17
Roxstar... The Roxstar is a stunner with meticulously machined rich accenting anodized components, capped off with Realtree APG limbs. The power supply for the Roxstar is Alpine’s V3g Cam, designed to produce the best overall performance for hunting. The cam design provides high velocities, smooth draw force profile, and a full 80% let off.Become a Roxstar and emerge on your stage of performance with confidence, knowing that you are shooting the most radical, blood spilling, hunting machine available.
Precision Modular Strut System...
The Roxstar is available in full camo with a film dipped riser and limbs, or a black anodized riser with camo dipped limbs.
Licensed under Patent #6,990,970B-1
Mixing it up....
Lance St Onge with a fine Idaho bull taken with his Roxstar. Lance is an accomplished bowhunter and long range rifleman that stacks the critters up every fall. He is also on our front cover this year with a nice Idaho antelope.
Josh Cluff, HS Precision Sales Manager, with a great Colorado bull that he and HS Precision President, Tom Houghton II, bugled in. Josh and Tom are avid bowhunters and precision long range riflemen as well.
Steve Stajkowski, owner of SJX Jet Boats Inc, with a batch of carp shot on the Snake River from one of his shallow water sleds.
Rockie Jacobson with a nice Idaho spring bear. Rockie is the owner of Rocky Mountain Hunting Calls and is a Roxstar fan.
Another picture of Rockie with an Idaho turkey he called in.
All of us at Alpine are bowhunting fanatics and have been all of our lives. This year we celebrate 27 years of designing and manufacturing some of the industry’s most innovative and proven products. We test and use these products in all kinds of weather and hunting conditions here in Idaho, long before they are shown in this catalog insuring you have a positive and enjoyable Alpine experience. Last year, we introduced firearm accessories into our Xtreme Hardcore Gear line. We did this because we all have that same love of rifles for competition and long range shooting that we have for archery. Idaho is long range rifle and tactical shooting country and we are immersed in this exciting segment of the shooting sports industry. If you are also a firearms enthusiast, as we are, we hope you will enjoy our new products in the Xtreme Hardcore Gear line.
The Verdict features a reflexed forged riser with our new “Limb Vice Pocket System”. This system clamps the limb and pocket assembly against the riser just like a vice to totally eliminate noise, vibration, and recoil. The new “Fast Lane Cable Guard System” is sleek, smooth, and trouble free. It drastically reduces recoil and noise to give this new performer an unbelievable feel when shooting. An “Integrated Offset Quiver Mount” is a standard feature on this bow that will allow almost any quiver to be mounted back and out of the way. This exclusive Alpine mount moves the quiver closer to the true centerline of the bow to aid in overall balance. Our “Pulse Isolator String Stop” is now fully adjustable and allows for fine tuning of centerline, as well as fore and aft movement. Alpine has also added a 416 stainless steel stabilizer insert to the Verdict for positive and long lasting thread engagement for the stabilizer.
Verdict...The final judgement has been passed..
Fireball...The 2014 Alpine F1 Fireball is the performance bow of your dreams…Built from a rock solid forged riser with power tuff composite limbs. The F1 Fireball is all the bow you will ever need to tag the trophy of a lifetime or bang away at the range. The power plant of this machine is the 3g Velocitec Cam. The Velocitec Cam System has been in the Alpine line for years and is tried and true in situations from the bitter northern Canadian cold to the sweltering African summer heat. The F1 Fireball is sure to exceed your expectations with its blazing speed, smooth draw cycle, and bone crushing kinetic energy. The best part about the F1 Fireball is the fact that it doesn’t hurt the pocketbook and costs about half of most other performance bows on the market.
New, redesigned limb pocket system for 2014 will provide years of solid, reliable, and trouble free shooting.
Available in Black or MO Infinity Camo
Dustin Bomley, Alpine productiion manager, with a nice Colorado bull. The Verdict was the bow of choice on this hunt.
Alex Martin with a well placed shot on this Montana whitetail. Alex used his Alpine Fireball.
Rookie Youth...
The Alpine Rookie is just what you need when starting out your aspiring young archery enthusiast. This little bow is built to handle the abuse of a kid and still perform flawlessly when your youngster hits the range. The Alpine Rookie has been designed to maximize its usage as your child grows, with a draw range of 19 to 25 inches and draw weight range from appx. 10 to 35 pounds. Alpine believes that champions are built from a young age, and the Alpine Rookie is a key part to bringing your kiddo to a level above the rest.
Available with a Black riser and the option of Pink or conventional Camo on the limbs.
Alpine Youth Bow Case...
The small Alpine soft bow case is specifically designed for the Alpine youth and bowfishing bows with a budget in mind.
Also available with a Pink Camo riser & black limbs for the gals.
