RUBBER - COH Baines Ltd · PDF fileHollow 'D' 48 Fender Sections 97 Irregular Strips Flat...

SEVENTH

EDITION

ISO 9001:2000 APPROVED

RUBBER EXTRUSIONS

AND

MOULDINGS

CATALOGUE C O H BAINES LTD

Unit 3, Buckingham House, Longfield Road,

Tunbridge Wells, Kent, TN2 3EY

Telephone: 01892 543311

Fax: 01892 530682

e-mail [email protected]

BAINES

INDEX

EXTRUSIONS Page SUNDRIES Page

Angle Rubbers 38 Backlight Rubbers 105

Block Type 39 Buffers 103

Channel Plain Square 20 Bumpers 97

Channel Plain 'U' 25 Bushes 103

Channel With One Flange Caravan Sections 109

or Bead 27 Direct Glaze Trims 105

Channel With More Than Draught Excluders 88 & 95

One Addition 32 Extruded Plastic Sections 101

Door Seals 42 Felt Strip 96

Hollow 'D' 48 Fender Sections 97

Irregular Strips 50 Flat Rubber Strip 96

Miscellaneous 53 Gaiter 104

Pipings Double 62 Hose Radiator 96

Pipings Hollow 63 Hose Radiator Silicone 96

Pipings Solid 66 Jaguar Type Rubbers 106

Rest Rubbers 68 Joint Covers 98

Roof Rubbers & Running Matting 99

Board Treads 71 Mini Guy and Ties 98

Slit Rounds 72 Mountings 103

'T' Sections & Windscreen Patterns 73 Over Rider Plastic 100

Weatherstrips 83 Polyethylene Sponge Strip 93

Wedge Rubbers 81 Plastic Chrome Trims 99

Wrap Over Sections 82 Plastic Wing Piping 101 Quarter Light Rubbers 105

Running Board Tread 92

Sheeting 104

Sliding Window Channel 94

Sponge Cord 92

Sponge Extrusions 90

Sponge (Fully Skinned Rectangles) 92

Sponge Neoprene Strip 92

Titanfast 87

Tools 86 & 112

Waist Strips 95 & 102

Windscreen Rubbers 105

RUBBER EXTRUSIONS AND MOULDINGS 3

EXTRUSIONS Pages 20 to 85 show the range of extrusion dies that we have available and to

the best of our ability are shown actual size. We have indicated which sections

that are normally carried in stock and although we can supply the others, they

are subject to minimum production quantities, which depend on the size of the

section concerned. Please enquire, we will be happy to give you the exact

postion on any given section.

All profiles are manufactued to BS 3734, 1978 tolerances.

The full part number is shown underneath each section. Mostly they are made in

commercial EPDM but some are in other compounds which are denoted by the letters

below following the number.

Listed below is a guide to these codes which :-

EP Ethylene Proplylene Diene Monomer.

EPJ Ethylene Proplylene Diene Monomer. Jaguar type section.

J Natural commercial. Jaguar type section.

FQ Food Quality.

N Neoprene (Chloroprene).

NT Nitrile.

S Silicone.

SQ Steam Quality.

W/S Good weather resistant quality.

Used on our Weatherstrip range.

4 RUBBER EXTRUSIONS

Compound Information Natural Commercial Rubber

Good general purpose material where oil and

heat resistance is not required.

+ Very good mechanical properties.

+ Medium weather resistance.

+ Good resilience and elastic properties.

+ Fair to good alkali and acid resistance.

- Affected by oils, fats, fuels, and oxydising acids.

EPDM (Ethylene Propylene Diene Monomer)

This material has excellent weather and heat

resistant properties and is widely used for

glazing and refrigeration applications.

+ Excellent weather resistance.

+ Good Heat resistance.

+ Good low temperature resistance.

+ Resistant to steam temperatures up to 120 degrees C.

continuous and 150 degrees C intermittantly.

+ No migration stain of rigid UPVC materials.

- Affected by oils and fats.

Neoprene (Chloroprene)

Good resistance to heat and moderate chemicals

and moderate resistance to oils. Has good

characteristics to resist seawater, acids, fats,

greases and many solvents. Neoprene has good

ozone resistance and when a special additive is

included has excellent flame retardent

properties.


+ Good mechanical properties.

+ Moderately resistant to oils and fats.

+ Flame resistant and can be flame retardent. -

Poor low temperature properties.

Nitrile (NBR)

Widely used in 'O' ring kits, resistant to

petrol, fats, oil, greases and chemicals.

+ Excellent resistance to oils and fuels. +

Good hot-oil resistance.

+ Good mechanical properties.

+ Good alkali and acid resistance. -

Moderate weather resistance.

- Moderate elasticity.

- Moderate low temperature properties. -

Moderate ozone resistance except for

compounds with PVC blends.

Silicone

An expensive material suitable for

applications demanding good ozone resistance

and performance at extreme temperatures from -

80 degrees C. to + 250 degrees C.

+ Heat resistance up to + 250 degrees C. +

Retains flexibility in extremely low

temperatures.


+ Excellent electrical resistivity.

+ Moderate Oil and fat resistance

(special grades only).

+ Moderate fuel resistance

(special grades only).

- Poor mechanical properties.

RUBBER EXTRUSIONS 5

BAINES EXTRUSION INDEX

PART NO. GROUP PAGE IRS 0001 Channel Plain Square 20

IRS 0002 Channel Plain Square 20

IRS 0003 Channel Plain Square 20 IRS 0004 Channel Plain 'U' 25

IRS 0005 Channel Plain 'U' 25

IRS 0009 Channel Plain Square 20 IRS 0010 Channel Plain Square 20

IRS 0011 Channel With One Flange or Bead 27

IRS 0012 Channel With One Flange or Bead 27 IRS 0013 Channel With One Flange or Bead 27


IRS 0015 Channel With One Flange or Bead 27 IRS 0016 Channel With One Flange or Bead 27 IRS 0017 Channel With One Flange or Bead 27



IRS 0021 Channel With More Than One Addition 32 IRS 0022 Channel With One Flange or Bead 27

IRS 0023 Channel With More Than One Addition 32












IRS 0037 Channel With One Flange or Bead 27 IRS 0038 'T' Section 73

IRS 0039 'T' Section 73

IRS 0040 'T' Section 73 IRS 0041 'T' Section 73




















PART NO. GROUP PAGE


IRS 0067 'T' Section 73 IRS 0068 Door Seal 42

IRS 0069 Door Seal 42

IRS 0070 Door Seal 42 IRS 0071 Door Seal 42





IRS 0077 Piping Double 62



IRS 0080 Piping Double 62 IRS 0081 Piping Double 62

IRS 0082 Piping Hollow 63

IRS 0083 Piping Hollow 63 IRS 0084 Piping Hollow 63










IRS 0096 Piping Solid 66

IRS 0097 Piping Solid 66 IRS 0098 Piping Solid 66


IRS 0100 Piping Solid 66 IRS 0101 Piping Solid 66


IRS 0103 Irregular Strip 50 IRS 0104 Angle Rubber 38

IRS 0105 Irregular Strip 50





IRS 0110 Irregular Strip 50 IRS 0111 Irregular Strip 50



IRS 0114 Rest Rubber 68

IRS 0115 Rest Rubber 68 IRS 0116 Rest Rubber 68



IRS 0120 Rest Rubber 68 IRS 0121 Door Seal 42


IRS 0123 Wrap Over 82 IRS 0124 Rest Rubber 68


IRS 0126 Irregular Strip 50 IRS 0127 Miscellaneous 53

IRS 0128 Miscellaneous 53 IRS 0129 Channel Plain 'U' 25

RUBBER EXTRUSIONS 6


PART NO. GROUP PAGE IRS 0130 'T' Section 73


IRS 0132 Running Board Tread 71 IRS 0133 Running Board Tread 71

IRS 0134 Running Board Tread 71

IRS 0135 Running Board Tread 71 IRS 0136 Angle Rubber 38

IRS 0137 Angle Rubber 38

IRS 0138 Angle Rubber 38 IRS 0139 Angle Rubber 38

IRS 0140 Miscellaneous 53

IRS 0141 Running Board Tread 71 IRS 0142 Wrap Over 82 IRS 0143 Wedge Rubber 81


IRS 0145 'T' Section 74 IRS 0146 Rest Rubber 68

IRS 0147 Rest Rubber 68 IRS 0148 'T' Section 74


IRS 0150 Channel With More Than One Addition 32 IRS 0151 'T' Section 74









IRS 0160 Wrap Over 82

IRS 0161 Irregular Strip 50 IRS 0162 Running Board Tread 71

IRS 0163 Running Board Tread 71 IRS 0164 'T' Section 74


IRS 0166 Miscellaneous 53 IRS 0167 Channel With One Flange or Bead 27









IRS 0177 Channel With More Than One Addition 32 IRS 0178 Irregular Strip 50

IRS 0179 Piping Hollow 63 IRS 0180 Channel With One Flange or Bead 27




IRS 0185 Miscellaneous 53 IRS 0186 Channel With More Than One Addition 32



IRS 0189 Miscellaneous 53 IRS 0190 Piping Solid 66



PART NO. GROUP PAGE IRS 0193 'T' Section 74 IRS 0194 'T' Section 74


IRS 0196 Miscellaneous 53 IRS 0197 'T' Section 74










IRS 0207 'T' Section 74 IRS 0208 Running Board Tread 71

IRS 0209 Irregular Strip 50 IRS 0210 Rest Rubber 68










IRS 0221 Running Board Tread 71 IRS 0222 Running Board Tread 71


IRS 0224 'T' Section 74 IRS 0225 Piping Solid 66


IRS 0227 Channel With One Flange or Bead 27 IRS 0228 Rest Rubber 68


IRS 0230 Door Seal 42 IRS 0231 'T' Section 74







IRS 0240 'T' Section 74 IRS 0241 Irregular Strip 50

IRS 0242 Block Type 39

IRS 0243 Channel Plain Square 20 IRS 0244 Miscellaneous 53










RUBBER EXTRUSIONS 7


PART NO. GROUP PAGE

IRS 0255 Channel With One Flange or Bead 27 IRS 0256 Miscellaneous 53


IRS 0258 Channel Plain Square 20 IRS 0259 Piping Hollow 63






IRS 0265 'T' Section 75 IRS 0266 Channel With One Flange or Bead 27




IRS 0271 Channel Plain Square 20 IRS 0272 Rest Rubber 68












IRS 0285 Irregular Strip 50 IRS 0286 'T' Section 75


IRS 0288 Slit Round 72



IRS 0291 Angle Rubber 38 IRS 0292 Piping Solid 66




IRS 0296 Miscellaneous 53 IRS 0297 Rest Rubber 68


IRS 0299 Wedge Rubber 81 IRS 0300 Miscellaneous 53



IRS 0304 Wedge Rubber 81





IRS 0309 Channel With One Flange or Bead 27 IRS 0310 Running Board Tread 71


IRS 0312 Channel With One Flange or Bead 28 IRS 0313 Door Seal 42


IRS 0315 Channel Plain Square 20 IRS 0316 'T' Section 75

PART NO. GROUP PAGE









IRS 0327 Channel With More Than One Addition 32 IRS 0328 Door Seal 42






IRS 0336 Angle Rubber 38 IRS 0337 Channel With One Flange or Bead 28




IRS 0341 Channel With More Than One Addition 32 IRS 0342 Miscellaneous 53

IRS 0343 Door Seal 42 IRS 0344 Piping Solid 66




IRS 0349 Miscellaneous 53 IRS 0351 Door Seal 42






















IRS 0378 Irregular Strip 50 IRS 0379 Piping Hollow 63



RUBBER EXTRUSIONS 8






IRS 0387 Irregular Strip 51 IRS 0388 Rest Rubber 68


IRS 0390 'T' Section 75 IRS 0391 Channel Plain Square 20


IRS 0393 Channel With More Than One Addition 32 IRS 0394 Rest Rubber 69 IRS 0395 Channel Plain Square 20



