Ryobi UK Powertools 2015 Catalogue

2015

Power Tools

PT 2014_UK-version 5.8.indd 1 05.08.14 16:25


At Ryobi® we’ve built a solid and enviable reputation by developing a real knowledge of exactly what people need from their power tools.

CONTENTS / KEY | 3

*Excluding spares and accessories.

We continue to offer a 2 year warranty on all our products, including the new products that we have introduced for 2014/2015*

All products shown are in compliance with the appropriate European regulations.

Warning: All warranties are country/region specific. Tools purchased e.g. in the USA or via the internet, and imported into Europe, which are not CE approved, not only violate EU legislation, but will not be supported/serviced in Europe by Ryobi® as a result. Only tools bought in the European Union (incl. Switzerland) are covered by an European warranty.

Ryobi® reserves the right to revise product specifications at any time without notice.

KEY

Keyless chuck

Variable speed control

Forward/reverseoperation

Electronic brake

Hammer action

Orbital stroke action

Spindle lock

Dust extraction

Electronic ’Soft Start’

Safety clutch

Tool bag

Carry case

Wet vac

Dry vac

Blower function

Laser light

2 gears

Soft Grip

Magnet

Auxiliary handle

Music / MP3

Spray

SDS

Quick blade / bit change

LED

Wet blade

Low noise

Anti-vibration

Hedge trimmer cutting capacity

Hedge trimmer diamond ground

Tool-less pruner

Air volume

Auto Feed

Charging time

Cutting path diameter

Cutting line diameter

Chainsaw bar length

Telescoping shaft

Tool-less shear

Blade length shear

Blade length hedge trimmer

Blade length pruner

XXcmXXcm

XXcm

XXcm XXcm

XXcm XXcm

Blade width shearXXcm XXcm

XXcm XXcm

XX

XXcm

XXm3/minXXcm

Torque setting 3 positions

New from Ryobi® 4 – 5 / 1418V ONE+™ Battery Technology 6 – 7ONE+™ 18V Cordless Power Tools 8 – 19ONE+™ 18V Cordless Lawn & Garden Tools 20 – 2512V Tools 26 – 274V Tools 28 – 29Batteries & Chargers 30 – 31Corded Drills 33 – 34Corded Angle Grinders 34 – 35Corded Saws 35 – 36Corded Woodworking Tools 37 – 40Heat Gun 40Mitre Saws / Table Saw 40 – 41Work Benches 42Accessory Sets & Accessories 43 – 48

CONTENTS

Weight with battery pack stated are based on the RB18L13 1.3Ah battery pack


4 | NEW FROM RYOBI®

STRAIGHTFIN

LINEASSIST

STRAIGHTFIN• Aids straight line cutting by up to 65%*• Retractable design for convenient storage

* RJS1050 model only

LINEASSIST• Flip down cut guide provides better

line-up with marked line • Splinter shield minimises

splintering during cutting

FLUSHCUT• Increased visibility of cut• Cut flush to front of tool• Aid straight line cutting

PROSTROKE• 23mm Stroke Length deliver

market leading cutting performance• 49% improvement on cutting accuracy*• 30% Reduced vibration*• 4 stage pendulum• Powerful 680W Motor 500-3,100spm• Depth of Cut: Wood 105mm Steel 12mm

Accuracy & Performance

The new range of Ryobi® jigsaws offers class leading cutting performance, accuracy and ease of use...

PROSTROKE

49% IMPROVEMENT ON CUTTING ACCURACY

New from Ryobi®

The Next Generation: Ryobi® Jigsaws

*vs previous Ryobi models

RETRACTABLE FIN IMPROVES STRAIGHT LINE CUTTING BY UP TO

65%*


NEW FROM RYOBI® | 5

Cut Line VisibilityMAXVIEW

• 46% Improvement to viewing angle and wider visible angle of blade

• Better control of cut

AIRFORWARD• Improved air management allows bevel

cutting without dust blown up into face/eyes• Re-directs the exhaust air to clear

the dust away from cutting area• Provides better line of sight

Comfort & Control• Ergonomic Handle• Up to 30% Smaller*• Micro texture overmould• Detachable Vacuum Port

SPEEDCONTROL• Variable speed control dial (RJS850-k

and RJS1050-K only)

• Easy to reach;• Optimised for both left & right-handed users

SURELOCK• Single finger blade-clamp operation• Sure-lock Indicator (RJS850-k

and RJS1050-K only)

• Quick & Secured

EASYBEVEL • Tool-less base bevel adjustment (RJS1050-K only)

• Larger lever actuation for secured locking• Easy access for Quick Bevel Adjustment

SURELOCK

UP TO 30% SMALLER

Also available...Ryobi's new DC jigsaw, the

R18JS-0 with cordless convenience and corded performance.

New from Ryobi®

The Next Generation: Ryobi® Jigsaws

*vs previous Ryobi models

46% IMPROVEMENT TO VIEWING ANGLE*


Fuel Guage

6 | 18V ONE+™ BATTERY TECHNOLOGY

LongerRun Time

Power Management

Improved Performance

ImprovedDurability

Longer Run TimeThe Ryobi® 4.0Ah battery is a first in the consumer

market and offers up to 95% longer run-times

versus our previous technology [BPL1820].

Power ManagementThe Ryobi® fuel guage is the simplest way for

the user to manage their workload.

Improved DurabilityTough pack design with built in impact

protection for long term durability.

Improved PerformanceRyobi IntelliCell technology monitors and balances individual cells to maximise run-times, storage life and safety, whilst improving tool performance by up to 10%.

Intelligent Battery Technology


30013511560

18V ONE+™ BATTERY TECHNOLOGY | 7

ON BOARD

FUEL GAUGE MONITORS BATTERY LIFE

Ryobi® is the only consumer brand offering a 4.0Ah battery pack, which gives the user un-paralleled run time.

PowerManagement

UP TO

10%MORE

ImprovedPerformance

UP TO

50%MORE

ImprovedDurability

UP TO

95%MORE

LongerRun time

ImprovedPerformance

1.2Ah

1.5Ah

Competitor A

Competitor B

1.5Ah

Competitor Battery

WastedBattery

Capacity

Number of holes drilled on one battery charge

Drilling 16mm holes into 47mm thick timber*

Ryobi’s IntelliCell™ technology monitors and balances individual cells taking away the need for wasteful buffers. This technology ensures every cell is fully charged to maximise run times, storage life and safety, while providing up to 10% more usable power.

Run timeput to the test

* Results dependent on tool, battery and application


ONE+™ 18V Tools 9 – 18ONE+™ 18V Cordless Lawn & Garden Tools 19 – 2412V Tools 26 – 274V Tools 28 – 29Battery & Charger Options 30 – 31

CORDLESS POWER TOOLS


With ONE+™

buying yourfirst tool isjust thebeginning…

Save...Buy any tool then expand your family for less. Buy additional tools without batteries and chargers, as a cost effective way to grow your collection.

Choose from over 35 garden & power toolsRyobi’s unique ONE+™ system consists of range of over 35 tools for both home and garden that can all be powered using one battery and charger. Buy the tools you want at the time you need them and avoid paying over the odds for excess batteries and chargers. With everything from drills to radios, trimmers to paint sprayers the choice is there for you to grow your family of tools in whatever direction you want.

StartChoose a kit…We offer a range of starter kits with different tools, batteriesand charger.

OrBattery and charger…Select a battery & charger and then the tool you want from the range as individual items.

18V ONE+™ SYSTEM | 9


2x BatteryBatterieBatterieBateríaBatterij



10 | ONE+™ 18V TOOLS

1 x double-ended screwdriver bit, depth stop, auxiliary handle

Included as standard

LLCDI18022

18V 2-Speed Hammer Drill/Driver

● Combination tool for hammer drilling and screwdriving applications● 13mm metal keyless chuck● Automatic spindle lock for one-handed bit change● Electronic variable speed, reverse and brake for total control

RCD18021L

18V 2-Speed Drill/Driver

● 13mm keyless chuck for greater accessory compatibility● Electronic variable speed, reverse and brake for total

control● Automatic spindle lock for one-handed bit change● 2 gears for most materials and applications● Quick adjustment 24 torque settings● Magnetic bit holder and LED light

LCDI1802M

18V 2-Speed Hammer Drill/Driver

● Combination tool for hammer drilling and screwdriving applications

● 13mm metal keyless chuck● Automatic spindle lock for one-handed bit

change● Electronic variable speed, reverse and brake for

total control

2 x 18V 1.3Ah Compact Lithium-Ion batteries, 1 hour super charger, 1 x double ended screwdriver bit, tool bag

1 x 18V 1.3Ah Compact Lithium-ion battery, 1 hour super charger,1 x double ended screwdriver bit, tool bag



Voltage (V) 18No. of batteries supplied ≠2Charger supplied 45 minMax. torque (Nm) 50Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-400No load speed gear 2 (rpm) 0-1550Max. drilling wood (mm) 38Max. drilling steel (mm) 13Max. drilling masonry (mm) 13Torque settings 24Weight with battery pack (kg) 1.93Supplied in Tool bagArticle Number 5133001955EAN Code 4892210124609

Voltage (V) 18No. of batteries supplied 1Charger supplied 60 minMax. torque (Nm) 50Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-440No load speed gear 2 (rpm) 0-1600Max. drilling wood (mm) 38Max. drilling steel (mm) 13Torque settings 24Weight with battery pack (kg) 1.6Supplied in Tool bagArticle Number 5133001954EAN Code 4892210124593

Voltage (V) 18No. of batteries supplied ≠0Max. torque (Nm) 54Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-440No load speed gear 2 (rpm) 0-1600Max. drilling wood (mm) 38Max. drilling steel (mm)Max drilling masonry (mm)

1313

Torque settings 24Weight with battery pack (kg) 1.6Supplied in –Article Number 5133000246EAN Code 4892210110145