The Alpine Ruckus is built for serious shooting. All machined components and a high performance Radial Force Cam get the teen or lady up and running with a great bow for hunting or target shooting.The hunting version is finished in Mossy Oak’s Break-Up Infinity Camo pattern, and the lady version is finished in stunning Pink Camo. Both bows are inlaid with a pewter finished medallion. Step up from your beginner bow into a great shooting performer from Alpine.
The Ruckus and Rookie are built using a machined aluminum G Series riser and pocket. The RF cams on this little bow are also machined from billet aircraft aluminum. No plastic on these babies. It’s top of the line all the way!
Age 10-Adult...
No shortcuts on the Ruckus and Rookie bows...
Ruckus...
The 2014 Alpine Mako is built with a CNC machined riser and a redesigned limb pocket system that is capped off with machined aluminum Radial Force Cams. There are no plastic components on this bad boy! The Radial Force Cam System features 7 inches of rotating draw length adjustment to fit almost any age of bowfisherman. The draw length can be adjusted without a bow press and can be done in the boat in seconds. The total mass weight of the Mako is right at 3 pounds so it will keep your complete set-up light weight for a full day of arrow flinging.
Be on top of the food chain when you enter the water with an Alpine Mako.
BowfishingMako...
The Alpine Frenzy is the perfect bow for a beginning archer or a budget minded bowhunter. The Frenzy features 7 inches of adjustable draw length from the Radial Force System and poundage up to 60 pounds. The Alpine Frenzy meets the needs for beginner hunters or even a more advanced archer looking to lighten things up.The light weight design and full draw length adjustability, without the use of a bow press, make the Alpine Frenzy the best choice for the person not wanting to break the bank.
Frenzy...
For the ladies!!! This HOT black ribbed boyfriend tank is 100% cotton, has a longer length, and is form fitting. Comes with Pink & White Alpine logo on the chest and “Fear the Force” across the lower back. Black. Junior Sizes: SM, MD, LG, XL, XXL.
This hooded sweatshirt is a 50/50 blend fleece. Double layer hood, drawstrings, and kangaroo pocket. Middle chest Alpine logo & “Team Alpine” down left sleeve. Black. Mens Sizes: SM, MD, LG, XL, and XXL.
Alpine short sleeve Mako tee with front Alpine logo, shark on right sleeve, and Mako graphic on back. Gray.Mens Sizes: SM, MD, LG, XL, and XXL.
Alpine long sleeve tee with front Alpine logo & “Team Alpine” down left sleeve, and bow graphic on back. Green. Mens Sizes: SM, MD, LG, XL, and XXL.
Alpine short sleeve bow tee with front Alpine logo, deer skull on right sleeve, and bow graphic on back. Blue.Mens Sizes: SM, MD, LG, XL, and XXL.
Clothing...
Alpine hats with embroidered logo. Available in Black, Sage, Brown, and Pink Camo. One size fits all.
Matt Kueffler and Teammate Brandon Shaw on the Snake River during the Idaho DU/IBA Tournament in Homedale, Idaho
Power Loc Ultralite Quiver...The new Power Loc™ 4 Arrow Quiver sports the best features of the legendary Soft Loc Quiver with the addition of some great new designs and improvements. Alpine continues to use a variation of the very effective rubber mount that isolates noise and vibration between the quiver guide rails and your bow. In fact, when the quiver is removed from the mount, all of the latching system comes off from
the bow and stays with the quiver so there is no chance of unwanted noise and vibration
from the quiver mount while the quiver is off the bow. The new Power Loc™ has an innovative roll and lock latch to prevent
accidental dis-mounting of the quiver while in heavy brush, dirt bike riding, or on horse back. As the latch is rolled into position it applies pressure to the
rubber guide rail module as the stainless steel latch pin locks into an indent in the 6061 aluminum mounting base.
Safe, secure, and vibration free.
Made in the USA
The rugged Power Loc™ mounting base is extruded and machined from 6061 aluminum. It features 2 horizontal mounting positions and 1 set of holes for rotating the quiver 15 degrees for additional clearance options when installing. This mount is all that remains on the bow when the quiver is removed, so there is nothing to rattle, vibrate, or make noise.
1. Load the rail gripper assembly into the mounting base, pressing the latch side in last.
2. The latch is now in the preloaded position. Simply rotate the lever down until it clicks into the indent on the aluminum base as shown below.
The Power Loc™ hood features a full urethane foam liner to protect both mechanical and standard broadheads. With the liner being the full depth of the ABS hood there is no chance of making noise when removing your arrow.The new Power Loc™ arrow gripper has been designed as a two stage gripper that will grip even the smallest arrow shafts.
Power Loc Quivers are available in these popular camo patterns..
