw fixing.
1370 Series Cylinder and Turn Escutcheons
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.47Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
1227DTCP
50 mm
11.5 mm
1227DTCP
1427DTCP1427DTCP
57 mm
10.8 mm
1367DTCP
50 mm
9.5 mm
1367DTCP
1377DTCP
50 mm
11.5 mm
1377DTCP
1377DT* Disabled Turnknob Escutcheon Designed for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass escutcheon. For use in applications where easy access is required especially in a disabled environment.
*Specify handing
1377P Privacy Indicator Turnknob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass escutcheon. For use in applications where privacy turnknob access is required.
1378P Privacy Indicator Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass emergency release escutcheon. For use in indicating privacy applications.
1378 Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionComplement your round door furniture with this brass emergency release escutcheon for use in privacy applications.
1370 Series Cylinder and Turn Escutcheons
Rose Door Furniture
3.48Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Ordering ProcedureSample part number 1370/1371/48LCP is made up of several sections. Choose your product by selecting an option from each section.
For example: Lockwood 1370 Series Furniture – Full Set
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Escutcheons
Exterior Rose
1370
Exterior Rose
1370
Escutcheon Type
1376
Interior Rose
1371
Finish
CP
Lever/Knob
48
Lever/Knob
48
Handing
L
Handing
L
Finish
CP
Finish
CP
Exterior Rose Type
Exterior Rose 1370
Exterior Blank Rose 1372
Exterior Fixed Rose 1374
Interior Rose Type
Interior Rose 1371
Interior Blank Rose 1373
Interior Fixed Rose 1375
Lever/Knob Type
20 53* 79
32 55 79B
40 59 80
41* 62 83
44 70 90
45 71 91
48* 74 94*
50 78 97
* Denotes handed levers
Handing
Right Handed R
Left Handed L
NB: Omit if non-handed
Finish
Chrome Plate CP
Satin Chrome Brushed SC
Polished Brass PB
Escutcheon Type (Esc.)
Oval Cylinder Esc. 1376
Turnknob Esc. 1377
Privacy Indicator Turnknob Esc. 1377P
Disabled Turn Esc. Left Hand 1377DTL
Disabled Turn Esc. Right Hand 1377DTR
Emergency Turn Esc. 1378
Privacy Indicator Emergency Turn Esc. 1378P
Lockwood 1370 Series Furniture – Half SetExample:
/
/
/
Choose one rose only, exterior or interior
1370 Series Ordering Procedure
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.49Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
2 355
SS/Brass Aluminium
The 260 Series Door Furniture has a 55mm round rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches and with A5250 Tubular Latches.
Features and SpecificationsDimensions55 x 3mm – aluminium 55 x 2mm – stainless steel and brass
Materials
Aluminium, stainless steel or brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardNatural Anodised Aluminium NT Stainless Steel SS
Non Standard Polished Stainless Steel PSPowdercoat PCMarine Grade MGPolished Brass PB
Rose Furniture 55mm Diameter
Levers and Knob to Suit
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
280 281 286282 287
260 Operable 262 Blank261 Operable 264 Fixed 265 Fixed263 Blank
Escutcheon Furniture 50mm Diameter
20 89698*8 *Aluminium Only
Brass levers and knobs also available on stainless steel and brass roses refer to page 3.100
260 Series Round Rose Furniture
Rose Door Furniture
3.50Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
The 260SQ Series Door Furniture has a 55mm x 2mm square rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches and with A5250 Tubular Latches.