IRS 0399 Piping Solid 66 IRS 0400 'T' Section 75












IRS 0413 'T' Section 75 IRS 0414 Miscellaneous 53

IRS 0415 Channel Plain 'U' 25 IRS 0416 Channel With One Flange or Bead 28


IRS 0418 Irregular Strip 51 IRS 0419 Channel With One Flange or Bead 28










IRS 0430 Channel Plain 'U' 25 IRS 0431 Irregular Strip 51


IRS 0433 Hollow 'D' 48 IRS 0434 Channel With One Flange or Bead 28


IRS 0436 Piping Hollow 63 IRS 0437 Piping Solid 66



IRS 0440 Channel With More Than One Addition 32 IRS 0441 Channel With More Than One Addition 32



PART NO. GROUP PAGE












IRS 0458 Block Type 39 IRS 0459 Miscellaneous 53


IRS 0461 Running Board Tread 71 IRS 0462 'T' Section 76







IRS 0472 Door Seal 42 IRS 0473 Channel With More Than One Addition 32


IRS 0475 Channel With One Flange or Bead 28 IRS 0476 Channel With More Than One Addition 32



IRS 0479 Miscellaneous 53 IRS 0480 Miscellaneous 54

IRS 0481 Hollow 'D' 48





IRS 0487 Wrap Over 82 IRS 0488 'T' Section 76









IRS 0498 Channel With One Flange or Bead 28 IRS 0499 Piping Hollow 63

IRS 0500 'T' Section 76 IRS 0501 Channel With More Than One Addition 32





RUBBER EXTRUSIONS 9


PART NO. GROUP PAGE IRS 0507 Piping Hollow 63




IRS 0512 Channel With One Flange or Bead 29 IRS 0513 Running Board Tread 71


IRS 0515 Piping Double 62 IRS 0516 Miscellaneous 54


IRS 0518 'T' Section 76 IRS 0519 Irregular Strip 51 IRS 0520 Rest Rubber 69


IRS 0523 Channel Plain 'U' 25 IRS 0524 'T' Section 76

IRS 0526 Channel With More Than One Addition 33 IRS 0527 Piping Solid 66


IRS 0529 Running Board Tread 71 IRS 0530 Channel With More Than One Addition 33










IRS 0540 Irregular Strip 51 IRS 0541 Door Seal 42



IRS 0546 Running Board Tread 71 IRS 0547 Wedge Rubber 81










IRS 0558 Slit Round 72 IRS 0559 Channel With More Than One Addition 33










PART NO. GROUP PAGE


IRS 0574 Rest Rubber 69 IRS 0575 Piping Double 62








IRS 0583 Piping Solid 66 IRS 0584 'T' Section 76




IRS 0589 Channel Plain Square 20 IRS 0590 Piping Hollow 63 IRS 0591 Piping Hollow 63





IRS 0599 'T' Section 76 IRS 0600 Channel With More Than One Addition 33







IRS 0609 Irregular Strip 51 IRS 0610 Channel With One Flange or Bead 29


















IRS 0634 Weatherstrip 83



RUBBER EXTRUSIONS 10


PART NO. GROUP PAGE IRS 0638 Channel With One Flange or Bead 29






IRS 0647 Miscellaneous 54 IRS 0648 Channel Plain Square 20


IRS 0650 'T' Section 77 IRS 0651 Door Seal 42 IRS 0652 Channel With One Flange or Bead 29



IRS 0658 Channel Plain 'U' 25 IRS 0660 Channel With One Flange or Bead 29
























IRS 0690 Channel With One Flange or Bead 29 IRS 0691 Piping Solid 66

IRS 0692 Channel With More Than One Addition 33 IRS 0693 Angle Rubber 38







IRS 0702 Block Type 39 IRS 0703 Slit Round 72



PART NO. GROUP PAGE


IRS 0707 Door Seal 43 IRS 0708 Piping Hollow 64








IRS 0716 Door Seal 43 IRS 0717 Irregular Strip 51




IRS 0722 Door Seal 43 IRS 0723 'T' Section 77 IRS 0724 'T' Section 77



IRS 0728 Channel Plain 'U' 25 IRS 0729 Door Seal 43



IRS 0732 Rest Rubber 69 IRS 0733 'T' Section 77


IRS 0735 Channel Plain Square 21 IRS 0736 Weatherstrip 83






IRS 0742 Door Seal 43 IRS 0743 Miscellaneous 55




IRS 0747 Weatherstrip 83 IRS 0748 Door Seal 43


IRS 0750 Wrap Over 82 IRS 0751 Miscellaneous 55









IRS 0763 Channel With One Flange or Bead 29 IRS 0764 Block Type 39





PART NO. GROUP PAGE IRS 0768 Weatherstrip 83


IRS 0770 Weatherstrip 84 IRS 0772 Weatherstrip 83


IRS 0774 Block Type 39 IRS 0775 Door Seal 43




IRS 0780 Channel With More Than One Addition 33 IRS 0781 Block Type 39 IRS 0782 Channel Plain Square 21





IRS 0790 Channel With More Than One Addition 33 IRS 0791 Piping Hollow 64










IRS 0801 Channel With More Than One Addition 33 IRS 0802 Piping Hollow 64



IRS 0806 Slit Round 72 IRS 0807 Miscellaneous 55









IRS 0817 Irregular Strip 51 IRS 0818 'T' Section 77

IRS 0820 Rest Rubber 69 IRS 0821 Channel With More Than One Addition 33


IRS 0823 Channel Plain Square 21 IRS 0825 Hollow 'D' 48


IRS 0827 Piping Double 62 IRS 0828 Channel With One Flange or Bead 29






PART NO. GROUP PAGE


IRS 0836 Rest Rubber 69 IRS 0837 Wedge Rubber 81












IRS 0851 Miscellaneous 55 IRS 0852 Channel Plain Square 21 IRS 0853 Block Type 39



IRS 0859 Channel With More Than One Addition 34 IRS 0860 Block Type 39


IRS 0862 Rest Rubber 69 IRS 0863 Miscellaneous 55







IRS 0873 Channel Plain Square 21 IRS 0874 Door Seal 43











IRS 0888 Angle Rubber 38 IRS 0889 Angle Rubber 38


IRS 0891 Block Type 39 IRS 0892 Channel Plain Square 21

IRS 0893 Miscellaneous 55 IRS 0894 Hollow 'D' 48


IRS 0896 Block Type 39 IRS 0897 Channel With More Than One Addition 34









IRS 0906 Angle Rubber 38 IRS 0907 Miscellaneous 56




IRS 0912 'T' Section 78 IRS 0913 Channel Plain 'U' 25


IRS 0915 Channel Plain Square 21 IRS 0916 'T' Section 78 IRS 0917 Block Type 39



IRS 0921 Door Seal 43 IRS 0922 Channel Plain Square 21


IRS 0924 Channel With One Flange or Bead 30 IRS 0925 Angle Rubber 38













IRS 0942 'T' Section 78 IRS 0943 Wedge Rubber 81









IRS 0953 Wrap Over 82 IRS 0954 Channel Plain Square 21

IRS 0955 Miscellaneous 56 IRS 0956 Wrap Over 82


IRS 0958 Piping Solid 66 IRS 0959 Rest Rubber 69


IRS 0961 Door Seal 43 IRS 0963 Piping Hollow 64






PART NO. GROUP PAGE












IRS 0984 Miscellaneous 56 IRS 0985 Running Board Tread 71


IRS 0987 Angle Rubber 38 IRS 0988 Miscellaneous 56 IRS 0990 Miscellaneous 56

IRS 0991 Rest Rubber 70 IRS 0992 Miscellaneous 56


IRS 0994 Piping Hollow 64 IRS 0995 Channel Plain Square 21


IRS 0997 Channel With More Than One Addition 34 IRS 0998 Wedge Rubber 81





IRS 1006 Channel Plain 'U' 25 IRS 1007 Channel With More Than One Addition 34













IRS 1022 Channel Plain 'U' 25 IRS 1023 Miscellaneous 56


IRS 1025 Piping Solid 66 IRS 1026 Block Type 39







IRS 1036 Channel Plain Square 22 IRS 1037 Block Type 39



PART NO. GROUP PAGE IRS 1038 Irregular Strip 51


IRS 1040 Channel With More Than One Addition 34 IRS 1041 Channel Plain Square 22


IRS 1043 Channel Plain Square 22 IRS 1044 Channel With More Than One Addition 34




IRS 1049 Door Seal 44 IRS 1050 Door Seal 44 IRS 1051 Door Seal 44


IRS 1053 Channel With More Than One Addition 34 IRS 1054 Rest Rubber 70

IRS 1055 Miscellaneous 56 IRS 1056 Block Type 39










IRS 1067 'T ' Section 78





IRS 1074 Channel Plain Square 22 IRS 1075 Irregular Strip 51









IRS 1084 Door Seal 44 IRS 1085 Block Type 39





IRS 1094 Running Board Tread 71 IRS 1095 Weatherstrip 83



IRS 1100 Weatherstrip 84 IRS 1101 Miscellaneous 57



PART NO. GROUP PAGE


IRS 1105 Piping Solid 67 IRS 1106 Channel Plain Square 22







IRS 1114 Channel With One Flange or Bead 30 IRS 1115 Block Type 40




IRS 1120 Channel Plain Square 22 IRS 1121 Block Type 40












IRS 1133 Hollow 'D' 48 IRS 1134 Block Type 40


IRS 1136 Door Seal 44 IRS 1137 Rest Rubber 70
















IRS 1157 Door Seal 44 IRS 1158 Channel With One Flange or Bead 30






IRS 1166 Piping Double 62 IRS 1167 Door Seal 44











IRS 1185 Miscellaneous 57 IRS 1186 Weatherstrip 84 IRS 1187 Channel Plain Square 22





