Slide 1
Replace with a photograph
SACEA Fatal Risk Std’s UpdateNorthern Regional Meeting
Paul RedelinghuysUG Maintenance Manager (Khutala Colliery)7 May 2011
• Background• Task Team• Scope of Fatal Risk Standard (FRS)• Fatal Risk Standards (FRS) Perception• Brief Overview of these Fatal Risk Standards
– Light Vehicles– Heavy Duty Vehicles– Livery
• Way Forward• Closure
Slide 2
Topics
• SACMA & SACEA Initiative to address industry requirement on the Fatal Risk Standards (FRS).
• Alignment of Fatal Risk Standards (FRS) attempts within Colliery Industry,
• Industry Confusion with regards to contractors compliance requirements,
• Education of key stakeholders about FRS requirements,
• Best Practice Guideline for all Collieries where Fatal Risk Standards have not been adopted.
Slide 3
Background
• BECSA Paul Redelinghuys• XSTRATA Buks Loock• Anglo American Mike Thuesen
Slide 4
Task Team
• Light Vehicles (LV’s)– A Light Vehicle is a vehicle that has a gross vehicle weight that does not exceed 4500kg
and is/can be registered for use on a public road.
• Heavy Vehicles (HDV’s)– A Heavy Delivery Vehicle (HDV) is a vehicle that has a gross vehicle weight that exceeds
4500kg and is/can be registered for use on a public road.
• Busses– A Heavy Delivery Vehicle (HDV) is a vehicle that has a gross vehicle weight that exceeds
4500kg and is/can be registered for use on a public road.
• Livery– The Identification Signage which will be required on mobile equipment.
Slide 5
Scope of FRS
Slide 6
Fatal Risk Standards Perception
Buildmax FRCP Presentation
• Vehicle Classification– Class A – Vehicles with access to the mines.– Class B – Vehicles with access to operational areas.– Class C – Interaction with EME/SME’s.
• FRS Requirements i.e.:– Seatbelt,– Roll Over Protection Structures,
Slide 7
Brief Overview: LV’s
• FRS Requirements i.e.:– Positive Communication,– Airbag Requirements,– Buggy Whip,– Flashing Lights,– Seat mounting Requirements,– First Aid Kit Requirements,– Chock Blocks,– Fire Suppression Requirements, – Guarding Requirements,– Tire Type Requirements,– Advances in Technology
• IVMS systems for tracking purpose,• Collision Avoidance Requirements
– etc.
Slide 8
Brief Overview: LV’s
• Vehicle Classification– Class A – Vehicles with access to the mines.– Class B – Vehicles with access to operational areas.– Class C – Interaction with EME/SME’s.
Slide 9
Brief Overview: HDV’s
• FRS Requirements i.e.:– Lockout Requirements,– Adequate Walkways,
• 3 – Point Contact
– Chock Blocks,– Rear Under run protection,– ROPS,– Truck mounted Crane requirements,– Advances in Technology:
• IVMS systems for tracking purpose,• Collision Avoidance Requirements
– etc.
Slide 10
Brief Overview: HDV’s
Slide 11
Brief Overview: Livery
Slide 12
Brief Overview: Livery
• Draft Alignment FRS developed for:– Light Vehicles (LV’s),– Heavy Vehicles (HDV’s),– Busses, &– Livery.
• Alignment Session planned 24 May 2011 with following participants:– BECSA Paul Redelinghuys– XSTRATA Buks Loock– Anglo American Mike Thuesen– EXXARO Lou Kilian/Louis Turvey– SASOL Louis Botha
• Reach Agreement for Final Draft by End July 2011• Communication of Final FRS Guideline once agreement reached
Slide 13
Way Forward
Slide 14
Thank you