Features and SpecificationsDimensions55 x 55 x 2mm – stainless steel
MaterialsStainless steel only.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
Standard FinishStainless Steel SS
Square Furniture 55 x 55mm
Levers and Knob to Suit
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
280 281 286282 287
260 Operable 262 Blank261 Operable 264 Fixed 265 Fixed263 Blank
Square Escutcheon Furniture 50 x 50mm
20 89698*8
Brass levers and knobs also available refer to page 3.100
2 355
Stainless Steel
20 89698*8
260SQ Series Square Rose Furniture
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.51Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Exterior Rose Type
260
Interior Rose Type
261
Lever/ Knob
96
Rose Shape
SQ
Handing Finish
SS
Plate Type
Exterior Rose Type 260
Exterior Round Blank Rose 262
Exterior Round Rose – Fixed Lever 264
Plate Function
Interior Round Rose 261
Interior Round Blank Rose 263
Interior Round Rose – Fixed Lever 265
Rose Shape
Round –
Square SQ
Lever/ Knob Type
Brass Levers and Knobs
20 53* 7932 55 79B40 59 8041* 62 8344 70 9045 71 9148* 74 94*50 78 97
Stainless Steel Levers
96 98
Aluminium Levers/Knobs
20 88 9698
* Denotes handed levers
Handing
Left Handed LRight Handed RNon-Handed –
Finish
Stainless Steel Finishes
Satin Stainless Steel SS
Polished Stainless Steel PS
Powdercoat PC
Marine Grade MG
Aluminium Finishes
Natural Anodised NT
Brass Finishes
Polished Brass PB
260 Series
Ordering ProcedureSample part number 260/261/SQ96SS is made up of several sections. Choose your product by selecting an option from each section.
For example:
/ /
260 Series Ordering Procedure
Rose Door Furniture
3.52Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
The Lockwood Ovation Series offers a selection of stylish and durable investment cast and hollow stainless steel levers on round roses.
ApplicationSuitable for use in commercial and residential buildings.
Designed and manufactured for use with Lockwood Synergy 3570 Series Mortice Locks and A5250 Tubular Latch.
Features and SpecificationsDimensions55mm diameter x 12mm
HandingA removable stop screw allows all symmetrically designed levers to be handed on site.
Materials304 stainless steel.
FixingRoses are designed to fit back to back and fixings are concealed by the use of a screw on outer rose.
Door Thickness
• 32mm minimum for Lockwood 3570 Series Mortice Locks
• Maximum door thickness 45mm
• Refer to lockweb.com.au for information on screw and spindle options for thicker doors
Standard Finish
Satin Stainless Steel SS
Ovation® Series Furniture
ANTI-CORROSION
FIRE RATED
Accessories
Roses
46.5 mm
3226
55 mm
3220
3226C 3227 3227P 3228 3228P 3229 3231 3232
3221 3224 3225
3227DT
3220 3221 3224 3225
Levers to Suit
08 11 20 54 27 28*
* Denotes handed levers
For detailed information regarding brass levers refer to page 3.100
52
11.610
3870 55
5
23 55 52
11.6
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.53Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
08 11 20 54 27 28*
126
117
19
53F
12
136115.5
19
60F
12
135
126
19
52F
12
135
58
12
19
135
58
12
19
Ovation® Series Levers
Cuji® – H08
DimensionsLength 126mm
Projection 65mm
Finger clearance 46mm
Nusa® – H20
DimensionsLength 136mm
Projection 72mm
Finger clearance 53mm
Dema® – H54
DimensionsLength 135mm
Projection 64mm
Finger clearance 45mm
Tulu® – H11
DimensionsLength 135mm
Projection 70mm
Finger clearance 51mm
23 55
Rose Door Furniture
3.54Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
128
120
2448
F
12
120
109
9.539F
12
Aria® – S27
DimensionsLength 120mm
Projection 51mm
Finger clearance 37mm
Myko® – S28
DimensionsLength 128mm
Projection 60mm
Finger clearance 36mm
* This lever has an asymmetrical design and therefore must be handed.
124
50
22.2
103
F
12
Lever - S55
DimensionsLength 124mm
Projection 62.5mm
Finger clearance 40.3mm
Lever - S23
DimensionsLength 125mm
Projection 60mm
Finger clearance 48mm
25
22
125
12
F
115
48
Ovation® Series Levers
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.55Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
52
11.6
11.6
52
Ovation® Series Accessories
3226 Oval Cylinder Escutcheon
Dimensions52mm x 11.6mm
Designed for use with Lockwood 3570 Series
Mortice Locks.
3226E Cylinder Escutcheon
Dimensions52mm x 11.6mm
Designed for use with Lockwood Defender
Series Mortice Locks.
3228 Emergency Turn
Dimensions52mm x 11.6mm
Designed for use with Lockwood 3570 Series
Mortice Locks and A6208 Tubular Bolt.
