69DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
Safety Break-away Couplings - Breaking Bolt Series
The breaking bolt industrial breakaway coupling is designed to minimize spillage and damage associated with drive away and pull away incidents• designed to be installed between a fixed point (pipe, pump,
manifold) and a hose• coupling automatically senses an excessive load, closes the
valves and disconnects• high flow rate / low pressure drop• female NPT is standard, optional ANSI / DIN flanges or male
NPT are available• stainless steel or aluminum• working pressure: stainless steel 360 PSI and
aluminum 230 PSI at ambient temperature (70°F)• Viton® is standard seal
Size Width LengthWeight in Lbs. Flow
Rate/GPMstainless aluminum
2"3"4"5"6"8"
4.5"6.8"8.3"
10.6"12"
13.5"
7"11"12"14"16"
17.7"
5183471
101157
38
14273566
200650800110015003700
Industrial Version
How it Works
Marine VersionThe breaking bolt marine version break-away coupling is designed to minimize spillage and damage associated with pull-away incidents.• designed to be installed within a hose string where the
coupling will have a length of hose attached to both sides• typical applications include: ship-to-offshore platform and ship-
to-ship product transfer operations• coupling automatically senses an excessive load, closes the
valves and disconnects• release is executed when force causes bolts to break• female NPT is standard, optional ANSI / DIN flanges or male
NPT are available• working pressure: 360 PSI at ambient temperature (70°F)• 316T1 stainless steel body with Viton® O-rings
Size Width Length Weight in Lbs. Flow Rate/GPM
2"3"4"5"6"8"
4.5"6.8"8.3"
10.6"12"
13.5"
7"11"12"14"16"
17.7"
5.718.834.1
71101157
200650800110015003700
Optional Non-Closure DesignThe non-closure design is an economical alternative which allows the coupling to break away due to pull-away/drive-away incidents
thus protecting piping systems and equipment. This design allows spillage of product in these instances due to the lack of valving in the coupling.
Useful in applications where non-hazardous product is being conveyed and where there are no environmental concerns. Available in both Industrial and Marine versions. Consult the factory for more information.
1 150# ASA flange
1 150# ASA flange
Size DN Stainless SteelPart # Price/E
2"3"4"5"6"6"8"
5080100125150150200
MSBC200SSMSBC300SSMSBC400SSMSBC500SSMSBC600SSMSBC600SSFL 1
MSBC800SSFL 1
$4272.007555.00
11610.00POR
35890.0037566.00
POR
Size DN Stainless Steel AluminumPart # Price/E Part # Price/E
2"3"4"5"6"8"
5080100125150200
SBC200SSSBC300SSSBC400SSSBC500SSSBC600SSSBC800SSFL 1
$3561.006296.009670.00
POR32630.00
POR
SBC200ALSBC300ALSBC400ALSBC500ALSBC600AL---
$1662.003228.004937.00
POR23990.00
---
POR32630.00
POR23990.00
Safety break-away couplings have three external break bolts. In the case of axial tension all of the bolts take up the force corresponding to the break force on the hose with a safety margin. Non-axial forces concentrate the tension forces more strongly on one bolt, so that the safety break-away coupling reacts in a natural way to the reduction of the hose break forces.
The safety break-away valve consists of two halves, each with a valve that has an O-ring seal.
BEFOREemergency disconnect
When the safety break-away couplings separate, it allows the valves to close. The two valves close rapidly, minimizing exposure to personnel and the environment.
AFTERemergency disconnect
70 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
Dry Disconnect CouplingsDry disconnect couplings are designed for the quick and spill free connection and disconnection of hoses and pipelines when transferring expensive hazardous product that is costly to clean up, reprocess or dispose of. Dry disconnects are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids.
How it Works
Interchanges with Avery Hardoll and Todo-matic®
The principle of operation is identical for all sizes of couplings.
Closed:• Turn and pull it's released - no spillage
Open:• Push and turn it's coupled - full flow
• Easy to handle - push and turn - free flow, turn and pull - closed
• Time saving - no need to drain hoses or pipe systems• Economical - no loss or spillage of liquids at connection or
disconnection• Safety - the valve cannot be opened until the unit is coupled• Environment friendly - accidental spillage eliminated when
proper used• Safe and reliable - due to rugged construction• Product life - uncomplicated design and high quality
materials ensures long product life• Selectivity - To avoid product contamination caused by
connecting a coupler to the wrong adapter, selective versions of the adapters are available. Contact the factory for further information.
• produced according to NATO standard STANAG 3756 and ATOFINA SGM 2049.TUY.C.
