Entrematic – Ditec DAS 107 Plus Automatic Sliding Door Drive Unit
Performance
• The DAS 107 complies with all relevant European standards and the safety requirements of BS EN 16005.
• Up to 5 different program switch functions: Off, Automatic, Exit Only, Partial Open, Permanent Open.
• Battery back up to ensure opening on power failure
• Optional battery for continued operation on power failure
• Tested up to 1 Million cycles
• Plug & Play connectors and Automatic self-learning for quick set up
• Reinforced techno-polymer wheels in DUPONT™ Delrin® for smooth operation and long life
• Long-lasting automation with 24 V DC DUNKERMOTOREN™ with built-in Encoder
Ditec DAS107 PLUS is the new competitive solution incorporating Entrematic’s world renowned high quality and expertise.
A sliding door operator able to satisfy all requirements in commercial environments with door weights up to 160kg.
Designed to be easy and fast to install, Ditec DAS107 PLUS is the perfect choice for professionals in door automation who look for value and ease of maintenance.
Wide range switching power supply 100 V ÷ 240 V; 50/60 Hz
Key program selector ǁŝƚŚϱŽƉĞƌĂƟŶŐŵŽĚĞƐ
Easy and accurate ƐĞƫŶŐǁŝƚŚϮĚŝŐŝƚĚŝƐƉůĂLJ
Trolley with wheels in DupontTM Delrin® technopolymer and ĂŶƟͲĚĞƌĂŝůŝŶŐƐLJƐƚĞŵ
DUNKERMOTORENTM
gearmotor with ďƵŝůƚͲŝŶĞŶĐŽĚĞƌ
Emergency or ďĂĐŬͲƵƉďĂƩĞƌLJ;ŽƉƟŽŶĂůͿ
Anodized aluminium track
Plug & Play connectors
5012
+/-8
368
Activation & Safety Sensors Optex
8
Automatic Drive Units Micomdoor
88888
Micomdoor Slim 75Automatic Sliding Door Drive Unit
Performance
• The Slim-75 complies with all relevant European standards and the safety requirements of BS EN 16005
• Up to 5 different program switch functions: Off, Automatic, Exit Only, Partial Open, Permanent Open
• Battery back up to ensure opening on power failure (adjustable closing is also an option)
• Optional electric lock which can be interfaced with an access control system
• 100mm high drive unit height for optimum aesthetics
• System for monitoring tested safety sensors
• No external programming required
• Entrance Only or Exit Only option with type ‘B’ selector
The Slim-75 sliding door drive gives smooth and effective door operation from a compact 100mm high unit. The brushless DC motor ensure long term reliability and increased speed variations. The flexible design allows 1, 2 and 4 leaf configurations with one common drive system, whilst complying with the requirements of BS EN 16005.
The drive unit is self-learning so set up is easy and efficient whilst ensuring peak performance and optimum settings which improve the life of the system. All adjustments are done without the need of a service tool or additional components.
Micomdoor Slim 75 Automatic Sliding Door Drive Unit
1 2 3 4 5 6 7
1 - Motor- reducer
2 - EMICON Card
3 - Microprocessor controller
4 - Lock
5 - Carriage
6 - Stop
7 - Return wheel
The operator MICOMDOOR® SLIM-75 with a modern and elegant design, has a very quiet operation combining softness and robustness. Providing high power at any speed, it is controlled by the new electronics, equipped with redundant monitoring systems on all the components of the drive, guaranteeing a level of safety according to the new requirements established by the norm EN 16005 Level D for emergency exit, without the need for expensive doors with break-out anti-panic system.
Its Brushless three-phase 24 VDC motor accelerates very fast up to 820 mm / s. Controlled by its 16-bit microprocessor, it automatically adjusts all necessary parameters, providing maximum efficiency and precision in its movement. In addition, it allows to modify its configuration in a simple and fast way adapting its functionality to the different needs. The wheels are made of a special resin that transmits a low sound level for a long life, avoiding the high noise level produced by other materials ageing and wear.
• Reliable operator: strong components and low noise level
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005
• Suitable for single or double leaf configuration
• Self-cleaning track and carriers
• Automatic adaptation to traffic flow
The linear sliding door system GEZE ECdrive offers numerous convincing benefits at an excellent cost/performance ratio.
The ECdrive covers door leaf weights of up to 120 kg, is uncompromisingly reliable and suitable for doors in high traffic areas. Quality materials and the latest control technology guarantee efficient and smooth operation. Servicing costs are considerably reduced thanks to the self-cleaning roller carriage. The rounded hood in the elegant GEZE design gives the system an attractive appearance.
dormakaba – ES 200 Standard/Easy PlusAutomatic Sliding Door Drive Unit
Performance
• The ES 200 complies with all relevant European standards and the safety requirements of BS EN 16005.