3290 Privacy AdaptorThe 3290 Privacy Adaptor has a patented built in clutching mechanism which allows the engaged mode to be overridden by use of specified force applied in a single downward action on the lever.
When safety, privacy and convenience is required the 3290 Privacy Adaptor is the perfect solution.
10
3870 55
5
52
11.6
3227 Turn
Dimensions52mm x 11.6mm
Designed for use with Lockwood 3570 Series
Mortice Locks and A6208 Tubular Bolt.
52
11.6
Rose Door Furniture
3.56Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Exterior Rose Type
3220
Internal Rose Type
3221
Lever Type
H08
Handing
--
Finish
SS
Exterior Rose Type
Exterior Rose 3220
Exterior Fixed Rose 3224
Interior Rose Type
Interior Rose 3221
Interior Blank Rose 3225
Lever Type
Cuji® H08
Tulu® H11
Nusa® H20
Dema® H54
Lever S23
Aria® S27
Myko®* S28
Lever S55
* Specify handing
Handing
Left Handed L
Right Handed R
NB: Omit if non-handed
Finish
Satin Stainless Steel SS
Ordering Procedure - Ovation SeriesSample part number 3220/3221/H08SS is made up of several sections. Choose your product by selecting an option from each section.
For example:
/ /
Ovation® Series Ordering Procedure
EscutcheonType
3226
Finish
SS
Escutcheon Rose Type
Oval Cylinder 3226 Escutcheon
Euro Profile Cylinder 3226E
Turn Knob Escutcheon 3227
Emergency Turn 3228 Escutcheon
Privacy Adaptor 3290
Finish
Satin Stainless Steel SS
Exterior Rose
3220
Lever/Knob
H08
Handing
L
Finish
SS
Lockwood 3220 Ovation Series – Half SetExample:
/
Choose one rose only, exterior or interior and required lever
Ordering Procedure - AccessoriesSample part number 3226SS is made up of several sections. Choose your product by selecting an option from each section.
For example:
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.57Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Summit® #L1 Hakea® #28
Gidgee® #37
Element™ #L3 Saltbush® #34
Aria® #27
Spire® #L2
Mulga® #36
Acacia® #29
Glide™ #L4
Aria® #27
Saltbush® #34
Summit® #L1Hakea® #28
Gidgee® #37
Spire® #L2Acacia® #29
Element™ #L3
Glide™ #L4 Mulga® #36
Designed and manufactured in Australia the Daintree Series of door furniture reflects the best in quality combined with cultured designs.
The Daintree Series was produced to meet the stringent aesthetic requirements of the residential market, while conforming to the ever increasing need for quality in the semi-commercial building segments.
Daintree® Series Overview
Rose Door Furniture
3.58Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Daintree® Series Round Rose Furniture
All Lockwood Daintree Door Furniture features concealed fixing and is designed for use with Lockwood 3570 Series Mortice Locks and Latches, as well as the Lockwood A5250 Tubular Latch.
Features and SpecificationsDimensions55mm diameter x 12.5mm
HandingAll levers are symmetrically designed allowing on site handing via a removable stop screw.
MaterialsAll Daintree roses and levers are of zinc diecast construction.
FixingFully concealed on both sides.
Door Thickness33mm minimum for A5250 Latches and 32mm minimum for Lockwood 3570 Series Mortice Locks. Maximum door thickness 45mm. Refer to lockweb.com.au for information on fixing screw options for thicker doors.
Standard Finishes Satin Chrome Brushed SC Chrome Plate CP Gold GLD Polyester Powdercoat PPC
55
12.5
46.5 mm
1226
53 mm
3880
1227 1227P 1228 1228P
1231 1232
3881 3884
1227DT*
Roses
Levers to Suit
Accessories
S2 HIGH SECURITY DURABILITY2
For detailed information regarding diecast levers refer to page 3.106
28 29 27 L2
34 L1 36 37 L4
L3
50
12.510
3870 55
5
3886 3886E 389038883887
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.59Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
3886 Oval Cylinder EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionPractical, secure and pleasing to the eye, this escutcheon has an oval cylinder hole. Features concealed fixing. 3886E Euro Cylinder EscutcheonDesigned for use with European Mortice Locks.
DescriptionThis Euro Cylinder Escutcheon provides security in an unobtrusive design featuring concealed fixing.
