Safemade™
Prosthetic and Orthotic Products
Catalog 2007
———————————————————————————————————————————————————–—Address:Haltonintie 5, 47400 Kausala Tel: +358-40-525 9341 email: [email protected] Finland Fax: +358-5-5353 710 www.leinoimportexport.com Page nr: 1
LEINO LEINO IMPORT & EXPORT KY.
Modular System
A wide selection of Titanium, Aluminium, Stainless Steel, Carbon Fibre and Plastic Products.
Product range includes all components needed for a lower extremity amputee. Adjustments are easy and rapid to use for an excellent fit to every individual patient. Selected orthotic products are also availabe.
High Quality at Low Cost All products are throughly tested to ensure that they exceed the requirements of ISO 10328 standards. They incorporate the latest innovations, applied through intensive research and development.
Commitment to Quality We are committed to bring you products of the highest quality. If at any time you are not completely satisfied with any of our products, please let us to know for further improvements.
Products may be omitted, added, changed or re-designed without prior notice.
Different patient groups, including children are covered by the product assortment.
LEINO LEINO IMPORT & EXPORT KY.
Page nr: 2
New Products
C500UT Shifting Adapter, a handy tool for fitting work C500TT Shifting Device, outer threadings – outer threadings connections C500PT Shifting Device, pyramide - outer threadings connections C500U Shifting Device, inner threadings - inner threadings connections (Details on Page 13)
C500UT C500TT C500PT
Products can be turned 180 degrees to change direction of the upper and lower connections.
C500U
Page nr: 3
Page nr: Modular components BK-System Chart ................................................ AK-System Chart ................................................ Ankle Adapters ................................................... Pyramid Adapters ............................................... 4-Hole Adapters .................................................. Socket Adapters System Chart .......................... Socket Adapters .................................................. Double Adapters - Shifting Devices .................. Pylon Tube Adapters .......................................... Pylon Tubes ......................................................... Lock Sets for Silicone Liners, Product Chart ......... Lock Sets for Silicone Liners, System Chart 1 ....... Lock Sets for Silicone Liners, System Chart 2 ....... Lock Sets C150AK ................................................................ C200AK ................................................................ C500AK ................................................................ C500TK ................................................................ C510AK ................................................................ C550AK ................................................................ Accessories ............................................................ Knee Joints, Product Chart ...................................... AR200 .................................................................. AR210 .................................................................. AS211 ................................................................... AR220 ................................................................... AS221 ................................................................... AR222 .................................................................. AS222 ................................................................... AR410 ................................................................... AR430 ................................................................... Product Kits ............................................................... Silicone Liners, SelectionChart ................................ Silicone Liners .................................................... Feet .............................................................................
Prosthetic Products
Orthotic Products
KAFO Kit ................................................................... AFO Kit ...................................................................
5 6 7 8 9 10 11-12 13 14 15 30 31 32 33 34 35 36 37 38 39 50 51 52 53 54 55 56 57 58 59 70 80 81-86 90-92
100 101
Page nr: 4
BK-Installation, System Chart
AR137 AS137 AL137
AR134 AS134 AL134
AR133 AS133 AL133
AR131 AS131 AL131
AR132 AS132 AL132
AR130 AS130 AL130 AP213
AS213 AL213
C500PT
AP500 AS500 AL500
AP210 AS210 AL210
PP258 PP256 PS258 PS256 PA258 PA256 PP250 PP252
AR110 AR110B AR110C
AR120 AS120 AL120
AR112 AS112
20mm Offset Adjustable Offset 0-10mm
AP258 AP256 AP250 AP252
AP350 AS350 AL350
AP310, AP311 AS310, AS311 AL310, AL311
AP312 AS312 AL312
BK-Systems in which Socket is w/ the Silicone Liner & Lock Set, see the Lock Set System Charts (Catalog Pages 17-18)
Lock Set
AP110 AS110
AP112
AR111 AS111
With Offset in Weight Bearing Line
Straight Weight BearingLine
AR132 AS132 AL132
AR130 AS130 AL130
WP111 WP110
With Offset in Weight Bearing line
Adjustable Offset 0-10mm
C500U
AR130 AS130 AL130
AR132 AS132 AL132
AR130 AS130 AL130
AP320 AS320 AL320
AP330 AS330 AL330
AP340 AS340 AL340
Page nr: 5
AK-Installation, System Chart
AR137 AS137 AL137
AR134 AS134 AL134
AR133 AS133 AL133
AR131 AS131 AL131
AR132 AS132 AL132
AR130 AS130 AL130
AP213 AS213 AL213
C500PT
AP500 AS500 AL500
AP210 AS210 AL210
PP256 PS256 PA256 PP250
AR110 AR110B AR110C
AR120 AS120 AL120
AR112 AS112
20mm Offset Adjustable Offset 0-10mm
AP256 AP250
AP350 AS350 AL350
AK-Systems in which Socket is w/ the Silicone Liner & Lock Set, see the Lock Set System Charts (Pages 17-18)
Lock Set
AR111 AS111
With Offset in Weight Bearing Line
Straight Weight Bearing Line
AR132 AS132 AL132
AR130 AS130 AL130
WP111 WP110
With Offset in Weight Bearing line
Adjustable Offset 0-10mm
C500U
AR130 AS130 AL130
AR132 AS132 AL132
AR130 AS130 AL130
AP320 AS320 AL320
AP330 AS330 AL330
AP340 AS340 AL340
AR200 AR220 AS221 AR222 AS222 AR410
AR430
Knee X-Articulation Especially Long Stump Normal or Short
C500TT
AR131 AS131 AL131
Knee w/ 4-hole Connector at the Top
Page nr: 6
AP312, AS312, AL312
Product Code
Material Bolt Ø Weight
Patient’s max.
weight AP310 Titanium 10mm 81g 100kg AL310 Aluminium 10mm 84g 80kg AS310 Steel 10mm 146g 100kg AP311 Titanium 8mm 76g 80kg AL311 Aluminium 8mm 78g 80kg AS311 Steel 8mm 140g 80kg
AP310C Children Titanium 6mm 36g 40kg
Product Code
Material Bolt Ø Weight
Patient’s max.
weight AP312 Titanium 10mm 111g 100kg AS312 Steel 10mm 155g 100kg AL312 Aluminium 10mm 82g 80kg
Product Code for Products
CP310 AP310, AL310, AS310, AP311, AL311, AS311
Product Code Material Type Weight Description
310BT Titanium M10x60mm 24g Allen Head Bolt 310BS Steel M10x60mm 42g -do- 311BT Titanium M8x60mm 19g -do- 311BS Steel M8x60mm 24g -do- 310CB Titanium M6x50mm 8g -do- 310WS Steel M10 Serrated Lock Washer 310WF Steel M10 Flat Washer 311WS Steel M8 Serrated Lock Washer 311WF Steel M8 Flat Washer
310CWS Steel M6 Serrated Lock Washer 310CWF Steel M6 Flat Washer
Accessories
Connection Plates
Sach Ankle Adapters
AP310C for Children
AP310, AS310, AL310, AP311, AS311, AL311
With 312 product foot
can be connected directly to pylon tube
without separate ankle
adapter.
