Rotecna - Catalogue

Specie evolution

EDIT

ION:

OCT

OBE

R O

F 20

12 -

Rev

_01

(20-

01-2

013)

- D

EPÓ

SITO

LEG

AL:

THE EVOLUTION OF THE SPECIES

In our obsession with the research and development of technological improvements that, on one hand, make our products more competitive around the world and, on the other, increase the productivity of our pig farms, we must not forget the most important: at Rotecna, we believe that technological progress is not an end in itself, but rather a means to improve people’s lives. Over the years of our experience, situations have changed constantly and our efforts always to look forward despite the difficulties have led us to see change as an inexhaustible source of opportunities.

In the animal kingdom, the ability to adapt is one of the factors that allow a species to survive. Our business world is not different. We are essentially governed by the same laws. Ongoing improvement, the result of a critical attitude, moves us forward from day to day.

In Rotecna, we have a dream and we imagine the evolution of our products, our species, to offer you the best we have.

Gener RomeuPresident of Rotecna, s.a.

EDIT

ION:

OCT

OBE

R O

F 20

12 -

Rev

_01

(20-

01-2

013)

- D

EPÓ

SITO

LEG

AL:

THE EVOLUTION OF THE SPECIES

In our obsession with the research and development of technological improvements that, on one hand, make our products more competitive around the world and, on the other, increase the productivity of our pig farms, we must not forget the most important: at Rotecna, we believe that technological progress is not an end in itself, but rather a means to improve people’s lives. Over the years of our experience, situations have changed constantly and our efforts always to look forward despite the difficulties have led us to see change as an inexhaustible source of opportunities.

In the animal kingdom, the ability to adapt is one of the factors that allow a species to survive. Our business world is not different. We are essentially governed by the same laws. Ongoing improvement, the result of a critical attitude, moves us forward from day to day.

In Rotecna, we have a dream and we imagine the evolution of our products, our species, to offer you the best we have.

Gener RomeuPresident of Rotecna, s.a.

ROTECNA’S VALUE LIES IN ITS TEAM

It is clear that our products are the most visible aspect of our organisation. Our sales team has also built an intense and fruitful engagement between our clients and the company.

However, it is also obvious that under the tip of the iceberg that our sales department represents, there is an important human machinery, responsible for each and every one of the activities that make our company’s final target viable: to supply our clients with the best product-service binomial on the market.

Each member of each of the departments that make up our team accepts the challenge of work well done, with individual responsibility and rigour, which, on a collective level, guarantees the strength and excellence that have always distinguished our organisation.

Thus, at this moment when we are proud to be able to present the fruits of our work to our clients, we take this opportunity to send our heartfelt recognition to each and every one of the components of this great family who have made it possible.

Amable IzquierdoGeneral Manager of Rotecna, s.a.

As a representation, in this image there are all those who were there, but not all those who there are.

ROTECNA’S VALUE LIES IN ITS TEAM

It is clear that our products are the most visible aspect of our organisation. Our sales team has also built an intense and fruitful engagement between our clients and the company.

However, it is also obvious that under the tip of the iceberg that our sales department represents, there is an important human machinery, responsible for each and every one of the activities that make our company’s final target viable: to supply our clients with the best product-service binomial on the market.

Each member of each of the departments that make up our team accepts the challenge of work well done, with individual responsibility and rigour, which, on a collective level, guarantees the strength and excellence that have always distinguished our organisation.

Thus, at this moment when we are proud to be able to present the fruits of our work to our clients, we take this opportunity to send our heartfelt recognition to each and every one of the components of this great family who have made it possible.

Amable IzquierdoGeneral Manager of Rotecna, s.a.

As a representation, in this image there are all those who were there, but not all those who there are.

GROWFEEDER

MAXI

page 14

SOW BOWL

page 16

FEEDINGBALL

page 17

CONVEYOR SYSTEM AUGER SET

page 50

CHAIN & DISK SYSTEM SET

page 51

CLUTCH DISPENSER

page 24

DOSIMATIC

page 24

SIMPLEX

page 25

VRH-3

page 27

EASY DRINKERDUO

page 28

FOUR

page 25

feeders

drinking bowls & vrh-3 valve

comveyor systems

dispensers

SWING DRINKERMAXI

page 28

GROWFEEDER

MAXI

page 14

SOW BOWL

page 16

FEEDINGBALL

page 17


page 50


page 51

CLUTCH DISPENSER

page 24

DOSIMATIC

page 24

SIMPLEX

page 25

VRH-3

page 27

EASY DRINKERDUO

page 28

FOUR

page 25

feeders


comveyor systems

dispensers

SWING DRINKERMAXI

page 28

ANTI-SLIP SLATS

page 44

TRAP SLAT

page 33

FERROCAST® SLATS

page 44

ERGOFIX

page 45

DELTABEAM

page 46

T PROFILE

page 47

MINIHOPPER PAN

page 21

EASY PAN

page 20

TECNA PAN

page 20

BASICPOST

BEAM

page 47

EASYDRINKER

Mini

page 26

NI-2 CORNER

page 30

NI-2 CENTRAL

page 31

WEANER SLATS

page 37-38

BLIND & PARTIAL

BLIND SLATS

page 40-41

SOW SLATS

page 34-35

HEATED PLATES

page 42-43

FAST LOCK BRACKETS

page 49

SS U BRAQUETS

page 49

WEAN TOFINISH SLATS

page 32

SOW BOWL

page 16

FEEDINGBALL

page 17

CLUTCH DISPENSER

page 24

DOSIMATIC

page 24

SOWFEEDER

page 16

SIMPLEX

page 25

VRH-3

page 27

EASY DRINKERDUO

page 28

FOUR

page 25

MINITAINER

page 21

feeders

pans


slats

ni-2

floor

comveyor systems

pvc

dispensers


page 50


page 51

ANTI-SLIP SLATS

page 44

TRAP SLAT

page 33

FERROCAST® SLATS

page 44

ERGOFIX

page 45

DELTABEAM

page 46

T PROFILE

page 47

MINIHOPPER PAN

page 21

EASY PAN

page 20

TECNA PAN

page 20

BASICPOST

BEAM

page 47

EASYDRINKER

Mini

page 26

NI-2 CORNER

page 30

NI-2 CENTRAL

page 31

WEANER SLATS

page 37-38

BLIND & PARTIAL

BLIND SLATS

page 40-41

SOW SLATS

page 34-35

HEATED PLATES

page 42-43

FAST LOCK BRACKETS

page 49

SS U BRAQUETS

page 49

WEAN TOFINISH SLATS

page 32

SOW BOWL

page 16

FEEDINGBALL

page 17

CLUTCH DISPENSER

page 24

DOSIMATIC

page 24

SOWFEEDER

page 16

SIMPLEX

page 25

VRH-3

page 27

EASY DRINKERDUO

page 28

FOUR

page 25

MINITAINER

page 21

feeders

pans


slats

ni-2

floor

comveyor systems

pvc

dispensers


page 50


page 51

MAXITAINER

page 23

MAXI HOPPER PAN

page 22

EASYDRINKER

MIDI

page 26

DRINKER TILTING

page 26

SWING DRINKER

page 29

1200x500 WEANER SLATS

page 37

SWING R-3

page 19

TR-5

page 17

GROWFEEDER

DESTETE

page 16feeders

pans


ERGOFIX

page 45

DELTABEAM

page 46

T PROFILE

page 47

BASICPOST

BEAM

page 47

WEANER SLATS

page 37-38

BLIND & PARTIAL

BLIND SLAT

page 40-41

PARTIAL BLIND SLATS

page 40-41

600 WEANER SLATS

page 40-41

HEATED PLATES

page 42-43

slats

floor

comveyor systems

pvc

FAST LOCK BRACKETS

page 49

SS U BRAQUETS

page 49


page 50


page 51

MAXITAINER

page 23

MAXI HOPPER PAN

page 22

EASYDRINKER

MIDI

page 26

DRINKER TILTING

page 26

SWING DRINKER

page 29

1200x500 WEANER SLATS

page 37

SWING R-3

page 19

TR-5

page 17

GROWFEEDER

DESTETE

page 16feeders

pans


ERGOFIX

page 45

DELTABEAM

page 46

T PROFILE

page 47

BASICPOST

BEAM

page 47

WEANER SLATS

page 37-38

BLIND & PARTIAL

BLIND SLAT

page 40-41

PARTIAL BLIND SLATS

page 40-41

600 WEANER SLATS

page 40-41

HEATED PLATES

page 42-43

slats

floor

comveyor systems

pvc

FAST LOCK BRACKETS

page 49

SS U BRAQUETS

page 49


page 50


page 51

(WEAN TO FINISH)

CLICK-IN

page 45

feeders

pans


ERGOFIX

page 45

BASICPOST

BEAM

page 47

WEAN TOFINISH SLATS

page 32

SOW BOWL

page 16

FEEDINGBALL

page 17

EASY DRINKERDUO

page 28

SWING DRINKERMAXI

page 28

slats

floor

comveyor systems

SWING R-3

page 19

GROWFEEDER

MAXI

page 14

TR-2

page 15

MAXI HOPPER PAN

page 22

SWING DRINKER

page 29


page 50


page 51

SWING R-3

page 19

(FOR WEAN TO FINISH) TR-5

page 17

(WEAN TO FINISH)

CLICK-IN

page 45

feeders

pans


ERGOFIX

page 45

BASICPOST

BEAM

page 47

WEAN TOFINISH SLATS

page 32

SOW BOWL

page 16

FEEDINGBALL

page 17

EASY DRINKERDUO

page 28

SWING DRINKERMAXI

page 28

slats

floor

comveyor systems

SWING R-3

page 19

GROWFEEDER

MAXI

page 14

TR-2

page 15

MAXI HOPPER PAN

page 22

SWING DRINKER

page 29


page 50


page 51

SWING R-3

page 19

(FOR WEAN TO FINISH) TR-5

page 17

14 15

Just the evolution of the genuine finishing feeder could be better than the original.

• More volume. 60L.

• 13 settings for regulation. With more setting points the adjustment of the feed flow is more precise, reducing feed waste.

• Water pipe position on the left or on the right. The hopper’s structure allows the installation of the ½” PVC water pipe on any of both sides of the feeder. The pipe is inserted in the hopper, out of reach of animals and avoiding condensation drops inside the hopper.

• Longer actuation mechanism. The smallest piglets can reach it and move it more easily, improving adaptation and feed conversion rate.

• Water nipple pointed to the piglets for a faster adaptation.

• The feeder is a single injected piece, unique in the market in this size. This makes the feeder extremely robust, without connections or sharp edges allowing a very easy cleaning.

• Easy opening system of the actuation mechanism: with a simple swing movement allowing an easy cleaning.

• Made of high density polypropylene and stainless steel for a very long durability.

• Thick bowl base, indestructible.