3887 Turn Knob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks and A6208 Tubular Privacy Bolt.
DescriptionComplement your round door furniture with this turn for use in all snibbing applications.
3888 Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks and A6208 Tubular Privacy Bolt.
DescriptionComplement your round door furniture with this emergency release escutcheon. For use in applications where privacy emergency release access is required. Features concealed fixing.
3890 Privacy Adaptor The 3890 Privacy Adaptor has a patented built in clutching mechanism which allows the engaged mode to be overridden by use of specified force applied in a single downward action on the lever. This will allow entry in an emergency situation without the use of any type of tool.
The privacy adaptor can be installed onto any existing Daintree lever set and standard A5250 Tubular Latch.
50
12.5
Daintree® Series Round Cylinder and Turn Escutcheons
10
3870 55
5
Rose Door Furniture
3.60Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
3891 Rose SpacerDescriptionThe rose spacer enables the standard Daintree lever set to be retrofitted onto existing 54mm holes.
Rose Trim 3880/110DescriptionRose trim to suit all Daintree Series Door Furniture.
Escutcheon Trim 3886/110DescriptionRose trim to suit all Daintree Series Door Furniture, Escutcheons and Turns.
A6208 Privacy BoltDescriptionTubular privacy latch for use with tail bar and spindle turn applications.
FinishesPolished Brass PB Satin Stainless Steel SSS Polished Stainless Steel PSS
A5250 Tubular LatchDescriptionTubular latch designed for use with horizontal through fixing door furniture.
FinishesPolished Brass PB Satin Stainless Steel SSS Polished Stainless Steel PSS
* A6208 & A5250 suit round and square roses.
59
3
12.5
55
12.5
50
19.5
83 10
60
14 5740
25
574311
25
19.5
78.8 11.5
60
Daintree® Series Round Cylinder and Turn Escutcheons
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.61Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
EscutcheonType
3888
Finish
CP
Escutcheon Rose Type
Oval Cylinder 3886 Escutcheon
Euro Cylinder 3886E Escutcheon
Turn Knob Escutcheon 3887
Emergency Turn 3888 Escutcheon
Privacy Adaptor Finish
Chrome Plate CP
Gold GLD
Polyester Powdercoat PPC
Satin Chrome Brushed SC
Satin Chrome Pearl SP
Ordering Procedure - AccessoriesSample part number 3888CP is made up of several sections. Choose your product by selecting an option from each section.For example:
Exterior Rose Type
3880
Internal Rose Type
3881
Lever Type
L1
Finish
CP
Exterior Rose Type
Exterior Rose 3880
Exterior Fixed Lever 3884
Interior Rose Type
Interior Rose 3881
Lever Type
Summit® L1
Spire® L2
ElementTM L3
GlideTM L4
Aria® 27
Hakea® 28
Acacia® 29
Saltbush® 34
Mulga® 36
Gidgee® 37
Finish
Chrome Plate CP
Gold GLD
Polyester Powdercoat PPC
Satin Chrome Brushed SC
Satin Chrome Pearl SP
Ordering Procedure - 3880 SeriesSample part number 3880/3881/L1CP is made up of several sections. Choose your product by selecting an option from each section.
For example:
/ /
Daintree® Series Ordering Procedures
Exterior Rose
3880
Lever/Knob
L1
Finish
CP
Daintree Series Furniture – Half SetExample:
/
Choose external rose only
Rose Door Furniture
3.62Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Daintree® Series Square Rose Furniture
All Lockwood Daintree Door Furniture features concealed fixing and is designed for use with Lockwood 3570 Series Mortice Locks and Latches, as well as the Lockwood A5250 Tubular Latch.
Features and SpecificationsDimensions55mm diameter x 12.5mm
HandingAll levers are symmetrically designed allowing on site handing via a removable stop screw.
MaterialsAll Daintree roses and levers are of zinc diecast construction.
FixingFully concealed on both sides.
Door Thickness33mm minimum for A5250 Latches and 32mm minimum for Lockwood 3570 Series Mortice Locks. Maximum door thickness 45mm. Refer to lockweb.com.au for information on fixing screw options for thicker doors.
