R&S®AVHE100 UHD/4k Encoding and Multiplexing Solution · PDF fileSignal flow within the...

Platzhalter

Broa

dcas

t & M

edia

Prod

uct B

roch

ure

| 01.

00

R&S®AVHE100 UHD/4KEncoding and Multiplexing SolutionMore than just resolution

AVHE100_UHD_bro_3607-3697-12_v0100.indd 1 24.05.2016 09:04:23

System view displayed on the R&S®AVHE100 UHD/4K GUI.

2

The R&S®AVHE100 is a highly integrated, modular system that provides the entire functionality of an encoding and multiplexing solution in an extremely compact size. It com-bines sophisticated developments from Rohde & Schwarz with state-of-the-art IT technologies. The R&S®AVHE100 is a software-based solution built on a commercial off-the-shelf (COTS) platform. It uses hardware modules to inter-face with the traditional broadcast chain.

The R&S®AVHE100 can be flexibly configured for a wide range of applications. Signal flow within the encoding and multiplexing solution is fully IP-based. The R&S®AVHE100 has an intuitive, easy-to-use headend management system (HMS) that lets users control and monitor the entire work-flow via a single GUI.

The R&S®AVHE100 takes a unique approach to headend architecture, combining best-in-class software modules with highly reliable and compact hardware solutions to provide the industry’s first all-IP broadcast encoding and multiplexing solution.

Key facts ❙ UHD HEVC encoder ❙ Multi-codec platform ❙ Support of HDR ❙ Hybrid redundancy ❙ Automated, seamless software updating

The fully integrated and highly compact R&S®AVHE100 encoding and multiplexing solution minimizes complexity for terrestrial and satellite DVB headend systems. The innovative R&S®CrossFlowIP technology enables optimum utilization of all system components to deliver maximum availability. It provides significantly enhanced redundancy solutions compared with conventional systems.

R&S®AVHE100 UHD/4K Encoding and Multiplexing SolutionAt a glance


Core components of the R&S®AVHE100 providing full encoding and multiplexing functionality

IP

IP

IP

IP

IP

IP SNMP Seamless switch

¸CrossFlowIP input ¸CrossFlowIP output

Headend management system

PSI/SI signaling generator DVB CSA scrambler

Statistical multiplex manager DVB (re)multiplexer

A/V decoder A/V encoder

T2-MI gateway SFN adapter Network adapterASI

ASI

ASI

SDI

¸AVG050

¸AVG100

¸AVG050

¸AVG100 ¸AVS100 audio/video processing platform

ASI

3G-SDI/HD-SDI/SDI

Rohde & Schwarz R&S®AVHE100 UHD/4K Encoding and Multiplexing Solution 3

R&S®AVHE100 UHD/4K Encoding and Multiplexing SolutionBenefits and key features

All in one – integrated encoding and multiplexing solution ❙ Support of video signals up to ultra high definition (UHD) ❙ Multi-codec support, including the new HEVC standard ❙ Decoding of MPEG-2 and H.264 video signals, and MPEG-1, Dolby E™, Dolby Digital™, Dolby Digital Plus™ and Dolby® Pulse (high-efficiency AAC) audio signals

❙ Built-in automation capability ❙ Support of high dynamic range (HDR) technique ▷ page 4

IP-based, powerful system solution ❙ Hybrid redundancy solution ❙ Statistical multiplex function ❙ Full functionality and flexibility, with only a few hardware components

❙ R&S®AVS100 audio/video processing platform ❙ Easy installation and upgrades, low operating cost ▷ page 8

Innovative R&S®CrossFlowIP technology ❙ Seamless input signal switching ❙ Built-in frame synchronizer and format converter ❙ Seamless output signal switching ❙ Automated, seamless software updating ▷ page 10

Dolby® is a registered trademark of Dolby Laboratories.


UHD/4k

HD

720p

SD

Pixel resolution of current and coming video formats.

