Date post: | 30-Dec-2015 |
Category: |
Documents |
Upload: | ciprianlazar |
View: | 103 times |
Download: | 3 times |
Router Firmware Upgrade
Contents
Linksys CHECKING THE FIRMWARE VERSION OF YOUR ROUTER ...................................................................... 5
DOWNLOADING THE FIRMWARE ................................................................................................................ 5
TAKING NOTE OF YOUR CURRENT SETTINGS.......................................................................................... 9
PERFORMING THE UPGRADE ..................................................................................................................... 9
COMPLETING THE FIRMWARE UPGRADE ............................................................................................... 13
Valet CHECKING THE FIRMWARE VERSION OF YOUR ROUTER .................................................................... 14
DOWNLOADING THE FIRMWARE .............................................................................................................. 15
TAKING NOTE OF YOUR CURRENT SETTINGS........................................................................................ 18
PERFORMING THE UPGRADE ................................................................................................................... 18
COMPLETING THE FIRMWARE UPGRADE ............................................................................................... 21
Dealing with a Zipped File Format CHECKING THE FIRMWARE VERSION OF YOUR ROUTER .................................................................... 22
DOWNLOADING THE FIRMWARE .............................................................................................................. 22
TAKING NOTE OF YOUR CURRENT SETTINGS........................................................................................ 26
PERFORMING THE UPGRADE ................................................................................................................... 26
COMPLETING THE FIRMWARE UPGRADE ............................................................................................... 30
____________________________________________________________________________________________
Firmware updates are regularly posted on the Cisco website. These updates may include bug fixes and functionality
enhancements to the router. If you are experiencing problems with your router, you may upgrade or re-flash the
firmware to fix them.
IMPORTANT: Before proceeding with the upgrade, your computer must have an active Internet connection. It is
strongly recommended that you use a wired computer when upgrading the router’s firmware.
It is also important for you to determine the model number of your router to identify which set of instructions will be
suitable for your concern. For instructions on getting your router’s model number, click here. Below is the list of
wired and wireless routers with their corresponding firmware file format:
Model Number
Product Description Format Section
BEFSR11 EtherFast® Cable/DSL Router .bin Linksys
BEFSR41 EtherFast® Cable/DSL Router with 4-Port Switch
v4.3 - .zip v4.2 - .bin v4.1 - .bin v4.0 - .bin v3.0 - .bin v2.0 - .bin v1.0 - .bin
Dealing with a Zipped File Format Linksys
BEFSR41W EtherFast® Cable/DSL Wireless Ready Router with 4-port Switch
.zip Dealing with a Zipped File Format
BEFSR81 EtherFast® Cable/DSL Router with 8-Port Switch
.bin Linksys
BEFSRU31 EtherFast® Cable/DSL Router with USB and 3-Port Switch
.bin Linksys
BEFSX41 Instant Broadband EtherFast® Cable/DSL Firewall Router with 4 Port-Switch/VPN EndPoint
.bin Linksys
BEFVP41 EtherFast® Cable/DSL vPN Router with 4 Port 10/100 Switch
v2.1 - .bin v2.0 - .bin v1.0 - .zip
Linksys Dealing with a Zipped File Format
BEFW11P1 EtherFast ® Wireless AP + Cable/DSL Router w/PrintServer
.zip Dealing with a Zipped File Format