• Working Pressure (at ambient temperature (70°F): aluminum: 300 PSI, up to 4" brass/ gunmetal *: 300 PSI, up to 4" stainless steel: 360 PSI• Optional seals: EPDM NBR - nitrile Kalrez®
Chemraz®
Perlast®
• Seal kits are available
* produced to US government bronze specification G
71DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
Dry Quick Disconnect Couplers
Coupler - Hose Unit
• coupler has built-in swivel• stainless steel ball bearings• shaft journal in stainless steel embedded in PTFE (Teflon®)
to eliminate seizure• riveted piston pin to minimize the risk for failure under
extreme pressure conditions• the protective ring is a specially formulated, weather
resistant and electrically conductive rubber compound
Dust Plugs for Couplers
Size Body SizePolyeten PE-HD 300Part # Price/E
¾" and 1"1½" and 2"
3"3"4"6"
56 mm70 mm105 mm119 mm164 mm238 mm
DDDP075DDDP150DDDP300105DDDP300DDDP400DDDP600 *
$104.75109.05112.50112.50224.95679.05
* 6" dust plug is aluminum
dry quick disconnect couplers x female NPT with Viton® seals
Female NPT Body Size316 Stainless Steel Anodized Aluminum Brass / Gunmetal *Part # Price/E Part # Price/E Part # Price/E
¾"1"
1½"2"3"3"4"6"
56 mm56 mm70 mm70 mm105 mm119 mm164 mm238 mm
DDC075SSDDC100SSDDC150SSDDC200SSDDC300SS105DDC300SSDDC400SSDDC600SS
$2130.002130.003586.003586.005527.005556.009657.00
24660.00
DDC075ALDDC100ALDDC150ALDDC200ALDDC300AL105DDC300ALDDC400ALDDC600AL
$1112.001112.001499.001499.001665.001681.003669.00
15860.00
DDC075BRDDC100BRDDC150BRDDC200BRDDC300GM105DDC300GMDDC400GM---
$1560.001560.001823.001823.002421.002718.005039.00
---
¾" and 1" design
1½" and 2" design
3" and 4" design
6" design
• all wetted parts are stainless steel• stainless steel couplers: rollers are Hastelloy C276 on the
stainless steel shaft• aluminum and brass couplers: rollers are aluminum-bronze
on the stainless steel shaft• Composite (Polyeten PE-HD 300) plugs provide very good
protection against corrosion and withstand hot and cold environments.
* produced to US government bronze specification G
72 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
Dry Quick Disconnect Adapters
Adapter - Tank Unit
• adapter is usually installed on the tank or manifold• conical valve seat reduces the risk for piston blow out• PTFE (Teflon®) bearing between the piston shaft and the
piston guide eliminate the risk for seizure• available in female NPT, 150# ASA flange or TTMA• Composite (Polyeten PE-HD 300) caps provide very good
protection against corrosion and withstand hot and cold environments.
Dust Caps for Adapters
dry quick disconnect adapters x female NPT with Viton® sealsFemale
NPTBody Size
316 Stainless Steel Anodized Aluminum Brass / Gunmetal *Part # Price/E Part # Price/E Part # Price/E
¾"1"
1½"2"3"3"4"6"
56 mm56 mm70 mm70 mm105 mm119 mm164 mm238 mm
DDA075SSDDA100SSDDA150SSDDA200SSDDA300SS105DDA300SSDDA400SSDDA600SS
$775.25775.25
1179.001179.001478.001399.002740.00
10560.00
DDA075ALDDA100ALDDA150ALDDA200ALDDA300AL105DDA300ALDDA400ALDDA600AL
$558.90558.90454.15454.15561.45574.35
1133.007226.00
DDA075BRDDA100BRDDA150BRDDA200BRDDA300GM105DDA300GMDDA400GM---
$635.30635.30522.00522.00753.75789.80
1844.00---
Construction:• aluminum adapter - aluminum poppet, stainless steel internal parts• stainless steel adapter - stainless steel poppet, stainless steel internal parts• brass / gunmetal * adapter - brass poppet, brass and stainless steel internal parts
dust capcomposite
dust caprubber
female NPT x adapter
150# flange x adapter
TTMA flange x adapter
dry quick disconnect adapters x 150# ASA flange with Viton® seals150#
FlangeBody Size
316 Stainless Steel Anodized Aluminum Brass / Gunmetal *Part # Price/E Part # Price/E Part # Price/E
¾"1"
1½"2"3"3"4"6"
56 mm56 mm70 mm70 mm105 mm119 mm164 mm238 mm
DDA075SSFLDDA100SSFLDDA150SSFLDDA200SSFLDDA300SS105FLDDA300SSFLDDA400SSFLDDA600SSFL
$1444.001444.001409.001409.001561.001952.003344.00
11250.00
---DDA100ALFLDDA150ALFLDDA200ALFLDDA300AL105FLDDA300ALFLDDA400ALFLDDA600ALFL
---$993.30717.70717.70834.45931.45
1353.007656.00
---DDA100BRFLDDA150BRFLDDA200BRFLDDA300GM105FLDDA300GMFLDDA400GMFL---
---$1129.00
997.55997.55
1105.001215.002272.00
---
* 6" dust cap is aluminum
Size Body Size Polyeten PE-HD 300Part # Price/E
¾" and 1"1½" and 2"
3"3"4"6"
56 mm70 mm
105 mm119 mm164 mm238 mm
DDDC075DDDC150DDDC300105DDDC300DDDC400DDDC600 *
$170.00186.30206.05229.25431.00
2198.40
dry quick disconnect adapters x TTMA flange with Viton® sealsTTMA Flange Body Size
Anodized AluminumPart # Price/E
3"3"4"
105 mm119 mm164 mm
DDA300AL105TTMADDA300AL119TTMADDA400AL164TTMA
$834.45931.45
1353.00
Size Body Size RubberPart # Price/E
2"3"
71 mm119 mm
DGDC200DGDC300
$97.90228.40
DGDC200DGDC300
* produced to US government bronze specification G
73DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
Dry Aviation Couplings
Coupler - Hose Unit
Technical Information:• body: high strength aluminum• coupling ring: gunmetal (procuced to U.S. government
bronze specification G)• bayonet flange and inner parts: stainless steel, aluminum• all wetted parts are aluminum and stainless steel
Dry aviation couplings are designed for use in aviation refueling systems. Manufactured to accept the international standard 2½" point bayonet, hose end refueling nozzles according to: ISO45 / MS24484 / STANAG 3105 / British Aerospace Spec. 2C14. They are not configured for under-wing refueling.