18100000 GROW FEEDER MAXI MASH & PELLETS

18101000 GROW FEEDER MAXI MASH & PELLETS WITHOUT WATER KIT

18200000 TR2 FINISHER FEEDER

18202001 TR2-SR FINISHER FEEDER

• The V-shaped design of the feeding outlets allowing two big pigs to eat at the same time.

• The exclusive design of the slide gate (SANDWICH system)allows the feeder to be adjusted even when it is full of feed.

• Totally made of plastic (high-density polypropylene) and stainless steel, that makes the feeder very resistant to wearing out from use by the animals and corrosive and oxidising agents (feed and water) for a long time.

• Its special design avoids feed accumulating and caking inside (especially mash), as well as makes the feed flow better inside.

• To optimise the transport space, the TR-2 is stacked and palletised.

• The absence of porosity in the material, corners and having feet on the base of the feeder makes it easier for the farmer to clean and disinfect it.

The new TR-2 feeder with 2 outlets, it corresponds to a new range of dry feeders for finishing.

With this new product, we offer to the farmers the best options in this productive phase when dry feeding.

TR2-SR

TR2

GROW FEEDER MAXI

• 27 feeders / pallet.• Packaging sizes: 100x120x256 cm.

TECHNICAL DATA TR2 TR2-SR

Feeder capacity, l 130

Animal weight, kg 18-120

Suitable for finishing

Feed Dry

Nº animals/feeder 20-22

Feeder outlets 2

Height, cm 110

Width, cm 60

Depth, cm 40

Plate access, cm 16

Outlets width, cm 55 19 Ø

Weight, kg 12,5 10,6

Dosage setting system YES NO

TECHNICAL DATA




Feed Wet / Dry


Feeder outlets 1

Height, cm 107

Width, cm 37

Depth, cm 34

Plate access, cm 14

Weight, kg 8

Dosage setting system YES

TR2

14 15

Just the evolution of the genuine finishing feeder could be better than the original.

• More volume. 60L.

• 13 settings for regulation. With more setting points the adjustment of the feed flow is more precise, reducing feed waste.

• Water pipe position on the left or on the right. The hopper’s structure allows the installation of the ½” PVC water pipe on any of both sides of the feeder. The pipe is inserted in the hopper, out of reach of animals and avoiding condensation drops inside the hopper.

• Longer actuation mechanism. The smallest piglets can reach it and move it more easily, improving adaptation and feed conversion rate.

• Water nipple pointed to the piglets for a faster adaptation.

• The feeder is a single injected piece, unique in the market in this size. This makes the feeder extremely robust, without connections or sharp edges allowing a very easy cleaning.

• Easy opening system of the actuation mechanism: with a simple swing movement allowing an easy cleaning.

• Made of high density polypropylene and stainless steel for a very long durability.

• Thick bowl base, indestructible.

18100000 GROW FEEDER MAXI MASH & PELLETS

18101000 GROW FEEDER MAXI MASH & PELLETS WITHOUT WATER KIT

18200000 TR2 FINISHER FEEDER

18202001 TR2-SR FINISHER FEEDER

• The V-shaped design of the feeding outlets allowing two big pigs to eat at the same time.

• The exclusive design of the slide gate (SANDWICH system)allows the feeder to be adjusted even when it is full of feed.

• Totally made of plastic (high-density polypropylene) and stainless steel, that makes the feeder very resistant to wearing out from use by the animals and corrosive and oxidising agents (feed and water) for a long time.

• Its special design avoids feed accumulating and caking inside (especially mash), as well as makes the feed flow better inside.

• To optimise the transport space, the TR-2 is stacked and palletised.

• The absence of porosity in the material, corners and having feet on the base of the feeder makes it easier for the farmer to clean and disinfect it.

The new TR-2 feeder with 2 outlets, it corresponds to a new range of dry feeders for finishing.

With this new product, we offer to the farmers the best options in this productive phase when dry feeding.

TR2-SR

TR2

GROW FEEDER MAXI

• 27 feeders / pallet.• Packaging sizes: 100x120x256 cm.

TECHNICAL DATA TR2 TR2-SR




Feed Dry


Feeder outlets 2

Height, cm 110

Width, cm 60

Depth, cm 40

Plate access, cm 16

Outlets width, cm 55 19 Ø

Weight, kg 12,5 10,6

Dosage setting system YES NO

TECHNICAL DATA




Feed Wet / Dry


Feeder outlets 1

Height, cm 107

Width, cm 37

Depth, cm 34

Plate access, cm 14

Weight, kg 8

Dosage setting system YES

TR2

16 17

• The animals learn very fast how to use the mechanism thanks to its root movement.

• The system avoids feed waste, keeping feed fresh.

• Double feeding system: Restricted and ad libitum, which increases feed intake significantly in Farrowing. It does not require regulation to get available for every single sow as much feed as it requires, according to its individual needs.

• The mechanism can be removed easily, allowing an optimal cleaning and functioning.

13005000 FEEDING BALL (PLASTIC support)

13006000 FEEDING BALL (SS support)

13005011 FEEDING BALL KIT TO DISPENSER

13005010 HOPPER FOR FEEDING BALL

The DOSER KIT for FEEDING BALL has a capacity of 8.5 L. feed. It has a height of 55 cm and a diameter of 12.5 cm.

The HOPPER for FEEDING BALL has a capacity of 15 L. feed.SOW0C10 SOW BOWL WITH 1 PROTECTION STRIP

SOW0C11 SOW BOWL WITH 2 PROTECTIONS STRIP

During the farrowing the eating speed and daily intake vary.

This affects milk production and productivity of the sow for the next delivery.

GRO0A12 GROW FEEDER MIDI

GRO0A13 GROW FEEDER MIDI WITHOUT WATER KIT

GRO0A42 SOW FEEDER MASH & PELLETS

GRO0A43 SOW FEEDER MASH & PELLETS WITHOUT WATHER KIT

Advantages of the new support:

• Installation versatility.

• Economic.

• Handling more accessible to the farmer.

• Its design prevents accumulation of feed thereby maintaining maximum hygiene.

• Made of a high density polyethylene and stainless steel that makes it very durable if kept in optimal conditions.

• Ideal to combine with VRH-3 Valve and Feeding Ball.

GROW FEEDER MINI SOW FEEDER

SOW BOWL

FEEDING BALL

Feeding Ball Complements

Low flow feeder: It is designed for Farrowing and it can also be used in Gestation.

Ad libitum feeding.

It increases the feed intake in Farrowing significantly, so that the milk production rises.

Option of 2 brackets: Plastic and stainless steel.

HOPPER FOR FEEDING BALL

DOSER KIT FOR FEEDING BALL

Animals feed with a Grow Feeder MINI during the post-weaning period will adapt faster in the fattening phase.

• Feed intake is stimulated due to wet & dry feeding.

• Improved results if Maxi Hopper pan is added.

• Very good feed conversion.

• Prevents stress due to ad libitum feeding.

• Sow is able to dose feed, avoiding feed over-lefts in the bowl that can acidify.

• Wet & dry feeding stimulates feed intake.TECHNICAL DATA



Hopper capacity, l 30

Height, cm 90

Diameter, cm 26

TECHNICAL DATA

Nº animals/bowl 1

Bowl capacity, l -

Maximum Height, cm 39

Minimum Height, cm 16

Depth, cm 46

Width, cm 33

TECHNICAL DATA

Nº animals/feeder 1

Animal weight, kg -


Height, cm 82

Diameter, cm 31

16 17

• The animals learn very fast how to use the mechanism thanks to its root movement.

• The system avoids feed waste, keeping feed fresh.

• Double feeding system: Restricted and ad libitum, which increases feed intake significantly in Farrowing. It does not require regulation to get available for every single sow as much feed as it requires, according to its individual needs.

• The mechanism can be removed easily, allowing an optimal cleaning and functioning.

13005000 FEEDING BALL (PLASTIC support)

13006000 FEEDING BALL (SS support)

13005011 FEEDING BALL KIT TO DISPENSER

13005010 HOPPER FOR FEEDING BALL

The DOSER KIT for FEEDING BALL has a capacity of 8.5 L. feed. It has a height of 55 cm and a diameter of 12.5 cm.

The HOPPER for FEEDING BALL has a capacity of 15 L. feed.SOW0C10 SOW BOWL WITH 1 PROTECTION STRIP

SOW0C11 SOW BOWL WITH 2 PROTECTIONS STRIP

During the farrowing the eating speed and daily intake vary.

This affects milk production and productivity of the sow for the next delivery.

GRO0A12 GROW FEEDER MIDI

GRO0A13 GROW FEEDER MIDI WITHOUT WATER KIT

GRO0A42 SOW FEEDER MASH & PELLETS

GRO0A43 SOW FEEDER MASH & PELLETS WITHOUT WATHER KIT

Advantages of the new support:

• Installation versatility.

• Economic.

• Handling more accessible to the farmer.

• Its design prevents accumulation of feed thereby maintaining maximum hygiene.

• Made of a high density polyethylene and stainless steel that makes it very durable if kept in optimal conditions.

• Ideal to combine with VRH-3 Valve and Feeding Ball.

GROW FEEDER MINI SOW FEEDER

SOW BOWL

FEEDING BALL

Feeding Ball Complements

Low flow feeder: It is designed for Farrowing and it can also be used in Gestation.

Ad libitum feeding.

It increases the feed intake in Farrowing significantly, so that the milk production rises.

Option of 2 brackets: Plastic and stainless steel.

HOPPER FOR FEEDING BALL

DOSER KIT FOR FEEDING BALL

Animals feed with a Grow Feeder MINI during the post-weaning period will adapt faster in the fattening phase.

• Feed intake is stimulated due to wet & dry feeding.

• Improved results if Maxi Hopper pan is added.

• Very good feed conversion.

• Prevents stress due to ad libitum feeding.

• Sow is able to dose feed, avoiding feed over-lefts in the bowl that can acidify.

• Wet & dry feeding stimulates feed intake.TECHNICAL DATA




Height, cm 90

Diameter, cm 26

TECHNICAL DATA

Nº animals/bowl 1

Bowl capacity, l -

Maximum Height, cm 39

Minimum Height, cm 16

Depth, cm 46

Width, cm 33

TECHNICAL DATA

Nº animals/feeder 1

Animal weight, kg -


Height, cm 82

Diameter, cm 31

18 19

• 3 options for higher efficiency in weaning, fattening and wean to finish.

• Monoblock construction makes it very robust and easy to assemble.

• Asymmetric hopper walls and wider hopper outlet makes feed meal flow easier.

• 24 settings of regulation make it more sensible and efficient.

• Easy access and ergonomic hand filling inlet.

• Thanks to the interlocking design of the components the hopper is humidity proved and flavour saving.

• Reliable complete stainless steel water piping.

• Raised pan with complete footing and stabilizer kit included.

• No sharp edges nor gaps, no feed rests and easy to clean.