• With DORMA PowerDrive: Dynamic driving phase control for particularly powerful operation with emergency power backup.
• Up to 5 different program switch functions: Off, Automatic, Exit Only, Partial Open, Permanent Open.
• Monitored battery back-up system for use on emergency escape routes.
• Sound-damping with replaceable track rail.
• Tested to 1,000,000 cycles.
• Slimline Contur 100mm operator height (option for 150mm).
The ES 200 STANDARD and ES 200 EASYplus are equipped with DORMA PowerDrive technology with identical mechanical components (specify Easyplus or Standard when specifying or ordering). With an extra powerful motor and dynamic driving phase control, the integrated PowerDrive system ensures safe and reliable operation. All basic parameters are easy to adjust using the integrated pushbuttons and display. No separate programming tools are necessary.
The ES 200 STANDARD is tested and approved for door systems of up to 2 x 160 kg / 1 x 200 kg and the ES 200 EASYplus is tested and approved for door systems of up to 2 x 120 kg / 1 x 200 kg. The ES 200 comes preinstalled with the BS EN 16005 module for self-monitored protection of the secondary closing edges, allowing you to dispense with safety screens where appropriate and connect side screen safety sensors.
Ambient Operating Temperature –20 to +60 °C –20 to +60 °C
Protection Level IP20 IP20
Opening Speed Max 10- 55cm/Sec 10- 70cm/Sec
Closing Speed Max 10- 50cm/Sec 10- 50cm/Sec
Hold Open Time 0 - 60 s 0 - 180 s
373
Activation & Safety Sensors Optex
888
Automatic Drive Units dormakaba
The heart of the ES 200 EASYplusThe prefabricated MiniDriveUnit with all the electrical components necessary is industrially tested and facilitates the assembly and maintenance of drive units. The control unit has proven its worth a thousand times in all imaginable fields of
application throughout the world.The MiniDriveUnit of the ES 200 EASYplus is equipped with the DIN 18650 / EN 16005 module as standard.
MiniDriveUnit (MDU)Components
1 MiniDriveUnit
2 Transformer
3 Motor
4 Decoder
5 Basic module (BM)
6 EN 16005- / DIN 18650-Modul
7 Run and installation profile
8 Battery pack (optional)
9 Carriage
10 Deflection roller
11 Service cover holder
12 End stopper
13 Door suspension withadjustment device
14 Belt connection
15 Riemenspannvorrichtung
1413
13
1
13
12
8
9
10
11
13
7
15
53
17 47
180
150
with FLEX
dormakaba – ES 200 Standard/Easy Plus Automatic Sliding Door Drive Unit
Entrematic – Ditec DAB-105 Automatic swing door drive unit
Performance
• High performance with up to 200 kg door weight using a push arm and 900mm door leaf configuration
• Reliable operator: strong components and real time self monitoring of the operator status
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005
• Very low noise level
• Tested to 1,000,000 cycles
• Suitable for fire doors
Convenient & Flexible
• Easy to install, to set, and to maintain: available PUSH or PULL configurations
• Easy program selection to expand functions
• Operator suitable for left & right hand applications
• Fully Automatic, Low Energy and Power assisted operation all included within the standard unit
Technical Specification
Max Door Weights
200 kg x 0.8 m (Push Arm)
150 kg x 0.8 m (Pull Arm)
Power Supply 100 - 240 V AC / 50-60 Hz
Power Input 0.5 A
Opening Time 3 - 6 s/(0-80°)
Closing Time 3 - 6 s/(90°-10°)
Operating Temperature
-20°C / +55°C (-10°C / +50°C with batteries)
Protection Level IP20
Dimensions mm (H x D x L) 111 x 131 x 720
The powerful, low noise operation and modern look makes the DAB-105 the ideal automation system for swing doors in commercial and public buildings, ensuring safe and reliable management of door movement in every situation. Multiple modes of operation including Fully Automatic and Low Energy are configurable and a spring return action ensures that the DAB-105 will close even after mains power failure.
Basic connections for safety sensors, activation devices and mains power supply are all that is required to have the DAB-105 up and running. Simplicity of installation is key to the DAB-105 operator’s success contributing to keeping it at the top of its class in the global market.