• Mossy Oak Infinity • Realtree Xtra • Realtree APG HD • Mathews Lost Camo • Mathews Lost AT • Black
Pro Balance G1 Quiver Mounting System..
The Pro Balance G1 Quiver Mount is designed to accept almost any 1 piece quiver. Using this mount allows you to balance your bow with a quiver you already own. Adjustments include fore and aft movement, in 3 hole positions on the mounting bracket and infinite windage adjustment with the guide rail clamp. This mount works perfectly with our new Power Loc and SL2 quivers. Made in the USA
Alpine’s Quick Draw Hip Quiver System features a rugged full grain leather holster with a rotating mount and a quick detach rail gripper. This is a very unique hip quiver designed with the flexibility to adapt to brushy or open conditions in seconds. Simply purchase the Soft Loc of your choice (3, 5, or 7 arrow) and mount it to your bow. Then once you purchase the hip quiver, you are set and ready to go with a mount on your bow and on your hip. This allows you to switch back and forth from the bow to your hip in seconds. Will not work with the Power Loc or SL2 quivers.
Soft Loc Hip Quiver System...
The Tension Pin Set is for securing smaller diameter arrows. Each pin is molded in an oval shape and designed to increase arrow tension on the Alpine Soft Loc and Bear Claw arrow grippers. Simply slip a pin into the outbound hole in the lower gripper. Twist slightly, to increase or decrease tension. 7 pins included.
Secure your Soft Loc Quiver to any tree with a flip of the wrist and a simple twist. This unique Quiver Clip is a great way, pioneered by Alpine Archery, to securely attach your Soft Loc Quiver to the tree. The screw-in version of the quiver mount has a very sharp lag screw that tucks neatly into the body of the mount for transportation and storage. This compact feature allows you to pack the quiver mount in your pocket or any pouch of your hunting pack without injury or damage.
Soft Loc Screw-in Tree Mount...
New SL2 Quiver In 3 and 5 Arrow Versions...
SL2 Quivers are available in3 and 5 versions...
• Mossy Oak Infinity • Realtree Xtra • Realtree APG HD • Mathews Lost Camo • Mathews Lost AT • Black (5 arrow only)
SL2 Quivers are available in these popular camo patterns..
Since the introduction of the Soft Loc Quiver System back in 2001, it has become one of the most popular quivers of all time. The feature packed Soft Loc quickly became known as the quietest, mid-priced quiver available, and the dual guide rails have become an industry standard. After our introduction of the new Power Loc Quiver in 2014 and seeing the instant success of that quiver we decided to incorporate some of those features to improve and bring the Soft Loc up to date.
By upgrading the original Soft Loc with our super strong Power Loc Mounting System utilizing a smaller mount, lighter guide rails, and reduced mass weight we have made this legendary quiver system even better.This new quiver is now the SL2. The SL2 is available in 3 and 5 arrow versions and will accommodate 2, 3, and 4 blade broadheads in standard or mechanical configurations. We have also redesigned the arrow gripper to hold the new smaller size carbon arrows. Made in the USA
Soft Loc 7 Arrow Quiver...
Soft Loc Tension Pin Set...
The original Soft Loc Quiver. The 7 arrow Soft Loc will give the hunter wanting to pack a lot of arrows a quiet vibration free quiver. When mounted on a bow, this quiver actually reduces felt vibrations, therefore acting as a great and very practical vibration dampener. The 7 arrow remains the same as the original Soft Loc and is the choice for the hunter wanting a high capacity quiver.Made in the USA
The SL2 is shown with the quiver removed from the mount, all of the latching system comes off from the bow and stays with the quiver so there is no chance of unwanted noise and vibration from the quiver mount while the quiver is off the bow. The new SL2 with the Power Loc™ latch is the perfect setup when you need a 3 or 5 arrow quiver.
Bear Claw Quivers...
When your foam gets worn out, you should replace it. The Bear Claw Replacement Foam is cut from top quality ethafoam and will hold your arrows safely until you are ready for that next shot. Available for 3 and 5 arrow versions.
Always hunt safe!
Secure your Bear Claw Quiver to any tree with a flip of the wrist and a simple twist. This Quiver Clip is a unique way, pioneered by Alpine Archery, to securely attach your Bear Claw Quiver to the tree. This screw-in mount has a very sharp lag screw that tucks neatly into its body for transportation and storage.
Bear Claw Compact Screw-in Mount...
Works great with mechanical broadheads!
• Mossy Oak Infinity • Realtree Xtra • Realtree APG HD • Mathews Lost Camo • Mathews Lost AT • Black (5 arrow only)
Bear Claw Quivers are available in 3 & 5 arrow versions...