The new generation of the TR dry feeders for weaners (TR5 and TR4), grows and improves its advantages, to remain the best option for the more demanding farmers.

• Empty out the left-over feed.• Attach in a vertical position for cleaning.• Turn and attach up side down for drying.

TECHNICAL DATA TR5 TR4

Feeder capacity, L. 120 120

Animal weight, kg 6-30 6-40

Suitable for weaner weaner

Feed dry dry

Nº animals/feeder 25 25

Feeder outlets 5 4

Height, cm 70 70

Width, cm 80 80

Depth, cm 30 30

Outlets width, cm 15 18,7

01100005 TR5 WEANER FEEDER


TECHNICAL DATA DUO WET TUBE

Feeder capacity, L. 95


Suitable for weaner, finisher & wean to finish

Feed wet - dry wet dry


Hopper filling height, cm 125 (mouth inclined)

Diameter of hopper, cm 57 (maximum)

Diameter of hopper, cm 14 (minimum)

Bowl measures, cm 55x45x10+3

Drop system of feed pendulum tube (SS) pendulum

Number of nipples 2

16000000 SWING R3 DUO

16010000 SWING R3 WET

17300000 SWING R3 TUBE (POLIMER)

Higher efficiency in weaning, fattening and wean to finish.

• The TR support facilitates complete feed emptying and thorough cleaning, eliminating dirtiness.

• Full stainless steel construction.

• The bracket in the base of the Swing R3 feeder is specially designed to fix properly the feeder in any kind of floor.

Existing advantages:

• Easy Regulation. The exclusive system of the slide gate (“sandwich”) allows a perfect regulation of the full feeder.

• Longer Durability. Totally made of plastic (high-density polypropylene) and stainless steel.

• The hopper TR5 has 5 feeding space and TR4 has 4.

TR4

Tube

Tube

Duo

Duo

Wet

Wet

TR5

TR5 - TR4 SWING R3

New advantages:

• More height, more volume. This prevents the access of piglets inside the feeder.

• Raised feet, more hygiene.

• Also taking into account the absence of sharp corners inside the feeder and injected in one piece, the tasks of cleaning and hygiene have become easier as well as keeping the sanitary conditions.

• Better robustness.

TR50B17 TR SS BRACKET

16000049 SWING R3 BASE ANCHOR

The TR support is the best bracket for TR feeders.

SWING R3 Base Anchor

TR SS Bracket

18 19

• 3 options for higher efficiency in weaning, fattening and wean to finish.

• Monoblock construction makes it very robust and easy to assemble.

• Asymmetric hopper walls and wider hopper outlet makes feed meal flow easier.

• 24 settings of regulation make it more sensible and efficient.

• Easy access and ergonomic hand filling inlet.

• Thanks to the interlocking design of the components the hopper is humidity proved and flavour saving.

• Reliable complete stainless steel water piping.

• Raised pan with complete footing and stabilizer kit included.

• No sharp edges nor gaps, no feed rests and easy to clean.

The new generation of the TR dry feeders for weaners (TR5 and TR4), grows and improves its advantages, to remain the best option for the more demanding farmers.

• Empty out the left-over feed.• Attach in a vertical position for cleaning.• Turn and attach up side down for drying.

TECHNICAL DATA TR5 TR4

Feeder capacity, L. 120 120

Animal weight, kg 6-30 6-40

Suitable for weaner weaner

Feed dry dry

Nº animals/feeder 25 25

Feeder outlets 5 4

Height, cm 70 70

Width, cm 80 80

Depth, cm 30 30

Outlets width, cm 15 18,7



TECHNICAL DATA DUO WET TUBE



Suitable for weaner, finisher & wean to finish

Feed wet - dry wet dry


Hopper filling height, cm 125 (mouth inclined)

Diameter of hopper, cm 57 (maximum)

Diameter of hopper, cm 14 (minimum)

Bowl measures, cm 55x45x10+3

Drop system of feed pendulum tube (SS) pendulum

Number of nipples 2

16000000 SWING R3 DUO

16010000 SWING R3 WET

17300000 SWING R3 TUBE (POLIMER)

Higher efficiency in weaning, fattening and wean to finish.

• The TR support facilitates complete feed emptying and thorough cleaning, eliminating dirtiness.

• Full stainless steel construction.

• The bracket in the base of the Swing R3 feeder is specially designed to fix properly the feeder in any kind of floor.

Existing advantages:

• Easy Regulation. The exclusive system of the slide gate (“sandwich”) allows a perfect regulation of the full feeder.

• Longer Durability. Totally made of plastic (high-density polypropylene) and stainless steel.

• The hopper TR5 has 5 feeding space and TR4 has 4.

TR4

Tube

Tube

Duo

Duo

Wet

Wet

TR5

TR5 - TR4 SWING R3

New advantages:

• More height, more volume. This prevents the access of piglets inside the feeder.

• Raised feet, more hygiene.

• Also taking into account the absence of sharp corners inside the feeder and injected in one piece, the tasks of cleaning and hygiene have become easier as well as keeping the sanitary conditions.

• Better robustness.

TR50B17 TR SS BRACKET

16000049 SWING R3 BASE ANCHOR

The TR support is the best bracket for TR feeders.

SWING R3 Base Anchor

TR SS Bracket

20 21

• Its wide bowl enables, with several piglets able to eat simultaneously.

• Bowl without corners, for better cleaning and maximum hygiene.

• Its exclusive design and its dividers prevent possible feed wastage.

• Its wide bowl allows several piglets to eat simultaneously.

• Handle with arrow for connection to any slatted floor.

• Anchoring hook is suitable for all types of flooring (metal, plastic, etc.).

facilitates piglet access to pre-starter and starter feed.

MIN0C30 EASY PAN

TECHNICAL DATA EASY PAN TECNA PAN MINI PAN

Number of feeding outlets 5 5 -

Pan capacity, L. 2,6 2 2,6

Height, cm 32 25 32

Diameter, cm 27 24 27

TEC0C10 TECNA PAN

TEC0C11 TECNA PAN FOR CONCRETE SLAT

MIN0C10 MINI PAN

• Hermetically sealed lid.

• Lid without edges avoids opening by piglets.

• Curved rim and wings to prevent feed wastage.

• Easy adjustment of the feed dosage.

• Handle with arrow for rapid connection to any slatted floor.

It is crucial that the piglets start eating creep feeds as early as possible, as this will improve their adaptation in the post-weaning period where their feed source changes drastically.

MIN0C20 MINI HOPPER PAN

TECHNICAL DATA

Number of feeding outlets 5

Pan capacity, L. 2,6


Height, cm 32

Diameter, cm 27

1530000P MINITAINER

It is a semi-transparent container linked to a Mini Pan, designed to dispense liquids to suckling piglets. For supplying milk or medication.

TECHNICAL DATA



Height, cm 32

Diameter, cm 27

• More economic medication for the pen.

• Wide mouth for easy, fast filling/emptying of the container.

• Easy adaptation for the piglets.

• Visible contents.

• Coupling to immobilise the contents.


• Without wastage: rounded edges.

Easy adjustment

EASY PAN TECNA PAN

MINI PAN

MINI HOPPER PAN

MINITAINER

closed

open

20 21

• Its wide bowl enables, with several piglets able to eat simultaneously.

• Bowl without corners, for better cleaning and maximum hygiene.

• Its exclusive design and its dividers prevent possible feed wastage.

• Its wide bowl allows several piglets to eat simultaneously.

• Handle with arrow for connection to any slatted floor.

• Anchoring hook is suitable for all types of flooring (metal, plastic, etc.).

facilitates piglet access to pre-starter and starter feed.

MIN0C30 EASY PAN

TECHNICAL DATA EASY PAN TECNA PAN MINI PAN

Number of feeding outlets 5 5 -

Pan capacity, L. 2,6 2 2,6

Height, cm 32 25 32

Diameter, cm 27 24 27

TEC0C10 TECNA PAN

TEC0C11 TECNA PAN FOR CONCRETE SLAT

MIN0C10 MINI PAN

• Hermetically sealed lid.

• Lid without edges avoids opening by piglets.

• Curved rim and wings to prevent feed wastage.

• Easy adjustment of the feed dosage.


It is crucial that the piglets start eating creep feeds as early as possible, as this will improve their adaptation in the post-weaning period where their feed source changes drastically.

MIN0C20 MINI HOPPER PAN

TECHNICAL DATA


Pan capacity, L. 2,6


Height, cm 32

Diameter, cm 27

1530000P MINITAINER

It is a semi-transparent container linked to a Mini Pan, designed to dispense liquids to suckling piglets. For supplying milk or medication.

TECHNICAL DATA



Height, cm 32

Diameter, cm 27

• More economic medication for the pen.

• Wide mouth for easy, fast filling/emptying of the container.

• Easy adaptation for the piglets.

• Visible contents.

• Coupling to immobilise the contents.


• Without wastage: rounded edges.

Easy adjustment

EASY PAN TECNA PAN

MINI PAN

MINI HOPPER PAN

MINITAINER

closed

open

22 23

• Pan grill without rivets without sharp edges, very hygienic and easy to clean.

• Lower transport volume thanks to an easy “in farm” assembling.

• More precise adjustment thanks to the progressive regulation.

• Translucent hopper allows checking feed amount inside.

TECHNICAL DATA MAXI PAN MAXIHOPPER PAN + EXTENSION

Pan capacity, L. 9 30 60


Suitable for weaner weanerSupport feeder for wean to finish

Feed dry wet - dry*(*) with maxiwet: MAXIHOPPERPAN + VR-H



Diameter of pan, cm 42,5

Diameter of hopper, cm - máx. 38 / mín. 16 38

Pan bowl height, cm 8

Altura tolva, cm - 42 68

Pan grill Stainless Steel (without sharp edges)

Regulation - pregressive

MAX0C23 MAXI HOPPER PAN LID

MAX0C24 MAXI HOPPER PAN EXTENSION

Maxitainer is a container for liquids used with Maxi Pan feeder. Is especially designed to easy drinking adaptation and dispense medication of weaned piglets.

• Supplies milk during weaning.

• Enables economical medication for an entire pen.

• Easy adaptation for suckling pigs.

• Transparent container.

• Level indicator.

• Easy-to-carry handles.

• No spills: rounded edges.

18000100 MAXI PAN

18002100 MAXI PAN FOR CONCRETE SLATS

1340000001 MAXITAINER

TECHNICAL DATA



Capacity MAXITAINER, l 24

Height, cm 73

Diameter, cm 31,5

• EXTENSION to increase the capacity up to 51 L.

• Easy to dismantle for cleaning, no need to take out the screws.

• LID avoids losses of feed aroma and prevents the entry of humidity and dirt.

• The lid is prepared for inclined or vertical drop tubes from automatic feeding systems.

The superior design and good performance results have turned it into one of ROTECNA’s leading products. And now improved.

Ideal complementory pan for Wean to Finish facilities.

