SINUMERIK 840Di –The Totally PC-Integrated Alternative
sinumerik
Your Siemens worldwide partnerscan be found atwww.siemens.com/automation/partners
Siemens AGAutomation and Drives
Motion Control Systems
P.O. Box 3180
D-91050 Erlangen
w w w . s i e m e n s . c o m / s i n u m e r i k
PU
BL
ICIS
Subj
ect
to c
han
ge w
ith
out
prio
r n
otic
e
| O
rder
No.
E2
00
01
-A4
10
-P6
10
-X-7
60
0
|
Dis
po 0
63
11
, SEK
30
38
5
|
21
C7
63
6 M
K.M
C.1
0.S
TAN
.52
.2.1
7 W
S 0
80
23
. |
P
rin
ted
in G
erm
any
2 3
Human-machine interface plus NC control –the PC-based single-processor solution:even more open, even more flexible
SINUMERIK 840Di can offer you muchmore. Of special interest is the levelof integration of the SINUMERIK fam-ily. NC and PLC functions, operatorfunctions and machine data are com-patible between, say, a SINUMERIK840D and a SINUMERIK 840Di, andthe relevant NC and PLC programsrun on both systems. And since thesystem is so open, the software ap-plications can also be used on bothsystems. SINUMERIK 840Di is part ofthe automation environment ofSIMATIC® and SIMODRIVE®.
Openness in hardware and softwareprovides you with a high degree offlexibility and expandability. Thismakes possible tailored solutions forindustry-specific and customer-specific requirements.
Distributed configuration withPROFIBUS-DPThere is a clearly discernible trendtowards distributed systems. Anotherimportant feature of the SINUMERIK840Di is PROFIBUS-DP with MotionControl. This is, after all, the uniformfieldbus for drives and I/O and allowsdistributed configuration of the entiresystem. Such a configuration providesthe advantage of being able to installdrive units and components, such asI/O modules for on/off signals, in thevicinity of the machine. In this way,you can reduce the area needed forthe control cabinet and you can makereductions in wiring overhead.
Modern control systems based on industrial PCs are used in automation engineering with increasing
frequency today. Together with a standard operating system such as Windows NT, these control systems
play a growing role as open and flexible software and hardware platforms. The user is at home in the
familiar PC world. The totally PC-integrated SINUMERIK® 840Di NC control provides you with a PC-based
control concept that sets new trends. The main applications to profit from this concept are those where
PCs are used anyway or where there is a preference for distributed configuration of the drives and I/Os.
Application areas include woodworking, glass, ceramics, packaging, handling, presses, bending, but
also different machine tools and machine-tool-like applications. The outstanding feature, next to a
high degree of openness in hardware and software, is that on the SINUMERIK 840Di, the CNC control
functions also run on the PC processor in addition to the HMI functionality. This means that the NC
processor unit required on conventional controls can be omitted. The automation system largely consists
of largely standard components: industrial PC with interface card, PROFIBUS-DP, Windows NT operating
system, OPC (OLE for Process Control) applications interface and NC control software.
2 3
Human-machine interface plus NC control –the PC-based single-processor solution:even more open, even more flexible
SINUMERIK 840Di can offer you muchmore. Of special interest is the levelof integration of the SINUMERIK fam-ily. NC and PLC functions, operatorfunctions and machine data are com-patible between, say, a SINUMERIK840D and a SINUMERIK 840Di, andthe relevant NC and PLC programsrun on both systems. And since thesystem is so open, the software ap-plications can also be used on bothsystems. SINUMERIK 840Di is part ofthe automation environment ofSIMATIC® and SIMODRIVE®.
Openness in hardware and softwareprovides you with a high degree offlexibility and expandability. Thismakes possible tailored solutions forindustry-specific and customer-specific requirements.
Distributed configuration withPROFIBUS-DPThere is a clearly discernible trendtowards distributed systems. Anotherimportant feature of the SINUMERIK840Di is PROFIBUS-DP with MotionControl. This is, after all, the uniformfieldbus for drives and I/O and allowsdistributed configuration of the entiresystem. Such a configuration providesthe advantage of being able to installdrive units and components, such asI/O modules for on/off signals, in thevicinity of the machine. In this way,you can reduce the area needed forthe control cabinet and you can makereductions in wiring overhead.