IRS 1194 Channel With One Flange or Bead 30 IRS 1195 Weatherstrip 84










IRS 1206 Miscellaneous 57 IRS 1207 Hollow 'D' 48



IRS 1211 Weatherstrip 84 IRS 1213 Channel Plain Square 22

IRS 1215 'T' section 78








IRS 1223 Hollow 'D' 48 IRS 1224 'T' Section 78

IRS 1225 Channel With One Flange or Bead 30 IRS 1227 Channel Plain Square 22


IRS 1229 Block Type 40 IRS 1230 Block Type 40





IRS 1237 Channel Plain Square 22 IRS 1238 Channel Plain 'U' 25



PART NO. GROUP PAGE









IRS 1252 Weatherstrip 84 IRS 1253 'T' Section 78


IRS 1255 Irregular Strip 51 IRS 1256 Weatherstrip 85


IRS 1258 Irregular Strip 52 IRS 1259 Channel With More Than One Addition 35





























IRS 1295 Weatherstrip 83 IRS 1296 Channel Plain Square 23



IRS 1300 Piping Double 62 IRS 1301 Door Seal 45





PART NO. GROUP PAGE IRS 1305 Door Seal 45


IRS 1307 Piping Hollow 64 IRS 1309 Miscellaneous 57






IRS 1318 Channel Plain Square 23 IRS 1319 Rest Rubber 70 IRS 1320 Angle Rubber 38


IRS 1322 Rest Rubber 70 IRS 1323 Block Type 40



IRS 1330 Channel Plain Square 23 IRS 1331 Irregular Strip 52










IRS 1342 Channel Plain 'U' 25 IRS 1345 Channel Plain Square 23




















IRS 1374 Miscellaneous 58 IRS 1375 Piping Hollow 64



PART NO. GROUP PAGE










IRS 1388 Door Seal 45 IRS 1390 Hollow 'D' 48






IRS 1399 Piping Hollow 65 IRS 1400 Block Type 40











IRS 1415 Hollow 'D' 48 IRS 1416 Door Seal 45











IRS 1428 Channel With One Flange or Bead 30 IRS 1429 Wrap Over 82




















IRS 1454 Irregular Strip 52 IRS 1455 'T' Section 79 IRS 1456 'T' Section 79


IRS 1458 'T' Section 79 IRS 1459 Hollow 'D' 48

IRS 1460 Hollow 'D' 48 IRS 1461 Door Seal 46


IRS 1463 Irregular Strip 52 IRS 1464 Irregular Strip 52






















IRS 1491 Door Seal 46 IRS 1492 Channel With One Flange or Bead 30









PART NO. GROUP PAGE





IRS 1510 Channel With More Than One Addition 36 IRS 1511 Piping Hollow 65 IRS 1512 Channel Plain Square 23





IRS 1519 Hollow 'D' 48 IRS 1520 Block Type 40


















IRS 1544 Door Seal 46 IRS 1546 Channel Plain Square 23























IRS 1576 Hollow 'D' 48 IRS 1577 Miscellaneous 59




IRS 1582 Miscellaneous 59 IRS 1583 Miscellaneous 59 IRS 1584 Channel With More Than One Addition 36


















IRS 1607 Door Seal 47 IRS 1608 Piping Solid 67




















PART NO. GROUP PAGE











IRS 1644 Channel With More Than One Addition 36 IRS 1645 Channel Plain Square 24




IRS 1650 Miscellaneous 60 IRS 1651 Weatherstrip 84


IRS 1653 Weatherstrip 85 IRS 1654 Miscellaneous 60










IRS 1668 Door Seal 47 IRS 1669 Weatherstrip 84


IRS 1671 Weatherstrip 85 IRS 1672 'T' Section 80





IRS 1681 Weatherstrip 85 IRS 1682 Piping Hollow 65















PART NO. GROUP PAGE PART NO. GROUP PAGE





IRS 1703 Hollow 'D' 49 IRS 1772 Channel Plain Square 24























IRS 1732 Weatherstrip 83 IRS 1734 Block Type 41





IRS 1742 Hollow 'D' 49 IRS 1743 Channel With More Than One Addition 37









IRS 1755 'T' Section 80 IRS 1756 Hollow 'D' 49









EXTRUSIONS Actual size CHANNEL PLAIN SQUARE

* = NORMALLY STOCKED 4.75mm or

6.3mm inside

width

IRS 0001 IRS 0002-4.75MM IRS 0003 IRS 0009

IRS 0010EP IRS 0243EP IRS 0258EP IRS 0267

4.75mm, 6.3mm, 8mm 4.75mm or 4.75mm, 6.3mm or 12.5mm 6.3mm inside or 12.5mm

inside width width inside width

IRS 0270 IRS 0271 IRS 0315 IRS 0320

IRS 0382EP IRS 0391 IRS 0395 IRS 0427EP

IRS 0443N IRS 0445EP IRS 0455 IRS 0478

IRS 0496EP IRS 0506EP IRS 0509 IRS 0528N

IRS 0557 IRS 0562 IRS 0564EP

4.75mm or 3mm or

10mm inside 4.75mm inside

width width


IRS 0641 IRS 0648 IRS 0673EP IRS 0684EP

20 RUBBER EXTRUSIONS

EXTRUSIONS Actual size CHANNEL PLAIN SQUARE Cont'd

* = NORMALLY STOCKED IRS 0685EP IRS 0694EP IRS 0698N IRS 0699

IRS 0712 IRS 0730


IRS 0809 IRS 0823N IRS 0826EP * IRS


IRS 0883EP IRS 0892N IRS 0901EP IRS 0904EP

IRS 0911EP IRS 0915 IRS 0922N IRS 0923N

IRS 0932EP IRS 0935 IRS 0944 IRS 0954

IRS 0964 IRS 0978 IRS 0995 IRS 1001N

RUBBER EXTRUSIONS


* = NORMALLY STOCKED IRS 1008EP IRS 1013 IRS 1020EP IRS 1027

IRS 1036 IRS 1041 IRS 1043

IRS 1078 IRS 1083N IRS 1102 IRS 1074

IRS 1106 IRS 1117N IRS 1119 IRS 1120EP

IRS 1125 IRS 1155

IRS 1156 IRS 1129 IRS 1130 IRS 1163

IRS 1168N * IRS 1179EP * IRS 1187N

IRS 1198 IRS 1178WN IRS 1213 *

IRS 1227 IRS 1228 IRS 1237 IRS 1222



* = NORMALLY STOCKED

IRS 1239 IRS 1262 IRS 1318

IRS 1330N IRS 1339EP IRS 1296EP

IRS 1363N IRS 1364N IRS 1365N IRS 1345

IRS 1407EP IRS 1425N

IRS 1424EP IRS 1488N

IRS 1469 IRS 1502EP

IRS 1536N IRS 1512 IRS 1513

IRS 1542NT IRS 1540 IRS 1546N IRS 1547EP

IRS 1557WEP IRS 1600 IRS 1617EP IRS 1636EP




IRS 1690S IRS 1691N

IRS 1667EP IRS 1700EPJ * IRS 1708EP

IRS 1645 IRS 1713EP IRS 1736EP IRS 1749N.FR

IRS 1750N.FR IRS 1772NT IRS 1783EP


IRS 1238N

EXTRUSIONS Actual size CHANNEL PLAIN "U"