Combined Ankle - Tube Adapters
Page nr: 7
Product Code Material for Products Weight Patient’s
max. weight
AR132 Titanium AR110, AR112, AR120,AR131 42g 100kg
AL132 Aluminium AR110,AR112, AL120,AL131 24g 80kg
AS132 Steel AR110,AS112, AS120,AS131 42g 100kg
Product Code Material for Products Weight
Patient’s max.
weight
C200PA Steel C200AK,C500AK 68g 100kg
C200TP Titanium 44g 100kg
Product Code Material for Products Weight Patient’s
max. weight
AP500 Titanium AP256,AP258,PP256,PP258 88g 100kg
AL500 Aluminium -do- 68g 80kg
AS500 Steel -do- 144g 100kg
Pyramid Adapters with Rotation
Pyramid Receivers with Rotation
Pyramid Adapters for Lock sets
Product Code Material for Products Weight
Patient’s max.
weight
AR130 Titanium AR110, AR112, AR120,AR131 48g 100kg
AL130 Aluminium AR110,AR112, AL120,AL131 32g 80kg
AS130 Steel AR110,AS112, AS120,AS131 70g 100kg
Combined Pyramid Adapters - Tube Adapters
These products can be connected into any other products with threadings (4-Hole Adapters [AR131], Socket Adapters [AR112], Shifting Devices [C500U], Lock Sets [C510AK] etc.)
C200PA C200TP
Page nr: 8
Product Code Material for Products Weight
Patient’s max.
weight
AR131 Titanium AR130,AR132,C500PT, C500TT 56g 100kg
AL131 Aluminium AL130,AL132,C500PT, C500TT 34g 80kg
AS131 Steel AS130,AS132, C500PT,C500TT 96g 100kg
Product Code Material Weight Patient’s
max. weight AR133 Titanium 58g 100kg AL133 Aluminium 60g 80kg AS133 Steel 90g 100kg
Product Code Material Weight Patient’s
max. weight
AR134 Titanium 58g 100kg
AL134 Aluminium 60g 80kg
AS134 Steel 90g 100kg
Product Code Material Type Weight
Patient’s max.
weight AR135 Titanium Pyramid 90g 100kg AS135 Steel Pyramid 150g 100kg AR136 Titanium Pyramid Receiver 90g 100kg AS136 Steel Pyramid Receiver 150g 100kg
Product Code Material Weight Patient’s
max. weight AR137 Titanium 87g 100kg AL137 Aluminium 92g 80kg AS137 Steel 168g 100kg
4-Hole Adapters with Rotation
4-Hole Pyramid Adapters, no Rotation
4-Hole Pyramid Receivers, no Rotation
4-Hole Universal Adapters with Lateral Shift and Rotation (adjustable shift 0-9mm to any direction)
Combined 4-Hole Adapters - Tube Adapters
Connect with Pyramid [132] or Pyramid Receiver [130] for 4-Hole connection with rotation. Connection with Shifting Devices C500PT, C500TT provides rotation and lateral shift.
Page nr: 9
Socket Adapters/Attachment Plates, Option Sheet
Straight Weight Bearing Line With Offset in Weight Bearing Line
w/ Rotation w/o Rotation w/ Rotation
w/ Adjustable Offset 0-10mm to any direction
Offset 20mm to any direction
AP112
AP110 AS110
AR111AS111
AR112 AS112
AR110C, AR110B, AR110 WP110 WP111
AR133 AS133 AL133
AR134 AS134 AL134
AR137 AS137 AL137
AR130 AS130 AL130
AR132 AS132 AL132
AP213 AS213 AL213
AR131 AS131 AL131
AR120 AS120 AL120
AR135 AS135
AR136 AS136
AR130 AS130 AL130
AR131 AS131 AL131
AR131 AS131 AL131
C500PT C500TT C500U
AR130 AS130 AL130
AR132 AS132 AL132
AP213 AS213 AL213
Page nr: 10
Product Code Material for
Products Weight Patient’s max. weight
AR112 Titanium
AR130 AR132
C500PT C500TT
56g 100kg
AS112 Steel
AS130 AS132
C500PT C500TT
140g 100kg
AR110 (Ø100mm) Aluminium
AR130 AR132 AR120 AR131
C500PT C500TT
100g 100kg
AR110B (Ø90mm) Aluminium -do- 100g 100kg
AR110C (Ø80mm) Aluminium -do- 100g 100kg
Product Code Material Weight Patient’s
max. weight
AR111 Titanium 104g 100kg AS111 Steel 180g 100kg
Product Code Material for Products Weight
Patient’s max.
weight
AR120 Titanium AR110,AR110B, AR110C, AR130, AR132 74g 100kg
AL120 Aluminium -do- 50g 80kg AS120 Steel -do- 132g 100kg
Socket Pyramid Adapters, no Rotation
Socket Adapters with Rotation
AR112, AS112
Socket Adapters with Lateral Shift and Rotation
AR111, AS111
Connect with Pyramid [132] or Pyramid Receiver [130] for rotation. Connect with Shifting Devices [C500PT, C500TT] for lateral shift and rotation.
Connected with AR110, AR110B; AR110C provides 20mm lateral shift with rotation.
AR110
AR110B
AR110C
Page nr: 11
ProductCode Material Weight Patient’s
max. weight
AP110 Titanium 63g 100kg
AS110 Steel 108g 100kg
AL110 Aluminium 50g 80kg
AP110C for
Children Titanium 20g 40kg
Product Code Material Screws for
Products Weight Patient’s max. weight
AP112 Titanium 4kpl M5x25mm
AP110, AS110, AL110
33g 100kg
AP112C lapsille Titanium 4kpl
M5x20mm AP110C 25g 40kg
Product Code Diameter Weight Patient’s
max. weight WP110 120mm 33g 100kg WP111 87mm 25g 100kg
Product Code Description for Products
LC001 Lamination Dummy AP110,AS110,AL110 LC002 -do- AR111,AS111 LC003 -do- AR132,AS132,AL132 110S1 M4x16mm Locking Screw AR110,AR110B, AR110C
131S1 M6x14mm Countersunk Head Screw
AR131,AS131, WP110,WP111
131S2 M6x20mm Countersunk Head Screw -do-
131S3 M6x25mm Countersunk Head Screw -do-
Wooden Socket Adapters
WP110 Socket Adapters with Pyramid
AP110, AS110, AL110 AP110C for Children
Discs for Socket Adapters with Pyramid
AP112C for Children
Accessories
WP111
AP112
LC001 LC002 LC003
Page nr: 12
Product Code Material Length Weight Patient’s
max. weight AP320 Titanium 32mm 88g 100kg AS320 Steel 32mm 136g 100kg AL320 Aluminium 32mm 64g 80kg AP330 Titanium 46mm 104g 100kg AS330 Steel 46mm 166g 100kg AL330 Aluminium 46mm 76g 80kg AP340 Titanium 58mm 112g 100kg AS340 Steel 58mm 178g 100kg AL340 Aluminium 58mm 86g 80kg
Double Adapters
AP320, AS320, AL320
AP340, AS340, AL340
Shifting Devices with Rotation and Hole for Lock Set Pin (adjustment 0-10mm)
Product Code Material Connections Weight Patient’s
max. weight
C500TT Titanium Outer threadings at both ends 140g 100kg
C500PT Titanium Pyramid and outer threadings 140g 100kg
C500U Titanium Inner threadings at both ends 140g 100kg
Double Adapters with Rotation and adjustable length (adjustment 80 - 100mm, 1mm/rev.)
