AG40LAG60L
Create your future
Linear Motor Driven Die-sinker EDM
Automation System Powered by
EROWA ROBOT COMPACT 80
Evolution for ...EROWA has improved the successful concept of the Robot Compact with
important features and increased performance.
Magazine level (example)
for two positions UPC 320
pallets. Reloading from the
integrated loading station
(option), 80 kg transfer
weight – the new dimension
at the low price segment!
Pull-out magazine levels:
Load the magazine with an
EROWA lift or ceiling crane,
directly on the magazine
position.
... practical applicationsApparent at first sight: EROWA has thought of the use in the workshop!
The pass-through, a new and ingenious solution to
magazine loading with electrode holders.
The magazine pull-out levels are released via
the integrated handle positions.
More power - attractive price
LN Professional
LN Professional provides various machined shapes and
conditions for all machining scenes. Moreover, it simply
offers electrodes and workpieces ex-change codes.
Arc-less & High Quality
The new "Arc-less" electrical discharge system features
further improved in machining performance and ensures
great reduction in machining time. Equipped with "SVC"
circuit as standard, high-quality surface finishing, satin
surface, and mirror surface can be achieved with great
ease.
Towards automation ...
Linear Motor Drive System
Linear motor drive system is the most ideal mechanism
which semi-permanently sustains high-speed axis-
movements and instantaneous response.
STARTER KIT A . . . FOR “ITS148“ PALLET (ONE DIE-SINKER EDM)
Machine Interface
2 set of Chuck Controls
(1x Table: Power Chuck, 1x Quill: ITS )
10 Positions of ITS 148 Pallet
(Incl. ITS148 Pallet 4pcs)
33 Positions of ITS Holders
(Incl. ITS Holder 24 pcs, Chucking Spigot 20 pcs)
STARTER KIT B . . . FOR “UPC“ PALLET (ONE DIE-SINKER EDM)
Machine Interface
2 set of Chuck Controls
(1x Table: UPC Chuck , 1x Quill: ITS )
4 Positions of UPC Pallet
(Incl. UPC Pallet 2 pcs, Gripper Link 2 pcs)
33 Positions of ITS Holders
(Incl. ITS Holder 24 pcs, Chucking Spigot 20 pcs)
Create your future
Sodick developed the AG Series based on a structure compatible to automation systems,
aiming for power savings and full automation.
In AG40L/AG60L, when the 3 sided auto up/down type machining tank is lowered,
the right and left sides of the machining tank are completely open,
therefore it can be accessed from the right or left sides of the machine.
Linear Motor Driven Die-sinker EDM Automation System
AG40L/AG60L EROWA ROBOT COMPACT 80Specification sheet
EX) Advanced Automation System: AG60L x 2 Units + ERC80
Printed in Japan
3-12-1, Nakamachidai, Tsuzuki-ku, Yokohama, Kanagawa224-8522 JapanTEL: 81-45-942-3111 FAX: 81-45-943-7880
●�The export of Sodick's products and its related technologies (including software applications) is regulated under Japan's Foreign Exchange and Foreign Trade Control Law. In addition, because some of these products may be subject to re-export controls under the Export Administration Regulations (EAR) of the United States; please contact Sodick before offering or exporting these products overseas.
●This catalogue contains a photographic image that has been generated from 3DCG.●��Due to ongoing research, specifications are subject to change without prior notice.●The contents of this catalog is current as of May, 2015.
http://www.sodick.jp
S2015401.2015.06<01>
AG40L&AG60L Specification sheetMachine tool
Work table size (W x D)Work tank inner dimensions (W x D x H)Work tank fluid level (Min. to Max.)Work tank capacityX x Y x Z axis travel
Clamping chuck Max. weight of workpieceMax. thrustDistance from floor to table top
Machine tool dimensions (W x D x H)
Machine tool weightTotal power input
Automatic
AG40L
600 x 400mm750 x 620 x 350mm
100 - 300mm190 Liter
400 x 300 x 270mm
550kg50kg
830mm1550 x 2440 x 2330mm
(Including CNC and dielectric tank)4000kg
3 phase 50/60 Hz 10kVA
AG60L
750 x 550mm950 x 740 x 450mm
150 - 400mm330 Liter
600 x 420 x 370mm
1500kg50kg
850mm1740 x 2785 x 2570mm
(Including CNC and dielectric tank)5150kg
3 phase 50/60 Hz 10kVA
EROWA COMBI ER-020025EROWA ITS ER-007521
Dielectric tankAG40L
oil285 Liter
Replaceable paper filter
AG60L
oil465 Liter
Replaceable paper filters
DielectricCapacityFilteration method
CNC power supply LN2Max. machining current
EDM section power supply
Power requirementNC unitSimultaneous control axesMin. input commandMin. drive unit
AJC speed
Max. feed rateControl systemDrive mechanism
40AOptimum pulse control TMM3 power supply (contains an "Arc-less", SVC circuit, ACS circuit)200/220 V 50/60 HzMulti-tasking OS, K-SMC-LINK methodMax. 4 axes 0.1 µm 0.1 µmMax. 10 m/min Max. 36 m/min 6 m/minFull closed loop (linear scale) Linear motor
X, Y axisZ axis
X, Y, Z axis
EROWA COMPACT 80 (Robot System)Transfer weightWeight per levelWeight per rack magazineSystem size ( L x W x H)
80 kgup to 180 kg1000 kg2014 x 1069 x 2612 mm
◆ The specification may change without prior notice due to constant research.
◆ It is necessary to adjust the air pressure manually, depending on suspended weight. The auto type is also available as an option.