Cousin to the Soft Loc… The Alpine Bear Claw Quiver is a great, cost effective way to carry your arrows. The Bear Claw 3 and 5 arrow versions are designed to have more refined features than any other price point quiver available. The Bear Claw Quiver is a universal quiver system designed with the treestand hunter in mind. With the Bear Claw you have a lightweight, inexpensive quiver that easily detaches and will accept any common arrow size. The Bear Claw has a wide range of vertical adjustment, so you can move the quiver to avoid rest or sight conflicts and keep your nocks out of the mud. Conventional broadheads are no problem and the convenient pre-cut holes in the quiver foam allow you to use mechanical broadheads without the extra weight and expense of an additional arrow gripper. Made in the USA
Bear Claw Quiver, the ideal treestand quiver, in all of the hot camo patterns...
V-Twin Arrow Rests...
In 2006, Alpine introduced the Whisperflite Fall Away Arrow Rests and today the legacy continues to grow. Independent testing on over 15 different fall away rests awarded Alpine the #1 best pick in the “Best Bang For The Buck” category in a recent head to head comparison. This innovative rest is a “no bones about it” product… Alpine has achieved this by taking into account every possible feature… Built in arrow holder on the launcher, independent windage and vertical adjustment, universal mounting holes, buss cable or cable slide pull option, sealed ball bearings, black anodize and the list goes on… Made in the USA
Alpine’s Match Grade Whisperflite Rest is built using dual ball bearings with one bearing mounted into each side of the mounting bracket to assure absolute accuracy shot after shot for years of trouble free shooting.
Whisperflite Arrow Rest Affordable, innovative, rugged, and easy to set up...
There are more varieties of arrows and different cam systems than ever before. Sometimes certain combinations of the two can be a little more challenging to tune than the dealer or consumer wants. At times it is necessary to vary the pressure on one side of the arrow to compensate for a particular cam system or arrow combination. The V-Twin Arrow Rest from Xtreme Hardcore Gear™ has a great way of dealing with this issue. Independent adjustable spring tension on each fluoropolymer launcher allows for custom tuning of side and downward tension. Combine this with the rubber mounted top capture option and you get one of the most adjustable full capture rests on the market today. Billet machined aluminum body and fluoropolymer launchers make the V-Twin Arrow Rest extremely durable and quiet enough to harvest the wariest of big game. Made in the USA
The machined aluminum plunger housing holds the fluoropolymer plunger and a compression spring, with the spring tension controlled by the adjustment of the set screw. The plunger system is extremely forgiving and easy to tune. When paper tuning, for example, you would turn the screw in on the left plunger spring to increase tension and correct a slight left tear. Larger tears in the paper will be adjusted with normal windage and elevation adjustments to the rest body itself.
Your arrow is placed between the 3 fluoropolymer pins for absolute control. The 2 lower plungers are spring loaded and compress as the arrow is placed into capture mode. The upper pin is mounted in a rubber housing that will flex out of the way when placing the arrow in capture mode, or when the arrow is released during the shot. This top capture pin can also be removed if so desired for simple launcher style shooting without full capture.
Fluoropolymer has a very low coefficient of friction, so the arrow is quiet and smooth during the draw cycle.
MR Series Stabilizer, superior dampening, compact, and adjustable... Made in the USA
“Six Shooter Weight System” ...
• 3” Carbon fiber rod • Mass weight is 6 to 8 oz.
• Length is 5.5 inchesRest is available in RH
only
XHCG Stabilizers...
The Phantom XR is a great all around stabilizer. With an overall length of 4.5” and a weight of 6.5 ounces, you will have a stabilizer offering lots of recoil and vibration control in a compact package. Available in Carbon Fiber finish.
The Phantom XR7 has a custom wrapped carbon main tube with two adjustable dampening modules for added vibration and noise control. The flexible rubber body absorbs vibration like a sponge and the carbon film dipped head weight adds the right balance for the ultimate shooting experience. Weight 8.5 oz.Available in Carbon Fiber finish.
The Phantom ZR7 has all the features of the XR7, with the addition of the Mathews Harmonic Damper® installed in the head weight. Our custom wrapped carbon main tube is fitted with two adjustable dampening modules for added vibration and noise control. The flexible rubber body absorbs vibration like a sponge. Weight 9.5 oz. Available in Lost Camo, Lost AT, and Carbon Fiber finishes. *Mathews Dealer Exclusive Item*
The Phantom ZR is a great all around stabilizer. With an overall length of 4.5” and a weight of 7.5 ounces, you will have a stabilizer offering lots of recoil and vibration control in a compact package, with the addition of the exclusive Mathews Harmonic Damper®. Available in Lost Camo, Lost AT, and Carbon Fiber finishes. *Mathews Dealer Exclusive Item*
Bow Slings...