Entrematic – Ditec DAB-205 Automatic swing door drive unit
Performance
• High performance with up to 400 kg door weight using a push arm and 900mm door leaf configuration
• Reliable operator: strong components and real time self monitoring of the operator status
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005
• Tested to 1,000,000 cycles
• Suitable for fire doors
Convenient & Flexible
• Easy to install, to set, and to maintain: available PUSH or PULL configurations
• Easy program selection to expand functions
• Operator suitable for left & right hand applications
• Fully Automatic, Low Energy and Power assisted operation all included within the standard unit
Technical Specification
Max Door Weights
400 kg x 1.1 m (Push Arm)
300 kg x 0.9 m (Pull Arm)
Power Supply 100 - 240 V AC / 50-60 Hz
Power Input 1.0 A
Opening Time 2.5 - 12 s/(0-80°)
Closing Time 4 - 12 s/(90°-10°)
Operating Temperature
-20°C / +45°C (-10°C / +50°C with batteries)
Protection Level IP20
Dimensions mm (H x D x L) 111 x 131 x 720
The DAB-205 is a high performing and powerful swing-door operator capable of moving doors up to 400KG. The exceptional features of the unit mean that this product can be fitted in demanding applications such as commercial and public environments, including hospitals and airports, applications with high traffic flows.
Basic connections for safety sensors, activation devices and mains power supply are all that is required to have the DAB-205 up and running. Simplicity of installation is key to the DAB-205 operator’s success contributing to keeping it at the top of its class in the global market.
• High performance with up to 250 kg door weight using a push arm and 1600mm door leaf configuration
• Reliable operator: strong components and real time self monitoring of the operator status
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005.
• Door interlock feature built into the control board as standard
• Inverse operation of the doors can be set as standard (power close, spring open)
• Tested to 1,000,000 cycles
• Suitable for fire doors
Convenient & Flexible
• Easy to install, to set, and to maintain: available PUSH or PULL configurations
• Operator suitable for left & right hand applications
• Fully Automatic, Low Energy and Push and Go operation all included within the standard unit
The FD20 is a compact and light weight electro mechanical swing door drive unit providing quiet and smooth door operation. Characterised by advanced technology and functionality.
An integrated, user friendly joystick and LC display are used to quickly set relevant parameters (opening, closing time, safety monitoring etc). No additional external devices are required. Illuminated program selector keys and master switch are integrated into the side cover for intuitive operation. With exceptional strength, the robust FD20 is capable of reliably opening and closing doors even if exposed to wind speeds of up to 80 km/h (320Pa). In these particularly arduous conditions a reinforced closure (forced engagement of lock) can be activated to ensure the door closes against the strong winds.
Ingress protection rating of IP20 make the FD20 suitable for mounting internally in a wide variety of commercial and public sector applications. Electric locks/locking mechanism are directly connected to the control unit.
dormakaba – ED 100 / ED 250 Automatic Swing Door Operators
Performance• Elegant visual
appearance: DORMA Contur design provides an operator height of only 70mm.
• Low noise levels through multi–stage gearing.
• Efficient closing due to an electronic latching action enabling the motor to support the spring to overcome door seals, room to room pressure differentials and wind loads.
• Suitable for 60 minute fire rated doors for both push and pull application.
• The ED 100A / ED 250A along with all DORMA swing door operators provides sufficient force reserves.
Even when the system is used to the maximum the operator will always try to open and close the door perfectly within the statutory limits. DORMA swing door operators contribute to avoiding the loss of heat thereby contributing towards reducing a building’s carbon footprint.
• The ED 100A / ED 250A mainly closes via spring force. However, thanks to its direct drive, the motor automatically switches on to provide support when required. This assists the door to reach its closed position minimising energy loss.
The ED 100 and ED 250 is supplied with two distinct versions of operation, low energy operation and fully automatic operation. The low energy function is built into the standard unit however to achieve fully automatic parameters an additional function board must be added.
The ED 100 / ED 250 operators have an identical contemporary, unobtrusive design which is impressively small allowing them to blend in with the most architecturally sensitive environments. Features such as the ESM Energy Saving Mode function and Wind Load Control contribute towards reducing a building ‘s carbon footprint Both operators may be installed as push-version with standard arm or as pull-version with slide channel.
The ED 100 is suitable for doors with a weight of up to 100kg and a door width of up to 1,100 mm, the ED 250 is designed for doors with a width of up to 1,600 mm and a door weight of up to 250 kg.
Technical Specification
ED100 ED250
Max Door Weights 100KG 250KG
Max Leaf Width 1100mm 1600mm
Power Supply 230v AC 230v AC
Power Consumption 120W 240W
Max opening/ closing speed LE 27deg/sec 27deg/sec
Max opening/ Closing Speed A 50deg/sec 60deg/sec
Power Supply for Accessories 24V DC 1.5A 24V DC 1.5A
Ambient Operating temperature –15 to +50 °C –15 to +50 °C
Protection Level IP20 IP20
Dimensions mm (W x H x D) 685 x 70 x 130 685 x 70 x 130
• Standard: Push & Go function can be activated and deactivated as required
• Low maintenance requirements, high reliability and simple to adjust
• Fire version available
• Centre profile available for pairs of door applications
• Programme switch for the functions : - Off - Automatic - Permanently open
• Inverse version available
• Available in an EN7 version for doors up to 1600mm wide and 310KG
Technical Specification
Max Door Weights 250kg up to 1000mm wide leaf
Max Leaf Width 1400mm 100kg leaf
Power Supply 230v AC
Power Consumption 300W
Max Opening Speed Adjustable
Max Closing Speed Adjustable
Power Supply or Accessories 24V DC 1.2A
Ambient Operating Temperature -50 - +60 °C
Protection Level IP20
Dimensions mm (W x H x D)
690 x 100 x 120mm (Mounting plate +6mm depth)
Closing Force EN 3 – 6, adjustable
Hold Open Time 0 - 60 s
The GEZE TSA 160 NT is an electrohydraulic door drive suitable for the most demanding applications such as shopping centres and sports facilities. It incorporates an electromagnetic hold-open device, with adjustable spring force size EN 3-6.
