Solder Paste Temp-recover Machine 1. PLC control, key parts imported electrical appliances production. 2. Each can of solder paste placed groove are independent of time control.Solder paste can automatically set time and sink, after solder paste complete recover temperature will automatically pop up. 3. In the case of a power outage, if set the time has not been achieved, the solder paste bottle will not be able to remove and avoid the mixed together with wrong. 4. Different types of solder paste pot, can be used on the same device. 5. 4 cans recover temp at the same time. 500 g solder paste each can, machine with more holes can be customized according to customer requirements. • Specification: • Characteristy: 1. Model:S-PT400 2. Voltage:220V(50Hz) 3. Air:0.4Mpa 4. Placed groove:4
Transcript
Solder Paste Temp-recover Machine
1. PLC control, key parts imported electrical appliances production. 2. Each can of solder paste placed groove are independent of time control.Solder paste can automatically set time and sink, after solder paste complete recover temperature will automatically pop up. 3. In the case of a power outage, if set the time has not been achieved, the solder paste bottle will not be able to remove and avoid the mixed together with wrong. 4. Different types of solder paste pot, can be used on the same device. 5. 4 cans recover temp at the same time. 500 g solder paste each can, machine with more holes can be customized according to customer requirements.
·Still manual to clean the stenil?·Does it safe?·And does it really clean after cleaned by manual?·If not clean enough,it will lead to the printing problem,have you ever met it?
·All pneumatic, no safe hidden trouble, avoid fire·Easy to operate, the price is cheap·Clean the stencil absolutely
Great cleaning effect, for BGA hole with Hole diameter 0.1 mm, 0.3 spacing of QFP or 0201 chip component hole ,all those can be cleaned completely.
S1688 Stencil Cleaner Machine
stencil for red gum
stencil for tin cream
1, No need electronic power, no fire and detonate caused.
2, Simple operation, only Start, Stop and Reset, that is all.
3, Protecting Environmental, water recycle.Also can use IPA, alcohol or hydrocarbons are allowed , we suggest to use environmentally friendly cleaning agent
4, Lower consumption: 2 filters (cost $40.00) can clean more 200 cycles.
5,The design of nozzle is low pressure and high flow , for drying methods , is normal temperature convection , without any damage for the stencil.
6,safaty and stablity, strong ability to clean,solvent- saving , small space occupied , full service
The handle (the United States - Southco) Pneumatic switch, indicator
light（Japan, SMC）
http://www.smthelp.com
Automatic, drainage system, more conducive to the production of flexible management
Replaceable modularized controller and the quick insert design, maintenance, maintenance easy and convenient.
http://www.smthelp.com
Add cleaning fluid (IPA, alcohol, general hydrocarbons can be, it is recommended to use kyzen water-based cleaning agent, environmental protection, safety).Best liquid capacity ：35L
