+ All Categories
Home > Documents > RUS-L120(-S) Electric 120 Volt Control Damper & Louver ...

RUS-L120(-S) Electric 120 Volt Control Damper & Louver ...

Date post: 13-Nov-2021
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
2
3900 Dr. Greaves Rd. • Kansas City, MO 64030 • (816) 761-7476 • FAX (816) 765-8955 RUS-L120(-S) Electric 120 Volt Control Damper & Louver Actuator DIRECT COUPLED SPRING RETURN ALL STATED SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION. © Ruskin January 2019 Spec RUS-L120(-S)-119/Replaces RUS-L120(-S)-717 RUS-L120(-S) Electric Spring-Return Actuator DESCRIPTION Ruskin model RUS-L120(-S) electric On/Off spring return actuator designed for factory mounting on dampers and operable louvers. Actuators can be mounted directly to a damper or louver shaft from 3/4 to 1 1/16 inch (19 to 27 mm) diameter with a universal clamp. An optional line voltage auxiliary switch indicates an end-stop position or performs switching functions within the field selected 0° to 95° rotation range. FEATURES Designed specifically to operate damper and operable louver applications up to the square footage face area listed below. Reversible mounting design simplifies installation and enables the actuator to be spring return in either direction. Electronic stall detection through entire rotation range extends life by deactivating the motor when an overload condition is detected. 5 Year factory warranty TECHNICAL INFORMATION COMMERCIAL DAMPER FACE AREA* LOUVER FACE AREA INDUSTRIAL DAMPERS RUNNING TIME POWER SUPPLY POWER CONSUMPTION TRANSFORMER SIZE DIRECTION OF ROTATION POSITION INDICATION OPTIONAL AUXILIARY SWITCH (-S Models) ELECTRICAL PROTECTION ELECTRICAL CONNECTION OVERLOAD PROTECTION ROTATION PROTECTION HOUSING HUMIDITY 35 sq. ft. with seals 70 sq. ft. without seals 50 sq. ft. with seals 75 sq. ft. without seals Dependent on model and system conditions (Consult Ruskin) Drive: 24 to 57 sec Spring: < 15 sec AC 120 V (AC 102 V to 132 V) at 50/60 Hz Running .25 amps Holding .13 amps 25 VA Reversible with cw/ccw mounting Visual indication 0° to 95° 2 ea - SPDT 50 VA @ 24 V 5.8 A @ 120 V, 1/4 hp, 275 VA Pilot Duty 5.0A @ 240 V, 1/4 hp, 275 VA Pilot Duty Double insulated 3 ft, 18 ga appliance cable (-S models have 2 cables) 1/2" conduit connector Electronic throughout 0° to 95° rotation Max 95° adjust. with mechanical stop (optional) NEMA 2 (IP54) Aluminum 5 to 90% non-condensing TECHNICAL INFORMATION AMBIENT TEMPERATURE STORAGE TEMPERATURE AGENCY LISTINGS NOISE LEVEL AT APPROX. 40” DISTANCE WEIGHT SERVICING QUALITY STANDARD -40° to 131°F (-40° to 55°C) -85° to 185°F (-65° to 85°C) UL 60730-1A: 2003-08 UL 60730-2-14: 2002-02 UL 2043 C22.2 No. 24-93 Drive: <66 dba Holding: <18 dba Spring: <66 dba RUS-L120: 7.6 lb (3.5 kg) RUS-L120-S: 8.0 lb (3.6 kg) Maintenance free ISO 9001 ACCESSORY ADJUSTABLE END STOP KIT Part #M9220-603 From 35° to 95° in 5°increments SMALLER SHAFT COUPLER WEATHER SHIELDS Part #M9220-601 1/2 to 3/4 in. or 12 to 19 mm Round Shafts, or 3/8 and 1/2 in. or 10, 12, and 19 mm Square Shafts Part #M9000-320 NEMA3R, IP32 OR Part #M9000-340 NEMA 5, IP54 impact-grade plastic enclosure with UV inhibitors to extend life *Consult Ruskin for proper actuator sizing on TED50 series dampers
Transcript
Page 1: RUS-L120(-S) Electric 120 Volt Control Damper & Louver ...