STARTERKIT

STARTERKIT

Also available withoutbattery as: RCD1802M 1x

BATTERY KIT

2x

BATTERY KIT





ONE+™ 18V TOOLS | 11

CDC1802M

18V 2-Speed Drill/Driver

● 10mm keyless chuck● Electronic variable speed, reverse and brake for

total control● Spirit level for precise drilling● 2 gears for most materials and applications● Quick adjustment 24 torque settings● Magnetic screw and bit holder● GripZone™ overmould technology for improved

comfort with a positive grip

1 x double-ended screwdriver bit


Voltage (V) 18No. of batteries supplied ≠0Charger supplied –Max. torque (Nm) 42Chuck capacity (mm) 10No load speed gear 1 (rpm) 0-350No load speed gear 2 (rpm) 0-1300Max. drilling wood (mm) 32Max. drilling steel (mm) 10Torque settings 24Weight with battery pack (kg) 1.7Supplied in –Article Number 5133001057EAN Code 4892210106292


Voltage (V) 18No. of batteries supplied 0Charger supplied −Impact rate (ipm) 0-4000Blow energy (J) 1.5No load speed gear 1 (rpm) 0-1000Max. drilling wood (mm) 16Max. drilling steel (mm) 13Max. drilling masonry (mm) 12Weight with battery pack (kg) 2.94Supplied in −Article Number 5133001058EAN Code 4892210108609

RAD1801M

18V Right Angle Drill

● 10mm keyless chuck● Variable speed, reverse and brake for total control● Automatic spindle lock for one-handed bit change● LED for illuminated work piece● Magnetic drill bit tray for easy storage and access to drill bits

1 x double-ended screwdriver bit


Voltage (V) 18No. of batteries supplied 0Charger supplied −Chuck capacity (mm) 10No load speed gear 1 (rpm) 0-1100Max. drilling wood (mm) 38Max. drilling steel (mm) 10Weight with battery pack (kg) 1.83Supplied in −Article Number 5133001167EAN Code 4892210118585

CRH1801M

18V SDS+ Hammer Drill

● Pneumatic hammer mechanism delivers 1.5J of impact energy ideal for drilling holes in stone and concrete

● SDS+ chuck for fast drilling and easy accessory bit changes

● Powerful 18V motor for maximum performance

● 2 modes for extra versatility (hammer drill, rotary drill)

● Non-hammer setting ideal for drilling holes in wood and metal

● Variable speed, forward and reverse for total control

360° Auxiliary Handle, Depth Stop






RID1801M

18V Impact Driver

● Powerful 220Nm of torque● Keyless 6.35mm (1⁄4˝) hex drive● Impact mechanism designed to drive long screw and

lag bolts● 3 x LED lights for better visibility● Die-cast front gear housing for durability● Variable speed, reverse and brake for total control

1 x impact bit, 1 x 5⁄8 inch socket adpator


Voltage (V) 18No. of batteries supplied 0Charger supplied −Max. torque (Nm) 220No load speed (rpm) 0-3200Weight with battery pack (kg) 1.63Supplied in −Article Number 5133001169EAN Code 4892210118608

BIW180M

18V Impact Wrench

● Up to 265Nm Torque (Max) for heavy duty bolt/nut driving

● Variable trigger speed for ultimate control● Keyless ½˝ Drive● Impact mechanism designed to drive long screws

and lag bolts● LED light for working in dimly lit areas● GripZone™ overmould technology for improved


½˝ to ¼˝ adaptor


Voltage (V) 18No. of batteries supplied 0Charger supplied −Max. torque (Nm) 265No load speed gear 1 (rpm) 0-3,000Impact rate (ipm) 0-3500Weight with battery pack (kg) 2.09Supplied in −Article Number 5133000214EAN Code 4892210108791

RMT1801M

18V Multi Tool

● A versatile multi purpose tool with both sanding and cutting heads● Quick change attachments for hassle free transition between sanding

and sawing ● LED for illuminated work piece● Variable speed for ultimate control across a

range of applications● Universal accessory adaptor makes the

product compatible with any brand of accessories

1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor


Voltage (V) 18No. of batteries supplied 0Charger supplied −Oscilation angle 3 DegreesOscilation rate (opm) 0-20,000Weight with battery pack (kg) 1.33Supplied in −Article Number 5133001633EAN Code 4892210120335






RWSL1801M

18V Circular Saw

● Large 45mm cutting depth at 90°● Ultra thin TCT Kerf blade reduces power drain and

increases cutting performance● Ideal for laminate worktops, boards and sheet material● Bevel capacity up to 50°● Spindle lock for easy blade change● Laser guide for accurate cutting

Hex key, 150mm TCT circular saw blade and edge guide


Voltage (V) 18No. of batteries supplied 0Charger supplied −Blade diameter (mm) 150Bore size (mm) 10No load speed (rpm) 0-4,700Max. cutting depth 45˚ (mm) 32Max. cutting depth 90˚ (mm) 45Bevel capacity (°) 50Weight with battery pack (kg) 2.93Supplied in −Article Number 5133001165EAN Code 4892210118561

RRS1801M

18V Reciprocating Saw

● Universal saw for cutting a variety of materials● Tool-less blade clamp for quick and easy blade changes● Variable speed and brake● 22mm stroke length● Anti vibration technology● Adjustable shoe increases blade life

1 x metal blade, 1 x wood blade


Voltage (V) 18No. of batteries supplied 0Charger supplied −Stroke length (mm) 22No load speed (rpm) 0-3100Max. cutting capacity wood (mm) 180Weight with battery pack (kg) 2.33Supplied in −Article Number 5133001163EAN Code 4892210118707

R18JS-0

18V Jigsaw

● 25mm stroke length and up to 3,000 strokes per minute give excellent cutting performance

● 1 handed speed control for easy speed adjustment to suit different applications

● 4 stage pendulum action for enhanced cutting performance● Tool-less blade clamp for quick and easy blade change● Lock on switch reduces fatigue● LED worklight illuminates the cut line● Easy base adjustment for 0° to 45° bevel settings

1 x 10 TPI wood blade, 1 x 14 TPI scrolling blade


Voltage (V) 18No. of batteries supplied 0Charger supplied −Stroke length (mm) 25No load stroke rate (spm) 1,100 - 3,000Max. cutting capacity wood (mm) 101Weight with battery pack (kg) 2.53Supplied in −Article Number 5133002158EAN Code 4892210128010

NEW

Ideal with:

Ideal with:

Flush cut blade available: RAK05JSBFC


R18N16G-016G Finish nailerThe finishing nailer is your best all-around nailer for indoor trim and similar jobs. This is used for mouldings around windows and doors, baseboards, chair rails, furniture & cabinets.

Applications:• Fencing• Architraves• Baseboards/Heavy Skirting Boards• Light skirting• Door Sets • Staircases • Tile battens • Panelling Mouldings• Dado rails

R18N18G-018G Brad nailerThe brad nailer is lightweight and usually used for precision work and for smaller wood projects, upholstery. While the brads are small, and leave a fairly tiny hole to fill, they hold really well.

Applications:• Trellis• Architraves• Light skirting• Beading• Panelling• Dado rails

New from Ryobi®

Introducing Air StrikeAirstrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose.

R18N18G-0

Power 18VNail length 16 – 51mmFiring Modes Bump & SequentialAngle or Straight straight

R18N16G-0

Power 18VNail length 19 – 65mmFiring Modes Bump & SequentialAngle or Straight straight

UP TO

60 NAILS PERMINUTE

14 | NEW FROM RYOBI®






R18N18G-0

18V 18 Gauge Nailer● AirStrike™ Technology provides cordless convenience, eliminating the

need for a compressor and bulky air hose● Super compact cordless nail gun requires no compressor, air hoses,

gas cartridges or maintenance● 2 firing modes, sequential mode for precision and bump mode for rapid

fastening● Fires 18 Gauge (1.2mm head) nails from 16 to 51mm long● Maximum fire rate of up to 60 nails per minute● Fires up to 600 nail per charge with RB18L15 and 1600 with RB18L40

(based on 50mm nails into pine)● Grip-Light technology engages twin LED's by grasping the handle● Tool-less depth-of-drive adjustment helps protect work surface and

allows proper setting of nail heads

500 x 32mm nails, 2 x no mark shoes, reversible belt hook


Voltage (V) 18No. of batteries supplied 0Charger supplied −Magazine capacity brads 105Nail type (mm) 1.2Weight with battery pack (kg) 2.93Article Number 5133002093EAN Code 4892210128058

Voltage (V) 18No. of batteries supplied 0Charger supplied −Magazine capacity brads 100Nail type (mm) 1.6Weight with battery pack (kg) 3.2Article Number 5133002222EAN Code 4892210128898

R18AG-0

18V Angle Grinder

● 3 position handle for easy grinding or cutting● Tool-less wheel guard adjustment● Spindle lock for easy accessory changing● GripZone over-mould for positive control

Auxiliary handle, wrench,wheel guard, 1 x grinding disc


Voltage (V) 18No. of batteries supplied 0Charger supplied −Bore size (mm) 22No load speed (rpm) 7500Wheel size (mm) 115Weight with battery pack (kg) 2.58Supplied in −Article Number 5133001903-DSEAN Code 4892210123657

Ideal with:

NEW

NEWR18N16G-0

18V 16 Gauge Nailer● AirStrike™ Technology provides cordless convenience, eliminating the

need for a Nosy compressor, bulky air hose or expensive gas cartridges● Fires 16 Gauge (1.6mm) nails from 19 to 65mm long● 2 firing modes, full sequential mode for precision and contact

actuation mode for rapid fastening● Grip-Light technology engages LED by grasping the handle● Tool less depth of drive adjustment helps protect work surface and

allows proper setting of nail heads● Dry-fire lockout prevents the tool working without nails loaded● Tool-less jam release for easy removal of clear nails● Low nail indicator to quickly and easily see when it is time to re-load● Belt hook mounts left or right side for added convenience