Modern control systems based on industrial PCs are used in automation engineering with increasing
frequency today. Together with a standard operating system such as Windows NT, these control systems
play a growing role as open and flexible software and hardware platforms. The user is at home in the
familiar PC world. The totally PC-integrated SINUMERIK® 840Di NC control provides you with a PC-based
control concept that sets new trends. The main applications to profit from this concept are those where
PCs are used anyway or where there is a preference for distributed configuration of the drives and I/Os.
Application areas include woodworking, glass, ceramics, packaging, handling, presses, bending, but
also different machine tools and machine-tool-like applications. The outstanding feature, next to a
high degree of openness in hardware and software, is that on the SINUMERIK 840Di, the CNC control
functions also run on the PC processor in addition to the HMI functionality. This means that the NC
processor unit required on conventional controls can be omitted. The automation system largely consists
of largely standard components: industrial PC with interface card, PROFIBUS-DP, Windows NT operating
system, OPC (OLE for Process Control) applications interface and NC control software.
The NC software runs in real timeon the industrial PC. Here, we havedeveloped a solution that guaranteesextremely reliable execution ofreal-time tasks without impairingthe Windows NT applications. ThePLC software runs on the PLChardware of the MCI board. Likethe SINUMERIK 840D, it is compatiblewith the SIMATIC S7 315-2DP.
HMI Siemens-style: simple anduser-friendlyJust like the other SINUMERIKsystems, you can expect all-rounduser-friendly handling from the 840Divariant. The following software toolsare included as standard:
SINUMERIK 840Di Startupincluding the following:
Startup tool for the controller(SinuCom NC)
Startup tool for the SIMODRIVE 611universal drive system (SimoCom U)
SINUMERIK 840Di is based on Windows so it will be playing it safe in the
future too. The Windows NT 4.0 operating system is used as the basis for
the SINUMERIK 840Di system software – without modifying the operating
system code. There are extremely extensive NC functions, comparable
with the SINUMERIK 840D, available for your applications. This really gets
your machinery into top gear and ensures flexible adaptation to the
different automation tasks.
54
Openness for your technology softwareand Windows NT help your production machinery take off
The preinstalled SINUMERIK 840DiStartup is used primarily for simplefirst-time startup of the machine.Startup is a Windows program foreasy entry into the SINUMERIK 840Diand it enables simple operatorprocedures as well as the creationand selection of user programs.There is one startup tool each for thecontroller and for the SIMODRIVE 611universal drive system. These areWindows-based tools. SinuCom NCis a user-friendly, graphical tool withwhich the controller/machine can bestarted up simply on input of therelevant data. SimoCom U is a simplestartup tool with user prompting.Clear, informative screen forms withplaintext information and help textsmake SimoCom U an easy-to-use toolfor starting up your drive.
Everything under control with theHMI building block systemWe offer a range of software packagesthat provide extra flexibility in thesolution of customized tasks withSINUMERIK 840Di. For operator input,programming and parameterization,there is the HMI ”building blocksystem”. Conceived as an open archi-tecture system, you can choose bet-ween different levels, depending onrequirements. The system softwarecontains the following as standard:
OA copy license for the HMIprogramming package(OA = Open Architecture)
The following are optional:
SINUMERIK HMI Advanced-Standard user interface formachine tools
HMI configuring package
OA copy license for HMIconfiguring package
SIMATIC ProTool/Proconfiguring software
HMI programming package
The SINUMERIK HMI Advancedstandard interface for machinetools is ideal for users in the ma-chine tool sector.
A special advantage is provided bythe SIMATIC ProTool/Pro configuringtool with the HMI configuring packa-ge. With this, you can create yourown technology-specific user inter-face without the need for softwareengineering skills.
Users wishing to integrate their ownhigh-level language applications areallowed access to the control datarequired for those applications by theCOM/OPC application interface.
The NC software runs in real timeon the industrial PC. Here, we havedeveloped a solution that guaranteesextremely reliable execution ofreal-time tasks without impairingthe Windows NT applications. ThePLC software runs on the PLChardware of the MCI board. Likethe SINUMERIK 840D, it is compatiblewith the SIMATIC S7 315-2DP.