• 150 PSI working pressure at ambient temperature (70°F)• Composite (Polyeten PE-HD 300) plug provides good
protection against corrosion and withstands hot and cold environments.
aviation couplers x female NPT with Viton® seals
Female NPT Body SizeAluminum
Part # Price/E2½"3"
ISO 45ISO 45
DAC250ALDAC300AL
$2137.002137.00
• stainless steel ball bearings• gunmetal coupling ring minimizes the risk of seizure• stainless steel shaft journal embedded in PTFE (Teflon®) eliminate seizure• PTFE (Teflon®) bearings between the driving plate and the piston guide eliminate the risk of
seizure• riveted piston pin minimizes the risk of failure under extreme pressure conditions• the protective ring is a specially formulated, weather resistant and electrically conductive
rubber compound
aviation couplers x female BSP with Viton® seals
Female BSP Body SizeAluminum
Part # Price/E2½"3"
ISO 45ISO 45
DAC250ALBSPDAC300ALBSP
$2137.002137.00
female thread x coupler
Sight Flow Indicator with Filter / Screen
Dust Plug for Couplers
Size Body SizePolyeten PE-HD 300
Part # Price/E2½" ISO 45 DADP250 $264.45
• filter / screen can be inspected through the sight glass• filter / screen is easily removed if cleaning is required• screen is 100 mesh
aviation sight flow indicator with filter / screenFemale Thread Male Thread
AluminumPart # Price/E
2½" NPT3" NPT
2½" NPT3" NPT
2½" BSP3" BSP
2½" NPT3" NPT
ASFI25T25BASFI30T30BASFI25T25TASFI30T30T
$1448.001448.001448.001448.00
74 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
Dry Aviation Couplings
aviation adapters x female NPT with Viton® seals
Female NPT Body SizeAluminum
Part # Price/E2½"3"
ISO 45ISO 45
DAA250ALDAA300AL
$1264.001264.00
Adapter - Tank Unit• gunmetal coupling ring minimizes the risk of seizure• PTFE (Teflon®) bearings between the piston shaft and the piston guide eliminate the risk of
seizure• conical valve seat eliminates the risk of piston blow out when extreme pressure is used
aviation adapters x 150# ASA flange with Viton® seals
150# Flange Body SizeAluminum
Part # Price/E2½"3"
ISO 45ISO 45
DAA250ALFLDAA300ALFL
$1467.001467.00
Dust Cap for Adapters
Size Body SizePolyeten PE-HD 300
Part # Price/E2½" ISO 45 DADC250 $181.15
female thread x adapter
150# flange x adapter
Technical Information:• body: high strength aluminum• coupling ring: gunmetal• bayonet flange and inner parts: stainless steel, aluminum• all wetted parts are in aluminum and stainless steel
Dry aviation couplings are designed for use in aviation refueling systems. Manufactured to accept the international standard 2½" point bayonet, hose end refueling nozzles according to: ISO45 / MS24484 / STANAG 3105 / British Aerospace Spec. 2C14. They are not configured for under-wing refueling.
• 150 PSI working pressure at ambient temperature (70°F)• Composite (Polyeten PE-HD 300) cap provides good
protection against corrosion and withstands hot and cold environments.
75DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
1½" and 2" coupler x female NPT
3" coupler x female NPT
Dry Break Cam and Groove Dry Disconnect CouplingsCouplers
Female NPT
Coupler Size Seal Material
Max. PSI at
70°
Stainless Steel 1
Part # Price/E
1½"2"
2"2½"
Teflon® Encapsulated Viton® & Kalrez®
Teflon® Encapsulated Viton® & Kalrez®210150
DBC77-150-GLDBC77-200-GL
$2620.552891.00
greaseless coupler x female NPT
Locking Kit for CouplersDescription Aluminum
Part # Price/Efor use with 1½" and 2" dry disconnect couplers
for use with 3" dry disconnect couplersDBCL-200DBCL-300
$165.55165.55
Must be used with a DBA style adapter for coupler to operate.Adapter sold separately.1 stainless steel corrosion resistance is comparable to 304 stainless steel2 Kalrez® gasket, main seal O-ring and handle O-ring. Teflon® seals on cylinder assembly, stuffing box, and seal under poppet
screw. coupler x female NPT
Female NPT
Coupler Size Seal Material
Max. PSI at
70°
Aluminum Stainless Steel 1
Part # Price/E Part # Price/E
1½"2"3"
1½"2"3"
1½"2"3"
1½"2"3"
1½"2"3"
1½"2"3"3"
2"2½"4"2"
2½"4"2"
2½"4"2"
2½"4"2"
2½"4"2"
2½"4"4"
Buna
Viton®
Teflon® Encapsulated Silicone & Kalrez®
EPT
Kalrez® and Teflon® 2
Teflon® Encapsulated Viton® & Kalrez®
Viton® B
210150120210150120210150120210150120210150120210150120120
DBC61-150DBC61-200DBC61-300DBC62-150DBC62-200DBC62-300DBC63-150DBC63-200DBC63-300DBC64-150DBC64-200DBC64-300---DBC66-200------------DBC69-300
$702.50739.70
1540.95762.50828.85
1719.951730.151982.853212.551096.101216.251993.50
---4585.20
------------
2097.15
DBC71-150DBC71-200DBC71-300DBC72-150DBC72-200DBC72-300DBC73-150DBC73-200DBC73-300DBC74-150DBC74-200DBC74-300DBC76-150DBC76-200DBC76-300DBC77-150DBC77-200DBC77-300DBC79-300
$1636.251818.053803.301696.001913.804006.102376.752731.355372.501696.001917.804006.105090.255520.30
11122.502436.502709.204979.654205.90
coupler x 90° swivel female NPT
Female NPT
Coupler Size Seal Material
Max. PSI at
70°
Aluminum
Part # Price/E
2"2"2"
2½"2½"2½"
BunaViton®
Teflon® Encapsulated Silicone & Kalrez®
150150150
DBS61-200DBS62-200DBS63-200
$897.201034.001982.85
• dry disconnect coupler has automatic closing poppet assembly• heavy duty stainless steel crank and link provide long service
life• stainless steel handle allows product exposure to corrosive
chemicals or washdown service• strong handle attachment prevents bending of crank assembly• fully interchangeable with Kamvalok (OPW trademark) style
fittings
• aluminum fittings have stainless steel internals1
• for pressure ratings at other temperatures, contact the factory
• Dixon EZ Boss-Lock cam arms provide high security from accidental opening due to vibration or snagging on 1½" and 2" fittings
• large paddle type cam arms allow for an easy grip on 3" fittings
76 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
Dry Break Cam and Groove Dry Disconnect Couplings
• two-piece adapter design for easy rebuilding of adapters• fully interchangeable with Kamvalok (OPW trademark) style fittings• aluminum fittings have aluminum nose piece and brass piston• for pressure ratings at other temperatures, contact the factory
Adapters
Compatible with most cam and groove style dry disconnects. The Bayco dry disconnect helps prevent spillage from normal or accidental disconnects. A spring loaded sealing device is designed to snap closed should the valve become disconnected with the poppet open, significantly limiting liquid loss.
Our dry disconnect couplings are available in a wide range of sizes, metals, and seal materials. Please refer to our product description cross-reference chart for details. Contact the Dixon at 800-355-1991 for chemical compatibility, size, and material selection. Special configurations can be designed for your application.
Female NPSM
Adapter Size Seal Material
Max. PSI at
70°
Stainless Steel 1
Part # Price/E
2" 3" Teflon® 150 DBAV73-2030 $665.45
vapor adapter x female thread
1½" and 2" adapter
3" adapter
adapter x female NPT
Female NPT
Adapter Size Seal Material
Max. PSI at
70°
Aluminum Stainless Steel 1
Part # Price/E Part # Price/E
1½"2"3"
1½"2"3"
1½"2"3"
1½"2"3"
1½"2"3"
1½"2"3"3"
2"2½"4"2"
2½"4"2"
2½"4"2"
2½"4"2"
2½"4"2"
2½"4"4"
Buna
Viton®
Teflon® Encapsulated Silicone
EPT
Kalrez®
Teflon® Encapsulated Viton®
Viton® B
210150120210150120210150120210150120210150120210150120120
DBA11-150DBA11-200DBA11-300DBA12-150DBA12-200DBA12-300DBA63-150DBA63-200DBA63-300DBA64-150DBA64-200DBA64-300DBA66-150DBA66-200DBA66-300---------DBA69-300
$186.60202.25411.90190.50208.20426.95259.15298.45617.50239.55272.90530.10798.95983.45
1706.95---------
623.70
DBA71-150DBA71-200DBA71-300DBA72-150DBA72-200DBA72-300DBA73-150DBA73-200DBA73-300DBA74-150DBA74-200DBA74-300DBA76-150DBA76-200DBA76-300DBA77-150DBA77-200DBA77-300---
$486.35637.50
1228.30486.35624.90
1244.15491.60629.15
1442.00499.00510.45
1350.251071.251146.852595.00
540.90656.45
1314.40---
Female NPT
Adapter Size Seal Material
Max. PSI at
70°
Aluminum
Part # Price/E
2"2"
2"2"
BunaViton®
150150
DBA11-1520DBA12-1520
$195.00205.20
jump size adapter x female NPT
1 stainless steel corrosion resistance is comparable to 304 stainless steel
adapter x 150# ASA flange
FlangeSize
Adapter Size Seal Material
Max. PSI at
70°
Stainless Steel 1
Part # Price/E
2"
2"
3"
2"
2½"
4"
Viton®
Teflon® Encapsulated SiliconeEPT
Kalrez®
Viton®
Teflon® Encapsulated SiliconeEPT
Kalrez®
Viton®
Teflon® Encapsulated SiliconeEPT
Kalrez®
150
150
120
DBAF72-1520DBAF73-1520DBAF74-1520DBAF76-1520DBAF72-200DBAF73-200DBAF74-200DBAF76-200DBAF72-300DBAF73-300DBAF74-300DBAF76-300
$1138.201149.501149.501667.501175.551185.501185.501872.301872.401951.601951.603082.60
NEW for2011!!
77DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
Dry Gas Couplings
Coupler - Hose Unit
• safe handling of LPG• easy to use and saves time• reliable and easy to maintain• can be coupled to a tank unit with pressures up to 225 PSI• minimizes the risk of cold burns• minimizes spillage and product loss• minimizes health risks• keeps the environment free of hazardous vapors and liquids• compatible with existing dry disconnect couplings
Technical Information:• stainless steel and brass / gunmetal (produced to US
government bronze specification G)• Viton® seals• female NPT and ASA flanges• 360 PSI working pressure at ambient temperature (70°F)• Composite (Polyeten PE-HD 300) plugs provide good
protection against corrosion and withstand hot and cold environments.
Dust Plugs for Couplers
Adapter - Tank Unit
Dust Caps for Adapters
dry gas couplers x female NPT with Viton® seals
Female NPT Body Size 316 Stainless SteelPart # Price/E
1"2"3"
56 mm71 mm119 mm
DGC100SSDGC200SSDGC300SS
$2702.004071.005555.00
Size Body Size Polyeten PE-HD 300Part # Price/E
1"2"3"
56 mm71 mm119 mm
DGDP100DGDP200DGDP300
$97.90112.50112.50
dry gas adapters x 150# ASA flange with Viton® seals
150# Flange Body Size 316 Stainless SteelPart # Price/E
1"2"3"
56 mm71 mm119 mm
DGA100SSFLDGA200SSFLDGA300SSFL
$1590.001692.001952.00
female NPT x coupler
female NPT x adapter
Dry gas couplings are designed for safe loading and discharge of bobtails or intermediate bulk delivery trucks. They are quick and easy to connect and can be connected to a tank unit with pressures up to 225 PSI at ambient temperature (70°F). If the pressure is higher you can equip the couplings with a pressure relief valve. The easy to connect pressure relief valve dissipates trapped fluid pressure into the hose coupler without spillage. The primary application of dry gas couplings is in the handling of LPG - Propane and Butane.
150# flange x adapter
dry gas adapters x female NPT with Viton® seals
Female NPT Body Size 316 Stainless SteelPart # Price/E
1"2"3"
56 mm71 mm119 mm
DGA100SSDGA200SSDGA300SS
$970.101264.001398.00
Size Body Size Material Part # Price/E1"2"3"
56 mm71 mm119 mm
polyeten PE-HD300rubberrubber
DGDC100DGDC200DGDC300
$86.7597.90
228.40
dry gas adapters x female ACME thread with Viton® sealsFemale ACME Body Size 316 Stainless Steel
Part # Price/E1¾"3¼"
56 mm71 mm
DGA100SS175DGA200SS325
$1304.102117.90
NEW for2011!!
