EXPRESS S5ENGRAVER

• 6” x 8” engraving area & aluminum t-slot table• Ethernet Interface• V-Touch Multi-Functional Touch Screen• Linear rails and Teflon coated leadscrews for minimal maintenance. maintenance.• Electronic sensor for automatic surface setting• Red laser pointer for dry runs

• 8” x 10” engraving area & aluminum T-slot table with 1” spindle clearance• V-Touch Multi-Functional Touch Screen• Steel frame construction• Linear rails and Teflon-coated lead screws for minimal maintenance screws for minimal maintenance• Electronic sensor for automatic surface setting• Easy-to-use, full-featured front panel• Ethernet interface• Red laser pointer for easy set-up• Optional deep vise available• Optional deep vise available

VE 810 S5ENGRAVER

Phoenix 1212 S5ENGRAVER

• 12” x 12” engraving area & aluminum T-slot table• Engraves items up to 3 ¼” thick with optional “Deep Vise”• Uses 11/64” or 1/4” top-loading spindle (collet optional)• Electronic sensor for automatic• Electronic sensor for automatic surface setting• Includes Quick-Lock Vise• V-Touch Multi-Functional Touch Screen• Red laser pointer for easy set-up

• 8” x 12” aluminum T-slot table• Engrave items up to 11” in diameter and flat items up to 8”x12” (and up to 11” thick)• Self-centering work-holding vise with cones for round items and pins for various jigs pins for various jigs• Series 5 Multi-Functional V-Touch Pendant• Optional ring engraver attachment

MAX S5ENGRAVER

• 8” x 12” aluminum T-slot table• Engrave items up to 6” in diameter and flat items up to 8”x12” (and up to 6” thick)• 16,000-RPM spindle (collet optional) w/ 3” of travel• Engraving speeds up to 10” per• Engraving speeds up to 10” per second• Motorized cylindrical engraver & work-holding vise• Integrated cooling system for glass engraving• Fully-featured hand held pendant w/ LCD w/ LCD• Red laser pointer for easy set-ups• Optional ring engraver attachment• Series 5 Multi-Functional V-Touch Pendant

MAX Pro S5ENGRAVER

• 16” x 12” or 16” x 24” aluminum T-slot table with ruled edge guides• Optional Automatic Raster™ Braille Inserter for automatic Braille bead insertion• Engraves items up to 1.875” thick• Engraves items up to 1.875” thick (3.5” thick or more w/ custom risers)• Series 5 Multi-Functional V-Touch Pendant• Includes Quick-Lock Vise• Red laser pointer for easy setup

16 Series S5ENGRAVERS

• 24” x 24” or 24” x 48” aluminum flatbed table with material guides• Optional T-slot table• Engraves items up to 1.875” thick(3.5” thick or more w/ custom risers)• Optional• Optional Automatic Raster™ Braille Inserter for automatic Braille bead insertion• Series 5 Multi-Functional V-Touch Pendant• Proximity Sensor (for automatic surface settings)• Red laser pointer for easy set-ups• Red laser pointer for easy set-ups

24 Series S5ENGRAVERS

•16” x 24” aluminum T-slot table with ruled edge guides• Optional Automatic Raster™ Braille Inserter for automatic Braille bead insertion• 3.25 HP Router Motor or Engraving Head Engraving Head• Series 5 Multi-Functional V-Touch Pendant• Includes Quick-Lock Vise• Red laser pointer for easy setup• Optional Oscillating Knife

1624R S5CNC ROUTER

• 25” x 25” or 25” X 50” aluminum T-slot table• Routs material 25” x any length (In multiple sections)• Optional Automatic Raster™ Braille Inserter for automatic Braille bead insertion Braille bead insertion• High-quality tubular steel base and stand• Heavy duty extruded gantry• Series 5 Multi-Functional V-Touch Pendant• High performance stepper motors in X, in X, Y and Z axis• Highly accurate due to the precision lead screw design• Optional Oscillating Knife

25 Series S5CNC ROUTERS

• 25” X 50” vacuum table• Series 5 Multi-Functional V-Touch Pendant• Hold material without use of clamps or tape• Routs material 25” x any length (In multiple sections) (In multiple sections)• Optional Automatic Raster™ Braille Inserter for automatic Braille bead insertion• High-quality tubular steel base and stand• Heavy duty extruded gantry• High performance stepper motors• High performance stepper motors in X, Y and Z axis• Highly accurate due to the precision lead screw design• Optional Oscillating Knife

25 Series S5 VacuumCNC ROUTER

• 4’ x 8’ routing area• Series 5 Multi-Functional V-Touch Pendant• Ethernet interface• Vacuum chip/dust removal system included•• Aluminum T-slot or vacuum table available• Optional DACS (Digitally Aligned Cutting System) camera, an alignment tool providing perfect print-to-cut registration for graphics• Optional Oscillating Knife

VR48 S5CNC ROUTER