Sa-elcb10 Full Line 08 - Canaletas Panduit

8/13/2019 Sa-elcb10 Full Line 08 - Canaletas Panduit

1/52For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)

ELECTRICAL SOLUTIONS

C

M

I

From the smallest wall mounted panels to the largest integrated turnkey systemsPANDUIT P ANDUCT

Wiring Duct is the premium wire management solution for routing and concealing wiring in

control panels. P ANDUCT Wiring Duct provide solutions for the original equipment manufacturtransportation, contract manufacturing, maintenance and repair and communications maAll P ANDUCT Wiring Duct are UL Recognized and CSA Certified and most carry the CE mark.

WIRINGDUCT

PANDUIT continues to develop newP ANDUCT Wiring Duct solutions to satisfy the challenges facing ocustomers worldwide. The new type HN hinged cover wiring duct features narrow sexcellent high-density wire management. Plus the exclusive hinged cover provides conchannel access resulting in up to 20% faster wiring changes for reduced labor costs. Maxiutilization of enclosure space withP ANEL M AX Corner Wiring Duct, which fits into the corner oenclosures and provides up to five square feet of additional subpanel space for mountingcomponents or up to 20% savings in enclosure footprint area.

Some of the features and benefits found inP ANDUCT Wiring Duct include:

Smooth corners and edges that willnot abrade wiring or irritate hands

Integrated nonskid liners and unique cover

designs insure the duct cover will not slideonce installed or during vibration

Specially formulated lead-free PVCmaterial meets the NFPA79: 2007 flameretardancy requirements and carries a UL94V-0 flammability rating

Scorelines for easy removal of duct fingersand sidewalls

Accessories and tools that increaseproductivity and lower the installed cost


2/52


C1.2

B2.Cable

ccessories

C1.WiringDuct

C3.Abrasionrotection

C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.

re-PrintedWrite-OnMarkers

F.Index

B3.Stainlessteel Ties

C2.SurfaceRaceway

E5.ockout/

Tagout& Safetyolutions

B1.able Ties

A.System

Overview

D3.roundingonnectors

E4.ermanententification

Wiring Duct for Control Panel Applications

53

For information on FL Wiring Duct and other P ANDUCT Accessories see pages C1.25 C1.32

12A

A

6 4




C

M

I

P ANDUCT P ANEL M AX Corner Wiring Duct(pages C1.4 C1.5)1

P ANDUCT Type H Wide Slot andHN Narrow Slot Hinged Cover Wiring Duct(pages C1.6 C1.7)

2

P ANDUCT Type F Narrow Slot Wiring Duct(pages C1.10 C1.11)3

P ANDUCT Type G Wide Slot Wiring Duct(pages C1.8 C1.9)4

P ANDUCT Type MC Metric Wiring Duct(pages C1.14 C1.15)5

P ANDUCT Type D Flush Cover Round HoleWiring Duct (pages C1.12 C1.13)6


4/52


Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD .C1.4

B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



ConventionalWiring Duct

Space Savings withP ANEL M AX CornerWiring Duct

UnusedPanel Space

Space is lost atthe edges of themounting panels.

PanelSpace Gain

Up to 5 square feet ofadditional mounting space

gained per enclosure.*

Enclosure cornertop view

*Actual subpanel space savings will vary depending on wiring duct size, component layout, and enclosure size and type. Footprint savings is based oncommercially available enclosures and may not be achievable in some applications.

Features and Benefits P ANDUCT P ANEL M AX Corner Wiring Duct

P ANDUCT

Divider WallCreates separate wiring channelswithin the wiring duct base. Availablein solid or slotted wall styles.See page C1.26.

Up to a 20% reduction in enclosure footprint size ispossible vs. a conventional wiring duct installation.*

P ANDUCT Installation ToolsWide selection of hand tools forcutting and installing wiring duct.See page C1.34.

P ANDUCT Nylon RivetsFast, lowest cost mounting method.See page C1.34.

P ANDUCT

Type C Coverwith Protective FilmReduces scrap and labor costsby protecting the surface duringstorage, handling, and installation.See page C1.5.

One-piece basereduces fastenersrequired for minimalinstallation time

Upper andlowerscorelinesallow easyfinger andsidewallsectionremoval

Co-extrudedhinged base

sits flat forcutting andalso conformsto cornerfor installation

Integraldivider wallmount featurein base

Speciallyformulatedlead-free PVCmaterial

Both sizes use2 inch Type Ccover (C2)




C

M

I

P ANEL M AX Corner Wiring Duct

Fits in the unused space in the vertical corner of enclosures,gaining subpanel space or saving enclosure footprint area

One-piece base requires less time to install thanmulti-piece solutions

Optional quick mount clips engage anywhere along the productbase further reducing assembly costs

PANDUIT divider wall snaps directly to the integrated mountingfeature in the channel to create two separate channels

Compatible with PANDUIT 3 inch and 4 inch height wiring duct;both product sizes uses standard 2 inch wiring duct cover

Base and cover length is 6 feet

.50 TYP [12.7]

.20 TYP [5.0]

Part number shown in LG (Light Gray) color, also available in WH (White) color. Product available in 6' lengths.

To order cover with protectivefilm add F to part number.6" inch cover not available withprotective film.

CDLB

CDCLP

Part Number Part Description Fastener Size

Std.Pkg.Qty.

Std.Ctn.Qty.

Quick Mount ClipsCDLB3 L-bracket with quick mounting clip for

installing CWD3 to back panel only.#10-32 x 1/4 (user supplied) 16

CDLB4 L-bracket with quick mounting clip for

installing CWD4 to back panel only.

#10-32 x 1/4 (user supplied) 16

CDCLP3 Quick mounting clip for installingCWD3 corner wiring duct.


CDCLP4 Quick mounting clip for installingCWD4 corner wiring duct.


H

W

BasePart Number

Duct Size W x H(In.)

Slot Width CoverPart Number

Std.Pkg.Qty.

BaseCtn.Qty.

CoverCtn.Qty.In. mm

CWD3LG6 4.40 x 3.57 .20 5.0 C2LG6 6 24 120CWD4LG6 5.33 x 4.58 .20 5.0 C2LG6 6 24 120CWD3WH6 4.40 x 3.57 .20 5.0 C2WH6 6 24 120CWD4WH6 5.33 x 4.58 .20 5.0 C2WH6 6 24 120


6/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Upper and lower scoreline allows easy fingers andsidewall section removal saving installation time

Dual-sided hinge coveropens up to 100 from eithersidewall of duct for up to 20%

faster wiring changes

Robust channelprofile withstands aside impact force upto two times greaterthan conventionalwiring duct

Specially formulatedlead-free PVC material

Cover retention flangeenables simple push-oninstallation, saving timeand hassle

Cover removal rib eases cover openingfor quick channel access duringwiring changes

Features and Benefits P ANDUCT Type H and HN Hinged Cover Wiring Duct

Available in eight sizes from 1.5" x 2" up to 4" x 4" in light gray, black, and white colors.

Labor Savings

By avoiding the time and hassle in removing and replacing covers, simple wiring changes can be made up to 20% fastercompared to conventional wiring duct installations*

Covers represent 20% of the cost of the wiringduct purchase

Misplaced covers are a common occurrence afteryears of use

Not needing to remove covers during maintenanceensures better aesthetics and safety and avoidsthe cost to replace lost covers

Avoid Cover Replacement Costs % of Wiring Duct Cost

20% 40% 60% 80% 100%0%

Base Cover

*Based on mock panel installations of type H hinged cover wiring duct and other commonly available wiring ducts adding a single component with four wires.

P ANDUCT Wire RetainersContain wiring when duct cover isopened. Wire retainers snap easily

between duct fingers.See page C1.28.


P ANDUCT Divider WallCreate separate wiring channelswithin the wiring duct base. Available

in solid or slotted wall styles.See page C1.26.





C

M

I

P ANDUCT Type HN Hinged Cover Narrow Slot Wiring Duct Narrow slot/finger design provides excellent wire management with

smaller wire diameters and high-density components such asterminal blocks, input/output devices, and other hardware

Material: Lead-free PVC UL Recognized continuous use temperature: 122F (50C)

UL 94 flammability rating of V-0 Conforms with NFPA 79-2007 section 13.3.1 requirement for flame

retardant material Provided with mounting holes Base and cover length is 6 feet

Part Number shown for LG (Light Gray). Available in WH (White).Base and cover sold separately.*H dimension includes duct and cover.

.20 TYP [5.0]

.50 TYP [12.7]

Multiple slot restrictors present with2" and greater duct wall height.

P ANDUCT Type H Hinged Cover Wide Slot Wiring Duct Wide slot/finger design provides excellent wire management in

general purpose applications and is compatible a wide range ofwire sizes and component types

Material: Lead-free PVC Rated for continuous use temperature: 122F (50C)

UL 94 flammability rating of V-0 Conforms with NFPA 79-2007 section 13.3.1 requirement for flame

retardant material Provided with standard mounting holes Base and cover length is 6 feet

Part Number shown for LG (Light Gray). Available in BL (Black) and WH (White).Base and cover sold separately.*H dimension includes duct and cover.W

H

W

H

W

H

P ANDUCT Type HS Hinged Cover Solid Wall Raceway Solid wall raceway conceals and protects wiring in continuous runs

such as in low-voltage cord management applications betweencontrol panel stations in conveyor systems

Material: Lead-free PVC

UL recognized continuous use temperature: 122F (50C) UL 94 flammability rating of V-0 Supplied without mounting holes Base and cover length is 6 feet

Part Number shown for LG (Light Gray). For BL (Black) and WH (White) colors see color selection guide,page C1.48.Base and cover sold separately.*H dimension includes duct and cover.

For 2" duct height: .31" [7.9] .80" [20.3]3" to 4" duct height: .31" [7.9] 1.00" [25.4]

FE

F

E

BasePart Number

Duct Size W x H* Slot Width Cover PartNumber

Std.Pkg.Qty

BaseCtn.Qty.

CoverCtn.Qty.In. mm In. mm

HN1.5X2LG6 1.75 x 1.98 44.5 x 50.3 .20 5.0 HC1.5LG6 6 120 120HN1.5X3LG6 1.75 x 3.06 44.5 x 77.7 .20 5.0 HC1.5LG6 6 120 120HN2X2LG6 2.17 x 1.98 55.1 x 50.3 .20 5.0 HC2LG6 6 120 120HN2X3LG6 2.17 x 3.06 55.1 x 77.7 .20 5.0 HC2LG6 6 60 120HN2X4LG6 2.17 x 4.10 55.1 x 104.1 .20 5.0 HC2LG6 6 60 120HN3X3LG6 3.25 x 3.06 82.6 x 77.7 .20 5.0 HC3LG6 6 60 120HN3X4LG6 3.25 x 4.10 82.6 x 104.1 .20 5.0 HC3LG6 6 60 120HN4X4LG6 4.25 x 4.10 108.0 x 104.1 .20 5.0 HC4LG6 6 60 60

BasePart Number

Duct Size W x H* Slot Width Cover PartNumber

Std.Pkg.Qty

BaseCtn.Qty.