Included as standard500 x 50mm nails, 2 x no mark shoes, reverseable belt hook






EMS190DCL

18V Mitre Saw

● Aluminium base provides a good cutting surface

● Exactline laser guide for improved accuracy

● Gripzone over mould technology for an improved positive grip

● Pre-select mitre angles at 0, 15, 22.5, 30 and 40≠

● Up to 100 cuts in 100 x 25mm white pine (using fully charged 18V 4.0Ah battery)

1 x 24 TCT blade, 1 x clamp, dust bag, wrench


Voltage (V) 18No. of batteries supplied 0Charger supplied −Blade diameter (mm) 190Mitre capacity left (˚) 45Mitre capacity right (˚) 45Bevel capacity left (˚) 45Weight with battery pack (kg) 7.43Supplied in −Article Number 5133000932EAN Code 4892210116895

High pressure hose, high volume hose, 3 x air accessories


Voltage (V) 18No. of batteries supplied 0Charger supplied −

Hose length (m)High pressure hose 711mm,

High volume hose 756mm

Max. pressure (bar) 10.3bar, 150psiWeight with battery pack (kg) 1.71Supplied in −Article Number 5133001834EAN Code 4892210122780

LTS180M

18V Tile Saw

● Powerful 18V motor cuts through ceramic, granite, marble and masonry● Steel base includes oversized knobs for easy adjustments● 102mm (4˝) continuous rim diamond cutting wheel offers

precision cutting and prevents chipping● Spindle lock for easy cutting wheel changes● GripZone™ overmould technology for improved

grip and reduced vibration● Wrench storage● Diamond wheel included● Water bottle included

Hex key, water bottle


Voltage (V) 18No. of batteries supplied 0Charger supplied −No load speed (rpm) 4500Wheel size (mm) 102Arbor size (mm) 16Max. cutting depth 45˚ (mm) 16Max. cutting depth 90˚ (mm) 22Weight with battery pack (kg) 2.6Supplied in −Article Number 5133000417EAN Code 4892210110671

Ideal with:

R18I-0

18V Inflator

● Fast inflation of tyres and large inflatables● On board accessory storage● Quick deflation mode● Digital readout with auto shut off when

desired pressure is reached● Wrap around hose storage






CRO180M

18V 125mm Random Orbit Sander

● Sanding pad size: 125mm (5") diameter● Lock on switch for continuous use● Quick-fix hook and loop sanding sheet attachment● Body grip design for increased comfort● GripZone™ overmould technology for improved comfort

with a positive grip

3 x sanding pads


Voltage (V) 18No. of batteries supplied 0Charger supplied −Oscilation rate (opm) 10000Sanding pad size (mm) 125 (5˝) diameterDiameter of orbit (mm) 2Weight with battery pack (kg) 1.71Supplied in −Article Number 5133000197EAN Code 4892210109163

CCC1801M

18V Corner Sander

● Sanding pad size: 140 x 100mm● Lock on switch for continuous use● Quick-fix hook and loop sanding sheet attachment● GripZone™ overmould technology for improved comfort


Assortment of sanding papers


Voltage (V) 18No. of batteries supplied 0Charger supplied −No load speed (rpm) 11000Weight with battery pack (kg) 1.26Supplied in −Article Number 5133001045EAN Code 4892210109170

CPL180M

18V Planer

● Chamfering groove in die-cast front shoe for added precision

● Positive depth adjustment 0 - 0.4mm● Additional front handle for greater control● Side fence included for precision planing● DustTech™ Integrated dust technology

for maximum pick-up efficiency● GripZone™ overmould technology for

improved comfort with a positive grip

side fence, dust bag, wrench, 2 x reversible TCT blades


Voltage (V) 18No. of batteries supplied 0Charger supplied −Planing width (mm) 50Planing depth (mm) 0-0.4Rebate depth (mm) 13No load speed (rpm) 10,000Weight with battery pack (kg) 2.13Supplied in −Article Number 5133000195EAN Code 4892210109149





CCG1801M

18V Caulking Gun

● 200+ tubes of latex per charged battery● Switch lock helps prevent accidental start-ups● Variable speed adjustment lever

for flow control● Easy release manual push

rod for quick reloading● Durable gears and carriage frame help ensure tool longevity● On-board puncture tool to brake tube seal if needed● GripZone™ overmould technology for improved comfort


None


Voltage (V) 18No. of batteries supplied 0Charger supplied −No load speed high (mm/s) 6No load speed low (mm/s) 1Max. ouput force (kg) 225Weight with battery pack (kg) 2.13Supplied in −Article Number 5133000192EAN Code 4892210109200

CHV182M

18V Hand Vac

● Cleans up dry spills● Go-anywhere, fast cleaner● Quick-change replacement filter● Easy-clean dust cup● GripZone™ overmould technology for improved


Crevice and brush attachment


Voltage (V) 18No. of batteries supplied 0Charger supplied −Container capacity (ml) 173Weight with battery pack (kg) 1.39Supplied in −Article Number 5133001030EAN Code 4892210106322

CDR180M

18V MP3 Compatible Radio

● Auxiliary jack - compatible with MP3, CD players, etc● Convenient mode selector from FM to auxiliary input● On/off switch via volume control dial● 10 preset stations● Manual and automatic tuning● Fold out flexible antenna● Low battery indicator● 90mm speaker

2 x AAA batteries


Voltage (V) 18No. of batteries supplied 0Charger supplied −Speaker diameter (mm) 90Speaker output (W) 3Frequency (Hz) 87.5 - 108 FMWeight with battery pack (kg) 1.05Supplied in −Article Number 5133000614EAN Code 4892210114051





Pivoting

head

RFL180M

18V Flashlight

● Pivoting head for perfect illumination for all tasks● Flat base for added stability● Soft touch trigger for comfort● 4000 Lux for high illumination

Included as standardSpare bulb

Voltage (V) 18No. of batteries supplied 0Charger supplied −Bulb type HalogenWeight with battery pack (kg) 0.72Article Number 5133001637EAN Code 4892210120199

P620

18V Speed Sprayer

● The sprayer's flexible intake tube lets you spray at any angle and use the last remaining paint in the container minimizing wastage

● Innovative and patented delivery system also minimizes the need for dilution

● Choose between three spray patterns, horizontal, vertical or round, to provide you with the best coverage whilst minimizing overspray

● Quick lock container for easy set-up● Ideal for exterior walls, garage doors and

outbuildings● Suitable for use with any brand of paint● GripZone™ overmould technology for

improved comfort with a positive grip

Included as standardVertical tip, horizontal fan tip, viscosity & measuring cup, cleaning kit

Voltage (V) 18No. of batteries supplied 0Charger supplied −Container capacity (ml) 1000Paint coverage sprayer (m²/min) 10Flow rate (l/h) 20Weight with battery pack (kg) 2.36Supplied in −Article Number 5133000155EAN Code 4892210110589



50L

40cm

20mm-70mm 2hr

4.0Ah

x 2

RLM18X40H240

18V Lithium Fusion™ Lawnmower

● The performance of 36V as the Fusion creates 36V performance through two 18V batteries

● Aerodynamically optimised cutting deck with 40cm metal blade for excellent cutting and mulching performance

● Vertebrae™ handle design for extended fatigue-free use with drive-by-wire built-in controls

● Assembles in 5 minutes or less out of the box● Quick-release fold-down handle and collapsible grass catcher

which stores flat on top of mower● As part of the 18V ONE+™ system, the battery is compatible with over

35 tools for the home and garden

4.0Ah 18V battery and charger, 50 litre hard top grass bag, mulching plug


Voltage (V) 36Battery pack capacity (Ah) 4.0No. of batteries supplied 2Decksize (cm) 40Blade speed (rpm) 3550Charger supplied 2 hrDrive mechanism PushMulching capable YesWeight with battery pack (kg) 20Article Number 5133002099EAN Code 4892210820815

NEW


18mm50cm 18 Ah

1hr

25–30cm XXcm 1.6mm

RHT1851R15

18V Hedge Trimmer

● Excellent run time, ideal for gardens of up to 300 square metres in size● Powerful cutting performance due to the high-torque motor● Lightweight and perfectly balanced unit thanks to the battery's central

location in the tool● Rotating rear handle offers ease of use in multiple positions● Excellent cutting quality through precision diamond ground blade● Anti-jamming system prevents accidental blocking● HedgeSweep™ attachment offers easy removal of clippings● As part of the 18V ONE+™ system, the battery is compatible with over

35 tools for the home and garden

Voltage (V) 18Battery pack capacity (Ah) 1.5No. of batteries supplied 1Charger supplied 60 minMax. cutting capacity (mm) 18Blade speed (rpm) 2700Blade length (cm) 50Battery type Li-ionWeight with battery pack (kg) 3.15Article Number 5133002110EAN Code 4892210820754

Included as standard1.5Ah 18V battery and charger, auto feed spool, HedgeSweep™ attachment, blade sheath

NEW

NEW

Included as standardAuto feed spool

OLT1831S

18V Line Trimmer

● Powerful, easy cutting with 1.6mm cutting line and a 30cm cut capacity

● Vertebrae™ design for improved comfort during use● EasyEdge™ feature offers quick transition between edging and

trimming modes● Auto feed line advance for added convenience● This line trimmer is sold as a bare tool, allowing you to build on your

ONE+™ collection without spending additional money on batteries and chargers with each tool purchase

Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied 0Charger supplied –Cutting path width (cm) 25-30Cutting line diameter (mm) 1.6Line feed system Auto feedWeight with battery pack (kg) 2.14Article Number 5133002162EAN Code 4892210821195


ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS | 21



25cm XXcm 1.6mm 18 Ah

3hr

25–30cm XXcm 1.6mm

45 min

1.3Ah 18V battery and charger, auto feed spool


Voltage (V) 18Battery pack capacity (Ah) 1.3No. of batteries supplied 1Charger supplied 3 hrLine feed system Auto feedCutting path width (cm) 25Cutting line diameter (mm) 1.6Weight with battery pack (kg) 1.65Article Number 5133001807EAN Code 4892210818430

RLT1825Li

18V Line Trimmer

● Two handle design for improved user comfort● EasyEdge for quick transition to edging mode● 25cm cutting path for efficient cutting rate● Auto-feed line advance for added convenience● As part of the 18V ONE+™ system, the battery is compatible

with over 35 tools for the home and garden

RLT1830H13

18V Hybrid Line Trimmer

● Innovative 18V Hybrid power, offers the choice of seamlessly changing between corded and cordless power in the same tool

● Powerful cutting with 1.6mm line and adjustable cutting width from 25-30cm for great versatility and run time optimisation

● Vertebrae™ design for improved comfort during use● EasyEdge™ feature allows the user to quickly transition

between edging and trimming modes● Auto feed line advance for added convenience● Battery charges in 45 minutes● As part of the 18V ONE+™ system, the battery is compatible

with over 35 tools for the home and garden

Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied 1Charger supplied 45 minCutting path width (cm) 25-30Cutting speed (rpm) 9000-8000Line feed system Auto feedWeight with battery pack (kg) 2.8Article Number 5133002103EAN Code 4892210820792

1.3Ah 18V battery and charger, auto feed spool, 8m cable


NEW



22mm55cm

16mm50cm

24 | ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS

NEWOHT1855R

18V Hedge Trimmer

● Powerful cutting performance due to the high-torque motor● Lightweight and perfectly balanced unit thanks to the battery's central

location in the tool● Rotating rear handle offers ease of use in multiple positions● Excellent cutting quality through precision laser cut, diamond ground blade● Anti-jamming system prevents accidental blocking● HedgeSweep™ attachment included offers easy removal of clippings● Auto feed line advance for added convenience● This hedge trimmer is sold as a bare tool, allowing you to build on your


Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied 0Charger supplied −Max. cutting capacity (mm) 22Blade speed (rpm) 2700Blade length (cm) 55Battery type −Weight with battery pack (kg) 2.8Article Number 5133002161EAN Code 4892210821249

HedgeSweep™ attachment, blade sheath


4-positi

on articulating head

OHT1850X

18V Long Reach Hedge Cutter

● 4-position articulating head and rotating rear handle for optimum reach in all cutting applications

● Central trigger for easy use in extended reach position● HedgeSweep debris sweeper for easy removal of clippings● Auto feed line advance for added convenience● This long reach hedge cutter is sold as a bare tool, allowing you to build

on your ONE+™ collection without spending additional money on batteries and chargers with each tool purchase

Included as standardHedgeSweep™ blade sheath

Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied ≠0Charger supplied –Max. cutting capacity (mm) 16Blade speed (rpm) 2400Blade length (cm) 50Weight with battery pack (kg) 3.73Article Number 5133001249EAN Code 4892210815439




20cm

193km/h

OPP1820

18V Pole Saw

● In-line motor for pruning in tight places● Extendable shaft for a reach of up to 4 meters● 30 degree angled cutting head for safer and easy cutting● Auto feed line advance for added convenience● This pole saw is sold as a bare tool, allowing you to build on your


Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied ≠0Charger supplied –Chain bar length (cm) 20Chain speed (m/s) 5Weight with battery pack (kg) 4.1Article Number 5133001250EAN Code 4892210815446

Included as standardBar and chain oil, scabbard, strap

OBL1802

18V Blower

● Accepts 18V ONE+™ NiCad or Lithium-Ion batteries● Powerful but quiet blower / sweeper● 120mph (193km/h) airflow speed● Light weight for easy operation● Ergonomic flick switch● High speed nozzle design with debris scraper● GripZone™ overmould for comfortable grip● Auto feed line advance for added convenience● This blower is sold as a bare tool, allowing you to build on your


1 x nozzle


Voltage (V) 18Required battery capacity (Ah) 1.5AhNo. of batteries supplied 0Charger supplied −Airflow speed (l/min) 120mph (193km/h)Weight with battery pack (kg) 1.6Article Number 5133000731EAN Code 4892210812605






RCD12011L

12V Drill Driver

● 10mm keyless chuck● 22 torque settings for perfect screwdriving every time● Light and compact - ideal for use throughout the house● LED to illuminate the work piece● Fuel gauge to indicate power levels

Included as standard1 x double ended bit, and charger

Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minMax. torque (Nm) 25Chuck capacity (mm) 10No load speed gear 1 (rpm) 0-715Max. drilling wood (mm) 25Max. drilling steel (mm) 10Torque settings 22Weight with battery pack (kg) 1.08Supplied in Tool bagArticle Number 5133001157EAN Code 4892210118509

1x

BATTERY KIT





12V TOOLS | 27

RMT12011L

12V Multi tool

● A versatile and compact mulit purpose tool with both sanding and cutting heads● Quick change attachments for hassle free transition between sanding and sawing● LED to illuminate the work piece● Fuel gauge to indicate power levels● Universal accessory adaptor makes

the product compatible with any brand of accessories

1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor, and charger

Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minOscilation angle 3 DegreesOscilation rate (opm) 0-20,000Weight with battery pack (kg) 1.07Supplied in Tool bagArticle Number 5133001772EAN Code 4892210121431

1x

BATTERY KIT

R12PS-L13S

12V Palm Sander

● MicroFiltration Integrated dust technology system for maximum pick up efficiency

● Unique integrated finger to access hard to reach places● Triangular pad design for sanding up to the edge in tight corners● Light and compact design● fuel gauge to indicate power levels



6x finger sanding sheets, 3x delta sanding sheets, and charger

Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minNo load speed (rpm) 20,000Diameter of orbit (mm) 1.2Sanding pad size (mm) 124 CM2Weight with battery pack (kg) 0.76Supplied in Tool bagArticle Number 5133002239EAN Code 4892210129215

1x

BATTERY KIT

RRS12011L

12V Multi Purpose Saw

● 2-in-1 saw with inter-changeable blade to enable the saw to be used in either reciprocating or jigsaw modes, making it ideal for a range of tasks

● Variable speed for optimum control in all applications● LED to illuminate the work piece● Fuel gauge to indicate power levels● Safety lock off switch to avoid

accidental starting

Included as standard1 x wood blade, 1 x metal blade, 1 x jigsaw blade, and charger

Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minNo load speed (rpm) 0-3200Stroke length (mm) 13Max. cutting capacity wood (mm) 60Weight with battery pack (kg) 1.17Supplied in Tool bagArticle Number 5133001161EAN Code 4892210118523

1x

BATTERY KIT



CSD4130GN

4V Lithium-Ion Screwdriver

● 12 Torque settings● LED light for working in dimly lit areas● Overmould switch for added comfort● GripZone™ overmould technology for improved comfort with

a positive grip● Secure QuickChange™ chuck with automatic spindle lock for

one handed bit changing● One screwdriver included per product

Included as standardGripcase with 30 screwdriver bits, and charger

Voltage (V) 4No. of batteries supplied 1Charger supplied 10 hrMax. torque (Nm) 5Tool reception 1⁄4˝ HexTorque settings 12Weight with battery pack (kg) 0.47Supplied in KitboxArticle Number 5133001037EAN Code 4892210108234

4V TOOLS | 29

CSD4107BG

4V Lithium-Ion Screwdriver

● 12 Torque settings● LED light for working in dimly lit areas● Overmould switch for added comfort● GripZone™ overmould technology for improved comfort with a positive

grip● Secure QuickChange™ chuck with automatic spindle lock for one handed

bit changing

Included as standard6 piece bit set, and charger

Voltage (V) 4No. of batteries supplied 1Charger supplied 10 hrMax. torque (Nm) 5No load speed gear 1 (rpm) 180Tool reception 1⁄4˝ HexTorque settings 12Weight with battery pack (kg) 0.47Supplied in Tool bagArticle Number 5133000605-DSEAN Code 5034716008765


30 | BATTERY & CHARGER SUMMARY

BATTERY & CHARGER OPTIONS18V LITHIUM-ION COMPACT BATTERIES

18V LITHIUM-ION BATTERIES & CHARGER KITS

Specification

Description

System

Battery Chemistry

Nr. Code EAN Code

Specification

Description

System

Battery Chemistry

Nr. Code EAN Code

RB18L13

1 x 18V (1.3Ah) Lithium-ion Battery

5133001904 4892210124074

RB18L15


5133001905 4892210124081

RB18L40


5133001907 4892210124104

RBC18L13

1 x 18V (1.3Ah) Lithium-ion Battery & Super Charger

5133001909 4892210124166

RBC18LL13


5133002065 4892210126870

RBC18L15


51330019114892210124180


BATTERY & CHARGER SUMMARY | 31

CHARGERS

BCL14181H

Super Charger for both Lithium-ion & NiCad Batteries

51330011284892210117984

Specification

Description

System

Battery Chemistry

Nr. Code EAN Code

BCS618

6 Port Battery Main tenance System suitable for Lithium- ion & NiCad Batteries

51330010334892210106001

12V BATTERIES

Specification

Description

System

Battery Chemistry

Nr. Code EAN Code

BSPL1213

1 x 12V (1.3Ah) Battery

5133001732 4892210120687


CORDED POWER TOOLS

Percussion Drills & Rotary Hammer Drill 33 – 34Angle Grinders 34 – 35Saws 35 – 36Multi Tool 37Sanders, Planers, Router & Heat Gun 37 – 40Mitre Saws / Table Saw 40 – 41Work Benches 42


RPD1200-K

1200W Percussion Drill

● Variable speed forward & reverse for total control● Compact & lightweight for easy drilling● GripZone™ overmould for positive grip and

improved comfort● Metal gear housing● Metal chuck with auto-spindle lock● 2-Speed● LED