V-Loc Ultra Bow Sling
The Adjustable Stabilizer Mount is perfect for balancing your bow when you don’t use a bow sling. This mount can be mounted in the front stabilizer hole, or rear mounted, if your bow is tapped for a reverse stabilizer mount.
V-Loc Adjustable Stabilizer Mount...
V-Loc Mounts & Slings lock in place with a 6-32 screw that locates into the serrations around the bottom of the mount body.
Alpine’s Wind Tester is designed to eliminate fumbling for or even loosing your wind tester while stalking game and checking wind direction. By hooking it to your belt or pack, you always know where it is, plus it allows you to keep hand movement to a minimum and remain undetected by your quarry. It is assembled using a shock cord to give you additional reach away from your body to pick up subtle wind movements. Since the bottle hangs with the nozzle in the down position, your powder is always charged in the tip, and ready for action.MADE IN THE USA
Alpine Super Duster Wind Tester
This exploded view drawing shows the Mach 5 components as they are assembled into the slide.
Rope pull hole for fall away rests.
Streamlined composite body.
Rubber dampening sleeve isolates & reduces vibrations.
The fluoropolymer liner and rubber sleeve have a locator hole to keep them mated and aligned with the alignment post in the composite body.
The Mach 5 Cable Slide features a fluoropolymer slide surface, press fit into a rubber, vibration dampening sleeve, and capped off with a space age looking slide body that is fitted with a termination point for a fall away rest pull cord if desired. Alpine Archery has created this cable slide by combining fluoropolymer and rubber into a high-tech composite housing, making the Mach 5 the best cable slide available. Available in black, brown, camo, or carbon fiber dip/red.MADE IN THE USA
Alpine’s new Survival Bow Sling starts with a rugged machined aluminum mount that interfaces seamlessly to your favorite bow. Fitted with adjustable rubber straps that have durable clips laced on each side. The braided paracord survival strap can be secured in each clip to create a comfortable bow sling and give you the confidence that your bow will never fall to the ground during your shot sequence.The Alpine Archery Survival Bow Sling is available in a Brown/Black combo to match most hunting bows or a few different and trendy florescent colors. Orange/Black, Green/Black or Pink/Black.
New Survival Bow Sling...
Xtreme Hardcore Gear™ has designed the V-Loc Ultra Sling System™ which allows the stabilizer and its weight to be custom positioned to offset the weight of added accessories. No one says the stabilizer has to be down the center. Why not balance your bow the way you want it to be? Made with billet machined components and a rugged positioning lock, the V-Loc is sure to be as durable as it is reliable. The V-Loc System™ is available in the Ultra Bow Sling or the Adjustable Stablizer Mount. Don’t compromise the performance and balance of your bow any longer. Pick one up at your local dealer today.
Xtreme Hardcore Gear Firearms Products...
Top accuracy requires a level gun. Even a slight canting of your rifle will cause windage errors. The TRU Level Pic Rail features a precision level housed in the CNC machined picatinny base. This mounting system protects the level from being bumped out of plumb during hard use. The unique location also keeps your level and scope eye piece in the same sight picture, allowing you to check the level when aiming, without raising your head from the shooting position. If you are serious about rimfire shooting and varminting, you need a TRU Level Picatinny Mount on your tricked out Ruger® 10/22®.Available in Black Anodize MADE IN THE USA
TRU Level™ Picatinny Mount for the legendary Ruger® 10/22®...
10/22® TRU Level™ Picatinny Mount Specifications:Material: Source USA Mills 6061 T-6 AluminumFinish: Black Anodize Mill Spec 8625 Type 3 HardcoatMounting Screws: (4) Source USA 6-48 Torx #15 .295” long @15 Inch Pounds.Picatinny Configuration: (14), MIL-STD 1913 Picatinny Cross Slots.
Caliber Specific Reloading Funnels from CNC machined aluminum barstock...
The new, Caliber Specific Powder Funnels are machined from solid aluminum bar stock on our CNC turning centers. These precision funnels are meticulously machined to exacting tolerances and then polished for a perfectly smooth ID finish. This allows the powder to flow smoothly into the case mouth. The funnels are color coded with a bright dip anodized finish and then laser engraved with the caliber on the funnel base for easy identification on your reloading bench. These funnels are anti-static with all powders, and a machined funnel has a nice weight and feel. They are a real pleasure to use! MADE IN THE USA
Available in the following calibers:. .375, .338, .308, .284, .277, .264, .257, .244, .224, .204, .177
The cut away at left shows the smooth unrestricted passage into the case mouth. The shoulder of the case fits into a counter bore that is the average neck diameter of a case neck OD. of that caliber. This configuration allows even the finest powders to flow into the case without hanging up on the edge of the case mouth.
Caliber specific means the funnel ID. and the inside of the case neck are the same diameter, This allows the powder transfer from funnel to case smoothly.No more tapping the funnel everytime you pour powder to get it to flow into the case!