HMI Siemens-style: simple anduser-friendlyJust like the other SINUMERIKsystems, you can expect all-rounduser-friendly handling from the 840Divariant. The following software toolsare included as standard:
SINUMERIK 840Di Startupincluding the following:
Startup tool for the controller(SinuCom NC)
Startup tool for the SIMODRIVE 611universal drive system (SimoCom U)
SINUMERIK 840Di is based on Windows so it will be playing it safe in the
future too. The Windows NT 4.0 operating system is used as the basis for
the SINUMERIK 840Di system software – without modifying the operating
system code. There are extremely extensive NC functions, comparable
with the SINUMERIK 840D, available for your applications. This really gets
your machinery into top gear and ensures flexible adaptation to the
different automation tasks.
54
Openness for your technology softwareand Windows NT help your production machinery take off
The preinstalled SINUMERIK 840DiStartup is used primarily for simplefirst-time startup of the machine.Startup is a Windows program foreasy entry into the SINUMERIK 840Diand it enables simple operatorprocedures as well as the creationand selection of user programs.There is one startup tool each for thecontroller and for the SIMODRIVE 611universal drive system. These areWindows-based tools. SinuCom NCis a user-friendly, graphical tool withwhich the controller/machine can bestarted up simply on input of therelevant data. SimoCom U is a simplestartup tool with user prompting.Clear, informative screen forms withplaintext information and help textsmake SimoCom U an easy-to-use toolfor starting up your drive.
Everything under control with theHMI building block systemWe offer a range of software packagesthat provide extra flexibility in thesolution of customized tasks withSINUMERIK 840Di. For operator input,programming and parameterization,there is the HMI ”building blocksystem”. Conceived as an open archi-tecture system, you can choose bet-ween different levels, depending onrequirements. The system softwarecontains the following as standard:
OA copy license for the HMIprogramming package(OA = Open Architecture)
The following are optional:
SINUMERIK HMI Advanced-Standard user interface formachine tools
HMI configuring package
OA copy license for HMIconfiguring package
SIMATIC ProTool/Proconfiguring software
HMI programming package
The SINUMERIK HMI Advancedstandard interface for machinetools is ideal for users in the ma-chine tool sector.
A special advantage is provided bythe SIMATIC ProTool/Pro configuringtool with the HMI configuring packa-ge. With this, you can create yourown technology-specific user inter-face without the need for softwareengineering skills.
Users wishing to integrate their ownhigh-level language applications areallowed access to the control datarequired for those applications by theCOM/OPC application interface.
6 7
In the basic version, the hardware ofthe SINUMERIK 840Di comprises theindustrial PC and an interface boardwith integral hardware PLC, the MCIboard. You can choose between twoPC variants, depending on the appli-cation. The first is the PCU 50, a rack-mounted PC with shallow installationdepth. The rugged steel housing withunder-pressure ventilation has a harddisk with specially mounted shockprotection. In addition, there is a num-ber of interfaces for the most variedrequirements. There is an optionalexternal 3.5” diskette drive as well asmemory expansion.
The second variation is the PCU 70with greater installation volume toaccommodate several PC cards.
Everything on-board for optimalcommunicationsThe MCI board is a PCI plug-in card.This module comprises an integralSIMATIC S7 315-2DP PLC-CPU as wellas interfaces for MPI (multi-point in-terface) and PROFIBUS-DP. The 840Diis connected to the drives and theI/O via the PROFIBUS-DP interface.The SIMODRIVE 611 universal andSIMODRIVE POSMO can additionallybe connected as the digital drive sys-tem. When using the ADI4 interfacemodule (Analog Drive Interfacefor 4 axes), analog drives such asSIMODRIVE 611 can be used.And the SIMATIC DP ET 200 modulerange is available for the I/O. (SeeSIMATIC documentation for connec-tion prerequisites).
With future-proof hardwareExploit the freedoms of the PC world
The new operator panels from theSINUMERIK range (OP 010, OP 010C,OP 010S, OP 012, OP 015) are used.In addition, a mouse and standardkeyboard can be connected, as wellas other monitors via the VGA inter-face.