360° Auxiliary handle, depth stop


Power input (W) 1200Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-1,200No load speed gear 2 (rpm) 0-3,200percussion rate gear 1 0-19,200percussion rate gear 2 0-51,200Max. drilling wood (mm) 25/50Max. drilling steel (mm) 8/16Max. drilling masonry (mm) 18/22Weight (kg) 3.15Supplied in KitboxArticle Number 5133002068EAN Code 4892210126771

RPD800-K


● Variable speed forward & reverse for total control● Compact & lightweight for easy drilling● Gripzone™ overmould for positive grip and

improved comfort● Single sleeve (auto spindle lock) chuck● LED



Power input (W) 800Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-3,000Max. percussion rate (bpm) 0-51,000Max. drilling wood (mm) 34Max. drilling steel (mm) 13Max. drilling masonry (mm) 16Weight (kg) 1.8Supplied in KitboxArticle Number 5133002019EAN Code 4892210125903

NEW

NEW

NEW

RPD500-G


● The most compact percussion drill in its class - up to 30% lighter than competition

● Variable speed forward & reverse for total control

● GripZone™ overmould for positive grip and improved comfort



Power input (W) 500Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-3,000percussion rate gear 1 0-50,000Max. drilling wood (mm) 25Max. drilling steel (mm) 13Max. drilling masonry (mm) 13Weight (kg) 1.6Supplied in −Article Number 5133002244EAN Code 4892210129284

PERCUSSION DRILLS | 33


180°

ERH710RS

710W SDS-Plus Rotary Hammer Drill

● Variable speed forward & reverse for total control● Rotation stop for light chiselling● Hammer stop for drilling into wood,

steel, ceramics and screwdriving applications

● Electronic variable speed, reverse and brake for total control

● Safety clutch to protect operator if bit jams

● Livetool Indicator™ glows blue when plugged into the power supply



Power input (W) 710Chuck type SDSNo load speed gear 1 (rpm) 0-1,100Max. percussion rate (bpm) 0-4,000Blow energy (J) 2Max. drilling wood (mm) 32Max. drilling steel (mm) 13Max. drilling masonry (mm) 24Weight (kg) 3Supplied in KitboxArticle Number 5133000527EAN Code 4892210111593

EAG2000RS

Large Angle Grinder

● Full length trigger switch with overmould● 180° multi-directional rotating back handle for

improved comfort and control● Tool-less wheel guard for quick and easy

adjustment● Two position Auxiliary Handle with

wrench storage● Spindle Lock for easy wheel

changing● Livetool Indicator™ glows blue

when plugged into the power supply

Wrench (x1), wheel guard (x1), auxiliary handle, grinding wheel (x1)


Power input (W) 2000Disc diameter (mm) 230Bore size (mm) 22Spindle size M14No load speed (rpm) 6,000Weight (kg) 6.0Supplied in KitboxArticle Number 5133000551EAN Code 4892210111814

NEW

EAG750RS

Small Angle Grinder

● Lock on switch for continued use● Tool-less wheel guard for quick and

easy adjustment● Two position Auxiliary Handle● Spindle Lock for easy wheel changing● Livetool Indicator™ glows blue

when plugged into the power supply

Grinding Wheel (x1), Wrench (x1), Wheel Guard, Auxiliary Handle


Power input (W) 750Disc diameter (mm) 115Bore size (mm) 22Spindle size M14No load speed (rpm) 11,000Weight (kg) 2.4Supplied in −Article Number 5133000543EAN Code 4892210111753

34 | ROTARY HAMMER DRILL & ANGLE GRINDERS


EAG600RS

Small Angle Grinder

● Lock on switch for continued use● Powerful 600W motor with a high torque

gear box● 2 position handle for left or right handed

operation● Spindle lock and adjustable guard for

easy wheel and accessory changing

Grinding wheel (x1), wrench (x1), wheel guard, auxiliary handle


Power input (W) 600Disc diameter (mm) 115Bore size (mm) 22Spindle size M14No load speed (rpm) 12,000Weight (kg) 2.0Supplied in −Article Number 5133001153EAN Code 4892210118424

RJS1050-K

680W Jigsaw

● Most visible cut line delivered by slim profile, LED and AIRFORWARDS to remove dust

● High accuracy achieved through PRO STROKE mechanism, 4-stage pendulum action and LINEASSIST

● SPEEDCONTROL thumb activated speed regulation● SURELOCK blade clamp with colour coding makes it

clear when the blade is fitted correctly● FLUSHCUT blade allows user to cut up to the guard● Retractable fin helps straight line accuracy

x1 wood blade, x1 flush cut blade, x1 dust port


Power input (W) 680Stroke length (mm) 23No load speed (rpm) 500-3,100Max. cutting capacity wood (mm) 105Max. cutting capacity steel (mm) 12Weight (kg) 2.2Supplied in KitboxArticle Number 5133002220EAN Code 4892210128362

NEW

NEWRJS750-G

500W Jigsaw

● Most visible cut line delivered by slim profile and AIRFORWARDS to remove dust

● High accuracy achieved through PRO STROKE mechanisms and LINEASSIST

● Quick Lock one finger blade clamp allows user to change blade easily

● Most compact and comfortable jigsaw wtih ergonomic handle and detachable vacuum port

1 x wood blade, 1 x hex key, x 1 dust port


Power input (W) 500Stroke length (mm) 19No load speed (rpm) 0-3,000Max. cutting capacity wood (mm) 75Max. cutting capacity steel (mm) 6Weight (kg) 1.8Supplied in −Article Number 5133002216EAN Code 4892210128300

ANGLE GRINDER & JIGSAWS | 35




ERS80VHG

Reciprocating Saw

● Variable speed trigger for ultimate control● Metal gear box for strength and durability● Tool-less, fast and easy blade change● Livetool Indicator™ glows blue

when plugged into power supply

3 x reciprocating blades


Power input (W) 800Stroke length (mm) 28No load speed (rpm) 500 – 3,000Max. cutting capacity wood (mm) 150Max. cutting capacity aluminium (mm) 12Max. cutting capacity steel (mm) 10Weight (kg) 2.8Supplied in KitboxArticle Number 5133000368EAN Code 48922101112316

RWS1250-G

66mm Circular Saw

● Compact, lightweight and ergonomic design for comfortable, repetitive cutting

● Adjustable base for 0°-45° bevel settings● Adjustable depth setting for efficient cutting● Onboard wrench storage● Livetool Indicator™ glows blue when

plugged into power supply

1 x 20-tooth TCT blade, parallel fence, wrench


Power input (W) 1250Blade diameter (mm) 190Bore size (mm) 16Max. cutting depth 90˚ (mm) 66Max. cutting depth 45˚ (mm) 50Bevel capacity (°) 45°No load speed (rpm) 5,000Weight (kg) 3.7Supplied in −Article Number 5133002243EAN Code 4892210129314

36 | RECIPROCATING SAW & CIRCULAR SAWS

EWS1150RS

55mm Circular Saw

● Adjustable base for 0° to 45° bevel settings● Spindle lock for easy blade change● Adjustable depth setting for efficient cutting● Onboard wrench storage● Livetool Indicator™ glows blue when

plugged into power supply

12-tooth TCT blade, parallel fence


Power input (W) 1150Blade diameter (mm) 170Bore size (mm) 20Max. cutting depth 90˚ (mm) 55Max. cutting depth 45˚ (mm) 38Bevel capacity (°) 45°No load speed (rpm) 5,600Weight (kg) 4.7Supplied in −Article Number 5133000553EAN Code 4892210111470


RMT200-S

200W Multi Tool

● A versatile multi purpose tool with both sanding and cutting heads

● Quick change attachments for hassle free transition between sanding and sawing

● Variable speed for ultimate control across a range of applications

● GripZone™ overmould for a positive grip and improved comfort

1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor


Power input (W) 200Oscilation rate (opm) 10,000-20,000Oscilation angle 3 DegreesWeight (kg) 1.6Supplied in Tool bagArticle Number 5133001819EAN Code 4892210122636

ROS300

Random Orbit Sander

● Powerful 300W motor● Large 2.4mm random orbital base for high levels of

stock removal● Random orbital action for high levels of stock

removal● Compact palm grip handle for added comfort● Cyclonic action dust box for effective dust

collection● Livetool Indicator™ glows blue when plugged into

power supply

5 x quick fix sanding sheets


Power input (W) 300No load speed (rpm) 7,000-12,000Diameter of orbit (mm) 2.4Sanding pad size (mm) 125Weight (kg) 1.7Supplied in −Article Number 5133001145EAN Code 4892210118332

UNIVERSAL

EMS180RV

Multi Pad Sander

● DustTech™ Integrated dust technology system for maximum pick-up efficiency

● 3 unique operational base options (Delta, 1⁄3 sheet & finger)● Unique Integrated Finger to access hard to reach

places● Triangular pad design for sanding up to the edge

in tight corners● 1⁄3 Sheet option to sand large areas quickly

(use either hook and loop or standard paper in clamp)

● Livetool Indicator™ - Glows blue when plugged into the power supply

5 x delta hook & loop pads, 5 x third-sheet hook & loop pads, 5 x finger hook & loop pads


Power input (W) 180Oscilation rate (opm) 0–12,000Diameter of orbit (mm) 2Sanding pad size (mm) -Weight (kg) 1.4Supplied in Tool bagArticle Number 5133000531EAN Code 4892210111692

3-in-1

WOODWORKING | 37


EPS80RS

Palm Sander

● Compact palm grip handle for added comfort● DustTech™ Integrated dust technology system

for maximum pick-up efficiency● Integrated Finger to access hard to reach places● Triangular pad design for sanding up to the edge

in tight corners● Livetool Indicator™ glows blue when plugged

into the power supply

5 x delta sander hook & loop pads, 5 x finger hook & loop pads


Power input (W) 80Oscilation rate (opm) 12,000Diameter of orbit (mm) 1.6Sanding pad size (mm) 99 x 149Weight (kg) 0.9Supplied in Tool bagArticle Number 5133000529EAN Code 4892210111678

