Date post: | 06-Feb-2018 |
Category: |
Documents |
Upload: | phamkhuong |
View: | 251 times |
Download: | 5 times |
Products Media No. 4236
Rossi Gear Reducers,Gearmotors and Motors
Product Overview
Habasit– Solutions in motion
2Contents
Introduction 3
Applications 5
Worm and coaxial gear reducers and gearmotors 6
Planetary, parallel and right angle shaft gears 7
Industry gears, drive units and motion controls SR 8
Motion controls SM series and motors 9
HyCLEAN gears for corrosive, aseptic environments 10
The Habasit solution 11
Contacts 12
Product liability, application considerationsIf the proper selection and application of Habasit and Rossi products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer. All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifi cations and changes within a short time without prior notice. BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES’ CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES.
3
Comprehensive belting solutionsHabasit is the world’s leading manufacturer of power transmission and conveyor belts. Our clients select from the broadest range of fabric-based belts, plastic modular belts and power transmission belts worldwide. By complementing these with top gear reducers and motors, we deliver comprehensive solutions for every application.
Your solutions partnerTo ensure the highest quality, and most robust and reliable gear reducers and motors even for complex and diffi cult applications, Habasit selected Rossi as our solutions partner in 2004. We integrated Rossi fully into the Habasit Group in 2009 by taking a 100% shareholding, thus giving you the benefi t of a single partner for your entire solution.
Proven international leadershipRossi of Modena, Italy, is an international leader in the design and production of gear reducers, gearmotors and electric motors. With Rossi Habasit offers one of the most comprehensive product ranges on the market. Always a step ahead, over the past 50 years Rossi has pioneered several solutions – including universal mounting and upgraded modular components – that are now benchmarks in the power transmission fi eld.
Introduction
Quality, reliability – and a 3-year warrantyEvery product designed and manufactured by Rossi delivers the highest levels of quality, reliability and precision, and carries a 3-year warranty. We refer to www.rossi-group.com (select services/warranty) for further important information.
Global service networkThrough Habasit’s international network, Rossi products are available and supported worldwide. Clients receive expert technical support and deliveries of spares (components and fi nished products) within 24 hours. Proposals, data sheets and dimensional drawings also arrive within 24 hours. Technical manuals, assembly and maintenance guides, and 3D CAD drawings, can be downloaded from www.rossi-group.com.
4
5Applications
Fields of applicationRossi products are used across a broad range of applications. Almost every industrial plant and machine operating today needs power transmission. Thanks to its extensive product range, Rossi serves customers in a wide variety of industries, including:• Material handling/cranes• Automotive• Packaging/manufacturing • Food/beverage• Paper/wood • Leather/textile • Wind energy• Iron/steel • Mining/tunnelling• Cement/ceramic • Chemicals/rubber/plastics • Civil construction/building• Sewage and waste treatment
6Worm and coaxial gear reducers and gearmotors
Worm gear reducers and gearmotors A series
Size 14 sizes (32 ... 250)
Power P1 0.09 ... 55 kW
Nominal torque MN2 ≤ 19,000 Nm
Transmission ratio iN 7 ... 16,000
Worm gearmotors STANDARDFIT AS series
Size 6 sizes (118 ... 742)
Power P1 0.09 ... 5.5 kW
Nominal torque MN2 ≤ 670 Nm
Transmission ratio iN 6 ... 75
Coaxial gear reducers and gearmotors E series
Size 16 sizes (32 ... 180)
Power P1 0.09 ... 75 kW
Nominal torque MN2 ≤ 10,000 Nm
Transmission ratio iN 4 ... 6,300
Coaxial gearmotors STANDARDFIT ES series