Product Code Material Connections Weight Patient’s
max. weight
C500UT Titanium Inner threadings´at both ends 140g 100kg
C500PT
C500TT
AP330, AS330, AL330
If connected with Pyramids [132], Pyramid Receivers[130] or Tube Adapters [213] this product is a handy, variable length tool for patient fitting work.
C500U
C500UT
Page nr: 13
Product Code Material Weight Patient’s
max. weight AP210 Titanium 83g 100kg AS210 Steel 135g 100kg AL210 Aluminium 65g 80kg
Pylon Tube Adapters
Pylon Tube Adapters, Tilted (10º )
Product Code Material Weight Patient’s
max. weight AP220 Titanium 92g 100kg AS220 Steel 135g 100kg AL220 Aluminium 65g 80kg
Pylon Tube Adapters with threading connection Product
Code Material Weight Patient’s max. weight
AP213 Titanium 75g 100kg
Pylon Tube Adapters with Pyramid
See Page 8 (Pyramid Adapters) for details
Pylon Tube Adapters for Children
Product Code Material Weight Patient’s
max. weight AP210C Titanium 50g 40kg
Page nr: 14
Pylon Tubes with Adapter Product
Code Tube
Length Tube material Adapter material Weight Patient’s
max. weight PP258 450mm Aluminium Titanium 288g 100kg PP256 225mm -”- Titanium 176g 100kg PP252 450mm Carbon Fibre Titanium 150g 100kg PP250 225mm Carbon Fibre Titanium 105g 100kg PS258 450mm Aluminium Steel 348g 100kg PS256 225mm Aluminium Steel 236g 100kg PA258 450mm Aluminium Aluminium 264g 80kg PA256 225mm Aluminium Aluminium 166g 80kg
Single Material Pylon Tubes with Adapter Product
Code Length Material Weight Patient’s max. weight
AP350 100mm Titanium 106g 100kg AS350 100mm Steel 192g 100kg AL350 100mm Aluminium 88g 80kg
Colors: Gold, Aluminium Tubes Dark Grey, Carbon Fibre Tubes
Pylon Tubes without Adapter Product
Code Length Material Weight Patient’s max. weight
AP258 450mm Aluminium 228g 100kg AP256 225mm Aluminium 116g 100kg AP252 450mm Carbon Fibre 90g 100kg AP250 225mm Carbon Fibre 45g 100kg
Product Code Length Material Weight Patient’s
max. weight AP256C 225mm Aluminium 62g 40kg
Carbon Fibre Tubes must always be installed with tube insert Product Code AL253
PylonTubes for Children
AL253
AP350,AS350, AL350
AP258 AP256 AP252 AP250
AP256C Page nr: 15
Lock Sets, Product Chart Product
Code Connection to
the Socket Description Patient’s max. weight
C150AK Laminated to the Socket Ratchet Type, Children’s model , Plastic Body 80kg
C200AK Laminated to the Socket
Ratchet Type, Plastic Body, Connection down using C200PA, C200TP, C200MA 100kg
C500AK Laminated to the Socket
Clutch Lock Type (stepless), Plastic Body, Connection down using C200PA, C200TP, C200MA 100kg
C500TK Laminated to the Socket Clutch Lock Type, Titanium Body with Pyramid 100kg
C510AK Separate from the Socket
Modular Clutch Lock Type, Alu Body, Threadings at both ends, Connection to the Socket using AR112, AS112,
Connection down using any product with outer threadings. 100kg
C550AK Separate from the Socket
Modular Clutch Lock Type, especially slim Alu Body, Connection to the Socket using Lamination Disc (incl. into the
Set), Connection down using 4-Hole Adapter 100kg
C150AK for Children C200AK Kit
C500AK Kit C500TK Kit
C510AK Kit C550AK Kit
Page nr: 30
Lock Sets System Chart - Lock Set Integral Part of the Socket
C500U
AP210 AS210 AL210
PP258 PP256 PS258 PS256 PA258 PA256 PP250 PP252
Straight Weight Bearing Line
Adjustable Offset 0-10mm
AR130 AS130 AL130
AR132 AS132 AL132
C500TK
C200PA
C500AK C200AK C150AK
Children’s model Shuttle Lock (Ratchet)
Shuttle Lock (Ratchet)
Clutch Lock Clutch Lock
C200MA
AR137 AS137 AL137
AR133 AS133 AL133
Straight Weight Bearing Line
AR134 AS134 AL134
AP500 AS500 AL500
AP213 AS213 AL213
With Offset in Weight Bearing Line
Page nr: 31
Lock Sets System Chart - Lock Set Outside the Socket
C510AK
AR137 AS137 AL137
AR134 AS134 AL134
AR133 AS133 AL133
C550AK
AR131 AS131 AL131
AR132 AS132 AL132
AR130 AS130 AL130
AP213 AS213 AL213
C500PT
AP210 AS210 AL210
C500PT AP213 AS213 AL213
AR132 AS132 AL132
AR130 AS130 AL130
AP500 AS500 AL500
PP258 PP256 PS258 PS256 PA258 PA256 PP250 PP252
AR110 AR110B AR110C
AR120 AS120 AL120
AR112 AS112
Straight Weight Bearing Line
20mm Offset
Adjustable Offset 0-10mm
Adjustable Offset 0-10mm
With Offset in Weight Bearing Line
With Offset in Weight Bearing Line
Page nr: 32
C150AK Lock Set for Children, Ratchet Type
Product Code Description Quantity
C150B Body, Plastic 1
C150PB Push Button 1
C150S Spring 1
C150C Catch 1
C200W T-Wrench 1
C150PP Pin 1
C150SN Sleeve Nut 1
C150ST Sleeve Tube 1
C150SS Set Screw for Sleeve Tube 1
C150LS Lamination Sleeve 1
C150T Lamination Tooling 1
C150B1 Bolt for Lamination Tooling 1
C500N Nails for Lamination Tooling 4
C500GL Glue 1
C150PB C150SN C150C C150S
C500GL C200W
C150ST
C150SS
C150B
C150PP
C150T
C150B1
C150LS C500N
C500CP
C500CP, Conversion Adapter for Pin (1/4” - 10mm), order separately
C150B2
Page nr: 33
C200AK Lock Set, Ratchet Type
Product Code Description Quantity
C200B Body, Plastic 1
C200PB Push Button 1
C200S Spring 1
C200C Catch 1
C200W T-Wrench 1
C200PP Pin 1
C200SN Sleeve Nut 1
C200ST Sleeve Tube 1
C200SS Set Screw for Sleeve Tube 1
C200LS Lamination Sleeve 1
C200T Lamination Tooling 1
C500B1 Bolt for Lamination Tooling 1
C500B2 Bolt for Lamination Tooling 1
C500N Nails for Lamination Tooling 4
C500GL Glue 1
C200PB C200SN C200C C200S
C500GL C200W
C200ST
C200SS
C200B
C200PP
C200T
C500B2
C200LS C500N
C500B1
C500CP
Connection down using C200PA, C200TP, C200MA
C500CP, Conversion Adapter for Pin (1/4” - 10mm), order separately
