MINIATURE COMPACT WORLD-BEAM QS18 WORLD-BEAM Q20 MINI-BEAM S18/M18 T18 TM18 Q25 MIDSIZE FULLSIZE 127 Photoelectrics Sensors Fiber Optic Sensors Special Purpose Sensors Measurement & Inspection Sensors Vision Wireless Lighting & Indicators Safety Light Screens Safety Laser Scanners Fiber Optic Safety Systems Safety Controllers & Modules Safety Two-Hand Control Modules Safety Interlock Switches Emergency Stop & Stop Control More information online at bannerengineering.com S18, 10-30V dc Sensing Mode/LED Range Connection Models NPN Models PNP Excess Gain Beam Pattern OPPOSED OPPOSED 20 m 2 m S186E Emitter EGC-1 (p. 132) BP-1 (p. 133) 4-pin Euro QD S186EQ Emitter 2 m S18SN6R S18SP6R 4-pin Euro QD S18SN6RQ S18SP6RQ 65.0 mm S18 Polarized Retroreflective and Fixed-field Models Suffix LP and FF 65.0 mm M18 Polarized Retroreflective and Fixed-field Models Suffix LP and FF S18 and M18 Barrel-Mount Sensors • Features EZ-BEAM ® technology, with specially designed optics and electronics for reliable sensing without adjustments • Available in plastic threaded barrel sensor (S18) and stainless steel threaded barrel sensor (M18) • Completely epoxy-encapsulated to provide superior durability, even in harsh sensing environments • Uses innovative dual-indicator system to take the guesswork out of monitoring sensor performance • Available in models for ac or dc power • Includes advanced diagnostics to warn of marginal sensing conditions or output overload (dc models) • Meets rigorous IP69K standards for use in washdown applications ONLINE AUTOCAD, STEP, IGES & PDF M18 Opposed, Non-polarized Retroreflective and Diffuse Models Suffix E, R, L, D and DL 59.2 mm ø 18.0 mm S18 Opposed, Non-polarized Retroreflective and Diffuse Models Suffix E, R, L and D 59.2 mm ø 18.0 mm More on next page Infrared LED S18 DC Models page 127 M18 DC Models 127 S18 AC Models page 130 S18 and M18 DC Sensors Connection options: A model with a QD requires a mating cordset (see pages 131). For 9 m cable, add suffix W/30 to the 2 m model number (example, S18SP6R W/30). ACCESSORIES page 131 OPPOSED RETRO POLAR RETRO P DIFFUSE FIXED-FIELD Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Transcript
MINIATURE
COMPACT
WORLD-BEAM QS18
WORLD-BEAM Q20
MINI-BEAM
S18/M18
T18
TM18
Q25
MIDSIZE
FUllSIZE
127
PhotoelectricsSensors
Fiber OpticSensors
Special PurposeSensors
Measurement & Inspection Sensors
Vision
Wireless
Lighting &Indicators
Safety Light Screens
Safety Laser Scanners
Fiber OpticSafety Systems
Safety Controllers & Modules
Safety Two-Hand Control Modules
Safety Interlock Switches
Emergency Stop & Stop Control
More information online at bannerengineering.com
S18, 10-30V dc
Sensing Mode/lED Range Connection
ModelsNPN
ModelsPNP
ExcessGain
BeamPattern
OPPOSEDOPPOSED
20 m
2 m S186E Emitter
EGC-1(p. 132)
BP-1(p. 133)
4-pin Euro QD S186EQ Emitter
2 m S18SN6R S18SP6R
4-pin Euro QD S18SN6RQ S18SP6RQ
65.0 mm
S18 Polarized Retroreflective and Fixed-field Models
Suffix lP and FF 65.0 mm
M18 Polarized Retroreflective
and Fixed-field ModelsSuffix lP and FF
S18 and M18Barrel-Mount Sensors• Features EZ-BEAM® technology, with specially designed optics and electronics
for reliable sensing without adjustments
• Available in plastic threaded barrel sensor (S18) and stainless steel threaded barrel sensor (M18)
• Completely epoxy-encapsulated to provide superior durability, even in harsh sensing environments
• Uses innovative dual-indicator system to take the guesswork out of monitoring sensor performance
• Available in models for ac or dc power
• Includes advanced diagnostics to warn of marginal sensing conditions or output overload (dc models)
• Meets rigorous IP69K standards for use in washdown applications
ONlINE
AUTOCAD, STEP, IGES & PDF
M18 Opposed, Non-polarized Retroreflective and Diffuse Models
Suffix E, R, l, D and Dl
59.2 mm 59.2 mm
ø 18.0 mm
S18 Opposed, Non-polarized Retroreflective and Diffuse Models
Suffix E, R, l and D
59.2 mm
ø 18.0 mm
Moreon next page
Infrared LED
S18 DC Models page 127
M18 DC Models 127
S18 AC Models page 130
S18 and M18 DC Sensors
Connection options: A model with a QD requires a mating cordset (see pages 131).
