Rubber Products Catalog
visit us at warco.com
Fluorozone
INFINISIL and more!
New Products!Featuring
Proudly manufactured in the USA since 1910.
TM
America's choice for quality rubber.
Catalog effective: December 20, 2017
visit us at warco.com
Table of Contents
General Production Information
Specification Index
Sheet Rubber- Neoprene Sheet
- Nitrile (Buna-N) Sheet
- SBR Sheet
- Natural Rubber Sheet
- EPDM Sheet
- Skirtboard & Chute Lining
- AASHTO Bearing Pads
- Fluorozone® FKM & Viton™
- INFINISIL™ Silicone Sheet
- Butyl Sheet
- Cloth Inserted (CI) Sheet
- Thermoplastic Elastomer (TPE) Sheet
Rubber Mats & Matting- Corrugated Matting
- ASTM Switchboard Type 1 Matting
- KleenRite® Matting
- FingerTrac Entrance Mats
- Tredair Anti-Fatigue Comfort Mats
Rubber Extrusion- 60 Durometer Neoprene Tubing
- Neoprene Cable Jacket Tubing to MIL-R-6855
Utility Tarp Straps
Rubber Waterstop
Product Index
Terms & Conditions of Sale
Page:
. . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . . . . . . . 23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . .. . . . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . . . . . . . . . . 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
. . . . . . . . . . . . . . . . . . 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. . . . . . . . . . . . . . . . . . . 31
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
. . . . . . . . . . . . . . . . . . . . . 32
. . . . . . . 32
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
. . . . . . . . . . . . . . . . . . . . . 37
Rubber Products Catalog
Proudly manufactured in the USA since 1910America's choice for quality rubber.
Sales, Manufacturing & Distribution750 North Main Street
Orange, California 92868Tel: 714-532-3355
Fax: 714-532-2238Email: [email protected]
Sales, Manufacturing & Distribution16310 Highway 15 NorthRipley, Mississippi 38663
Tel: 800-245-8748Fax: 662-837-0132
Email: [email protected]
Corporate Office1337 Braden Court
Orange, California 92868Tel: 714-532-3355
Fax: 714-532-2238
West American Rubber Company, LLC
Biltrite Ripley Operations, LLC
3Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
GENERAL PRODUCTION INFORMATIONOur unique combination of equipment and talent allows WARCO BILTRITE to be thoroughly proficientin Large Volume, Short Run, and Custom Rubber production. Please contact our sales department for quotations on volume in excess of 1,000 lbs or on any Sheet, Matting, Extrusion, or Molded Rubber products not featured in our catalog. Additionally, we would be pleased to quote you on any custom molding, extrusion, sheet, mats, or matting products made to your requirements and specification.
For quotes, please contact customer service:
Toll Free: 800-245-8748 | Tel: 714-532-3355 | Fax: 714-532-2238 | Email: [email protected]
1/64” thick - 180 FT1/32” thick - 150 FT1/16” thick - 100 FT3/32” thick - 65 FT or 75 FT1/8” thick - 50 FT3/16” thick - 30 FT or 40 FT1/4” thick - 25 FT or 40 FT5/16” thick - 20 FT or 25 FT3/8” thick - 16.5 FT or 30 FT1/2” thick - 12.5 FT or 30 FT3/4” thick - 30 FT1” thick - 30 FT1 1/4” thick - 30 FT
Sheet Rubber Roll Length: Standard Roll approximate length ±10%
Custom FormulationsSheet Rubber SlittingFabric, Paper & Matte FinishTalc FreeStencillingColor MatchingTight TolerancesCustom Widths, Thicknessesand Lengths
.031” and thinner ± .010“
.032” to .061” ± .012“
.062” to .124” ± .016”
.125” to .186” ± .020”
.187” to .374” ± .031”
.375” to .500” ± .047”
.501” to .750” ± .094”
.751” and thicker ± 10%
Sheet RubberThickness Tolerance:(Standard RMA)
Closer tolerances and customthicknesses are available& can be quoted on request:
Tel: 714-532-3355
Toll-Free: 800-245-8748
Please call for details:Tel: 714-532-3355Toll-Free: 800-245-8748
Special Services and Optionsare Available:
1/64”1/32”1/16”3/32”1/8”3/16”1/4”5/16”3/8”1/2”5/8“3/4”7/8”1”
0.016”0.031”0.062”0.093”0.125”0.187”0.25”0.312”0.375”0.5”0.625“0.75”0.875”1.0”
0.397 mm0.793 mm1.588 mm2.381 mm3.175 mm4.763 mm6.35 mm7.938 mm9.525 mm12.7 mm15.875 mm19.05 mm22.225 mm25.4 mm
Fraction to Decimal toMillimeter Conversion:
Products may vary, please see productlisting for specific roll lengths. Per RMA, roll goods may contain multiple pieces.
All options may not be available on all products
Pricing: Sheet Rubber and Rubber Matting products are priced per foot ($/FT). Rubber Mats, Molded Rubber Sheets and Molded Bearing Pads are priced per each ($/EA). Extrusion is priced per foot ($/FT) or per 100 feet ($/CFT). Please call us for a quote.
Minimum Purchase:Regularly Stocked Sheet Item: 1 RollNon-Regularly Stocked Item: See Product for details or call us at 1-800-254-8748 for quoteCustom & Non-Catalog items: Please call for quote
Width Tolerance: Sheet Rubber comes trimmed or untrimmed. Trimmed Sheet Rubber is provided either 36”, 48”, or 72“ wide ± 1”. Untrimmed Sheet Rubber is provided either 36” usable, 48” usable, or 55“ usable and can measure approximately 3” in additional width. Custom widths are available, please call for details.
Sheet Rubber Finish: Unless otherwise noted, sheet rubber has a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.
Rubber Color: Unless otherwise noted, the standard color of our rubber is Black. Custom colors and color matching are available. Please call for details.
Test Reports: Short form test results, basic physicals, are available. Full test reports to particular specifications will be quoted on request. Certifications are sent with your order upon request at no charge.
Physical Properties: The minimum physical properties in this price list are obtained on ASTM test slabs and buttons.
Unless stated otherwise, products are manufactured to meet standard RMA Commercial guidelines. Per RMA, roll goods may contain multiple pieces.
ASTM and Product Physical Values: ASTM basic requirements for physical properties are based on values obtained from standard laboratory test specimens prepared and tested in accordance with the applicable ASTM test methods. Test results from specimens prepared from finished products may not duplicate values obtained from standard test specimens. Per ASTM D 2000, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance with Practice D 3183, a deviation to the extent of 10% on tensile strength and elongation values is permissible.
Payment Terms: Net 30 days. No Cash Discounts. New customer orders for shipment on open account are subject to credit approval.
Freight Terms: F.O.B. our warehouse location.
Price of material per foot ($/FT), pereach ($/EA) or per 100 feet ($/CFT)
WARCO BILTRITE Part Number
Regularly Stocked Items aredenoted with . Regularly StockedItems available for purchase bythe foot at warco.com/buy-the-footare denoted with
Price Page Key:
Durometer Hardness(Shore A ± 5)
1/32”
1/16”
3/32”
1/8”
75 Duro075F2124
3/16”
1/4”
Thic
kn
ess
(in
ch
es)
$29.9944228656
$54.5744228658
$76.4344228661
$107.9844228344
$163.6444228662
$219.9544228666
Width36”
MAGNIFY
75 Duro
$29.9944228656
$54.57
Please call or check warco.com for a quote.
4Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
ASTM Specification
ASTM C542ASTM E662ASTM D178-93ASTM D1330ASTM D2000 AAASTM D2000 BAASTM D2000 BCASTM D2000 CAASTM D2000 BFASTM D2000 BGASTM D2000 GEASTM D2000 HK
Military Specification
MIL-R-900MIL-G-1149MIL-R-2765MIL-R-3065 SBMIL-R-3065 SCMIL-R-3065 RSMIL-R-6855 Class 1MIL-R-6855 Class 2MIL-R-21252MIL-R-83248CMIL-R-83285MIL-STD-454
AMS
Aerospace MaterialSpecification
FDA
FDA Approved Ingredientsper 21 CFR 177.2600
Page
99301313-15, 18, 25, 30, 3115, 165 - 9171010 - 122322
Page
171212115, 6, 815, 16118, 321720, 221732
Page
9, 20, 22, 23
Page
7, 10, 11, 14, 15, 21, 22, 24, 29
NSF CompliantNSF 51 CompliantNSF 61 Compliant
A-A & ZZ-R
ZZ-R-765 2A & 2B(A-A-59588)
SAE J200
SAE J200 AASAE J200 BASAE J200 BCSAE J200 BF
Specialty Applications
HHP–151F - Cloth-InsertedFungus ResistantTransformer - General Electric A12C11E7Low Smoke, Low FlameHigh, Low TemperatureFabric Reinforced
AASHTO
AASHTO Grade 2AASHTO Grade 3
Transportation
Bio-Deisel CompatibleBoeing BSS 7239Bombardier SMP 800–CCaltrans 51–1.14 WaterstopsGeneral Motors (GMP.E/P.)Daimler Chrysler (MSAR)Ford (WSD-M2D)
Page
2828
Page
23
Page
1415, 165, 610
Page
25, 263212
92325, 26
Page18, 19 19
Page
1399332827-2929
Specification IndexWith two full laboratories and 3,000+ rubber compounds, WARCO BILTRITE is proficient at designing formulations to meet some of the world’s most stringent specifications. In addition to the specifications listed below, WARCO BILTRITE’s technical and development team is available to assist you with your specific requirements.
Please contact us for more information:
Tel: 714-532-3355 Toll-Free: 800-245-8748 Fax: 714-532-2238 Email: [email protected]
WARCO BILTRITE has the knowledge, talent and expertise to formulate rubber compounds to meet some of the world’s most stringent specifications. Contact us today to learn how WARCO BILTRITE’s technical and development team can help you meet your specification:
Tel: 714-532-3355 Toll-Free: 800-245-8748 Fax: 714-532-2238 Email: [email protected]
In Need of a Spec Not Listed Here?
5Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Made in USA | Virgin Polymer | No Regrind and No Recycled Materials
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
2.6 lb1/16 thru 2 36, 48, 72608806 500 200
UltimateElongation
typ. %
Estimated WeightPer Foot
(1/8” x 36”)
Tensiletyp. psi
–20ºF to +170ºF
TemperatureRange
BLACKOUT is a low cost neoprene blended sheet rubber designed for basic applications.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.6 lb
2.7 lb
2.7 lb
2.5 lb
2.8 lb
1/32 thru 2
1/32 thru 2
1/32 thru 2
1/16 thru 1
1/32 thru 2
36, 48, 72
36, 48, 72
36, 48, 72
36, 48
36, 48, 72
508015 & 8145
608016 & 8146
708017 & 8147
408014 & 8144
808018 & 8148
800†
900†
1000
800
1000
300
300
200
350
100
UltimateElongation
min. %
Estimated WeightPer Foot
(1/8” x 36”)
Tensilemin. psi
ASTM D 2000 1BC 609,SAE J200 1BC 609,MIL-R-3065 SC 609
ASTM D 2000 1BC 710,SAE J200 1BC 710,MIL-R-3065 SC 710
ASTM D 2000 1BC 508,SAE J200 1BC 508,MIL-R-3065 SC 508
ASTM D 2000 1BC 408,SAE J200 1BC 408,
MIL-R-3065 SC 408 Z1*
ASTM D 2000 1BC 810,SAE J200 1BC 810,MIL-R-3065 SC 810
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
TemperatureRange
*Z1 = Elongation: 350% min† = 1,000 psi Product is Available - Please contact Customer Service for details.