Our Funnel Rack is designed to keep your reloading funnels out of the way, but easy to grab when you need it. Picking the right funnel is always a snap thanks to our laser engraved caliber identifier on the funnel base and caliber specific color coding. The rack is clear anodized machined aluminum and the funnel pockets have a black felt bottom to protect the funnel finish. MADE IN THE USA
XHCG products are designed and manufactured in Lewiston, Idaho USA
XHCG Tru Level Picatinny Mounts...
• Precision level mounted into a CNC machined picatinny base for perfect level to base alignment.• Constant level verification when in head down shooting position.• MIL-STD 1913 Picatinny Cross Slots.• Billet machined 7075 T-6 Aluminum. Source USA Mills• Black Anodize Mill Spec 8625 Type 3 Hardcoat• Mounting Screws: (4) 6-48 Torx .225 Head dia. @ 22 Inch Pounds. Source USA
TRU Level™ Pic Rail Centerfire Rifles...
Gun Model Action type MOA spec Recoil lugRemington 700 Long action 0 MOA YES
Short action 0 MOA YESLong action 20 MOA YESShort action 20 MOA YES
Winchester Model 70 after pre 64 actions Built with 3 screw holes in the rear to fit both Long and Magnum actions.
Long / Magnum action 20 MOA YES
Savage Mod 110, 111, 112,114, and 116 No recoil lug to accommodate all round top actions with top or side ejection port.
Long action 0 MOA NO
Long action 20 MOA NOSavage Mod 10, 11, 12, 14 and 16 No recoil lug to accommodate all round top actions with top or side ejection port.
Short action 0 MOA NO
Short action 20 MOA NO
Long range shooting requires a level gun, as any tilt in the gun translates into a serious windage error at longer ranges. When using the TRU Level™ Scope Base, your level and scope eye piece are in the same sight picture. This allows you to check the level while aiming without having to raise your head from the shooting position. With the level housed in the machined picatinny base, it is protected from being bumped out of level as often happens with some scope level systems. If you are serious about long range shooting, you need a TRU Level™ Picatinny Mount. MADE IN THE USA
Black OPS AR Tactical Scope Ringswith Integrated Level...
Specifications: AR Precision Scope Rings with Integrated Tactical Level
Ring Bore Diameter Options: 25mm bore Tol. +/-.00130mm bore Tol. +/-.001
Material: Source USA Mills Billet 7075 T-6 Aircraft AluminumFinish Anodize: Black Anodize Mill Spec 8625 Type 3 HardcoatRing Height 30mm: Top of pic mount to bore center 1.500” high and are matched within .002Ring Height 25mm Top of pic mount to bore center 1.500” high and are matched within .002Cap Screws: (6) Source USA 8-40 #15 Torx @ 20 Inch PoundsClamp Screws: (2) Source USA 10-24 SHC Grade 8Clamp guide Rails: (2) Source USA .125 Precision dowel pins
The new Black OPS AR Tactical Scope Rings are the AR version of our Force Recon Rings. They feature a built in level for correcting weapon cant on longer shots when varminting or competing with an AR platform rifle. Since the rings are the standard 1.500” high for AR rifles, you have great line of sight to the level when in the shooting position. This allowed us to move the level housing portion of the rings inboard so it would be inside the charging handle envelope, making the level tight and snag free when using a single point sling or weapons pack system . The rings are machined from .875 thick 7075 T-6 aluminum and have twin cross slot clamping bolts and clamp guide rails. This mounting system is very robust and assures the rings stay put in any conditions you might encounter from competition to combat.The rings are built for 25 and 30mm tubes with a bead blast finish and type 3 black hardcoat anodize. MADE IN THE USA
AR Platform Rings...
XHCG Force Recon Tactical Long Range Rings...