Page nr: 34
C500AK Lock Set, Clutch Lock Type (stepless) Product
Code Description Quantity
C500B Body, Plastic 1
C500PB Push Button 1 C500S Spring 1 C500C Cartridge 1
C500CB Clutch Bearing 1 C500G Gear 1 C500PP Pin 1 C500W T-Wrench 1 C500SS Set Screw 1 C500LS Lamination Sleeve 1 C500T Lamination Tooling 1 C500B1 Bolt for Lamination Tooling 1 C500B2 Bolt for Lamination Tooling 1 C500N Nails for LaminationTooling 4
C500GL Glue 1
C500PB C500S C500C C500C
C500B
C500CP Order separately
C500GL C500N C500T
C500B2 C500B1
C500LS C500W
C500PP
C500CP, Conversion Adapter for Pin (1/4” - 10mm), order separately
Connection down using C200PA, C200TP, C200MA
Page nr: 35
C500TK Titanium Set, Clutch Lock Type (stepless) Product
Code
Description Quantity
C500TB Body, Titanium 1 C500PB Push Button 1 C500S Spring 1 C500C Cartridge 1
C500CB Clutch Bearing 1 C500G Gear 1 C500PP Pin 1 C500W T-Wrench 1 C500SS Set Screw 1 C500LS Lamination Sleeve 1 C500T Lamination Tooling 1 C500B1 Bolt for Lamination Tooling 1 C500N Nails for Lamination Tooling 4
C500GL Glue 1
C500PB C500S C500C C500G
C500TB
C500GL C500N C500T
C500B1
C500LS C500W
C500PP
C500CP Order separately
C500CP, Conversion Adapter for Pin (1/4” - 10mm), order separately
Page nr: 36
Modular C510AK Set, Clutch Lock Type, Alu Body separate from the Socket, Connections with threadings
Product Code
Description Quantity
C510B Body, Aluminium 1
C500PB Push Button 1
C500S Spring 1
C500C Cartridge 1
C500CB Clutch Bearing 1
C500G Gear 1
C500PP Pin 1
C500W T-Wrench 1
C500LS Lamination Sleeve 1
C500GL Glue 1
Connection to the Socket using AR112, AS112 Connection down using any product with outside threadings
C500PB C500S C500C C500G
C500CP Order separately
C500GL C500N C500W C500LS
C500PP
C510B
C500CP, Conversion Adapter for Pin (1/4” - 10mm), order separately
Page nr: 37
Modular C550AK Set, Clutch Lock Type, especially slim alu body, separate from the Socket
Product Code
Description Quantity
C550B Body, Aluminium 1 C500PB Push Button 1 C500S Spring 1
C500BS Button Sleeve 1 C500CB Clutch Bearing 1 C550G Gear 1 C500PP Pin 1 C500W T-Wrench 1 C550AB Guide Disc 1 C550LR Lamination Ring 1 C500TS Lamination Screw 1 C550T Lamination Tooling 1 C550S1 Screws for Lamination Ring 4 C550S2 Screws for Lamination Ring 4 C550S3 Screws for Lamination Ring 4 C500N Nails for Lamination Tooling 4
C500GL Glue 1
Connection to the Socket with Lamination Disc (included) Connection down by using 4-hole Adapter (order separately)
C500PB C500S C550G
C550B
C500PP
C500W
C500GL C500N C500T C500TS
C500BS
C550AB C550S2 C550S3
C550LR C550S1
C500CP, Conversion Adapter for Pin (1/4” - 10mm), order separately
Page nr: 38
Accessories Product
Code Description Quantity
C150CR Lock Kit, C150AK 1
C200CR Lock Kit, C200AK 1
C500CR Cartridge Kit, C500AK,C500TK, C510AK 1
C550PP Short Pin, C550AK(L=40mm; 1,575”) 1
C500PP Pin, C500AK, C500TK, C510AK, C550AK 1
C150PP Pin, C150AK 1
C200PP Pin, C200AK 1
C500W T-Wrench, C500AK, C500TK, C510AK, C550AK 1
C200W T-Wrench, C150AK, C200AK 1
C550LR Lamination Disc, C550AK 1
C200MA Alu Disc for connecting C200AK, C500AK to 4-Hole Adapter 1
C500GL Glue 1
C500CP Conversion Adapter for Pins (1/4” - 10mm threading) 1
Other accessories, ask separately
C500CP
C500GL
C500CR
C150CR, C200CR
C500W C200W
C550PP
C500PP
C200PP
C150PP
C200MA
Page nr: 39
Knee Joints, Products Chart
Product Code Description Weight gr Patient’s
max. weight
AR200 Sinle Axis Knee Joint with Stance Control and Constant Friction, Titanium 320 100kg
AR210 Single Axis Knee Joint with Manual Lock, Titanium (Presently not available, new model coming soon)
AR220 Modular, polycentric 4-Bar Linkage, Titanium 500 100kg
AR222 Modular, polycentric 4-Bar Linkage, Titanium 480 100kg
AS221 Modular, polycentric 4-Bar Linkage, Titanium 615 100kg
AS222 Modular, polycentric 4-Bar Linkage, Titanium 575 100kg
AR410 Modular, polycentric 4-Bar Linkage, Titanium 650 100kg
AR430 Modular, polycentric 4-Bar Linkage, Titanium 625 100kg
AR200
AR220 AS221
AR222 AS222
AR410 AR430
Page nr: 50
AR200 Modular Single Axis Knee Joint with Stance Control and Constant Friction, Titanium
Product Code Description AR200 Knee Joint Complete
AR200/01 Upper Joint Section with Pyramid AR200/02 Lower Joint section with Pyramid AR200/03 Swing block AR200/04 Knee Axis AR200/05 Swing Axis AR200/06 Pressure Block AR200/07 Set Screw AR200/08 Plastic Block AR200/09 Compression Spring AR200/10 Plastic Guide Pin AR200/11 Stance Control Adjustment Screw AR200/12 Extension Stop AR200/13 Bumper AR200/14 Screw for Extension Stop AR200/15 Brake Bushing AR200/16 Bushing Safety Device AR200/17 Axis Screw AR200/18 Washer AR200/19 Clamp AR200/20 Screw for Clamp AR200/21 Extension Assist Rubber String AR200/22 Screw for Extension Assist AR200/23 Washer AR200/24 Bumper AR200/25 Locking Ring
AR200 Weight: 320gr
AR200 Modular Knee joint is a single axis knee with a stance phase friction brake, activated by patient’s weight bearing. AR200 is especially suitable for above-knee amputees who require a high degree of stability. The break function increases the knee stability and compensates also for weak musculature.
Page nr: 51
AR210 Modular Single Axis Knee Joint with Manual Lock, Titanium
AR210 Modular Knee Joint is a single axis knee with a manual lock. AR210 is especially suitable for geriatric above knee amputees.
Currently not available, new model coming soon.