A smooth finish general purpose sheet with low temperature flexibility and oil resistance. Resists
rotting, checking, and cracking due to weather exposure. Designed to meet ASTM specifications for 1 BC Material.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Commercial Neoprene - Style 10
6Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
2.6 lb
2.7 lb
2.7 lb
2.8 lb
1/16 thru 1/4
1/16 thru 1/4
1/16 thru 1/4
1/16 thru 1/4
36, 72
36, 72
36
36, 72
508015
608016
708017
808018
800
900
1000
1000
300
300
200
100
ASTM D 2000 1BC 609,SAE J200 1BC 609,MIL R 3065 SC 609
ASTM D 2000 1BC 710,SAE J200 1BC 710,MIL R 3065 SC 710
ASTM D 2000 1BC 508,SAE J200 1BC 508,MIL R 3065 SC 508
ASTM D 2000 1BC 810,SAE J200 1BC 810,MIL R 3065 SC 810
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
UltimateElongation
min. %
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
*Supplied Talc-Free
Tensilemin. psi
A commercial blended neoprene sheet with a matte finish on one side. It is free of talc and release
solutions which make it excellent for applications that involve the use of pressure sensitive adhesives (PSA). Finish: Matte Finish on one side, Smooth on reverse side Color: Black Trim: TrimmedNon-Stock Minimum: Please call for quote
Matte Finish Neoprene - Style 12
TemperatureRange
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.46 lb
2.48 lb
2.52 lb
2.45 lb
2.75 lb
1/64 thru 1/2
1/64 thru 1/2
1/64 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
36, 48
36, 48
36, 48
36, 48
36, 48
50050E0357
60060E0264
70070E0321
40040E0423
80080E1109
1000
1000
1000
450
1000
300
300
200
300
100
ASTM D 2000M1BC 607
ASTM D 2000M1BC 707
ASTM D 2000M1BC 507
ASTM D 2000M1BC 403
2.2 lb1/32 thru 1/4 36, 4830030E1084
450 300ASTM D 2000
M1BC 303
ASTM D 2000M1BC 807
UltimateElongation
min. %
Tensilemin. psi
–30ºF to +200ºF
–30ºF to +200ºF
–30ºF to +200ºF
–30ºF to +200ºF
–30ºF to +200ºF
–30ºF to +200ºF
TemperatureRange
A premium grade blended sheet for applications requiring a higher percentage of
Neoprene and wider temperature range than standard commercial grade. This Neoprene formula has great resistance to weathering and moderate resistance to oil and gasoline.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Mid-Grade Neoprene - 5100 Series
WARCO BILTRITE has the knowledge, talent and expertise to formulate rubber compounds to meet some of the world’s most stringent specifications. Contact us today to learn how WARCO BILTRITE’s technical and development team can help you meet your specification:
Tel: 714-532-3355 Toll-Free: 800-245-8748 Fax: 714-532-2238 Email: [email protected]
Can’t Find the Spec You’re Looking For?
7Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %
Estimated WeightPer Foot
(1/8” x 36”)Specifications
2.43 lb
2.46 lb
2.54 lb
2.65 lb
2.77 lb
2.79 lb
2.81 lb
1/32 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/32 thru 1/4
36, 48
36, 48
36, 48
36, 48
36, 48
36, 48
36, 48
40040E0247
50050E0503
60060E0306
30030E0242
70070E0313
80080E0325
90090E0228
1000
1450
1450
450
1450
1450
1000
400
350
350
300
250
100
100
ASTM D 2000M1BC 303
ASTM D 2000M1BC 407
ASTM D 2000M1BC 510
ASTM D 2000M1BC 610
ASTM D 2000M1BC 710
ASTM D 2000M1BC 810
ASTM D 2000M1BC 907
Tensilemin. psi
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
TemperatureRange
This product is designed to give maximum performance and service,
resisting degradation from ozone and performing well in contact with oils and many chemicals. Premium Neoprene exhibits integrity over a wide temperature range as well as an outstanding resistance to damage caused by flexing and twisting.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Premium Neoprene (100% Neoprene)
UltimateElongation
min. %
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.98 lb
2.98 lb
60060E1062
55055E1053
1000
800
300
350
2.65 lb1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
40040E1058
600 400FDA ApprovedIngredients per 21 CFR 177.2600
FDA ApprovedIngredients per 21 CFR 177.2600
FDA ApprovedIngredients per21 CFR 177.2600
36, 48
36, 48
36, 48
Tensilemin. psi
This off-white Neoprene material contains FDA approved ingredients per 21 CFR 177.2600, an FDA regulation dealing with rubber articles articles intended for repeated food exposure.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
FDA Neoprene
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
TemperatureRange
---
---
---
---
---
36 x 3648 x 48
36 x 3648 x 48
36 x 3648 x 48
36 x 3648 x 48
36 x 3648 x 48
UltimateElongation
min. %
Thicknessinches
Sizes*inches
DurometerHardnessShore A ± 5
Specifications
5.9 lb
5.88 lb
60060E0915
50050E0914
700
500
250
300
5.4 lb1/8 thru 4
1/8 thru 4
1/8 thru 4
40040E0913
500 350
6.4 lb
6.15 lb
80080E0888
70070E0916
700
700
100
1501/8 thru 4
1/8 thru 4
Tensilemin. psi
Estimated WeightPer Foot
(5/16” x 36”)
Available in 36”x36” or 48”x48” - Longer lengths available, please call for quote. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote
Neoprene Performance Molded Sheets
–30ºF to +200ºF
---36 x 3648 x 48 5.5 lb1/8 thru 420
020E0241500 550 –30ºF to +200ºF
–30ºF to +200ºF
–30ºF to +200ºF
–30ºF to +200ºF
–30ºF to +200ºF
TemperatureRange
*For 30 FT lengths, please see Commercial Neoprene - Style 10.
8Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Estimated WeightPer Foot
(1/8” x 36”)
2.53 lb
2.69 lb
2.67 lb
2.45 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–60ºF to +220ºF
–50ºF to +220ºF
–60ºF to +220ºF
–50ºF to +220ºF
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
36, 48
36, 48
36, 48
36, 48
50050E0218
60060E0700
70070E0722
40040E0687
1450
1450
1450
1450
350
350
250
500
ASTM D 2000M2BC 610
A14 B14 C12 E034 F17
ASTM D 2000M2BC 710
A14 B14 C12 E034 F17
ASTM D 2000M2BC 510
A14 B14 C12 E034 F17
ASTM D 2000M2BC 410
A14 B14 C12 E034 F17
UltimateElongation
min. %
TemperatureRange
Tensilemin. psi
ASTM D 2000 M2BC (Neoprene)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Estimated WeightPer Foot
(1/8” x 36”)
2.45 lb
2.53 lb
2.69 lb
2.36 lb
2.67 lb
2.78 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
–40ºF to +220ºF
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/8 thru 4(slabs only)
1/64 thru 1/4
36, 48
36, 48
36, 48
36 x 3648 x 48
36, 48
50050E0785
60060E0700
70070E0711
40040E0687
80080E0702
1300
1500
1500
1200
1600
500
350
300
500
200
MIL-R-6855 Class 2,Grade 30, Type A&B
MIL-R-6855 Class 2,Grade 40, Type A&B
MIL-R-6855 Class 2,Grade 50, Type A&B
MIL-R-6855 Class 2,Grade 60, Type A&B
MIL-R-6855 Class 2,Grade 70, Type A&B
MIL-R-6855 Class 2,Grade 80, Type A&B
UltimateElongation
min. %
TemperatureRange
30030E0811
–40ºF to +220ºF1/64 thru 1/4 36, 48 1600 150
Tensilemin. psi
MIL-R-6855 Class 2 (A & B) - Oil Resistant NeopreneFinish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–60ºF to +220ºF
–60ºF to +220ºF
–60ºF to +220ºF
–60ºF to +220ºF
–60ºF to +220ºF
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/32 thru 1/4
1/64 thru 1/4
36, 48
36, 48
36, 48
36, 48
36, 48
50050E0727
60060E0724
70070E0722
40040E0726
80080E0701
1000
1500
1500
1000
1500
400
350
300
400
250
MIL-R-3065 SC310 F1
MIL-R-3065 SC410 F2
MIL-R-3065 SC515 F2
MIL-R-3065 SC615 F2
MIL-R-3065 SC715 F2
MIL-R-3065 SC815 F1
UltimateElongation
min. %
TemperatureRange
30030E0693
–60ºF to +220ºF1/64 thru 1/4
2.47 lb
2.61 lb
2.65 lb
2.39 lb
2.61 lb
2.61 lb36, 48 1500 100
Tensilemin. psi
MIL-R-3065 SC (Neoprene)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
9Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Estimated WeightPer Foot
(1/8” x 36”)
2.51 lb
2.45 lb
2.53 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–30ºF to +220ºF
–40ºF to +220ºF
1/64 thru 1/4
1/64 thru 1/4
36, 48
36, 48
50050E0705
50050E0785
1200
1500
300
350AMS 3205
Low Temperature(Neoprene)
AMS 3208Weather Resistant
(Neoprene)
AMS 3215Fuel Resistant
(Nitrile)
UltimateElongation
min. %
TemperatureRange
–30ºF to +220ºF1/64 thru 1/4 36, 4870070P0452
1500 250
Tensilemin. psi
Aerospace Material Specification (AMS)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
UltimateElongation
min. %
TemperatureRange
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.98 lb
2.98 lb
60060E0969
50**050E0970
1450
1450
350
350
2.44 lb1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
40**040E0737
1000 500
–30ºF to +220ºF
–40ºF to +220ºF
–50ºF to +220ºFASTM D 2000 M2BC 407
A14 B14 C12 F17 Z1*
ASTM D 2000 M2BC 510A14 B14 C12 F17 Z1*
ASTM D 2000 M2BC 610A14 B14 C12 Z1*
36
36
36
Tensilemin. psi
This specially formulated sheet product line prevents the growth of bacteria, fungi, and yeasts while avoiding obstacles that organic
biocides have posed in the past. This product can alleviate cleaning challenges in food-processing, medical, industrial, and other applications prone to microbial growth. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Anti-Microbial Neoprene
*Z1=Fungus resistance per MIL STD 810, Method 508**This material is also available with MIL-R-6855 Class 2 (Grade 40 & Grade 50), MIL STD 810E Method 508.4 specification.
Please contact Customer Service for a quote.
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Specifications
2.98 lb1/32 thru 1/4 36, 4865065E1344
1200 300
ASTM E 662, ASTM C 542 (ASTM C 1166 Procedure),Bombardier SMP 800-C*,
Boeing BSS 7239, UL 94VO**
Tensilemin. psi
*Certified by Bodycote Materials Testing Canada, Inc.**This material meets the flame requirement for UL 94VO, but is not UL listed.
Another example of the extensive capabilities of our laboratory. WARCO BILTRITE fire retardant elastomers offer significant benefits for gasketing and noise control inside railcars. The unique formulations of our highly engineered elastomers allow to safely resist the distribution of flame while emitting very low amounts of toxic smoke. This material is designed and formulated to meet the mass transit industry’s most demanding requirements and specifications for smoke generation (ASTM E 662), flame propogation (ASTM C 542), and toxic fume production (SMP 800-C). Rail transit, truck, bus or automotive, WARCO BILTRITE has the material to meet your requirements. Finish: Nylon Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Low Smoke, Low Flame, Low Toxicity Neoprene
–30ºF to +220ºF
TemperatureRange
10Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.6 lb
2.7 lb
2.7 lb
2.5 lb
2.8 lb
1/32 thru 1
1/32 thru 1
1/32 thru 1
1/16 thru 1
1/32 thru 1
36, 48
36, 48
36, 48
36, 48
36, 48
508225 & 8355
608226 & 8356
708227 & 8357
408224 & 8354
808228 & 8358
800
900
1000
800
1000
300
200
200
350
100
ASTM D 2000 1BF 609,SAE J200 1BF 609
ASTM D 2000 1BF 710,SAE J200 1BF 710
ASTM D 20001BF 508 Z1,*SAE J200 1BF 508 Z1*
ASTM D 2000 1BF 408 Z1*,SAE J200 1BF 408 Z1*
ASTM D 2000 1BF 810,SAE J200 1BF 810
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
*Z1 = Meets basic requirements for BF materials. Physical properties are as listed.
A smooth finish blended Nitrile sheet, which is offered in a range of five durometers (40 thru 80 durometer) in order to
perform in a wide variety of applications. Designed to meet ASTM specifications for 1BF material.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Commercial Nitrile - Style 35
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
–20ºF to +170ºF
TemperatureRange
36, 48
36, 48
36, 48
36, 48
36, 48
36, 48
*1/4” thick 90 durometer material available in slabs only.
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.32 lb
2.36 lb
2.48 lb
2.22 lb
2.59 lb
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
50050P0266
60060P0187
70070P0135
40040P0179
80080P0206
1000
1450
1450
1000
1450
350
300
250
450
125
ASTM D 2000M1BG 610
ASTM D 2000M1BG 710
ASTM D 2000M1BG 507
ASTM D 2000M1BG 407
ASTM D 2000M1BG 810
2.34 lb1/32 thru 1/4**90090P0270 1450 100
ASTM D 2000M1BG 910
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
This material is formulated to give excellent fuel and oil resistance and a longer service life in demanding applications.