4

Support of video signals up to ultra high definition (UHD)The R&S®AVHE100 supports the UHD format, which at 3840 × 2160 pixel delivers four times more pixels than an HD signal at 1920 × 1080 pixel. The input signals are 4 × 3G-SDI signals, each containing one quadrant with a FullHD signal (1920 × 1080 pixel) in progressive scan format. This means that the R&S®AVHE100 can accept and process uncompressed video data at approx. 12 Gbit/s per UHD service. The R&S®AVHE100 automatically combines the signals for the individual quadrants into a UHD picture and then encodes them.

Multi-codec support, including the new HEVC standardThe R&S®AVHE100 is a software-based encoding and mul-tiplexing solution, making it possible to adapt to market demands and customer needs quickly and flexibly. The R&S®AVHE100 can encode all received video signals with the new high efficiency video codec (HEVC) to achieve the best video quality at the lowest data rate. HEVC is specifi-cally used with ultra high definition (UHD) transmissions, as it accomplishes reduction of video data in the most effi-cient way. It is also finding increasing use with high defini-tion (HD) transmissions in terrestrial networks (DVB-T2).

All in one – integrated encoding and multiplexing solution



Decoding of MPEG-2 and H.264 video signals,and MPEG-1, Dolby E™, Dolby Digital™, Dolby Digital Plus™ and Dolby® Pulse (high-efficiency AAC) audio signalsThe R&S®AVHE100 decodes precompressed video and audio signals, which are delivered as transport streams over IP, or as ASI or DVB-S/DVB-S2 transport streams. The decoded video and audio signals are taken to the respec-tive encoders, where their data rates are changed (trans-coding) and their resolution is adapted (scaling) to deliver the desired output format. Precompressed A/V signals can also be routed on unchanged (remultiplexing).

Integrated decoder function for compressed A/V input signals

Video decoder

Audio decoder

Video encoder

Audio encoder MultiplexerOutputInput

Audio/video/data

UHD version of the R&S®AVHE100, with

two R&S®AVS audio/video processing units.


Color space defined by Rec. 2020

D65

0.80.80.80.80.80.8 0.8 0.80.8

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

y

x

380

500

520

540

700

620

600

580

560

490

480

470460

GUI of R&S®AVHE100 headend management system with automation function.

6

Built-in automation capabilityThe R&S®AVHE100 comes with an integrated headend management system (HMS). Using the automation func-tion, the HMS can automatically perform reconfigura-tions. These can be launched at specific times by means of a scheduler or by an external trigger (e.g. SNMP, GPI). The intuitive, web-based GUI with its drag & drop func-tion makes it easy to modify reconfiguration sequences. This allows easy regionalization of the generated multiplex without external management solutions. In addition, the R&S®AVHE100 offers numerous display options (e.g. list/month/week view), where the start time for a selected event can be changed interactively. Events can also be completely cancelled.



Support of high dynamic range (HDR) techniqueThe R&S®AVHE100 permits the transmission of HDR-spe-cific metadata in a transport stream. This makes it possible to encode and transmit an SDI signal containing an HDR signal. An HDR-ready device displays images with a larger color space and an increased dynamic range of luminosity. Viewers see even more details, especially in bright or dark picture areas. The resulting picture is even more true to life and spectacular.

Rec. 601/709 (left) vs. Rec. 2020 (right)


Hybrid redundancy shown for a UHD system (example)

¸AVS100

4 × 3G-SDI UHD Main feed, service 1

4 × 3G-SDI UHD Main feed, service 2

Main UHD service 1(encoder, signaling generator, multiplexer, network adapter)

Main multiplex output

Mai

n

¸AVS100

Main UHD service 2(encoder)

Alternate multiplex output

Alte

rnat

e

Feeding main MUX

Alternate UHD service 1(encoder, signaling generator, multiplexer, network adapter)(hot standby)/service 2 (cold standby)

2 × 10 Gbit Ethernet

Feeding alternate MUX

4 × 3G-SDI UHD Alternate feed, service 1

4 × 3G-SDI UHD Alternate feed, service 2

8

UHD version of the

R&S®AVHE100 – rear view.