Page nr: 52
AS211 Modular Single Axis Knee Joint with Manual Lock, Steel
Page nr: 53
AR220 Modular, polycentric 4-Axis Knee Joint, Titanium Upper Connection w/Pyramid, Lower Connection w/ Tube Adapter
Product Code Description AR220 Knee Joint Complete
AR220/01 Upper Joint Section with Pyramid AR220/02 Lower Joint Section w/ Tube Adapter AR220/03 Plastic Knee Cap AR220/04 Screw for Knee Cap AR220/05 Bumper AR220/06 Posterior Linkage Bar AR220/07 Anterior Linkage Bar AR220/08 Locking Screw AR220/09 Washer AR220/10 Spring for Extension Assist AR220/11 Guide for Extension Assist Spring AR220/12 Adjustment Screw for Extension Assist AR220/13 Tube for Extension Assist AR220/14 Locking Screw AR220/15 Lower Posterior Axis AR220/16 Bearing AR220/17 Adjustment Screw for Friction AR220/18 Friction Bushing AR220/19 Washer AR220/20 Locking Screw AR220/21 Upper and Lower Anterior Axis AR220/22 Upper Posterior Axis AR220/23 Washer AR220/24 Bearing AR220/25 Locking plate for Friction Bushing
AR220 Weight: 500gr
AR220 is a polycentric knee joint (4-bar linkage). The kinematics of the design provide excellent stability. AR220 is especially recommended for above knee and hip disarticulation amputees with a body weight up to 100kg/220lbs and a moderate functional ambulation level. Due to the reasonable wide range of adjustable stability, AR220 knee joint is also acceptable for inactive patients.
Page nr: 54
AS221 Modular, polycentric, 4-Axis Knee Joint, Steel Upper connection w/ Pyramid, Lower Connection w/ Tube Adapter
AS221 Weight: 615gr
AS221 is a polycentric knee joint (4-bar linkage). The kinematics of the design provide excellent stability. AS221 is especially recommended for above knee and hip disarticulation amputees with a body weight up to 100kg/220lbs and a moderate functional ambulation level. Due to the reasonable wide range of adjustable stability, AS221 knee joint is also acceptable for inactive patients.
Product Code Description AS221 Knee Joint Complete
AS221/01 Upper Joint Section with Pyramid AS221/02 Lower Joint Section w/ Tube Adapter AR220/03 Plastic Knee Cap AR220/04 Screw for Knee Cap AR220/05 Bumper AR220/06 Posterior Linkage Bar AS221/07 Anterior Linkage Bar AR220/08 Locking Screw AR220/09 Washer AR220/10 Spring for Extension Assist AR220/11 Guide for Extension Assist Spring AR220/12 Adjustment Screw for Extension Assist AR220/13 Tube for Extension Assist AR220/14 Locking Screw AR220/15 Lower Posterior Axis AR220/16 Bearing AR220/17 Adjustment Screw for Friction AR220/18 Friction Bushing AR220/19 Washer AR220/20 Locking Screw AR220/21 Upper and Lower Anterior Axis AR220/22 Upper Posterior Axis AR220/23 Washer AR220/24 Bearing AR220/25 Locking plate for Friction Bushing
Page nr: 55
AR222 Modular, polycentric, 4-Axis Knee Joint, Titanium Both Connections with Pyramid
AR222 Weight: 480gr
AR222 is a polycentric knee joint (4-bar linkage). The kinematics of the design provide excellent stability. AR222 is especially recommended for above knee and hip disarticulation amputees with a body weight up to 100kg/220lbs and a moderate functional ambulation level. Due to the reasonable wide range of adjustable stability, AR222 knee joint is also acceptable for inactive patients.
Product Code Description AR222 Knee Joint Complete
AR220/01 Upper Joint Section with Pyramid AR222/02 Lower Joint Section with Pyramid AR220/03 Plastic Knee Cap AR220/04 Screw for Knee Cap AR220/05 Bumper AR220/06 Posterior Linkage Bar AR220/07 Anterior Linkage Bar AR220/08 Locking Screw AR220/09 Washer AR222/10 Spring for Extension Assist AR222/11 Guide for Extension Assist Spring AR222/12 Adjustment Screw for Extension Assist AR222/13 Tube for Extension Assist AR220/14 Locking Screw AR220/15 Lower Posterior Axis AR220/16 Bearing AR220/17 Adjustment Screw for Friction AR220/18 Friction Bushing AR220/19 Washer AR220/20 Locking Screw AR220/21 Upper and Lower Anterior Axis AR220/22 Upper Posterior Axis AR220/23 Washer AR220/24 Bearing AR220/25 Locking plate for Friction Bushing
Page nr: 56
AS222 Modular, polycentric, 4-Axis Knee Joint, Steel Both Connections with Pyramid
AS222 Weight: 575gr
AS222 is a polycentric knee joint (4-bar linkage). The kinematics of the design provide excellent stability. AS222 is especially recommended for above knee and hip disarticulation amputees with a body weight up to 100kg/220lbs and a moderate functional ambulation level. Due to the reasonable wide range of adjustable stability, AS222 knee joint is also acceptable for inactive patients.
Product Code Description AS222 Knee Joint Complete
AS222/01 Upper Joint Section with Pyramid AS222/02 Lower Joint Section with Pyramid AR220/03 Plastic Knee Cap AR220/04 Screw for Knee Cap AR220/05 Bumper AR220/06 Posterior Linkage Bar AS221/07 Anterior Linkage Bar AR220/08 Locking Screw AR220/09 Washer AR222/10 Spring for Extension Assist AR222/11 Guide for Extension Assist Spring AR222/12 Adjustment Screw for Extension Assist AR222/13 Tube for Extension Assist AR220/14 Locking Screw AR220/15 Lower Posterior Axis AR220/16 Bearing AR220/17 Adjustment Screw for Friction AR220/18 Friction Bushing AR220/19 Washer AR220/20 Locking Screw AR220/21 Upper and Lower Anterior Axis AR220/22 Upper Posterior Axis AR220/23 Washer AR220/24 Bearing AR220/25 Locking plate for Friction Bushing
Page nr: 57
AR410 Modular, polycentric, 4-Axis Knee Joint, Titanium Upper Connection w/ Adjustable Pyramid, Lower connection w/ Tube Adapter
Product Code Description AR410 Knee Joint Complete
AR410/01 Upper Joint Section with Pyramid AR410/02 Pyramid Adapter AR410/03 Posterior Linkage Bar AR410/04 Upper Posterior Axis AR410/05 Bumper AR410/06 Aluminium Disc AR410/07 Washer AR410/08 Washer AR410/09 Anterior Axis (Upper and Lower) AR410/10 Extension Assist Spring AR410/11 Plastic Guide for Extension Assist Spring AR410/12 Adjustment Screw for Extension Assist AR410/13 Tube for Extension Assist Spring AR410/14 Anterior Linkage Bar AR410/15 Locking Screw AR410/16 Lower Posterior Axis AR410/17 Friction Adjustment Screw AR410/18 Friction Bushing AR410/19 Locking Screw AR410/20 Locking Screw AR410/21 Locking Screw AR410/22 Lower Joint Section w/ Tube Adapter AR410/23 Washer AR410/24 Bearing AR410/25 Bearing AR410/26 Locking Screw AR410/27 Locking plate for Friction Bushing AR410/28 Locking Screw
AR410 Weight: 650gr
AR410 is a polycentric knee joint (4-bar linkage). The kinematics of the design provide excellent stability. AR410 is especially recommended for less active and geriatric patients. Adjustable pyramid, higher and more posterior instant center provides the knee with great stability and easy control.