H1.5X2LG6 1.75 x 1.98 44.5 x 50.3 .31 7.9 HC1.5LG6 6 120 120H1.5X3LG6 1.75 x 3.06 44.5 x 77.7 .31 7.9 HC1.5LG6 6 120 120H2X2LG6 2.17 x 1.98 55.1 x 50.3 .31 7.9 HC2LG6 6 120 120H2X3LG6 2.17 x 3.06 55.1 x 77.7 .31 7.9 HC2LG6 6 60 120H2X4LG6 2.17 x 4.10 55.1 x 104.1 .31 7.9 HC2LG6 6 60 120H3X3LG6 3.25 x 3.06 82.6 x 77.7 .31 7.9 HC3LG6 6 60 120H3X4LG6 3.25 x 4.10 82.6 x 104.1 .31 7.9 HC3LG6 6 60 120H4X4LG6 4.25 x 4.10 108.0 x 104.1 .31 7.9 HC4LG6 6 60 60

BasePart NumberDuct Size (W x H)*

CoverPart Number

Std.

Pkg.Qty.

Base

Ctn.Qty.

Cover

Ctn.Qty.In. mmHS1.5X2LG6NM 1.75 x 1.98 44.5 x 50.3 HC1.5LG6 6 120 120HS1.5X3LG6NM 1.75 x 3.06 44.5 x 77.7 HC1.5LG6 6 60 120HS2X2LG6NM 2.17 x 1.98 55.1 x 50.3 HC2LG6 6 120 120HS2X3LG6NM 2.17 x 3.06 55.1 x 77.7 HC2LG6 6 60 120HS2X4LG6NM 2.17 x 4.10 55.1 x 104.1 HC2LG6 6 60 120HS3X3LG6NM 3.25 x 3.06 82.6 x 77.7 HC3LG6 6 60 120HS3X4LG6NM 3.25 x 4.10 82.6 x 104.1 HC3LG6 6 60 120HS4X4LG6NM 4.25 x 4.10 108.0 x 104.1 HC4LG6 6 60 60


8/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Exclusive PANDUIT smoothrounded edges preventswiring abrasion


Non-slip cover liner

prevents cover slide

Upper and lower scorelines allowseasy finger and sidewall sectionremoval saving installation time

Flush cover designprovides a neat and

finished appearance

Wide finger/slot designprovides greater rigidityand allows use with awide range of wire andbundle sizesRestricted slot design

retains wires, eliminatinghassle and saving time

Features and Benefits P ANDUCT Type G Wide Slot Wiring Duct

Available in 36 sizes from .5" x .5" up to 6" x 4" in a variety of colors.

P ANDUCT Wire RetainersContain wiring when duct cover isopened. Wire retainers snap easilybetween duct fingers.See page C1.28.


P ANDUCT Divider WallCreate separate wiring channelswithin the wiring duct base. Availablein solid or slotted wall styles.See page C1.26.


P ANDUCT Type C Coverwith Protective FilmReduces scrap and labor costsby protecting the surface duringstorage, handling, and installation.See page C1.9.




C

M

I

P ANDUCT Type G Wide Slot Wiring Duct Wide slot/finger design provides greater sidewall rigidity and can

be used with a wide range of wire bundle sizes Material: Lead-free PVC UL recognized continuous use temperature: 122F (50C) UL 94 flammability rating of V-0

Conforms with NFPA 79-2007 section 13.3.1 requirement for flameretardant material

Provided with mounting holes Base and cover length is 6 feet

Part number shown for LG (Light Gray). For other color availability see color selection guide, page C1.48.Base and cover sold separately.*H dimension includes duct and cover.

W

H

To order cover with protective filmadd F to part number. 6" covernot available with film.

F

E

For .5" duct height: .37" [9.4] .80" [20.3].75" to 2" duct height: .31" [7.9] .80" [20.3]3" to 4" duct height: .31" [7.9] 1.00" [25.4]

5" duct height: .38" [9.4] 1.33" [33.8]

FE

BasePart Number

Duct Size (W x H)* Slot Width Cover PartNumber

Std.Pkg.Qty.

BaseCtn.Qty.


G.5X.5LG6 .69 x .60 17.5 x 15.2 .38 9.7 C.5LG6 6 120 120G.5X1LG6 .69 x 1.06 17.5 x 26.9 .31 7.9 C.5LG6 6 120 120G.5X2LG6 .69 x 2.03 17.5 x 51.6 .31 7.9 C.5LG6 6 120 120G.5X4LG6 .69 x 4.10 17.5 x 104.1 .31 7.9 C.5LG6 6 60 120G.75X.75LG6 .93 x .82 23.6 x 20.8 .31 7.9 C.75LG6 6 120 120G.75X1LG6 .93 x 1.06 23.6 x 26.9 .31 7.9 C.75LG6 6 120 120G.75X1.5LG6 .93 x 1.57 23.6 x 39.9 .31 7.9 C.75LG6 6 120 120G.75X2LG6 .93 x 2.03 23.6 x 51.7 .31 7.9 C.75LG6 6 120 120

G1X1LG6 1.26 x 1.12 32.0 x 28.4 .31 7.9 C1LG6 6 120 120G1X1.5LG6 1.26 x 1.62 32.0 x 41.1 .31 7.9 C1LG6 6 120 120G1X2LG6 1.26 x 2.12 32.0 x 53.8 .31 7.9 C1LG6 6 120 120G1X3LG6 1.26 x 3.12 32.0 x 79.2 .31 7.9 C1LG6 6 120 120G1X4LG6 1.26 x 4.10 32.0 x 104.1 .31 7.9 C1LG6 6 60 120G1.5X1LG6 1.75 x 1.12 44.5 x 28.4 .31 7.9 C1.5LG6 6 120 120G1.5X1.5LG6 1.75 x 1.62 44.5 x 41.1 .31 7.9 C1.5LG6 6 120 120G1.5X2LG6 1.75 x 2.12 44.5 x 53.8 .31 7.9 C1.5LG6 6 120 120G1.5X3LG6 1.75 x 3.12 44.5 x 79.2 .31 7.9 C1.5LG6 6 120 120G1.5X4LG6 1.75 x 4.10 44.5 x 104.1 .31 7.9 C1.5LG6 6 60 120G2X1LG6 2.25 x 1.12 57.2 x 28.4 .31 7.9 C2LG6 6 120 120G2X1.5LG6 2.25 x 1.62 57.2 x 41.1 .31 7.9 C2LG6 6 120 120G2X2LG6 2.25 x 2.12 57.2 x 53.8 .31 7.9 C2LG6 6 120 120G2X3LG6 2.25 x 3.12 57.2 x 79.2 .31 7.9 C2LG6 6 60 120G2X4LG6 2.25 x 4.10 57.2 x 104.1 .31 7.9 C2LG6 6 60 120G2X5LG6 2.25 x 5.10 57.2 x 129.5 .38 9.7 C2LG6 6 60 120G2.5X3LG6 2.75 x 3.12 69.9 x 79.2 .31 7.9 C2.5LG6 6 120 120G3X1LG6 3.25 x 1.12 82.6 x 28.4 .31 7.9 C3LG6 6 120 120G3X2LG6 3.25 x 2.12 82.6 x 53.8 .31 7.9 C3LG6 6 120 120G3X3LG6 3.25 x 3.12 82.6 x 79.2 .31 7.9 C3LG6 6 60 120G3X4LG6 3.25 x 4.10 82.6 x 104.1 .31 7.9 C3LG6 6 60 120G3X5LG6 3.25 x 5.10 82.6 x 129.5 .38 9.7 C3LG6 6 60 120G4X1.5LG6 4.25 x 1.62 108.0 x 41.1 .31 7.9 C4LG6 6 120 120G4X2LG6 4.25 x 2.12 108.0 x 53.8 .31 7.9 C4LG6 6 60 120G4X3LG6 4.25 x 3.12 108.0 x 79.2 .31 7.9 C4LG6 6 60 120G4X4LG6 4.25 x 4.10 108.0 x 104.1 .31 7.9 C4LG6 6 60 120G4X5LG6 4.25 x 5.10 108.0 x 129.5 .38 9.7 C4LG6 6 60 120G6X4LG6 6.25 x 4.15 158.8 x 105.4 .31 7.9 C6LG6 6 60 120


10/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Exclusive PANDUIT smooth rounded edgesprevents wiring abrasion

Non-slip cover linerprevents cover slide

Upper and lower scorelines allows easy fingersand sidewall section removal saving installation time

Flush coverdesign provides aneat appearance

Narrow finger/slot designclosely matches the spacingof high-density components

Double restricted slot designretains wires, eliminating hassle

and saving time


Features and Benefits P ANDUCT Type F Narrow Slot Wiring Duct


P ANDUCT Wire Retainers forType F Wiring DuctContain wiring when duct cover isopened. Wire retainers snap easilybetween duct fingers.See page C1.28.








C

M

I

P ANDUCT Type F Narrow Slot Wiring Duct Narrow slot/finger design provides more slots to fit the spacing of

high-density terminal blocks and other hardware Material: Lead-free PVC UL recognized continuous use temperature: 122F (50C) UL 94 flammability rating of V-0




W

H


.20 TYP [5.0]

.50 TYP [12.7]

Multiple slot restrictors present with2" and greater duct wall height.

BasePart Number

Duct Size (W x H)* Slot Width CoverPart Number

Std.Pkg.Qty.

BaseCtn.Qty.