• •Assemblingthehoppersetand the regulation in maxi pan we make a Maxi Hopper Pan.

MAXI PAN MAXITAINER

Set for Maxi Hopper Pan

Maxi Hopper Pan Complements

18000010 SET FOR MAXI HOPPER PAN

MAXI HOPPER PAN

22 23

• Pan grill without rivets without sharp edges, very hygienic and easy to clean.

• Lower transport volume thanks to an easy “in farm” assembling.

• More precise adjustment thanks to the progressive regulation.

• Translucent hopper allows checking feed amount inside.

TECHNICAL DATA MAXI PAN MAXIHOPPER PAN + EXTENSION

Pan capacity, L. 9 30 60


Suitable for weaner weanerSupport feeder for wean to finish

Feed dry wet - dry*(*) with maxiwet: MAXIHOPPERPAN + VR-H



Diameter of pan, cm 42,5

Diameter of hopper, cm - máx. 38 / mín. 16 38

Pan bowl height, cm 8

Altura tolva, cm - 42 68

Pan grill Stainless Steel (without sharp edges)

Regulation - pregressive

MAX0C23 MAXI HOPPER PAN LID

MAX0C24 MAXI HOPPER PAN EXTENSION

Maxitainer is a container for liquids used with Maxi Pan feeder. Is especially designed to easy drinking adaptation and dispense medication of weaned piglets.

• Supplies milk during weaning.

• Enables economical medication for an entire pen.

• Easy adaptation for suckling pigs.

• Transparent container.

• Level indicator.

• Easy-to-carry handles.

• No spills: rounded edges.

18000100 MAXI PAN

18002100 MAXI PAN FOR CONCRETE SLATS

1340000001 MAXITAINER

TECHNICAL DATA



Capacity MAXITAINER, l 24

Height, cm 73

Diameter, cm 31,5

• EXTENSION to increase the capacity up to 51 L.

• Easy to dismantle for cleaning, no need to take out the screws.

• LID avoids losses of feed aroma and prevents the entry of humidity and dirt.

• The lid is prepared for inclined or vertical drop tubes from automatic feeding systems.

The superior design and good performance results have turned it into one of ROTECNA’s leading products. And now improved.

Ideal complementory pan for Wean to Finish facilities.

• •Assemblingthehoppersetand the regulation in maxi pan we make a Maxi Hopper Pan.

MAXI PAN MAXITAINER

Set for Maxi Hopper Pan

Maxi Hopper Pan Complements

18000010 SET FOR MAXI HOPPER PAN

MAXI HOPPER PAN

24 25

• Exclusive discharge clutch allows individual dispensing of feed.

• Unique and rapid disassembly for thorough cleaning.

• Precise and easy to adjust.

• Completely transparent.

• Medication lid.

• Record card clip.

• Option to choose 2 types of feed.

The best ally for gestation and farrowing.

• Robust.

• Functional.

• User friendly operation.

• Medication lid.

CLU0E20 CLUTCH DISPENSER 6L

CLU0E21 CLUTCH DISPENSER 6L LINE END



ADAPTACLUT Ø45mm CLUTCH TUBE ADAPTER

MAT0E10 DOSIMATIC 6L

MAT0E11 DOSIMATIC 6L LINE END



• Pear shaped feed release with two counterweights.

• Quick adjustment system.


• Slide with three positions: open, close and medication.

• Unlocking of adjustment system.


TECHNICAL DATA CLUTCH DOSIMATIC SIMPLEX FOUR

Feeder capacity, L. 6 10 6 10 6 10 7

Height, cm 61,5 83,5 56,5 81,5 46,5 68,5 52,5

Diameter, cm 16,8 16,8 15,5 15,5 16,8 16,8 17,5

SIM0E30 SIMPLEX D-2 6L

SIM0E31 SIMPLEX D-2 6L LINE END



ADAPTASIMP Ø45mm SIMPLEX TUBE ADAPTER

15900000 FOUR 7L

159FL000 FOUR 7L WITH CAPACITATIVE SENSOR

159FL001 FOUR 7L TONGUE SWITCH

The all road dispenser.

• 7 L. capacity.

• Easy Handling.

• Functional.

• Heavy duty.

• Stainless Steel Slide.

• Opening for medication.

• Easy dismounting for cleaning.

CLUTCH DISPENSER FOUR

DOSIMATIC SIMPLEX D-2

TUBE ADAPTER LINE

TUBE ADAPTER LINE

ADAPTADO60 DISPENSER OUTLET REDUCER TO 60 mm Ø


24 25

• Exclusive discharge clutch allows individual dispensing of feed.

• Unique and rapid disassembly for thorough cleaning.

• Precise and easy to adjust.


• Medication lid.


• Option to choose 2 types of feed.

The best ally for gestation and farrowing.

• Robust.

• Functional.

• User friendly operation.

• Medication lid.





ADAPTACLUT Ø45mm CLUTCH TUBE ADAPTER





• Pear shaped feed release with two counterweights.

• Quick adjustment system.


• Slide with three positions: open, close and medication.

• Unlocking of adjustment system.


TECHNICAL DATA CLUTCH DOSIMATIC SIMPLEX FOUR

Feeder capacity, L. 6 10 6 10 6 10 7

Height, cm 61,5 83,5 56,5 81,5 46,5 68,5 52,5

Diameter, cm 16,8 16,8 15,5 15,5 16,8 16,8 17,5





ADAPTASIMP Ø45mm SIMPLEX TUBE ADAPTER

15900000 FOUR 7L

159FL000 FOUR 7L WITH CAPACITATIVE SENSOR

159FL001 FOUR 7L TONGUE SWITCH

The all road dispenser.

• 7 L. capacity.

• Easy Handling.

• Functional.

• Heavy duty.

• Stainless Steel Slide.

• Opening for medication.

• Easy dismounting for cleaning.

CLUTCH DISPENSER FOUR

DOSIMATIC SIMPLEX D-2

TUBE ADAPTER LINE

TUBE ADAPTER LINE



26 27

With the new valve it is sufficient.

The new VRH-3 water level valve makes its use easier.

• The VRH-3 gives an optimal performance, its success lays in keeping a constant level of water in a trough or a bowl, maximising water availability.

• Its works without any electrical or mechanical gadget.

• Optimized diaphragm.

• Easy opening: manual opening and closing. No tool is required.

• Water supply’s tap at the back.

• Fast down pipe connection, pipe does not require tread.

• Works with lower water pressure.

19300000 VRH-3 VALVE18700000 TILTING DRINKER WEANER

TECHNICAL DATA

Nº animals/VRH-3 1-20

Pressure

minimum maximum

0,3 bar 2 bar.

Volume

minimum maximum

1 L./min. 3,5 L./min.

Suckling Piglets.

Weaners.

Weaners.

New drinker with more capacity and a very innovative opening system for an easy cleaning and drying.

EAS0D20 EASY DRINKER MINI SUCKLING PIGLETS

EAS0D10 EASY DRINKER MIDI WEANERS

• A big bowl provides animals with clean water constantly.

• Avoids water waste, reducing medicine waste and manure volume produced.

• Specially designed for a better access of the animals to the water.

• Opening guide

• VRH-3 VALVE in gestation.

• VRH-3 valve in farrowing.

• Animals always have clean water.

• The bowl prevents water waste and as a consequence also the increase of slurry production.

• Specially designed to provide piglets with a good access to water.

VRH-3

EASY DRINKER

MINI

OFF ON

MIDI

• Unique swinging opening allows a fast discharge and therefore a better cleaning and drying of the bowl.

• Ø½” stainless steel pipe.

• Distance to floor 10-12 cm.

• Options of regulation of the water flow.

TILTING DRINKER

• MINI: Mounting distance from the floor: 5-8 cm.

• MIDI: Mounting distance from the floor: 10-12 cm.

• With adjustable water flow.

26 27

With the new valve it is sufficient.

The new VRH-3 water level valve makes its use easier.

• The VRH-3 gives an optimal performance, its success lays in keeping a constant level of water in a trough or a bowl, maximising water availability.

• Its works without any electrical or mechanical gadget.

• Optimized diaphragm.

• Easy opening: manual opening and closing. No tool is required.

• Water supply’s tap at the back.

• Fast down pipe connection, pipe does not require tread.

• Works with lower water pressure.

19300000 VRH-3 VALVE18700000 TILTING DRINKER WEANER

TECHNICAL DATA

Nº animals/VRH-3 1-20

Pressure

minimum maximum

0,3 bar 2 bar.

Volume

minimum maximum

1 L./min. 3,5 L./min.

Suckling Piglets.

Weaners.

Weaners.

New drinker with more capacity and a very innovative opening system for an easy cleaning and drying.

EAS0D20 EASY DRINKER MINI SUCKLING PIGLETS

EAS0D10 EASY DRINKER MIDI WEANERS

• A big bowl provides animals with clean water constantly.

• Avoids water waste, reducing medicine waste and manure volume produced.

• Specially designed for a better access of the animals to the water.

• Opening guide

• VRH-3 VALVE in gestation.

• VRH-3 valve in farrowing.

• Animals always have clean water.

• The bowl prevents water waste and as a consequence also the increase of slurry production.

• Specially designed to provide piglets with a good access to water.

VRH-3

EASY DRINKER

MINI

OFF ON

MIDI

• Unique swinging opening allows a fast discharge and therefore a better cleaning and drying of the bowl.

• Ø½” stainless steel pipe.

• Distance to floor 10-12 cm.

• Options of regulation of the water flow.

TILTING DRINKER

• MINI: Mounting distance from the floor: 5-8 cm.

• MIDI: Mounting distance from the floor: 10-12 cm.

• With adjustable water flow.

28 29

Trough with VRH-3 valve in farrowing for supplying sows and their litter with water.

The swing drinker for gestation.

• Can be used for finishers.

• Completely rustproof.

• Can be fitted to the wall or to the farrowing crate.

• Easy access for sows and piglets.

• The bowl is designed to avoid the waste of water by having an internal rim.

• VRH-3 valve ensures water level remains constant.

15400000 EASY DRINKER DUO

Swing drinker for weaning and fattening.

For good water consumption, the drinker combines the two most important features: a constant flow and easy access for even the smallest piglets.

• Up to 50% reduction in water wastage.

• Up to 50% less manure production.

• Saving in medication.

• Its swing action helps maintain water-quality and hygiene.

11300000 SWING DRINKER WITH VRH-3

17900000 SWING DRIKER MAXI

TECHNICAL DATA

Number of feeding outlets 2-3

Nº animals 25-40


TECHNICAL DATA


Nº animals 20

Animal weight, kg 250

EASY DRINKER DUO SWING DRINKER

SWING DRINKER MAXI

• The VRH-3 with sow bowl is a heavy duty drinker, specially designed for gestations.

28 29

Trough with VRH-3 valve in farrowing for supplying sows and their litter with water.