Page nr: 58
AR430 Modular, polycentric, 4-Axis Knee Joint for Knee Disarticulation w/ Adjustable Stance Control, Adjustable Friction and Internal Extension Assist Titanium
Product Code Description AR430 Knee Joint Complete
AR430/01 Upper Joint Section AR430/02 Lamination Adapter AR430/03 Posterior Linkage Bar AR430/04 Upper Posterior Axis AR430/05 Bumper AR430/06 Aluminium Disc AR430/07 Washer AR430/08 Washer AR430/09 Anterior Axis (Upper and Lower) AR430/10 Extension Assist Spring AR430/11 Plastic Guide for Extension Assist Spring AR430/12 Adjustment Screw for Extension Assist AR430/13 Tube for Extension Assist Spring AR430/14 Anterior Linkage Bar AR430/15 Locking Screw AR430/16 Lower Posterior Axis AR430/17 Friction Adjustment Screw AR430/18 Friction Bushing AR430/19 Locking Screw AR430/20 Locking Screw AR430/21 Locking Screw AR430/22 Lower Joint Section w/ Tube Adapter AR430/23 Washer AR430/24 Bearing AR430/25 Bearing AR430/26 Locking Screw AR430/27 Locking plate for Friction Bushing
AR430 Weight: 625gr
Removable ”L” lamination anchor with +/-15 degrees of axial rotation adjustment. Maximum knee flexion of 140 degrees. Structural height of 22mm from axis center to upper surface of lamination anchor.
Page nr: 59
Product Code
Includes Products (Picture 1) Material
Patient’s max.
weight AL-BK1 AL310, PA258,AL210,AL110 Aluminium 80kg AS-BK1 AS310,PS258,AS210,AS110 Steel 100kg AR-BK1 AP310,PP258,AP210,AP110 Titanium 100kg
BK Kits
Picture 1
Lamination Kits
Product Sets (Other Kits)
Product Code Includes Products Material
Patient’s max.
weight ASS113 AS112,AS130 (Picture 2) Steel 100kg ASS114 AS112,AS132 (Picture 3) Steel 100kg ARR113 AR112,AR130 (Picture 2) Titanium 100kg AR114 AR112,AR132 (Picture 3) Titanium 100kg
Product Code Includes Products Material
Patient’s max.
weight ALL115 AL131,AL130 (Picture 4) Aluminium 80kg ALL116 AL131,AL132 (Picture 5) Aluminium 80kg ASS115 AS131,AS130 (Picture 4) Steel 100kg ASS116 AS131,AS132 (Picture 5) Steel 100kg ARR115 AR131,AR130 (Picture 4) Titanium 100kg ARR116 AR131,AR132 (Picture 5) Titanium 100kg
Picture 2
Picture 3
Picture 4 Picture 5
Page nr: 70
SILICONE LINERS
Activity Level
Best Cushioning Best Stability
5
4
3
2
1
Low
Sportsmanlike
SSC6 SF6
SSC3 SF3
STC
SC S05..10..15; SB SPII
SA3
SELECTION CHART
Page nr: 80
Clear Liner, Cushion Product
Code Size
SC/14 14cm SC/16 16cm SC/18 18cm SC/20 20cm SC/21 21cm SC/22 22cm
SC/23.5 23.5cm SC/25 25cm
SC/26.5 26.5cm SC/28 28cm SC/30 30cm SC/32 32cm SC/34 34cm SC/36 36cm SC/38 38cm SC/40 40cm SC/42 42cm SC/45 45cm
10cm long inside lamination with cushioning Wall thickness 2.5mm M10 Pin Connection
Clear Liner, Matrix 10 10cm long inside lamination Wall thickness 2.5mm M10 Pin Connection
Product Code Size
S10/12 12cm S10/14 14cm S10/16 16cm S10/18 18cm S10/20 20cm S10/21 21cm S10/22 22cm
S10/23.5 23.5cm S10/25 25cm
S10/26.5 26.5cm S10/28 28cm S10/30 30cm S10/32 32cm S10/34 34cm S10/36 36cm S10/38 38cm S10/40 40cm S10/42 42cm S10/45 45cm
Activity Level 4
Clear Liner, Matrix 5 Product
Code Size
S15/18 18cm S15/20 20cm S15/21 21cm S15/22 22cm
S15/23.5 23.5cm S15/25 25cm
S15/26.5 26.5cm S15/28 28cm S15/30 30cm S15/32 32cm S15/34 34cm S15/36 36cm S15/38 38cm S15/40 40cm S15/42 42cm S15/45 45cm
5cm long inside lamination Wall thickness 2.5mm M10 Pin Connection
Activity Level 4
Activity Level 4
Clear Liner, Matrix 15 15cm long inside lamination Wall thickness 2.5mm M10 Pin Connection
Activity Level 4
Product Code Size
S05/14 14cm S05/16 16cm S05/18 18cm S05/20 20cm S05/21 21cm S05/22 22cm
S05/23.5 23.5cm S05/25 25cm
S05/26.5 26.5cm S05/28 28cm S05/30 30cm S05/32 32cm S05/34 34cm S05/36 36cm S05/38 38cm S05/40 40cm S05/42 42cm S05/45 45cm
Page nr: 81
Two Color Liner, soft 2mm Skin-colored outside surface 10cm long soft inside lamination Wall thickness 2.0mm top 2.8mm middle 4.8 bottom M10 Pin Connection
Activity Level 3
Clear Liner, BASIC No inside lamination No distal strengthening Wall thickness 2.5mm M10 Pin Connection
Activity Level 4
Clear Liner, BASIC W/O No inside lamination No distal strengthening Wall thickness 2.5mm without Pin Connection
Activity Level 4
Product Code Size
SBO/12 12cm SBO/14 14cm SBO/16 16cm SBO/18 18cm SBO/20 20cm SBO/21 21cm SBO/22 22cm
SBO/23.5 23.5cm SBO/25 25cm
SBO/26.5 26.5cm SBO/28 28cm SBO/30 30cm SBO/32 32cm SBO/34 34cm SBO/36 36cm SBO/38 38cm SBO/40 40cm SBO/42 42cm SBO/45 45cm
Product Code Size
SB/12 12cm SB/14 14cm SB/16 16cm SB/18 18cm SB/20 20cm SB/21 21cm SB/22 22cm
SB/23.5 23.5cm SB/25 25cm
SB/26.5 26.5cm SB/28 28cm SB/30 30cm SB/32 32cm SB/34 34cm SB/36 36cm SB/38 38cm SB/40 40cm SB/42 42cm SB/45 45cm
Product Code Size