BEFW11S4 Wireless-B Broadband Router v4.0 - .bin v3.2 - .bin v3.0 - .bin v2.0 - .bin v1.0 - .zip
Linksys Dealing with a Zipped File Format
E1000 Wireless-N Router .bin Linksys
E1200 Wireless-N Router .bin Linksys
E1500 Wireless-N Router with SpeedBoost
.bin Linksys
E2000 Advanced Wireless-N Router .bin Linksys
E2100L Advanced Wireless-N Router .bin Linksys
E2500 Advanced Dual-Band N Router .bin Linksys
E3000 High Performance Wireless-N Router
.bin Linksys
E3200 High Performance Dual-Band N Router
.bin Linksys
E4200 Maximum Performance Wireless-N
.bin Linksys
EFROU44 EtherFast® 4-Port 10/100 Analog Router
No Firmware download available
HR200 Home Wireless-G Router No Firmware download available
M10 Valet .bin Valet
M20 Valet Plus .bin Valet
RT042 Broadband Router with QoS .rmt Linksys
RT41-BU Wired Broadband Router .bin Linksys
WMR200N MoCA Router (WMR200N) .bin Linksys
WRH54G Wireless-G Home Router .zip Dealing with a Zipped File Format
WRK54G Wireless-G Broadband Router .bin Linksys
WRT100 RangePlus Wireless Router .bin Linksys
WRT110 RangePlus Wireless Router .bin Linksys
WRT120N Wireless-N Home Router .bin Linksys
WRT150N Wireless-N Home Router v1.0 - .bin v1.1 - .zip
Linksys Dealing with a Zipped File Format
WRT160N Ultra RangePlus Wireless-N Broadband Router
.bin Linksys
WRT160NL Wireless-N Broadband Router with Storage Link
.bin Linksys
WRT300N Wireless-N Broadband Router .bin Linksys
WRT310N Wireless-N Gigabit Router .bin Linksys
WRT320N Dual-Band Wireless-N Gigabit Router
.bin Linksys
WRT330N Wireless-N Gigabit Gaming Router
.bin Linksys
WRT350N Wireless-N Gigabit Router with Storage Link
v1 - .bin v2 - .zip
Linksys Dealing with a Zipped File Format
WRT400N Simultaneous Dual-Band Wireless-N
.bin Linksys
WRT51AB Dual-Band Wireless A+B Broadband
No Firmware download available
WRT54AG Dual-Band Wireless A/G Broadband Router
.trx Linksys
WRT54G Wireless-G Broadband Router v1.0 - .zip v1.1 - .zip v2.0 - .zip v2.2 - .zip v3.0 - .zip v3.1 - .zip v4.0 - .zip v5.0 - .bin v6.0 - .bin v8.0 - .bin v8.1 - .bin v8.2 - .bin
Dealing with a Zipped File Format Linksys
WRT54G2 Wireless-G Broadband Router .bin Linksys
WRT54G3G Wireless-G Broadband Router No Firmware download available
WRT54G3G-AT
Wireless-G Router for 3G/UMTS Broadband
.bin Linksys
WRT54G3G-ST
Wireless-G Router for 3G/UMTS Broadband
.bin Linksys
WRT54G3Gv2-ST
Wireless-G Router for 3G/UMTS Broadband
.bin Linksys
WRT54G3Gv2-vF
Wireless-G Router for Mobile No Firmware download available
WRT54G3G-vN
Wireless-G Router for 3G/UMTS Broadband
.bin Linksys
WRT54GC Wireless-G Router for 3G/UMTS Broadband
.zip Dealing with a Zipped File Format
WRT54GH Wireless-G Broadband Router with SRX400
No Firmware download available
WRT54GL Compact Wireless-G Broadband Router
v1.0 - .zip v1.1 - .bin
Dealing with a Zipped File Format Linksys
WRT54GR Wireless-G Broadband Router with 2 Phone Ports
.bin Linksys
WRT54GS Wireless-G Broadband Router with RangeBooster™
.bin Linksys
WRT54GS2 Wireless-G Broadband Router with SpeedBooster™
.bin Linksys
WRT54GX Wireless-G Broadband Router with SpeedBooster™
.bix Linksys
WRT54GX2 Wireless-G Broadband Router with SRX
.bix Linksys
WRT54GX4 Wireless-G Broadband Router with SRX200
.bix Linksys
WRT55AG Wireless-G Home Router with SpeedBurst
v1.0 - .zip v2.0 - .fim
Dealing with a Zipped File Format Linksys
WRT600N Dual Band Wireless A+G BroadBand Router
.bin Linksys
WRT610N Dual-Band Wireless-N Gigabit Router with Storage Link
.bin Linksys
WRTSL54GS Wireless-G Broadband Router with 2 Phone Ports
.bin Linksys
WRTU54G-TM Wireless-G Media Storage Link Router with 2 Phone Ports
.bin Linksys
WTR54GS Wireless Signal Booster .zip Dealing with a Zipped File Format
LINKSYS
Checking the firmware version of your router
Step 1:
Access the router’s web-based setup page. To do this, launch a web browser such as Internet Explorer or
Safari. Enter your router’s IP Address on the address bar, then press [Enter]. When the login prompt
appears, enter your router’s User name and Password.