Standard Finishes Satin Chrome Brushed SC Chrome Plate CP Gold GLD Polyester Powdercoat PPC
Roses
Levers to Suit
Accessories
For detailed information regarding diecast levers refer to page 3.106
28 29 27 L2
34 L1 36 37 L4
L3
57
12.5
10
3870 55
5
1426
58mm
58mm
1420 1421 1425
1427 1427P 1428 1428P1427DT*
58
11.6
S2 HIGH SECURITY DURABILITY2
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.63Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
3686 Oval Cylinder EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks.
DescriptionPractical, secure and pleasing to the eye, this escutcheon has an oval cylinder hole. Features concealed fixing.
3686E Euro Cylinder EscutcheonDesigned for use with European Mortice Locks.
DescriptionThis Euro Cylinder Escutcheon provides security in an unobtrusive design. Featuring concealed fixing.
3687 Turn Knob EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks and A6208 Tubular Privacy Bolt.
DescriptionComplement your square door furniture with this turn for use in all snibbing applications.Features concealed fixing.
3688 Emergency Turn EscutcheonDesigned for use with Lockwood 3570 Series Mortice Locks and A6208 Tubular Privacy Bolt.
DescriptionComplement your square door furniture with this emergency release escutcheon. For use in applications where emergency release is required, effectively and easily. Features concealed fixing.
57
12.5
57
12.5
57
12.5
57
12.5
Daintree® Series Square Cylinder and Turn Escutcheons
Rose Door Furniture
3.64Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
3691 Rose SpacerDescriptionThe rose spacer enables the standard Daintree lever set to be retrofitted onto existing 54mm holes.
Rose Trim 3680/110DescriptionRose trim to suit all Daintree series door furniture and escutcheon hardware.
Rose Trim 3686/110DescriptionRose trim to suit all Daintree series door furniture and escutcheon hardware.
12.5
57
57
3
12.5
57
Daintree® Series Square Cylinder and Turn Escutcheons
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.65Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Daintree® Series Ordering Procedures
EscutcheonType
3688
Finish
CP
Escutcheon Rose Type
Oval Cylinder 3686 Escutcheon
Euro Cylinder 3686E Escutcheon
Turn Knob Escutcheon 3687
Emergency Turn 3688 Escutcheon
Finish
Chrome Plate CP
Gold GLD
Polyester Powdercoat PPC
Satin Chrome Brushed SC
Satin Chrome Pearl SP
Ordering Procedure - AccessoriesSample part number 3688CP is made up of several sections. Choose your product by selecting an option from each section.For example:
Exterior Rose Type
3680
Internal Rose Type
3681
Lever Type
L3
Finish
SC
Exterior Rose Type
Exterior Rose 3680
Exterior Fixed Lever 3684
Interior Rose Type
Interior Rose 3681
Lever Type
Summit® L1
Spire® L2
ElementTM L3
GlideTM L4
Aria® 27
Hakea® 28
Acacia® 29
Saltbush® 34
Mulga® 36
Gidgee® 37
Finish
Chrome Plate CP
Gold GLD
Polyester Powdercoat PPC
Satin Chrome Brushed SC
Satin Chrome Pearl SP
Ordering Procedure - 3880 SeriesSample part number 3886/3681/L3SC is made up of several sections. Choose your product by selecting an option from each section.
For example:
/ /
Exterior Rose
3680
Lever/Knob
L1
Finish
CP
Daintree Series Furniture – Half Set
/
Choose external rose only
Example:
Rose Door Furniture
3.66Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Velocity Door Furniture offers home owners and builders a contemporary collection of levers on rose for use within a residential environment.
Designed in Australia, the Velocity series encompasses the robust design and product quality that has become synonymous with Lockwood. An attractive yet unobtrusive rose design complemented with six modern lever designs. The Velocity Series captures the aesthetic tone of the residential market providing style whilst maintaining utilitarian desire.
With a design that transcends the basic functional and aesthetic requirements of residential hardware, the Velocity series sets a new benchmark in ease of installation.
The Velocity Series includes passage sets for connecting doors, privacy sets for bathroom and toilet doors and dummy half sets for use on cupboard and wardrobe doors where a consistent styling is desired.