IRS 0004EP IRS 0005EP IRS 0129 IRS 0250E

IRS 0277N IRS 0415 IRS 0429N

IRS 0430EP IRS 0523 IRS 0425 IRS 0576N

IRS 0658EP IRS 0728N IRS 0805N IRS 0833N

IRS 0856 IRS 0913 IRS 0965

IRS 0976 IRS 0879 IRS 1006IRS

IRS 1022N

IRS 1098EP

IRS 1143 IRS 1338

IRS 1268N IRS 1342 * IRS 1462EP


EXTRUSIONS Actual size CHANNEL PLAIN "U" Cont'd


IRS 1530N IRS 1623 IRS 1727EP

IRS 1508


EXTRUSIONS Actual size CHANNEL WITH ONE FLANGE OR BEAD


4.75mm or

6.3mm glass

channel

IRS 0011 IRS 0012EP IRS 0013 IRS 0014

4.75mm or

6.3mm glass

channel

IRS 0015 IRS 0016 IRS 0017 IRS 0018

4.75mm or

6.3mm glass

channel

IRS 0019 IRS 0020 IRS 0022 IRS 0024

IRS 0025 IRS 0026 IRS 0027 IRS 0028

4.75mm or 4.75mm or 6.3mm glass 6.3mm glass channel channel

IRS 0029 IRS 0030 IRS 0031 IRS 0032

4.75mm or 4.75mm or 4.75mm or 6.3mm

6.3mm glass 6.3mm glass glass

channel channel channel

IRS 0033 IRS 0034 (4.75mm) IRS 0035 IRS 0036EP

IRS 0037 IRS 0159EP IRS 0167 IRS 0180

IRS 0187 IRS 0227EP IRS 0234 IRS 0255

IRS 0257 IRS 0266 IRS 0289 IRS 0309


EXTRUSIONS Actual size CHANNEL WITH ONE

FLANGE OR B EAD Cont'd


IRS 0312 IRS 0319N IRS 0334 IRS 0337

IRS 0339 IRS 0346 IRS 0352 IRS 0353EP

IRS 0354 IRS 0356 IRS 0365 IRS 0373

4.75mm or 4.75mm or 6.3mm glass 6.3mm glass channel channel

IRS 0376 IRS 0377 IRS 0381 IRS 0386

IRS 0397-6.3MM EP IRS 0403 IRS 0416 IRS 0419-6.3MM

4.75mm or

6.3mm glass channel

IRS 0420EP IRS 0421EP IRS 0423 IRS 0434

4.75mm or

6.3mm glass

channel

IRS 0435 IRS 0447 IRS 0449 IRS 0451

4.75mm or

6.3mm glass

channel

IRS 0470 IRS 0475EP IRS 0477 IRS 0485

IRS 0497 IRS 0498 IRS 0502 IRS 0503



FLANGE OR B E AD Cont'd


IRS 0508EP IRS 0512 IRS 0522 IRS 0532

IRS 0534 IRS 0537 IRS 0545 IRS 0549

IRS 0550 IRS 0577 IRS 0602 IRS 0610

IRS 0618 IRS 0619 IRS 0621 IRS 0625

IRS 0630 IRS 0632EP IRS 0636EP IRS 0638EP

IRS 0644 IRS 0652EP IRS 0657 IRS 0660

IRS 0677 IRS 0690 IRS 0697 IRS 0754

IRS 0762 IRS 0763 IRS 0778 IRS 0784

IRS 0794 IRS 0797 IRS 0803 IRS 0828



FLANGE OR BEAD Cont'd


IRS 0829 IRS 0831EP IRS 0841 IRS 0884N

IRS 0905 IRS 0924EP IRS 0928 IRS 0929N

IRS 0950 IRS 0999 IRS 1009 IRS 1014

IRS 1077EP IRS 1114N IRS 1126 IRS 1158N

IRS 1194 IRS 1210W IRS 1225 IRS 1235N


IRS 1349N IRS 1382EP IRS 1398EP IRS 1423EP


IRS 1481N IRS 1482N IRS 1492EP



FLANGE OR BEAD C ont'd


IRS 1561EP IRS 1586EP

IRS 1507EP IRS 1609EP IRS 1635NT IRS 1588EP

IRS 1642EP IRS 1666EP IRS 1699EPJ IRS 1716EP

IRS 1720E IRS 1764EP


EXTRUSIONS Actual size CHANNEL WITH MORE

THAN ONE A DDITION

* = NORMALLY STOCKED 4.75mm or 4.75mm or

6.3mm glass 6.3mm glass

channel channel

IRS 0021 IRS 0023 IRS 0150 * IRS 0158

4.75mm or

6.3mm glass

channel

IRS 0177 IRS 0186 IRS 0198 IRS 0199EP

IRS 0201EP IRS 0203 IRS 0205 IRS 0211

IRS 0232 IRS 0233 IRS 0246 IRS 0274

IRS 0327-6.3MMEP IRS 0332

IRS 0282 IRS 0322 IRS 0340 IRS 0341

IRS 0345 IRS 0393 IRS 0396 IRS 0422

4.75mm or

6.3mm glass

channel

IRS 0440 IRS 0441 IRS 0473-6.3MM IRS 0476

IRS 0484 IRS 0489EP IRS 0501 IRS 0504



THAN ONE ADDITION Cont'd


IRS 0526 IRS 0530 IRS 0539 IRS 0553


IRS 0580 IRS 0585EP IRS 0588 IRS 0600

IRS 0626 IRS 0629EP IRS 0645EP IRS 0646

4.75mm or

6.3mm glass

channel

IRS 0649 IRS 0692 IRS 0701 IRS 0713

IRS 0755 IRS 0779EP IRS 0780 IRS 0790

IRS 0799 IRS 0801N IRS 0808EP

IRS 0793 IRS 0839

IRS 0847 IRS 0814 IRS 0821 IRS 0854





IRS 0859 IRS 0878 IRS 0947EP

IRS 0983 IRS 0997 IRS 0897 IRS 1002

IRS 1007 IRS 1011 IRS 1019 IRS 1039N

IRS 1040 IRS 1042 IRS 1044 IRS 1046

IRS 1057 IRS 1072 IRS 1073

IRS 1053 IRS 1086 IRS 1088

IRS 1140EP IRS 1147N IRS 1162EP

IRS 1107N

IRS 1180N

IRS 1181 IRS 1170 IRS 1171WN IRS 1182N





IRS 1183N IRS 1189 IRS 1191

IRS 1197S IRS 1184 IRS 1203N IRS 1208

IRS 1209 IRS 1242N IRS 1243 IRS 1245

IRS 1254 IRS 1259 IRS 1267 IRS 1274

IRS 1275 IRS 1279 IRS 1294W IRS 1297

IRS 1303 IRS 1311N IRS 1359 IRS 1361

IRS 1371N IRS 1384N IRS 1387EP IRS 1406EP

IRS 1431 IRS 1435N IRS 1449EP

IRS 1450J IRS 1457 IRS 1437 IRS 1480EP


*




IRS 1499EP IRS 1506EP IRS 1509EP

IRS 1529EP IRS 1566 IRS 1510

IRS 1574EP IRS 1541EP IRS 1575EP IRS 1584EP



IRS 1613EP IRS 1628EPJ IRS 1632EP IRS 1627EP







IRS 1693EP IRS 1694

IRS 1687EP IRS 1704N IRS 1707EP IRS 1709EP


IRS 1751EP IRS 1758EP IRS 1759N



EXTRUSIONS Actual size ANGLE RUBBERS


IRS 0104 IRS 0136 IRS 0137N IRS 0138

IRS 0139EP IRS 0191 IRS 0214 IRS 0261

IRS 0275 IRS 0291EP IRS 0326EP IRS 0336EP

IRS 0424 IRS 0469 IRS 0693EP IRS 0700

IRS 0704 IRS 0822EP IRS 0830EP IRS 0888

IRS 0889 IRS 0906N IRS 0925EP IRS 0987

IRS 1018 IRS 1320

IRS 1321 IRS 1421

IRS 1472EP IRS 1525


EXTRUSIONS Actual size BLOCK TYPES


IRS 0242 IRS 0294 IRS 0329EP

IRS 0364 IRS 0412EP IRS 0458 IRS 0538

IRS 0614 IRS 0686 IRS 0702

IRS 0731 IRS 0739 IRS 0764

IRS 0774 IRS 0781 IRS 0838 IRS 0853

IRS 0860 IRS 0891 IRS 0896N IRS 0917

IRS 0966 IRS 1004 IRS 1024 IRS 1026N

IRS 1029 IRS 1035 IRS 1037 IRS 1047

IRS 1056 IRS 1068N IRS 1071 IRS 1085N


EXTRUSIONS Actual size BLOCK TYPES Cont'd


IRS 1103 IRS 1109 IRS 1115N IRS 1116N

IRS 1121N IRS 1128N IRS 1134

IRS 1127

IRS 1142 IRS 1188EP IRS 1217

IRS 1221SQ IRS 1229N

IRS 1230

IRS 1233 IRS 1250 IRS 1281

IRS 1302 IRS 1310 IRS 1323NT IRS 1355

IRS 1400EP IRS 1402N IRS 1411



EXTRUSIONS Actual size BLOCK TYPES Cont'd

* = NORMALLY STOCKED IRS 1521 IRS 1532EP IRS 1550EP IRS 1580

IRS 1624EP IRS 1706 IRS 1734NT

IRS 1634N

IRS 1719EP


EXTRUSIONS Actual size DOOR SEALS


IRS 0068 IRS 0069 IRS 0070 IRS 0071EP

IRS 0072 IRS 0073 IRS 0121EP IRS 0156

IRS 0230EP IRS 0252 IRS 0301


IRS 0328 IRS 0338 IRS 0343N IRS 0351EP

IRS 0494EP IRS 0541 IRS 0543

IRS 0472 IRS 0563 IRS 0608 IRS 0628

IRS 0651EP IRS 0661 IRS 0662

IRS 0683 IRS 0687N IRS 0696 IRS 0667


EXTRUSIONS Actual size DOOR SEALS Cont'd


IRS 0707 IRS 0722 IRS 0727

IRS 0729 IRS 0716 IRS 0742 IRS 0745EP

IRS 0748 IRS 0749EP IRS 0775N

IRS 0786 IRS 0810 IRS 0843EP IRS 0845

IRS 0848EP IRS 0864 IRS 0874EP IRS 0902


IRS 0939EP IRS 0949 IRS 0961 IRS 0973

IRS 0975 IRS 1030

IRS 1033N IRS 0979 IRS 0980 IRS 1048




IRS 1049 IRS 1050EP IRS 1051 IRS 1061

IRS 1081 IRS 1104 IRS 1112

IRS 1118 IRS 1084EP IRS 1136 IRS 1139

IRS 1141N IRS 1146W IRS 1157

IRS 1159EP IRS 1164 IRS 1150 IRS 1167

IRS 1192 IRS 1234 IRS 1247N

IRS 1246EP IRS 1263

IRS 1249 IRS 1257

IRS 1273 IRS 1272W




IRS 1288 IRS 1298EP

IRS 1301N IRS 1304N IRS 1305

IRS 1351N IRS 1368EP

IRS 1380 IRS 1353 IRS 1381N


IRS 1397N

IRS 1383 IRS 1403N IRS 1404N

IRS 1416S IRS 1405EP IRS 1420 IRS 1434EP





IRS 1466 IRS 1475EP


IRS 1446EP IRS 1491EP IRS 1494 IRS 1501EP

IRS 1504N IRS 1517N IRS 1527EP










IRS 1663 IRS 1664 IRS 1674EP

IRS 1684N IRS 1701EPJ * IRS 1702EP

IRS 1722EP * IRS 1723N IRS 1728EP

IRS 1668


IRS 1762EP


IRS 1777EP

IRS 1781 IRS 1767EP IRS 1787EP


EXTRUSIONS Actual size HOLLOW 'D'