NOTE: The default IP Address of Linksys routers is “192.168.1.1”. For instructions on how to check the IP address of your router, click here.
IMPORTANT: The default User name and Password is “admin” but if you have used Cisco Connect to set
up your router, you may have to open the software to retrieve them. To retrieve your router User name and Password through Cisco Connect, go to Router Settings > Advanced Settings.
Step 2: On the router’s Setup page, check the upper right corner of the screen for the firmware version.
Downloading the firmware
Step 1:
Go to the Cisco HomeSupport page.
Step 2:
In the Search Support box, enter the model number of your router then press [Enter]. For instructions on
getting your router’s model number, click here.
NOTE: In this example, we used the E4200.
Step 3:
Once the page opens, click the Downloads tab.
Step 4:
Click the drop-down arrow and select the correct version of your router. To learn how to check the hardware
version, click here.
Step 5:
Click Download under Firmware to download the latest firmware of your router.
NOTE: If the current firmware version of your router matches the one found online, upgrading is not
necessary.
Step 6:
Click Save in the File Download dialog box that appears, choose an accessible directory such as the
Desktop and click Save. Once the download is complete, click Close, if prompted.
NOTE: Image may vary depending on the operating system of your computer.
If you're using a Mac computer, click Download in the dialogue box that appears. When the download has
been completed, click the red button to close the window.
The name of the file may vary depending on the firmware file of your router.
Taking note of your current settings
After upgrading the router’s firmware, a reset needs to be done which will require you to reconfigure your settings from scratch. Be sure to note down important settings before resetting the router and use it as basis for reconfiguring the router later. NOTE: You can use the back-up and restore configuration feature of your router before resetting so as not to go
through the whole process of reconfiguration. However, firmware upgrades sometimes include added functionalities which might mess up the settings once restored from a backup. In case this happens, you might have to manually reconfigure the router.
Performing the Upgrade
Step 1:
Access the router’s web-based setup page.
Step 2:
Click the Administration tab.
Step 3:
Click the Firmware Upgrade sub-tab then click the Browse button.
Step 4:
Locate the firmware then click Open.
Step 6:
Once the upgrade is complete, the following message will appear. Click on Continue.
Completing the firmware upgrade
Step 1: Close Internet Explorer or Safari.
Step 2: Press and hold the Reset button of your router for 10 seconds.
NOTE: If the image of your router is different from the one shown above, consult your router documentation
for the location of the reset button. For older routers (WRT series), you may need to hold the reset button up to 30 seconds or until the power LED blinks.
Step 3: Powercycle the router. To do this, unplug the power cord and wait 10 seconds before plugging it back in.
The firmware upgrade process is now complete.
VALET
Checking the firmware version of your router
Step 1: Access the Hotspot’s web-based setup page. To do this, launch a web browser such as Internet Explorer
or Safari. Enter your hotspot’s IP Address on the address bar, then press [Enter]. Once the login prompt
appears, enter your router’s User name and Password.
NOTE: The default IP Address of Linksys routers is “192.168.1.1”. To view instructions on how to check the
IP address of your router, click here.
IMPORTANT: The default User name and Password is “admin” but if you have used Cisco Connect to set
up your router, you may have to open the software to retrieve them. To retrieve your router User name and Password through Cisco Connect, go to Valet Settings > Advanced Settings.
Step 2:
Once you have the setup page open, check the upper right corner of the screen for the firmware version.
Downloading the firmware
Step 1:
Go to the Cisco HomeSupport page.
Step 2: In the Search Support box, enter the model number of your hotspot then press [Enter]. For instructions on
getting your hotspot’s model number, click here.
NOTE: In this example, we used the M10 Valet Hotspot.
Step 3: Once the page opens, click the Downloads tab.
Step 4:
Click the drop-down arrow and select the correct version of your hotspot. To learn how to check the hardware version, click here.
Step 5: Click Download under Firmware to download the latest firmware of your hotspot.
NOTE: If the current firmware version of your hotspot matches the one found online, upgrading is not
necessary. Step 6: Click Save in the File Download dialog box that appears, choose an accessible directory such as the Desktop and click Save. Once the download is complete, click Close, if prompted.
NOTE: Image may vary depending on the operating system of your computer.