IP-based, powerful system solution

Hybrid redundancy solutionThe R&S®AVHE100 offers all essential functions of an encoding and multiplexing solution. On the R&S®AVS100 audio/video processing platform, multiple services are decoded and encoded in parallel, multiplexed, and adapted to the broadcast medium by means of transmis-sion specific network adapters. The hybrid redundancy concept makes it possible to implement an optimal N+1 device redundancy and thus an N+M encoder redun-dancy, with a 1+1 multiplexer redundancy at the same time. In combination with the R&S®CrossFlowIP tech-nology, this enables seamless main/alternate device switchover, i.e. switchover without any interruption of the generated transport stream. N+1 device redundancy additionally offers the advantage that one of the servers can be configured in 1+1 hot standby. As a result, the (high-priority) services encoded on that server also run in 1+1 hot standby and continue to be transmitted without interruption when switchover to the other server is made.


Statistical multiplex

Service 7

Service 6

Service 5

Service 4

Service 3

Service 2

Service 1

Time

Datarate


Statistical multiplex functionThe optional statistical multiplex (StatMux) function ana-lyzes the video complexity of the A/V streams to be multi-plexed and, based on the results, allocates appropriate bit rates to the encoders in a statistical multiplex pool. This ef-ficient utilization of data rates makes it possible to achieve higher picture quality for the transmitted programs or to transmit more programs at a time (enhanced efficiency). Programs can be prioritized within a pool. Higher-priority programs are allocated higher data rates to achieve higher quality for complex video sequences. The R&S®AVHE100 also supports a mixture of different codecs (MPEG-2, MPEG-4/H.264, HEVC) and formats (SD, HD).

Full functionality and flexibility, with only a few hardware componentsThe R&S®AVHE100 is a state-of-the-art encoding and multi plexing solution based on a high-quality IT processing platform that can be extended with an audio/video gate-way from Rohde & Schwarz. All R&S®AVHE100 functions are software-based, allowing quick and easy adaptation to modifications or expansions of the coding or transmission standards. In its UHD version, the R&S®AVHE100 com-prises only two R&S®AVS100 audio/video processing plat-forms. The R&S®AVS100 base unit provides all core func-tions, which are enabled via option keys.

R&S®AVS100 audio/video processing platformThe R&S®AVS100 audio/video processing platform is the core component of the R&S®AVHE100 encoding and mul-tiplexing solution. Its integrated headend management system allows users to centrally configure, control and monitor the R&S®AVHE100.Core functions of the R&S®AVS100 include: ❙ Decoding of MPEG-4/H.264 and MPEG-2 video signals in SD and HD format

❙ Encoding in line with HEVC, MPEG-4/H.264 and MPEG-2 in SD, HD and UHD format

❙ Statistical multiplexing of encoded video streams (SD, HD; MPEG-2, MPEG-4/H.264, HEVC)

❙ Multiplexing of DVB transport streams ❙ Insertion of signaling information (program specific information (PSI))

❙ DVB-S, DVB-S2, DVB-T, DVB-T2 signaling generation (service information (SI))

❙ DVB-T SFN adapter ❙ DVB-T2 gateway with single or multiple physical layer pipes (SPLP/MPLP)

❙ Headend management system (HMS)

Easy installation and upgrades, low operating costThe signal flow for the various input signals such as ASI, SDI, AES or the 10 MHz reference clock is fully IP-based throughout the R&S®AVHE100 system. The R&S®AVHE100 uses robust standard components and Ethernet cabling, which simplifies installation and maintenance. Since the core functions of the R&S®AVHE100 are software-based, system upgrades and modifications can in many cases be implemented by acquiring additional option keys – without any hardware extensions. For example, DVB-T can be up-graded to DVB-T2 with a simple option key. The integration of extensive functionality into a powerful IT processing platform also means lower power consumption. This re-sults in lower dissipated heat, which further reduces oper-ating costs, such as for air-conditioning. With its high level of integration, the R&S®AVHE100 saves valuable space in the equipment room, cutting down on infrastructure costs.