For 9 m cable, add suffix W/30 to the 2 m model number (example, S18SP6R W/30).
ACCESSORIES
page131
OPPOSED
RETRO
POlAR RETRO
P
DIFFUSE
FIXED-FIElD
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SEN
SOR
SMINIATURE COMPACT MIDSIZE FULLSIZE
128 More information online at bannerengineering.com
ACCESSORIES
page131
S18, 10-30V dc
Sensing Mode/lED Range Connection
ModelsNPN
ModelsPNP
ExcessGain
BeamPattern
RETRORETRO
2 m†
2 m S18SN6l S18SP6lEGC-2(p. 132)
BP-2(p. 133)
4-pin Euro QD S18SN6lQ S18SP6lQ
POlAR RETRO
P 2 m†
2 m S18SN6lP S18SP6lPEGC-3(p. 132)
BP-3(p.133)
4-pin Euro QD S18SN6lPQ S18SP6lPQ
FIXED-FIELDFIXED-FIElD
0 - 25 mm Cutoff
2 m S18SN6FF25 S18SP6FF25 EGC-6(p. 132)
—4-pin Euro QD S18SN6FF25Q S18SP6FF25Q
0 - 50 mmCutoff
2 m S18SN6FF50 S18SP6FF50 EGC-7(p. 132)
—4-pin Euro QD S18SN6FF50Q S18SP6FF50Q
0 - 100 mm Cutoff
2 m S18SN6FF100 S18SP6FF100 EGC-8(p. 132)
—4-pin Euro QD S18SN6FF100Q S18SP6FF100Q
DIFFUSEDIFFUSE
100 mm2 m S18SN6D S18SP6D EGC-4
(p. 132)BP-4
(p. 133)4-pin Euro QD S18SN6DQ S18SP6DQ
300 mm2 m S18SN6Dl S18SP6Dl EGC-5
(p. 132)BP-5
(p. 133)4-pin Euro QD S18SN6DlQ S18SP6DlQ
M18, 10-30V dc Infrared LED Visible Red LED
Sensing Mode/lED Range Connection
ModelsNPN
ModelsPNP
ExcessGain
BeamPattern
OPPOSEDOPPOSED
20 m
2 m M186E Emitter
EGC-1(p. 132)
BP-1(p. 133)
4-pin Euro QD M186EQ Emitter
2 m M18SN6R M18SP6R
4-pin Euro QD M18SN6RQ M18SP6RQ
RETRORETRO
2 m†
2 m M18SN6l M18SP6lEGC-2(p. 132)
BP-2(p. 133)
4-pin Euro QD M18SN6lQ M18SP6lQ
POlAR RETRO
P 2 m†
2 m M18SN6lP M18SP6lPEGC-3(p. 132)
BP-3(p.133)
4-pin Euro QD M18SN6lPQ M18SP6lPQ
FIXED-FIELDFIXED-FIElD
0 - 25 mm Cutoff
2 m M18SN6FF25 M18SP6FF25 EGC-6(p. 132)
—4-pin Euro QD M18SN6FF25Q M18SP6FF25Q
0 - 50 mmCutoff
2 m M18SN6FF50 M18SP6FF50 EGC-7(p. 132)
—4-pin Euro QD M18SN6FF50Q M18SP6FF50Q
0 - 100 mm Cutoff
2 m M18SN6FF100 M18SP6FF100 EGC-8(p. 132)
—4-pin Euro QD M18SN6FF100Q M18SP6FF100Q
DIFFUSEDIFFUSE
100 mm2 m M18SN6D M18SP6D EGC-4
(p. 132)BP-4
(p. 133)4-pin Euro QD M18SN6DQ M18SP6DQ
300 mm2 m M18SN6Dl M18SP6Dl EGC-5
(p. 132)BP-5
(p. 133)4-pin Euro QD M18SN6DlQ M18SP6DlQ
(cont’d) Infrared LED Visible Red LED
Connection options: A model with a QD requires a mating cordset (see page 131).