F.5X.5LG6 .69 x .60 17.5 x 15.2 .20 5.0 C.5LG6 6 120 120F.5X1LG6 .69 x 1.06 17.5 x 26.9 .20 5.0 C.5LG6 6 120 120F.75X.75LG6 .93 x .82 23.6 x 20.9 .20 5.0 C.75LG6 6 120 120F.75X1.5LG6 .93 x 1.57 23.6 x 39.9 .20 5.0 C.75LG6 6 120 120F1X1LG6 1.26 x 1.13 32.0 x 28.7 .20 5.0 C1LG6 6 120 120F1X1.5LG6 1.26 x 1.62 32.0 x 41.1 .20 5.0 C1LG6 6 120 120F1X2LG6 1.26 x 2.12 32.0 x 53.8 .20 5.0 C1LG6 6 120 120F1X3LG6 1.26 x 3.12 32.0 x 79.2 .20 5.0 C1LG6 6 120 120F1X4LG6 1.26 x 4.10 32.0 x 104.1 .20 5.0 C1LG6 6 60 120F1.5X1LG6 1.75 x 1.12 44.5 x 28.4 .20 5.0 C1.5LG6 6 120 120F1.5X1.5LG6 1.75 x 1.62 44.5 x 41.1 .20 5.0 C1.5LG6 6 120 120F1.5X2LG6 1.75 x 2.12 44.5 x 53.8 .20 5.0 C1.5LG6 6 120 120F1.5X3LG6 1.75 x 3.12 44.5 x 79.2 .20 5.0 C1.5LG6 6 120 120F1.5X4LG6 1.75 x 4.10 44.5 x 104.1 .20 5.0 C1.5LG6 6 60 120F2X1LG6 2.25 x 1.12 57.2 x 28.4 .20 5.0 C2LG6 6 120 120F2X1.5LG6 2.25 x 1.62 57.2 x 41.1 .20 5.0 C2LG6 6 120 120F2X2LG6 2.25 x 2.12 57.2 x 53.8 .20 5.0 C2LG6 6 120 120F2X3LG6 2.25 x 3.12 57.2 x 79.2 .20 5.0 C2LG6 6 60 120F2X4LG6 2.25 x 4.10 57.2 x 104.1 .20 5.0 C2LG6 6 60 120F2X5LG6 2.25 x 5.10 57.2 x 129.5 .20 5.0 C2LG6 6 60 120F2.5X3LG6 2.75 x 3.12 69.9 x 79.2 .20 5.0 C2.5LG6 6 120 120

F3X1LG6 3.25 x 1.12 82.6 x 28.4 .20 5.0 C3LG6 6 120 120F3X2LG6 3.25 x 2.12 82.6 x 53.8 .20 5.0 C3LG6 6 120 120F3X3LG6 3.25 x 3.12 82.6 x 79.2 .20 5.0 C3LG6 6 60 120F3X4LG6 3.25 x 4.10 82.6 x 104.1 .20 5.0 C3LG6 6 60 120F3X5LG6 3.25 x 5.10 82.6 x 129.5 .20 5.0 C3LG6 6 60 120F4X2LG6 4.25 x 2.12 108.0 x 53.8 .20 5.0 C4LG6 6 60 120F4X3LG6 4.25 x 3.12 108.0 x 79.2 .20 5.0 C4LG6 6 60 120F4X4LG6 4.25 x 4.10 108.0 x 104.1 .20 5.0 C4LG6 6 60 120F4X5LG6 4.25 x 5.10 108.0 x 129.5 .20 5.0 C4LG6 6 60 120


12/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Round hole designretains and supports wireat variable heights toenhance wire management

Exclusive PANDUIT smooth rounded edgesprevents wiring abrasion


Base scoreline allows easy removalof sidewall section at t-junctions andright angles saving installation time

Flush cover designprovides a neat andfinished appearance


Features and Benefits P ANDUCT Flush Cover Type D Round Hole Wiring Duct

Available in sixteen sizes from 1" x 2" up to 4" x 4" in a variety of colors.

P ANDUCT Wire Retainersfor Type D Wiring DuctContain wiring when ductcover is opened. Wire retainersmount onto walls with pressuresensitive adhesive.See page C1.28.








C

M

I

P ANDUCT Flush Cover Type D Round Hole Wiring Duct Round hole design has multiple rows of holes to retain and support

wire at variable heights and positions Material: Lead-free PVC UL recognized continuous use temperature: 122F (50C) UL 94 flammability rating of V-0



.67 + .06 TYP[16.94 + 1.5]

-

- .44 + .02 [11.2 + 0.5]

-

-

For 2" duct height = 3 rows of holes3" duct height = 4 rows of holes

4" duct height = 6 rows of holes

H


W

H


BasePart Number

Duct Size (W x H)* CoverPart Number

Std.Pkg.Qty.

BaseCtn.Qty.

CoverCtn.Qty.In. mm

D1X2LG6 1.26 x 2.12 32.0 x 53.8 C1LG6 6 120 120D1X3LG6 1.26 x 3.12 32.0 x 79.2 C1LG6 6 120 120D1X4LG6 1.26 x 4.10 32.0 x 104.1 C1LG6 6 120 120D1.5X2LG6 1.75 x 2.12 44.5 x 53.8 C1.5LG6 6 120 120D1.5X3LG6 1.75 x 3.12 44.5 x 79.2 C1.5LG6 6 120 120D1.5X4LG6 1.75 x 4.10 44.5 x 104.1 C1.5LG6 6 60 120D2X2LG6 2.25 x 2.12 57.2 x 53.8 C2LG6 6 120 120D2X3LG6 2.25 x 3.12 57.2 x 79.2 C2LG6 6 60 120D2X4LG6 2.25 x 4.10 57.2 x 104.1 C2LG6 6 60 120

D2.5X3LG6 2.75 x 3.12 69.9 x 79.2 C2.5LG6 6 120 120D3X2LG6 3.25 x 2.12 82.6 x 53.8 C3LG6 6 120 120D3X3LG6 3.25 x 3.12 82.6 x 79.2 C3LG6 6 60 120D3X4LG6 3.25 x 4.10 82.6 x 104.1 C3LG6 6 60 120D4X2LG6 4.25 x 2.12 108.0 x 53.8 C4LG6 6 60 120D4X3LG6 4.25 x 3.12 108.0 x 79.2 C4LG6 6 60 120D4X4LG6 4.25 x 4.10 108.0 x 104.1 C4LG6 6 60 120


14/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview




DIN 43 659 metric mountinghole pattern meets EuropeanrequirementsUpper and lower scorelines allow

easy fingers and sidewall sectionremoval saving installation time

Narrow finger/slot designmatches the spacing ofhigh-density components

Flush cover designprovides a neatfinished appearance

Double restricted slot designretains wires, eliminating hassle and

saving time


Features and Benefits P ANDUCT Type MC Metric Narrow Slot Wiring Duct

Available in 22 sizes from 25mm x 25mm up to 100mm x 100mm in international gray and white colors.

P ANDUCT Wire Retainers forType MC Wiring DuctContain wiring when duct cover isopened. Wire retainers snap easilybetween duct fingers.See page C1.28.







C

M

I

P ANDUCT Type MC Metric Narrow Slot Wiring Duct CE compliant and metric sizing for control panels intended for

European applications Material: Lead-free PVC UL recognized continuous use temperature: 122F (50C) UL 94 flammability rating of V-0


Provided with DIN 43 659 mounting holes Duct and cover packaged together in 2m lengths

Available in IG (International Gray) and WH (White) colors.Base and cover sold together.*"H" dimension includes duct and cover.

.20 TYP [5.0]

.50 TYP [12.7]

Multiple slot restrictors present with62mm and greater duct wall height.

W

H

Base andCover PartNumber

Duct Size (W x H)* Slot WidthReplacement

CoverPart Number

Baseand

CoverPkg.Qty.(m)

ReplacementCoverStd.Pkg.Qty.mm In. In. mm

MC25X25IG2 24.6 x 23.6 .97 x .93 .20 5.0 C25IG2 20 20

MC25X37IG2 24.6 x 35.8 .97 x 1.41 .20 5.0 C25IG2 20 20

MC25X50IG2 24.6 x 47.8 .97 x 1.88 .20 5.0 C25IG2 20 20

MC25X62IG2 24.6 x 59.7 .97 x 2.35 .20 5.0 C25IG2 20 20

MC25X75IG2 24.6 x 72.4 .97 x 2.85 .20 5.0 C25IG2 20 20

MC37X37IG2 37.1 x 35.8 1.46 x 1.41 .20 5.0 C37IG2 20 20

MC37X50IG2 37.1 x 47.8 1.46 x 1.88 .20 5.0 C37IG2 20 20

MC37X62IG2 37.1 x 59.7 1.46 x 2.35 .20 5.0 C37IG2 20 20

MC37X75IG2 37.1 x 72.4 1.46 x 2.85 .20 5.0 C37IG2 20 20

MC50X50IG2 49.5 x 47.8 1.95 x 1.89 .20 5.0 C50IG2 20 20

MC50X75IG2 49.5 x 72.4 1.95 x 2.85 .20 5.0 C50IG2 10 20

MC50X100IG2 49.5 x 97.8 1.95 x 3.85 .20 5.0 C50IG2 10 20

MC62X37IG2 62.0 x 35.8 2.44 x 1.41 .20 5.0 C62IG2 20 20

MC62X62IG2 62.0 x 59.7 2.44 x 2.35 .20 5.0 C62IG2 20 20

MC75X50IG2 74.7 x 48.0 2.94 x 1.89 .20 5.0 C75IG2 20 20

MC75X62IG2 74.7 x 59.7 2.94 x 2.35 .20 5.0 C75IG2 20 20

MC75X75IG2 74.7 x 72.4 2.94 x 2.85 .20 5.0 C75IG2 10 20

MC75X100IG2 74.7 x 97.8 2.94 x 3.85 .20 5.0 C75IG2 10 20

MC100X50IG2 99.6 x 48.0 3.92 x 1.89 .20 5.0 C100IG2 10 20MC100X62IG2 99.6 x 59.7 3.92 x 2.35 .20 5.0 C100IG2 10 20

MC100X75IG2 99.6 x 72.4 3.92 x 2.85 .20 5.0 C100IG2 10 20

MC100X100IG2 99.6 x 97.8 3.92 x 3.85 .20 5.0 C100IG2 10 20


16/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Base scoreline allows easyremoval of sidewall sectionssaving installation time

Flush cover design

provides a neat andfinished appearance



P ANDUCT Wire Retainers forType FS Solid Wall RacewayContain wiring when duct coveris opened. Wire retainers mountsonto walls with pressuresensitive adhesive.See page C1.28.




Features and Benefits P ANDUCT Type FS Solid Wall Raceway


P ANDUCT Type C Coverwith Protective FilmReduces scrap and labor costsby protecting the surface duringstorage, handling, and installation.

See page C1.17.


17/52

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>>

>

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)


C

M

I

P ANDUCT Type FS Solid Wall Raceway Solid wall design fully encloses cables providing maximum

protection and aesthetics Material: Lead-free PVC

UL recognized continuous use temperature: 122F (50C) UL 94 flammability rating of V-0 Base and cover length is 6 feet

>Indicates parts available with mounting holes. Remove NM from part number.Part Number shown for LG (Light Gray). For other color availability see Color Selection Guide, page C1.48.Base and cover sold separately.*H dimension includes duct and cover.

W

H

To order cover with protective filmadd F to part number. 6'' covernot available with film.

BasePart Number

Duct Size (W x H)* CoverPart Number

Std.Pkg.Qty.

BaseCtn.Qty.