78 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
Flomax Part Number Cross-reference
Dixon Part # Caterpillar®
part #Wigginspart #
Engine Oil NozzlesR-ENR-EN-PR-EN-PLUG
Engine Oil ReceiversR-ERR-ER-CR-ER-CAP
Coolant Fluid NozzlesR-CNR-CN-PR-CN-PLUG
Coolant Fluid ReceiversR-CRR-CR-CR-CR-CAP
Hydraulic Oil NozzlesR-HNR-HN-PR-HN-PLUG
Hydraulic Oil ReceiversR-HRR-HR-CR-HR-CAP
Transmission Fluid NozzlesR-TNR-TN-PR-TN-PLUG
Transmission Fluid ReceiversR-TRR-TR-CR-TR-CAP
---------
---------
---------
---------
---------
---------
---------
---------
R15------
R16------
R11------
R12------
R17------
R18------
R13------
R14------
R Series Connectors
Dixon Part # Caterpillar®
part #Wigginspart #
NozzlesFN600FN600BLFN600B-PLUG
ReceiversFRSFRS-CFRAFRA-CFR-CAPFR2FR2-CFR2-RGFR-0GFR-45GFR-90GFR1-0GFR1-45GFR1-90FNSFNS2FN600SFNS10
---
---
269000---
269000---
9D0630---------------------------------------
ZZ99A1
---
ZN2AZNC2AZN2A
ZNC2AZC20P
---------
ZN6A---
ZN6BZN6B
---ZN6BZS9---------
Diesel Fueling System
Dixon Part # Caterpillar®
part #Wigginspart #
VT VT7 VT9 VTT
6G7803---------
ZV10------
ZV10C
Fuel Vent Series
Standard Series Connectors
Dixon Part # Caterpillar®
part #Wigginspart #
Engine Oil Nozzles ENBL ENBL-P ENBL-PLUG ERJEngine Oil Receivers ERS ERS-C ERS-CAPCoolant Fluid Nozzles CN CN-P CN-PLUGCoolant Fluid Receivers CR-S CR-C CR-CAPHydraulic Oil Nozzles HN HN-P HN-PLUGHydraulic Oil Receivers HR HR-C HR-CAPTransmission Fluid Nozzles TN TN-P TN-PLUGTransmission Fluid Receivers TR TR-C TR-CAP
9S9273---
9S9274---
9S9271---
9S9272
108-5455---
108-5456
IQ5459---
5P3587
108-5433------
108-5454---
IQ-5468
126-7538------
108-5456---
SP3587
OS2OSP2OP-12ON6
ON2ONC2AO3B12P
EC280B8---
1209-8
EC285A8---
1208-8
6000B12---
6009-12
6005A12---
6008-12
C-1807---
P-1844
P-1804---
P-1880
79DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
standard
double
Flomax Diesel Fueling System
Diesel Fuel Nozzle
Designed for on-site refueling of construction, mining, forestry and agricultural equipment. Interchanges with Caterpillar® and Wiggins systems.
• 1½" female NPT• integrated high flow swivel• integrated sealing plug• plug/bumper assembly gives complete nose seal• stainless steel dog latch mechanism and ball lock styles
available
• tested to 180 gallons per minute• investment cast aluminum housing• anodized aluminum non-wear parts• heat treated stainless steel wear components• Delron® bushings eliminate metal-to-metal wear
Diesel Fuel Receiver
Diesel Fuel Swivels
• 2" male NPT• available in anodized aluminum or nickel-plated steel
• stainless steel male threaded base• stainless steel ball bearings
• hand black anodized female threaded nut• fluorosilicone sealing O-rings
• FR2 receiver allows replacement of wear components without draining the fuel tank
• O-ring sealed aluminum cap• cap has set screw attached vinyl coated cable lanyard
• FR2 receiver has an aluminum base with nickel-plated steel nose
Thread Size Description Part # Price/E
1½" male NPS x 1½" female NPT used with FN600 FN600S $343.75
Thread Size Description Part # Price/E
1½" male NPT x 1½" female NPT2" male NPT x 1½" female NPT
1½" female NPT x 1½" female NPT
standardstandarddouble
FNSFNS2FNSID
$343.75357.50398.75
Description Part # Price/E
dog latch mechanism with sealing plugball lock with sealing plug
sealing plug for FN600sealing plug for FN600BL
FN600FN600BLFN600B-PLUGFN600B
$2787.252629.75187.45187.45
one-piece bodyDescription Material Part # Price/E
one-piece receiver without capone-piece receiver with cap
one-piece receiver without capone-piece receiver with cap
cap for receiver
nickel-plated steelnickel-plated steel
anodized aluminumanodized aluminumanodized aluminum
FRSFRS-CFRAFRA-CFR-CAP
$371.25431.75371.25431.75123.75
two-piece bodyDescription Part # Price/E
two piece receiver with removable stainless sleeve without captwo piece receiver with removable stainless sleeve with cap
removable sleeve replacement for two piece receiver
FR-RSFR-RS-CFR-RS-R
$664.00695.65223.15
80 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
GFR-0
GFR-90
Flomax Diesel Fueling System
Flomax Fuel Vent Series
Diesel Fuel Gravity Fill Receiver
Size DescriptionAnodized Aluminum
Part # Price/E1-3/8"1-3/8"1-3/8"
1"1"1"
straight45°90°
straight45°90°
GFR-0GFR-45GFR-90GFR1-0GFR1-45GFR1-90
$494.95522.45522.45522.45549.95549.95
• used with the FN600 or FN600BL to convert to gravity fueling
• 2" male NPT• billet cap provides superior impact resistance• easily serviced all metal construction• rigid ball cage for positive seal• available with: • threaded outlet • half coupling • anti-vandalism mounting
Description Part # Price/E
with 5" tubewith 7" tubewith 9" tube
with 5" tube and threaded outlet
VTVT7VT9VTT
$453.70467.45481.20509.90
VTT
Flomax Service BoxNEW for2011!!
• Designed to enclose receivers for diesel fuel, hydraulic oil, transmission fluid and coolant reducing contamination and weather related problems.
