S E G L - C - USA -...

Set-Up Recommendations for

Spray Equipment GuideLouisville - Colorado - USA

C.A.T. AAA ConfigurationsThe C.A.Technologies 14:1 Air Assist Airless Pump can now be suppliedwith either the Cougar or the Bobcat AAA spray guns. The Cougar outfits willcome standard with 3/16” fluid hose and 1/4” air hose (53-402A) and bedesignated by the part # OC14. The Bobcat outfits feature the newlightweight ergonomic design with ultra light trigger pull. This outfit will comestandard with the new 1/8” fluid hose and 1/4” air hose (53-404A) and bedesignated by the part # OB14. BobcatBobcatCougarCougar

OB14-C5CART MOUNT

OC14-C5CART MOUNT

53-402AAAA 25’ HOSE SET(Available in 50’

and 100’ sets)

53-404AAAA 25’ HOSE SET(Available in 50’

and 100’ sets)

OB14-W5WALL MOUNT

OB14-W55WALL MOUNT

OC14-W5WALL MOUNT

OC14-W55WALL MOUNT

The CPR spray guns from CAT combine the transferefficiency of HVLP with the speed and finishquality of conventional air spray. The CPR guns areavailable in both the pressure and gravity versionsand include the new CPR air cap and the HVLP aircap, along with 3 different needle and nozzlesizes, multipurpose wrench, nozzle wrench,cleaning brush and mini regulator. These kitswill also be available with your standard pressureor gravity cups or the more popular 3M PPS.

CPRCAT Pressure Reduced

The FE-Line LCFM HVLP is our low CFMlightweight ergonomic spray gun. The21-1090 air cap only uses 6 CFM, whichenables the FE-Line LCFM to be operated with a2 HP compressor. This setup is designed for use witha low air consumption compressor.

CP-FELCFMLow CFM HVLP - PressureTJR. Techline JR. HVLP (Glaze)

The Techline TJR is an economically priced gravityfeed mini gun for use with a range of coatings fromtop coats to stains. This is great for all your touchup needs.

Coating Atomization Technologies: 337 S. Arthur Ave. Louisville, CO 80027 Tel: 888.820.4498 Fax: 303.438.5708www.spraycat.com

Superior Spray SystemsFrom C.A. Technologies Made in USA

The J100H is our low CFM gravity feed spraygun. The 21-1090 air cap only uses 6CFM, which enables the Jaguar 100H tobe operated with a 2 HP compressor. This setupis designed for use with a low air consumptioncompressor.

CP-J100HLow CFM HVLP - Gravity

C.A.Technologies is proud to introduce our new CAT-X professional grade spraygun. The CAT-X provides extreme atomization, handle ergonomics, and fluiddelivery superior to all the competitive guns on the market today. The CAT-Xincludes the HVLP air cap and the pressure reduced air cap to meet all thecodes and regulations throughout the United States. The CAT-X comes in fivedistinctive handle designs, allowing you to customize your finishing experience.

CAT-XCAT-EXtreme (HVLP / Pressure Reduced)


* Tip size may be changed based on the user’s speed of application* For best results please use the recommended air and fluid pressures listed


M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.Krys tal Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 25-30 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY

Reduce as needed to meet V isc ios ity CPR 1.3 X 2101 29 PSI 5-7 PSIReduce as needed to meet V isc ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITYReduce as needed to meet V isc ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITYReduce as needed to meet V isc ios ity OC14 OR OB14 411 15-18 PSI 420 PSI

Kle arV ar Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 15-19 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


Dur aV ar Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 25-30 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


Envir o V ar Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 20 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


High Pe r form ance Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIConve rs ion V arn is h Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITYV ISCOSITY FORD #4 15 SECONDS Reduce as needed to meet V isc ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI

Reduce as needed to meet V isc ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITYReduce as needed to meet V isc ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITYReduce as needed to meet V isc ios ity OC14 OR OB14 411 15-18 PSI 375 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.Krys tal Se ale r Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 25-30 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


Le ve l Se ale r Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 25-30 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.M agnaKle ar Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 25-30 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


M agnaM ax Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 25-30 SECONDS Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