CoverCtn.Qty.In. mm

FS.5X.5LG6NM .69 x .60 17.5 x 15.2 C.5LG6 6 120 120FS.5X1LG6NM .69 x 1.06 17.5 x 26.9 C.5LG6 6 120 120FS.75X.75LG6NM .93 x .82 23.6 x 20.8 C.75LG6 6 120 120FS1X1LG6NM 1.26 x 1.12 32.0 x 28.4 C1LG6 6 120 120FS1X1.5LG6NM 1.26 x 1.62 32.0 x 41.1 C1LG6 6 120 120FS1X2LG6NM 1.26 x 2.12 32.0 x 53.8 C1LG6 6 120 120FS1X3LG6NM 1.26 x 3.12 32.0 x 79.2 C1LG6 6 120 120FS1X4LG6NM 1.26 x 4.10 32.0 x 104.1 C1LG6 6 60 120FS1.5X1LG6NM 1.75 x 1.12 44.5 x 28.4 C1.5LG6 6 120 120FS1.5X1.5LG6NM 1.75 x 1.62 44.5 x 41.1 C1.5LG6 6 120 120FS1.5X2LG6NM 1.75 x 2.12 44.5 x 53.8 C1.5LG6 6 120 120FS1.5X3LG6NM 1.75 x 3.12 44.5 x 79.2 C1.5LG6 6 120 120FS2X1LG6NM 2.25 x 1.12 57.2 x 28.4 C2LG6 6 120 120FS2X1.5LG6NM 2.25 x 1.62 57.2 x 41.1 C2LG6 6 120 120FS2X2LG6NM 2.25 x 2.12 57.2 x 53.8 C2LG6 6 120 120FS2X3LG6NM 2.25 x 3.12 57.2 x 79.2 C2LG6 6 60 120FS2X4LG6NM 2.25 x 4.10 57.2 x 104.1 C2LG6 6 60 120FS3X1LG6NM 3.25 x 1.12 82.6 x 28.4 C3LG6 6 120 120FS3X2LG6NM 3.25 x 2.12 82.6 x 53.8 C3LG6 6 120 120FS3X3LG6NM 3.25 x 3.12 82.6 x 79.2 C3LG6 6 60 120FS3X4LG6NM 3.25 x 4.10 82.6 x 104.1 C3LG6 6 60 120FS3X5LG6NM 3.25 x 5.10 82.6 x 129.5 C3LG6 6 60 120FS4X2LG6NM 4.25 x 2.12 108.0 x 53.8 C4LG6 6 60 120FS4X3LG6NM 4.25 x 3.12 108.0 x 79.2 C4LG6 6 60 120

FS4X4LG6NM 4.25 x 4.10 108.0 x 104.1 C4LG6 6 60 120FS4X5LG6NM 4.25 x 5.10 108.0 x 129.5 C4LG6 6 60 120FS6X4LG6NM 6.25 x 4.15 158.8 x 105.4 C6LG6 6 60 120


18/52


C1.18

B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Halogen-free material is nontoxic, lead-free, environmentally safe and willnot release toxic or corrosive gases that could endanger public safety ordamage sensitive electronic equipment

UL 94V-0

Halogen-free material is non-toxic, lead-free, environmentally safe andwill not release toxic or corrosive gases that could endanger public safetyor damage sensitive electronic equipment

UL 94V-1

Low smoke/low toxicity material emits a low level of toxic fumes and lowsmoke emissions when burned

Performs to global mass transit rail standards: U.S. Federal Rail Administration Guidelines and

NFPA 130 requirements French AFNOR NFF 16 101, 16 102 (I1, F1 classification

at 2.1mm thickness) German DIN 5510-2 (S4, SR2, ST2 classification) UNIFER Italian Railway Flammability standard EN UNI11925-2

UL 94V-0

The material isself-extinguishing andhas excellent flameretardancy UL 94V-0.

The material doesnot release densesmoke when burned perASTM E662 test method.

The material does notemit a high volume oftoxic gases when burnedper Boeing and Airbustest methods.

Wiring Duct for Special Environments

*NORYL is a registered trademark of General Electric Company.

Type NNC Halogen-Free Metric Wiring Duct

Type NE NORYL* Halogen-Free Wiring Duct

Type TMC Low Smoke/Low Toxicity Wiring Duct




C

M

I

Semiconductor Manufacturing

Ship Building

Nuclear Power Plants

Oil Platforms

The material contains no fluorine,bromide, or chlorine and will notemit any corrosive or toxic gaseswhen burned per IEC 60754-2test method.

Material is rated for a continuous usetemperature above 75C (167F).

Semiconductor Manufacturing

Ship Building

Nuclear Power Plants

Oil Platforms

Passenger Rail Cars; Rail Stations

Other Transportation Vehicles

pages C1.20 C1.21Environment/Material Specifications Typical Applications

page C1.24Environment/Material Specifications Typical Applications

pages C1.22 C1.23Environment/Material Specifications Typical Applications


20/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Upper and lower scorelines allows easy finger andsidewall section removal, saving installation time

Flush coverdesign providesa neat andfinished appearance

Non-slip coverliner preventscover slide

Halogen-free modified PPOmaterial is environmentallysafe and will not releasecorrosive or toxic gases

P ANDUCT Type NNC Halogen-FreeSolid Divider WallCreate separate wiring channelswithin the wiring duct base.See page C1.21.


Features and Benefits P ANDUCT Type NNC Halogen-Free Metric Wiring Duct

Available in fourteen sizes from 25mm x 25mm up to 100mm x 100mm in light gray and white.

Wide finger/slot design

provides greater rigidityand allows use with awide range of wire andbundle sizes

DIN 43 659 metricmounting holepattern meetsEuropean requirements





C

M

I

P ANDUCT Type NNC Halogen-Free Metric Wiring Duct Material: Halogen-free modified PPO material as verified with IEC

60754-2 test method (test on gases evolved during combustion ofelectric cables)

UL recognized continuous use temperature: 203F (95C) UL 94 flammability rating of V-0


Provided with DIN 43 659 mounting holes Metric sizing and finger progression Duct and cover packaged together in 2m lengths

Available in LG (Light Gray) and WH (White).Do not allow cutting, tapping, or cleaning fluids that contain hydrocarbons to come in contact with type NNC wiringduct as it will cause stress cracking. See page C1.47 for a list of chemicals to avoid.*H dimension includes duct and cover..39 TYP [10.0]

.98 TYP [25.0]


P ANDUCT Type NNC Divider Wall NNC solid divider wall can be mounted inside NNC and NE wiring

duct to create multiple channels Material: Halogen-free modified PPO

Simply install the divider wall base when mounting the duct andsnap the divider wall onto mounting base, DB-C

Available in WH (White) color only.Note: Must be used with mounting base, DB-C (see page C1.26) which is sold separately. Install mounting basesto the duct channel, locate within 2" of each divider wall end and at least 12" along the length.

Part NumberLength

(m)

For NominalDuct Height

(mm)

Std.Pkg.Qty.

Std.Ctn.Qty.(m)

NNC50DWH2 2 50 2 40NNC75DWH2 2 75 2 40

W

H

Base and CoverPart Number

Duct Size (W x H)* Slot WidthReplacement

CoverPart Number

Baseand

CoverCtn.Qty.(m)

ReplacementCoverCtn.Qty.(m)mm In. In. mm

NNC25X25LG2 24.6 x 23.6 .97 x .93 .39 10.0 NC25LG2 20 20NNC25X37LG2 24.6 x 35.8 .97 x 1.41 .39 10.0 NC25LG2 20 20NNC25X50LG2 24.6 x 47.8 .97 x 1.88 .39 10.0 NC25LG2 20 20NNC25X75LG2 24.6 x 72.4 .97 x 2.85 .39 10.0 NC25LG2 20 20NNC37X37LG2 37.1 x 35.8 1.46 x 1.41 .39 10.0 NC37LG2 20 20NNC37X50LG2 37.1 x 47.8 1.46 x 1.88 .39 10.0 NC37LG2 20 20NNC37X75LG2 37.1 x 72.4 1.46 x 2.85 .39 10.0 NC37LG2 20 20NNC50X50LG2 49.5 x 47.8 1.95 x 1.88 .39 10.0 NC50LG2 20 20NNC50X75LG2 49.5 x 72.4 1.95 x 2.85 .39 10.0 NC50LG2 10 20NNC50X100LG2 49.5 x 97.8 1.95 x 3.85 .39 10.0 NC50LG2 10 20NNC75X75LG2 74.7 x 72.4 2.94 x 2.85 .39 10.0 NC75LG2 10 20NNC100X50LG2 99.6 x 47.8 3.92 x 1.88 .39 10.0 NC100LG2 10 20NNC100X75LG2 99.6 x 72.4 3.92 x 2.85 .39 10.0 NC100LG2 10 20NNC100X100LG2 99.6 x 97.8 3.92 x 3.85 .39 10.0 NC100LG2 10 20


22/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Narrow finger/slot designclosely matches the spacing

of high-density components

Upper and lower scorelinesallows easy fingers and sidewallsection removal saving installation time

DIN 43 659 metricmounting holepattern meetsEuropeanrequirements

Double restricted slot

design retains wires,eliminating hassle andsaving time

Low smoke, lowtoxicity, and lowflammability materialmeets Federal RailAdministration guidelines

Features and Benefits P ANDUCT Type TMC Low Smoke/Low Toxicity Wiring Duct

Available in seven sizes from 25mm x 37mm up to 100mm x 75mm in Beige color.

P ANDUCT Wire Retainers for TypeTMC Wiring DuctContain wiring when duct cover isopened. Wire retainers snap easilybetween duct fingers.See page C1.28.


P ANDUCT Type TMC Low Smoke/ Low Toxicity Solid Divider WallCreate separate wiring channelswithin the wiring duct base.See page C1.23.


Non-slip coverliner preventscover slide




C

M

I

P ANDUCT Type TMC Low Smoke/Low Toxicity Wiring Duct

Material: low smoke, low toxicity, and low flammability thermoplastic UL recognized continuous use temperature: 176F (80C) UL 94 flammability rating of V-0 Conforms with NFPA 79-2007 section 13.3.1 requirement for flame

retardant material

Provided with DIN 43 659 mounting holes Metric sizing and finger progression Duct and cover packaged together in 2m lengths

Available in BR (Natural Beige) color only.*H dimension includes duct and cover.

.20 TYP [5.0]

.50 TYP [12.7]


Wiring duct divider wall can be mounted inside any type ofPANDUIT PVC wiring duct to create multiple channels

Simply install the divider wall base when mounting the duct andsnap the divider wall onto the mounting base

All versions snap onto DB-C mounting base

Divider wall heights 2 inches and greater have a scoreline featureallowing sections to be removed leaving a smooth edge

Meets UL 508/508A insulation material requirement for barrierbetween conductors

UL 94 flammability rating of V-0 Material: Lead-free PVC

P ANDUCT Type TMC Low Smoke/Low Toxicity Solid Divider Wall

Note: Must be used with mounting base, DB-C (see page C1.26) which is sold separately. Install mounting basesto the duct channel, locate within 2" of each divider wall end and at least every 12" along the length.

W

H

Part Number

For NominalDuct Height

(mm)Length

(m)

Std.Pkg.Qty.

Std.Ctn.Qty.