Frame synchronizer

Conv

entio

nal

¸AV

HE1

00

SDI inputs Crossbar EncoderFramesynchronizer

SDI inputs ¸®AVS100¸AVG100 or input board

MultiplexerEncoderInput interfaceMain SDI signal M

ain

MultiplexerEncoderInput interfaceAlternate SDI signal Alternate

¸AVS100

¸AVS100

IP

R&S®CrossFlowIP input signal switchover

10

Innovative R&S®CrossFlowIP technologySeamless input signal switchingOn the input side, the R&S®CrossFlowIP technology allows the input signals from the main system to be used in the alternate system and vice versa. Signals are routed between the main and the alternate system via IP, making any external components such as SDI switchers or man-agement systems unnecessary. The R&S®AVHE100 auto-matically detects faulty input signals and switches seam-lessly to the alternate signal. As a result, no switching operation becomes necessary in the downstream process-ing chain, and the transmit signal continues undisturbed. Unlike traditional redundancy concepts, the R&S®AVHE100 switches to the input signal alternate system automati-cally. This reduces system complexity and significantly decreases integration effort during commissioning.

Built-in frame synchronizer and format converterThe R&S®AVHE100 includes a software-based frame syn-chronizer that auto matically matches up the video signals, allowing a clean switchover at the frame level. Using the R&S®CrossFlowIP technology, the signals are distributed to the various R&S®AVS100 devices fully over IP. This elimi-nates the need for external frame synchronizers and SDI switchers required in conventional systems, substantially reducing system complexity and cost.

The R&S®AVHE100 allows users to convert input signal formats to configurable target formats. Video signals can be converted from interlaced to progressive format ( de-interlacing, e.g. from 1080i to 1080p), and the pic-ture resolution can be changed (scaling, e.g. from 720p to 1080p). External format converters – which intro-duce additional errors during signal feed, substantially add to costs and represent a single point of failure – are eliminated.


R&S®CrossFlowIP with ASI-based signal feed to downstream modulator

Input B

Mai

nAl

tern

ate

Input A

Modulator

Input B

Input A

Modulator

Input B

IP ¸AVG-B102

¸AVG100

¸AVG-B102

¸AVG100

ASI

MultiplexerNetworkadapter

¸AVS100

IP


¸AVS100

Output sync

Buffer

Buffer

Seamless switch

Buffer

Buffer

Seamless switch

R&S®CrossFlowIP with IP-based signal feed to downstream modulator

Input BMultiplexer

Networkadapter

Mai

n

¸AVS100

IP


Alte

rnat

e

¸AVS100

Input A

Modulator

Input B

Input A

Modulator

Input B

Output sync

Buffer

Buffer

Seamless switch

Buffer

Buffer

Seamless switch

IP


Seamless output signal switchingOn the output side, the R&S®CrossFlowIP technology permits seamless switching between the main and the alternate system. The seamless switching functionality implemented in the R&S®AVHE100 also provides synchro-nization of the main and the alternate path. In conven-tional systems, this functionality is provided by an external device, increasing system complexity and requiring inte-gration into a higher-level management system. The use of the R&S®CrossFlowIP technology, on the other hand, ensures that the main and alternate transport streams ap-plied to the modulator via IP (SMPTE 2022-1/-2) or ASI are always bit and time synchronous, so that the modulator can switch between these signals seamlessly without in-terrupting transmission. This is a vital prerequisite espe-cially for terrestrial transmitter systems configured as sin-gle-frequency networks (SFN) because, if the modulation for these transmitters is not time synchronous, the signal will be disrupted and resynchronizing all transmitters will cause an outage of several minutes.