IRS 0433 IRS 0481 IRS 0825EP

IRS 0861W IRS 0894EP IRS 0934EP

IRS 1124 IRS 1132N

IRS 1207NT IRS 1223NT * IRS 1133N

IRS 1336 IRS 1358NT

IRS 1390

IRS 1391 IRS 1415EP IRS 1460EP

IRS 1515EP

IRS 1459 * IRS 1519 IRS 1576EP


EXTRUSIONS Actual size HOLLOW 'D' Cont'd


IRS 1594NT IRS 1595NT IRS 1620

IRS 1703EPJ *



EXTRUSIONS Actual size IRREGULAR STRIPS


IRS 0103 IRS 0105 IRS 0106 IRS 0107

IRS 0108 IRS 0109 IRS 0110

IRS 0111 IRS 0112 IRS 0113 IRS 0125

IRS 0126 IRS 0144 IRS 0161

IRS 0178 IRS 0209 IRS 0217 IRS 0241

IRS 0262 IRS 0263EP IRS 0276

IRS 0285 IRS 0287EP IRS 0295

IRS 0305 IRS 0314EP IRS 0317

IRS 0321 IRS 0325 IRS 0378 IRS 0385


EXTRUSIONS Actual size IRREGULAR STRIPS Cont'd


IRS 0387 IRS 0389 IRS 0411

IRS 0418 IRS 0431 IRS 0442

IRS 0519 IRS 0540 IRS 0552

IRS 0609 IRS 0717 IRS 0792 IRS 0817

IRS 0866 IRS 0886 IRS 0931 IRS 0941

IRS 0948 IRS 0957 IRS 0993

IRS 1005 IRS 1017

IRS 1038 IRS 1075 IRS 1076

IRS 1255N


EXTRUSIONS Actual size IRREGULAR STRIPS Cont'd


IRS 1269N

IRS 1258

IRS 1277

IRS 1331W IRS 1386N




EXTRUSIONS Actual size MISCELLANEOUS


IRS 0127 IRS 0128 IRS 0140 IRS 0166

IRS 0185 IRS 0189 IRS 0192 IRS 0196

IRS 0236 IRS 0244 IRS 0256

IRS 0280 IRS 0283 IRS 0296 IRS 0300

IRS 0307 IRS 0318 IRS 0342 IRS 0349

IRS 0359EP IRS 0360 IRS 0368

IRS 0372 IRS 0401 IRS 0405 IRS 0414

IRS 0428 IRS 0432 IRS 0439 IRS 0452

IRS 0459 IRS 0463 IRS 0466 IRS 0479


EXTRUSIONS Actual size MISCELLANEOUS Cont'd


IRS 0480 IRS 0491 IRS 0495 IRS 0511

IRS 0516 IRS 0533 IRS 0551 IRS 0569

IRS 0573 IRS 0581 IRS 0587 IRS 0598

IRS 0603 IRS 0606 IRS 0611 IRS 0612

IRS 0613 IRS 0617 IRS 0620 IRS 0622

IRS 0624 IRS 0643 IRS 0647

IRS 0665 IRS 0637 IRS 0671 IRS 0672

IRS 0676 IRS 0681 IRS 0695

IRS 0706 IRS 0709 IRS 0705




IRS 0710 IRS 0711 IRS 0715 IRS 0726

IRS 0734 IRS 0741

IRS 0751 IRS 0740 IRS 0752 IRS 0743

IRS 0756 IRS 0757

IRS 0759 IRS 0807 IRS 0811EP

IRS 0812 IRS 0787

IRS 0855 IRS 0863 IRS 0844 IRS 0851

IRS 0868 IRS 0872 IRS 0893

IRS 0895 IRS 0877 IRS 0903




IRS 0907 IRS 0914 IRS 0919

IRS 0940 IRS 0945 IRS 0955 IRS 0933

IRS 0968 IRS 0969 IRS 0970

IRS 0960N IRS 0972 IRS 0981

IRS 0988 IRS 0990N IRS 0984

IRS 0992EP IRS 0996 IRS 1016 IRS 1023

IRS 1034 IRS 1055

IRS 1058 IRS 1045 IRS 1060

IRS 1062 IRS 1064 IRS 1065 IRS 1066




IRS 1069 IRS 1079N IRS 1080 IRS 1089W

IRS 1090 IRS 1091N IRS 1101 IRS 1108N

IRS 1113W IRS 1122N IRS 1123 IRS 1149

IRS 1144 IRS 1151 IRS 1152

IRS 1153 IRS 1154 IRS 1160 IRS 1169

IRS 1185W IRS 1190N IRS 1193 IRS 1202

IRS 1206 IRS 1236

IRS 1270N IRS 1271N

IRS 1285EP IRS 1309NT IRS 1240




IRS 1316N IRS 1324EP IRS 1327SBR

IRS 1332 IRS 1333 IRS 1335WFQ IRS 1341EP

IRS 1348WFQ IRS 1352EP IRS 1357N IRS 1366


IRS 1374EP IRS 1372 IRS 1376EP


IRS 1396EP IRS 1408EP IRS 1409EP IRS 1412WN

IRS 1419 IRS 1426N IRS 1436EP IRS 1438EP





IRS 1445EP * IRS 1447EP IRS 1468EP

IRS 1473 IRS 1474EP IRS 1476 IRS 1483EP

IRS 1497EP IRS 1500

IRS 1522 IRS 1505

IRS 1518EP IRS 1523WEP IRS 1549W

IRS 1552N IRS 1554EP IRS 1535N IRS 1559N



IRS 1582EP IRS 1583EP IRS 1589EP IRS 1591EPEP





IRS 1603EP IRS 1604NIRS IRS 1616EP IRS 1622N

IRS 1626N IRS 1629EPJ IRS 1631EP IRS 1633N



IRS 1659EP

IRS 1657EP

IRS 1679 IRS 1685EP IRS 1670

IRS 1675EPJ *

IRS 1695EP

IRS 1689EP

IRS 1725EP IRS 1715EP IR IW IRS 1710EP S IRS 1714EP




IRIRS 1735EP IRS 1739EP IRS 1744N IRS 1760N


IRS 1771N.FR IRS 1773EP IRS 1774EP

IRS 1779 IRS 1780 IRS 1782EP * IRS 1776EP


EXTRUSIONS Actual size PIPING DOUBLE




IRS 0438EP IRS 0454 IRS 0492 IRS 0515

IRS 0575 IRS 0616 IRS 0623 IRS 0678EP

IRS 0827 IRS 0890 IRS 1135N IRS 1148N

IRS 1166 IRS 1248N IRS 1276N IRS 1292EP

IRS 1300N IRS 1430N


EXTRUSIONS Actual size PIPING HOLLOW


IRS 0082 IRS 0083 IRS 0084 IRS 0085

IRS 0086 IRS 0087EP IRS 0088 IRS 0089

IRS 0090 IRS 0091 IRS 0092

IRS 0093 IRS 0094

IRS 0179EP * IRS 0259 IRS 0436

IRS 0379 IRS 0499N IRS 0507





EXTRUSIONS Actual size PIPING HOLLOW Cont'd


IRS 0708EP * IRS 0777EP IRS 0791EP


IRS 0887 IRS 0918

IRS 0936N IRS 0952 IRS 0927

IRS 0963N IRS 0994 IRS 1165N

IRS 1205N

IRS 1219

IRS 1282 IRS 1307N IRS 1346

IRS 1375 IRS 1395


EXTRUSIONS Actual size PIPING HOLLOW Cont'd



IRS 1399EP IRS 1511 *

IRS 1526N IRS 1534EP IRS 1567N IRS 1590N

IRS 1682EP


EXTRUSIONS Actual size PIPING SOLID



IRS 0100 IRS 0101 IRS 102 IRS 0181-25MM EP

IRS 0190 IRS 0225 IRS 0226 IRS 0229

IRS 0284 IRS 0292 IRS 0293 IRS 0331

IRS 0333 IRS 0344 IRS 0399 IRS 0437

IRS 0527 IRS 0571 IRS 0583 IRS 0601



IRS 0958 IRS 1025N IRS 1082


EXTRUSIONS Actual size PIPING SOLID Cont'd


IRS 1105N IRS 1131 IRS 1378EP IRS 1413EP

IRS 1533N IRS 1608


EXTRUSIONS Actual size REST RUBBERS


IRS 0114 IRS 0115 IRS 0116 IRS 0117EP

IRS 0118 IRS 0119 IRS 0120 IRS 0122

IRS 0124 IRS 0146 IRS 0147

IRS 0169 IRS 0173 IRS 0188

IRS 0195 IRS 0172 IRS 0204 IRS 0210

IRS 0212 IRS 0220 IRS 0228 IRS 0249EP

IRS 0269 IRS 0272 IRS 0279 IRS 0297

IRS 0308 IRS 0335

IRS 0347EP IRS 0348

IRS 0362 IRS 0366 IRS 0388 IRS 0392


EXTRUSIONS Actual size REST RUBBERS Cont'd


IRS 0406 IRS 0408 IRS 0450

IRS 0394 IRS 0468 IRS 0474 IRS 0520

IRS 0535 IRS 0567

IRS 0568 IRS 0574

IRS 0714 IRS 0732 IRS 0744

IRS 0804 IRS 0820 IRS 0796

IRS 0798 IRS 0832 IRS 0836 IRS 0842N

IRS 0862W

IRS 0898 IRS 0959


EXTRUSIONS Actual size REST RUBBERS Cont'd


IRS 1021

IRS 0991N IRS 1054

IRS 1137W IRS 1145

IRS 1220WN IRS 1265EP IRS 1266FQ IRS 1286

IRS 1291 IRS 1299 IRS 1322N

IRS 1337 IRS 1319 IRS 1354

IRS 1401EP IRS 1410N IRS 1422 IRS 1427N


IRS 1496 IRS 1498N


EXTRUSIONS Actual size ROOF RUBBERS AND

RUNNING BOARD TREADS


IRS 0132 IRS 0133 IRS 0134 IRS 0135

IRS 0141 IRS 0162 IRS 0163 IRS 0170

IRS 0208 IRS 0216EP IRS 0221 IRS 0222

IRS 0298 IRS 0310EP IRS 0311 IRS 0323EP

IRS 0355 IRS 0375 IRS 0453 IRS 0461

IRS 0513EP IRS 0529 IRS 0546 IRS 0595

IRS 0977 IRS 0985 IRS 0986 IRS 1070

IRS 1094 IRS 1630EPJ


EXTRUSIONS Actual size SLIT ROUNDS


IRS 0288 IRS 0558 IRS 0703N

IRS 0806


EXTRUSIONS Actual size 'T' SECTIONS AND WINDSCREEN

PATTERNS



IRS 0042 IRS 0043EP IRS 0044 IRS 0045

IRS 0046 IRS 0047 IRS 0048 IRS 0049

IRS 0050EP IRS 0051 IRS 0052 IRS 0053

IRS 0054 IRS 0055 IRS 0056 IRS 0057

IRS 0058 IRS 0059 IRS 0060

IRS 0061 IRS 0062 IRS 0063

IRS 0064 IRS 0065 IRS 0066EP IRS 0067

IRS 0074 IRS 0075 IRS 0130 IRS 0131



PATTERNS Cont'd


IRS 0148 IRS 0149 IRS 0151


IRS 0155 IRS 0157 IRS 0164 IRS 0165

IRS 0168 IRS 0174 IRS 0176

IRS 0182 IRS 0183 IRS 0175EP IRS 0184

IRS 0193 IRS 0194 IRS 0197 IRS 0200

IRS 0207 IRS 0213 IRS 0218 IRS 0219

IRS 0223 IRS 0224 IRS 0231N IRS 0235

IRS 0237 IRS 0238 IRS 0239 IRS 0240



PATTERNS Cont'd


IRS 0245EP IRS 0247 IRS 0248 IRS 0251

IRS 0253 IRS 0254 IRS 0260 IRS 0264

IRS 0265 IRS 0268 IRS 0273 IRS 0278

IRS 0286 IRS 0290 IRS 0302 IRS 0316

IRS 0324 IRS 0330 IRS 0357 IRS 0358

IRS 0361 IRS 0369 IRS 0370 IRS 0371

IRS 0374 IRS 0380EP IRS 0383 IRS 0384

IRS 0390 IRS 0398 IRS 0400 IRS 0402

IRS 0404 IRS 0409 IRS 0410 IRS 0413EP



PATTERNS Cont'd


IRS 0417 IRS 0426 IRS 0444 IRS 0446

IRS 0448 IRS 0456 IRS 0457 IRS 0460

IRS 0462 IRS 0465EP IRS 0467 IRS 0471

IRS 0482 IRS 0483 IRS 0488 IRS 0490

IRS 0493 IRS 0500 IRS 0514 IRS 0517EP

IRS 0518 IRS 0524 IRS 0531 IRS 0536

IRS 0542 IRS 0548 IRS 0554N IRS 0556

IRS 0561 IRS 0570 IRS 0582 IRS 0584

IRS 0586N IRS 0593 IRS 0599 IRS 0604



PATTERNS Cont'd


IRS 0607 IRS 0631 IRS 0635

IRS 0650EP IRS 0655 IRS 0656N IRS 0642

IRS 0663 IRS 0664 IRS 0674 IRS 0679EP

IRS 0680N IRS 0719 IRS 0723 IRS 0724

IRS 0725 IRS 0733N IRS 0737 IRS 0753N

IRS 0760 IRS 0765W IRS 0785 IRS 0788

IRS 0795 IRS 0800

IRS 0789EP

IRS 0813 IRS 0818

IRS 0835EP IRS 0846EP IRS 0849



PATTERNS Cont'd


IRS 0865 IRS 0870N IRS 0880N IRS 0899

IRS 0908 IRS 0912 IRS 0916 IRS 0926N

IRS 0930 IRS 0942N IRS 1012

IRS 1015N IRS 1028 IRS 0974

IRS 1052 IRS 1063N IRS 1067 IRS 1032

IRS 1092 IRS 1097N IRS 1110 IRS 1111EP

IRS 1199W IRS 1201EP IRS 1215 IRS 1224EP

IRS 1232 IRS 1253 IRS 1260




PATTERNS Cont'd


IRS 1284 IRS 1287 IRS 1290

IRS 1313 IRS 1293N

IRS 1328N IRS 1350

IRS 1312EP IRS 1356NT IRS 1362N

IRS 1432 IRS 1433

IRS 1393 IRS 1418 IRS 1444

IRS 1455J IRS 1456 IRS 1443 IRS 1458EP





PATTERNS Cont'd


IRS 1570EP IRS 1578EP IRS 1585N IRS 1597EP

IRS 1652 IRS 1656EPJ IRS 1660EP IRS 1672

IRS 1680EPJ IRS 1688N IRS 1696N

IRS 1673EP IRS 1697N IRS 1711EP IRS 1712N


IRS 1755EP IRS 1778 IRS 1784EP IRS 1785N.FR


EXTRUSIONS Actual size WEDGE RUBBERS


IRS 0143 IRS 0299 IRS 0304 IRS 0505

IRS 0547 * IRS 0605 IRS 0718 IRS 0746

IRS 0837 IRS 0869 IRS 0943 IRS 0971

IRS 0998 * IRS 1306 IRS 1503EP


EXTRUSIONS Actual size WRAP-OVER SECTIONS


IRS 0123 IRS 0142 IRS 0160 IRS 0407

IRS 0486 IRS 0487 IRS 0750 IRS 0881EP

IRS 0953 IRS 0956 IRS 0982 IRS 1059

IRS 1216NT IRS 1218PARA IRS 1429EP IRS 1440N


EXTRUSIONS Actual size WEATHERSTRIPS


Glass 3mm

Panel 0.8 - 1.6mm

Clearance between glass

and panel 6mm

Minimum bend radius 30mm

IRS 0768 W/S *

Glass 2mm

Panel 4mm


and panel 8mm

Minimum bend radius

76mm

IRS 1732EP W/S

Glass 3mm

Panel 3mm


and panel 7mm

Minimum bend radius

64mm

IRS 1295 W/S

Glass 3mm

Panel 5mm


and panel 8mm

Minimum bend radius

76mm

IRS 1730EP W/S

Glass 3mm Glass 3mm Glass 4.75mm Glass 4.75mm

Panel 10mm Panel 15mm Panel 0.8 - 1.2mm Panel 0.8 - 1.6mm

Clearance between glass Clearance between glass Clearance between glass Clearance between glass

and panel 10mm and panel 5mm and panel 8mm and panel 7mm

Minimum bend radius Minimum bend radius Minimum bend radius Minimum bend radius 126mm 76mm 76mm 58mm