Finish: Smooth Color: Black Trim: UnTrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Premium Nitrile
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
TemperatureRange
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %SpecificationsTensile
min. psi
1/16 thru 1/4
Estimated WeightPer Foot
(1/8” x 36”)
2.8 lb36, 48 1000 350ASTM D 2000 1BG 610,
FDA Approved Ingredientsper 21 CFR 177.2600
Style 37 is specially formulated for its whiteness, used in food,phamaceutical, and cosmetic processing. Made from FDA-approved ingredients
per 21CFR 177.2600, it is non-marking, non-allergenic, and safe to use for repeated food exposure. It has good oil and abrasion resistance and handles oily and greasy food products well. This product conforms with 3-A Sanitary 18-03 requirements for multiple use rubber Class III and Class IV. Finish: Smooth Color: White Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
FDA Nitrile - Style 37
608035
–25ºF to +180ºF
TemperatureRange
11Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
ThicknessInches
WidthInches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Specifications
2.71 lb
2.75 lb
2.95 lb
3.31 lb
1/32 thru 1/2
1/32 thru 1/2
1/32 thru 1/2
1/32 thru 1/4
36, 48
36, 48
36, 48
36, 48
55055P0146
65065P0364
80080P0100
45045P0152
1000
1000
450
450
250
200
100
300ASTM D 2000 M1BG 503 Z1 Z2 Z3,*
FDA approved ingredientsper 21 CFR 177.2600
ASTM D 2000 M1BG 607 Z1 Z2 Z3,*FDA approved ingredients
per 21 CFR 177.2600
ASTM D 2000 M1BG 707 Z1 Z2 Z3,*FDA approved ingredients
per 21 CFR 177.2600
ASTM D 2000 M1BG 803 Z1 Z2*,*FDA approved ingredients
per 21 CFR 177.2600
*Z1 = ± 5 Durometer, Z2 = FDA Ingredients per 21 CFR 177.2600, Z3 = White in Color **Z1 = FDA Ingredients per 21 CFR 177.2600, Z2 = White in Color
WARCO WHITE® is a registered trademark of West American Rubber Company, LLC. All rights reserved.
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
As its name implies, this material is specially formulated for its whiteness and is used extensively in food and pharmaceutical
environments. It is formulated with FDA-approved ingredients. It is non-toxic, non-marking and non-allergenic. It exhibits good abrasion resistance and handles oily and greasy food products well. All materials are made with FDA approved ingredients per 21 CFR 177.2600 and are intended for repeated food exposure. Finish: Smooth Color: White Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
WARCO White® FDA Nitrile
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
–30ºF to +220ºF
TemperatureRange
Estimated WeightPer Foot
(1/8” x 36”)
2.38 lb
2.42 lb
2.5 lb
2.15 lb
2.46 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
36, 48
36, 48
36, 48
36, 48
36, 48
50050P0472
60060P0473
70070P0474
80080P0475
1200
1300
1400
1100
1600
350
300
200
450
150
MIL-R-6855Class 1 Grade 40
MIL-R-6855Class 1 Grade 50
MIL-R-6855Class 1 Grade 60
MIL-R-6855Class 1 Grade 70
MIL-R-6855Class 1 Grade 80
UltimateElongation
min. %
TemperatureRange
40040P0471
Tensilemin. psi
MIL-R-6855 Class 1 (Fuel Resistant Nitrile)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Estimated WeightPer Foot
(1/8” x 36”)
2.22 lb
2.28 lb
2.35 lb
2.22 lb
2.45 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–60ºF to +220ºF
–60ºF to +220ºF
–60ºF to +220ºF
–60ºF to +220ºF
–40ºF to +220ºF
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
36, 48
36, 48
36, 48
36, 48
36, 48
50050P0468
60060P0461
70070P0444
40040P0477
80080P0475
1500
1500
1500
1000
1500
400
300
250
450
125
MIL-R-3065 SB410 F2
MIL-R-3065 SB515 F2
MIL-R-3065 SB615 F2
MIL-R-3065 SB715 F2
MIL-R-3065 SB815 F1
UltimateElongation
min. %
TemperatureRange
Tensilemin. psi
MIL-R-3065 SB (Nitrile)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
12Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Estimated WeightPer Foot
(1/8” x 36”)
2.22 lb
2.41 lb
2.41 lb
2.14 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–40ºF to +220ºF
–40ºF to +220ºF
–40ºF to +220ºF
–40ºF to +220ºF
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
36, 48
36, 48
36, 48
36, 48
50050P0683
60060P0450
70070P0627
40040P0626
1000
1450
1450
1000
350
300
250
450
ASTM D 2000M5BG 610
A14 B14 E014 E034 F17
ASTM D 2000M5BG 710
A14 B14 E014 E034 F17
ASTM D 2000M5BG 507
A14 B14 E014 E034 F17
ASTM D 2000M5BG 407
A14 B14 E014 E034 F17
UltimateElongation
min. %
TemperatureRange
Tensilemin. psi
ASTM D 2000 M5BG (Nitrile)
Estimated WeightPer Linear Foot
(1/8” x 36”)
2.13 lb
2.67 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–30ºF to +200ºF1/64 thru 1/4 36, 4850050E0189
1000 300MIL-G-1149 Type 1Class 1 Grade 50
(Neoprene)
UltimateElongation
min. %
TemperatureRange
–40ºF to +180ºF1/64 thru 1/4 36, 4850050A0172
1000 300MIL-G-1149 Type 1Class 2 Grade 50
(SBR)
2.32 lb–40ºF to +200ºF1/64 thru 1/4 36, 4850050P0447
1000 300MIL-G-1149 Type 1Class 5 Grade 50
(Nitrile)
Tensilemin. psi
MIL-G-1149Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
A Nitrile material designed specifically for the transformer oil market; helping to dissipate the likelihood of high electrostatic charging tendencies. These
highly engineered materials, in addition to meeting their respective ASTM D 2000 line call-outs, meet industry specification GE A12C11E7. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Thicknessinches
WidthInches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Specifications
2.36 lb
2.42 lb
1/32 thru 1/2
1/32 thru 1/2
36, 48
36, 4870070P0807
60060P0996
2000
2000
250
300
ASTM D 20005BG 620 A14 B14 E034;
General Electric A12C11E7
ASTM D 20005BG 720 A14 B14 E034;
General Electric A12C11E7
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Transformer Oil Nitrile
–20ºF to +250ºF
–30ºF to +250ºF
TemperatureRange
2.24 lb
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
SpecificationsUltimate
Elongationmin. %
TemperatureRange
Tensilemin. psi
–50ºF to +220ºF1/64 thru 1/4 36, 4840040P0445
1000 300 MIL-R-2765
MIL-R-2765 (Nitrile)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
13Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Features
2.39 lb
2.4 lb
1/32 thru 1/2
1/32 thru 1/2
36, 48
36, 4870070P1042
60060P0678
1500
1500
250
300Compatible with
Bio-Diesel B20 & B100
Compatible withBio-Diesel B20 & B100
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Specially designed and developed for use in environments where alternative fuels are present. Immersion test results indicate that these materials are compatible with alternative
fuels and are suitable for Bio-Diesel B20 (20% Bio-Diesel and 80% Petroleum Diesel) & Bio-Diesel B100 (100% Bio-Diesel).Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Bio-Diesel Nitrile
–30ºF to +220ºF
–30ºF to +220ºF
TemperatureRange
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
3.5 lb1/32 thru 1/4 36, 48, 72 758010 400 150
ASTM D 1330 Grade 2,ASTM D 2000 1AA 704 Z1
(Z1 = 75 ± 5 Durometer)
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
An economical red sheet for use in low pressure applications with no oil resistant requirements.
100 lb (half) rolls are also available. Please call for quote.Finish: Smooth (Also available in fabric finish) Color: Red (Also available in Black) Trim: TrimmedNon-Stock Minimum: Please call 1-800-245-8748 for quote
Red Rubber SBR - Style 20
–20ºF to +170ºF
TemperatureRange
UltimateElongation
%
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.7 lb1/16 thru 1/4758008
700 150 ASTM D 1330 Grade 136
Tensilepsi
Estimated WeightPer Foot
(1/8” x 36”)
Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Premium SBR - Style 22
–20ºF to +170ºF
TemperatureRange
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
3.0 lb1/16 thru 1/4 36, 4875075A0370
450 150ASTM D 2000M1AA 703 Z1
(Z1 = 75 ± 5 Durometer)
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
A premium grade SBR sheet with a high tensile strength. Well suited for the heating and plumbing trades. Has good aging, abrasion and tear
resistant properties. Refer to physical properties and ASTM data in assessing suitability for intended applications. Finish: Smooth Color: Red (Also available in Black) Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Specification Grade SBR
–40ºF to +180ºF
TemperatureRange
14Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
1.9 lb1/16 thru 1408031 & 8131
3000 600
ASTM D 2000 1AA 430,SAE J200 1AA 430,
FDA Approved Ingredientsper 21 CFR 177.2600
36, 48
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Excellent physical properties such as superior resilience, tensile, elongation, and abrasion resistance. Style 28 is a tan floating stock
and is produced entirely with FDA approved ingredients. It has good tear strength and is resistant to water most salts, mild acids and other chemicals. Not suited for environments involving ozone, strong acids, animal fats, oils, greases and most hydrocarbons. Non-marking and safe to use for repeated food exposure. Finish: Smooth Color: Tan Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Natural Rubber - Style 28
–20ºF to +140ºF
TemperatureRange
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.28 lb
2.07 lb
60060R0134
50050R0566
2500
2500
400
400
1.91 lb1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
40040R0246 2500 500
ASTM D 2000M1AA 417
ASTM D 2000M1AA 517
ASTM D 2000M1AA 617
36, 48
36, 48
36, 48
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
In addition to our Tan Natural Rubber - Style 28, our Black Natural Rubber exhibits extremely good resiliency and abrasion resistance. It has good tear
strength and is resistant to water, most salts and mild acids.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Black Natural Rubber
–40ºF to +160ºF
–40ºF to +160ºF
–40ºF to +160ºF
TemperatureRange
UltimateElongation*
min. %
ThicknessInches
WidthInches
DurometerHardnessShore A ± 5
Specifications
1.91 lb1/16 thru 1/240040R0149
2500 500ASTM D 2000 M1AA 417,
FDA Approved IngredientsPER 21CFR 177.2600
36, 48
Tensile*min. psi
Estimated WeightPer Foot
(1/8” x 36”)
Light Tan Pure Gum Floating stock has superior resilience, tensile, elongation and abrasion
resistance properties. Light Tan Natural Rubber is produced entirely with FDA approved ingredients per 21 CFR 177.2600. It has good tear strength and is resistant to water, most salts, mild acids, and many other chemicals. Not suited for environments involving ozone, strong acids, animal fats, oils, greases, and most hydrocarbons. Non-marking and safe to use for repeated food exposure.Finish: Smooth Color: Light Tan (Also available in Black) Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Pure Gum Floating Natural Rubber
–40ºF to +160ºF
TemperatureRange
15Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.19 lb1/64 thru 1/440040R0579
2500 500ASTM D 2000 M1AA 417,
FDA approved ingredientsper 21 CFR 177.2600
36, 48
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Superior resilience, tensile, elongation and abrasion resistance properties. It has good tear strength and is resistant to water, most salts, mild acids, and many other chemicals. Made with FDA approved ingredients per 21 CFR 177.2600. Finish: Smooth Color: Dark Tan Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
EZ Cut Non-Floating Gum Natural Rubber
–40ºF to +160ºF
TemperatureRange
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
1.91 lb1/64 thru 1/440040R0526
2500 500ASTM D 2000 M1AA 417,
FDA approved ingredientsper 21CFR 177.2600
36, 48
This material does not contain protein, which may cause alergic reactions.