Options for user-friendlyhandlingThe MPI interface of the MCI boardprovides flexibility with regard to de-vice connections. It is used for optio-nal connection of a machine controlpanel, a hand-held operator/pro-gramming device or an external pro-gramming device for the SIMATIC S7PLC. Also optionally available is an MCIboard extension. You can connect fourhigh-speed digital I/Os, two measur-ing pulse sensors and two electronichand-wheels via this board.
Open, rugged, simple – system advantages that pay. Because the hardware
basis of SINUMERIK 840Di is a genuine industrial PC with MCI board. When
compared to standard PCs, this provides significantly higher functional
security thanks to industrial quality. That means higher ambient
temperature, higher level of mechanical stress and electromagnetic
compatibility (EMC) in accordance with industrial requirements, as well
as development according to strict SIMATIC and SINUMERIK requirements.
DIN ISO 9001, standardized type tests and a ”run-in test” guarantee a high
degree of reliability.
6 7
In the basic version, the hardware ofthe SINUMERIK 840Di comprises theindustrial PC and an interface boardwith integral hardware PLC, the MCIboard. You can choose between twoPC variants, depending on the appli-cation. The first is the PCU 50, a rack-mounted PC with shallow installationdepth. The rugged steel housing withunder-pressure ventilation has a harddisk with specially mounted shockprotection. In addition, there is a num-ber of interfaces for the most variedrequirements. There is an optionalexternal 3.5” diskette drive as well asmemory expansion.
The second variation is the PCU 70with greater installation volume toaccommodate several PC cards.
Everything on-board for optimalcommunicationsThe MCI board is a PCI plug-in card.This module comprises an integralSIMATIC S7 315-2DP PLC-CPU as wellas interfaces for MPI (multi-point in-terface) and PROFIBUS-DP. The 840Diis connected to the drives and theI/O via the PROFIBUS-DP interface.The SIMODRIVE 611 universal andSIMODRIVE POSMO can additionallybe connected as the digital drive sys-tem. When using the ADI4 interfacemodule (Analog Drive Interfacefor 4 axes), analog drives such asSIMODRIVE 611 can be used.And the SIMATIC DP ET 200 modulerange is available for the I/O. (SeeSIMATIC documentation for connec-tion prerequisites).
With future-proof hardwareExploit the freedoms of the PC world
The new operator panels from theSINUMERIK range (OP 010, OP 010C,OP 010S, OP 012, OP 015) are used.In addition, a mouse and standardkeyboard can be connected, as wellas other monitors via the VGA inter-face.
Options for user-friendlyhandlingThe MPI interface of the MCI boardprovides flexibility with regard to de-vice connections. It is used for optio-nal connection of a machine controlpanel, a hand-held operator/pro-gramming device or an external pro-gramming device for the SIMATIC S7PLC. Also optionally available is an MCIboard extension. You can connect fourhigh-speed digital I/Os, two measur-ing pulse sensors and two electronichand-wheels via this board.
Open, rugged, simple – system advantages that pay. Because the hardware
basis of SINUMERIK 840Di is a genuine industrial PC with MCI board. When
compared to standard PCs, this provides significantly higher functional
security thanks to industrial quality. That means higher ambient
temperature, higher level of mechanical stress and electromagnetic
compatibility (EMC) in accordance with industrial requirements, as well
as development according to strict SIMATIC and SINUMERIK requirements.
DIN ISO 9001, standardized type tests and a ”run-in test” guarantee a high
degree of reliability.
SINUMERIK 840Di –The Totally PC-Integrated Alternative
sinumerik
Your Siemens worldwide partnerscan be found atwww.siemens.com/automation/partners
Siemens AGAutomation and Drives
Motion Control Systems
P.O. Box 3180
D-91050 Erlangen
w w w . s i e m e n s . c o m / s i n u m e r i k
PU
BL
ICIS
Subj
ect
to c
han
ge w
ith
out
prio
r n
otic
e
| O
rder
No.
E2
00
01
-A4
10
-P6
10
-X-7
60
0
|
Dis
po 0
63
11
, SEK
30
38
5
|
21
C7
63
6 M
K.M
C.1
0.S
TAN
.52
.2.1
7 W
S 0
80
23
. |
P
rin
ted
in G
erm
any