Automated, seamless software updatingThe R&S®AVHE100 has an integrated update function that makes it possible to perform automated, incremental soft-ware updates on all devices in the system without inter-rupting transmission. In an N+1 system, software updates installed on the various devices (including encoders, multi-plexers, network adapters) are transferred to the alternate devices in an intelligent, step-by-step process during live transmission. The entire process is centrally controlled and monitored via the HMS. The R&S®CrossFlowIP technology and the fully IP-based signal routing ensure that no service is interrupted and that the transport streams are generated seamlessly. The overall process can be performed in sev-eral substeps; the operator retains complete control of the update.


12

Specifications in briefSpecifications in briefSD video encoder

Frame rate

Interlaced H.265 1) 60 fields/s, 59.94 fields/s, 50 fields/s

Progressive H.265 60 frames/s, 59.94 frames/s, 50 frames/s

Frame size

Interlaced H.265 horizontal (in pixels) × vertical (in pixels) (field rate in fields/s)

720 × 576 (50), 704 × 480 (60, 59.94), 640 × 480 (60, 59.94), 544 × 576 (50), 480 × 576 (50), 352 × 576 (50)

Progressive H.265 horizontal (in pixels) × vertical (in pixels) (frame rate in frames/s)

960 × 540 (60, 59.94, 50)

Aspect ratio

Wide 16:9

Normal 4:3

Switchover automatic, seamless switching between wide and normal

Video encoding format

H.265 main profile up to level 3.1 8 bit with 4:2:0 chroma subsampling

main10 profile up to level 3.1 10 bit with 4:2:0 chroma subsampling

minimum bit rate 0.7 Mbit/s

maximum bit rate 10 Mbit/s

GOP structure

H.265 dynamic hierarchical, closed size is configurable between 9 frames and 65 frames

SD video encoder option (R&S®AVS-K132)

R&S®AVS-K132 max. number of services 1 SD service in line with H.265

HD video encoder

Frame rate

Interlaced DVB 60 fields/s, 59.94 fields/s, 50 fields/s

Progressive DVB 60 frames/s , 59.94 frames/s, 50 frames/s

Frame size

Interlaced DVB horizontal (in pixels) × vertical (in pixels) (field rate in fields/s)

1920 × 1080 (60, 59.94, 50), 1440 × 1080 (50)

Progressive DVB horizontal (in pixels) × vertical (in pixels) (frame rate in frames/s)

1280 × 720 (60, 59.94, 50), 960 × 720 (50)

Aspect ratio

Wide if there is 4:3 video material at the input, black bars will be added on the left and right side

16:9




minimum bit rate 1 Mbit/s


GOP structure


HD video encoder options (R&S®AVS-K147 and R&S®AVS-K149)

R&S®AVS-K147 max. number of services 1 HD service in line with H.265 up to a resolution of 1920 × 1080 (progressive format)

R&S®AVS-K149 max. number of services 1 HD service in line with H.265 up to a resolution of 1920 × 1080 (interlaced format)



Specifications in briefUHD (4K) video encoder

Frame rate

Progressive 60 frames/s, 59.94 frames/s, 50 frames/s, 30 frames/s, 29.97 frames/s, 25 frames/s

Frame size

Progressive horizontal (in pixels) × vertical (in pixels) (frame rate in frames/s)

3840 × 2160 (60, 59.94, 50, 30, 29.97, 25)

Aspect ratio

Wide 16:9




minimum bit rate 10 Mbit/s


GOP structure


UHD (4K) video encoder option (R&S®AVS-K210)

R&S®AVS-K210 max. number of services 1 UHD service in line with H.265

1) H.265 corresponds to MPEG-H part 2 (HEVC).