High Pe r form ance Reduce as needed to meet V isc ios ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIWW Pr e -Cat Cle ar Reduce as needed to meet V isc ios ity CP-J100H 1.4 X 1090 15 PSI GRA V ITYV ISCOSITY FORD #4 25-30 SECONDS Reduce as needed to meet V isc ios ity CPR 1.3 X 2101 29 PSI 5-7 PSI

Reduce as needed to meet V isc ios ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITYReduce as needed to meet V isc ios ity CA T-X 1.5 X 1352 35 PSI GRA V ITYReduce as needed to meet V isc ios ity H20 OC14 OR OB14 409F 17 PSI 350 PSI

C LEAR TOPC OATS (POS T-C ATALYZE D )

SEALER (POST-CATALYZED)

C LEAR TOPC OATS (PR E -C ATALYZED )




M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.M agnaSand Se ale r Reduce as needed to meet V isc os ity CP-FELCFM 1.3 X 1090 15 PSI 4-6 PSIV ISCOSITY FORD #4 20-25 SECONDS Reduce as needed to meet V isc os ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY

Reduce as needed to meet V isc os ity CPR 1.3 X 2101 29 PSI 4-6 PSIReduce as needed to meet V isc os ity CPR-G-W 1.5 X 2101 29 PSI GRA V ITYReduce as needed to meet V isc os ity CA T-X 1.5 X 1352 35 PSI GRA V ITYReduce as needed to meet V isc os ity OC14 OR OB14 411 15-18 PSI 375 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.Wate r White V inyl Se ale r Reduce as needed to meet V isc os ity CP-FELCFM 1.3 X 1090 15 PSI 4-6 PSIV ISCOSITY FORD #4 13-18 SECONDS Reduce as needed to meet V isc os ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


Quick Dry V inyl Se ale r Reduce as needed to meet V isc os ity CP-FELCFM 1.3 X 1090 15 PSI 4-6 PSIV ISCOSITY FORD #4 13-18 SECONDS Reduce as needed to meet V isc os ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.Re s is tan t 5% - 10% C16036 Lac quer Thinner CP-FELCFM 1.5 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 30-35 SECONDS 5% - 10% C16036 Lac quer Thinner CP-J100H 1.7 X 1090 15 PSI GRA V ITY

5% - 10% C16036 Lac quer Thinner CPR 1.5 X 2101 29 PSI 5-7 PSI5% - 10% C16036 Lac quer Thinner CPR-G-W 1.7 X 2101 29 PSI GRA V ITY5% - 10% C16036 Lac quer Thinner CA T-X 1.7 X 1352 35 PSI GRA V ITY5% - 10% C16036 Lac quer Thinner OC14 OR OB14 409 15-18 PSI 560 PSI

Ste alth 25% C1621 Care Reduc er CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 22-25 SECONDS 25% C1621 Care Reduc er CP-J100H 1.4 X 1090 15 PSI GRA V ITY

25% C1621 Care Reduc er CPR 1.3 X 2101 29 PSI 5-7 PSI25% C1621 Care Reduc er CPR-G-W 1.7 X 2101 29 PSI GRA V ITY25% C1621 Care Reduc er CA T-X 1.7 X 1352 35 PSI GRA V ITY25% C1621 Care Reduc er OC14 OR OB14 409 15-18 PSI 560 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.M agnaM ax White / Opaque Bas e Reduce as needed to meet V isc os ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 30-35 SECONDS Reduce as needed to meet V isc os ity CP-J100H 1.4 X 1090 15 PSI GRA V ITY


High Pe r form ance Reduce as needed to meet V isc os ity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIPre -Cat White Reduce as needed to meet V isc os ity CP-J100H 1.7 X 1090 15 PSI GRA V ITYV ISCOSITY FORD #4 22-24 SECONDS Reduce as needed to meet V isc os ity CPR 1.3 X 2101 29 PSI 5-7 PSI

Reduce as needed to meet V isc os ity CPR-G-W 1.7 X 2101 29 PSI GRA V ITYReduce as needed to meet V isc os ity CA T-X 1.7 X 1352 35 PSI GRA V ITYReduce as needed to meet V isc os ity OC14 OR OB14 411 15-18 PSI 490 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.Claw lock II 10% Care Reducer or C160-36 CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 40-50 SECONDS 10% Care Reducer or C160-36 CP-J100H 1.7 X 1090 15 PSI GRA V ITY