For 9 m cable, add suffix W/30 to the 2 m model number (example, S18SP6D W/30).
† Retroreflective range is specified using one model BRT-3 retroreflector. Actual sensing range may differ, depending on the efficiency and reflective area of the retroreflector used. See Accessories section for more information.
Connection options: A model with a QD requires a mating cordset (see page 131).
For 9 m cable, add suffix W/30 to the 2 m model number (example, M18SP6D W/30).
† Retroreflective range is specified using one model BRT-3 retroreflector, unless otherwise noted. Actual sensing range may differ, depending on the efficiency and reflective area of the retroreflector used. See Accessories section for more information.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
MINIATURE
COMPACT
WORLD-BEAM QS18
WORLD-BEAM Q20
MINI-BEAM
S18/M18
T18
TM18
Q25
MIDSIZE
FUllSIZE
129
PhotoelectricsSensors
Fiber OpticSensors
Special PurposeSensors
Measurement & Inspection Sensors
Vision
Wireless
Lighting &Indicators
Safety Light Screens
Safety Laser Scanners
Fiber OpticSafety Systems
Safety Controllers & Modules
Safety Two-Hand Control Modules
Safety Interlock Switches
Emergency Stop & Stop Control
More information online at bannerengineering.com
S18 and M18 DC SpecificationsSupply Voltage and Current 10 to 30V dc (10% max. ripple); Supply current (exclusive of load current):
Opposed Emitters: 25 mA Opposed Receivers: 20 mAPolarized Retroreflective: 30 mA Non-polarized Retroreflective: 25 mAFixed-field: 35 mA Diffuse: 25 mA
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration Solid-state complementary dc switch; NPN (current sinking) or PNP (current sourcing), depending on model.The Dark Operate (DO) output may be wired as a normally open marginal signal alarm output, depending upon hookup to the power supply.
Output Rating 150 mA max. (each) in standard hookup. When wired for alarm output, the total load may not exceed 150 mA OFF-state leakage current: less than 1 µA at 30V dcON-state saturation voltage: less than 1V at 10 mA dc; less than1.5V at 150 mA dc
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs
Output Response Time Opposed: 3 milliseconds ON, 1.5 milliseconds OFF Polarized Retroreflective, Non-polarized Retroreflective, Fixed-field and Diffuse: 3 milliseconds ON/OFF
Delay at Power-up 100 milliseconds; outputs are non-conducting during this time
Repeatability Opposed: 375 microseconds Polarized Retroreflective, Non-polarized Retroreflective, Fixed-field and Diffuse: 750 microseconds. Repeatability and response are independent of signal strength.
Indicators Two lEDs: Green: Power is ON Yellow: Light Operate (LO) output is energized
Construction M18 models: stainless steel housingS18 models: thermoplastic polyester housingLenses are polycarbonate or acrylic; S18 and M18 models come with two jam nuts.
Environmental Rating Leakproof design rated NEMA 6P, IP67. QD models rated IP69K per DIN 40050-9.
Connections 2 m or 9 m attached cable, or 4-pin Euro-style quick-disconnect fitting. QD cordsets are ordered separately. See page 131.
Operating Conditions Temperature: -40° to +70° C Relative humidity: 90% at 50° C (non-condensing)
Vibration and Mechanical Shock
All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max., double amplitude 0.06-inch acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SEN
SOR
SMINIATURE COMPACT MIDSIZE FULLSIZE
132 More information online at bannerengineering.com
Retroreflective ModeS18/M18
1
10
100
0.1 m(0.33')
1 m(3.3')
10 m(33')
0.01 m(0.033')
1000
EXCESS
GAIN
DISTANCE
S18/M18 Series
Non-Polarized Retro
with BRT-3 Reflector
Range: 2 m lED:
Opposed ModeS18/M18
1
10
100
1 m(3.3')
10 m(33')
100 m(330')
0.1 m(0.33')
1000
EXCESS
GAIN
DISTANCE
S18/M18 Series
Opposed Mode
Range: 20 m lED:
EGC-1 EGC-2
= Infrared LED P = Visible Red LED Polarized
Excess Gain Curves (Diffuse and Fixed-Field mode performance based on 90% reflectance white test card†)
Diffuse ModeS18/M18
1
10
100
10 mm(0.4")
100 mm(4")
1000 mm(40")
1 mm(0.04")
1000
EXCESS
GAIN
DISTANCE
S18/M18 Series
Long RangeDiffuse ModeMaximum Gain
Minimum Gain
Range: 300 mm lED:
Fixed-Field ModeS18/M18
1
10
100
1 mm(0.04")
10 mm(0.4")
100 mm(4")
0.1 mm(0.004")
EXCESS
GAIN
DISTANCE
1000S18/M18 Series
Fixed-field modewith 25 mm far
limit cutoff
Ø 10 mm spot size @ 8 mm focusØ 10 mm spot size @ 25 mm cutoff
† Using 18% gray test card: Cutoff distance will be 95% of value shown.† Using 6% black test card: Cutoff distance will be 90% of value shown.