For data sheet, see PD 3607.3697.2x and www.rohde-schwarz.com


14

Ordering informationDesignation Type Order No.R&S®AVS100 Audio/Video Processing Platform

AVS Base Unit;standard-independent; basic performance

R&S®AVS-BU050 5303.9955.02

AVS Base Unit;standard-independent; medium performance

R&S®AVS-BU100 5303.6156.04

AVS Base Unit;standard-independent; high performance

R&S®AVS-BU120 5303.9810.02


R&S®AVS-BU130 2119.0780.02


R&S®AVS-BU140 2119.0768.02

Hardware options for R&S®AVS100 audio/video processing platform

Input Extension for R&S®AVS100 base unit; adding 4 × 3G-/HD-SDI inputs R&S®AVS-B500 5303.9890.02

Input Extension for R&S®AVS100 base unit; adding 8 × HD-SDI inputs R&S®AVS-B510 5303.9961.02

Input/Output Extension for R&S®AVS100 base unit; adding 4 × 1 Gbit/s Ethernet interfaces

R&S®AVS-B600 5303.9932.02

Input/Output Extension for R&S®AVS100 base unit; adding 2 × 10 Gbit/s SFP interfaces R&S®AVS-B610 5303.9949.02

Input/Output Extension for R&S®AVS100 base unit; embedded extension adding 2 × 10 Gbit/s SFP interfaces

R&S®AVS-B620 5303.9984.02

Software options for R&S®AVS100 audio/video processing platform

DVB (Re)multiplexer; for multiplexing several transport streams into a DVB-S/DVB-T transport stream; the system can add, remove and recombine services

R&S®AVS-K101 5303.6179.02

DVB-T2 SPLP Gateway; for generating a DVB-T2 modular interface (T2-MI) single physical layer pipe (SPLP) transport stream (1 DVB/MPEG-2 transport stream)

R&S®AVS-K106 5303.6240.02

DVB-T2 MPLP Gateway; for generating a DVB-T2 modular interface (T2-MI) multiple physical layer pipe (MPLP) transport stream (multiple DVB/MPEG-2 transport streams)

R&S®AVS-K107 5303.6256.02

Teletext to DVB Subtitle Converter; for generating a DVB subtitle data stream out of a teletext input signal; includes subtitle format conversion function

R&S®AVS-K108 2119.0716.02

Decoder for HD Teletext (SMPTE 2031/OP-47); for extracting teletext data out of an HD-SDI/3G-SDI signal in line with SMPTE 2031/OP-47

R&S®AVS-K109 2119.0745.02

Scrambling via DVB Simulcrypt CA; parallel encryption of selected services via DVB Simulcrypt conditional access (CA) method

R&S®AVS-K111 5303.6585.02

R&S®CrossFlowIP Input; for dynamically routing A/V and data signals between main and alternate system hardware components at IP network level

R&S®AVS-K112 5303.6304.02

R&S®CrossFlowIP Output; for switching between the main and alternate path within the R&S®AVHE100 system to deliver a seamless output signal

R&S®AVS-K113 5303.6310.02

HD-SDI/SD-SDI Input Extension for R&S®AVG-B102 module; allowing 1 SD-SDI or 1 HD-SDI input signal to be applied to 1 AVG-B102 module

R&S®AVS-K114 5303.8171.02

DVB-T SFN Adapter; for inserting control and timing information into the generated trans-port stream to synchronize the transmitters in an SFN network

R&S®AVS-K115 5303.6327.02

SNMP Interface; for monitoring and controlling the R&S®AVHE100 via an umbrella network management system

R&S®AVS-K117 5303.9778.02

Extended PSI/SI Signaling Generator; for editing automatically generated PSI/SI tables and descriptors; the interface is XML-based and in line with the DVB syntax

R&S®AVS-K119 5303.9784.02

StatMux Manager; for controlling encoders in several statistical multiplex pools; requires an SD/HD encoder option