STC/16 16cm STC/18 18cm STC/20 20cm STC/21 21cm STC/22 22cm
STC/23.5 23.5cm STC/25 25cm
STC/26.5 26.5cm STC/28 28cm STC/30 30cm STC/32 32cm STC/34 34cm STC/36 36cm STC/38 38cm STC/40 40cm STC/42 42cm STC/45 45cm
Page nr: 82
First Class Liner, 6mm 10cm long inside lamination Wall thickness 6.0mm top 6.0mm middle 6.5 bottom M10 Pin Connection
Activity Level 1
First Class Liner, 3mm 10cm long inside lamination Wall thickness 2.2mm top 3.2 mm middle 6.2 mm bottom M10 Pin Connection
Activity Level 2
First Class Liner, 3mm W/O
Activity Level 2
Product Code Size
SFO3/16 16cm SFO3/18 18cm SFO3/20 20cm SFO3/22 22cm
SFO3/23.5 23.5cm SFO3/25 25cm
SFO3/26.5 26.5cm SFO3/28 28cm SFO3/30 30cm SFO3/32 32cm SFO3/34 34cm SFO3/36 36cm SFO3/40 40cm SFO3/45 45cm
Product Code Size
SF3/16 16cm SF3/18 18cm SF3/20 20cm SF3/22 22cm
SF3/23.5 23.5cm SF3/25 25cm
SF3/26.5 26.5cm SF3/28 28cm SF3/30 30cm SF3/32 32cm SF3/34 34cm SF3/36 36cm SF3/40 40cm SF3/45 45cm
First Class Liner, 6mm W/O
Same as SF3 but without pin connection
Product Code Size
SF6/16 16cm SF6/18 18cm SF6/20 20cm SF6/22 22cm
SF6/23.5 23.5cm SF6/25 25cm
SF6/26.5 26.5cm SF6/28 28cm SF6/30 30cm SF6/32 32cm SF6/34 34cm SF6/36 36cm SF6/40 40cm SF6/45 45cm
Product Code Size
SFO6/16 16cm SFO6/18 18cm SFO6/20 20cm SFO6/22 22cm
SFO6/23.5 23.5cm SFO6/25 25cm
SFO6/26.5 26.5cm SFO6/28 28cm SFO6/30 30cm SFO6/32 32cm SFO6/34 34cm SFO6/36 36cm SFO6/40 40cm SFO6/45 45cm
Activity Level 1
Same as SF6 but without pin connection
Page nr: 83
Product Code Size
SSC3/16 16cm SSC3/18 18cm SSC3/20 20cm SSC3/22 22cm
SSC3/23.5 23.5cm SSC3/25 25cm
SSC3/26.5 26.5cm SSC3/28 28cm SSC3/30 30cm SSC3/32 32cm SSC3/34 34cm SSC3/36 36cm SSC3/40 40cm SSC3/45 45cm
Skin Care Liner, 3mm 10cm long inside lamination thickness 2.2mm top, 3.2 mm middle, 6.2 mm bottom M10 Pin Connection
Activity Level 2
Skin Care Liner, 3mm W/O Same as SSC3 but w/o pin connection and w/o inside lamination
Product Code Size
SSCO3/16 16cm SSCO3/18 18cm SSCO3/20 20cm SSCO3/22 22cm
SSCO3/23.5 23.5cm SSCO3/25 25cm
SSCO3/26.5 26.5cm SSCO3/28 28cm SSCO3/30 30cm SSCO3/32 32cm SSCO3/34 34cm SSCO3/36 36cm SSCO3/40 40cm SSCO3/45 45cm
Skin Care Liner, 6mm Skin Care Liner, 6mm W/O
Product Code Size
SSCO6/16 16cm SSCO6/18 18cm SSCO6/20 20cm SSCO6/22 22cm
SSCO6/23.5 23.5cm SSCO6/25 25cm
SSCO6/26.5 26.5cm SSCO6/28 28cm SSCO6/30 30cm SSCO6/32 32cm SSCO6/34 34cm SSCO6/36 36cm SSCO6/40 40cm SSCO6/45 45cm
Product Code Size
SSC6/16 16cm SSC6/18 18cm SSC6/20 20cm SSC6/22 22cm
SSC6/23.5 23.5cm SSC6/25 25cm
SSC6/26.5 26.5cm SSC6/28 28cm SSC6/30 30cm SSC6/32 32cm SSC6/34 34cm SSC6/36 36cm SSC6/40 40cm SSC6/45 45cm
Same as SSC6 but w/o pin connection and w/o inside lamination
10cm long inside lamination thickness 6.0mm top, 6.0 mm middle, 6.5 mm bottom M10 Pin Connection
Activity Level 2
Activity Level 1 Activity Level 1
Page nr: 84
Perfect Socket II Further developed silicone liner for BK and AK applications Textile covered M10 Pin Connection
Same as SPII but w/o pin connection
Activity Level 4
3mm/3mm 3mm/6mm 3mm/9mm
Product Code Size Distal Proximal Wall
Thickness SPII3/M Medium 20-27cm 25-35cm 3mm/3mm SPII3/L Large 26-38cm 34-56cm 3mm/3mm
SPII3/XL X Large 38-53cm 44-70cm 3mm/3mm SPII6/M Medium 20-27cm 25-35cm 3mm/6mm SPII6/L Large 26-38cm 34-56cm 3mm/6mm
SPII6/XL X Large 38-53cm 44-70cm 3mm/6mm SPII9/M Medium 20-27cm 25-35cm 3mm/9mm SPII9/L Large 26-38cm 34-56cm 3mm/9mm
SPII9/XL X Large 38-53cm 44-70cm 3mm/9mm
Perfect Socket II W/O
Product Code Size Distal Proximal Wall
Thickness SPIIO3/M Medium 20-27cm 25-35cm 3mm/3mm SPIIO3/L Large 26-38cm 34-56cm 3mm/3mm
SPIIO3/XL X Large 38-53cm 44-70cm 3mm/3mm SPIIO6/M Medium 20-27cm 25-35cm 3mm/6mm SPIIO6/L Large 26-38cm 34-56cm 3mm/6mm
SPIIO6/XL X Large 38-53cm 44-70cm 3mm/6mm SPIIO9/M Medium 20-27cm 25-35cm 3mm/9mm SPIIO9/L Large 26-38cm 34-56cm 3mm/9mm
SPIIO9/XL X Large 38-53cm 44-70cm 3mm/9mm
Page nr: 85
Active Care Liner, 3mm 10cm long inside lamination Wall thickness 2.2mm top 3.2 mm middle 6.2 mm bottom M10 Pin Connection
Activity Level 5
Product Code Size
SA3/16 16cm SA3/18 18cm SA3/20 20cm SA3/22 22cm
SA3/23.5 23.5cm SA3/25 25cm
SA3/26.5 26.5cm SA3/28 28cm SA3/30 30cm SA3/32 32cm SA3/34 34cm
Active Care Liner, 3mm W/O Same as SF3 but without pin connection and without inside lamination
Activity Level 5
Product Code Size
SAO3/16 16cm SAO3/18 18cm SAO3/20 20cm SAO3/22 22cm
SAO3/23.5 23.5cm SAO3/25 25cm
SAO3/26.5 26.5cm SAO3/28 28cm SAO3/30 30cm SAO3/32 32cm SAO3/34 34cm
Page nr: 86
FG122...129 L-R
FG222...228 L-R (Single Axis Foot)
FS122..129 L-R
SACH FEET Children models (with toes)
Product Code Size Weight/
Bolt Size Heel
Height
Patient’s max.