The swing drinker for gestation.

• Can be used for finishers.

• Completely rustproof.

• Can be fitted to the wall or to the farrowing crate.

• Easy access for sows and piglets.

• The bowl is designed to avoid the waste of water by having an internal rim.

• VRH-3 valve ensures water level remains constant.

15400000 EASY DRINKER DUO

Swing drinker for weaning and fattening.

For good water consumption, the drinker combines the two most important features: a constant flow and easy access for even the smallest piglets.

• Up to 50% reduction in water wastage.

• Up to 50% less manure production.

• Saving in medication.

• Its swing action helps maintain water-quality and hygiene.

11300000 SWING DRINKER WITH VRH-3

17900000 SWING DRIKER MAXI

TECHNICAL DATA

Number of feeding outlets 2-3

Nº animals 25-40


TECHNICAL DATA


Nº animals 20

Animal weight, kg 250

EASY DRINKER DUO SWING DRINKER

SWING DRINKER MAXI

• The VRH-3 with sow bowl is a heavy duty drinker, specially designed for gestations.

30 31

NI-2 CORNER NI-2 CENTRAL

NI-2 Complements

The NI-2 corner creates a microclimate for the piglets, which have different temperature requirements than the sows.

The NI-2 central is removable and easy to carry if switching from place to place.

Options of regulation of the height to maximize the microclimate effect, allowing the use of bulbs with less power and lower consumption.

Heating lamps designed to be installed in NI-2 with the possibility of using bulbs with less power and lower consumption.

CLOSING FENCE WITH GATE

18800000 NI-2 CORNER 19100000 NI-2 CENTRAL

• Protects from air droughts.

• Helps to maintain the temperature that the piglets require, not affecting the sow comfort.

• Its width can be adapted.

• Accessories available: closing fence with gate and heating lamp.

• Single piece structure.

• Specially designed for easier cleaning.

• Significant energy savings.

• Compatible with incandescent heating lamp.

• View of the location of NI-2 Corner.

• The design of the inclined fix part makes the cleaning easier. • The longitudinal reinforcement bridges provides for easy cleaning of the dirt with water, washing out to the floor, avoiding water’s splashing during jet washing.

• Protects from air draughts.

• Helps to keep the temperature than the piglets require, not affecting the sow comfort.

• Easy to install. Handles for easy carrying.

• Options for height regulation.

• Internal design allows a complete access for cleaning.



• View of the location of NI-2 Central.

• Easy to set up.

• With handles to carry it.

18800015 CLOSING FENCE WITH GATE

NI-2 Complements

19100006 LONG HEATING LAMPS

19100016 SHORT HEATING LAMPS

30 31

NI-2 CORNER NI-2 CENTRAL

NI-2 Complements

The NI-2 corner creates a microclimate for the piglets, which have different temperature requirements than the sows.

The NI-2 central is removable and easy to carry if switching from place to place.

Options of regulation of the height to maximize the microclimate effect, allowing the use of bulbs with less power and lower consumption.

Heating lamps designed to be installed in NI-2 with the possibility of using bulbs with less power and lower consumption.

CLOSING FENCE WITH GATE

18800000 NI-2 CORNER 19100000 NI-2 CENTRAL

• Protects from air droughts.

• Helps to maintain the temperature that the piglets require, not affecting the sow comfort.

• Its width can be adapted.

• Accessories available: closing fence with gate and heating lamp.

• Single piece structure.

• Specially designed for easier cleaning.



• View of the location of NI-2 Corner.

• The design of the inclined fix part makes the cleaning easier. • The longitudinal reinforcement bridges provides for easy cleaning of the dirt with water, washing out to the floor, avoiding water’s splashing during jet washing.

• Protects from air draughts.

• Helps to keep the temperature than the piglets require, not affecting the sow comfort.

• Easy to install. Handles for easy carrying.

• Options for height regulation.

• Internal design allows a complete access for cleaning.



• View of the location of NI-2 Central.

• Easy to set up.

• With handles to carry it.

18800015 CLOSING FENCE WITH GATE

NI-2 Complements

19100006 LONG HEATING LAMPS

19100016 SHORT HEATING LAMPS

32 33

Dimensions: mmDimensions: mm

Slat trims are essential for a perfect floor finish.

Wean to finish (from weaning to slaughter in a same phase) improves animal health, because stress caused by the moving to the finishing facilities is avoided.

• Comfort, warmness and great resistance.

• Easy cleaning and disinfecting.

600x500

600x400

SLA0F49 600x500mm WEAN TO FINISH SLAT

15500020 600x400mm WEAN TO FINISH SLAT

SLA0F01 SLAT TRIM

1610000001 TRAP-SLAT

16101010 200x600mm SOW SLAT FOR TRAP SLAT

16100030 TRAP-SLAT LIFTING ROD

Trap door linked to a slat, which allows the excrements to be removed easily and thus maintaining the hygiene required in the farrowing pen.

• Easy to mount.

• Farrowing pens free from excrements.

• Better hygiene for the sow and the piglets.

• It makes the rapid cleaning of the farrowing pen easier.

• When the trap door is opened, it slides vertically towards the pit, thus preventing it from obstructing the cleaning the farrowing pen.

200x600 for TRAP SLAT

TECHNICAL DATA 60x40 60x50

Maximum animal weight, kg 120 120

Anti-slip surface yes yes

WEAN TO FINISH SLATS TRAP-SLAT

Slats Complements

• Can be installed in sow slats.

32 33


Slat trims are essential for a perfect floor finish.

Wean to finish (from weaning to slaughter in a same phase) improves animal health, because stress caused by the moving to the finishing facilities is avoided.

• Comfort, warmness and great resistance.

• Easy cleaning and disinfecting.

600x500

600x400

SLA0F49 600x500mm WEAN TO FINISH SLAT

15500020 600x400mm WEAN TO FINISH SLAT

SLA0F01 SLAT TRIM

1610000001 TRAP-SLAT

16101010 200x600mm SOW SLAT FOR TRAP SLAT

16100030 TRAP-SLAT LIFTING ROD

Trap door linked to a slat, which allows the excrements to be removed easily and thus maintaining the hygiene required in the farrowing pen.

• Easy to mount.

• Farrowing pens free from excrements.

• Better hygiene for the sow and the piglets.

• It makes the rapid cleaning of the farrowing pen easier.

• When the trap door is opened, it slides vertically towards the pit, thus preventing it from obstructing the cleaning the farrowing pen.

200x600 for TRAP SLAT

TECHNICAL DATA 60x40 60x50



WEAN TO FINISH SLATS TRAP-SLAT

Slats Complements

• Can be installed in sow slats.

34 35


600x800

600x400 sow slats are designed to resist extreme abuse by the sow and a time to be comfortable for both mother and piglets.

18500001 CONFORGRIP 600x800mm SOW SLAT

SLA0F70 600x400mm SOW SLAT

600x400

• Made from polypropylene with a great impact resistance, durability and flexibility.

• Due to its wide range of sizes, it allows multiple combinations.

• Comfortable and non-aggressive.

• Very hygienic.

600x300

600x200




The 600x300 sow slats are specially designed to make multiple combinations comfortable and not aggressive.

200x600

TECHNICAL DATA 20X60 60X20 60X30 60x40 60X80

Maximum animal weight, kg - 120 120 250 350

Anti-slip surface yes yes yes yes yes

Suitable for installation under sow no no no yes yes

The COMFORT GRIP slat is wider than other models (800 mm) and has a special surface: DUAL ANTI-SLIP, which allows the comfort of the sows and a better grip of piglets while suckling.

• Exclusively for farrowing.

• Usage: sows and piglets.

• Wider: 800 mm.

• With Dual Anti-Slip surface.

• Greater comfort.

• 3 points.

• Very hygienic.

• Easy to assemble.

The 200x600 Sow Slat has great resistance.


SOW SLATS SOW SLATS

34 35


600x800

600x400 sow slats are designed to resist extreme abuse by the sow and a time to be comfortable for both mother and piglets.

18500001 CONFORGRIP 600x800mm SOW SLAT


600x400


• Due to its wide range of sizes, it allows multiple combinations.

• Comfortable and non-aggressive.

• Very hygienic.

600x300

600x200





200x600

TECHNICAL DATA 20X60 60X20 60X30 60x40 60X80

Maximum animal weight, kg - 120 120 250 350

Anti-slip surface yes yes yes yes yes

Suitable for installation under sow no no no yes yes

The COMFORT GRIP slat is wider than other models (800 mm) and has a special surface: DUAL ANTI-SLIP, which allows the comfort of the sows and a better grip of piglets while suckling.

• Exclusively for farrowing.

• Usage: sows and piglets.

• Wider: 800 mm.

• With Dual Anti-Slip surface.

• Greater comfort.

• 3 points.

• Very hygienic.

• Easy to assemble.

The 200x600 Sow Slat has great resistance.


SOW SLATS SOW SLATS

36 37


200x400

SLA0F20 200x400mm WEANER SLAT



600x400

The weaner slats are the ideal flooring for the comfort of weaner pigs, stimulating rapid, injury free growing conditions.

• High durability.


• Combinable with mothering and maternity slats.

• The widest range on the market.

• Easy to clean and disinfect.

• Comfortable, animal-friendly and warm.

• Easy and quick assembly.

600x500

WEANER SLAT

These 2 models are the solution for farms requiring special sizes of the floors due to their special characteristics, thus reducing both material and labour installation costs.

100x500

100x400

• For the weaning or sow pens.

16800000 100x400mm WEANER SLAT


TECHNICAL DATA 10x40 10x50 20x40 60x40 60x50

Maximum animal weight, kg 120 120 110 110 110

Anti-slip surface yes yes - - -

1200x500 WEANER SLAT

100 WEANER SLAT

Faster set-up reducing installation and support costs.

Comfort, and grip.

• Fácil limpieza y desinfección.

1200x500Blind Slat 10% open


13500000 1200x500mm BLIND SLAT 10% OPEN

1200x500

TECHNICAL DATA 120x50 10% open



* Especial design Anti-slip for blind surface.

36 37


200x400




600x400

The weaner slats are the ideal flooring for the comfort of weaner pigs, stimulating rapid, injury free growing conditions.

• High durability.


• Combinable with mothering and maternity slats.

• The widest range on the market.

• Easy to clean and disinfect.

• Comfortable, animal-friendly and warm.

• Easy and quick assembly.

600x500

WEANER SLAT

These 2 models are the solution for farms requiring special sizes of the floors due to their special characteristics, thus reducing both material and labour installation costs.

100x500

100x400

• For the weaning or sow pens.



TECHNICAL DATA 10x40 10x50 20x40 60x40 60x50

Maximum animal weight, kg 120 120 110 110 110

Anti-slip surface yes yes - - -

1200x500 WEANER SLAT

100 WEANER SLAT

Faster set-up reducing installation and support costs.

Comfort, and grip.