Size 8 sizes (0 ... 7)
Power P1 0.09 ... 11 kW
Nominal torque MN2 ≤ 900 Nm
Transmission ratio iN 4 ... 200
7Planetary, parallel and right angle shaft gears
Planetary gearmotors (coaxial and right angle) EP series
Size 14 sizes (001…085)
Power P1 0.18 … 90 kW
Nominal torque MN2 9 … 85,000 Nm
Transmission ratio iN 9 ... 3,000 (coax)
iN 9 ... 2,500 (right angle)
Slewing drives EPS
Size 13 sizes (100 … 10,000)
Nominal torque MN2 1,500 … 125,000 Nm
Transmission ratio iN 50 … 1,000
Wind drives – yaw and pitch EPW
Size 15 sizes (100 … 10,000)
Nominal torque MN2 1,600 … 125,000 Nm
Transmission ratio iN 42.5 … 3,150
Parallel and right angle shaft gear reducers and gearmotors G series (standard and long)
Size 18 sizes (40 ... 360)
Power P1 0.09 ... 160 kW
Nominal torque MN2 ≤ 71,000 Nm
Transmission ratio iN 2.5 ... 12,500
Parallel and right angle shaft gear reducers and gearmotors for extruders GX series
Size 16 sizes (100 ... 451)
Power PN2 ≤ 1,710 kW
Nominal torque MN2 ≤ 132,200 Nm
Transmission ratio iN 6.3 ... 28
8
Worm, coaxial, parallel, and right angle shaft servo gears without motor SR series
Worm 7 sizes (32 ... 81)
Accelerating torque MA2 36 … 747 Nm
Transmission ratio i 7 … 239
Coaxial 11 sizes (32 … 101)
Accelerating torque MA2 31.5 … 2,000 Nm
Transmission ratio i 4 … 118
Parallel 8 sizes (40 … 125)
Accelerating torque MA2 64 … 3,000 Nm
Transmission ratio i 6.41 … 110
Right angle 8 sizes (40 … 125)
Accelerating torque MA2 66 … 3,000 Nm
Transmission ratio i 6 … 124
Worm Coaxial Parallel
Industry gears, drive units and motion controls SR
Industry parallel shaft gear reducers H series
Size 10 sizes (400 ... 631)
Nominal power PN2 16 ... 3,650 kW
Nominal torque MN2 ≤ 400,000 Nm
Transmission ratio iN 8 ... 315
Drive units on swing base RE series
Gear reducer size 140 ... 631
Motor size 132 ... 400
Nominal torque MN2 ≤ 400,000 Nm
Right angle shaft with coupling Right angle
9Motion controls SM series and motors
Low backlash planetary gears without motor (coaxial) SM series
Size 5 sizes (57 ... 181)
Nominal torque MN2 ≤ 1,200 Nm
Accelerating torque MA2 ≤ 1,750 Nm
Emergency torque ME2 ≤ 2,800 Nm
Transmission ratio i 3 ... 50
Low backlash planetary gears without motor (right angle shaft) SM series
Size 3 sizes (84 ... 143)
Nominal torque MN2 ≤ 418 Nm
Accelerating torque MA2 ≤ 698 Nm
Emergency torque ME2 ≤ 1,250 Nm
Transmission ratio i 3.4 ... 50
Asynchronous three-phase standard and brake motors TX series (IE2-IE3)
Size 63 ... 280
Power PN 0.06 ... 90 kW
Polarity 2, 4, 6, 8 poles
Heavy duty roller table motors S series
Size 132 ... 250
Peak torque polarity Mk ≤ 1,670 Nm
Polarity 4, 6 poles
10HyCLEAN gears for corrosive, aseptic environments
HyCLEAN GUARD protection
Coating type HC1 - HC2
Protection degree IP55, IP66
Complying with USDA
HyCLEAN SHIELD protection
Coating type HC3 - HC4
Protection degree IP66, IP68
Complying with NSF
11The Habasit solution
Customers first At Habasit we understand that our success depends on your success. This is why we offer solutions, not just products; partnership, not just sales.Since our foundation in 1946, Habasit has brought this understanding of customer needs to life every day and for every application. That’s why we’re the No. 1 in belting today. Worldwide.Learn more on www.habasit.com
Committed to innovationHabasit is strongly committed to the continuous development of innovative, value-added solutions. Over 3% of our staff are dedicated exclusively to R&D, and our annual investment in this area exceeds 8% of turnover.
Certified for qualityWe deliver the highest quality standards not only in our products and solutions, but also in our employees’ daily work processes. Habasit AG is certified according to ISO 9001:2000.
Worldwide leading product range Habasit offers the largest selection of belting, conveying, processing and complementary products in the industry. Our response to any request is nothing less than a specific, tailor-made solution.