• normally installed on heavy duty earth mover equipment and drill rigs
• 12 gauge steel construction with heavy duty hinges• painted white - Imron® Primer
Part # Price/E
FSB $1615.00
does not include receivers shown in photo
81DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
MaleThread
FemaleThread Description
Anodized AluminumNozzles
Part # Price/E
¾" NPT¾" NPT
---
---------
engine nozzle ball lockengine nozzle ball lock with plugengine nozzle plug
ENBLENBL-PENBL-PLUG
$618.70702.05104.50
Flomax Standard Series Connectors
Engine Oil (red)• universally fits all crankcase receivers, both R-series and
Standard series• incorporates 10 locking balls with a 40% deeper
engagement
The Flomax standard series connectors consist of four color-coded mating connectors. They have all-metal construction with stainless steel wear components and anodized aircraft grade aluminum non-wear components. Each has easily recognizable labeling and is fully compatible and interchangeable with industry standards.
• resistant to clogging with a greater ease of cleaning• smooth actuation• larger diameter pullback lanyard• bright red anodized aircraft grade aluminum
Coolant Fluid (teal)
MaleThread
FemaleThread Description
Anodized AluminumNozzles
Part # Price/E
½" NPT½" NPT
---
---------
coolant nozzle ball lockcoolant nozzle ball lock with plugcoolant nozzle plug
CNCN-PCN-PLUG
$412.50495.80104.50
• nickle-plated stainless steel nozzle nose and base• standard roll-pin locking mechanism
• ergonomically engineered pullbacks and caps• bright teal anodized aircraft grade aluminum
MaleThread
FemaleThread Description
Anodized AluminumReceivers
Part # Price/E
½" NPT½" NPT
---
---------
coolant receivercoolant receiver with capcoolant receiver cap
CR-SCR-CCR-CAP
$220.00303.35104.50
MaleThread
FemaleThread Description
Anodized AluminumReceivers
Part # Price/E
¾" NPT¾" NPT
---¾" JIC
¾" JIC
------------
---
engine receiverengine receiver with capengine receiver capengine receiver with JIC bulkhead baseengine receiver with JIC bulkhead base and cap
ERSERS-CERS-CAPERJ
ERJ-C
$261.25344.60104.50344.55
405.15
ERJ-C
82 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
Nozzles MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
---------
¾" NPT¾" NPT
---
hydraulic nozzlehydraulic nozzle with plughydraulic nozzle plug
HNHN-PHN-PLUG
$620.15702.05104.50
Flomax Standard Series Connectors
Hydraulic Oil (gold)• nickle-plated stainless steel wear components• 10 steel dog latching mechanism
The Flomax standard series connectors consist of four color-coded mating connectors. They have all-metal construction with stainless steel wear components and anodized aircraft grade aluminum non-wear components. Each has easily recognizable labeling and is fully compatible and interchangeable with industry standards.
• ergonomically engineered pullbacks and caps• bright gold anodized aircraft grade aluminum
Transmission Fluid (violet)
• nickle-plated stainless steel nose and base• 6 steel dog latching mechanism
• ergonomically engineered pullbacks and caps• bright violet anodized aircraft grade aluminum
Receivers MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
¾" NPT¾" NPT
---
---------
hydraulic receiverhydraulic receiver with caphydraulic receiver cap
HRHR-CHR-CAP
$500.45583.80104.50
Nozzles MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
½" NPT½" NPT
---
---------
transmission nozzletransmission nozzle with plugtransmission nozzle plug
TNTN-PTN-PLUG
$549.95633.30104.50
Receivers MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
---------
3/8" NPT3/8" NPT
---
transmission receivertransmission receiver with captransmission receiver cap
TRTR-CTR-CAP
$288.75372.10104.50
83DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
MaleThread
FemaleThread Description
Anodized AluminumNozzles
Part # Price/E
---------
¾" NPT¾" NPT
---
R-series engine nozzleR-series engine nozzle with plugR-series engine nozzle plug
R-ENR-EN-PR-EN-PLUG
$482.35564.55104.50
Flomax R Series Connectors
Engine Oil (red)• all metal construction• standard roll-pin locking mechanism
The Flomax R-series connectors are fully compatible and interchangeable with industry standards. They have all-metal construction using anodized aircraft grade aluminum non-wear components.
• ergonomically engineered pullbacks and caps• bright red anodized aircraft grade aluminum
Coolant (teal)
MaleThread
FemaleThread Description
Anodized AluminumReceivers
Part # Price/E
1.625-12 UN-2A1.625-12 UN-2A
---
1.312-12 UN-2B1.312-12 UN-2B
---
R-series engine receiverR-series engine receiver with capR-series engine receiver cap
R-ERR-ER-CR-ER-CAP
$206.25289.60104.50
MaleThread
FemaleThread Description
Anodized AluminumNozzles
Part # Price/E
---------
½" NPT½" NPT
---
R-series coolant nozzleR-series coolant nozzle with plugR-series coolant nozzle plug
R-CNR-CN-PR-CN-PLUG
$454.85537.05104.50
• all metal construction• standard roll-pin locking mechanism
• ergonomically engineered pullbacks and caps• bright teal anodized aircraft grade aluminum
MaleThread
FemaleThread Description
Anodized AluminumReceivers
Part # Price/E
1.187-12 UN-2A1.187-12 UN-2A
---
.875-14 UN-2B
.875-14 UN-2B---
R-series coolant receiverR-series coolant receiver with capR-series coolant receiver cap
R-CRR-CR-CR-CR-CAP
$165.00248.35104.50
84 DPL411877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDry
Disconnect
Nozzles MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
---------
1" NPT1" NPT
---
R-series hydraulic nozzleR-series hydraulic nozzle with plugR-series hydraulic nozzle plug
R-HNR-HN-PR-HN-PLUG
$530.70614.05104.50
Flomax R Series Connectors
Hydraulic Oil (gold)• all metal construction• standard roll-pin locking mechanism
The Flomax R-series connectors are fully compatible and interchangeable with industry standards. They have all-metal construction using anodized aircraft grade aluminum non-wear components.
