1
27 BUSINESS PRESENTATIONS PRODUCTS/EQUIPMENT/MATERIALS www.roxar.com Roxar Flow Measurement AS Gamle Forusvei 17 P.O. Box 112 Forus 4065 Forus Norway Tel: +47 51 81 88 00 Fax: +47 51 81 88 01 [email protected] Roxar Flow Measurement AS Upstream Oil & Gas Instrumentation Roxar, a business unit of Emerson Process Management, is the industrial inventor of sand monitors, multiphase- and wet gas meters. The use of Roxar technology enables operators to make reservoir management and flow assurance decisions with the maximum amount of information. Emerson’s measurement and process control systems extend into upstream oil & gas production through the Roxar portfolio of real-time field instrumentation and its data acquisition software, Roxar Fieldwatch. It is Roxar Fieldwatch and its advanced data monitoring, visualisation and analysis tools that transform raw data into valuable decision making information and provide a seamless route from field instrument to desktop. From flow rates to temperature, pressure, sand erosion and corrosion, chemical injection and instrument retrieval, Roxar puts operators firmly in control of the production process, increasing oil & gas recovery and maximising reservoir performance. Subsea Monitoring and Instrumentation • Subsea multiphase and wet gas meters continuously measuring the flow rates of oil, water and gas in the well stream and helping wells operate at peak performance. • The first complete system for the replacement and installation of subsea instrumentation during production. • Chemical injection systems to optimise MEG performance and increase subsea control. Downhole Monitoring and Control • Intelligent network of permanent downhole monitoring systems, fully proven in high temperature reservoirs, and providing temperature, pressure and water cut information from any well location. • More than 1,000 successful installations worldwide - providing a complete downhole picture of the reservoir. Production Monitoring & Flow Assurance • Third generate topside multiphase meters with a new measurement principle and an even more detailed characterisation of flow dynamics. • Non-intrusive corrosion and sand erosion monitors, providing that crucial early warning system and guaranteeing flow assurance. Subsea Monitoring and Instrumentation. Production Monitoring & Flow Assurance. Downhole Monitoring and Control.