TMC50DW2 50 2 2 20TMC75DW2 75 2 2 20

Base and CoverPart Number

Duct Size W x H* Slot WidthReplacement

CoverPart Number

Baseand

CoverCtn.Qty.(m)

ReplacementCoverCtn.Qty.(m)In. mm In. mm

TMC25X37BR2 .97 x 1.41 24.6 x 35.8 .20 5.0 TC25BR2 20 20TMC37X37BR2 1.46 x 1.41 37.1 x 35.8 .20 5.0 TC37BR2 20 20TMC50X50BR2 1.95 x 1.89 49.5 x 48.0 .20 5.0 TC50BR2 20 20TMC75X50BR2 2.94 x 1.89 74.7 x 48.0 .20 5.0 TC75BR2 20 20TMC75X75BR2 2.94 x 2.88 74.7 x 73.2 .20 5.0 TC75BR2 10 20TMC100X50BR2 3.92 x 1.89 99.6 x 48.0 .20 5.0 TC100BR2 10 20TMC100X75BR2 3.92 x 2.88 99.6 x 73.2 .20 5.0 TC100BR2 10 20


24/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



P ANDUCT Type NE NORYL ** Halogen-Free Wiring Duct Material: Halogen-free NORYL** UL recognized continuous use temperature: 203F (95C) UL 94 flammability fating of V-1


Available in WH (White) only.Do not allow cutting, tapping, or cleaning fluids that contain hydrocarbons to come in contact with type NE wiringduct as it will cause stress cracking. See page C1.47 for list of chemicals to avoid.Base and cover sold separately.*H dimension includes duct and cover.**NORYL is a registered trademark of General Electric Company.

W

H

F

E

For .5" duct height: .37" [9.4] .80" [20.3] 1" to 2" duct height: .31" [7.9] .80" [20.3]

3" to 4" duct height: .31" [7.9] 1.00" [25.4] 5" duct height: .38" [9.4] 1.33" [33.8]

FE

BasePart Number

Duct Size W x H* Slot Width

CoverPart Number

Std.Pkg.Qty.

BaseCtn.Qty.


NE.5X.5WH6 .63 x .56 16.0 x 14.2 .38 9.7 NC.5WH6 6 120 120NE.5X1WH6 .63 x 1.06 16.0 x 26.9 .31 7.9 NC.5WH6 6 120 120NE1X1WH6 1.14 x 1.06 29.0 x 26.9 .31 7.9 NC1WH6 6 120 120NE1X1.5WH6 1.14 x 1.62 29.0 x 41.1 .31 7.9 NC1WH6 6 120 120NE1X2WH6 1.14 x 2.06 29.0 x 52.3 .31 7.9 NC1WH6 6 120 120NE1X3WH6 1.14 x 3.06 29.0 x 77.7 .31 7.9 NC1WH6 6 120 120NE1X4WH6 1.14 x 4.06 29.0 x 103.1 .31 7.9 NC1WH6 6 60 120NE1.5X1.5WH6 1.64 x 1.62 41.7 x 41.1 .31 7.9 NC1.5WH6 6 120 120

NE1.5X2WH6 1.64 x 2.06 41.7 x 52.3 .31 7.9 NC1.5WH6 6 120 120NE1.5X3WH6 1.64 x 3.06 41.7 x 77.7 .31 7.9 NC1.5WH6 6 120 120NE1.5X4WH6 1.64 x 4.06 41.7 x 103.1 .31 7.9 NC1.5WH6 6 60 120NE2X1WH6 2.14 x 1.06 54.4 x 26.9 .31 7.9 NC2WH6 6 120 120NE2X2WH6 2.14 x 2.06 54.4 x 52.3 .31 7.9 NC2WH6 6 120 120NE2X3WH6 2.14 x 3.06 54.4 x 77.7 .31 7.9 NC2WH6 6 60 120NE2X4WH6 2.14 x 4.06 54.4 x 103.1 .31 7.9 NC2WH6 6 60 120NE3X1WH6 3.14 x 1.06 79.8 x 26.9 .31 7.9 NC3WH6 6 120 120NE3X2WH6 3.14 x 2.06 79.8 x 52.3 .31 7.9 NC3WH6 6 120 120NE3X3WH6 3.14 x 3.06 79.8 x 77.7 .31 7.9 NC3WH6 6 60 120NE3X4WH6 3.14 x 4.06 79.8 x 103.1 .31 7.9 NC3WH6 6 60 120NE3X5WH6 3.14 x 5.06 79.8 x 128.5 .38 9.7 NC3WH6 6 60 120NE4X2WH6 4.14 x 2.06 105.2 x 52.3 .31 7.9 NC4WH6 6 60 120NE4X3WH6 4.14 x 3.06 105.2 x 77.7 .31 7.9 NC4WH6 6 60 120NE4X4WH6 4.14 x 4.06 105.2 x 103.1 .31 7.9 NC4WH6 6 60 120NE4X5WH6 4.14 x 5.06 105.2 x 128.5 .38 9.7 NC4WH6 6 60 120




C

M

I

WIRING DUCTTOOLS AND ACCESSORIESPANDUIT offers a selection ofP ANDUCT Tools and Accessories to aid cutting,modifying,and installingwiring duct.

Wide selection of hand tools for cutting and installingwiring duct

Snap-in wire retainers to retain cabling when the cover isremoved or during cable installation

Divider walls that mount within the duct enabling

multiple channels to be created within a duct channel Corner strips hold corners rigid at t-junctions in control

panel applications Joining strips to connect two sections of duct and hold the

walls rigid Mounting clips provide an alternative method to mount

the duct and allow the duct to be more easily removed

Some of the features and benefits found inP ANDUCT

Tools and Accessories include:


26/52


C1.26

P ANDUCT Type FL Flexible Wiring Duct Material: Flexible Polypropylene UL Recognized continuous use temperature: 149F (65C)

UL 94 flammability rating of V-2 Factory applied adhesive tape provided for easy mounting

Available in LG (RAL 7040 Light Gray) color only. Unit of measure is pieces.*H dimension includes duct and cover.

Part NumberDuct Size (W x H)* Length

Std.Pkg.Qty.In. mm In. mm

FL12X12LG-A .49 x .49 12.5 x 12.5 19.7 500 112FL25X25LG-A .98 x .98 25.0 x 25.0 19.7 500 70FL50X50LG-A 1.97 x 1.97 50.0 x 50.0 19.7 500 32

W

H

.25 TYP [6.2]

.20 TYP [5.0]

P ANDUCT

Divider Wall Wiring duct divider wall can be mounted inside any type of

PANDUIT PVC wiring duct to create multiple channels Simply install the divider wall base when mounting the duct and

snap the divider wall onto the mounting base All versions snap onto DB-C mounting base

Divider wall heights 2 inches and greater have a scoreline featureallowing sections to be removed leaving a smooth edge

Meets UL 508/508A insulation material requirement for barrierbetween conductors

UL 94 flammability rating of V-0 Material: Lead-free PVC


Part Number Used with Anchors

Std.Pkg.Qty.

Std.Ctn.Qty.

P ANDUCT Divider Wall Mounting BaseDB-C PANDUIT NR1 or #8 or #10 screw 100 1000

D*H6 and D*H2

SD*H6

DB-C

Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD .

B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Part NumberFor Nominal Duct Height Length

ColorStd.Pkg.Qty.

Std.Ctn.Qty.In. mm Ft. m

P ANDUCT Solid Divider WallD1H6 1.00 25 6 Light Gray 6 120D1.5H6 1.50 37 6 Light Gray 6 120D2H6 2.00 50 6 Light Gray 6 120D3H6 3.00 75 6 Light Gray 6 120D4H6 4.00 100 6 Light Gray 6 120D2HWH6 2.00 50 6 White 6 120D3HWH6 3.00 75 6 White 6 120D4HWH6 4.00 100 6 White 6 120

P ANDUCT Metric Solid Divider WallD50H2 2.00 50 2 International Gray 2 40D75H2 3.00 75 2 International Gray 2 40D100H2 4.00 100 2 International Gray 2 40

P ANDUCT Slotted Divider WallSD2H6 2.00 50 6 Light Gray 6 120SD3H6 3.00 75 6 Light Gray 6 120SD4H6 4.00 100 6 Light Gray 6 120SD2HWH6 2.00 50 6 White 6 120SD3HWH6 3.00 75 6 White 6 120SD4HWH6 4.00 100 6 White 6 120




C

M

I

P ANDUCT Type NNC Divider Wall NNC solid divider wall can be mounted inside NNC and NE wiring

duct to create multiple channels Material: Halogen-free modified PPO

Simply install the divider wall base when mounting the duct andsnap the divider wall onto mounting base, DB-C

Available in WH (White) color only.Note: Must be used with mounting base, DB-C (see page C1.26) which is sold separately. Install mounting basesto the duct channel, locate within 2" of each divider wall end and at least 12" along the length.

Part Number

For Nominal Duct HeightStd.Pkg.Qty.

Std.Ctn.Qty.In. mm

NNC50DWH2 2.00 50 2 40NNC75DWH2 3.00 75 2 40

Wiring duct divider wall can be mounted inside any type ofPANDUIT PVC wiring duct to create multiple channels

Simply install the divider wall base when mounting the duct andsnap the divider wall onto the mounting base

All versions snap onto DB-C mounting base

Divider wall heights 2 inches and greater have a scoreline feature

allowing sections to be removed leaving a smooth edge Meets UL508/508A insulation material requirement for barrier

between conductors UL 94 flammability rating of V-0 Material: Lead-free PVC

P ANDUCT Type TMC Low Smoke/Low Toxicity Solid Divider Wall


Part Number

For Nominal Duct HeightStd.Pkg.Qty.

Std.Ctn.Qty.In. mm

TMC50DW2 2 50 2 20TMC75DW2 3 75 2 20


28/52



P ANDUCT Type G and H Wiring Duct Wire Retainers Insert between fingers of type G and H to contain wiring when

cover is removed Adjustable height Material: ABS

*For 2" width type H hinged cover wiring duct use part number WR2H-C.

Part NumberFor Duct Width

In. (mm)For Duct Height

In. (mm)

Std.Pkg.Qty.

Std.Ctn.Qty.

WR2-C 2.00 (50.8) 2.00 4.00 (50.8 101.6) 100 1000WR2H-C 2.00(50.5) 2.00 4.00 (50.8 101.6) 100 1000WR3-C 3.00 (76.2) 2.00 4.00 (50.8 101.6) 100 1000WR4-C 4.00 (101.6) 2.00 4.00 (50.8 101.6) 100 1000WR5-C Use with: 3 x 5, 4 x 5 or 6 x 4 Use with: 3 x 5, 4 x 5 or 6 x 4 100 1000

P ANDUCT Solid Wall Raceway Type FS and Type D Wiring Duct Wire Retainer Mounts onto walls of type FS raceway or type D duct with pressure

sensitive adhesive One size fits three different duct widths

Full length is used with 2 inch wide duct; for small widths, break offsegments at scorelines

Material: Lead-free PVC

Full length is used with 2" wide duct. For smaller widths, break off segments at scorelines.

Part NumberFor Duct Width

In. (mm)

Std.Pkg.Qty.

Std.Ctn.Qty.

WRS-A-C10 1.00 (25.4)1.50 (38.1)2.00 (50.8)

100 1000

B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview




29/52


C

P ANDUCT Type F, HN, MC and TMC Duct Wire Retainers/Labeling Device Used to contain wiring when cover is removed and can also be

used as a labeling device FWR-C works with all type F and HN duct sizes

FMWR-C works with all type MC and TMC sizes Material: Lead-free PVC

Part Number Material For Duct Width

Std.

Pkg.Qty.

Std.