Opening and closing speeds as well as damping can be adjusted with, hold-open time adjustable from 0 - 60 seconds. Fails close on power failure with 160 NT-F version suitable for fire and smoke doors.
• Low wear, maintenance free high performance motor for reliable operation
• 240V DC 1200mA supply for extended accessories
• Servo assist feature
• Push & Go feature
• Integeated 3 position rocker switch - Automatic - Off - Permanently Open
• All door parameters, for example opening and closing speed, end stop or hold-open time can be easily adjusted
• Suitable for fire doors
• Available as an inverse option
The electromechanical swing door drive GEZE Slimdrive EMD-F stands out due to its numerous areas of application. The compact drive is only 7 cm high and can move large and heavy internal and external doors comfortably and quietly. This makes the Slimdrive EMD-F the ideal solution wherever efficiency has to be coupled with silent running. State-of-the-art control technology combined with a low-wear and maintenance free high-power motor guarantees reliable operation even for doors which are heavily frequented. All door parameters e.g. opening and closing speed as well as latching action, can be optimally adapted.
Manual door opening can be supported by the drive (servo function) and ensures that even heavy doors can be opened more easily manually. The push & go function can be activated on request, i.e. the door is only slightly opened by hand and the automatic actuation opens the door completely. In low-energy mode, the drive moves the door at reduced speed. The optional CAN interface can be used to meet demanding requirements e.g. air lock control.
* = Direct installation1 = Space requirement for EMD-F/EMD Invers2 = Space requirement for link arm3 = Space requirement for sensor strips
* = Direct installation1 = Space requirement for EMD-F/EMD Invers2 = Space requirement for roller guide rail3 = Space requirement for sensor strips
* = Direct installation1 = Space requirement for EMD-F/EMD Invers2 = Space requirement for roller guide rail3 = Space requirement for sensor strips
386
Activation & Safety Sensors Optex
8
Automatic Drive Units Record
88888
Record DFA 127 Swing Door Drive Unit
(OPTIONAL)(OPTIONAL)
Performance
• BS EN 16005 compliant
• Optional Integrated sequential closing control for double-leaf fire door applications
• Approved as a hold-open system for fire protection barriers
• Extensive functionality without additional modules
• Drive housing available in stainless steel or aluminium
• Low energy, Inverse and Fire version available
The Record DFA 127 is a universal drive system for the automation of swing doors. It is characterized by sophisticated technology, compact design and smoothness of operation. The focus on a broad range of applications makes it a full-fledged drive, suitable for widely differing requirements. Its universal qualities are mainly due to its electro-mechanical construction, and partly due to its modular design. When the door drive motor operates, it simultaneously tensions a spring integrated in the drive housing. The shutting movement uses energy stored in the spring, which, depending on requirements, is also motor-assisted.
The Record DFA 127 is available to operate doors in sizes EN4 to EN6. The different spring forces required can be quickly and precisely adjusted on the spot using the special adjustment screw.
Technical Specification
Max Door Weights550KG for 600mm Leaf250KG for 900mm Leaf
NOTE - The kit can convert all the drive units shown above and all the components required are in the kit with the exception of the Besam Unislide, which needs the additional option Pack 13.
• Basic and Advanced programming using display and 3 buttons allowing configuration of 6 programmable inputs and 2 programmable outputs.
• Dedicated terminals for accessories and emergency inputs.
• Selection of fixing brackets supplied to aid fitting into various drive units
The A1400 RKU Retrofit Kit is simple to install and it is capable of retrofitting almost every commercial sliding door operator, including; Besam, Dorma, Ditec, Geze, Gilgen, Horton, Manusa, Record, Stanley and Tormax. (Grey cover is removable if space is limited).
Suitable for converting:- Besam ADS - Besam EMD - Ditec BIS-O - Ditec BIS-V - Dit ec Valor - Dorma ES200 - Geze TSA 350 - Geze TSA 360 - Gilgen SLX - Gilgen SLM - Record STA20- Manusa Activa