10% Care Reducer or C160-36 CPR 1.3 X 2101 29 PSI 5-7 PSI10% Care Reducer or C160-36 CPR-G-W 1.7 X 2101 29 PSI GRA V ITY10% Care Reducer or C160-36 CA T-X 1.7 X 1352 35 PSI GRA V ITY10% Care Reducer or C160-36 OC14 OR OB14 409 15-18 PSI 560 PSI

Le ve l Pr im e r Reduce as needed to meet V isc os ity CP-FELCFM 1.7 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 40-50 SECONDS Reduce as needed to meet V isc os ity CP-J100H 1.7 X 1090 15 PSI GRA V ITY


P R IME R S/U N D ER C OATER S (P OS T-C ATALYZE D )

SEALER (PRE-CATALYZED)

SEALER (V INYL)

P IGME N TE D TOPC OATS (POS T-C ATALYZE D )

P IGME N TE D TOPC OATS (PR E -C ATALYZED )




M ATERIAL REDUCTION GUN / T ECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.M agnaClaw 10% C-160-36 Standard Thinner CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 40-50 SECONDS 10% C-160-36 Standard Thinner CP-J100H 1.7 X 1090 15 PSI GRA V ITY

10% C-160-36 Standard Thinner CPR 1.3 X 2101 29 PSI 5-7 PSI10% C-160-36 Standard Thinner CPR-G-W 1.7 X 2101 29 PSI GRA V ITY10% C-160-36 Standard Thinner CA T-X 1.7 X 1352 35 PSI GRA V ITY10% C-160-36 Standard Thinner OC14 OR OB14 409 15-18 PSI 490 PSI

unreduced OC14 OR OB14 411 15-18 PSI 490 PSIQuick Dry V inyl Pr im e r No Reduc tion Necess ary CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIV ISCOSITY FORD #4 40-50 SECONDS No Reduc tion Necess ary CP-J100H 1.7 X 1090 15 PSI GRA V ITY

No Reduc tion Necess ary CPR 1.3 X 2101 29 PSI 5-7 PSINo Reduc tion Necess ary CPR-G-W 1.7 X 2101 29 PSI GRA V ITYNo Reduc tion Necess ary CA T-X 1.7 X 1352 35 PSI GRA V ITYNo Reduc tion Necess ary OC14 OR OB14 409 15-18 PSI 490 PSINo Reduc tion Necess ary OC14 OR OB14 411 15-18 PSI 490 PSI

M ATERIAL REDUCTION GUN / T ECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.Am az ing Stain Reduce as needed to meet V isc os ity TJR 1.2 10 PSI GRA V ITY

Reduce as needed to meet V isc os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITYReduce as needed to meet V isc os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSIReduce as needed to meet V isc os ity CPR .8 X 2101 12-16 PSI 2-4 PSI

WoodSong II 2.5% Reduce as needed to meet V isc os ity TJR 1.2 10 PSI GRA V ITYSpr ay On ly Stain Bas e Reduce as needed to meet V isc os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY

Reduce as needed to meet V isc os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITYReduce as needed to meet V isc os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSIReduce as needed to meet V isc os ity CPR .8 X 2101 12-16 PSI 2-4 PSI

M icro ton Dye s Reduce as needed to meet V isc os ity TJR 1.2 10 PSI GRA V ITYV ISCOSITY FORD #4 8-9 SECONDS Reduce as needed to meet V isc os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITY

Reduce as needed to meet V isc os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITYReduce as needed to meet V isc os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSIReduce as needed to meet V isc os ity CPR .8 X 2101 12-16 PSI 2-4 PSI

M ATERIAL REDUCTION GUN / T ECHNOLOGY TIP / A IR CAP AIR PRESS. FLUID PRESS.V intage Alk yd Glaze Reduce as needed to meet V isc os ity TJR-GLA ZE GLA ZE TIP 0 PSI GRA V ITYV ISCOSITY FORD #4 15-17 SECONDS Reduce as needed to meet V isc os ity TJR 1.2 10 PSI GRA V ITY

Reduce as needed to meet V isc os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITY

Am az ing Glaze Reduce as needed to meet V isc os ity TJR-GLA ZE GLA ZE TIP 0 PSI GRA V ITYV ISCOSITY FORD #4 9-11 SECONDS Reduce as needed to meet V isc os ity TJR 1.2 10 PSI GRA V ITY