Ctn.Qty.In. mmFWR-C Rigid PVC 1.50 4.00 37.0 76.2 100 1000FMWR-C Rigid PVC 1.46 3.94 37 100 100 1000

Labeling Inside Duct Snaps onto duct fingers. Fulllength for use with 4" wideduct. For smaller widths, breakoff segments at scorelines.

Labeling Outside Duct

Break off the last segment from wire retainer below(1.5'' mark) and snap onto the back of the remainingsegment. Install label and mount between fingersfacing outward.

P ANDUCT Duct Corner Strips with 1 Inch Bend Radius Control Create a strong rigid corner at wiring duct junctions Provide bend radius protection for cabling as required in

NFPA 79-2007 section 13.1.5.9 and TIA/EIA-568-B and 569-A Available in five pre-cut sizes and 6-foot lengths that can be

cut-to-size to meet any size requirement

Easy to install two-piece design Compatible with all styles of PANDUIT wiring duct UL 94 flammability rating of V-0 Material: Lead-free PVC

CSPC available in Light Gray color only.Order number of feet required, in multiples of 6' or Standard Package Quantity for pieces offered in 6' lengths.

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)

M

I

Part Number Part Description

ForDuct Height

Color

Std.Pkg.Qty.

Std.Ctn.Qty.In. mm

6' Lengths for use with all Types of PVC Wiring DuctCSC1LG6

Cut-to-size 6' corner strip with a1" bend radius.

All sizes(Cut to

ductheight)

All sizes(Cut to

ductheight)

LightGray

6 120

CSC1WH6 White 6 120

Pre-Cut Pieces for use with all Types of PVC Wiring DuctCSPC1LG-Q 1" bend radius corner strip

pre-cut for 1" wall height.1.00 25.4 Light

Gray25 250

CSPC1.5LG-Q 1" bend radius corner strippre-cut for 1.5" wall height(2.0" type H duct).

1.50 38.1 LightGray

25 250

CSPC2LG-Q 1" bend radius corner strippre-cut for 2" wall height.

2.00 50.8 LightGray

25 250

CSPC3LG-Q 1" bend radius corner strippre-cut for 3" wall height.

3.00 76.2 LightGray

25 250

CSPC4LG-Q 1" bend radius corner strippre-cut for 4" wall height(4.0" type H duct).

4.00 101.6 LightGray

25 250


30/52



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



P ANDUCT Duct Corner Strips Slide onto duct at corner or t-junctions for smooth, round corners Available in five pre-cut sizes and 6-foot lengths that can be cut to

meet any size requirement Easy to install one-piece design

Compatible with all styles of PANDUIT wiring duct UL 94 flammability rating of V-0 Material: Lead-free PVC

*Available in LG (Light Gray) only.

CS1LG6

CSP*LG-Q

P ANDUCT Duct Joining Strips Slide onto duct to join sections together Available in 6-foot lengths that can be cut to meet any

size requirement Easy to install one-piece design

Compatible with all styles of PANDUIT wiring duct UL 94 flammability rating of V-0 Material: Lead-free PVC

To cut product to proper length subtract 1/2'' from the duct wall height (example: for G2X2LG6, cutDJS1**6 to 1 1/2'' length).

DJS1**6

Part Number Part DescriptionFor Nominal Duct Height

Color

Std.Pkg.Qty.

Std.Ctn.Qty.In. mm

6' Lengths for use with all Types of PVC Wiring DuctCS1LG6 6' length is cut by user to fit

duct height.Cut-to-size Cut-to-size Light

Gray6 120

CS1WH6 6' length is cut by user to fitduct height.

Cut-to-size Cut-to-size White 6 120

Pre-Cut Pieces for use with all Types of PVC Wiring Duct*CSP1LG-Q

Pre-cut pieces.

1.00 25.4

LightGray

25 250CSP1.5LG-Q 1.50 38.1 25 250CSP2LG-Q 2.00 50.8 25 250CSP3LG-Q 3.00 76.2 25 250CSP4LG-Q 4.00 101.6 25 250

Part Number Part DescriptionFor Duct Height

Color

Std.Pkg.Qty.

Std.Ctn.Qty.In. mm

6' Lengths for use with all Types of PVC Wiring DuctDJS1LG6 6' length is cut by user

to fit duct height.Cut-to-size Cut-to-size Light Gray 6 120

DJS1WH6 White




C

M

I

P ANDUCT Snap-Clip Mounting Brackets Duct easily snaps into bracket No mounting holes required in duct Ensures no metal is inside the duct

Snap-clip spacing is not critical Simplifies fabrication drawings and panel layout Material: Spring steel

Part Number Screw RequiredFor Duct Width

Std.Pkg.Qty.

Std.Ctn.Qty.In. mm

Snap-Clip Mounting Brackets for use with Types G, F, FS and D Wiring DuctS1F-C #8-32 x 1/4 (Provided) 1.00 25.4 100 1000S1.5F-C #8-32 x 1/4 (Provided) 1.50 38.1 100 1000S2F-C #8-32 x 1/4 (Provided) 2.00 50.8 100 1000S3F-C #8-32 x 1/4 (Provided) 3.00 76.2 100 1000S4F-C #8-32 x 1/4 (Provided) 4.00 101.6 100 1000

Snap-Clip Mounting Brackets for use with Types MC, NNC, and TMC Wiring DuctSNS25F-C #8-32 x 1/4 (User Supplied) 1.00 25 100 1000SNS37F-C #8-32 x 1/4 (User Supplied) 1.50 37 100 1000SNS50F-C #8-32 x 1/4 (User Supplied) 2.00 50 100 1000SNS62F-C #8-32 x 1/4 (User Supplied) 2.50 62 100 1000SNS75F-C #8-32 x 1/4 (User Supplied) 3.00 75 100 1000

P ANDUCT Snap-Clip Mounting Bracket Type NE Wiring Duct

Duct easily snaps into bracket Ensures no metal is inside the duct Snap-clip spacing is not critical

Simplifies fabrication drawings and panel layout Material: Spring steel

Part Number Screw RequiredFor Duct Width Std.Pkg.

Qty.Std.Ctn.Qty.In. mm

SNS.5-C #6-32 x 1/4 (User Supplied) .50 12.7 100 1000SNS.75-C #6-32 x 1/4 (User Supplied) .75 19.1 100 1000SNS1-C #8-32 x 1/4 (User Supplied) 1.00 25.4 100 1000SNS1.5-C #8-32 x 1/4 (User Supplied) 1.50 38.1 100 1000SNS2-C #8-32 x 1/4 (User Supplied) 2.00 50.8 100 1000SNS3-C #8-32 x 1/4 (User Supplied) 3.00 76.2 100 1000


32/52



Duct SizeW x H

TapePartNumber

RollLength Std.Pkg.

Qty.Std.Ctn.Qty.Yds. m

.5 x .5 thru 1.5 x 4 P32W2A2-50-7 7.0 6.4 1 100P32W2A2-50-72 72.0 65.5 1 9

2 x 1 thru 3 x 3 P32W2A2-50-7 7.0 6.4 1 100P32W2A2-50-72 72.0 65.5 1 9

3 x 4 thru 3 x 5 P32W2A2-75-7 7.0 6.4 1 60P32W2A2-75-72 72.0 65.5 1 7

4 x 1.5 thru 4 x 3 P32W2A2-50-7 7.0 6.4 1 100P32W2A2-75-72 72.0 65.5 1 9

4 x 4 thru 6 x 4 P32W2A2-75-7 7.0 6.4 1 60P32W2A2-75-72 72.0 65.5 1 7

Recommended installation temperature is 70F (21C) UL Recognized service temperature is 32F (0C) to 140F (60C)

Optimum recommended dwell time for acrylic adhesive is 8 hours Recommended tape load is 1/2 lb. per square inch of tape area

Adhesive Tape for Wiring Duct

Specifications for Factory Applied Tape

B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Duct SizeW x H

Rows ofTape

TapeWidth Thickness

In. mm In. mm.5 x .5 through 1.5 x 4 1 .50 12.7 .03 .8

2 x 1 through 3 x 3 2 .50 12.7 .03 .83 x 4 through 3 x 5 2 .75 19.1 .03 .8

4 x 1.5 through 4 x 3 2 .50 12.7 .03 .84 x 4 through 6 x 4 2 .75 19.1 .03 .8




C

G DuctLight Gray

G DuctWhite

G DuctBlack

F DuctLight Gray

NE DuctWhite

G.5X.5LG6-A G.5X.5WH6-A F.5X.5LG6-A

G.5X1LG6-A G.5X1WH6-A F.5X1LG6-A

G.75X.75LG6-A F.75X.75LG6-A

G.75X1LG6-A G.75X1WH6-A

G.75X1.5LG6-A G.75X1.5WH6-A F.75X1.5LG6-A

G.75X2LG6-A G.75X2WH6-A

G1X1LG6-A G1X1WH6-A F1X1LG6-A

G1X1.5LG6-A G1X1.5WH6-A F1X1.5LG6-A

G1X2LG6-A G1X2WH6-A F1X2LG6-A NE1X2WH6-A

G1X3LG6-A G1X3WH6-A G1X3BL6-A F1X3LG6-A


G1.5X1LG6-A G1.5X1WH6-A F1.5X1LG6-A

G1.5X1.5LG6-A G1.5X1.5WH-A F1.5X1.5LG6-A

G1.5X2LG6-A G1.5X2WH6-A F1.5X2LG6-A NE1.5X2WH6-A




G2X1.5LG6-A G2X1.5WH6-A F2X1.5LG6-A

G2X2LG6-A G2X2WH6-A G2X2BL6-A F2X2LG6-A NE2X2WH6-A




G2.5X3LG6-A G2.5X3WH6-A






G4X1.5LG6-A G4X1.5WH6-A



G4X4LG6-A G4X4WH6-A G4X4BL6-A F4X4LG6-A NE4X4WH6-AG4X5LG6-A G4X5WH6-A F4X5LG6-A

Selection of wiring duct part numbersavailable with factory applied adhesive tape.

Adhesive Tape Guide

All three sizes of flexible duct come provided with adhesive: FL12X12LG-A, FL25X25LG-A, FL50X50LG-A.

M

I


34/52

DFCT



B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



P ANDUCT Installation Tools

PBDCT and DCT easily cut P ANDUCT Wiring Duct and Cover DNT-100 notches duct sidewalls to bottom scoreline for tees and

corner junctions

TNR installs or removes PANDUIT Nylon Rivets, NR1-C andNR1-M, quickly and easily

DFCT easily removes duct fingers in tight places

Always use approved safety goggles when using any tools.

PBDCT

DCT

DNT-100 TNR

NR1

Total Thickness of Panel and Duct Panel Hole Dia.NeededANSI

StandardDrill BitIn. mm In. mm

.158 .187 4.0 4.7 .187 4.7 #15

.188 .218 4.8 5.5 .193 4.9 #11

.219 .250 5.6 6.4 .203 5.2 #7

.251 .281 6.5 7.1 .213 5.4 #4

Part Number Part Description

Std.