IRS 1692 W/S * IRS 1770EP W/S * IRS 0776 W/S * IRS 0634 W/S *

Glass 4.75mm Glass 4.75mm Glass 4.75mm Glass 4.75mm Panel 1.2 - 1.6mm Panel 3mm Panel 2.6 - 3.25mm Panel 4.75mm Clearance between glass Clearance between glass Clearance between glass Clearance between glass and panel 6mm and panel 9mm and panel 7mm and panel 7mm

Minimum bend radius Minimum bend radius Minimum bend radius Minimum bend radius

32mm 102mm 64mm 102mm

IRS 0772 W/S * IRS 1251 W/S * IRS 0736 W/S * IRS 0773 W/S * Glass 4.75mm Glass 4.75mm Glass 4.75 - 6mm Glass 4.75 - 6mm

Panel 4.75mm Panel 6mm Panel 1.2 - 1.6mm Panel 3.1 - 3.5mm




IRS 1095 W/S * IRS 1204 W/S * IRS 0747 W/S * IRS 0769 W/S *


EXTRUSIONS Actual size WEATHERSTRIPS


Glass 6mm Glass 6mm Glass 6mm Glass 6mm

Panel 1.2 - 3.5mm


and panel 7mm

Minimum bend radius

64mm

IRS 0767 W/S *

Panel 2.4 - 3.6mm


and panel 8mm

Minimum bend radius

128mm

IRS 1195 W/S

Panel 2.4 - 3.6mm


and panel 8mm

Minimum bend radius

102mm

IRS 0770 W/S

Panel 2.6mm


and panel 8mm

Minimum bend radius

102mm

IRS 2000 W/S

Glass 6mm Glass 6mm Glass 6mm Glass 6mm

Panel 3mm Panel 3mm Panel 4mm Panel 6mm




IRS 1651 W/S * IRS 1655 W/S * IRS 1211 W/S * IRS 1186 W/S *

Glass 6mm

Panel 6mm


and panel 8mm

Minimum bend radius

102mm

IRS 1686 W/S *

Glass 6mm

Panel 9.5mm


and panel 12mm

Minimum bend radius

102mm

IRS 1196 W/S *

Glass 6mm

Panel 12.5mm


and panel 10mm

Minimum bend radius

160mm

IRS 1252 W/S *

Glass 4.75mm

Panel 1.6mm


and panel 7mm

Minimum bend radius

114mm

IRS 1100 W/S *

Glass 4.75mm

Panel 1.6mm


and panel 7mm

Minimum bend radius

75mm

IRS 1669 W/S *

Glass 4.75mm

Panel 3mm


and panel 8mm

Minimum bend radius

102mm

IRS 1289 W/S

Glass 7mm

Panel 1.6mm


and panel 8mm

Minimum bend radius

102mm

IRS 1724 W/S *

Glass 3mm

Panel 1.6mm


and panel 7mm

Minimum bend radius

64mm

IRS 1726 W/S *


EXTRUSIONS Actual size WEATHERSTRIPS Cont'd


Glass 4mm Glass 6mm

Panel 50mm Panel 50mm

IRS 1681 W/S * IRS 1653 W/S *

Glass 7mm

Panel 38mm

IRS 1256 W/S *

Glass 4mm

Panel 38mm

IRS 1671 W/S

FILLER STRIPS

SF1B * LF1B * Filler strips as LF1B are available for Weatherstrips in Black

Rubber, Black PVC/Nitrile, White PVC, Red PVC,

Aluminium PVC and Silver Chrome PVC.

SF1B and GP 241 OS are only available in Black.

(IRS 0768 W/S and IRS 0772 W/S take SF1B filler which is in

Black only.)


FITTING TOOL TO SUIT PVC CHROME FILLER (CLAYLASTIC TYPE)

Part No. B5406/1. Items shown below are supplied under this part number as

complete set.

Seperate parts can be supplied from the numbers shown below.

Synthetic Rubber Handle Hooks A5409 Roller Fillerstrip Eye A5407

A5424 Left and Right Hand A5408

Grub screw Glass Assembly Hooks

Large A5052 Small A5053 Tool Assembled ready for use

Allen Key A8370

FITTING TOOL TO SUIT RUBBER FILLER (CLAYTONRITE TYPE)

Part no. A8372. Items shown below are supplied under this part number as

complete set.

Seperate parts can be supplied from the numbers shown below.

Metal Handle A5029

Large Hook A5052

Small Hook A5053 Allen Key A8370

Post A5051 Large Eye A5026 Small Eye A5027

86 RUBBER EXTRUSIONS AND MOULDINGS

TITANFAST PVC

EDGING

Titanfast speeds production and saves money by eliminating edge-finishing processes on a

wide variety of quantity-produced items. It enhances appearance, covers exposed edges,

provides protection and absorbs impact. It grips permanently on edges, flanges and rims

of metal, glass fibre, plastic, wood and glass and eliminates the need for costly production

processes such as deburring, touch up painting or any mechanical operation normally used for

removing sharp edges.

Titanfast can be applied by unskilled labour in one quick, simple hand operation. It requires no

tacking, tools, glueing or riveting.

Tough, hard wearing it is built to last, it's colour stays fast, it washes repeatedly. It is shrink

resistant. Made of durable vinyl with a steel core. Will last just as long as the rest of your

product.

Subject to edge condition, the codes illustrated will fit flanges from 0.793mm to 6.5mm

thick. The single lip sections 101 and 251are designed to permit flush contact on the

exposed side.

It is easiest to apply Titanfast using the following method whether the materials is of even

thickness or not:-

Using one hand, roll Titanfast along the edge and at the same time press with the thumb of

the other hand at the point where the Titanfast meets the edge.

1. Titanfast is easily cut with a pair of tin snips

2. Titanfast will bend round a 19mm radius

3. It can be mitred round a tight angle corner simply by cutting out a V section with tin snips

4. The ends can be joined together by heating the touching ends with a hot piece of metal

MATERIAL SPECIFICATION

Vinyl Plastic

80 Durometer Hardness (Shore A 15 Second Reading)

Tensile Strength 2,200 PSI min.

Brittleness Temperature -20 Degrees F

Resistance to continuous heat 150 Degrees F

Segmented Metal Core

Cold rolled steel with special temper for more spring and rigidity 0.457mm thick

Sections shown actual size.

T/FAST 050 BLK or LT.GREY T/FAST 100 BLK or LT.GREY T/FAST 101 BLK or WHITE T/FAST 102 BLK

(flange 2.38mm - 4.762mm) (flange 1.587mm - 4.762mm) (flange 3.967mm - 4.762mm) (flange 3.967mm - 6mm)

T/FAST 100 B/W T/FAST 251 BLK

(flange 1.587mm - 4.762mm) (flange 0.8mm)

RUBBER EXTRUSIONS AND MOULDINGS

DRAUGHT EXCLUDERS COMPOSITE SELF GRIP TYPE

ACTUAL SIZE

Suitable for 1.6mm to 3mm panel Metal Re-inforced EPDM Rubber &

25 Metre Coi 25 Metre Coils 25 Metre Coils 25 Metre Coils

DX 70 DX 71 DX 72 DX 73

25 Metre Coils 25 Metre Coils 25 Metre Coils 60 Metre Coils

DX 75 (6mm Panel) DX 76 DX 77 DX 78


DX 79 (5mm Panel) DX 80 (PVC Channel) DX 81 (PVC Channel) DX 82


DX 84 DX 85 DX 86

DX 83 (Rubber Tail )

40 Metre Coils

DX 87 N

25 Metre Coils

DX 88 N

30 Metre Coils

DX 89

60 Metre Coils

DX 90


DRAUGHT EXCLUDERS COMPOSITE SELF GRIP TYPE

ACTUAL SIZE

Suitable for 1.6mm to 3mm panel EPDM Rubber Compound

25 Metre Coi 50 Metre Coils 50 Metre Coils 25 Metre Coils

DX 91 (PVC Channel) DX 92 (1.6mm DX 93 (black cloth cov- DX 94

50 Metre Coils 50 Metre Coils 50 Metre Coils

DX 95 (5 - 6mm panel) DX 96 DX 97


EXTRUSIONS Actual size SPONGE RUBBER SECTIONS


863mm Lengths 12.5mm, 16mm or Also available adhesive backed 25mm Base

SRS 001 * SRS 002 * SRS 003 * SRS 004 *

SRS 014 N *

SRS 006-A * SRS 007-A * SRS 008 EP * SRS 031 EP *

SRS 036 EP * SRS 052 * SRS 053 EP * SRS 071 *

SRS 091 N

SRS 083 N SRS 088 N

SRS 094 EP SRS 084 * SRS 096 N * SRS 097 EP

1.160m Lengths (Soft solid)

SRS 104 EP * SRS 105 EP * SRS 106 * SRS 107 EP

SRS 108 * SRS 109 * SRS 110 SRS 111

SRS 112 SRS 114 SRS 115 SRS 116


EXTRUSIONS Actual size SPONGE RUBBER SECTIONS


SRS 117 * SRS 118 SRS 120

SRS 119

SRS 121 N * SRS 122 SRS 124

SRS 123

SRS 125 * SRS 126 SRS 127 * SRS 129

Adhesive backed Adhesive backed Adhesive backed Adhesive backed 100 metre rolls only 50 metre rolls only 75 metre rolls only (White sponge)

100 metre rolls only

SRS 130 * SRS 131 SRS 132 * SRS 133

Adhesive backed Adhesive backed Adhesive backed

100 metre rolls only 100 metre rolls only 50 metre rolls only

SRS 134 SRS 135 SRS 136 SRS 137

1.3 metre lengths 2 metre lengths Adhesive backed

SRS 138 SRS 139 * SRS 140 SRS 141

Adhesive backed

SRS 142 SRS 143 * SRS 145

SRS 144

SRS 146 SRS 147


RUNNING BOARD

TREADS

Aluminium with

Rubber Filler

Aluminium width Rubber

RBT(A) 16mm RBT(F) 5



(Aluminium in 3.65m lengths only)

NEOPRENE NON-

INTERCELLULAR

SPONGE

With Adhesive Back (SAB/N)

Stock sizes (10m Coils)

6mm x 3mm 10mm x 3mm

12.5mm x 3mm 16mm x 3mm


10mm x 4.75mm 12.5mm x 4.75mm

25mm x 4.75mm 12.5mm x 6mm





25mm x 12.5mm

Other sizes are occasionally in stock

or can be supplied to order

on minimum production quantities.