• ergonomically engineered pullbacks and caps• bright gold anodized aircraft grade aluminum
Transmission Fluid (violet)
• all metal construction• standard roll-pin locking mechanism
• ergonomically engineered pullbacks and caps• bright violet anodized aircraft grade aluminum
Receivers MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
1.875-12 UN-2A1.875-12 UN-2A
---
1.625-12 UN-2B1.625-12 UN-2B
---
R-series hydraulic receiverR-series hydraulic receiver with capR-series hydraulic receiver cap
R-HRR-HR-CR-HR-CAP
$261.25344.60104.50
Nozzles MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
---------
¾" NPT¾" NPT
---
R-series transmission nozzleR-series transmission nozzle with plugR-series transmission nozzle plug
R-TNR-TN-PR-TN-PLUG
$426.25509.55104.50
Receivers MaleThread
FemaleThread Description
Anodized Aluminum
Part # Price/E
1.312-12 UN-2A1.312-12 UN-2A
---
1.062-12 UN-2B1.062-12 UN-2B
---
R-series transmission receiverR-series transmission receiver with capR-series transmission receiver cap
R-TRR-TR-CR-TR-CAP
$198.00281.35104.50
85DPL411 877.963.4966 • www.dixonvalve.com
Dry Disconnect Fittings
BDryDisconnect
Female NPTsize Description Anodized Aluminum NozzlesPart # Price/E¾" red nozzle with plug
gold nozzle with plugteal nozzle with plugviolet nozzle with plugnavy nozzle with plugcopper nozzle with plug
ENBL-PENBL-P2ENBL-P3ENBL-P4ENBL-P5ENBL-P6
$702.05702.05702.05702.05702.05702.05
• maximum flow rate of 45 GPM at 70 PSI• working pressure rating: 200 PSI
Consists of 6 nozzle and receiver sets that are color coded for quick identification of mating parts. Each color nozzle and receiver will only couple with their matching color component. This provides complete protection against cross contamination.
Flomax High Flow Series
• The standard mounting for the nozzle is a ¾" female NPT and for the receiver is a ¾" male NPT.
Male NPTsize Description Anodized Aluminum ReceiversPart # Price/E¾" red receiver with cap
gold receiver with capteal receiver with capviolet receiver with capnavy receiver with capcopper receiver with cap
ERS-CERS-C2ERS-C3ERS-C4ERS-C5ERS-C6
$344.60344.60344.60344.60344.60344.60
Female NPTsize Description Anodized Aluminum NozzlesPart # Price/E1" red nozzle with plug
gold nozzle with plugteal nozzle with plugviolet nozzle with plugnavy nozzle with plugcopper nozzle with plugblue/gray nozzle with plug
HFN-P1HFN-P2HFN-P3HFN-P4HFN-P5HFN-P6HFN-P7
$812.05812.05812.05812.05812.05812.05812.05
Each of the 7 nozzles and 7 receivers has the following performance:• The nozzle/receiver combination has a flow area equivalent
to a 1" schedule 80 pipe.• The fittings have a 500 PSI working pressure rating with
1500 PSI minimum burst pressure.• All wear parts are constructed of stainless steel for long life
and corrosion resistance.• All non-wear parts are constructed of colored anodized
aircraft grade aluminum for high strength, lightweight and corrosion resistance.
Consists of 7 nozzle and receiver sets that are color coded for quick identification of mating parts. Each color nozzle and receiver will only couple with their matching color component. This will provide complete protection against cross contamination.
• The standard mounting for the nozzle is a 1" female NPT and for the receiver is a 1" male NPT. The receivers also come with a 1" female NPT threaded base.
• The nozzle incorporates a "ball lock" mechanism to ensure smooth and reliable operation.
Physical Description:• nozzle length: 3.90" (99 mm)• receiver length: 3.44" (87 mm)• diameter: 2.50" (64 mm)• hex size: 2" (51 mm)• nozzle and receiver coupled length: 5.44" (138 mm)
Male NPTsize Description Anodized Aluminum ReceiversPart # Price/E1" red receiver with cap
gold receiver with capteal receiver with capviolet receiver with capnavy receiver with capcopper receiver with capblue/gray receiver with cap
HFR-C1HFR-C2HFR-C3HFR-C4HFR-C5HFR-C6HFR-C7
$509.55509.55509.55509.55509.55509.55509.55
Note: ERS series is available with JIC bulkhead base. Substitute 'J' for 'S'. Example: ERJ-C2
3/4" Series
1" Series