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
This offering represents a synthetic polyisoprene which does not contain protein, which can cause allergic reactions in some cases. All materials are made with FDA approved ingredients per 21 CFR 177.2600.Finish: Smooth Color: Light Tan Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Protein Free (Synthetic Polyisoprene) Natural Rubber
–40ºF to +160ºF
TemperatureRange
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
1.93 lb1/8 thru 240040R0573
2500 500ASTM D 2000
M4AA 421 F17 G2136, 48
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Tuff-Stuff® Natural Rubber is an outstanding abrasion resistant material. Tuff-Stuff® delivers an optimum combination of tear,
abrasion, noise, and impact resistance resulting in reduced maintenance costs and longer service life from capital equipment. Tuff-Stuff® and Tuff-Stuff Plus® have each been specifically formulated and field proven to deliver the ultimate in durability and long life for high production mineral and aggregate facilities. Tear Resistance (Die C) = 200 PPI. Finish: Smooth Color: Red Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Tuff-Stuff® Natural Rubber
–40ºF to +160ºF
TemperatureRange
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
2.5 lb
2.6 lb
1/16 thru 1/4
1/16 thru 1/4
36, 48
36, 48
508058
608060
800
800
300
250
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
ASTM D 2000 3BA 508 C12,SAE J200 3BA 508 C12,MIL-R-3065 RS 508 C1
ASTM D 2000 3BA 608 C12,SAE J200 3BA 608 C12,MIL-R-3065 RS 608 C1
Specifications
Our most economical EPDM sheet offered. Intended to be used in less critical applications where temperatures are of an intermittent nature.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Commercial EPDM - Style 40
–40ºF to +212ºF
2.7 lb1/16 thru 1/4 36, 48708061 800 150
ASTM D 2000 3BA 708 C12,SAE J200 3BA 708 C12,MIL-R-3065 RS 708 C1
–40ºF to +212ºF
–40ºF to +212ºF
TemperatureRange
16Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.2 lb
2.2 lb
2.2 lb
2.2 lb
1/16 thru 1/4
1/16 thru 1/4
1/16 thru 1/4
1/16 thru 1/4
36, 48
36, 48
36, 48
36, 48508054
608053
708051
808052
1500
1500
1500
1500
350
250
150
400
ASTM D 2000 3BA 515A14 B13 C12 F17,SAE J200 3BA 515A14 B13 C12 F17,
MIL-R-3065 RS 515 C1 F1
ASTM D 2000 3BA 615A14 B13 C12 F17,SAE J200 3BA 615A14 B13 C12 F17,
MIL-R-3065 RS 615 C1 F1
ASTM D 2000 3BA 715A14 B13 C12 F17,SAE J200 3BA 715A14 B13 C12 F17,
MIL-R-3065 RS 715 C1 F1
ASTM D 2000 3BA 815A14 B13 C12 F17,SAE J200 3BA 815A14 B13 C12 F17,
MIL-R-3065 RS 815 C1 F1
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
High Grade EPDM is suited for applications where a high performance rating is required. It exhibits excellent resistance to heat, ozone and sunlight and has good temperature flexibility.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Premium EPDM - Style 45
–40ºF to +225ºF
–40ºF to +225ºF
–40ºF to +225ºF
–40ºF to +225ºF
TemperatureRange
ThicknessInches
WidthInches
DurometerHardnessShore A ± 5
Specifications
2.2 lb
2.22 lb
2.28 lb
2.03 lb
2.28 lb
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
36, 48
36, 48
36, 48
36, 48
36, 48
50050K0042
60060K0020
70070K0052
40040K0038
80080K0036
1015
1015
1015
1015
1450
300
300
200
300
150
ASTM D 2000M2BA 407 C12 F17
ASTM D 2000M2BA 507 C12 F17
ASTM D 2000M2BA 607 C12 F17
ASTM D 2000M2BA 707 C12 F17
ASTM D 2000M2BA 810 C12 F17
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
An EPDM best suited for applications where a high performance rating is required.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Premium EPDM
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
–50ºF to +220ºF
TemperatureRange
17Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.15 lb
2.2 lb
2.32 lb
2.1 lb
60060K0190
70070K0186
80080K0386
50050K0474
1450
1450
1450
1450
250
200
150
300
2.13 lb1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
40040K0175
1450 500 ASTM D 2000 M4CA 410A25 B35 C32 EA14 F19
ASTM D 2000 M4CA 510A25 B35 C32 EA14 F19
ASTM D 2000 M4CA 610A25 B35 C32 EA14 F19
ASTM D 2000 M4CA 710A25 B35 C32 EA14 F19
ASTM D 2000 M4CA 810A25 B35 C32 EA14 F19
36, 48
36, 48
36, 48
36, 48
36, 48
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Peroxide cured EPDM provides exceptional heat and aging stability and better compression set performance at higher temperatures. Most peroxides do not bloom and have better color control and stability.
Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Peroxide Cure EPDM
–60ºF to +300ºF
–60ºF to +300ºF
–60ºF to +300ºF
–60ºF to +300ºF
–60ºF to +300ºF
TemperatureRange
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
SpecificationsUltimate
Elongationmin. %
TemperatureRange
Tensilemin. psi
2.3 lb–40ºF to +220ºF1/64 thru 1/4 36, 4885085K0104
1600 70 MIL-R-21252
MIL-R-21252 (EPDM)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
MIL-R-83285 Grade 80 (EPDM)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
2.32 lb
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
SpecificationsUltimate
Elongationmin. %
TemperatureRange
Tensilemin. psi
–60ºF to +300ºF1/64 thru 1/4 36, 4880080K0386 2000 150 MIL-R-83285 Grade 80
Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
2.1 lb
Estimated WeightPer Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
SpecificationsUltimate
Elongationmin. %
TemperatureRange
Tensilemin. psi
–40ºF to +180ºF1/64 thru 1/4 36, 4845045K0438
1000 300 MIL-R-900
MIL-R-900 (EPDM)
18Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Estimated WeightPer Foot
(1/8” x 36”)
2.08 lb
2.14 lb
2.2 lb
2.1 lb
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
–60ºF to +300ºF
–60ºF to +300ºF
–60ºF to +300ºF
–60ºF to +300ºF
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
1/64 thru 1/4
36, 48
36, 48
36, 48
36, 48
50050K0336
60060K0190
70070K0186
40040K0175
1450
1450
1450
1450
400
350
250
400
ASTM D 2000M4AA 610
A13 B13 C12 F17
ASTM D 2000M4AA 710
A13 B13 C12 F17
ASTM D 2000M4AA 510
A13 B13 C12 F17
ASTM D 2000M4AA 407
A13 B13 C12 F17
UltimateElongation
min. %
TemperatureRange
Tensilemin. psi
ASTM D 2000 M4AA (EPDM)Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Features
3.3 lb1/8 thru 1658055
1500 300 Good abrasion andtear resistance
48
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
A commercial blended SBR compound used to control wear on surfaces impacted by solid materials and slurries.Good abrasion and tear resistance. Protects surfaces such as chutes, skirtboards, impact areas, and tumblers. This product is also available in extruded 50 FT straight lengths. May also be customized with beveled or chamfered edges. Please call for dimensions and a quote.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
Skirtboard & Chute Lining - Style 25
–20ºF to +170ºF
TemperatureRange
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Weight Per Foot
(1/2” x 36”)Specification
12.2 lb
16 lb
708067
608066
2250
2250
300
350
15.8 lb1/4 thru 1
1/4 thru 1
1/4 thru 1
508065
2250 400 AASHTO Grade 2*Neoprene
AASHTO Grade 2*Neoprene
AASHTO Grade 2*Neoprene
Tensilemin. psi
48
48
48
Available in lengths up to 30’. Longer lengths available, please call for quote. Also available in 36” x 36” and 48” x 48” slabs.Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
AASHTO Unsupported Neoprene Bearing Pads - Style 71
Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Association of State Highway and Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1.*Other AASHTO grades are available. Please contact customer service for details.
–40ºF to +220ºF
–40ºF to +220ºF
–40ºF to +220ºF
TemperatureRange
19Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
UltimateElongation
min. %
Thicknessinches
DurometerHardnessShore A ± 5
Weight Per Foot
(1/2” x 36”)Specification
12.2 lb
12 lb
708095
608093
2250
2250
300
400
11.8 lb1/4 thru 1
1/4 thru 1
1/4 thru 1
508091
2250 450AASHTO Grade 2*
Natural Rubber
AASHTO Grade 2*Natural Rubber
AASHTO Grade 2*Natural Rubber
Tensilemin. psi
Widthinches
48
48
48
Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Associa-tion of State Highway & Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1.*Other AASHTO grades are available. Please contact customer service for details.
Natural Rubber Unsupported AASHTO Bearing Pads are available in Grade 2 (other grades also available) in lengths up to 30 feet. Longer lengths available, please call for quote. Also available in 36” x 36” and 48” x 48” slabs. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote
AASHTO Unsupported Natural Rubber Bearing Pads - Style 72
–40ºF to +160ºF
–40ºF to +160ºF
–40ºF to +160ºF
TemperatureRange
UltimateElongation
min. %
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Estimated Weight Per Foot
(1/8” x 36”)Specification
2.60 lb
2.56 lb
70070E0056
60060E0054
2250
2250
300
350
2.54 lb1/8 thru 1/2
1/8 thru 1/2
1/8 thru 1/2
50050E0052
2250 400 AASHTO Grade 3Neoprene
AASHTO Grade 3Neoprene
AASHTO Grade 2Neoprene
Tensilemin. psi
36, 48
36, 48
36, 48
Also available in 36” x 36” and 48” x 48” slabs. Thickness Tolerance: 1.25” thick or less = +0.125“/-0 Width Tolerance: 36” width = +0.25”/-0, 48” width = +0.5”/-0 Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
AASHTO Unsupported Calendered Neoprene Bearing Pads
Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Association of State Highway and Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1.*Other AASHTO grades are available. Please contact customer service for details.
–40ºF to +220ºF
–40ºF to +220ºF
TemperatureRange
–40ºF to +220ºF
UltimateElongation
min. %
Thicknessinches
Sizeinches
DurometerHardnessShore A ± 5
Estimated Weight Per Foot
(1/2” x 36”)Specification
10.39 lb
10.31 lb
70070E0869
60060E0986
2250
2250
300
350
10.15 lb1/4 thru 1
1/4 thru 1
1/4 thru 1
50050E0979
2250 400 AASHTO Grade 3Neoprene
AASHTO Grade 3Neoprene
AASHTO Grade 2Neoprene
Tensilemin. psi
36x3648x48
36x3648x48
36x3648x48
Also available in 36” and 48” width rolls. Thickness Tolerance: 1.25” thick or less = +0.125“/-0 Width Tolerance: 36” width = +0.25”/-0, 48” width = +0.5”/-0 Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote
AASHTO Unsupported Molded Neoprene Bearing Pads
Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Association of State Highway and Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1.*Other AASHTO grades are available. Please contact customer service for details.
–40ºF to +220ºF
–40ºF to +220ºF
–40ºF to +220ºF
TemperatureRange
20Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Thicknessinches
SheetWidthinches
DurometerHardnessShore A ± 5
3.68 lb 060F02071/64 - 1/4 36, 4860 800 1200
Tensile (psi) Estimated WeightPer Foot
(1/8” x 36”)
–20ºF to +400ºF
TemperatureRange Compound
minimum typical
250 350
3.65 lb 075F02331/64 - 1/4 36, 4870 900 1200 –20ºF to +400ºF200 300
3.65 lb 075F02051/64 - 1/4 36, 4875 1000 1250 –20ºF to +400ºF200 300
UltimateElongation (%)
minimum typical
Fluorozone® Premium Performance FKM sheet is made with 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer. With 66% Fluorine content, Fluorozone® Premium Performance FKM is comparable to A-type Fluoroelastomer products. This material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber.
Finish: Smooth (Nylon finish available, upcharge will apply) Color: Black Trim: Untrimmed
FluorozonePremium Performance FKM
Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.
®
Thicknessinches
SheetWidthinches
DurometerHardnessShore A ± 5
4.40 lb 075F02171/64 - 1/4 36, 4875 1000 1200
Tensile (psi) Estimated WeightPer Foot
(1/8” x 36”)
–20ºF to +400ºF
TemperatureRange Compound
minimum typical
175 200
UltimateElongation (%)
minimum typical
Fluorozone® Brown Premium Performance FKM sheet is made with 100% virgin USA-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). Fluorozone® Brown Premium Performance FKM exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber.
Finish: Smooth (Nylon finish available, upcharge will apply) Color: Brown Trim: Untrimmed
Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.
®FluorozoneBrown Premium Performance FKM
Fluorozone® Mil-Spec Performance FKM sheet is formulated to meet the AMS 3216 specification (supercedes MIL-R-83248) and is made with 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). Fluorozone Mil-Spec Performance FKM is our second offering in the Fluorozone® FKM product family. This material exhibits a higher temperature range and increased tensile strength compared to our Fluorozone Premium Performance grade. Fluorozone has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber and has resistance to a broad range of oils, fuels, lubricants and most mineral acids.
Finish: Smooth (Nylon finish available, upcharge will apply) Color: Black Trim: Untrimmed
FluorozoneMil-Spec Performance FKM
Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.