Fabric based conveyor and processing beltsHabaFLOW®
Plastic modular beltsHabasitLINK®/KVP®
Power transmission belts HabaDRIVE®
Timing beltsHabaSYNC®
Chains (slat and conveyor chains)HabaCHAIN®
Profiles, Guides, Wear strips HabiPLAST®
Machine tapes
Seamless belts
Round belts
Fabrication tools (joining tools)
GearmotorsElectric motorsMotion control
Positive drive conveyor and processing beltsHabasit CleandriveTM
HeadquartersHabasit AG Römerstrasse 1CH-4153 Reinach, Switzerland Phone +41 61 715 15 15Fax +41 61 715 15 55E-mail [email protected] www.habasit.com
Registered trademarks Copyright Habasit AGSubject to alterationsPrinted in SwitzerlandPublication data: 4236BRO.VPR-en1011HQR
Austria Habasit GmbH, Wien Phone: +43 1 690 66www.habasit.at
BelgiumHabasit Belgium N.V., ZaventemPhone: +32 2 725 04 30www.habasit.be
CanadaHabasit Canada Ltd., OakvillePhone: +1 905 827 4131www.habasit.ca
ChinaHabasit East Asia Ltd., Hong KongPhone: +852 2145 01 50 www.habasit.com.hk
Habasit (Shanghai) Co., Ltd.ShanghaiPhone: +8621 5488 1228Phone: +8621 5488 1218www.habasit.com.hk
FranceHabasit France S.A.S., MulhousePhone: +33 389 33 89 03 www.habasit.fr
Germany Habasit GmbHEppertshausenPhone: +49 6071 969 0 www.habasit.de
IndiaHabasit-Iakoka Pvt. Ltd., CoimbatorePhone: +91 422 262 78 79www.habasitiakoka.com
ItalyHabasit Italiana SpACustomer Care:Phone: 199 199 333For int. calls: +39 0438 911444 www.habasit.it
JapanHabasit Nippon Co. Ltd., YokohamaPhone: +81 45 476 03 71 www.habasit.co.jp
NetherlandsHabasit Netherlands BV, NijkerkPhone: +31 33 24 72 030 www.habasit.nl
New Zealand Habasit Australasia Ltd., Hornby Phone: +64 3348 5600 www.habasit.co.nz
NorwayHabasit Norge A/S, OsloPhone: +47 81 55 84 58www.habasit.no
PolandHabasit Polska Sp. zo.o., Dàbrowa Górnicza,Phone: +48 32 639 02 40www.habasit.pl
RussiaOOO Habasit Ltd., St. PetersburgPhone: +7 812 325 40 82www.habasit.ru
SingaporeHabasit Far East Pte. Ltd.,SingaporePhone: +65 6862 55 66 www.habasit.com.sg
SpainHabasit Hispanica S.A., Barberà del VallèsPhone: +34 93 719 19 12 www.habasit.es
SwedenHabasit AB, HindasPhone: +46 301 226 00www.habasit.se
SwitzerlandHabasit GmbH, ReinachPhone: +41 61 577 51 00www.habasit.ch
TaiwanHabasit Rossi (Taiwan) Ltd.Taipei HsienPhone: +886 2 2267 0538www.habasit.com.tw
TurkeyHabasit Kayis San. Ve Tic. Ltd. Sti.Yenibosna - Bahcelievler - IstanbulPhone: +90-212-654 94 04www.habasit.com.tr
UkraineHabasit Ukraina, VinnicaPhone: +38 0432 58 47 35www.habasit.ua
United Kingdom and IrelandHabasit Rossi (UK) Ltd., Silsden Phone: +44 870 835 9555 www.habasitrossi.co.uk
USAHabasit America Conveyor belts, power transmission belts, gearmotors Suwanee, Georgia Phone: +1 800-458-6431 www.habasitamerica.com
Habasit America Seamless belts, timing belts Middletown, Connecticut Phone: +1 860 632 2211 www.seamlessbelts.comwww.habasync.com
Rossi is one of Europe’s largest manufacturers of gear reducers, gearmotors, inverters, standard and brakemotors, and is a member of the Habasit Group.
Rossi S.p.A. Via Emilia Ovest 915/A41123 Modena – ItalyPhone: +39 059 33 02 [email protected]