1
Introduction: SABIT BITUMEN 40-50 is a Penetration Grade Asphalt Cement for use in the construction and maintenance of flexible pavements. SABIT BITUMEN 40-50 has high flash point and has high adhesion properties to aggregates, compatible with all types of aggregate. Instruction For Application: Used in hot asphalt mixes manufactured by central plants. General practices as outlined by Asphalt Institute Publication should be followed in mixing. Coverage: Depends on the mix design. Health & Safety: - Workers should wear protective masks, gloves, and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline Precaution: Care should be taken when heating SABIT BITUMEN 40-50 to avoid over heating. Packing & Storage: SABIT BITUMEN 40-50 can be supplied in bulk and drums. Store in suitable tanks supplied with heating systems, should never be stored at more than 150 o C. TECHNICAL DATA SABIT BITUMEN 40 - 50 (PENETRATION GRADE ASPHALT CEMENT COMPLIES WITH ASTM D 946, AASHTO M 20) o C o C o C