Velocity levers styles are common to the Lockwood Nexion and Lockwood Palladium ranges, facilitating a uniform design aesthetic throughout the home. It is also the perfect complement to the uncompromising Paradigm 005 deadbolt.
Velocity® Series Overview
NewPRODUCT
Super Fast Installation
Align
Twist
Tighten
Through the simple twist and tighten fixing action the Velocity Series turns the rhetoric of ease of installation into reality.
The frustration of fiddling with small parts or misplacing them during installation is a thing of the past as Velocity lever sets are supplied pre-assembled so there are no loose screws or spindles.
Screws align through the rose removing the need to locate them blind through the door. A twist and a quick tighten of screws and the levers are installed.
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.67Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
The Velocity Series is a stylish range of door furniture suitable for use in residential dwellings. Designed to suit common door preparations in the Australian market, Velocity is ideal for both new and retrofit applications.
Features and Specifications
• All fixings are concealed beneath a removable rose trim providing a crisp and clean presentation desired by the discerning home owner
• Simple twist and tighten fixing method and lever set pre-assembly allows for super easy and super fast installation
• Available in a choice of six lever designs and two finishes
• The rose fits 50mm or 54mm diameter holes making is suitable for retrofit and common door preparations
• Designed in Australia for the specific needs of the Australian market
MaterialsAll Velocity levers and roses are made from solid zinc die-cast.
LatchesPassage sets are available both with and without a 60mm backset tubular latch.
Privacy sets are supplied with a 60mm backset privacy latch which includes an activating pin for the inside of the door and an external emergency release function. The latch is automatically released when the internal handle is operated and is easily adapted for both open in and open out applications.
All latches are supplied with industry standard “D” strikes.
Rose Dimensions 63mm by 12.5mm
Door ThicknessHinged doors 32mm to 45mm
Standard FinishesSatin Chrome Pearl SP Chrome Plate CP
Velocity® Series Door Furniture
Rose Door Furniture
3.68Lockwood Product Catalogue 1300 LOCK UP (1300 562 587) lockweb.com.au
Velocity® Series Levers
Summit® – L1
DimensionsLength 122mm
Projection 56.5mm
F = Finger clearance 34.5mm
12.5
2244
13
111
122
Spire® – L2
DimensionsLength 124mm
Projection 57.5mm
F = Finger clearance 44.5mm
1345
15
112
124
12.5
Element™ – L3
DimensionsLength 122mm
Projection 54.5mm
F = Finger clearance 47.5mm
7
42F
23
122
12.5
12.5
4423
F
8
121
Glide™ – L4
DimensionsLength 121mm
Projection 56.5mm
F = Finger clearance 33.5mm
7
42F
23
122
12.5
12.5
4423
F
8
121
Hakea® – 28
DimensionsLength 121mm
Projection 63mm
F = Finger clearance 43mm
Saltbush® – 34
DimensionsLength 120mm
Projection 64mm
F = Finger clearance 43.5mm
50.6
13.4
121.4
42.9
21.8
51.5
12.5
7.0
120.0
43.6
28.4
Rose Door FurnitureD
oor Furniture and General Hardw
are
3.69Lockwood Product Catalogue
1300 LOCK UP (1300 562 587) lockweb.com.au
Velocity® Series Ordering Procedure
Product
Velocity VEL
Function
Passage 1
Privacy 2
Dummy Half 3
Lever
Summit L1
Spire L2
Element L3
Glide L4
Hakea 28
Saltbush 34
Square end face plate –
No latch (passage only) NL
Finish
Satin Chrome Pearl SP
Chrome Plate CP
Packaging
Trade –Display DP
Ordering Procedure Sample part number VEL1/L1SP is made up of several sections. Choose your product by selecting an option from each section.
For example:
/
Product
VEL
Function
1
Lever
L1
Latch Finish
SP
Packaging
Latch
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience
Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America.
As the world’s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market.
Australia 1300 LOCK UP (1300 562 587) lockweb.com.au
New Zealand +64 9415 7111 assaabloy.co.nz
ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2010
ASSA ABLOY Australia Pty Ltd 235 Huntingdale Road Oakleigh, Victoria, 3166 Australia
ASSA ABLOY New Zealand Ltd 6 Armstrong RoadAlbany, North Shore City, 0632New Zealand