8/12/2019 s Wager Brochure

1/2

Swaging is a special type of forging in which metal is formed by rapid succession of hammer blows. It is one of the

most economical methods ever employed to point tubing, rod, and wire for redraw- and to size, shape, reduce, taperand bond or form metal parts, hot or cold. Metal is formed- not machined- so there are no wasteful chips. Swaging

actually improves grain structure giving the part greater strength and an unusually fine finish.

STATIONARY DIE SWAGERS

LONG DIE SWAGERS

SWAGING DIES FOR ALL MAKES OF MACHINES

HYDROFORMERS

Fenn Hydroformers are widely used for assembling parts such as fittings onto

cable, and for making reductions between shoulders, such as those onconvoluted tubing. Hydroforming is a modification of the rotary swaging principle

whereby hydraulically operated wedges are used to close the dies while thespindle is rotating. In this way, work can be inserted before and removed after

swaging/

TUBE END FORMERS

Fenn Tube End Formers are used for a wide range of forming operation

and easy to use, they can be supplied for either air or hydraulic operatiotwo sizes for tubing up to 3 O.D., depending on operation and mater

EQUIPMENT OVERHAUL AND REPAIR

ROTARY SWAGERSIn a Rotary Swager, the dies and hammers revolve around the work, producing perfect symmetrical pieces with anexceptional finish. Fenn offers nine basic sizes of Rotary Swaging machines ranging in capacity from needle size to 6

O.D. tubing.

Rotary Swagers are available in two types: 2-die or 4-die, which can swage harder materials and generally achievegreater reductions per pass. See back page for capacities and dimensions of all models.

STATIONARY DIE SWAGERS

For Non-Circular Cross Sections. Because the dies and hammers do not revolve in a Stationary Die Swager, it is

possible to forge asymmetrical shapes never before produced by swaging. Two basic types are available:simultaneous blow (fluted shapes, circular cross sections) and the patented alternate blow (rectangular shapes,

squares and hexagons).

SWAGING DIES FOR MOST MAKES OF MACHINES

Dies are the very heart of swaging machines. Production of precision parts requires high quality dies. Its acoincidence that Fenn, the leading supplier of swaging machines, is also the leading supplier of swaging d

makes of swaging machines

There is no better source for dies than Fennin terms of quality, price, and delivery.

LONG DIE SWAGERSFor tapering tubing up to 24 long. Fenn Long Die Swaging Machines produce long, shallow tapers forfurniture legs, sporting goods, aerospace products, and more, economically and rapidly. These machines

serve a wide variety of materials: both welded and seamless tubing of either ferrous ornonferrous metals, from stainless steel to aluminum. Coolant/Slushing Systems, as shown, are availab

as an option on all size swagers.

We offer a complete overhaul and repair facility for all your swaging and metal forming machinery. Wrange of services from Swager Head ring installations to complete overhaul of your metal forming equ

receipt of equipment, a complete inspection is performed and the customer is contacted with the recorepairs prior to proceeding. Our facility is prepared with the necessary equipment to ensure the fasteturn around time on the repair or remanufacture of your machine with minimal downtime.

SWAGING MACHINESThe low cost way to point, reduce, and form rode, wire or tube

Model NF 2F 3F 4F 5F 6F 7F 8F

Capacity-Solid 1/16 13/32 5/8 15/16 1-1/2 2-1/4 2-3/4 3-3/8

Capacity-Tubing 1/4 1 1-3/4 2-1/4 3-3/8 4-1/2 5-1/2 6

PLEASE NOTE: Swager capacities listed above are for normal reduction on low-tensile material.Capacity must be reviewed for each specific application.

Machine 2FS &

2FSA

4FS &

4FSA

5FS &

5FSA

6FS &

6FSA

8FS &

8FSA

Capacity-Solid 13/32 15/16 1-1/2 2-1/4 3-3/8

Die Length 1 2-1/4 3-3/8 4-1/2 6

8/12/2019 s Wager Brochure

2/2

CAPACITIES & DIMENSIONS

ROTORY SWAGING MACHINES

*Please note: Swager capacities listed above are for normal reductions on 60,000 PSI tensile material. Capacity must be

reviewed for each specific application in light of material, reduction, angle of taper ect.

**Single phase motor- 110/220V

Model NF is bench mounted

Fenn Division- SPX Precision Components300 Fenn Road

Newington, CT 0611TEL 860.594.4300 FAX 860.667.4667

www.spxfenn.com

*MS/AN Type fittings through -12 Series

SWAGING MACHINESFOR REDUCING WIRE, TUBE AND ROD

METALFORMING WITHOUT CUTTING CH