Reduce as needed to meet V isc os ity CPR-G-W 1.0 X 1301 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CA T-X 1.0 X 1411 12-15 PSI GRA V ITYReduce as needed to meet V isc os ity CP-J100H 1.0 X 1090 8-10 PSI GRA V ITYReduce as needed to meet V isc os ity CP-FELCFM .8 X 1090 8-10 PSI 2-4 PSIReduce as needed to meet V isc os ity CPR .8 X 2101 12-16 PSI 2-4 PSI

P R IME R S/U N D ER C OATER S (P R E-C ATALYZE D )

STAINS /DYES

GLAZES




M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.Aguatana 2k Reduce as needed to meet V iscosity H20-CPR 1.3 X 2101 29 PSI 5-7 PSIWater Borne Polyure thane Reduce as needed to meet V iscosity H20-CPR-G-W 1.7 X 2101 29 PSI GRAVITY

Reduce as needed to meet V iscosity CAT-X 1.7 X 1352 35 PSI GRAVITYVISCOSITY FORD #4 23 SECONDS Reduce as needed to meet V iscosity H20 OC14 OR OB14 409F 15-18 PSI 375 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.Agualente 5% Water CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIVISCOSITY FORD #4 35-45 SECONDS 5% Water CP-J100H 1.7 X 1090 15 PSI GRAVITY

5% Water H20-CPR 1.3 X 2101 29 PSI 5-7 PSI5% Water H20-CPR-G-W 1.7 X 2101 29 PSI GRAVITY5% Water CAT-X 1.7 X 1352 35 PSI GRAVITY5% Water H20 OC14 OR OB14 409F 17 PSI 350 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.High Perform ance 5% Water CP-FELCFM 1.3 X 1090 15 PSI 7-9 PSIWater Borne Production Sealer 5% Water CP-J100H 1.7 X 1090 15 PSI GRAVITYVISCOSITY FORD #4 25 SECONDS 5% Water H20-CPR 1.3 X 2101 29 PSI 7-9 PSI

5% Water H20-CPR-G-W 1.7 X 2101 29 PSI GRAVITY5% Water CAT-X 1.7 X 1352 35 PSI GRAVITY5% Water H20 OC14 OR OB14 409F 17 PSI 350 PSI

Agualente Sealer 5% Water CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIVISCOSITY FORD #4 35-45 SECONDS 5% Water CP-J100H 1.7 X 1090 15 PSI GRAVITY

5% Water H20-CPR 1.3 X 2101 29 PSI 5-7 PSI5% Water H20-CPR-G-W 1.7 X 2101 29 PSI GRAVITY5% Water CAT-X 1.7 X 1352 35 PSI GRAVITY5% Water H20 OC14 OR OB14 409F 17 PSI 350 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.Agualente White / Opaque Base Reduce as needed to meet V iscosity CP-FELCFM 1.3 X 1090 15 PSI 5-7 PSIVISCOSITY FORD #4 35-45 SECONDS Reduce as needed to meet V iscosity CP-J100H 1.7 X 1090 15 PSI GRAVITY

Reduce as needed to meet V iscosity H20-CPR 1.3 X 2101 29 PSI 5-7 PSIReduce as needed to meet V iscosity H20-CPR-G-W 1.7 X 2101 29 PSI GRAVITYReduce as needed to meet V iscosity CAT-X 1.7 X 1352 35 PSI GRAVITYReduce as needed to meet V iscosity H20 OC14 OR OB14 409F 17 PSI 350 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.Agualente Stain Block ing Prim er Reduce as needed to meet V iscosity CP-FELCFM 1.3 X 1090 15 PSI 7-9 PSIVISCOSITY FORD #4 40-50 SECONDS Reduce as needed to meet V iscosity CP-J100H 1.7 X 1090 15 PSI GRAVITY

Reduce as needed to meet V iscosity H20-CPR 1.3 X 2101 29 PSI 7-9 PSIReduce as needed to meet V iscosity H20-CPR-G-W 1.7 X 2101 29 PSI GRAVITYReduce as needed to meet V iscosity CAT-X 1.7 X 1352 35 PSI GRAVITYReduce as needed to meet V iscosity H20 OC14 OR OB14 409F 17 PSI 350 PSI