38 | WOODWORKING

ESS280RV1⁄3 Sheet Sander

● Powerful cyclonic action technology for maximum dust pick-up efficiency

● Quick-fix hook and loop sanding sheet attachment● Clamping Sheet attachment to maximise sanding

paper choice● Low Vibration for smoother control and finishing● Variable Speed for total sanding control● Livetool Indicator™ glows blue when plugged


2 x 60, 1 x 100 and 1 x 150 grit sanding sheets


Power input (W) 280Oscilation rate (opm) 7,000-12,000Diameter of orbit (mm) 2Sanding pad size (mm) 93 x 185Weight (kg) 1.7Supplied in Tool bagArticle Number 5133000535EAN Code 4892210111739

ESS200RS1⁄3 Sheet Sander

● Powerful cyclonic action technology for maximum dust pick-up efficiency

● Quick-fix hook and loop sanding sheet attachment

● Clamping Sheet attachment to maximise sanding paper choice

● Low Vibration for smoother control and finishing

● Livetool Indicator™ - Glows blue when plugged into the power supply

2 x 60, 1 x 100 and 1 x 150 grit sanding sheets


Power input (W) 200Oscilation rate (opm) 12,000Diameter of orbit (mm) 2Sanding pad size (mm) 93 x 185Weight (kg) 1.5Supplied in −Article Number 5133002245EAN Code 4892210129277


WOODWORKING | 39

EOS2410NHG1⁄4 Sheet Palm Sander

● Powerful 240W motor● Quick-fix hook and loop sanding sheet attachment

with paper clamps● Die-cast aluminium base for strength and

durability● Overmould ON/OFF switch for durability and

ease of use● Compact palm grip handle for added comfort● DustTech™ Integrated dust technology system

for maximum pick-up efficiency● Livetool Indicator™ glows blue when plugged

into power supply

2 x 60, 2 x 100 and 2 x 150 grit sanding sheets, paper punch pad, dust bag


Power input (W) 240Oscilation rate (opm) 14,000Diameter of orbit (mm) 1.6Sanding pad size (mm) 110 x 114Weight (kg) 1.6Supplied in KitboxArticle Number 5133000349EAN Code 4892210111081

EBS800V

76mm (3˝) Belt Sander

● Powerful 800W motor with variable speed for rapid stock removal

● Quick change belt system for easy tracking set-up

● Cyclonic action dust box for effective dust collection

● 4 position adjustable handle● Livetool Indicator™ glows blue when plugged

into power supply

1 x 60 grit sanding sheet, 1 x 100 grit sanding sheet, 1 x 120 grit sanding sheet, 2 x G-clamps, sanding frame, stopper, sanding frame


Power input (W) 800Belt speed (rpm) 150-320Belt width (mm) 76Sanding pad size (mm) 76 x 533Weight (kg) 3.3Supplied in KitboxArticle Number 5133001147EAN Code 4892210118295

EPN7582NHG

750W Planer

● 3 chamfering grooves (0.5,1,1.5mm) in die-cast front shoe for added precision

● Double sided fence for precision planing● Overmould dust extraction switch for left

or right port● Full length trigger with overmould for

greater control● DustTech™ Integrated dust technology

system for maximum pick-up efficiency● Livetool Indicator™ glows blue when plugged

into power supply

2 x TCT blades, dust bag, side fence, wrench


Power input (W) 750Planing depth (mm) 2Planing width (mm) 82Rebate depth (mm) 0-12No load speed (rpm) 16,000Weight (kg) 3.2Supplied in KitboxArticle Number 5133000353EAN Code 4892210111128


ERT1400RV

6.35mm (1⁄4˝) 1400W Router

● Fine height adjustment for precision control and repeatable cutting

● Height adjustment control in table mode● Powerful 1,400 Watt motor with soft start and variable

speed to give user ultimate control● Transparent chip deflector allows you to safely see line

of cut● Livetool Indicator™ - Glows blue when plugged into the

power supply

Parallel guide, template guide, dust port, 1 x 6mm collet, 1 x 6.35mm collet, 1 x 8mm collet, 1 x wrench, 1 x parallel guide, 1 x template guide


Power input (W) 1400No load speed (rpm) 14,000 – 31,500Collet capacity (mm) 6, 6.35 & 8Plunge capacity (mm) 55Weight (kg) –Supplied in KitboxArticle Number 5133000555EAN Code 4892210111838

EHG2000

Heat Gun

● Removable front heat shield allows easy access to change accessories

● Overheat protection sensor● Two air flow settings● Two heat settings 60 / 600°C● Convenient hanging hook


Power input (W) 2000Air flow (l/min) 250/500 l/minWeight (kg) 0.7Supplied in −Article Number 5133001138EAN Code 4892210118158

2 x nozzles

EMS254L

254mm (10˝) Compact Slide Mitre Saw with Laser

● Exactline Laser Technology™ for cutting accuracy● 2 LED's for maximum work area illumination● Forward sliding bars allow users to work up against a wall● Easily stored and transported thanks to ultra compact design● Powerful 2000 Watt motor, producing 4.500rpm● Extra wide side extensions to support large timber● 50 degree left and right mitre capacity

Included as standard24-tooth TCT blade, extensions, 1 x clamp, dust bag, wrench

Power input (W) 2000Blade diameter (mm) 254Blade type 48-tooth TCTNo load speed (rpm) 4,500Mitre capacity left (˚) 50Mitre capacity right (˚) 50Bevel capacity left (˚) 47Bevel capacity right (˚) 2Weight (kg) 16.2Supplied in −Article Number 5133001203EAN Code 4892210119155

Max. cutting capacity: 90° mitre / 90° bevel 300 x 90mm 90° mitre / 45° bevel 300 x 58mm 45° mitre / 90° bevel 200 x 90mm 45° mitre / 45° bevel 200 x 58mm

40 | WOODWORKING


EMS216L

216mm (71⁄5˝) Compact Slide Mitre Saw with Laser

● Exactline Laser Technology™ for cutting accuracy● 2 LED’s for maximum work area illumination● Forward sliding bars allow users to work up

against a wall● Easily stored and transported thanks to ultra

compact design● Powerful 1500 Watt motor, producing 4,500rpm● Extra wide side extensions to support large timber● 50 degree left and right mitre capacity

48-tooth TCT blade, extensions, 1 x clamp, dust bag, wrench


Power input (W) 1500Blade diameter (mm) 216Blade type 48-tooth TCTNo load speed (rpm) 5000Mitre capacity left (˚) 50Mitre capacity right (˚) 50Bevel capacity left (˚) 47Bevel capacity right (˚) 2Weight (kg) 13Supplied in −Article Number 5133001257EAN Code 4892210119377

Max. cutting capacity: 90° mitre / 90° bevel 70 x 270mm 90° mitre / 45° bevel 48 x 270mm 45° mitre / 90° bevel 70 x 185mm 45° mitre / 45° bevel 48 x 185mm


RTS1800EF-G

1800W Table Saw

● Poweful 1800W motor for easy cutting● Die cast aluminium table for perfect support and accurate cutting● Extendable side fence allows increased material support up to 510mm● Front and rear locking side fence for accurate

and precise cutting● Dual purpose handle for quick and easy

height and/ or bevel adjustment● Overload protection ensures long term

durability and added safety● Soft start ensures the product is easy to use

and protects long term durability● Mitre gauge allows precise angle to be cut

quickly and easily between +60° and -60°● Built in tool box for additional accessory

storage● Deluxe collapsible stand with wheels for easy

storage and transportation● LiveTool Indicator™ glows blue when plugged


48-tooth TCT blade, Deluxe collapsible stand

Power input (W) 1,800No load speed (rpm) 4,500Blade width (mm) 254Blade type 48-tooth TCTBore size (mm) 30Max. cutting depth 45˚ (mm) 58Max. cutting depth 90˚ (mm) 84

Table dimensions with extensions (mm)

560 x 710

Weight (kg) 26.8kgSupplied in −Article Number 5133002026EAN Code 4892210126009

NEW

WOODWORKING | 41


RWB02

Adjustable Folding Work Bench

● Quality bamboo provides a great and naturally durable work surface

● Pivoting boards for heavy duty clamping

● Quick guide measurements● Foldable for easy storage and

portability● Multiple clamp settings

4 x clamps, spanner


Dimensions (mm) 605 x 120 x 180Weight (kg) 6.5Supplied in −Article Number 5133001779EAN Code 4892210121721

RWB03

Adjustable Metal Folding Work Bench

● Four position tiliting work surface (0°, 25°, 50°, 80°)● Seven level height adjustment to suit all

applications● Steel and aluminium work surface● Quick release lift boards for increased

clamping area● Sliding clamping system for maximum

versatility ● Foldable work bench for easy storage and

portability

4 x clamps, spanner


Dimensions (mm) 600 x 570 x 760Weight (kg) tbcSupplied in −Article Number 5133001780EAN Code 4892210121738

42 | WORK BENCHES


ACCESSORY SETS | 43

RAK30MIX

30 Piece Mixed Set

Contains● 9 x 25mm Screwdriver Bits 3 x Philips (PH1 – PH3) 3 x Pozidrive (PZ1 – PZ3) 3 x Slotted (4mm – 6mm)

● 1 x 60mm Magnetic Bit Holder● 4 x Non Magnetic Nut Drivers 1 x 6mm, 1 x 8mm, 1 x 10mm, 1 x 12mm

● 5 x Wood Boring Brad Point Drill Bits 1 x 3mm, 1 x 4mm, 1 x 5mm, 1 x 6mm, 1 x 8mm