R&S®AVS-K120 5303.6362.02

1 SD H.264 Encoder; recoding/encoding of 1 SD service in line with H.264; encoding of up to 8 radio services included

R&S®AVS-K121 5303.8220.02

1 SD MPEG-2 Encoder; recoding/encoding of 1 SD service in line with MPEG-2; encoding of up to 8 radio services included

R&S®AVS-K131 5303.2115.02

1 SD H.265 Encoder; recoding/encoding of 1 SD service (540p) in line with H.265; encoding of up to 8 radio services included

R&S®AVS-K132 5303.2167.02

1 SD H.264 Encoder, APQ Mode; recoding/encoding of 1 SD service in line with H.264 in Rohde & Schwarz advanced picture quality (APQ) mode; encoding of up to 8 radio ser-vices included

R&S®AVS-K134 2119.0922.02

1 HD H.264 Encoder; recoding/encoding of 1 HD service or up to 3 SD services in line with H.264; encoding of up to 24 radio services included

R&S®AVS-K141 5303.6427.02

1 HD MPEG-2 Encoder; recoding/encoding of 1 HD service in line with MPEG-2; encoding of up to 24 radio services included

R&S®AVS-K146 5303.2121.02

1 HD H.265 Encoder 1080p; recoding/encoding of 1 HD service up to a resolution of 1920 × 1080 (progressive format) in line with H.265; encoding of up to 24 radio services included

R&S®AVS-K147 5303.2150.02



Designation Type Order No.1 HD H.265 Encoder 1080i; recoding/encoding of 1 HD service up to a resolution of 1920 × 1080 (interlaced format) in line with H.265; encoding of up to 24 radio services included

R&S®AVS-K149 2119.0022.02

Bundle of Licenses for Dolby® Audio Codecs – small; decoding/encoding of up to 10 audio channels, delivered or distributed in a Dolby® format (Dolby Digital™, Dolby Digital Plus™, Dolby® Pulse (high-efficiency AAC))

R&S®AVS-K150 5303.9732.02

Bundle of Licenses for Dolby® Audio Codecs – medium; decoding/encoding of up to 20 audio channels, delivered or distributed in a Dolby® format (Dolby Digital™, Dolby Digital Plus™, Dolby® Pulse (high-efficiency AAC))

R&S®AVS-K151 5303.8188.02

Bundle of Licenses for Dolby® Audio Codecs – large; decoding/encoding of up to 40 audio channels, delivered or distributed in a Dolby® format (Dolby Digital™, Dolby Digital Plus™, Dolby® Pulse (high-efficiency AAC))

R&S®AVS-K152 5303.8194.02

1 One-Seg Encoder; recoding/encoding of 1 one-seg service R&S®AVS-K161 5303.9761.02

Automation Controller; for automated reconfiguration of the R&S®AVHE100 system; reconfiguration can be launched by means of a scheduler or an external trigger

R&S®AVS-K200 5303.9749.02

Hybrid Redundancy; for combining 1+1 multiplexer/gateway redundancy with N+1 en-coder/chassis redundancy

R&S®AVS-K201 5303.9755.02

Internal Format Converter; for converting input signal formats to configurable output sig-nal formats; video signals can be scaled and/or de-/interlaced

R&S®AVS-K204 3622.4355.02

1 UHD HEVC Encoder; recoding/encoding of 1 UHD service in line with HEVC (H.265); encoding of up to 24 radio services included

R&S®AVS-K210 5303.2144.02

1 HD H.264 Encoder, APQ Mode; recoding/encoding of 1 HD service or up to 3 SD services in line with H.264 in Rohde & Schwarz advanced picture quality (APQ) mode; encoding of up to 24 radio services included

R&S®AVS-K230 2119.0939.02

R&S®AVG100 Audio/Video GatewayA/V Gateway Base Unit; for max. 5 modules; for connecting SD-SDI/HD-SDI, ASI and AES sources to the R&S®AVS100 and for outputting ASI signals