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.WoodSong II Reduce as needed to meet V iscosity TJR 1.2 10 PSI GRAVITYWater Borne Stain Base Reduce as needed to meet V iscosity CP-J100H 1.0 X 1090 8-10 PSI GRAVITY

Reduce as needed to meet V iscosity CPR-G-W 1.0 X 1301 12-15 PSI GRAVITYReduce as needed to meet V iscosity CAT-X 1.0 X 1411 12-15 PSI GRAVITY

M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.Water Borne Glaze Reduce as needed to meet V iscosity TJR-GLAZE W/ P-CUP GLAZE TIP 0 PSI 5-7 PSI

Reduce as needed to meet V iscosity TJR W/ PRES-CUP 1.4 10 PSI 5-7 PSI

GLAZES

CLEAR TOPCOATS (PRE-CATALYZED)

PRIMERS / UNDERCOATERS (PRE-CATALYZED)

STAINS / DYES

WATER BORNE PRODUCTSCLEAR TOPCOATS (POST-CATALYZED)

CLEAR TOPCOATS (PRE-CATALYZED)

SEALERS



H2O-CPRAvailable in gravity and pressure kitsStainless Steel Fluid PassagesPatented 12 point atomizationIncludes 3 needle & nozzle sizesIncludes HVLP and pressure reduced air capsAvailable with 3M PPS pressure cup system

H2O-Air Assist AirlessCAT is pleased to announce that our new waterborne equipment is available. We have labeled the equipment for this applica-tion so customers will not confuse the solvent based and water based units in their shops. The H2O AAA units help reduce thesheering of materials, eliminating many of the problems associated with spraying waterborne coatings.

Pump Designation:Bobcat Outfits H2O-OB14-C5-12-XXX-F

H2O-OB14-W5-12-XXX-FCougar Outfits H2O-OC14-C5-12-XXX-F

H2O-OC14-W5-12-XXX-F

H2O AAA outfits will include the following- Pre-atomizing fine finish opti-tip (36-XXX-F)- 100 Mesh gun handle filter- 1/2” Material pick-up tube- 3/16” Fluid hose with stainless steel couplings- Larger fluid passages

H2O-Air Blast Quick DryerH2O Air Blast Quick Dryer: Speeds drying time of waterborne coatings while reducing micro bubbles.54-540 Outfit - Includes 2 air blast guns,adjustable stand (height to 84”, width to 34”).Variable air flow control with low CFMconsumption (11.5 @ 50 psi) and high CFM output.

54-541 Gun Only - Air Blast Guns can be hand heldor mounted on stand.


M ATERIAL REDUCTION GUN / TECHNOLOGY TIP / AIR CAP AIR PRESS. FLUID PRESS.High Perform ance Reduce as needed to meet Viscosity CP-FELCFM 1.3 X 1090 15 PSI 7-9 PSIWater Borne Production Lacquer Reduce as needed to meet Viscosity CP-J100H 1.7 X 1090 15 PSI GRAVITYVISCOSITY FORD #4 26 SECONDS Reduce as needed to meet Viscosity H20-CPR 1.3 X 2101 29 PSI 7-9 PSI

Reduce as needed to meet Viscosity H20-CPR-G-W 1.7 X 2101 29 PSI GRAVITYReduce as needed to meet Viscosity CAT-X 1.7 X 1352 35 PSI GRAVITYReduce as needed to meet Viscosity H20 OC14 OR OB14 409F 17 PSI 350 PSI

LACQUERWATER BORNE PRODUCTS


1qt PPSCup System

Mini PPSPressure Cup

1qt PPSPressure Cup

1qt Pressure Cup w/ Regfor HVLP Guns

CAT91-498 CAT91-488 CAT91-483 CAT51-303R2

2 Quart OutfitsAvailable with 5’ Air and Fluid Hoses

CAT51-130Economy 2 qt

CAT51-600Bandit 2 qt

CAT51-600ABandit 2 qt w/ Air Agit

CAT51-672Anti - Tip Stand

Tank OutfitsAvailable with 25’ Air and Fluid Hoses

CAT51-2022.5 Gallon Tank

CAT51-5085 Gallon Tank

CAT51-5045 Gallon Tank w/ Air Agit

Cups and Tanks

Date post:	23-May-2018
Category:	Documents
Upload:	dangdien
View:	215 times
Download:	1 times

S E G L - C - USA -...

Documents