®
Thicknessinches
SheetWidthinches
DurometerHardnessShore A ± 5
3.55 lbAMS 3216G,
MIL-R-83248C Type II Class 11/32 - 1/4 36, 4875075F0212
1600 1850
Tensile (psi)Estimated
WeightPer Foot
(1/8” x 36”)
–20ºF to +500ºF
TemperatureRange Specifications
minimum typical
125 150
UltimateElongation (%)
minimum typical
21Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Formulated for food and lab applications where FDA compliance is required. Made from FDA-approved ingredients per 21CFR 177.2600 including 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). With 66% Fluorine content, this material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers.
Finish: Smooth (Nylon finish available, upcharge will apply) Color: Black Trim: Untrimmed
FluorozoneFDA Performance FKM
Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.
®
Thicknessinches
SheetWidthinches
DurometerHardnessShore A ± 5
3.76 lb FDA 21 CFR 177.2600
FDA 21 CFR 177.2600
1/32 - 1/4 36, 4860060F0221
800 1200
Tensile (psi)Estimated
WeightPer Foot
(1/8” x 36”)
–20ºF to +450ºF
TemperatureRange Compliance
minimum typical
200 250
3.92 lb1/32 - 1/4 36, 4875075F0223
800 1300 –20ºF to +450ºF150 200
UltimateElongation (%)
minimum typical
Features
66% Fluorine,Cinnamon Scented,
100% Viton® FKM
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %
3.7 lb1/32 thru 1/4 36, 4870070F0074
800 175
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
This material exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set attributes even at temperatures that can embrittle other non-fluorinated elastomers. It also exhibits good resistance to atmospheric oxidation, sun, and weather, and has excellent resistance to fungus and mold. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability.
Commercial Viton® A
–20ºF to +400ºF
3.7 lb1/32 thru 1/4 36, 4875075F2124
1000 175 –20ºF to +400ºF
TemperatureRange
Features
100% DuPont Viton® FKM
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %
4.4 lb1/32 thru 1/4 36, 4875075F0123
1000 175
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
This material exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set attributes even at temperatures that can embrittle other non-fluorinated elastomers. It also exhibits good resistance to atmospheric oxidation, sun, and weather, and has excellent resistance to fungus and mold. Finish: Smooth Color: Brown Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.
Brown Commercial Viton® A
–20ºF to +400ºF
TemperatureRange
Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC.
22Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC.
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Specifications
3.79 lb
3.58 lb
1/16 - 1/4
1/32 - 1/4
36, 48
36, 4870070F0052
60060F0053
1000
1000
175
200 ASTM D 2000M1HK 607
ASTM D 2000M1HK 707
3.61 lb1/32 - 1/4 36, 4880080F0054
1000 150 ASTM D 2000M1HK 807
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
A broad range of resistance to oils, fuels, lubricants and most mineral acids. Very good resistance to many aliphatic hydrocarbon fluids that
act as solvents for many other rubbers. Exceptionally good compression set resistance; even at temperatures that can degradate other non-fluorinated elastomers. Good resistance to atmospheric oxidation, sun, and weather. Excellent resistance to fungus and mold. 66% fluorine content.Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.
Premium Viton® A
–20ºF to +450ºF
–20ºF to +450ºF
–20ºF to +450ºF
TemperatureRange
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Specifications
3.63 lb1/64 thru 1/4 36, 4875075F0081
1600 125AMS 3216G,
MIL-R-83248C Type II Class 1
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Mil-Spec Viton® A
–20ºF to +500ºF
TemperatureRange
A broad range of resistance to oils, fuels, lubricants and most mineral acids. Excellent resistance to hot greases found in engines and compressors and excellent resistance to a wide range of concentrated acids. Made with 66% fluorine content. This material is approved under the Government’s Q.P.L. 83248-3.Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Specifications
3.75 lb1/32 - 1/4 36, 4870070F0195
1000 175ASTM D 2000
M1HK 707
3.81 lb1/32 - 1/4 36, 4875075F0165
1000 150ASTM D 2000M1HK 807 Z*
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Viton® B has greater res istance and retains flexibility better after dry heat aging than Viton® A. It is recommended for applications requiring maximum retention of elastic
properties combined with good mechanical properties. Viton® B offers superior resistance to both diluted and concentrated aggressive acids. Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum:Please call for minimums and availability.
Viton® B
–20ºF to +450ºF
–20ºF to +450ºF
TemperatureRange
*Z = 75 ± 5 Durometer
ThicknessInches
WidthInches
DurometerHardnessShore A ± 5
UltimateElongation
min. %Specifications
3.63 lb1/64 thru 1/4 36, 4875075F0151
700 150FDA approvedingredients per21 CFR 177.2600
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Perfect for food and lab applications where FDA compliance is required. This material has good chemical resistance, high temperature properties and is
resistant to corrosives. Safe to use for repeated food exposure.Finish: Smooth Color: Black Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.
FDA Viton® A
–20ºF to +450ºF
TemperatureRange
23Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Tensiletypical psi
Features
2.46 lb
2.63 lb
2.59 lb
2.36 lb
--- lb
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
36, 48
36, 48
36, 48
36, 48
36, 48
50050S0843
60060S0844
70070S0845
40040S0842
80080S0846
750
800
800
750
800
400
350
300
450
200
High and LowTemperature Resistance,
Excellent WeatheringResistance
UltimateElongation
min. %
WARCO BILTRITE’s commercial grade silicone sheet is designed to be used in applications where physical properties are not critical but extreme temperature (high or low) resistance is still needed. This material also provides excellent UV and ozone resistance. It is non-toxic, chemically inert and fungus resistant. Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.
Estimated WeightPer Foot
(1/8” x 36”)
–80ºF to +450ºF
–80ºF to +450ºF
–80ºF to +450ºF
–80ºF to +450ºF
–80ºF to +450ºF
TemperatureRange
Performance Silicone
T M
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Tensile (psi) Speci�cations
2.42 lb
2.57 lb
2.59 lb
2.36 lb
A-A-59588 2A & 2B Grade 50,AMS 3302, ASTM D2000 M1GE 505
A-A-59588 2A & 2B Grade 60,AMS 3303, ASTM D2000 M1GE 605
A-A-59588 2A & 2B Grade 70,AMS 3304, ASTM D2000 M1GE 705
A-A-59588 2A & 2B Grade 40,AMS 3301, ASTM D2000 M1GE 405
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
36, 48
36, 48
36, 48
36, 48
50050S0562
60060S0563
70070S0564
40040S0561
820
820
900
800
725
725
725
725
UltimateElongation (%)
INFINISIL™ Spec-Grade Performance Silicone is designed to be used in applications where higher physical properties and lower compression set are required. It is resistant to extreme high and low temperature ranges and is proven to be an excellent gasketing material. Meets the A-A-59588 speci�cation which supercedes ZZ-R-765.Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.
Estimated WeightPer Foot
(1/8” x 36”)
–80ºF to +450ºF
–80ºF to +450ºF
–80ºF to +450ºF
–80ºF to +450ºF
TemperatureRange
Spec-Grade Performance Silicone
T M
min. typical
300
320
280
400
250
200
150
300
min. typical
24Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
This Silicone material is designed for applications where food or consumables are present. FDA Silicone is low volatile, peroxide-free and does not discolor over time. The ingredients used to make this product are listed in CFR 177.2600, an FDA regulation dealing with rubber articles that are intended for repeated food exposure. This material is ozone and UV resistant.Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: UntrimmedNon-Stock Minimum: Please call for minimums and availability.
FDA Performance Silicone
T M
36, 48
36, 48
36, 48
36, 48
36, 48
Thicknessinches
DurometerHardnessShore A ± 5
Tensilemin. psi
Specifications
2.54 lb
2.67 lb
2.75 lb
2.18 lb
2.77 lb
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
50050S1091
60060S1092
70070S1093
40040S1090
80080S1094
450
450
450
450
450
250
200
150
300
100
FDA approved ingredients
per 21 CFR 177.2600
UltimateElongation
min. %
Widthinches
Estimated WeightPer Foot
(1/8” x 36”)
–80ºF to +400ºF
–80ºF to +400ºF
–80ºF to +400ºF
–80ºF to +400ºF
–80ºF to +400ºF
TemperatureRange
25Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Butyl (also known as Isobutylene-isoprene) is impermeable to air and used in many applications requiring airtight rubber. Butyl rubber has outstanding resistance to gases, vapors, heat aging, oxygen, ozone, sunlight, abrasion and
tearing. It has excellent resistance to alkalis and acids and is good for electrical insulation.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Tensilemin. psi
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.2 lb
2.24 lb
2.3 lb
2.09 lb
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
1/32 thru 1/4
36, 48
36, 48
36, 48
36, 48
50050T0055
60060T0056
70070T0080
40040T0083
1000
1000
1450
1000
400
300
250
400
ASTM D 2000M1AA 607
ASTM D 2000M1AA 710
ASTM D 2000M1AA 507
ASTM D 2000M1AA 407
UltimateElongation
min. %
Estimated WeightPer Foot
(1/8” x 36”)
Butyl
–40ºF to +180ºF
–40ºF to +180ºF
–40ºF to +180ºF
–40ºF to +180ºF
TemperatureRange
UltimateElongation*
min. %
Cotton1/16 thru 1/4 36, 4870*070E1162
800* 150*
Thicknessinches
Widthinches
DurometerHardness*Shore A ± 5
FabricType
Tensile*min. psi
*Physicals are based on rubber only (no insert).Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet.This construction includes one Cotton ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies
Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. This construction includes one ply of cotton fabric for each 1/16” thickness.Temperature Range: –30ºF to +200ºF Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: CottonNon-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Features
Cotton-InsertedSheet
Cloth-Inserted Neoprene - Regular Cotton Ply
Estimated WeightPer Foot
(1/8” x 36”)
2.41 lb
UltimateElongation*
min. %
Polyester4.0 oz1/16 thru 1/4 36, 4870*070E1028
800* 150*
Thicknessinches
Widthinches
DurometerHardness*Shore A ± 5
FabricType
FabricWeight
Tensile*min. psi
*Physicals are based on rubber only (no insert).Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet.This construction includes one ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies
Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. This construction includes one ply of polyester fabric for each 1/16” thickness.Temperature Range: –30ºF to +200ºF Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: PolyesterNon-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Features
Polyester-InsertedSheet
Cloth-Inserted Neoprene - Regular Polyester Ply
Estimated WeightPer Foot
(1/8” x 36”)
2.34 lb
26Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
UltimateElongation*
min. %
Cotton1/16 thru 1/4 36, 4865*065A0447
1300* 300*
Thicknessinches
Widthinches
DurometerHardness*Shore A ± 5
FabricType
–30ºF to +170ºF*
TemperatureRange*
Tensile*min. psi
*Physicals are based on rubber only (no insert).This construction includes one ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies
Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, low pressure steam, and hydraulic services. An SBR compound reinforced with a close weave cotton fabric. This construction includes one ply of cotton fabric for each 1/16” thickness.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Features
Cotton-InsertedSheet
Cloth-Inserted SBR - Regular Cotton Ply
Estimated WeightPer Foot
(1/8” x 36”)
2.75 lb
UltimateElongation*
min. %
4.0 ozPolyester1/16 thru 1/4 36, 4865*
065A04461300* 300*
Thicknessinches
Widthinches
DurometerHardness*Shore A ± 5
FabricType