EXTRUDED EPDM

SPONGE STRIP Skinned on 4 sides 3mm x 16mm 4.75mm x 12.5mm

(EXSS) 6mm x 12.5mm 6mm x 19mm


10mm x 19mm 12.5mm x 12.5mm

12.5mm x 16mm 12.5mm x 19mm

12.5mm x 25mm

NEOPRENE

SPONGE CORD (N.SP.CORD) 3mm Dia 4.75mm Dia

6mm Dia 8mm Dia

10mm Dia 13mm Dia

16mm Dia 19mm Dia

25mm Dia

NEOPRENE

SPONGE RUBBER

SHEET Standard sheet size 2 metre x 1 metre

(Supplied to special order)

3mm thick 4.75mm thick

6mm thick 12mm thick

SRM 01 MGB GT type outer sponge As AHH 9778

tailgate seal


EXPANDED

POLYETHYLENE

STRIP

Self Adhesive

(P.E.)

Closed cell and crossed linked foam plastic

with a fine and uniform cell structure.For

sealing indoors and outdoors, where proof

against dust, water, moisture is needed.

Resistant to oil, weathering most acids and

alkalis. Operating temperature range - 80

degrees C to + 80 degrees C, requires only

15-20% compression to give airtight sealing.

Sticks to any surface, rough or smooth, easy

to apply, no tools required, no fiddling with

drills or hammers. Dry and clean to use.

BUILDING Seals between plastic, g.r.p.

and concrete panels - weatherproofing - grout

sealing.

ELECTRONICS Gasketting for sealing

doors, cabinets etc.

RADIO/T.V. For protecting sensitive

parts from damage. Lamp gaskets (will not

tarnish)

ENGINEERING Dust seals and sealing

strips, sealing uneven surfaces.

PACKAGING Cushioning, strips, pads.

The closed cell structure has good cushioning

characteristics.

Already being used for the above and now

finding applications in Caravan and boat

building - Display - Medical equipment -

Automotive fields.

Colour dark grey.

Can be supplied in white to special order as

can non-stock sizes.

Standard length coils 10 metres.

Stocked in the following sizes:-










10mm x 6mm 12.5mm x 6mm



50mm x 6mm 12.5mm x 10mm





Other sizes are occasionally in stock or can be sup-

plied to order on minimum production

quantities.


SLIDING WINDOW

CHANNELS Single Track Rigid in 2 Metre Lengths

(One size fits 4.75mm and 6mm Glass)

Single Track Flexible in 20 Metre Coils

(One size fits 4.75mm and 6mm Glass)

(15mm outside width x 14mm outside height)

Flock Lined Rubber Channel (inside only)

Available in 2 sizes

V.C.R 4.75mm (4.75mm inside channel,

10mm outside width x 10mm outside height)

V.C.R 6mm (6mm inside channel,

11.5mm outside width x 10mm outside height)

Flocked Channel Small

(One size for 4.75mm and 6mm glass)

(12.5mm outside width x 10.5mm outside height)

Flocked Channel Large (One size for 4.75mm and 6mm glass)

(14mm outside width x 11mm outside height)

Flocked Channels for Series 3 Mini

front windows

Mini VCR L/H

Mini VCR R/H


DRAUGHT

EXCLUDERS ET 07 Worsted Black

ET 14 Worsted Red

ET 32 Moquette Black

ET 37 Moquette Red

SN 07 Worsted Black

SN 11 Worsted Red

SN 42 Moquette Black

SN 33 Moquette Red

Furflex Black

Furflex Red

9/16 Draught Strip (2 metre lengths)

(deep pile 6mm thick)

MSWS 1 Mini type Sliding Widow Seal

(1.1 metre lengths)

OWS 1 General Purpose Flocked

Outer Waist Strip

OWS 2 General Purpose Flocked

Outer Waist Strip. Semi Rigid

PVC Leg in 1 Metre Lengths

OWS 3 Triumph Spitfire as 612792

OWS 4 Triumph TR6 L/H as 850324

OWS 5 Triumph TR6 R/H as 850325


FELT STRIP NORMAL STOCK SIZES

(in 1.83m lengths) 19mm X 3mm

25mm X 1.6mm

25mm X 3mm

25mm X 6mm

32mm X 6mm

38mm X 1.6mm

38mm X 3mm

38mm X 4.75mm

50mm X 3mm

50mm X 6mm

52mm X 4.75mm

Other sizes can be supplied on minimum

orders of 50 lengths.

FLAT RUBBER NORMAL STOCK SIZES

GLAZING STRIP 1mm X 25mm

Plate finish. 1mm X 38mm

(Smooth) 1mm X 51mm

In 5 metre coils 1.6mm X 25mm 1.6mm X 38mm

1.6mm X 51mm

1.6mm X 63mm

1.6mm X 76mm

2.4mm X 25mm

2.4mm X 38mm

2.4mm X 51mm

3.2mm X 25mm

3.2mm X 38mm

3.2mm X 51mm

3.2mm X 63mm

3.2mm X 76mm

Other sizes can be supplied

to special order.

HOSE Radiator

1 metre lengths 13 mm i/d 44mm i/d

16mm i/d 48mm i/d

19mm i/d 51mm i/d

22mm i/d 54mm i/d

25mm i/d 57mm i/d

29mm i/d 60mm i/d

32mm i/d 64mm i/d

35mm i/d 70mm i/d

38mm i/d 76mm i/d

41mm i/d

HOSE Radiator

Blue Silicone

1 metre lengths

10mm i/d 38mm i/d 13mm i/d 41mm i/d

16mm i/d 45mm i/d

19mm i/d 48mm i/d

22mm i/d 51mm i/d

25mm i/d 54mm i/d

28mm i/d 57mm i/d

32mm i/d 64mm i/d

35mm i/d 70mm i/d


MARINE ITEMS WHITE 'D' FENDER

BASE DEPTH COIL LENGTH

22mm 16mm 9 or 18 metre

32mm 22mm 9 or 18 metre

38mm 32mm 12 metre

44mm 32mm 9 metre

51mm 35mm 9 metre

BLACK 'D' FENDER


38mm 32mm 18 metre

51mm 35mm 18 metre

DOUBLE 'D' FENDER

(Complete with stainless steel insert)


22mm 14mm 36 metre

32mm 16mm 30 metre

38mm 12mm 36 metre

44mm 19mm 30 metre

51mm 25mm 18 metre

61mm 32mm 12 metre

B 10 PVC FENDER

White with blue filler

38mm across base

B11 PVC FENDER

White with blue filler

25mm across base

BUMPER 2.44m or 3.04m long

73mm height x 82mm overall width

60mm base

FENDER 3.04m long

95mm height x 114mm base

Minimum order 5 lengths


MARINE ITEMS Cont'd JOINT COVER 'A'

25mm x 12.5mm external size

19mm x 6mm internal size

36 metre coils

JOINT COVER 'B'

41mm x 19mm external size


24 metre coils

EPS 3 PVC JOINT COVER



30 metre coils

EPS 10 PVC JOINT COVER


12.5mm internal width

30 metre coils

Mini tye No.420. 125mm long

(expandable link)

Mini tye No.421. 165mm long

(expandable link)

Mini guy No.422. 76mm long

(tent and tarpaulin eyelet fastener)


MATTING

Flat Fluted (BWF)

10 Metre Rolls

3mm thick x 1000mm wide


Fine Fluted (LFR)

10 Metre Rolls



4.75mm thick x 915mm wide



PLASTIC CHROME

TRIMS (actual size)

PT 01 Mini type wheel arch trim

(standard)

PT 02 Windscreen and weatherstrip

insert

PT 04 Grill trim

PT 06 Mini type wheel arch trim

(deluxe)

Also available in black

PT 08 Windscreen insert

Morris minor 1000 type


ACTUAL SIZE

PLASTIC CHROME

TRIMS continued

PT 10A Windscreen insert

Minx, Cortina, Viva

and Imp type


Triumph type

PT 13 Windcreen insert

Avenger type


Escort and Transit Type

PT 15 Grill trim

PT 16 Mini type gutter trim

in 5.1 metre lengths

available in black or chrome

BLACK PLASTIC OVER RIDER ORP 1 Austin type

SECTIONS

ORP 4 Rootes type


ACTUAL SIZE

BLACK PLASTIC

OVER RIDER ORP 5J Jaguar type

SECTIONS

continued

ORP 6 General purpose section

PLASTIC WING

PIPING 4.5mm bead x 9mm tail

4.75mm bead x 25mm tail

6mm bead x 38mm tail



(all above in black)

4mm bead x 8mm tail

(in white only)

EXTRUDED

BLACK PLASTIC

SECTIONS EPS 1 1.6mm inside channel

EPS 2 1.6mm inside channel

EPS 4 E Type Head-

lamp trim

EPS 5 3mm inside channel


ACTUAL SIZE

EXTRUDED

BLACK PLASTIC

SECTIONS

continued EPS 7 Leathergrain finish metal reinforced

EPS 8 Leathergrain finish

metal reinforced

EPS 9 Herringbone finish metal reinforced

EPS 12 /J E Type Fixed Head Coupe

Tail Gate Trim In 3.2m

Lengths

RT 01 Rubber safety edging fo

r

8mm panel

WAIST STRIP JW 1 E Type & XJ6 type flocked

outer waist strip

As BD 46440/1


BUFFERS

Rubber (Round)

Dia. Depth.

No.009 25mm

counter sink

No.010 19mm 12.5mm Centre hole with

counter sink

No.296 22mm 25mm Centre hole with

counter sink

No.296A 28mm 22mm Centre hole

No.342A Bonnet buffer

12.5mm Centre hole with

No.342A

( Fits 4.75mm dia hole in 1.6mm sheet)

No.431 35mm 25mm Centre hole

No.433J Jaguar type bonnet buffer No.433J

Tailboard Type

No.333 No.333 101mm long, 25mm wide,

38mm deep

No.418 292mm long, 44mm wide,

19mm deep

No.419 305mm long, 44mm wide,

25mm deep No.418

No.419

BUSHES &

MOUNTINGS No.414 1100 type silencer support

as A C A 9811


BUSHES &

MOUNTINGS

Cont'd

MM 2E Morris Minor type Engine

Mounting as AHA 5484

MM 3U Morris Minor type Upper Link Front Axle Bush

MM 4L Morris Minor type Lower

Arm Eyebolt Bush

M/M Morris Minor 1000 type

Gaiter Gear Lever Gaiter

RUBBER SHEET Commercial Natural and Neoprene in a

Plate (smooth) finish. 1220mm wide.