The Force Recon Tactical Rings feature a built in level housed into the lower portion of the rear scope ring. Having the level in the base of the ring assures that it is always perfectly parallel to the top of the picatinny rail which is essential for long range shooting. A perfectly plumb scope and rifle are essential for the bullet to follow a true vertical line throughout the projectile's path to the target.These precision, long range rings offer precise mounting for your optics onto the picatinny base and will not allow the scope to move under any recoil scenario. Our wide .875 mounting platform offers a stable interface with the pic rail while the 2 cross slot bolts provide awesome clamping power. We go one step further by installing a pair of stainless steel guide rails that press into the ring base. The ring base clamp rides on these rails to keep the clamp perfectly aligned as the 2 cross slot bolts are drawn tight against the pic mount. MADE IN THE USA
Specifications: Force Recon Precision Tactical Scope Rings
Ring Bore Diameter options: 30mm bore Tol. +/-.00134mm bore Tol. +/-.001
Material: Source USA Mills Billet 7075 T-6 Aircraft AluminumFinish Anodize: Black Anodize Mill Spec 8625 Type 3 HardcoatRing Height 30mm Medium: Top of pic mount to bore center 1.000” high and are matched within .002”Ring Height 30mm Medium: Top of pic mount to bottom of the scope bore .406” high and are matched within .002”Ring Height 30mm Low: Top of pic mount to bore center .850” high and are matched within .002”Ring Height 30mm Low: Top of pic mount to bottom of the scope bore .260” high and are matched within .002”Ring Height 34mm: Top of pic mount to bore center .900” high and are matched within .002”Ring Height 34mm: Top of pic mount to bottom of the scope bore .235” high and are matched within .002”Cap Screws: (6) Source USA 8-40 #15 Torx @ 20 Inch PoundsClamp Screws: (2) Source USA 10-24 SHC Grade 8Clamp guide Rails: (2) Source USA .125 Precision dowel pins
These precision, Long Range Rings offer precise mounting for your optics onto the picatinny base and will not allow the scope to move under any recoil scenario. Our wide .875 mounting platform offers a stable interface with the pic rail while the 2 cross slot bolts provide awesome clamping power. We go one step further by installing a pair of stainless steel guide rails that press into the ring base. The ring base clamp rides on these rails to keep the clamp perfectly aligned as the 2 cross slot bolts are drawn tight against the pic mount. MADE IN THE USA
Ranger Tactical Long Range Rings...
Specifications: Ranger Precision Tactical Scope Rings
Ring Bore Diameter options: 30mm bore Tol. +/-.00134mm bore Tol. +/-.001
Material: Source USA Mills Billet 7075 T-6 Aircraft AluminumFinish Anodize: Black Anodize Mill Spec 8625 Type 3 HardcoatRing Height 30mm Medium: Top of pic mount to bore center 1.000” high and are matched within .002”Ring Height 30mm Medium: Top of pic mount to bottom of the scope bore .406” high and are matched within .002”Ring Height 30mm Low: Top of pic mount to bore center .850” high and are matched within .002”Ring Height 30mm Low: Top of pic mount to bottom of the scope bore .260” high and are matched within .002”Ring Height 34mm: Top of pic mount to bore center .900” high and are matched within .002”Ring Height 34mm: Top of pic mount to bottom of the scope bore .235” high and are matched within .002”Cap Screws: (6) Source USA 8-40 #15 Torx @ 20 Inch PoundsClamp Screws: (2) Source USA 10-24 SHC Grade 8Clamp guide Rails: (2) Source USA .125 Precision dowel pins
XHCG Muzzle Brakes...
Gunsmith Installed Muzzle Brake Blank Specifications416 Stainless Steel
1.00 diameter 5/8”-24 thread 2.00” overall length
PART # HC-91110
.875 diameter 9/16”-28 thread
2.00” overall length
PART # HC-91111
.750 diameter 1/2”-28 thread 2.00” overall length
PART # HC-91112
4140 Carbon Steel
1.00 diameter 5/8”-24 thread 2.00” overall length
PART # HC-91115
.875 diameter 9/16”-28 thread
2.00” overall length
PART # HC-91116
.750 diameter 1/2”-28 thread 2.00” overall length
PART # HC-91117
Our radial ported brakes are very effective. If your shooting from a bench, or hunting this is a great brake, it is short, light, and economical. We make them as blanks for gunsmiths, or advanced do it your selfers in 416 stainless steel and 4140 carbon steel. The brakes are precision machined on our CNC turning centers, and although we call this a blank, we do most of the work for you. They are threaded and counter-bored for the barrel thread and shoulder. The 30 ported holes are .191 diameter and chamfered to save you time. We have drilled a .250 dia. pilot hole through the brake, and you must finish bore that hole to accommodate the caliber of the gun build plus at least +.020 overbore clearance. These brakes should be professionally installed to make sure the correct bore size is used in the gun build. MADE IN THE USA
These brakes are designed to be installed on 223/5.56 cal. AR15 rifles with .750 barrels. This brake will reduce recoil and muzzle jump significantly and improve your time on target with follow up shots and double tap drills. MADE IN THE USA
Specifications:• Thread: 1/2-28 Class 2 • Material: 4140 Carbon Steel• Finish: Black Oxide • 30 .191 dia. holes in 360 degree pattern
AR Muzzle Brake...
Our new Slotted Hybrid Brake is designed to drastically reduce recoil with aggressive slotting and internal bore stepping.The top and angular round hole porting reduces muzzle jump so you can better see your bullet impact. This porting does not go all the way around the brake body, only the upper 180 degrees, thus reducing dust blasting on proned out shooting, and concussion on bench shooting.