3900 Dr. Greaves Rd. • Kansas City, MO 64030 • (816) 761-7476 • FAX (816) 765-8955

RUS-L120(-S) Electric 120 Volt Control Damper & Louver ActuatorDIRECT COUPLED SPRING RETURN

ALL STATED SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION. © Ruskin January 2019Spec RUS-L120(-S)-119/Replaces RUS-L120(-S)-717

RUS-L120(-S) Electric Spring-Return Actuator

DESCRIPTIONRuskin model RUS-L120(-S) electric On/Off spring return actuatordesigned for factory mounting on dampers and operable louvers.Actuators can be mounted directly to a damper or louver shaft from 3/4to 1 1/16 inch (19 to 27 mm) diameter with a universal clamp. Anoptional line voltage auxiliary switch indicates an end-stop position orperforms switching functions within the field selected 0° to 95° rotationrange.

FEATURES• Designed specifically to operate damper and operable louver

applications up to the square footage face area listed below.• Reversible mounting design simplifies installation and enables

the actuator to be spring return in either direction.• Electronic stall detection through entire rotation range extends life by

deactivating the motor when an overload condition is detected.• 5 Year factory warranty

TECHNICAL INFORMATIONCOMMERCIAL DAMPERFACE AREA*

LOUVER FACE AREA

INDUSTRIAL DAMPERS

RUNNING TIME

POWER SUPPLY

POWER CONSUMPTIONTRANSFORMER SIZEDIRECTION OF ROTATIONPOSITION INDICATIONOPTIONALAUXILIARY SWITCH(-S Models)

ELECTRICAL PROTECTIONELECTRICAL CONNECTIONOVERLOAD PROTECTIONROTATION PROTECTIONHOUSING

HUMIDITY

35 sq. ft. with seals70 sq. ft. without seals50 sq. ft. with seals75 sq. ft. without sealsDependent on model and system conditions (Consult Ruskin)Drive: 24 to 57 secSpring: < 15 secAC 120 V (AC 102 V to 132 V) at50/60 HzRunning .25 ampsHolding .13 amps25 VA

Reversible with cw/ccw mounting

Visual indication 0° to 95°2 ea - SPDT50 VA @ 24 V5.8 A @ 120 V, 1/4 hp, 275 VA Pilot Duty5.0A @ 240 V, 1/4 hp, 275 VA Pilot DutyDouble insulated

3 ft, 18 ga appliance cable (-S modelshave 2 cables) 1/2" conduit connectorElectronic throughout 0° to 95° rotation

Max 95° adjust. with mechanical stop(optional)NEMA 2 (IP54) Aluminum

5 to 90% non-condensing

TECHNICAL INFORMATIONAMBIENTTEMPERATURESTORAGETEMPERATURE

AGENCY LISTINGS

NOISE LEVEL ATAPPROX. 40” DISTANCE

WEIGHT

SERVICING

QUALITYSTANDARD

-40° to 131°F (-40° to 55°C)

-85° to 185°F (-65° to 85°C)

UL 60730-1A: 2003-08UL 60730-2-14: 2002-02UL 2043C22.2 No. 24-93

Drive: <66 dba Holding: <18 dbaSpring: <66 dbaRUS-L120: 7.6 lb (3.5 kg)RUS-L120-S: 8.0 lb (3.6 kg)

Maintenance free

ISO 9001

ACCESSORYADJUSTABLEEND STOP KIT

Part #M9220-603From 35° to 95° in 5°increments

SMALLER SHAFTCOUPLER

WEATHER SHIELDS

Part #M9220-601 1/2 to 3/4 in. or 12 to19 mm Round Shafts, or 3/8 and 1/2 in.or 10, 12, and 19 mm Square ShaftsPart #M9000-320 NEMA3R, IP32 ORPart #M9000-340 NEMA 5, IP54impact-grade plastic enclosure with UVinhibitors to extend life

*Consult Ruskin for proper actuator sizing on TED50 series dampers

Page 2: RUS-L120(-S) Electric 120 Volt Control Damper & Louver ...

DIMENSIONS

WIRING

120 V AC Wiring Diagrams Auxiliary Switch Wiring Diagram

3900 Dr. Greaves Rd.Kansas City, MO 64030(816) 761-7476FAX (816) 765-8955www.ruskin.com

Auxiliary SwitchesThe RUS models include two integralauxiliary switches with a switch adjusteraccessible on either face of the actuator.The nominal factory setting for AuxiliarySwitch No. 1 is 11° closing, and the nom-inal factory setting for Auxiliary SwitchNo. 2 is 81°opening (relative to a 0 to 90°rotation range).

CONDUIT CONNECTION

Integral connectorsfor 3/8 in. (10mm)flexible metal conduit


Recommended