Tensile*min. psi
*Physicals are based on rubber only (no insert).This construction includes one ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies
Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, low pressure steam, and hydraulic services. An SBR compound reinforced with a close weave polyester. This construction includes one ply of polyester fabric for each 1/16” thickness.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Features
Polyester-InsertedSheet
Cloth-Inserted SBR - Regular Polyester Ply
Estimated WeightPer Foot
(1/8” x 36”)
2.74 lb–30ºF to +170ºF*
TemperatureRange*
UltimateElongation*
min. %
Cotton1/8 thru 1/4 36, 4865*065A0447
1300* 300*
Thicknessinches
Widthinches
DurometerHardness*Shore A ± 5
FabricType
Tensile*min. psi
*Physicals are based on rubber only (no insert).This construction includes the following fabric content per thickness: 1/8“ = 1 ply 3/16” = 2 plies 1/4” = 3 plies
Like Regular Ply CI Sheet, reduced ply CI sheet addresses the need for dimensional stability in applications with high compression loads. Cotton fabric content per thickness is one ply for 1/8”, two plies for 3/16”, and three plies for 1/4”.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Features
Cotton-InsertedSheet
Cloth-Inserted SBR - Reduced Cotton Ply
Estimated WeightPer Foot
(1/8” x 36”)
2.75 lb–30ºF to +170ºF
TemperatureRange
UltimateElongation*
min. %
4.0 ozPolyester1/8 thru 1/4 36, 4865*
065A04461300* 300*
Thicknessinches
Widthinches
DurometerHardness*Shore A ± 5
FabricType
Tensile*min. psi
*Physicals are based on rubber only (no insert).This construction includes the following fabric content per thickness: 1/8“ = 1 ply 3/16” = 2 plies 1/4” = 3 plies
Like Regular Ply CI Sheet, reduced ply CI sheet addresses the need for dimensional stability in applications with high compression loads. Polyester fabric content per thickness is one ply for 1/8”, two plies for 3/16”, and three plies for 1/4”.Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
Features
Polyester-InsertedSheet
Cloth-Inserted SBR - Reduced Polyester Ply
Estimated WeightPer Foot
(1/8” x 36”)
2.74 lb–30ºF to +170ºF
TemperatureRange
27Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Estimated WeightPer Linear Foot
(1/8” x 36”)
Thicknessinches
Widthinches
DurometerHardness*Shore A ± 5
OilResistance
2.23 lb
2.40 lb
2.73 lb
1/16 thru 1/4
1/16 thru 1/4
1/16 thru 1/4
36, 48
36, 48
36, 48
50050A0425
50050P1016
60060E1395
1500
1500
1500
250
250
250
High
n/a
Medium
2.23 lb1/16
thru 1/436, 4850
050A0425
Class
3
4
2
1 1500 250 n/a
UltimateElongation*
min. %
Tensile*min. psi
SBR
Nitrile
Neoprene
SBR
Polymer
10.8 oz
10.8 oz
10.8 oz
10.8 oz
FabricWeightper sq yd
-40ºF to +220ºF
-40ºF to +200ºF
-40ºF to +250ºF
-40ºF to +200ºF
TemperatureRange
*Physicals are based on rubber only (no insert).This construction includes one 10.8 oz (per sq yd) cotton ply for each 1/16” thickness:1/16” = 1 ply; 1/8” = 2 ply; 3/16” = 3 ply; 1/4” = 4 ply
Designed for ventilating systems and for flange joints for water or brine systems to
withstand 250 pounds of pressure. A typical application is a flange gasket in which the compression loads are so high that non-reinforced rubber would squeeze or extrude out between the flanges.Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: CottonNon-Stock Minimum: 2 rolls (For 1 roll, please call for quote)
HHP-151F Cloth-Inserted (CI) Sheet
A family of both soft and hard, black, versatile thermoplastic. This material combines good
physical properties and chemical resistance for use in a wide range of applications. Specified for its performance properties in a variety of industries: major appliances, caster wheels, mass transit, safety & protection, marine and industrial machinery. Finish: Smooth Color: Black Trim: Trimmed Minimum: Please call for quote
Thicknessinches
Widthinches
DurometerHardness
Shore ± 5
DurometerType
UltimateElongation*
%Specifications
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
24
24
24
24
24
24
24
64101M0064
73101M0073
80101M0080
55101M0055
87101M0087
40103M0040
50103M0050
A
A
A
A
A
D
D
1000
1200
1600
640
2300
2750
4000
440
375
450
330
550
600
600
MSAR20A
Tensile*psi
Estimated WeightPer Foot
(1/8” x 24”)
General Purpose Grade TPE - Black
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
TemperatureRange
*Typical Values
28Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
SpecificationsDaimlerChrysler, Ford Worldwide, General Motors
MSAR20C, WSD-M2D380-A1,
GMP.E/P.003
MSAR20D, WSD-M2D381-A1,
GMP.E/P.004
MSAR20E, WSD-M2D382-A1,
GMP.E/P.005
MSAR30A, WSD-M2D441-A,
GMP.E/P.006
MSAR30B, WSD-M2D712-A1,
GMP.E/P.007
MSAR20B, WSD-M2D379-A1,
GMP.E/P.002
A family of soft, as well as hard, colorable, versatile thermoplastic. This material
combines good physical properties and chemical resistance for use in a wide range of applications. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote
Thicknessinches
Widthinches
DurometerHardness
Shore ± 5
DurometerType
UltimateElongation*
%
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
24
24
24
24
24
24
24
64201M0064
73201M0073
80201M0080
55201M0055
87201M0087
40203M0040
50203M0050
A
A
A
A
A
D
D
1000
1200
1600
640
2300
2750
4000
440
375
450
330
550
600
600
- - - - -
Tensile*psi
Estimated WeightPer Foot
(1/8” x 24”)
General Purpose Grade TPE - Neutral
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
TemperatureRange
*Typical Values
Santoprene™ 241-55 TPE is manufactured by
Exxon Mobil and compliant with NSF/ANSI 51 & 61 for plumbing applications in contact with potable water and food processing equipment. Complies with FDA regulations for rubber articles intended for repeated use, as well as those in contact with non-fatty, non-oily foods as closures and sealing gaskets. Made in the USA.Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote
SpecificationsThicknessinches
Widthinches
DurometerHardness
Shore ± 5
DurometerType
UltimateElongation*
%
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
24
24
24
24
24
24
24
64241M0064
73241M0073
80241M0080
55241M0055
87241M0087
40243M0040
50243M0050
A
A
A
A
A
D
D
1000
1200
1600
640
2300
2750
2700
440
460
500
330
500
550
550
Tensile*psi
Estimated WeightPer Foot
(1/8” x 24”)
NSF/ANSI 51 & 61Compliant
Santoprene™ 241-55 TPE (NSF Compliant)
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
TemperatureRange
*Typical Values
29Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
MSAR40A
MSAR40B
A hard, colorable, flame retardant material. It exhibits good fluid resistance and contains non-ether brominated flame retardants
(non-furan emitting). It does not contain added antioxidants or metal deactivators.Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote
Thicknessinches
Widthinches
DurometerHardness
Shore ± 5
DurometerType
UltimateElongation*
%Specifications
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
Tensile*psi
Estimated WeightPer Foot
(1/8” x 24”)
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
24
24
24
24
24
85251M0085
92251M0092
36253M0036
80251M0080
50253M0050
A
A
D
A
D
1480
2020
1700
1050
3720
445
530
490
410
660
Flame Retardant Grade TPE
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
TemperatureRange
*Typical Values
FDA approved ingredients
per 21 CFR 177.2600
TPEs (thermoplastic elastomers) have the properties and performance of rubber, but are
processed like plastic. It has excellent clarity & superior colorability, and very good heat resistance. It was designed for applications where FDA compliance, clarity & enhanced heat resistance are required. Safe to use for repeated food exposure. Finish: Smooth Color: Black Trim: Trimmed Minimum: Please call for quote
Thicknessinches
Widthinches
DurometerHardness
Shore ± 5
DurometerType
UltimateElongation*
%Features
1.27 lb
1.27 lb
1.27 lb
Tensile*psi
Estimated WeightPer Foot
(1/8” x 24”)
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
24
24
24
64171M0064
73171M0073
55171M0055
A
A
A
1000
1200
640
440
460
330
FDA Approved Grade TPE - Black
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
TemperatureRange
*Typical Values
TPEs (thermoplastic elastomers) have the properties and performance of rubber, but are
processed like plastic. It has excellent clarity & superior colorability, and very good heat resistance. It was designed for applications where FDA compliance, clarity & enhanced heat resistance are required. Safe to use for repeated food exposure. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote
ThicknessInches
WidthInches
DurometerHardness
Shore ± 5
DurometerType
UltimateElongation*
%Specifications
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
1.27 lb
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
0.02 thru 0.25
24
24
24
24
24
24
24
64271M0064
73271M0073
80271M0080
55271M0055
87271M0087
40273M0040
50273M0050
A
A
A
A
A
D
D
1000
1200
1600
640
2300
2750
4000
440
460
500
330
500
550
550
FDA approved ingredients
per 21 CFR 177.2600
Tensile*psi
Estimated WeightPer Foot
(1/8” x 24”)
FDA Approved Grade TPE - Neutral
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
–50ºF to +275ºF
TemperatureRange
*Typical Values
30Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Approximate WeightPer Foot(12” x 36”)
Thicknessinches
Widthinches
Color SurfaceTexture Specifications
Corrugated1/8BlackHalf = 75 feetFull = 150 feet 2.1 lb ASTM D 2000 1AA 70624, 36, 48, 72
ApproximateRoll Length
Corrugated MattingMost widely used where floor protection and safety are vitally important. Applications include general use in industry, home and office for heavy traffic areas, aisles, hard floor surfaces or as anti-fatigue matting. Use thicker mattingfor extra heavy duty service. Product strengths include extended wear, all-weather, strong sound absorption characteristics, cleanability and wearresistance. Will not curl, shrink, or separate. This product can be easily beveled and perforated for entry mat use.Finish: Corrugated Texture Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote
24, 36, 48, 72
Corrugated3/16Black 75 feet 3.7 lb36, 48, 72
Corrugated1/4Black75 feet
72” = 36 feet 5 lb
Corrugated3/8Black 18 feet 7.4 lb
ASTM D 2000 1AA 706
ASTM D 2000 1AA 706
ASTM D 2000 1AA 70672
Approximate WeightPer Foot(12” x 36”)
Thicknessinches
Widthinches
Color SurfaceTexture Specifications
Corrugated1/4Black 75 feet 5 lb*ASTM D 178-93Type 1 Class 224, 36, 48
ApproximateRoll Length
*Conforms to OSHA Regulations. Ref. 29 CFR 1920.137 & 29 CFR 1910.309(b)
ASTM Switchboard Type 1 MattingExpressly designed to protect against electrical shock when working around high voltage apparatus such as fuse boxes, control panels, and electrical machinery, when used as specified by ASTM D178-93, as amended. Proof tested at 20,000 volts AC. Maximum recommended use voltage is 17,000 volts. Dielectric strength 30,000 volts AC. Permanently branded. Please refer to specifications for additional information. Finish: Corrugated Texture Color: Black Trim: Trimmed
31Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Approximate WeightPer Foot(12” x 36”)
Thicknessinches
Widthinches
Color SurfaceTexture
Non-Directional,Textured Finish0.08Black
Half = 75 feetFull = 150 feet 1.6 lb ASTM D 2000 1AA 70436, 48
ApproximateRoll Length Specifications
KleenRite® MattingKleenRite® matting is ideally suited for tool box lining, utility vehicles, step stools and a myriad of other applications. Finish: KleenRite Texture Color: Black Trim: Trimmed
FingerTrac Entrance MatsStop dirt at the door with WARCO BILTRITE's FingerTrac Entrance Mats.WARCO BILTRITE provides high quality FingerTrac Rubber Entrance Mats made in the USA designed to maintain cleanliness and to help protect and extend flooring life. Perfectly suited for outdoor or indoor entrances and specifically designed to clean and scrape shoe soles of any dirt, sand, grit, mud and snow - eliminating ugly tracking problems in office buildings, retail establishments and homes, resulting in reduced costs on floor and carpet maintenance issues.