Cutoff: 25 mm lED:
Diffuse ModeS18/M18
1
10
100
10 mm(0.4")
100 mm(4")
1000 mm(40")
1 mm(0.04")
1000
EXCESS
GAIN
DISTANCE
S18/M18 Series
Short RangeDiffuse Mode
Maximum Gain
Minimum Gain
Range: 100 mm lED:
Polarized Retroreflective ModeS18/M18
1
10
100
0.1 m(0.33')
1 m(3.3')
10 m(33')
0.01 m(0.033')
1000
EXCESS
GAIN
DISTANCE
S18/M18 Series
Polarized Retro
with BRT-3 Reflector
Range: 2 m lED: P
EGC-3 EGC-4
EGC-5 EGC-6
Fixed-Field ModeS18/M18
1
10
100
1 mm(0.04")
10 mm(0.4")
100 mm(4")
0.1 mm(0.004")
EXCESS
GAIN
DISTANCE
1000S18/M18 Series
Fixed-field modewith 100 mm far
limit cutoff
Ø 10 mm spot size @ 20 mm focusØ 10 mm spot size @ 100 mm cutoff
† Using 18% gray test card: Cutoff distance will be 85% of value shown.† Using 6% black test card: Cutoff distance will be 75% of value shown.
Cutoff: 100 mm lED:
Fixed-Field ModeS18/M18
1
10
100
1 mm(0.04")
10 mm(0.4")
100 mm(4")
0.1 mm(0.004")
EXCESS
GAIN
DISTANCE
1000S18/M18 Series
Fixed-field modewith 50 mm far
limit cutoff
Ø 10 mm spot size @ 10 mm focusØ 10 mm spot size @ 50 mm cutoff
† Using 18% gray test card: Cutoff distance will be 90% of value shown.† Using 6% black test card: Cutoff distance will be 85% of value shown.
Cutoff: 50 mm lED:
EGC-7 EGC-8
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
MINIATURE
COMPACT
WORLD-BEAM QS18
WORLD-BEAM Q20
MINI-BEAM
S18/M18
T18
TM18
Q25
MIDSIZE
FUllSIZE
133
PhotoelectricsSensors
Fiber OpticSensors
Special PurposeSensors
Measurement & Inspection Sensors
Vision
Wireless
Lighting &Indicators
Safety Light Screens
Safety Laser Scanners
Fiber OpticSafety Systems
Safety Controllers & Modules
Safety Two-Hand Control Modules
Safety Interlock Switches
Emergency Stop & Stop Control
More information online at bannerengineering.com
Retroreflective ModeS18/M18
2.5 m(8.0')
2.0 m(6.4')
1.5 m(4.8')
1.0 m(3.2')
0.5 m(1.6')
0
0
40 mm
80 mm
120 mm
40 mm
80 mm
120 mm
0
1.6"
3.2"
4.7"
1.6"
3.2"
4.7"
DISTANCE
S18 SeriesNon-Polarized Retro
with BRT-3 Reflector
Range: 2 m lED:
Opposed ModeS18/M18
Effective Beam: 13 mm
25 m(82')
20 m(66'
15 m(49')
10 m(32')
5 m(16')
0
0
500 mm
1000 mm
1500 mm
500 mm
1000 mm
1500 mm
0
20"
40"
60"
20"
40"
60"
DISTANCE
S18 SeriesOpposed Mode
)
Range: 20 m lED:
BP-1 BP-2
= Infrared LED P = Visible Red LED Polarized
Beam Patterns (Diffuse mode performance based on 90% reflectance white test card)
Diffuse ModeS18/M18
400 mm(15")
320 mm(12")
240 mm(9")
160 mm(6")
80 mm(3")
0
0
5 mm
10 mm
15 mm
5 mm
10 mm
15 mm
0
0.2"
0.4"
0.6"
0.2"
0.4"
0.6"
DISTANCE
S18 SeriesLong Range Diffuse
Range: 300 mm lED:
Diffuse ModeS18/M18
125 mm(5")
100 mm(4")
75 mm(3")
50 mm(2")
25 mm(1")
0
0
5 mm
10 mm
15 mm
5 mm
10 mm
15 mm
0
0.2"
0.4"
0.6"
0.2"
0.4"
0.6"
DISTANCE
