4

82

131,8

C C

33,

9

27,

7

SECTION C-C

STAN

DAR

D E

NCL

OSU

RES

STANDARD ENCLOSURES Casing for electronic devices made of ABS in the standards of RAL 9004 and RAL 7035 colour. It can be made of any material and any colour on request. External surfaces are polished, giving shine and improving the aesthetics of the casing, so that it can be mounted to any prominent position. The whole device is closed with four screws.

3D view and diagrams available on the website www.maszczyk.pl Infoline: +48 602 726 086 / e-mail: maszczyk@maszczyk.pl

KM-40

5www.maszczyk.pl

Bj – baterie joints Bs – baskets for batteries Bt – buttons

Cs – cord sleeveF – fibers Ff – front foil

FI – filters Fo – foot for enclosure G – gaskets

Gr – with grounding I – insertMk – membrane keyboard

P – plug for screws Pi – pins for transformators S – screws

So – socket without groundingSoGr – socket with grounding Sp – plastic screws

STA

ND

ARD

EN

CLO

SURE

S

STANDARD ENCLOSURES

SERIES APolystyrene material enclosures with rounded corners. Upon request ABS material available. Standard colours RAL 9004 and RAL 7035. Base of enclosures with integral PCB mounting studs. Polished surface finishing. Closing by four screws. Series B enclosures secured with only one screw. Matt surface finishing.

Model Website Length Width Height Material Accessories

Z-75 Series A 95 45 23 PS S

Z-76 Series A 109 60 28 PS S

Z-77 Series A 124 72 38 PS S

Z-78 Series A 154 83 43 PS S

Z-7A Series B 106 55 32 PS S

Z-7B Series B 106 55 23 PS S

Z-7C Series B 106 55 40 PS S

KM-40 Series C 130 80 35 ABS S, P

SERIES A & B

Z-75Z-7C

6

3D view and diagrams available on the website www.maszczyk.pl Infoline: +48 602 726 086 / e-mail: maszczyk@maszczyk.pl

STANDARD ENCLOSURES SERIES C TO E

Polystyrene or ABS material enclosures, available in RAL 9004 or RAL 7035 colours. Base of enclosure with integral mounting studs for PCB. Cover of Z-28, Z-79 and Z-80 has a lowering suitable for a membrane keyboard or display. Polished and matt surface finishing. Front closing by four screws. KM-40 available with screw covers. No screw required to KM-59 and KM-59B.

Model Website Length Width Height Material Accessories

Z-79 Series C 90 80 38 PS S

Z-80 Series C 119 89 38 PS S

KM-40 Series C 130 80 35 ABS S, P

KM-69 Series D 81 55 18 ABS S

KM-39 Series D 120 80 29 ABS S

Z-28 Series D 143 119 33 ABS S

KM-59 Series E 113 75 56 ABS

KM-59B Series E 113 75 47 ABS

KM-59BKM-39

7www.maszczyk.pl

Bj – baterie joints Bs – baskets for batteries Bt – buttons

Cs – cord sleeveF – fibers Ff – front foil

FI – filters Fo – foot for enclosure G – gaskets

Gr – with grounding I – insertMk – membrane keyboard

P – plug for screws Pi – pins for transformators S – screws

So – socket without groundingSoGr – socket with grounding Sp – plastic screws

STANDARD ENCLOSURES SERIES F & G

ABS material enclosure, available in RAL 9004 and RAL 7035 colours. Without any mounting studs inside. Secure with two screws. Matt surface finishing. Casing KM-82A with cut-outs at the cover for computer cable power.Base of Series G enclosures with integral PCB. guides and moun-ting studs. Polished surface finishing. Closing by four screws.

Model Website Length Width Height Material Accessories

KM-4 Series F 90 60 27 ABS

KM-82 Series F 68 55 32 ABS S

KM-82A Series F 68 55 32 ABS S

Z-113 Series G 150 88 20,5 ABS S, Bs

Z-118 Series G 97,6 59,8 18,6 ABS S, Bs

Z-124 Series G 184,6 144,5 38,6 ABS S

STA

ND

ARD

EN

CLO

SURE

S

KM-82AZ-126