R&S®AVG-BU105 5303.6462.02

Options for R&S®AVG100 audio/video gatewaySerial Processing Module; for inputting up to 2 signals (any combination of ASI, SD-SDI, HD-SDI) or outputting a generated transport stream via ASI over up to 2 ports

R&S®AVG-B102 5303.6485.02

AES Input Module; extension for R&S®AVG-B102 offering 8 balanced AES/EBU inputs; use of both the R&S®AVG-B102 and the R&S®AVG-B103 requires one wide slot on the R&S®AVG-BU105

R&S®AVG-B103 5303.6527.02

Serial Splitting Module; for redundant distribution of 1 ASI/SDI signal to up to 3 sinks R&S®AVG-B104 5303.6504.02

Satellite Receiver Module; for reception of up to 2 DVB-S/DVB-S2 satellite signals; 2 integrated CI slots for decryption

R&S®AVG-B111 5303.6540.03

AccessoriesGPS/NTP Server; for time synchronization in IP-based networks (OCXO HQ oscillator) R&S®AVHE-B 5303.7717.02

GPS/NTP Server; for time synchronization in IP-based networks (TCXO oscillator) R&S®AVHE-B 5303.9990.02

Gigabit Ethernet Switch; for IP-based networks with 48 ports R&S®AVHE-B 5303.7723.03

Service level agreements (SLA)Basic Service Level R&S®AVHE-S-BAS 5303.8259.02

Advanced Service Level R&S®AVHE-S-ADV 5303.8265.02

Premium Service Level R&S®AVHE-S-PRM 5303.8271.02

Warranty R&S®AVHE-S-WRT 5303.8288.02

Your local Rohde & Schwarz expert will help you determine the optimum solution for your requirements.To find your nearest Rohde & Schwarz representative, visitwww.sales.rohde-schwarz.com


R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG

Trade names are trademarks of the owners

PD 3607.3697.12 | Version 01.00 | May 2016 (ch)

R&S®AVHE100 UHD/4K Encoding and Multiplexing Solution

Data without tolerance limits is not binding | Subject to change

© 2016 Rohde & Schwarz GmbH & Co. KG | 81671 Munich, Germany

Service that adds value❙ Worldwide ❙ Local and personalized❙ Customized and flexible❙ Uncompromising quality ❙ Long-term dependability

3607

.369

7.12

01.

00 P

DP

1 e

n

About Rohde & SchwarzThe Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and mea-surement, broadcast and media, secure communications, cybersecurity, radiomonitoring and radiolocation. Founded more than 80 years ago, this independent company has an extensive sales and service network and is present in more than 70 countries. The electronics group is among the world market leaders in its established business fields. The company is headquartered in Munich, Germany. It also has regional headquarters in Singapore and Columbia, Maryland, USA, to manage its operations in these regions.

Sustainable product design ❙ Environmental compatibility and eco-footprint ❙ Energy efficiency and low emissions ❙ Longevity and optimized total cost of ownership

Certified Environmental Management

ISO 14001Certified Quality Management

ISO 9001

Regional contact ❙ Europe, Africa, Middle East | +49 89 4129 12345 [email protected]

❙ North America | 1 888 TEST RSA (1 888 837 87 72) [email protected]

❙ Latin America | +1 410 910 79 88 [email protected]

❙ Asia Pacific | +65 65 13 04 88 [email protected]

❙ China | +86 800 810 82 28 | +86 400 650 58 96 [email protected]

Rohde & Schwarz GmbH & Co. KGwww.rohde-schwarz.com

3607369712


Date post:	23-Mar-2018
Category:	Documents
Upload:	vanduong
View:	221 times
Download:	1 times

R&S®AVHE100 UHD/4k Encoding and Multiplexing Solution · PDF fileSignal flow within the...

Documents