All weather high performance mat
Designed with thousands of flexible tapered vertical rubber fingers that scrape shoe soles clean and a thicker base that provides more flexing and longer wear
Contains 30% more fingers and is 25% heavier on average than the imports
Full 1/8" fingerbed thickness
Beveled edges on all four sides enhance safety while trapping dirt and other elements
Easy to clean
Utilize the FingerTrac superior construction by placing at workstations as anti-fatigue mats
Tredair Anti-Fatigue Comfort MatsThe ultimate in comfort with honeycombed air cells providing resilience while creating long-lasting foot and leg comfort that decreases back fatigue. Greater comfort translates into increased productivity and wellness. Interlocking and beveled edge design allows flexibility to form any length. Black in Color
32Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
UltimateElongation
min. %
Inner DiameterRangeinches
Wall ThicknessRangeinches
DurometerHardnessShore A ± 5
Specifications
1/16 thru 560060E0055
1500 300Mil-R-6855 Class 2
Type A/B Grade 601/32 thru 1
Tensilemin. psi
Protects wires and cables from abrasion, corrosion and the elements. Designed to fit loose or be blown on to wire bundles for a tight fit. WARCO BILTRITE carries compound in stock for a shorter production lead time.Color: Black Purchase Minimum: $500.00 per line item
Neoprene Cable Jacket Tubing to Mil-R-6855 Class 2 Type A/B Grade 60
–50ºF to +220ºF
TemperatureRange
Catalog Pricing is available on the following pages for the Wall Thicknesses below:
3/32”Wall
1/32”Wall
5/32”Wall
3/64”Wall
3/16”Wall
1/16”Wall
1/8”Wall
UltimateElongation
min. %
Inner DiameterRangeinches
Wall ThicknessRangeinches
DurometerHardnessShore A ± 5
Specifications
1/16 thru 560060E0713
1500 300
Anti-Fungal Per Mil-Std-8.10,ASTM G21, Mil-Std-454 Req 4,
Mil-R-6855 Class 2Type A/B Grade 60
1/32 thru 1
Tensilemin. psi
WARCO BILTRITE’s 60 Durometer Neoprene Tubing is Anti-Fungal per Mil-Std-8.10 and is designed to meet the Mil-R-6855 Class 2 specification. Compression Set = 50% max. Material is supplied unmarked. For markings, please contact us.Color: Black Stock-Item Purchase Minimum: 10 Feet Non-Stock Purchase Minimum: Please call for quote
60 Durometer Neoprene Tubing
–50ºF to +220ºF
TemperatureRange
1/2”(± 0.016)
9/16”(± 0.017)
5/8”(± 0.018)
1/4”(± 0.010)
5/16”(± 0.011)
3/8”(± 0.013)
21/32”(± 0.019)
3/4”(± 0.021)
DurometerHardness
(Shore A ± 5)
Inn
er
Dia
me
ter
(in
ch
es)
60 Duro060E0713
The following sizes are stock items:
5/8” ID(± 0.018)
1/16” Wall(± 0.009)
3/8” ID(± 0.013)
1/16” Wall(± 0.009)
5/16” ID(± 0.011)
1/16” Wall(± 0.009)
1/4” ID(± 0.010)
1/16” Wall(± 0.009)
1/2” ID(± 0.016)
1/16” Wall(± 0.009)
9/16” ID(± 0.017)
1/16” Wall(± 0.009)
21/32” ID(± 0.019)
1/16” Wall(± 0.009)
3/4” ID(± 0.021)
1/16” Wall(± 0.009)
Please contact us for stencilling, other dimensions, profiles or polymers and for orders over $500.00Call 714-532-3355 or email [email protected]
$1.2831265092
$1.45
$1.6331265094
$1.76
$2.16
$0.75
$0.90
$0.97
(± 0.009)Wall
Thickness
1/16”
31265091
31265093
31267794
Prices are per foot ($/ft). $10.00 Min.
= Regularly Stocked Items.
31267792
31267793
31265095
33Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Rubber Waterstop has been used extensively on projects throughout the United States and the world. Beginning with projects designed to meet the U.S. Army Corps. of Engineers’ and the U.S. Bureau of Reclamation’s specifications, Rubber
Waterstop usage has expanded to all types of concrete structures for the purpose of keeping liquids in or out. SBR Rubber is used primarily for water containment, while Neoprene Rubber is used generally for projects involving sewage, water treatment, and chemical environments. Waterstops are also available in other polymers such as EPDM, Nitrile, Silicone, and Natural Rubber. WARCO BILTRITE maintain Waterstop compounds that meet the U.S. Army Corps of Engineers’ CRD-C-513-71 specification and Caltrans 51-2.04 specification. Other compounds can be provided to meet other national and international specifications in accordance with project requirements. Non-specification commercial grade Rubber Waterstop is also available. Please contact us for details.
Rubber Waterstop
Tensile Strength PSI (min)
Tensile Strength @ 300% Modulus (PSI min)
Ultimate Elongation, (% min)
Durometer, Shore A (+/- 5)
Water Absorption, 2 Days at 70C % Weight Change (% max)Compression Set, 22 hrs. @ 70C % of original deflection (max)Accelerated Aging, 96 hrs. @70C % of Tensile Strength before aging (min) % of Elongation before aging (min)Ozone Resistance, 7 Days at 50 PPHM @ 38C, 20 % Elongation
ASTM TestMethods
SBR(Styrene Butadien)
NaturalRubber
High TensileNeoprene*
D412
D412
D412
D2240
D471
D395(Method B)
D573D573
D1149
3000
1150
450
65
5
30
8080
no cracks
3500
1450
500
65
5
30
8080
no cracks
2500
1150
450
65
5
40
8080
no cracks
*Provides Maximum Resistance to Ozone, Sewage, Oil, and Solvents
Physical Properties Chart of Various Polymers
Thicknessinches
Widthinches
DurometerHardnessShore A ± 5
Specifications
2.56 lb1/8 thru 1/2 36, 4855055E0507
2000 300 Caltrans 51-2.04Waterstops
UltimateElongation
min. %
Tensilemin. psi
Estimated WeightPer Foot
(1/8” x 36”)
Finish: Smooth Color: Black
Caltrans Strip Waterstop
–40ºF to +220ºF
TemperatureRange
Single piece molded construction ensures exceptional strength and stretch resiliency. The special EPDM compound used in the construction of WARCO BILTRITE Utility Straps is suited for high oxidation and weather resistance without cracking. An assortment of lengths including 6 in, 10 in, 15 in, 15 in, 21 in, 31 in are available.
Utility Tarp Straps
34Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
The profiles below are normally provided in SBR and Neoprene compounds as required. Waterstop is usually provided in 50 ft. lengths, but can be manufactured in longer and shorter lengths to minimize field splicing. Special profiles and compounds can be provided to meet specific project requirements. WARCO BILTRITE Rubber Waterstop is also available in non-spec commercial grade.
Waterstop Extruded Profile Chart
ProfilesNormal Size
(Width x Thickness x Bulb O.D.) PolymerWeight Per
100 Feet
Neoprene
SBR
Neoprene
SBR
Neoprene
SBR
Neoprene
SBR
160 lb
130 lb
230 lb
190 lb
125 lb
105 lb
300 lb
250 lb
Dumbbell Type 6” x 3/8” x 3/4” end bulbs
152.4mm x 9.5mm x 19mm end bulbs
Dumbbell Type 9” x 3/8“ x 3/4” end bulbs
228.6mm x 9.5mm x 19mm end bulbs
Center Bulb Type 6” x 1/4“ x 5/8” end bulbs (1 1/8” center bulb)
152.4mm x 6.3mm x 15.9mm end bulbs (28.6mm center bulb)
Center Bulb Type 9” x 3/8“ x 1” end bulbs (1 1/2” center bulb)
228.6mm x 9.5mm x 25.4mm end bulbs (38mm center bulb)
Utilize the Molded Waterstop Intersections below in conjunction with WARCO BILTRITE’s Extruded Waterstop profiles above to create custom systems that fit a multitude of applications.
C 6” DBU C 9” DBU C 6” DBCBU C 9” DBCBU
C 6” DBFC C 9” DBFC C 6” DBCBFC C 9” DBCBFC
C 6” DBFT C 9” DBFT C 6” DBCBFT C 9” DBCBFT
C 6” DBFE C 9” DBFE C 6” DBCBFE C 9” DBCBFE
C 6” DBVE C 9” DBVE C 6” DBCBVE C 9” DBCBVE
C 6” DBVT C 9” DBVT C 6” DBCBVT C 9” DBCBVT
Flat Cross
Flat Tee
Flat Ell
Vertical Tee
Vertical Ell
Union
TYPE6“ 9“ 6“ 9“
Waterstop Molded Intersections
36Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
Table of Contents
General Production Information
Specification Index
Neoprene SheetBLACKOUT Commercial NeopreneCommercial Neoprene - Style 10Matte Finish Neoprene - Style 12Mid-Grade Neoprene - 5100 SeriesPremium Neoprene (100% Neoprene)FDA NeopreneNeoprene Performance Molded SheetsASTM D 2000 M2BC (Neoprene)MIL-R-6855 Class 2 (A&B) - Oil Resistant NeopreneMIL-R-3065 SC (Neoprene)Aerospace Material Specification (Neoprene/Nitrile)Anti-Microbial NeopreneLow Smoke, Low Flame, Low Toxicity Neoprene
Nitrile (Buna-N) SheetCommercial Nitrile - Style 35Premium NitrileFDA Nitrile - Style 37WARCO White® FDA NitrileMIL-R-6855 Class 1 (Fuel Resistant Nitrile)MIL-R-3065 SB (Nitrile)ASTM D 2000 M5BG (Nitrile)MIL-G-1149 (Neoprene/SBR/Nitrile)MIL-R-2765 (Nitrile)Transformer Oil MaterialBio-Diesel Nitrile
SBR SheetRed Rubber SBR - Style 20Specification Grade SBRPremium SBR - Style 22
Natural Rubber SheetNatural Rubber - Style 28Black Natural RubberPure Gum FloatingEZ Cut Non-Floating GumProtein Free (Synthetic Polyisoprene)Tuff-Stuff®
EPDM SheetCommercial EPDM - Style 40Premium EPDM - Style 45Premium EPDMPeroxide Cure EPDMMIL-R-21252 (EPDM)MIL-R-83285 GR80 (EPDM)MIL-R-900 (EPDM)ASTM D 2000 M4AA (EPDM)
Skirtboard & Chute Lining
AASHTO Bearing PadsAASHTO Unsupported Neoprene
Bearing Pads - Style 71AASHTO Unsupported Natural Rubber
Bearing Pads - Style 72AASHTO Unsupported Calendered Neoprene
Bearing PadsAASHTO Unsupported Molded Neoprene
Bearing Pads
Viton® & Fluoroelastomer SheetFluorozone® Premium Performance FKMFluorozone® Brown Premium Performance FKMFluorozone® Mil-Spec Performance FKMFluorozone® FDA Performance FKMCommercial Viton™ ABrown Commercial Viton™ APremium Viton™ AMil-Spec Viton™ APremium Viton™ BFDA Viton™ A
Silicone SheetINFINISIL™ Performance SiliconeINFINISIL™ Spec-Grade Performance SiliconeINFINISIL™FDA Performance Silicone
Butyl Sheet
Cloth-Inserted (CI) SheetCloth-Inserted Neoprene - Regular Cotton PlyCloth-Inserted Neoprene - Regular Polyester PlyCloth-Inserted SBR - Regular Cotton PlyCloth-Inserted SBR - Regular Polyester PlyCloth-Inserted SBR - Reduced Cotton PlyCloth-Inserted SBR - Reduced Polyester PlyHHP-151F Cloth-Inserted Sheet
Thermoplastic Elastomer SheetGeneral Purpose Grade TPE - BlackGeneral Purpose Grade TPE - NeutralSantoprene™ 241-55 TPEFlame Retardant Grade TPEFDA Approved Grade TPE (Black)FDA Approved Grade TPE (Neutral)
Rubber Mats & MattingCorrugated MattingASTM Switchboard Type 1 MattingKleenRite® MattingFingerTrac® Entrance MatsTredair® Comfort Mats
Rubber Extrus60 Durometer Neoprene TubingNeoprene Cable Jacket Tubing to MIL-R-6855
Utility Tarp Straps
Rubber Waterstop
TERMS AND CONDITIONS OF SALE
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . 6. . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . . 7. . . . . . . . . . . . . . . . . . . . 8
. . . . . . 8. . . . . . . . . . . . . . . . . . . . . . . . . 8
. . . . 9. . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . 11. . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . 11. . . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . . . . . 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13. . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14. . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . . . . . . . . . . 15. . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15. . . . . . . . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17. . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17. . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . 20. . . . . . . . . . . . 20
. . . . . . 20. . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . 21. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23. . . . . . . . . . . . . . . . . . . 23
. . . . . . . . . 23. . . . . . . . . . . . . . . 24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . . 25. . . . . . . . 25
. . . . . . 25. . . . . . . . . . . . . 26
. . . . . . . . . . . 26. . . . . . . . . . . . 26
. . . . . . . . . . . 26. . . . . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . . . . . . 27. . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . 28. . . . . . . . . . . . . . . . . . . . . . . . . 28
. . . . . . . . . . . . . . . . . . . . . . . 29. . . . . . . . . . . . . . . . . . . 29
. . . . . . . . . . . . . . . . . 29
. . . . . . . . . . . . . . . . . . . . . . . . . . . 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
. . . . . . . . . . . . . . . . . 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. . . . . . . . . . . . . . . . . . . . . . . . 31. . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. . . . . . . . . . . . . . . . . . . 32
. . . . . . . . 32
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
. . . . . . . . . . . . . . . . . 37
For more information, please visit us at warco.com
37Contact Customer ServiceTel: 714-532-3355 Toll-Free: 800-245-8748 Email: [email protected]
WARCO BILTRITE products are sold commercially for multiple applications as determined by the end-user. Information on certain physical properties of our various styles and grades is provided in our product literature, but such information is unrelated to any particular use or application. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. Consultation with qualified engineers and testing laboratories is recommended. WARCO BILTRITE does not recommend any of its products for any particular use or application. The purchaser or user shall assume full responsibility for the adequacy and suitability for the intended use. Rubber products may fail as a result of temperature variances, excessive pressures, abrasion or damaging substances. The wear life of rubber products is limited by the circumstances and conditions of use. Rubber materials should be inspected regularly and should be replaced as appropriate for operational and safety requirements and the prevention of injury or damage to persons and property.Our rubber products, except where indicated, are a proprietary blend of various polymers formulated to meet stated physicals and specifications. The named polymer is not necessarily the polymer representing the highest percentage of the polymer blend. The various specification call outs are a valuable guide in selecting the type and grade of sheet rubber for a particular application. In any application, the customer should evaluate the performance requirements and conditions that will affect the working life of the rubber product. Field should be performed before the type of rubber is selected. If the customer’s quality assurance incorporates the testing of rubber material, the test criteria should include the physical property call outs of the specifications that are most critical to its application. Polymer type alone may not be adequate for the selecting of the rubber that is best suited for a specific application.ASTM basic requirements for physical properties are based on values obtained from standard laboratory test specimens prepared and tested in accordance with the applicable ASTM test methods. Test results from specimens prepared from finished products may not duplicate values obtained from standard test specimens. Per ASTM D2000, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance with Practice D 3183, a deviation to the extent of 10% on tensile strength and elongation values is permissible.Unless stated otherwise, products are manufactured to meet standard RMA Commercial guidelines. Per RMA, roll goods may contain multiple pieces. 1. PAYMENTS: Seller may require full or partial payment in advance at any time if in its sole judgment, the financial condition of the Buyer does not justify the terms of paymentspecified herein. A charge of 1-1/2 percent (1-1/2%) per month (or at the highest ratepermitted by law) shall be payable on all overdue accounts. Orders will not be processeduntil payment terms are approved by Seller’s Credit Department.2. PRICES SUBJECT TO CHANGE: Seller may change any price, shipment or freight term in effect at any time and from time to time by giving Buyer at least fifteen (15) days written notice thereof. Buyer’s failure to give Seller a written objection to any such change withinten (10) days after receipt of notice shall constitute acceptance of such change. Whereobjection is made, Seller shall advise Buyer within ten (10) days thereafter whether Sellerwill (a) continue to deliver at the price or on the terms in effect prior to the announcedchange, or (b) cancel this contract. Any cancellation shall be effective upon Buyer’s receipt of Seller’s notice and shall be without further obligation of either party to the other except to perform or pay all obligations accrued through date of cancellation. Provided however, that in the case of non-stock items ordered specifically for Buyer’s use, Seller reserves the right to increase prices to cover the increases in its costs arising from increases in the cost ofmaterials or labor rates which become effective between the date of this acknowledgment and the date of shipment. In such event, this Agreement shall remain in effect at the priceadjusted to reflect said increases.3. MINIMUM PURCHASE: Stock sheet Item = One roll minimum.
