S-4000 Axial Insertion machine

http://www.smthelp.com

Through Hole Products

Axial/Sequencer S-4000

Expandable from 20 stations to 100 stations (10 Station Increments) Speeds up to 22,000/hour Low maintenance feeder technology Dual part detection – two parts in same chain slot. Insertion Directions: 0°,90°,180°,270° Jumper Wire Feeder Support

http://www.smthelp.com

• - 22,000 CPH – Spec Speed• 13,000 CPH – “Real” Throughput Speed

• - Expandable from 20 inputs up to 100 inputs•- Jumper Wire Feeder Support, insert JW directly directly without sequencer again to save 1/3 JW.•- Low maintenance dispenser heads

• - Insertion Directions: 0°,90°,180°,270°• - Components require: 52mm Taped axial leads; • - Component lead span: 5.0mm • - Components available: Capacitor, Transistor, Diode, Resistance, Fuse, Taped axial leads components•- Lowers Cost of Ownership• Low Energy costs.•- Easy to Use User Interface• Easy operation, use Excel program and USB input. • Off-line programming available

http://www.smthelp.com

Insertion Rate 24000 pcs/hrNon Performing Rate Less than 300PPMInsert Theta Parallel 0°,90°,180°, 270°Component Span Dual span 5.0mm-20mmPCB size Max: 450mm*450mm;

Min:50mm*50mm PCB thickness 0.79-2.36mmComponent types Axial tape packed material, such as

capacitor, transistor, diode, resistor, blown fuse.

Clinch length 1.2-2.2mm(adjustable)Clinch degree 0-35°(adjustable)Station quantity 60 stations(recommended),optional（10-

100 stations）Machine size (length×width×height)

Main unit 1700mm×1300mm×1600mm

Station size(length×width×height)

510mm×1000mm×1410mm(10 stations)

Main unit weight 1500KGAuxiliary unit weight 750KG（40 stations）Power supply 220V,AC(single phase), 50/60HZ, 2.0KVA;System protection Uninterruptible power supply (UPS)

configuration, run 15 minutes after power outage

Working power 1.6KW (Energy Saving)Air pressure 0.6–0.8MPAAir consumption 0.3m³/minute

S4000 Axial Auto Insertion Machine

Axial Inserter S-4000 Specification

http://www.smthelp.com

Axial Inserter S-4000 SpecNeighbor components parallel distance E(pitch)=5.0mmTape width: 52mmMax Component Body Length：C=16mm , Resistor:1/8W-2WAxial Lead Component Kind：Diode、Resistor、Capacitor and so on.Max body diameter D=5.0mm

http://www.smthelp.com

Axial Inserter S-4000 SpecInsertion head work principal

Component body

http://www.smthelp.com

Axial Inserter S-4000 SpecPCB Size：Max: 450MM*450MM Min:50MM*50MM

http://www.smthelp.com

Axial Inserter S-4000 Spec

Hole Span：5～20mmJW Span：5~30mm

Hole Diameter = Lead Diameter + 0.48mm ±0.08mm.(0.019") (0.003")

Clinch lead angle is adjustable in a range (0°- 45°). Clinch lead length is adjustable from 1.28mm (0.050") to 1.80mm (0.071") and is measured from the center of the insertion hole to the end of the lead.

http://www.smthelp.com

Axial S-4000 Insertion PCB

http://www.smthelp.com

• Electrical industries appliances：Air conditioner, Television, Microwave, Electric cooker, Electric kettle, Induction cooker etc.

• Vehicle industries application: Vehicle power supply, Vehicle light, Car audio etc.

http://www.smthelp.com

• Power supply appliance: Vehicle power supply, Energy saving power supply, Ballast etc.

http://www.smthelp.com

http://www.smthelp.com

Welcome inquiry

1,Please visit : www.smthelp.com

2, Find us more: https://www.facebook.com/autoinsertion

3, Know more our team: https://cn.linkedin.com/in/smtsupplier

4, Welcome to our factory in Shenzhen China

5, Google：Auto+Insertion

6, Looking forward to your email: Jessica@smthelp.com

http://www.smthelp.com

Contact ：JessicaEmail：Jessica@smthelp.comSkype:Jessica SMT SalesPhone:+86 17773027293Website: www.smthelp.comShenzhen Southern Machinery Sales and Service Co., Ltd