Pkg.Qty

Duct Cutting ToolPBDCT PANDUIT bench-mount duct cutting tool. Cuts slotted wiring ducts and

wiring duct covers with up to 6" width and up to 5" height. Full 78.74"(2m) measuring scale. Includes safety guarding.

1

DCT Hand-held duct cutting tool. 1

Replacement Blade Kit (Includes blade and nylon insert)DCT-BLD Replacement blade kit with blade and nylon insert. 1

Replacement Nylon InsertDCT-RI Replacement nylon insert. 5

Duct Finger Cutting Tool (For use with all wide slotted duct types)DFCT Hand-held duct finger cutting tool. 1

Duct Notching Tool (For use with all slotted duct types)DNT-100 Hand-held sidewall notching tool. 1

Nylon Rivet Installation ToolTNR Hand-held nylon rivet installation tool. 1

Nylon RivetsNR1-C Nylon rivet for use with TNR rivet tool.

Mean pull-off force: PVC 90 lbs., Noryl Duct (Type NE) 70 lbs.Mean shear force: PVC 139 lbs., Noryl Duct (Type NE) 126 lbs.

100

NR1-M Nylon rivet for use with TNR rivet tool.Mean pull-off force: PVC 90 lbs., Noryl Duct (Type NE) 70 lbs.Mean shear force: PVC 139 lbs., Noryl Duct (Type NE) 126 lbs.

1000




C

M

I

P ANDUCT P ANEL M AX Corner Wiring Duct Dimensions

D

.50 TYP[12.7]

.20 TYP[5.0]

View A A

T

Z

C

A

HG

W

A

A

2.00 [50.8]

2.00 TYP[50.8]

.50 TYP[12.7].20 TYP

[5.0]

K

Dimensions are shown for reference only. Contact PANDUIT customer service at 800-777-3300 for specific dimensional needs.

Size

Dimensions Inches (mm)

A C D G H K T W ZCWD3 4.98

(126.6)2.25

(57.2)2.83

(71.8)3.10

(79.1)3.57

(90.7)3.95

(100.4).10

(2.4)4.40

(111.8)5.16

(131.0)CWD4 5.94

(150.9)2.25

(57.2)3.84

(97.5)4.10

(104.1)4.58

(115.7)4.89

(124.3).11

(2.7)5.33

(135.3)6.54

(166.0)


36/52


C1.36

B2.Cable

ccessories

C1.WiringDuct


C4.Cable

anagement

D1.erminals

D2.Poweronnectors

E1.LabelingSystems

E2.Labels

E3.


F.Index


C2.SurfaceRaceway

E5.ockout/


B1.able Ties

A.System

Overview



Duct Size(W x H)

Dimensions Inches (mm)A B C D E F H K T

.5 x .5 .69 .60 .69 .38 .37 .80 .50 .05(12.7) (12.7) (17.5) (15.2) (17.5) (9.5) (9.3) (20.3) (12.7) (1.3)

.5 x 1 .69 1.06 .69 .75 .31 .80 1.00 .05(12.7) (25.4) (17.5) (26.9) (17.5) (19.1) (7.9) (20.3) (25.4) (1.3)

.5 x 2 .69 2.03 .69 1.63 .31 .80 2.00 .08(12.7) (50.8) (17.5) (51.6) (17.5) (41.3) (7.9) (20.3) (50.8) (2.0)

.5 x 4 .69 4.10 .69 2.25 .31 1.00 4.00 .10(12.7) (101.6) (17.5) (104.1) (17.5) (57.2) (7.9) (25.4) (101.6) (2.4)

.75 x .75 .93 .82 .94 .56 .31 .80 0.75 .06(19.1) (19.1) (23.6) (20.8) (23.9) (14.3) (7.9) (20.3) (19.1) (1.4)

.75 x 1 .93 1.06 .94 .75 .31 .80 1.00 .06(19.1) (25.4) (23.6) 26.9 (23.9) (19.1) (7.9) (20.3) (25.4) (1.4)

.75 x 1.5 .93 1.57 .94 1.20 .31 .80 1.50 .07(19.1) (38.1) (23.6) (39.9) (23.9) (30.5) (7.9) (20.3) (38.1) (1.8)

.75 x 2 .93 2.03 .94 1.63 .31 .80 2.00 .08(19.1) (50.8) (23.6) (51.6) (23.9) (41.3) (7.9) (20.3) (50.8) (2.0)

1 x 1 1.26 1.12 1.25 .75 .31 .80 1.00 .06(25.4) (25.4) (32.0) (28.4) (31.8) (19.1) (7.9) (20.3) (25.4) (1.4)

1 x 1.5 1.26 1.62 1.25 1.20 .31 .80 1.50 .07(25.4) (38.1) (32.0) (41.1) (31.8) (30.5) (7.9) (20.3) (38.1) (1.8)

1 x 2 1.26 2.12 1.25 1.63 .31 .80 2.00 .08

(25.4) (50.8) (32.0) (53.8) (31.8) (41.3) (7.9) (20.3) (50.8) (2.0)1 x 3 1.26 3.12 1.25 2.63 .31 1.00 3.00 .10(25.4) (76.2) (32.0) (79.2) (31.8) (66.7) (7.9) (25.4) (76.2) (2.4)

1 x 4 1.26 4.10 1.25 3.63 .31 1.00 4.00 .11(25.4) (101.6) (32.0) (104.1) (31.8) (92.1) (7.9) (25.4) (101.6) (2.7)

1.5 x 1 1.75 1.12 1.75 .75 .31 .80 1.00 .06(38.1) (25.4) (44.5) (28.4) (44.5) (19.1) (7.9) (20.3) (25.4) (1.5)

1.5 x 1.5 1.75 1.62 1.75 1.20 .31 .80 1.50 .07(38.1) (38.1) (44.5) (41.1) (44.5) (30.5) (7.9) (20.3) (38.1) (1.8)

1.5 x 2 1.75 2.12 1.75 1.63 .31 .80 2.00 .08(38.1) (50.8) (44.5) (53.8) (44.5) (41.3) (7.9) (20.3) (50.8) (2.0)

1.5 x 3 1.75 3.12 1.75 2.63 .31 1.00 3.00 .10(38.1) (76.2) (44.5) (79.2) (44.5) (66.7) (7.9) (25.4) (76.2) (2.4)

1.5 x 4 1.75 4.10 1.75 3.63 .31 1.00 4.00 .11(38.1) (101.6) (44.5) (104.1) (44.5) (92.1) (7.9) (25.4) (101.6) (2.7)

2 x 1 2.25 1.12 2.25 .75 .31 .80 1.00 .50 .06(50.8) (25.4) (57.2) (28.4) (57.2) (19.1) (7.9) (20.3) (25.4) (12.7) (1.5)

2 x 1.5 2.25 1.62 2.25 1.20 .31 .80 1.50 .50 .07

(50.8) (38.1) (57.2) (41.1) (57.2) (30.5) (7.9) (20.3) (38.1) (12.7) (1.8)2 x 2 2.25 2.12 2.25 1.63 .31 .80 2.00 .50 .08

(50.8) (50.8) (57.2) (53.8) (57.2) (41.3) (7.9) (20.3) (50.8) (12.7) (2.0)2 x 3 2.25 3.12 2.25 2.63 .31 1.00 3.00 .50 .10

(50.8) (76.2) (57.2) (79.2) (57.2) (66.7) (7.9) (25.4) (76.2) (12.7) (2.4)2 x 4 2.25 4.10 2.25 3.63 .31 1.00 4.00 .50 .11

(50.8) (101.6) (57.2) (104.1) (57.2) (92.1) (7.9) (25.4) (101.6) (12.7) (2.7)2 x 5 2.25 5.10 2.25 4.63 .38 1.33 5.00 .50 .12

(50.8) (127.0) (57.2) (129.5) (57.2) (117.5) (9.5) (33.9) (127.0) (12.7) (2.9)2.5 x 3 2.75 3.12 2.75 2.63 .31 1.00 3.00 .73 .10

(63.5) (76.2) (69.9) (79.2) (69.9) (66.7) (7.9) (25.4) (76.2) (18.4) (2.5)3 x 1 3.25 1.12 3.25 .75 .31 .80 1.00 1.00 .07

(76.2) (25.4) (82.6) (28.4) (82.6) (19.1) (7.9) (20.3) (25.4) (25.4) (1.8)3 x 2 3.25 2.12 3.25 1.63 .31 .80 2.00 1.00 .08

(76.2) (50.8) (82.6) (53.8) (82.6) (41.3) (7.9) (20.3) (50.8) (25.4) (2.0)3 x 3 3.25 3.12 3.25 2.63 .31 1.00 3.00 1.00 .10

(76.2) (76.2) (82.6) (79.2) (82.6) (66.7) (7.9) (25.4) (76.2) (25.4) (2.4)3 x 4 3.25 4.10 3.25 3.63 .31 1.00 4.00 1.00 .11

(76.2) (101.6) (82.6) (104.1) (82.6) (92.1) (7.9) (25.4) (101.6) (25.4) (2.7)3 x 5 3.25 5.10 3.25 4.63 .38 1.33 5.00 1.00 .12

(76.2) (127.0) (82.6) (129.5) (82.6) (117.5) (9.5) (33.9) (127.0) (25.4) (2.9)4 x 1.5 4.25 1.62 4.25 1.20 .31 .80 1.50 1.50 .07

(101.6) (38.1) (108.0) (41.1) (108.0) (30.5) (7.9) (20.3) (38.1) (38.1) (1.8)4 x 2 4.25 2.12 4.25 1.63 .31 0.80 2.00 1.50 .08

(101.6) (50.8) (108.0) (53.8) (108.0) (41.3) (7.9) (20.3) (50.8) (38.1) (2.0)4 x 3 4.25 3.12 4.25 2.63 .31 1.00 3.00 1.50 .10

(101.6) (76.2) (108.0) (79.2) (108.0) (66.7) (7.9) (25.4) (76.2) (38.1) (2.5)4 x 4 4.25 4.10 4.25 3.63 .31 1.00 4.00 1.50 .11

(101.6) (101.6) (108.0) (104.1) (108.0) (92.1) (7.9) (25.4) (101.6) (38.1) (2.7)4 x 5 4.25 5.10 4.25 4.63 .38 1.33 5.00 1.50 .12

(101.6) (127.0) (108.0) (129.5) (108.0) (117.5) (9.5) (33.9) (127.0) (38.1) (2.9)6 x 4 6.25 4.15 6.25 3.63 .31 1.00 4.00 2.50 .11

(152.4) (101.6) (158.8) (105.4) (158.8) (92.1) (7.9) (25.4) (101.6) (63.5) (2.8)

.67 + .06 TYP[16.94 + 1.5]

--

.44 + .02[11.2 + 0.5]

--

H

P ANDUCT Type G and D Wiring Duct Dimensions

O N C E N T E R L I N E

Dimensions are shown for reference only. Contact PANDUIT customer service at 800-777-3300 for specific dimensional needs.