All brakes made with 1.000” od 416 stainless steel.
Note: Must be gunsmith installed for timing to the barrel and boring to correct caliber +.020 over.Material is allowed for final light turning, tapering to blend to barrel diameter at the rear and bead blasting if desired. MADE IN THE USA
Slotted Hybrid Muzzle Brake...
Slotted Hybrid Muzzle Brake Specifications416 Stainless Steel 1.00 diameter 1/2”-28 thread 2.600” overall length PART # HC-91120416 Stainless Steel 1.00 diameter 9/16”-28 thread 2.600” overall length PART # HC-91121416 Stainless Steel 1.00 diameter 5/8”-24 thread 2.600” overall length PART # HC-91122
The cut away above shows the brake cross section. The first radial chamber with angular holes combined with the holes at the top of the brake direct gasses upward to reduce muzzle jump (1).
The two side holes at the first radial chamber help to disperse felt concussion from the large volume of gasses striking the front of each of the slotted baffles (2).
The three slots (baffles) are separated by a series of larger than finish bore diameter holes to help distribute gasses to each of the slotted baffles more efficiently, thus improving the forward motion of the rifle to reduce felt recoil (3).
2.
1.
3.
Radial Ported Muzzle Brakes...
• Leaves no sticky residue when removed and it only sticks to itself.• Ideal for covering all rifles, shotguns, and spotting scopes, etc.• Great camouflage concealment and noise dampening.• Reusable and improves grip.• Material: Similar to soft athletic wrap. • Adjusts to variable contours like rifle scopes and stocks.
The Tactical camo wrap is ideal for covering rifles and spotting scopes. Same type material and concept as athletic wrap, it only sticks to itself and leaves no residue on the weapon when removed. Soft, flexible and quiet, and you can change the camo pattern in minutes to suit the environment you will be hunting in. Available in the following colors:Digital Sage, Digital Desert, Woodland and (digital Woodland not shown)
The “Tank” is CNC machined from solid steel to give it the weight necessary for no-hassle crosshair leveling. First, your rifle's action must be level. Then to level the crosshair in your scope to the leveled action, place the “Tank” on top of your elevation turret with the scope ring caps loosely in place. Then rotate your scope until the bubble lines up between the lines in the tank and you are now plumb to the rifle. Finally, tighten the scope ring cap screws evenly until tight and you are ready to hit the range. Bright Zinc plated finish. MADE IN THE USA
The “Tank” Crosshair Leveling Device...Scope & Action Leveling...
This no frills, precision action level is machined from solid steel bar stock. Just lay the flat portion of the level into the lugways on a bolt action rifle, then adjust the rifle until the bubble centers in the level sight window. After leveling the action you can use the “Tank” to plumb the scope crosshairs for a perfectly leveled shooting setup. Bright Zinc plated finish. MADE IN THE USA
CNC Machined Steel Action Level...
Specifications:• Constant level verification when in heads up, or down shooting position.• CNC machined 6061 T-6 aluminum. Source USA Mills• Black Anodize Mill Spec 8625 Type 3 Hardcoat.• Fits all AR15 rifles with MIL-STD 1913 Picatinny Cross Slots.• Side cut at the rear for ample hand clearance when operating the charging handle.• The Height of the level body from the top of the pic rail to top of level is .375”
The AR Tactical Level offers the mid to long range AR shooter an anti-cant device that is compact and mounts completely out of the way. The sides are sculpted so you can easily reach the charging handle with no chance of snagging the level mount. No more worries about tearing off or bumping a level that protrudes from the side of the pic rail. The TRU Level is always in your sight picture while shooting, so no more lifting your head to check the cant of your rifle while executing a shot. MADE IN THE USA
AR Platform Tactical Level...
Plenty of clearance on either side of the charging handle, as the side of the level housing is relieved to allow flawless cycling of the handle, even with a gloved hand.
In normal shooting position you can see your crosshairs and the level in the same field of view.
Tactical Camo Wrap...
Visit these other fine Alpine companies
xtremehardcoregear.com208-746-7065
lilmacmolds.com208-743-3858
www.alpinearchery.com Business hours: Monday through Friday 8 AM to 4:30 PM (Pacific Time)Catalog requests and email address: [email protected] Archery is licensed under one or more of the following U.S. patents. #4,241,715 #5,368,006 #5,809,982 #4,748,962 #5,020,507 #6,990,970
Alpine ArcheryPO Box 3193101 North South HighwayLewiston, ID 83501208-746-4717
BOW MODEL Rating Length Weight Height
Axle
Axle Weight
Pattern Style Material Length Length
Mat. off
NOTE: Draw lengths, brace heights, and axle to axle lengths are approximate due to soft harness systems.
Bow Specifications...
All yokes are 15.25” long