● 5 x Masonry Drill Bits 1 x 5mm, 1 x 5,5mm, 1 x 6mm, 1 x 6,5mm, 1 x 7mm

● 6 x HSS Drill Bits 1 x 2mm, 1 x 2,5mm, 1 x 3mm, 1 x 4mm, 1 x 5mm, 1 x 6mm

Art.-No.: 5132002254EAN Code: 4892210113375

RAK22QC

22 Piece Quick-Change Set

Contains● 6 x 25mm Screwdriver Bits 3 x Philips (PH1 – PH3) 3 x Slotted (4mm – 6mm)

● 7 x 50mm Screwdriver Bits 3 x Philips (PH1 – PH3) 1 x Pozidrive (PZ2) 3 x Slotted (4mm – 6mm)

● 1 x Quick Change Chuck● 3 x Masonry Drill Bits (Hex Shank) 1 x 5mm, 2 x 6mm

● 1 x 80mm Stubby Screw Guide● 4 x HSS Drill Bits (2 – 5mm)

RAK40SD

40 Piece Driving Set

Contains● 32 x 25mm Screwdriver Bits 4 x Philips (PH1 – PH3) 6 x Pozidrive (PZ1 – PZ3) 4 x Hex (3mm – 6mm) 4 x Slotted (5mm – 7mm) 14 x Torx® (TX6 – TX40)

● 7 x 50mm Screwdriver Bits 2 x Philips (PH1 – PH2) 2 x Pozidrive (PZ1 – PZ2) 3 x Torx® (TX10 – TX20)

● 1 x 60mm Magnetic Bit Holder

Art.-No.: 5132002253EAN Code: 4892210113368

Art.-No.: 5132002257EAN Code: 4892210113337

RAK17SDC

17pcs Colour Coded Screwdriver Accessory Kit

Contains● Mini Quick Change Chuck x 1● 25mm screwdriving bits x 13 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, PH1 x 1, PH2 x 1, PH3 x 1 PZ1 x 1, PZ2 x 1, PZ3 x 1, SL3 x 1, SL4 x 1, SL5 x 2

● 25mm Security bits x 3 TR-15 x 1, TR-20 x 1, TR-25 x 1

Art.-No.: 5132002682EAN Code: 4892210127198

NEWRAK16FP

16pcs Flat Pack Furniture Accessory Kit

Contains● 25mm screwdriver bits x 15 Hex 4 x 2, Hex 5 x 2, Hex 6 x 1, PH1 x 1, PH2 x 1, PH3 x 1 PZ1 x 1, PZ2 x 2, PZ3 x 2, SL4 x 1, SL5 x 1

● Magnetic Bit holder (60mm) x 1

Art.-No.: 513200267EAN Code: 4892210126849

RAK40SDI

40pcs Impact Rated Screwdriving Accessory Kit

Contains● Magnetic bit holder x 1 60mm x 1

● 25mm impact driving bits x 32 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 6 x 1, PH1 x 1, PH2 x 2, PH3 x 1, PZ1 x 2, PZ2 x 2, PZ3 x 2, SL5 x 1, SL6 x 2, SL7 x 1, TX-6 x 1, TX-7 x 1, TX-8 x 1, TX-9 x 1, TR-10 x 2, TR-15 x 2, TR-20 x 2, TR-25 x 2, TX-30 x 1, TX-40 x 1

● 50mm impact driving bits x 7 PH1 x 1, PH2 x 1, PZ1 x1, PZ2 x 1, TX-10 x 1, TX-15 x 1, TX-20 x

Art.-No.: 5132002683EAN Code: 4892210127204


44 | ACCESSORY SETS

Contains● 10 x Masonry Drill Bits 1 x 4mm, 1 x 5mm, 1 x 5,5mm, 2 x 6mm, 1 x 7mm, 2 x 8mm, 1 x 9mm, 1 x 10mm

Contains● 19 x HSS Drill Bits 1 x 2mm, 2 x 2,5mm, 2 x 3mm, 2 x 3,5mm, 2 x 4mm, 2 x 4,5mm, 2 x 5mm, 2 x 6mm, 1 x 7mm, 1 x 8mm, 1 x 9mm, 1 x 10mm

Art.-No.: 5132002258EAN Code: 4892210113290

Art.-No.: 5132002260EAN Code: 4892210113283

Contains● 1 x 5mm SDS Bit● 2 x 5,5mm SDS Bit● 1 x 6mm SDS Bit● 1 x 7mm SDS Bit● 1 x 8mm SDS Bit● 1 x 10mm SDS Bit● 1 x 12mm SDS Bit

Art.-No.: 5132002262EAN Code: 4892210113276

RAK10MB

10 Piece Masonary Bit Set

RAK19HSS

19 Piece HSS Bit Set

RAK08SDS

8 Piece SDS-Plus Masonary Bit Set

RAK08QRB

10 Piece Router Bit Set

RAK08BP

8 Piece Brad Point Bit Set

RAK07SB

7 Piece Spade Bit Set

Contains● 7 x Flatwood Spade Bits 1 x 10mm, 1 x 13mm, 1 x 16mm, 1 x 20mm, 1 x 22mm, 1 x 25mm, 1 x 32mm

Contains● 1 x 1⁄4˝ (6,4mm) Straight Cutter● 1 x 1⁄2˝ (12,7mm) Straight Cutter● 1 x 3⁄4˝ (19,05mm) Straight Cutter● 1 x 1⁄2˝ (12,7mm) Core Box Cutter● 1 x 1⁄4˝ (6,4mm) Roundover Cutter● 1 x 3⁄8˝ (9,5mm) Roundover Cutter● 1 x 1⁄2˝ (12,7mm) Dovetail Cutter● 1 x 5⁄32˝ (3,97mm) Roman Ogee Cutter● 1 x Allen key● 1 x 3⁄8˝ Bearing Washer

Contains● 8 x Wood Boring Brad Point Drill Bits (1 – 10mm)

Art.-No.: 5132002259EAN Code: 4892210113306

Art.-No.: 5132002252EAN Code: 4892210113351

Art.-No.: 5132002255EAN Code: 4892210113344


RAK46MIX

46pcs Mixed Accessory Kit

Contains● Masonry Drill bits x 3 3mm x 1, 6mm x 1, 8mm x 1

● HSS Drill Bits (titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1

● Magnetic bit holder x 1 60mm x 1

● 25mm screwdriving bits x 25 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 1, PZ0 x 1, PZ1 x 2, PZ2 x 3, PZ3 x 1, SL3 x 1, SL4 x 1, SL5 x 1, SL6 x 1, TR-20 x 1, TR-25 x 1, TX-10 x 1, TX-15 x 1, TX-20 x 1, TX-25 x 1, TX-30 x 1, TX-40 x 1, SQ1 x 1, SQ2 x 1

Art.-No.: 5132002686EAN Code: 4892210127464

ACCESSORY SETS | 45

RAK86MIX


Contains● Masonry Drill Bits x 9 3mm x 1, mm x 1, 5mm x 2, 6mm x 2, 8mm x 2, 10mm x 1

● Wood-boring bradpoint drill bits x 9 3mm x 1, mm x 1, 5mm x 2, 6mm x 2, 8mm x 2, 10mm x 1

● HSS Drill Bits (Titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1

● Flatwood Spade Bits x 2 16mm x 1, 22mm x 1

● Magnetic Bit Holder x 1 60mm x 1● 25mm Screwdriving Bits x 54 Hex 1.5 x 1, Hex 2 x 1, Hex 2. x 1, Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 5.5 x 1, Hex 6 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 2, PZ0 x 1, PZ1 x 2, PZ2 x 4, PZ3 x 2, SL3 x 1, SL4 x 2, SL5 x 1, SL6 x 1, SL7 x 2, TR-10 x 1, TR-15 x 1, TR-20 x 1, TR-25 x 1, TR-27 x 1, TR-30 x 1, TR-40 x 1, TX-10 x 1, TX-15 x 2, TX-20 x 2, TX-25 x 2, TX-27 x 2, TX-30 x 2, TX-40 x 1, SQ1 x 1, SQ2 x 1, SQ3 x 1

Art.-No.: 5132002688EAN Code: 4892210127488

RAK69MIX


Contains● Masonry Dril Bits x 6 3mm x 1, 4mm x 1, 5mm x 1, 6mm x 1, 8mm x 1, 10mm x 1

● Wood-boring bradpoint drill bits x 6 3mm x 1, 4mm x 1, 5mm x 1, 6mm x 1, 8mm x 1, 10mm x 1

● HSS Drill Bits (Titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1

● Flatwood Spade Bits x 2 16mm x 1, 22mm x 1

● Magnetic Bit Holder x 1 60mm x1

● 25mm screwdriving bits x 43 Hex 1.5 x 1, Hex 2 x 1, Hex 2.5 x 1, Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 6 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 2, PZ0 x 1, PZ1 x 2, PZ2 x 5, PZ3 x 2, SL3 x 1, SL4 x 1, SL5 x 1, SL6 x 1, SL7 x 1, TR-10 x 1, TR-15 x 1, TR-20 x 1, TR-25 x 1, TX-10 x 1, TX-15 x 1, TX-20 x 1, TX-25 x 1, TX-30 x 1, TX-40 x 1, SQ1 x 1, SQ2 x 1, SQ3 x 1

Art.-No.: 5132002687EAN Code: 4892210127471


46 | ACCESSORY SETS

Contains● 1 x 100mm Thin Recip Saw Blade Medium-thick metal cutting 14TPI

● 6 x 6˝ (152mm) Recip Saw Blade 1 x Wood cutting 10TPI, 1 x Metal cutting 24TPI 1 x Metal cutting 14TPI, 1 x Pruning blade 4 – 5TPI 1 x Universal cutting 10TPI

Contains● 5 x Hole saws 1 x 1–1⁄4˝ (32mm), 1 x 1–1⁄2˝ (38mm), 1 x 1–3⁄4˝ (45mm), 1 x 2˝ (50mm), 1 x 2–1⁄8˝ (54mm)