• Fácil limpieza y desinfección.

1200x500Blind Slat 10% open


13500000 1200x500mm BLIND SLAT 10% OPEN

1200x500

TECHNICAL DATA 120x50 10% open




38 39


Its great size reduces costs and enlarges hygiene.

• In big installation surfaces reduces the use of profiles and installation cost.

• Due to its increased size will decrease joints between slats, avoiding dirtspots.


SLA0F90 600x600mm ROUND WEANER SLAT

SLA0F96 600x600mm OPEN BLIND SLAT 10%

18600000 600x600mm BLIND SLAT

600x600Blind 10% open

600x600 Round

600x600 Blind

Convex rib design, which facilitates evacuation of excrements and cleaning.

The 600x600 Blind Slat allows installation of large blind areas and provides the piglets in farrowing and weaning with more comfortable areas.

ROUND WEANER SLATS WEANER BLIND SLATS

600x800

• Designed to be located under feeders to recover the wasted feed.

TECHNICAL DATA 10% OPEN BLIND


Anti-slip surface yes * yes *

Convex ribs no no


TECHNICAL DATA 60x80 ROUND



Convex ribs yes yes


38 39


Its great size reduces costs and enlarges hygiene.

• In big installation surfaces reduces the use of profiles and installation cost.

• Due to its increased size will decrease joints between slats, avoiding dirtspots.


SLA0F90 600x600mm ROUND WEANER SLAT

SLA0F96 600x600mm OPEN BLIND SLAT 10%

18600000 600x600mm BLIND SLAT

600x600Blind 10% open

600x600 Round

600x600 Blind

Convex rib design, which facilitates evacuation of excrements and cleaning.

The 600x600 Blind Slat allows installation of large blind areas and provides the piglets in farrowing and weaning with more comfortable areas.

ROUND WEANER SLATS WEANER BLIND SLATS

600x800

• Designed to be located under feeders to recover the wasted feed.

TECHNICAL DATA 10% OPEN BLIND



Convex ribs no no


TECHNICAL DATA 60x80 ROUND



Convex ribs yes yes


40 41


• Highly reinforced as it has more integral unions.

• Drainage holes for quick drying after cleaning.

• Comfortable for weaners creating areas draught free areas.

• Special design for farrowing.

600x400

Used in installations of blind areas in weaning and wean to finish.

If placed under feeders helps to recover the wasted feed.

Provides the weaners with comofortable, isolated recreation areas.

SLA0F102 600x500mm BLIND SLAT


600x500

• Special design for Wean to finish.

The semi-blind slat is unique on the market that combines the open and closed areas and allows saving one support beam in a farrowing place.

The open area is one of transition between the sow and the piglets, increasing piglets grip when suckling. The blind area creates a draught-free rest area for the piglets.

600x500 B

SLA0F100 600x500mm PARTIAL BLIND SLAT “A”

SLA0F101 600x500mm PARTIAL BLIND SLAT “B”

600x500 A

TECHNICAL DATA 60X50 60X40



Convex ribs no no

* Especial design Anti-slip for blind surface.TECHNICAL DATA 60x50 A 60X50 B



Convex ribs no no





BLIND SLAT

SOW BLIND SLAT

PARTIAL BLIND SLATS

60x40 blind slat are designed to be located under sows to minimize injuries to shoulders and udders.

40 41





• Special design for farrowing.

600x400

Used in installations of blind areas in weaning and wean to finish.

If placed under feeders helps to recover the wasted feed.

Provides the weaners with comofortable, isolated recreation areas.



600x500

• Special design for Wean to finish.

The semi-blind slat is unique on the market that combines the open and closed areas and allows saving one support beam in a farrowing place.

The open area is one of transition between the sow and the piglets, increasing piglets grip when suckling. The blind area creates a draught-free rest area for the piglets.

600x500 B

SLA0F100 600x500mm PARTIAL BLIND SLAT “A”

SLA0F101 600x500mm PARTIAL BLIND SLAT “B”

600x500 A

TECHNICAL DATA 60X50 60X40



Convex ribs no no

* Especial design Anti-slip for blind surface.TECHNICAL DATA 60x50 A 60X50 B



Convex ribs no no





BLIND SLAT

SOW BLIND SLAT

PARTIAL BLIND SLATS

60x40 blind slat are designed to be located under sows to minimize injuries to shoulders and udders.

42 43


This models of big size plates allow heating areas to create microclimates of great comfort in farrowing, weaning and wean to finish. Hydraulic system.

• All the accessories required for its correct installation.

• HF20S - Controller for farrowing and weaning.

• HF20C - Regulator with switches, which allows up to 20 individuals farrowing places.

17500000 1200x400mm WATER HEATED PLATE



17500006 1200 SUPPORT PLATE (KIT 4 PIECES)

17510000 1200x400mm ELECTRIC HEATED PLATE



1450600002 600x400mm 110V/70W ELECTRIC HEATED PLATE


E0000235 HF20C/230V CONTROLLER WITH SWITCHES

E0000294 HF20S/110V CONTROLLER


TECHNICAL DATA 120X40 120X50 120X60

Capacity, L. 13 19 23

Thermal emission (maximum), W 140-170 170-190 200-220

Net weight, kg (empty) 5,8 7,0 8,7

Minimum flow (recommended) 0,5 L/min

Water temperature (maximum) 50°C

installation connetion, mm Ø15

TECHNICAL DATA 60x40 120X40 120X50 120X60

Power, W 70 120 150 180

Voltage, V 110 230

Length of the connection cable, m 4

TECHNICAL DATA HF20S HF20C

Maximum power, W 3000 3000

Maximum power x switch - 150

This models of big size plates allow heating areas to create microclimates of great comfort in farrowing, weaning and wean to finish. Electric system.

The controllers set voltage supplied to the plates: a higher voltage, higher temperature.

1200x400 1200x4001200x500 1200x500

600x400

1200x600 1200x600

• Versatile design of the installation thanks to multiple sizes of the heated plates as they fit with any slat system.

• No air bubbles inside the plate thanks to its easy filling and special “non-air” closing tap.

• Optimal temperature distribution on the plate surface.

• Comfortable with anti-slipping surface.

• Extremely efficient due to the plastic construction. The water heated plate uses very little energy.

• Simplified control system due to wide temperature and pressure range of the plate.

• Its solid structure and the “out-dirt” support make the plate very robust, hygienic and easy to clean.

• By design and operating system are compatible with other heating circuits.

• The special design of the easy to install “out-dirt” panel support makes it much more hygienic as it prevents a build-up of dirt. It comes as a four-part kit.

The special design of the easy to install “out-dirt” panel support. It comes as a four-part kit.

• Allows individual switching off of the plates.

• Low power consumption.

• Very comfortable for the piglets.

• Very resistant, even to the sow step.

• Without corners for an easy cleaning.


WATER HEATED PLATES ELECTRIC HEATED PLATES

Heated Plates Complements


42 43


This models of big size plates allow heating areas to create microclimates of great comfort in farrowing, weaning and wean to finish. Hydraulic system.

• All the accessories required for its correct installation.

• HF20S - Controller for farrowing and weaning.

• HF20C - Regulator with switches, which allows up to 20 individuals farrowing places.








1450600002 600x400mm 110V/70W ELECTRIC HEATED PLATE


E0000235 HF20C/230V CONTROLLER WITH SWITCHES



TECHNICAL DATA 120X40 120X50 120X60

Capacity, L. 13 19 23

Thermal emission (maximum), W 140-170 170-190 200-220

Net weight, kg (empty) 5,8 7,0 8,7

Minimum flow (recommended) 0,5 L/min

Water temperature (maximum) 50°C

installation connetion, mm Ø15

TECHNICAL DATA 60x40 120X40 120X50 120X60

Power, W 70 120 150 180

Voltage, V 110 230

Length of the connection cable, m 4

TECHNICAL DATA HF20S HF20C

Maximum power, W 3000 3000

Maximum power x switch - 150

This models of big size plates allow heating areas to create microclimates of great comfort in farrowing, weaning and wean to finish. Electric system.

The controllers set voltage supplied to the plates: a higher voltage, higher temperature.

1200x400 1200x4001200x500 1200x500

600x400

1200x600 1200x600

• Versatile design of the installation thanks to multiple sizes of the heated plates as they fit with any slat system.

• No air bubbles inside the plate thanks to its easy filling and special “non-air” closing tap.

• Optimal temperature distribution on the plate surface.


• Extremely efficient due to the plastic construction. The water heated plate uses very little energy.

• Simplified control system due to wide temperature and pressure range of the plate.

• Its solid structure and the “out-dirt” support make the plate very robust, hygienic and easy to clean.

• By design and operating system are compatible with other heating circuits.

• The special design of the easy to install “out-dirt” panel support makes it much more hygienic as it prevents a build-up of dirt. It comes as a four-part kit.

The special design of the easy to install “out-dirt” panel support. It comes as a four-part kit.

• Allows individual switching off of the plates.

• Low power consumption.

• Very comfortable for the piglets.

• Very resistant, even to the sow step.

• Without corners for an easy cleaning.


WATER HEATED PLATES ELECTRIC HEATED PLATES



4544

Dimensions: mm

• It improves sows welfare as it dissipates the heat.

• Perfect combination with plastic slats.

Cast iron slat Anti-slip is an ideal floor element for lactating sows.

600x600

600x400

SLA0G10 600x400mm CAST IRON ANTI-SLIP SLAT


EBEN

The Ferrocast® slats are made from high quality cast iron in a patented manufacturing process, which absolutely guarantees smooth surface transitions and wear resistant surfaces.

• Ferrocast® slats are available in level bed and elevated (15 mm) bed sections and fully integrate with our plastic slats.

• Avoids any injuries of the udders and hoofs.

• Elevated slats make suckling from the bottom teats easier and help to avoid piglets crushing.

• It allows that the sow to dissipates body heat better.

• Round shape rods facilitates the evacuation of excrements, improving cleaniness.

SLA0G37 600x600mm PE FERROCAST SLAT

SLA0G38 1200x600mm PROFIL-EBEN FERROCAST SLAT


SLA0G35 1200x600mm PROFIL-STEP FERROCAST SLAT


STEP

• Very easy installation from the top surface by one person.

• Secure fixing, to strongest parts of slats, reduces damage.

• Synthetic washer for load distribution and prevention of slat wear.

• Long guaranteed lifespan, entirely made of non-corrosive materials.

• The stainless steel bolts are provided with special glue treatment.

• The Ergofix slat anchors are installed simply from the top surface of synthetic and concrete slatted floors for fixation of feeders and farrowing crates, etc. without the need for installation tools. PLÁSTICO Ø8 mmCEMENTO Ø10 mm

Ergofix slat anchors have been designed to overcome installation problems arising from current anchoring systems.

• Gives a comfortable resting area. Creates a micro-climate avoiding draughts.

• Easy and quick assembly from the top surface.