S18 SeriesShort Range Diffuse
Range: 100 mm lED:
Polarized Retroreflective ModeS18/M18
2.5 m(8.0')
2.0 m(6.4')
1.5 m(4.8')
1.0 m(3.2')
0.5 m(1.6')
0
0
50 mm
100 mm
150 mm
50 mm
100 mm
150 mm
0
2"
4"
6"
2"
4"
6"
DISTANCE
S18 SeriesPolarized Retro
with BRT-3 Reflector
Range: 2 m lED: P
BP-3 BP-4
BP-5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
More information online at bannerengineering.com744
REF
EREN
CE
More information online at bannerengineering.com744
HOOKUPS WIRING DIAGRAMS REFERENCE CHARTS GLOSSARY INTERNATIONAL REPS
DC01 Current Sinking (NPN)
10-30V dc–
+
3
1
4Load
Key
1 = Brown3 = Blue4 = Black
Current Sourcing (PNP)
10-30V dc–
+
3
1
4Load
3-Pin Pico
3 Pin 3 Wire
1 = Brown3 = Blue4 = Black
4
3 1
DC Hookups
DC02 Emitter
10-30V dc
–
+
3
1
Key
1 = Brown2 = White†
3 = Blue4 = Black†
† Not Used
3-Pin Pico 4-Pin Pico 4-Pin Euro 4-Pin Mini
3 Pin 3 Wire
1 = Brown3 = Blue4 = Black
4
3 14
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
14
31
2
DC03 Complementary Current Sinking (NPN)
3
1
4
2
10-30V dc–
+
Load
Load
Key
1 = Brown2 = White3 = Blue4 = Black
Complementary Current Sourcing (PNP)
3
1
4
2
10-30V dc–
+
Load
Load
4-Pin Pico 4-Pin Euro 4-Pin Mini
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
14
31
2
DC04 Bipolar (NPN + PNP)
10-30V dc–
+1
3
2
4
Load
Load
Key
1 = Brown2 = White3 = Blue4 = Black
4-Pin Pico 4-Pin Euro 4-Pin Mini
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
14
31
2
Moreon next page
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
745745
Accessories
Reference
Hookups
Wiring Diagrams
Glossary
International Reps
More information online at bannerengineering.com
DC Hookups
DC05 Complementary Current Sinking (NPN)Standard Hookup
3
1
4
2
10-30V dc–
+
Load
Load
Key
1 = Brown2 = White3 = Blue4 = Black
Current Sinking (NPN) PlusCurrent Sinking Alarm
3
1
4
2
10-30V dc–
+
Alarm
Load
4-Pin Pico 4-Pin Euro
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
1
DC06Complementary Current Sourcing (PNP)
Standard Hookup
3
1
4
2
10-30V dc–
+
Load
Load
Key
1 = Brown2 = White3 = Blue4 = Black
Current Sourcing (PNP) PlusCurrent Sourcing Alarm
3
1
4
2
10-30V dc–
+
Alarm
Load
4-Pin Pico 4-Pin Euro
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
1
DC07 Current Sinking (NPN)
3
1
4
2
10-30V dc
RemoteProgramming(N.O.)
+
–
Load
Key
1 = Brown2 = White3 = Blue4 = Black
Current Sourcing (PNP)
3
1
4
2
10-30V dc+
–
RemoteProgramming (N.O.)
Load
4-Pin Pico 4-Pin Euro
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
1
DC08 Bipolar (NPN + PNP)
3
1
2
4
5*
10-30V dc**
RemoteTeach
Load
Load
+
–
*NOTE: For some QS30 models, gray wire is used for LO/DO Select. See data sheet.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