Note: A dimension is measured at base.Note: K dimension shown in mounting holedimensions below.

For 2" duct height = 3 rows of holes3" duct height = 4 rows of holes4" duct height = 6 rows of holes

>Available for type G wiring duct only.See page C1.9 and C1.13 for wiring duct color and size availability.

For .5" high duct.

For .75", 1", 1.5", 2", 3", 4" and 5" high duct.

DT

A

B H

E

C

T

A

B H

E

C

F

D

F

Mounting Hole DimensionsFor .5", .75", 1", and 1.5" wide duct.

For 2.0", 2.5", 3", 4" and 6" wide duct.

.50 TYP[12.7]

.20 TYP[5.0]

4.0 [101.6] TYP

4.0 [101.6] TYP

2.0[50.8]

2.0[50.8]

KCL

CL

K

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>




C

M

I

P ANDUCT Type F Wiring Duct and FS Raceway DimensionsDimensions are shown for reference only. Contact PANDUIT customer service at 800-777-3300 for specific dimensional needs.

Note: A dimension is measured at base.Note: K dimension shown in mountinghole dimensions below.

Note: For type FS raceway, no mountingholes is the standard condition; if mountingholes are required, delete NM from thepart number.

>Available for type FS raceway only.See page C1.48 for wiring duct color and size availability.

For .5", .75", 1" and 1.5" high duct.

For 2", 3", 4" and 5" high duct.

D

T

A

B H

EC

T

A

B H

EC

F

D

F

Mounting Hole DimensionsFor .5", .75", 1" and 1.5" wide duct.

For 2.0", 2.5", 3", 4" and 6" wide duct.

.50 TYP[12.7]

.20 TYP[5.0]

2.0[50.8]

2.0 TYP[50.8]

2.0[50.8]

2.0 TYP[50.8]

KCL

CL

K >

>

Duct Size(W x H)

Dimensions Inches (mm)A B C D E F H K T

.5 x .5 .69 .60 .69 .38 .20 .50 .50 .05(12.7) (12.7) (17.5) (15.2) (17.5) (9.5) (5.0) (12.7) (12.7) (1.3)

.5 x 1 .69 1.06 .69 .75 .20 .50 1.00 .05

(12.7) (25.4) (17.5) (26.9) (17.5) (19.1) (5.0) (12.7) (25.4) (1.3).75 x .75 .93 .82 .94 .56 .20 .50 .75 .06(19.1) (19.1) (23.6) (20.8) (23.9) (14.3) (5.0) (12.7) (19.1) (1.4)

.75 x 1.5 .93 1.57 .94 1.20 .20 .50 1.50 .07(19.1) (38.1) (23.6) (39.9) (23.9) (30.5) (5.0) (12.7) (38.1) (1.8)

1 x 1 1.26 1.12 1.25 .75 .20 .50 1.00 .06(25.4) (25.4) (32.0) (28.4) (31.8) (19.1) (5.0) (12.7) (25.4) (1.4)

1 x 1.5 1.26 1.62 1.25 1.20 .20 .50 1.50 .07(25.4) (38.1) (32.0) (41.1) (31.8) (30.5) (5.0) (12.7) (38.1) (1.8)

1 x 2 1.26 2.12 1.25 1.63 .20 .50 2.00 .08(25.4) (50.8) (32.0) (53.8) (31.8) (41.3) (5.0) (12.7) (50.8) (2.0)

1 x 3 1.26 3.12 1.25 2.63 .20 .50 3.00 .10(25.4) (76.2) (32.0) (79.2) (31.8) (66.7) (5.0) (12.7) (76.2) (2.4)

1 x 4 1.26 4.10 1.25 3.63 .20 .50 4.00 .11(25.4) (101.6) (32.0) (104.1) (31.8) (92.1) (5.0) (12.7) (101.6) (2.7)

1.5 x 1 1.75 1.12 1.75 .75 .20 .50 1.00 .06(38.1) (25.4) (44.5) (28.4) (44.5) (19.1) (5.0) (12.7) (25.4) (1.5)

1.5 x 1.5 1.75 1.62 1.75 1.20 .20 .50 1.50 .07

(38.1) (38.1) (44.5) (41.1) (44.5) (30.5) (5.0) (12.7) (38.1) (1.8)1.5 x 2 1.75 2.12 1.75 1.63 .20 .50 2.00 .08

(38.1) (50.8) (44.5) (53.8) (44.5) (41.3) (5.0) (12.7) (50.8) (2.0)1.5 x 3 1.75 3.12 1.75 2.63 .20 .50 3.00 .10

(38.1) (76.2) (44.5) (79.2) (44.5) (66.7) (5.0) (12.7) (76.2) (2.4)1.5 x 4 1.75 4.10 1.75 3.63 .20 .50 4.00 .11

(38.1) (101.6) (44.5) (104.1) (44.5) (92.1) (5.0) (12.7) (101.6) (2.7)2 x 1 2.25 1.12 2.25 .75 .20 .50 1.00 .50 .06

(50.8) (25.4) (57.2) (28.4) (57.2) (19.1) (5.0) (12.7) (25.4) (12.7) (1.5)2 x 1.5 2.25 1.62 2.25 1.20 .20 .50 1.50 .50 .07

(50.8) (38.1) (57.2) (41.1) (57.2) (30.5) (5.0) (12.7) (38.1) (12.7) (1.8)2 x 2 2.25 2.12 2.25 1.63 .20 .50 2.00 .50 .08

(50.8) (50.8) (57.2) (53.8) (57.2) (41.3) (5.0) (12.7) (50.8) (12.7) (2.0)2 x 3 2.25 3.12 2.25 2.63 .20 .50 3.00 .50 .10

(50.8) (76.2) (57.2) (79.2) (57.2) (66.7) (5.0) (12.7) (76.2) (12.7) (2.4)2 x 4 2.25 4.10 2.25 3.63 .20 .50 4.00 .50 .11

(50.8) (101.6) (57.2) (104.1) (57.2) (92.1) (5.0) (12.7) (101.6) (12.7) (2.7)2 x 5 2.25 5.10 2.25 4.63 .20 .50 5.00 .50 .12

(50.8) (127.0) (57.2) (129.5) (57.2) (117.5) (5.0) (12.7) (127.0) (12.7) (2.9)3 x 1 3.25 1.12 3.25 .75 .20 .50 1.00 1.00 .07

(76.2) (25.4) (82.6) (28.4) (82.6) (19.1) (5.0) (12.7) (25.4) (25.4) (1.7)3 x 2 3.25 2.12 3.25 1.63 .20 .50 2.00 1.00 .08

(76.2) (50.8) (82.6) (53.8) (82.6) (41.3) (5.0) (12.7) (50.8) (25.4) (2.0)3 x 3 3.25 3.12 3.25 2.63 .20 .50 3.00 1.00 .10

(76.2) (76.2) (82.6) (79.2) (82.6) (66.7) (5.0) (12.7) (76.2) (25.4) (2.4)3 x 4 3.25 4.10 3.25 3.63 .20 50 4.00 1.00 .11

(76.2) (101.6) (82.6) (104.1) (82.6) (92.1) (5.0) (12.7) (101.6) (25.4) (2.7)3 x 5 3.25 5.10 3.25 4.63 .20 .50 5.00 1.00 .12

(76.2) (127.0) (82.6) (129.5) (82.6) (117.5) (5.0) (12.7) (127.0) (25.4) (2.9)4 x 1.5 4.25 1.62 4.25 N/A N/A N/A 1.50 N/A .07(101.6) (38.1) (108.0) (41.1) (108.0) (38.1) (1.8)4 x 2 4.25 2.12 4.25 1.63 .20 .50 2.00 1.50 .08

(101.6) (50.8) (108.0) (53.8) (108.0) (41.3) (5.0) (12.7) (50.8) (38.1) (2.0)4 x 3 4.25 3.12 4.25 2.63 .20 .50 3.00 1.50 .10

(101.6) (76.2) (108.0) (79.2) (108.0) (66.7) (5.0) (12.7) (76.2) (38.1) (2.4)4 x 4 4.25 4.10 4.25 3.63 .20 .50 4.00 1.50 .11

(101.6) (101.6) (108.0) (104.1) (108.0) (92.1) (5.0) (12.7) (101.6) (38.1) (2.7)4 x 5 4.25 5.10 4.25 4.63 .20 .50 5.00 1.50 .12

(101.6) (127.0) (108.0) (129.5) (108.0) (117.5) (5.0) (12.7) (127.0) (38.1) (2.9)6 x 4 6.25 4.15 6.25 N/A N/A N/A 4.00 N/A .11(152.4) (101.6) (158.8) (105.4) (158.8) (101.6) (2.8)

O N C E N T E R L I N E


38/52




C

M

I

P ANDUCT Type NNC Wiring Duct DimensionsDimensions are shown for reference only. Contact PANDUIT customer service at 800-777-3300 for specific dimensional needs.

For 25mm, 37.5mm, and 50mm high duct.

For 75mm and 100mm high duct.

D

T

A

B H

C

T

A

B H

C

10.0 TYP

[.39]

25.0 TYP[.98]

10.0 TYP[.39]

25.0 TYP[.98]

D

Mounting Hole DimensionsFor 25mm, 37.5mm, and 50mm width duct.

For 75mm and 100mm width duct.

2000 mm[78.74]

1950 mm[76.77]

1950 mm[76.77]

14 mm[0.55]

50 mm[1.97]

50 mm[1.97]

25 mm[.98] 12.5 mm

[.49]6.5 mm

[.26]

4.5 mm[.18]

25 mm[.98]

8 mm[0.32]

2000 mm[78.74]

Duct Size(W x H)

Dimensions mm (Inches)A B C D H T

25 x 25 24.6 23.6 24.6 13.6 20.3 1.5(.98) x (.98) (.97) (.93) (.97) (.54) (.80) (.06)

25 x 37 24.6 35.8 24.6 24.6 33.0 1.8(.98) x (1.48) (.97) (1.41) (.97) (.97) (1.30) (.07)

25 x 50 24.6 47.8 24.6 34.8 45.5 2.0(.98) x (1.97) (.97) (1.88) (.97) (1.37) (1.79) (.08)

25 x 75 24.6 72.4 24.6 57.6 70.6 2.0

(.98) x (2.95) (.97) (2.85) (.97) (2.27) (2.78) (.08)37.5 x 37.5 37.1 35.8 37.1 24.7 33.0 1.8

(1.48) x (1.48) (1.46) (1.41) (1.46) (.97) (1.30) (.07)37.5 x 50 37.1 47.8 37.1 34.8 45.5 2.0

(1.48) x (1.97) (1.46) (1.88) (1.46) (1.37) (1.79) (.08)37.5 x 75 37.1 72.4 37.1 57.6 70.6 2.0

(1.48) x (2.95) (1.46) (2.85) (1.46) (2.27) (2.78) (.08)50 x 50

Date post:	03-Jun-2018
Category:	Documents
Upload:	yamir-florez
View:	223 times
Download:	0 times

Sa-elcb10 Full Line 08 - Canaletas Panduit

Documents