Non-stock sheet and Custom items = Please request quote.4. TAXES: Buyer shall reimburse Seller for all taxes, excises or other charges which Seller may be required to pay to any governmental entity (national, state or local) upon the sales, production or transportation of the goods sold hereunder.5. DELIVERY: Unless otherwise specified herein, goods will be delivered F.O.B. point ofshipment, freight allowed on specified pounds. Seller will determine the point of origin ofshipment, the method of transportation, and the routing of shipment. Partial deliveries shall be accepted by the Buyer and paid for at the prices and terms hereunder. Seller does notguarantee any delivery or completion date. In the event of delay in delivery of goods, Seller shall not be liable or responsible for any loss, damage, expense or charge of any kind,direct or indirect, suffered or incurred by Buyer as a result of such delay.6. TITLE AND RISK OF LOSS: Title and risk of loss in the goods shall pass to Buyer upon Seller’s delivery to carrier at the shipping point, notwithstanding the terms of shipmentspecified herein.7. WARRANTIES AND DISCLAIMERS: Goods furnished under this Agreement shallconform to the description herein. All first quality goods are warranted to be free fromdefects in material and workmanship at the time of shipment. Seller shall convey good title to buyer. Seller further warrants that the goods sold hereunder do not infringe any validUnited States patent, but Seller does not warrant, however, that the use of the goods orproducts made therefrom, either alone or in conjunction with other materials, will notinfringe any valid United States patent. THE WARRANTIES SET FORTH IN THISPROVISION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIESEXPRESSED OR IMPLIED, INCLUDING WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE. SELLER MAKES NO WARRANTY, EXPRESSED ORIMPLIED, OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.ALL PRODUCTS ARE SOLD AND WARRANTED ONLY PURSUANT TO OURPUBLISHED TERMS AND CONDITIONS OF SALE. WE ARE NOT RESPONSIBLE TOTHE USER FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGESRESULTING FROM PRODUCT USE OR PROCESSING.8. CLAIM PERIOD AND REMEDIES: Prompt written notice shall be given to Seller of any claim of failure of goods to conform to the warranties hereunder. Should any failure toconform to these warranties appear under normal and proper use within the period of one (1) year from the date of shipment to the Buyer, Seller shall correct such nonconformity, at its option, by repair or replacement of the defective goods, or by the refund of the purchase price thereof with due allowance made for the service rendered by the goods returned. Inno event shall Buyer commence any action under this Agreement later than one year after receipt of the goods. The remedies provided above are the Buyer’s sole remedies for anyfailure of Seller to comply with its obligations. Correction of any non-conformity by repair or replacement or by refund of the purchase price of the nonconforming goods (less allowance for use) shall constitute fulfillment of all obligations of Seller with respect thereto, whether the claims of Buyer are based in contract, or tort (including negligence), or otherwise.
STANDARD TERMS AND CONDITIONS OF SALEIndustrial Rubber Products
9. LIMITATION OF LIABILITY: Seller shall not be liable in contract, in tort (includingnegligence),or otherwise for damage or loss of other property, loss of profits or revenue,loss of use of property or equipment, claims of customers of the Buyer, or for any special, indirect, incidental, or consequential damages whatsoever. Under no circumstances shallSeller’s liability exceed the purchase price of the goods in respect of which damages areclaimed.10. PRODUCTS SUITABILITY AND LENGTH OF SERVICE: Determination of thesuitability of the goods for the uses and applications contemplated by Buyer and othersshall be the sole responsibility of the Buyer or user. No guaranty is given with respect tolength of service on any particular application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since theconditions of the use and application by Buyer and others are beyond Seller’s control.11. FORCE MAJEURE: Seller shall not be liable for failure to perform or for delay inperformance due to fire, flood, strike or other labor difficulty (Seller shall not be required to settle any labor matter against its own best judgment), act of God, act of any governmentauthority, acts or omissions of the Buyer, riot, embargo, explosion, accident, breakdown of machinery or equipment, shortage of or inability to obtain fuel, power, raw materials,equipment, transportation of the product at usual prices or usual sources, or due to anyother cause beyond its reasonable control. Quantities so affected by such circumstancesmay be eliminated without liability, but this Agreement shall otherwise remain unaffected.12. RETURNED GOODS: No goods may be returned without Seller’s prior writtenauthorization. Each request for exchange or return shall describe the condition of the goods and the reasons for the requested return or exchange. If the Seller agrees to accept a return or exchange, the Buyer shall pay return transportation cost and a restocking charge; therestocking charge will be determined based upon the Seller’s ability to resell the exchanged or returned material and the reason for the return.13. QUANTITY VARIANCE: Due to manufacturing variances, the quantity of goodsdelivered will be within 10%, more or less, of the quantity specified and shall be charged at the unit price herein.14. ENTIRE AGREEMENT: This Agreement constitutes the complete and final Agreement of sale and purchase of the goods specified herein and supersedes all prior contracts and discussions. No modification hereof shall be effected by the use of purchase order,acknowledgment, acceptance, or other forms at variance with or in addition to the termsand conditions contained herein. No modification shall be effected in any manner other than in writing and signed by the party claimed to be bound thereby.15. GOVERNING LAW: This contract shall be governed by and construed under the lawsof the State of California.16. TRANSPORTATION POLICY: All deliveries will be made F.O.B. Point of Shipment,freight calculated and billed when releases for shipment are below the stated freightallowances for the product ordered, released and shipped. For specific freight allowancesplease refer to catalog sections for products ordered. Freight prepaid and allowed by most economical routing on shipments weighing 3,000 lbs or more to one destination, from one location, one shipment, one purchase order, within the continental United States. Applicable surcharges and/or accessorial charges are not covered and will be billed accordingly.Freight allowance applies to roll goods of WARCO calendered Sheet products and BiltriteSheet & Matting products only. Does not apply to "Buy the Foot" items or extruded, molded, and spliced products. Orders including both stock and made-to-order items will not becombined for weight unless the stock items are stocked at the manufacturing plantproducing the made-to-order items and the customer is willing to wait for shipment at onetime to one destination. All price page and catalog weights are approximate and actualshipping weights may vary from these listings. In case of dispute, actual shipping weightswill apply. Origin, Method of Shipping and Routing: Seller will determine the point oforigin of shipment, the method of transportation and the routing of shipment. Purchasersrequiring shipment by a method or routing other than that will be billed any excess orpremium in transportation charges. If Seller elects to ship by other than common carrier,the full transportation charges will be prepaid and any freight charges billable (underallowances) will be calculated and billed. Purchaser Pick Up: No allowance will be made in lieu of transportation if the buyer accepts shipment at the factory or the warehouse orfreight station. Transportation charges will not be deducted from the selling price.17. CONCEALED DAMAGE: Seller will not participate in any settlement of claims forconcealed damage. Upon receipt of any shipment, Buyer must unpack immediately and, if damage is discovered, must:
• Not move the product from the point of examination• Retain shipping container and packing material• Notify the carrier’s agent to make an inspection and confirm in writing• Send Seller a copy of the carrier’s inspection report• Make a claim for damage with the carrier• Recovery for any damage to merchandise incurred during shipping shall be the sole
responsibility of Buyer. Any such damage shall not defeat or otherwise affect theobligation of Buyer to pay all amounts due Seller with respect to the damaged goods.
18. CANCELLATION: Requests for cancellation or modification of orders must besubmitted in writing and received by Seller at least 2 days prior to shipment. Anycancellation or modification will be effective only when acknowledged in writing by Sellerand can be made subject to status of production of goods. Orders for merchandiseproduced specifically for a customer cannot be canceled once goods are produced.19. ACCEPTANCE OF ORDERS: Issuance of any Catalog or Price List does not constitute an offer for the sale of any products described therein. All orders are subject to theacceptance of Seller. All orders accepted by Seller are accepted on the understanding that Buyer, by placing the order, has agreed to these Standard Terms & Conditions of Sale and that they are therefore part of the Buyer's order. 20. ATTORNEYS’ FEES AND VENUE: In any action to collect amounts due Seller withrespect to sales made to Buyer, arising out of or relating to this Agreement or any suchsales, or in which a party seeks an interpretation of this Agreement or asserts it as adefense, the prevailing party shall be entitled to recover attorneys’ fees in an amountdetermined by the Court to be reasonable, as well as such party’s costs of suit. All notices, requests, claims and other communications by Buyer with respect to this Agreement or sales hereunder shall be directed to Seller at its executive offices at 1337 Braden Court, Orange, California 92868 (714) 532-3355. Any action brought by Buyer against Seller must be brought in a state or federal court located in Orange County, California, and any action brought in any other location shall, upon appropriate motion by Seller, be dismissed.
WEST AMERICAN RUBBER COMPANY, LLC | 1337 BRADEN COURT, ORANGE, CALIFORNIA 92868 | TEL: 714-532-3355 | [email protected] RIPLEY OPERATIONS, LLC | 16310 HIGHWAY 15 NORTH, RIPLEY, MISSISSIPPI 38663 | TEL: 800-245-8748 | [email protected]
TERMS AND CONDITIONS OF SALE ARE SUBJECT TO CHANGE WITHOUT NOTICE. VISIT WWW.WARCO.COM/TERMS FOR THE MOST CURRENT TERMS AND CONDITIONS.
Sales, Manufacturing & Distribution750 North Main Street
Orange, California 92868Tel: 714-532-3355
Fax: 714-532-2238Email: [email protected]
Sales, Manufacturing & Distribution16310 Highway 15 NorthRipley, Mississippi 38663
Tel: 800-245-8748Fax: 662-837-0132
Email: [email protected]
Corporate Office1337 Braden Court
Orange, California 92868Tel: 714-532-3355
Fax: 714-532-2238
West American Rubber Company, LLC
Biltrite Ripley Operations, LLC
For more information please visit us at warco.com
Contents © Copyright West American Rubber Company, LLC 2017. All rights reserved.