weight FC116L..R 16cm 110g/M8 5mm 55kg FC118L..R 18cm 150g/M8 5mm 55kg FC120L..R 20cm 210g/M8 5mm 55kg FC216L..R 16cm 110g/M8 10mm 55kg FC218L..R 18cm 150g/M8 10mm 55kg FC220L..R 20cm 210g/M8 10mm 55kg
FC116..120 L-R Plastic heel reinforcement
FC216..220 L-R Foamed heel
Product Code Size Weight/
Bolt Size Heel
Height
Patient’s max.
weight FS122L..R 22cm 310g/M8 10mm 100kg FS123L..R 23cm 370g/M10 10mm 100kg FS124L..R 24cm 420g/M10 10mm 100kg FS125L..R 25cm 450g/M10 10mm 100kg FS126L..R 26cm 500g/M10 10mm 100kg FS127L..R 27cm 540g/M10 10mm 100kg FS128L..R 28cm 620g/M10 10mm 100kg FS129L..R 29cm 650g/M10 10mm 100kg
SHOWER FEET (with toes)
Product Code Size Weight/
Bolt Size Heel
Height
Patient’s max.
weight FG122L..R 22cm 240g/M8 15mm 85kg FG123L..R 23cm 260g/M10 15mm 85kg FG124L..R 24cm 280g/M10 15mm 85kg FG125L..R 25cm 330g/M10 15mm 85kg FG126L..R 26cm 360g/M10 15mm 85kg FG127L..R 27cm 400g/M10 15mm 85kg FG128L..R 28cm 440g/M10 15mm 85kg FG129L..R 29cm 500g/M10 15mm 85kg FG222L..R 22cm 195g/22-25 15mm 75kg FG223L..R 23cm 225g/22-25 15mm 75kg FG224L..R 24cm 275g/22-25 15mm 75kg FG225L..R 25cm 300g/22-25 15mm 75kg FG226L..R 26cm 365g/26-30 15mm 75kg FG227L..R 27cm 390g/26-30 15mm 75kg FG228L..R 28cm 450g/226-30 15mm 75kg
GERIATRIC FEET (Light, with toes)
Page nr: 90
FM422..429 L-R (Dynamic Foot)
FM522..529 L-R (Single Axis Foot)
FM122..129 L-R Plastic heel reinforcement
FM222..229 L-R Foamed heel
FEET for MEN (with toes)
Product Code Size Weight/
Bolt Size Heel
Height
Patient’s max.
weight FM122L..R 22cm 290g/M8 18mm 100kg FM123L..R 23cm 350g/M10 18mm 100kg FM124L..R 24cm 380g/M10 18mm 100kg FM125L..R 25cm 420g/M10 18mm 100kg FM126L..R 26cm 480g/M10 18mm 100kg FM127L..R 27cm 520g/M10 18mm 100kg FM128L..R 28cm 580g/M10 18mm 100kg FM129L..R 29cm 640g/M10 18mm 100kg FM222L..R 22cm 295g/M8 18mm 100kg FM223L..R 23cm 360g/M10 18mm 100kg FM224L..R 24cm 395g/M10 18mm 100kg FM225L..R 25cm 440g/M10 18mm 100kg FM226L..R 26cm 495g/M10 18mm 100kg FM227L..R 27cm 530g/M10 18mm 100kg FM228L..R 28cm 595g/M10 18mm 100kg FM229L..R 29cm 660g/M10 18mm 100kg FM323L..R 23cm 520g/M10 18mm 150kg FM324L..R 24cm 550g/M10 18mm 150kg FM325L..R 25cm 585g/M10 18mm 150kg FM326L..R 26cm 630g/M10 18mm 150kg FM327L..R 27cm 680g/M10 18mm 150kg FM328L..R 28cm 730g/M10 18mm 150kg FM329L..R 29cm 790g/M10 18mm 150kg FM422L..R 22cm 310g/M8 15mm 100kg FM423L..R 23cm 365g/M10 15mm 100kg FM424L..R 24cm 410g/M10 15mm 100kg FM425L..R 25cm 450g/M10 15mm 100kg FM426L..R 26cm 500g/M10 15mm 100kg FM427L..R 27cm 540g/M10 15mm 100kg FM428L..R 28cm 600g/M10 15mm 100kg FM429L..R 29cm 660g/M10 15mm 100kg FM522L..R 22cm 260g/22-25 25mm 100kg FM523L..R 23cm 310g/22-25 25mm 100kg FM524L..R 24cm 330g/22-25 25mm 100kg FM525L..R 25cm 370g/22-25 25mm 100kg FM526L..R 26cm 430g/26-30 25mm 100kg FM527L..R 27cm 470g/26-30 25mm 100kg FM528L..R 28cm 500g/26-30 25mm 100kg FM529L..R 29cm 540g/26-30 25mm 100kg
FM323..329 L-R Plastic heel reinforcement
150kg
Page nr: 91
FL423..425 L-R (Dynamic Foot)
FL223..225 L-R Foamed heel
FL523..525 L-R (Single Axis Foot)
FL123..125 L-R Plastic heel reinforcement
Product Code Size Weight/
Bolt Size Heel
Height
Patient’s max.
weight FL123L..R 23cm 350g/M8 35mm 100kg FL124L..R 24cm 380g/M8 35mm 100kg FL125L..R 25cm 420g/M8 35mm 100kg FL223L..R 23cm 360g/M8 35mm 100kg FL224L..R 24cm 395g/M8 35mm 100kg FL225L..R 25cm 440g/M8 35mm 100kg FL423L..R 23cm 310g/M8 35mm 100kg FL424L..R 24cm 365g/M8 35mm 100kg FL425L..R 25cm 410g/M8 35mm 100kg FL523L..R 23cm 310g/22-25 35mm 100kg FL524L..R 24cm 330g/22-25 35mm 100kg FL525L..R 25cm 370g/22-25 35mm 100kg
FEET for WOMEN (with toes)
Page nr: 92
Advantage KAFO KIT
The Kit includes everything to fabricate a KAFO, except the leather. The contents of the Kit is as follows: • One pair of KJ2000 Ring Lock Knee Joints. For free motion remove both rings. • One pair of AJ2000 Double action Ankle Joints • Stirrup (Specify your choice of Stirrup size in your order) • Aluminium Band Stock • Padding for Bands • Alu, Copper and Stainless Steel Rivets • Chafes and Loops • Hook and Pile
NOTE: This is a kit. Assembly is required
1 Pair 1 Pair
1 Pair NOTE: Specify your choice of Stirrup size in your order
Available Stirrup sizes: L=203mm, 216mm, 229mm, 241mm, 254mm, 267mm, 279mm
L
Page nr: 100
Advantage AFO KIT
The Kit includes everything to fabricate an AFO, except the leather. The contents of the Kit is as follows: • One pair of AJ2000 Double action Ankle Joints with Uprights • Stirrup (Specify your choice of Stirrup size in your order) • Aluminium Calf Band • Padding for Bands • Alu and Copper Rivets • Chafes and Loops • Hook and Pile
NOTE: This is a kit. Assembly is required
1 Pair
1 Pair NOTE: Specify your choice of Stirrup size in your order
Available Stirrup sizes: L=203mm, 216mm, 229mm, 241mm, 254mm, 267mm, 279mm
L
Page nr: 101