● 1 x Mandrel ● 1 x Allen key

Contains● 1 x 102mm Flush Cut (10 TPI)● 2 x 102mm Reverse Cut (10 TPI)● 2 x 102mm Scroll Cut (14 TPI)

Art.-No.: 5132002547EAN Code: 4892210119285

Art.-No.: 5132002548EAN Code: 4892210119292

Art.-No.: 5132002697EAN Code: 4892210128966

RAK06RB

6 Piece Recip Blade Kit

RAK07HS

7 Piece Hole Saw Kit

RAK05JSBFC

5 Piece Jigsaw Blade Kit

RAK13MT

13 Piece Multi Tool Accessory Set

RAK02MT

2 Piece Multi Tool Blade Set

RAK10MT

10 Piece Multi Tool Sanding Set

Contains● 1 x Flush Cut Wood / Metal Blade 3-1⁄2˝ (~89mm)

● 1 x 1-1⁄8˝ Plunge Cut Wood / Metal Blade 1-1⁄8˝ (~29mm)

● 1 x Scraper Blade 2˝ (~50mm)

● Sanding Paper (for wood) 3 x Grit 60, 3 x Grit 80, 4 x Grit 120

Contains● 1 x Flush Cut Wood / Metal Blade 3-1⁄2˝ (~89mm)

● 1 x 1-1⁄8˝ Plunge Cut Wood / Metal Blade 1-1⁄8˝ (~29mm)

Art.-No.: 5132002599EAN Code: 4892210120809

Art.-No.: 5132002595EAN Code: 4892210120816

Contains● Sanding Paper (for wood) 3 x Grit 60, 3 x Grit 80, 4 x Grit 120

Art.-No.: 5132002600EAN Code: 4892210120823

NEW


ACCESSORY SETS | 47

PB82A2

2 Piece 82mm Planer Blade Set

RO125A10

10 Piece 125mm Sanding Discs for Random Orbit Sanders

RAK03SR

3 Piece Saw Rail

PB50A2

3 Piece 50mm Planer Blade Set

BSS76A2

2 Piece 3˝ Sanding Belt Set

For further Ryobi® product information, please go online to www.ryobitools.co.uk

Contains● 3 x 50 Replacement Planer Blades Fits: CPL180M / CPL180MHG

Contains● 3 x Guide Rail Assembly ~408mm (length)

● 2 x Clamp Assembly

Contains● 10 x 125mm RO Sanding Disc 2 x Grit 100, 3 x Grit 120, 3 x Grit 240, 2 x Grit 320

Contains● 2 x 82mm (length) Planer Blade

Contains● 2 x 3˝ (~76mm) Sanding Belt 1 x Grit 60, 1 x Grit 80

Art.-No.: 5132002602EAN Code: 4892210120878 Art.-No.: 5132002674

EAN Code: 4892210125071

Art.-No.: 5132002596EAN Code: 4892210120847

Art.-No.: 5132002597EAN Code: 4892210120861

Art.-No.: 5132002608EAN Code: 4892210121257

Contains● 1 x 102mm Flush Cut (10 TPI)● 2 x 102mm Reverse Cut (10 TPI)● 2 x 102mm Scroll Cut (14 TPI)


Blades

Tool BagsModel No. Dimensions Description

UTB2 Size: 355 x 203 x 279mm ONE+ Canvas Tool Bag UTB4 Size: 460 x 305 x 305mm Medium Heavy Duty Contractors Tool Bag

Model No. Description Fits Models

SB254T48A1 254mm 48 tooth TCT Mitre Saw Blade EMS254L / ETMS1825HG / ETS1825HG / ETS1525SCHG / ETS1526ALHG / ETS1526HGSB254T24A1 254mm 24 tooth TCT Mitre Saw Blade EMS254L / ETMS1825HG / ETS1825HG / ETS1525SCHG / ETS1526ALHG / ETS1526HGSB216T48A1 216mm 48 tooth TCT Mitre Saw Blade EMS216LSB216T24A1 216mm 24 tooth TCT Mitre Saw Blade EMS216LCSB150A1 150mm circular saw blade (18-tooth, 10mm bore) LCS180 / RWSL1801CBS170A1 170mm circular saw blade (12-tooth, 20mm bore) EWS1150RSCSB190A1 190mm circular saw blade (18-tooth, 16mm bore) EWS1266HG / RWS1250 / RWS1400 / RWS1600TSBA1 4˝ (102mm) tile saw blade LTS180MPB82A2 2 pack 82mm planer blades EPN7582NHG / EPN6082CHGPB50A2 2 pack 50mm planer blades CPL180MHGRAK-0001PB 2 pack 50mm planer blades CPL180MHG

48 | ACCESSORY SETS

Sanding Accessories

Model No. Description Fits Models

ASP00102 10 x assorted sanding sheets CCC180MSMS30A 30 piece multi sand sheets EMS180RVSPS20A 20 piece palm sand sheets EPS80RS


INDEX | 49

IndexContents / Key 3

New from Ryobi® 4 – 5 / 14

18V ONE+™ Battery Technology 6 – 7

Cordless Power Tools 8 – 31

ONE+™ 18V Tools 9 – 19

LLCDI18022 18V 2-Speed Hammer Drill/Driver 10

RCD18021L 18V 2-Speed Drill/Driver 10

RCD1802M 18V 2-Speed Drill/Driver 10

LCDI1802M 18V 2-Speed Hammer Drill/Driver 10

CDC1802M 18V 2-Speed Drill/Driver 11

CRH1801M 18V SDS+ Hammer Drill 11

RAD1801M 18V Right Angle Drill 11

RID1801M 18V Impact Driver 12

BIW180M 18V Impact Wrench 12

RMT1801M 18V Multi Tool 12

RWSL1801M 18V Circular Saw 13

RRS1801M 18V Reciprocating Saw 13

R18JS-0 18V Jigsaw 13

R18N18G-0 18V Gauge Nailer 15

R18N16G-0 18V Gauge Nailer 15

R18AG-0 18V Angle Grinder 15

EMS190DCL 18V Mitre Saw 16

R18I-0 18V Inflator 16

LTS180M 18V Tile Saw 16

CPL180M 18V Planer 17

CRO180M 18V 125mm Random Orbit Sander 17

CCC1801M 18V Corner Sander 17

CCG1801M 18V Caulking Gun 18

CHV182M 18V Hand Vac 18

CDR180M 18V MP3 Compatible Radio 18

RFL180M 18V Flashlight 19

P620 18V Speed Sprayer 19

ONE+™ 18V Cordless Lawn & Garden Tools 20 – 25

RLM18X40H240 18V Lithium Fusion™ Lawnmower 21

RLT1830H13 18V Hybrid Line Trimmer 22

RLT1825Li 18V Line Trimmer 22

OLT1831S 18V Line Trimmer 23

RHT1851R15 18V Hedge Trimmer 23

OHT1855R 18V Hedge Trimmer 24

OHT1850X 18V Long Reach Hedge Cutter 24

OPP1820 18V Pole Saw 25

OBL1802 18V Blower 25

12V Tools 26 – 27

RCD12011L 12V Drill Driver 26

RMT12011L 12V Multi tool 27

R12PS-L13S 12V Palm Sander 27

RRS12011L 12V Multi Purpose Saw 27

4V Tools 28 – 29

CSD4107BG 4V Lithium-Ion Screwdriver 29

CSD4130GN 4V Lithium-Ion screwdriver 29

Battery & Charger Summary 30 – 31

Corded Power Tools 32 – 42

RPD1200-K 1200W Percussion Drill 33

RPD800-K 800W Percussion Drill 33

RPD500-G 500W Percussion Drill 33

ERH710RS 710W SDS-Plus Rotary Hammer Drill 34

EAG2000RS Large Angle Grinder 34

EAG750RS Small Angle Grinder 34

EAG600RS Small Angle Grinder 35

RJS1050-K 680W Jigsaw 35

RJS750-G 500W Jigsaw 35

ERS80VHG Reciprocating Saw 36

RWS1250-G 66mm Circular Saw 36

EWS1150RS 55mm Circular Saw 36

RMT200-S 200W Multi Tool 37

ROS300 Random Orbit Sander 37

EMS180RV Multi Pad Sander 37

EPS80RS Palm Sander 38

ESS280RV 1⁄3 Sheet Sander 38

ESS200RS 1⁄3 Sheet Sander 38

EOS2410NHG 1⁄4 Sheet Palm Sander 39

EBS800V 76mm (3˝) Belt Sander 39

EPN7582NHG 750W Planer 39

ERT1400RV 6.35mm (1⁄4˝) 1400W Router 40

EHG2000 Heat Gun 40

EMS254L 254mm (10˝) Compact Slide Mitre Saw with Laser 40

EMS216L 216mm (71⁄5˝) Compact Slide Mitre Saw with Laser 41

RTS1800EF-G 1800W Table Saw 41

RWB02 Adjustable Folding Work Bench 42

RWB03 Adjustable Metal Folding Work Bench 42

Accessories 43 – 48


50 | NOTES


NOTES | 51


NEW

Dealer stamp:

Content of the catalogue is correct at time of going to print. Ryobi reserve the right to change images and prices without prior notice. The use of the trademark RYOBI® is pursuant to a license granted by Ryobi Limited.5139000539

ryobitoolsuk

Ryobi Technologies (UK) Limited1st Floor Unit 3 Globeside Business Park, Fieldhouse Lane, Marlow, Bucks, SL71HZTel: +44 (0) 1628 894 400 Fax: +44 (0) 1628 894 401Email: [email protected]: www.ryobitools.co.uk

Technical helpline: +44 (0) 800 389 0305For your nearest local service centre please contact customer services on: +44 (0) 1628 894 400


Date post:	06-Apr-2016
Category:	Documents
Upload:	ryobi-tools
View:	235 times
Download:	7 times

Ryobi UK Powertools 2015 Catalogue

Documents