Stocked in the following thicknesses.

1.6mm 3mm

4.75mm 6mm

CANVAS

INSERTED

RUBBER SHEET

Commercial Natural rubber with

Canvas insertion in a Plate (smooth) finish.

1220mm wide. Stocked in the following

thicknesses.

1.6mm 3mm 4.75mm 6mm


BACKLIGHT

RUBBERS ESBL 6 Ford Escort MK1 type As HT 0066 BRS CF

(Endless Surround) ESBL 7 Morris Minor Early type As HT 0066 BRS PF

ESBL 8 Morris Minor As HT 0256 BRC

1000 Late type As HT 0370 BRS

ESBL 9 MGB.GT type

ESBL 15 Mini type

ESBL 16 Mini Van type

WINDSCREEN

RUBBERS (Endless Surround) ES 19 Austin A30/35 type

ES 22 Morris Minor Early type As HT 0066 CF

ES 23 Ford Cortina Mk1 type As HT 0159

ES 26 Hillman Imp type As HT 0185

ES 29 Triumph Herald type As HT 0091

ES 30 Austin A40 Farina type As HT 0022

ES 33 Morris Minor 1000 Late type As HT 0066 PF

ES 34 Ford Cortina Mk11 (modified) type As HT 0343

ES 35 Austin/Morris 1100 type As HT 0154

ES 36 Mini type As HT 0021

ES 37 Ford Escort Mk1 type As HT 0312

ES 40 Ford Anglia 105E type As HT 0040

ES 41 Hillman Avenger type As HT 0351

ES 43 Triumph 2000 type As HT 0201

ES 44 Triumph 1500 & Toledo type As HT 0253

ES 47 Ford Transit type As HT 0268

ES 50 Austin/Morris 1800 type As HT 0222

ES 53 Ford Escort MK11 As HT 0514

ES 54 Ford Capri type As HT 0335

ES 57 MGB Sports type As HT 0160

ES 64 Jaguar XJ6 type As HT 0324

ES 65 MGB GT type As HT 0256

ES 69 Ford Transit (with ears) type As HT 0268 M

ES 70 Morris Minor Split Screen type

ES 75 Ford Escort Mk111 (no filler) type As HT 0716

ES 76 Range Rover type As HT 0366

ES 86 Triumph Stag type As HT 0363

ES 87 Landrover 110 type As HT 0865

ES 88 Rover New Mini type

QUARTER LIGHT

RUBBERS (Endless Surround) FQLR 1 Morris Minor 1000 front (left) type (use IRS 1652

FQLR 2 Morris Minor 1000 front (right) type for upright)

QLR 1 Ford Escort Mk1 (right) type As HT 0312 BG L

QLR 2 Ford Escort Mk1 (left) type As HT 0312 BG R

QLR 3 Morris Minor 1000 rear (right) type

QLR 4 Morris Minor 1000 rear (left) type

QLR 5 Morris Minor 1000 Convertable

(left) type

QLR 6 Morris Minor 1000 Convertable

(right) type

QLR 7 Mini Fixed Rear type

DIRECT GLAZE

TRIMS WT 02 Ford Sierra type As HT 0924

WT 07/J Jaguar XJ6 series 3 outer type As HT 0679 B

WT 08/J Jaguar XJ6 series 3 inner type As HT 0679 A

WT 29 Ford Escort MK IV type

WT 30 V W Transporter type

WT 31 Citroen Berlingo type (Front Kit)


JAGUAR RUBBERS Windscreen and

Backlight Rubbers ES 64 XJ6 early type front As BD 38360

ESJ 100 Mk1 type front As BD 9537

ESJ 101 B/L Mk1 type rear As BD 9519

ESJ 102 B/L MkV11, V111 & 1X type rear As BD 5364

ESJ 103 XK 150 type front As BD 13129

ESJ 104 B/L XK 150 type rear As BD 14937

ESJ 107 B/L MkX type rear As BD 19839

ESJ 108 'E' type series 1 & 11 FHC front As BD 20499

ESJ 109 'E' type series 3 FHC 2+2 front As BD 38957

ESJ 110 'E' type series 3 V12 roadster front As BD 38958

ESJ 112 Mk11 saloon type front As BD 26888

ESJ 113 B/L Mk11 saloon type rear As BD 16992

ESJ 114 B/L XK 140 type rear As BD 6000

ESJ 115 B/L 'E' type series 1,11 & 111 FHC rear As BD 20309

ESJ 116 B/L XJ6 type rear As BD 38361

ESJ 117 XJ6 series 11 type front As BD 48848

ESJ 118 Mk1X type front As BD 12584

ESJ 119 MkX type front As BD 19833

ESJ 120 B/L 'S' type rear As BD 25297

ESJ 121 XJS type front As BD 44236

ESJ 122 B/L XJS type rear As BD 44393

ESJ 123 'E' type series 1 2+2 front As BD 28050

ESJ 124 B/L 'S' type rear for heated glass As BD 27155

ESJ 126 'E' type series11 2+2 rear As BD 35665

ESJ 127 B/L 'E' type hard top rear As BD 20687

Quarterlight Rubbers

JQLR 1 Mk11 type front (left) As BD 17048

JQLR 2 Mk11 type front (right) As BD 17049

JQLR 3 XJS type fixed front As BD 44773

JQLR 4 XJ6 series 1 type left hand As BD 31790

JQLR 5 XJ6 series 1 type right hand As BD 31789

Door Seals

JDS 01 Mk11 front (left) As BD 18267

JDS 02 Mk11 front (right) As BD 18268

JDS 03 Mk11 front (left) As BD 19155

JDS 04 Mk11 front (right) As BD 19156

JDS 05 Mk11 front (5 required for a set) As BD 18271

JDS 06 Mk11 rear (left) As BD 18266

JDS 07 Mk11 rear (right) As BD 18265

JDS 08 Mk11 rear (left) As BD 18269

JDS 09 Mk11 rear (right) As BD 18270

JDS 11 'E' type series 1 & 11 A post (right) As BD 25716

JDS 12 'E' type series 1 & 11 A post (left) As BD 25717

JDS 13 'E' type series 1 & 11 sill seal As BD 24789

fixed head coupe

JDS 14 'E' type series 1 & 11 B post (right) As BD 25898 fixed head coupe

JDS 15 'E' type series 1 & 11 B post (left) As BD 25899

fixed head coupe

JDS 16 'E' type series 111 sill seal 2+2 As BD 28447/1

fixed head

JDS 17 'E' type cant rail soft top As BD 21799


JAGUAR RUBBERS Cont'd Moulded Door Seals

JM 1 'E' type 2+2 A post (right) As BD 30301

JM 2 'E' type 2+2 A post (left) As BD 30302

JM 3 'E' type series 111 V12 A post (right) As BD 38233

JM 4 'E' type series 111 V12 A post (left) As BD 38232

JM 5 'E' type series 111 V12 B post As BD 30303

JM 6 XJ6 series 11 2 door coupe (left) As BD 44120

JM 7 XJ6 series 11 2 door coupe (right) As BD 44121

JM 8 XJ6 front door (right) As JRTC 2610

JM 9 XJ6 front door (left) As JRTC 2609

JM 10 XJ6 rear door (right) As JRTC 2612

JM 11 XJ6 rear dorr (left) As JRTC 2611

JM 12 XJ6 series 111 front door (right) As BEC 20212

JM 13 XJ6 series 111 front door (left) As BEC 20213

JM 14 XJS door seal (right & left) As BAC 6019

JM 16 XJ6 series 111 rear door (right) As BEC 20216

JM 17 XJ6 series 111 rear door (left) As BEC 20217

JM 18 XJ40 front door (right & left) As BEC 21300

JM 19 XJ40 rear door (right) As BEC 21304

JM 20 XJ40 rear door (left) As BEC 21305

Head Lamp Gasket

JHL 01 XK type


1

0

ACTUAL SIZE

CARAVAN SECTIONS

CRS 02 Double glazed opening

window section (with mastic)

for 25mm panel

20m coils only



for 27mm panel

20m coils only



for 30mm panel

20m coils only



for 30mm panel

20m coils only



for 27mm panel

20m coils only



for 25mm panel

20m coils only



for 34/35mm panel

20m coils only


ACTUAL SIZE

CARAVAN SECTIONS

continued CRS 04 White PVC insert

25mm wide

20m coils only

CRS 12 Grey PVC insert

23mm wide

20m coils only

CRS 15 White PVC insert

23mm wide

20m coils only

CRS 27 Grey PVC insert

25mm wide

20m coils only

CRS 13 PVC awning section

Black or Grey

CRS 16 Black PVC door seal

CRS 17 Beige PVC door

aperture section

with insert

CRS 19 White PVC wallboard

edge 3mm

CRS 21 Black rooflight seal

CRS 22 Light Grey Bailey type

awning rail section

CRS 22 Light Grey Bailey type

gutter trim

CRS 24 White ribbed PVC

waist section


ACTUAL SIZE

CARAVAN SECTIONS

continued CRS 25 Black motor caravan

door seal

CRS 26 Grey Bailey type

awning rail insert

CRS 28 Black awning rail trim

CRS 30 Thetford type

battery/locker seal

110 Herzim Strip (12mm Wide)

Available in Beige, Black, Cream,

Green, Grey, Maroon, Navy Blue,

Silver or White


Available in Black or White

112 Herzim Strip (13.5mm Wide)

Available in Black or White


Available in Black or Cream

114 Herzim Strip (14mm wide)

Available in Cream, Grey, Maroon or

Navy Blue

115 Herzim Strip (17.5mm Wide)

Available in White

EPS 11

Inner Side & Roof Joint Trim

Available in Cream

EPS 13

Door Frame Trim

Available in Black or Grey


ACTUAL SIZE

CARAVAN SECTIONS

continued CRS 01 Fixed Window Rubber

25mm Panel

SF1B Filler Strip for CRS 01

CRS 08 Fixed Window Rubber

27mm Panel

CRS 09 Fixed Window Rubber

30mm Panel

CRS 10 Filler for CRS 08 & CRS 09

IRS 1753EP Battery Box Seal

IRS 1787EP Battery Box Seal

CRS Corner (not to size) in

packs of 20 only


ACTUAL SIZE

CARAVAN SECTIONS

continued

CRS TOOL

For Fitting Filler in

Window Rubbers

110 TOOL

For rolling 110 filler

into channel

110 POST

as above but without

the handle

BART 1

For opening awning

channel

BRT 1

For fitting CRS 13,

CRS 22 & CRS 28

To use this tool hold with the point and hoop downwards. The trim is put

inside the

hoop facing down. Place over the aluminium profile with the lip of the

trim on the

inside (see sketch below). Hold the end of the section and push the tool

lip hook


Date post:	09-Mar-2018
Category:	Documents
Upload:	ngokhanh
View:	251 times
Download:	6 times

RUBBER - COH Baines Ltd · PDF fileHollow 'D' 48 Fender Sections 97 Irregular Strips Flat...

Documents