• Possibility of disassembly after installation.

• Adaptable to any length of the slot between ribs of concrete slat.

• It is made from polypropylene and contains a textured surface with small ribs to prevent slippage.

ERG0G10 ERGOFIX PLASTIC

ERG0G11 ERGOFIX CONCRETE

• The Ergofix Plastic needs minimum slot width of 9.5 mm.

• The Ergofix Concrete needs minimum slot width of 16 mm.

CLI0F10 CLICK IN Click-in is perfect to adapt concrete flooring to welfare regulations.

Designed to cover concrete slats slots, making ribs wider to fit welfare regulations.

CAST IRON ANTI-SLIP

CAST IRON FERROCAST ERGOFIX

CLICK-IN

TECHNICAL DATA

Maximum animal weight, kg 350

Anti-slip surface yes

TECHNICAL DATA



LEVEL BED ELEVATED

4544

Dimensions: mm

• It improves sows welfare as it dissipates the heat.

• Perfect combination with plastic slats.

Cast iron slat Anti-slip is an ideal floor element for lactating sows.

600x600

600x400



EBEN

The Ferrocast® slats are made from high quality cast iron in a patented manufacturing process, which absolutely guarantees smooth surface transitions and wear resistant surfaces.

• Ferrocast® slats are available in level bed and elevated (15 mm) bed sections and fully integrate with our plastic slats.

• Avoids any injuries of the udders and hoofs.

• Elevated slats make suckling from the bottom teats easier and help to avoid piglets crushing.

• It allows that the sow to dissipates body heat better.

• Round shape rods facilitates the evacuation of excrements, improving cleaniness.

SLA0G37 600x600mm PE FERROCAST SLAT





STEP

• Very easy installation from the top surface by one person.

• Secure fixing, to strongest parts of slats, reduces damage.

• Synthetic washer for load distribution and prevention of slat wear.

• Long guaranteed lifespan, entirely made of non-corrosive materials.

• The stainless steel bolts are provided with special glue treatment.

• The Ergofix slat anchors are installed simply from the top surface of synthetic and concrete slatted floors for fixation of feeders and farrowing crates, etc. without the need for installation tools. PLÁSTICO Ø8 mmCEMENTO Ø10 mm

Ergofix slat anchors have been designed to overcome installation problems arising from current anchoring systems.

• Gives a comfortable resting area. Creates a micro-climate avoiding draughts.

• Easy and quick assembly from the top surface.

• Possibility of disassembly after installation.

• Adaptable to any length of the slot between ribs of concrete slat.

• It is made from polypropylene and contains a textured surface with small ribs to prevent slippage.

ERG0G10 ERGOFIX PLASTIC

ERG0G11 ERGOFIX CONCRETE

• The Ergofix Plastic needs minimum slot width of 9.5 mm.

• The Ergofix Concrete needs minimum slot width of 16 mm.

CLI0F10 CLICK IN Click-in is perfect to adapt concrete flooring to welfare regulations.

Designed to cover concrete slats slots, making ribs wider to fit welfare regulations.

CAST IRON ANTI-SLIP

CAST IRON FERROCAST ERGOFIX

CLICK-IN

TECHNICAL DATA



TECHNICAL DATA



LEVEL BED ELEVATED

46 47

• Made of fibre glass with isoftalic resin that guarantees an extraordinary resistance to corrosive livestock environments.

• New profile design, prevents accumulation of excrements.

• High bending resistance and stability in horizontal direction.

• Total hygiene.

Delta Beams 120 and 135 are profiles made from pultruded fiber-glass profiles specially designed to support slats in farrowing and weaners facilities. These support beams are a perfect substitute for the traditional steel bars, as they are completely resistant to the corrosive environment caused by manure and the livestock environment.

Silent Block caps are available for both ends of the beams to provide stable support surfaces and load dampening over the 5 cm wide lay up edges.

Beam Delta has perfect horizontal stability and its surface with no flanges does not accumulate feces.

DEL0G24 120 mm DELTA BEAM PROFILE


DEL0G23 SILENT BLOCK CAP

• Silent Block must be installed with Delta Beam.

The new beam T-120, gives more advantages due to 2 basic improvements: the longitudinal rib, essential for reducing lateral torsion and a big base, that allows a better seating on the support points.

• Very secure fixing to the wall.

• Important savings in renovations, as it is not necessary either to enlarge pits or brickwork.

Delta Net is the only tilting flooring system, which provides livestock producers to gain access to the most difficult to clean areas, providing perfect hygiene and disinfection.

DEL0G40 90 mm T PROFILE


DEL0G10 DELTA-NET HINGE

DEL0G11 DELTA-NET SILENT BLOCK CAP

DEL0G12 DELTA-NET CONNECTION PROFILE

GANXODELTA DELTA NET SUSPENSION HOOK

DEL0G30 DELTA NET SPECIAL PULLEY

UNIODELTAN DELTA NET CONNECTION PROFILE JOINT

• Available in 90 mm and 120 mm heights.

• Made from isotholic resin, which guarantees an extraordinary resistance to corrosive livestock environments.

• Resistant to corrosion caused by manure.

• This support can be used for the two kinds of supports: central and final. Increasing the number of supports we reduce the force over the beams and can use shorter beams.

• The Basic Post can be used for long beams or also in farrowing places, allowing the use of shorter profiles reducing the costs.

The most profitable support point.

14000001 BPB KIT FOR PIPE (0-110mm)

14000060 BPB PIPE TO 371mm



14000300 Ø35x2,7x3000mm BPB PIPE

14000100 5mm METAL BEAM GUIDE

• A Basic Post Beam accessory used to support metal beams.

• Multi positioning for maximum versatility.

• It can also be used on concrete walls.

• Delta Beam profiles must be cut in central supports.

• It is obligatory to install Silent Block with Delta Beam to avoid its direct contact with the concrete base.

• DO NOT FIX the profile with cement to the wall.

IMPORTANT: ROTECNA DOES NOT WARRANT THE PROFILES IF THEY ARE NOT INSTALLED ACCORDING TO THIS DRAWING.

• Easy to lift whenever and as often as needed.

• Great resistance and durability with corrosion resistant components.

The Basic Post works as a support for the profiles.

• Easier cleaning.

• Wider range of applications.

• A perfect stability and great resistance.

DELTA BEAM PROFILE T PROFILE

BASIC POST BEAM

DELTA NET

• Easy installation. Adjustable to the height of any pit.

• The height is easy to settle once installed.

• Without support walls.

• Totally resistant against corrosion.

• Clean, avoiding excrements in the corners.

• Economic.

Metals beams guide

TECHNICAL DATA FARROWING WEANER

Drain widht, cm / Slats 400 600 400 500 600

140-180 120 120 120 120 120

180-200 120 120 120 120 120

200-220 120 120 120 120 120

220-240 120 120 120 120 120

240-260 135 135 120 120 120

260-280 - - 120 135 135

280-300 - - 135 135 135



140-180 120 120 90 90 90

180-200 120 120 90 90 120

200-220 120 120 90 120 120

220-240 120 120 120 120 120

240-260 - - 120 120 120

260-280 - - 120 120 -

46 47

• Made of fibre glass with isoftalic resin that guarantees an extraordinary resistance to corrosive livestock environments.

• New profile design, prevents accumulation of excrements.

• High bending resistance and stability in horizontal direction.

• Total hygiene.

Delta Beams 120 and 135 are profiles made from pultruded fiber-glass profiles specially designed to support slats in farrowing and weaners facilities. These support beams are a perfect substitute for the traditional steel bars, as they are completely resistant to the corrosive environment caused by manure and the livestock environment.

Silent Block caps are available for both ends of the beams to provide stable support surfaces and load dampening over the 5 cm wide lay up edges.

Beam Delta has perfect horizontal stability and its surface with no flanges does not accumulate feces.



DEL0G23 SILENT BLOCK CAP

• Silent Block must be installed with Delta Beam.

The new beam T-120, gives more advantages due to 2 basic improvements: the longitudinal rib, essential for reducing lateral torsion and a big base, that allows a better seating on the support points.

• Very secure fixing to the wall.

• Important savings in renovations, as it is not necessary either to enlarge pits or brickwork.

Delta Net is the only tilting flooring system, which provides livestock producers to gain access to the most difficult to clean areas, providing perfect hygiene and disinfection.



DEL0G10 DELTA-NET HINGE

DEL0G11 DELTA-NET SILENT BLOCK CAP

DEL0G12 DELTA-NET CONNECTION PROFILE

GANXODELTA DELTA NET SUSPENSION HOOK

DEL0G30 DELTA NET SPECIAL PULLEY

UNIODELTAN DELTA NET CONNECTION PROFILE JOINT

• Available in 90 mm and 120 mm heights.

• Made from isotholic resin, which guarantees an extraordinary resistance to corrosive livestock environments.

• Resistant to corrosion caused by manure.

• This support can be used for the two kinds of supports: central and final. Increasing the number of supports we reduce the force over the beams and can use shorter beams.

• The Basic Post can be used for long beams or also in farrowing places, allowing the use of shorter profiles reducing the costs.

The most profitable support point.

14000001 BPB KIT FOR PIPE (0-110mm)




14000300 Ø35x2,7x3000mm BPB PIPE

14000100 5mm METAL BEAM GUIDE

• A Basic Post Beam accessory used to support metal beams.

• Multi positioning for maximum versatility.

• It can also be used on concrete walls.

• Delta Beam profiles must be cut in central supports.

• It is obligatory to install Silent Block with Delta Beam to avoid its direct contact with the concrete base.

• DO NOT FIX the profile with cement to the wall.

IMPORTANT: ROTECNA DOES NOT WARRANT THE PROFILES IF THEY ARE NOT INSTALLED ACCORDING TO THIS DRAWING.

• Easy to lift whenever and as often as needed.

• Great resistance and durability with corrosion resistant components.

The Basic Post works as a support for the profiles.

• Easier cleaning.

• Wider range of applications.

• A perfect stability and great resistance.

DELTA BEAM PROFILE T PROFILE

BASIC POST BEAM

DELTA NET

• Easy installation. Adjustable to the height of any pit.

• The height is easy to settle once installed.

• Without support walls.

• Totally resistant against corrosion.

• Clean, avoiding excrements in the corners.

• Economic.

Metals beams guide



140-180 120 120 120 120 120

180-200 120 120 120 120 120

200-220 120 120 120 120 120

220-240 120 120 120 120 120

240-260 135 135 120 120 120

260-280 - - 120 135 135

280-300 - - 135 135 135



140-180 120 120 90 90 90

180-200 120 120 90 90 120

200-220 120 120 90 120 120

220-240 120 120 120 120 120

240-260 - - 120 120 120

260-280 - - 120 120 -

48 49

• This modular PVC penning system for farrowing and weaner accommodation offers a wide range of options in pen heights and can be made to any length.