If you're using a Mac computer, click Download in the dialogue box that appears. Once the download has
been completed, click the red button to close the window.
The name of the file may vary depending on the firmware file of your router.
Click Save
to save the
file.
Taking note of your current settings
After upgrading the hotspot’s firmware, a reset needs to be done which will require you to reconfigure your settings from scratch. Be sure to note down important settings before resetting the hotspot and use it as basis for reconfiguring the router later. NOTE: You can use the back-up and restore configuration feature of your hotspot before resetting so as not to go
through the whole process of reconfiguration. However, firmware upgrades sometimes include added functionalities which might mess up the settings once restored from a backup. In case this happens, you might have to manually reconfigure the hotspot. Performing the Upgrade
Step 1:
Access the hotspot’s web-based setup page. Step 2: Click the Administration tab.
Step 3: Click the Firmware Upgrade sub-tab then click the Browse button.
Step 4: Locate the firmware then click Open.
Step 5: Click the Start Upgrade button.
Step 6: Once the upgrade is complete, the following message will appear. Click on Continue.
Completing the firmware upgrade
Step 1: Close Internet Explorer or Safari.
Step 2: Press and hold the Reset button of your hotspot for 30 seconds.
Step 3: Powercycle the hotspot. To do this, unplug the power cord and wait 30 seconds before plugging it back in.
The firmware upgrade process is now complete.
DEALING WITH A ZIPPED FILE FORMAT
For older Linksys routers, the downloadable firmware format is usually in a zipped file form.
Checking the firmware version of your router
Step 1:
Access the router’s web-based setup page. To do this, launch a web browser such as Internet Explorer or
Safari. Enter your router’s IP Address on the address bar, then press [Enter]. When the login prompt
appears, enter your router’s User name and Password.
NOTE: The default IP Address of Linksys routers is “192.168.1.1”. To view instructions on how to check the IP address of your router, click here.
IMPORTANT: The default User name and Password is “admin”.
Step 2: On the router’s web-based setup page, check the upper right corner of the screen for the firmware version.
NOTE: The web-based setup page may look different depending on the model of your router.
Downloading the firmware
Step 1:
Go to the Cisco HomeSupport page.
Step 2:
In the Search Support box, enter the model number of your router then press [Enter]. For instructions on
getting your router’s model number, click here.
NOTE: In this example, we used the WRT54G.
Step 3:
Once the page opens, click the Downloads tab.
Step 4:
Click the drop-down arrow and select the correct version of your router. To learn how to check the hardware
version, click here.
Step 5:
Click Download under Firmware to download the latest firmware of your router.
NOTE: If the current firmware version of your router matches the one found online, upgrading is not
necessary.
Step 6:
Click Save in the File Download dialog box that appears, choose an accessible directory such as the
Desktop and click Save. Once the download is complete, click Close, if prompted.
NOTE: Image may vary depending on the operating system of your computer.
If you're using a Mac computer, click Download in the dialogue box that appears. Once the download has
been completed, click the red button to close the Downloads window.
The name of the file may vary depending on the firmware file of your router.
Step 7:
Double-click the .zip file and extract its contents to a single folder or to the Desktop. If you're using a Mac
computer, the file would be extracted automatically.
Taking note of your current settings
After upgrading the router’s firmware, a reset needs to be done which will require you to reconfigure your settings from scratch. Be sure to note down important settings before resetting the router and use it as basis for reconfiguring the router later. NOTE: You can use the back-up and restore configuration feature of your router before resetting so as not to go
through the whole process of reconfiguration. However, firmware upgrades sometimes include added functionalities which might mess up the settings once restored from a backup. In case this happens, you might have to manually reconfigure the router.
Performing the Upgrade
Step 1:
Access the router’s web-based setup page.
Step 2:
Click the Administration tab.
Step 3:
Click the Firmware Upgrade sub-tab then click the Browse button.
Step 4:
Locate the firmware then click Open.
Completing the firmware upgrade
Step 1: Close Internet Explorer or Safari.
Step 2: Press and hold the Reset button of your router for 10 seconds.
NOTE: If the image of your router is different from the one shown above, consult your router documentation
for the location of the reset button.
Step 3: Powercycle the router. To do this, unplug the power cord and wait 30 seconds before plugging it back in.
The firmware upgrade process is now complete.