• The connections of the PVC profiles are ultrasonic welded, which guarantees optimum strength and rigidity.

• Due to the absence of spaces where dirt can accumulate, optimum cleaning and hygienic conditions are obtained.

70 cm(50+10 cm)

75 cm(3x10+25 cm)

75 cm(50+25 cm)

70 cm(1x70 cm)

50 cm(1x50 cm)

• Ideal for rooms in livestock buildings.

• Range of sizes.

• Made from PVC and stainless steel.

• Available with inspection windows.

• Easy installation.

• Durability.

12400090 700mm PVC PROFILE FLAT TOP AND BASE


12400060 500mm PVC PROFILE MALE TOP/FLAT BASE

PRO0I11 250mm PVC PROFILE MALE TOP/FEMALE BASE

PRO0I12 250mm PVC PROFILE FLAT TOP/FEMALE BASE


PRO0I14 “U” PVC PROFILE END CAP

PRO0I16 “Y” PVC PROFILE END CAP

PRO0I15 HINGE PVC PROFILE END CAP

PRO0I17 40mm “U” PULTRUDED FIBRE-GLASS PROFILE

PRO0I18 30mm FLAT PULTRUDED FIBRE-GLASS PROFILE

Locking and hinging system for PVC farrowing and weaning pen dividers.

Components

Components

• Easy handling.

Solid Grip the ideal complement to assist handling of PVC panels.

Cone shaped hooks to facilitate closing.

Hook Bracket.

Hinge Bracket.

Safety latch with spring.

Wall Bracket.

• Entirely made from stainless steel components.

• Easy handling can be closed with one hand only.

• Safety latches for weaner pens.

• Great rigidity and resistance to breakage.

• Designed open flat surfaces to eliminate dirt accumulation.


Flared hinge brackets.

GANXOCURTI HOOK BRACKET

GANXOLLARG LONG HOOK BRACKET

SEPARADOR1 DOUBLE HINGE BRACKET

SEPARADOR2 SINGLE HINGE BRACKET FOR PULTRUDED PROFILE

SEPARADOR3 DOUBLE HINGE BRACKET FOR PULTRUDED PROFILE

SEGUROINOX LOCKING PLATE

MOTLLAFASTL LOCKING PLATE SPRING

12501000 500mm STAINLESS STEEL “U” HOOK BRACKET

12503000 500mm STAINLESS STEEL “U” HINGE BRACKET

12502000 500mm STAINLESS STEEL “U” WALL BRACKET







12500140 500mm STAINLESS STEEL “U” BRACKET


12510000 500mm STAINLESS STEEL “H” BRACKET


12500130 LOCKING PLATE


SOLIDGRIP SOLID GRIP

PVC PEN DIVIDER PLANKS

OPEN & CLOSED PEN DIVIDERS

MODULAR PVC PENNING SYSTEM

MODULAR PVC ACCESSORIES

SS U BRACKETS

FAST LOCK BRACKETS

DOORS

48 49

• This modular PVC penning system for farrowing and weaner accommodation offers a wide range of options in pen heights and can be made to any length.

• The connections of the PVC profiles are ultrasonic welded, which guarantees optimum strength and rigidity.

• Due to the absence of spaces where dirt can accumulate, optimum cleaning and hygienic conditions are obtained.

70 cm(50+10 cm)

75 cm(3x10+25 cm)

75 cm(50+25 cm)

70 cm(1x70 cm)

50 cm(1x50 cm)

• Ideal for rooms in livestock buildings.

• Range of sizes.

• Made from PVC and stainless steel.

• Available with inspection windows.

• Easy installation.

• Durability.



12400060 500mm PVC PROFILE MALE TOP/FLAT BASE

PRO0I11 250mm PVC PROFILE MALE TOP/FEMALE BASE



PRO0I14 “U” PVC PROFILE END CAP

PRO0I16 “Y” PVC PROFILE END CAP

PRO0I15 HINGE PVC PROFILE END CAP

PRO0I17 40mm “U” PULTRUDED FIBRE-GLASS PROFILE

PRO0I18 30mm FLAT PULTRUDED FIBRE-GLASS PROFILE

Locking and hinging system for PVC farrowing and weaning pen dividers.

Components

Components

• Easy handling.

Solid Grip the ideal complement to assist handling of PVC panels.

Cone shaped hooks to facilitate closing.

Hook Bracket.

Hinge Bracket.


Wall Bracket.

• Entirely made from stainless steel components.

• Easy handling can be closed with one hand only.

• Safety latches for weaner pens.

• Great rigidity and resistance to breakage.

• Designed open flat surfaces to eliminate dirt accumulation.


Flared hinge brackets.

GANXOCURTI HOOK BRACKET

GANXOLLARG LONG HOOK BRACKET

SEPARADOR1 DOUBLE HINGE BRACKET

SEPARADOR2 SINGLE HINGE BRACKET FOR PULTRUDED PROFILE

SEPARADOR3 DOUBLE HINGE BRACKET FOR PULTRUDED PROFILE

SEGUROINOX LOCKING PLATE















12500130 LOCKING PLATE


SOLIDGRIP SOLID GRIP

PVC PEN DIVIDER PLANKS

OPEN & CLOSED PEN DIVIDERS

MODULAR PVC PENNING SYSTEM

MODULAR PVC ACCESSORIES

SS U BRACKETS

FAST LOCK BRACKETS

DOORS

50 51

Perfect flow and distribution of feed, both pellets and meal, simple and economic, perfect operation.

The silo outlet consists of a silo boot with a 2-position cut off slide for horizontal and inclined installations.

Individual opening and closing of the drop kits, hermetically sealed to moisture and dust, is made easy from ground level. Down tubes with telescopic ends that allow individual adjustment of the hopper capacity.

Ø 55 mm

Ø 90 mm

Ø 75 mm

Motorized drive unit are equipped with a tongue switch and a final outlet with a large diameter to avoid feed blockages.

Compact motor constructed from corrosion resistant materials.

Ø 55 mm

Ø 90 mm

Ø 75 mm

Silo outlets with 1, 2 or 3 augers combined with a single or double silo boots can service very complex installations with up to 6 feed transport lines per silo.

Easy adjustable chain tensioning system with graduation scale.

No feed build up.

Easy to open, without tools.

Ø 60mm Drop kit.

Shock absorbing teeth, extending the life of the chain and disks.

Silo extraction system with an agitator.

Zinc-plated steel chain.

• Ø 38 mm

• Ø 44 mm

Ø 60mm Drop kit.

• Ø 38 mm

• Ø 44 mm

ARROY13 50 DRIVE UNIT


ARROY01 50 CORNER

ARROY02 60 CORNER

CAZN380000 38mm Ø DISK ZINC-PLATED STEEL CHAIN


CACN380000 38mm Ø DISK NITRURATED CARBON CHAIN


• Conveyor drive unit with stainless steel body.

• Drive wheel with individual mounted and shock absorbing teeth to avoid breakages.

• Easy adjustable chain tensioning system with visual graduation scale.

• Corner wheels with self-cleaning pulleys.

• Easy to assemble and disassemble corner wheels, by means of turn clips, no tools required.

SYSTEM AUGER SETS CHAIN & DISK SYSTEM SETS

50 51

Perfect flow and distribution of feed, both pellets and meal, simple and economic, perfect operation.

The silo outlet consists of a silo boot with a 2-position cut off slide for horizontal and inclined installations.

Individual opening and closing of the drop kits, hermetically sealed to moisture and dust, is made easy from ground level. Down tubes with telescopic ends that allow individual adjustment of the hopper capacity.

Ø 55 mm

Ø 90 mm

Ø 75 mm

Motorized drive unit are equipped with a tongue switch and a final outlet with a large diameter to avoid feed blockages.

Compact motor constructed from corrosion resistant materials.

Ø 55 mm

Ø 90 mm

Ø 75 mm

Silo outlets with 1, 2 or 3 augers combined with a single or double silo boots can service very complex installations with up to 6 feed transport lines per silo.

Easy adjustable chain tensioning system with graduation scale.

No feed build up.

Easy to open, without tools.

Ø 60mm Drop kit.

Shock absorbing teeth, extending the life of the chain and disks.

Silo extraction system with an agitator.

Zinc-plated steel chain.

• Ø 38 mm

• Ø 44 mm

Ø 60mm Drop kit.

• Ø 38 mm

• Ø 44 mm



ARROY01 50 CORNER

ARROY02 60 CORNER





• Conveyor drive unit with stainless steel body.

• Drive wheel with individual mounted and shock absorbing teeth to avoid breakages.

• Easy adjustable chain tensioning system with visual graduation scale.

• Corner wheels with self-cleaning pulleys.

• Easy to assemble and disassemble corner wheels, by means of turn clips, no tools required.

SYSTEM AUGER SETS CHAIN & DISK SYSTEM SETS

60

60

60

60

60

6060

60

60

60

60

60

120

60

60

60

120

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

120

120

120

120

60

60

60

60

60

60

60

60

60

60

60

60

10

20

60

60

60

80

80

60

60

60

6040

50

50

40

50

50

30

20

20

20

60

80

60

60

80

60

50

50

50

50

40

40

60 60 60 60

6060

40

40

40

40 30 20

4050

50

50

50

50

50

50

4040

100 100

120 120

120

120

20

20

170x240 180x240

52 53

COMBINATIONS FOR FARROWING PENS SLATS RANGE

SOW SLATS

WEANER SLATS

BLIND & PARTIALY BLIND SLATS

WEAN TO FINISH SLATS

IRON CAST ANTI-SLIP

HEATED PLATESWaterElectric

FERROCAST® SLATS

60

60

60

60

60

6060

60

60

60

60

60

120

60

60

60

120

60

60

60

60

60

60

60

60

60

60

60

60

60

60

60

120

120

120

120

60

60

60

60

60

60

60

60

60

60

60

60

10

20

60

60

60

80

80

60

60

60

6040

50

50

40

50

50

30

20

20

20

60

80

60

60

80

60

50

50

50

50

40

40

60 60 60 60

6060

40

40

40

40 30 20

4050

50

50

50

50

50

50

4040

100 100

120 120

120

120

20

20

170x240 180x240

52 53

COMBINATIONS FOR FARROWING PENS SLATS RANGE

SOW SLATS

WEANER SLATS

BLIND & PARTIALY BLIND SLATS

WEAN TO FINISH SLATS

IRON CAST ANTI-SLIP

HEATED PLATESWaterElectric

FERROCAST® SLATS

54 55

54 55

Official Distributor:

ROTECNA, S.A.Polígono Industrial, s/n, nave nº3 · 25310 Agramunt (Lleida) SPAIN

Tel. +34 973 39 12 67 · Fax: +34 973 39 12 32e·mail: [email protected] · www.rotecna.com

Date post:	12-Mar-2016
Category:	Documents
Upload:	rotecna-sa
View:	217 times
Download:	1 times

Rotecna - Catalogue

Documents