SAFETY KITwith safety group SFR
• 100% In accordance with the French Regulation (new regulation sanitary hot water temperature).
• Standard safety group = interchangeability with all groups market.
• Exclusive WATTS: fitting insulation dielectric in "cross" for connection to the sanitary expansionvessel.
SAFETY KIT
Re-order no. 66(5)-UK-12/09
The photographs, illustrations and descriptions contained in this brochure are given for information only. Watts Industries reserves the right to change the technical specifications or the design of these products without prior notice.
WATTS INDUSTRIES France1590 avenue d'Orange CS 10101 SORGUES 84275 VEDENE cedex - FRANCETel. +33 (0)4 90 33 28 28 - Fax +33 (0)4 90 33 28 29/39www.wattsindustries.comE-mail : [email protected]
Application:
Kit really full, ready to use, for hot water storage heater up to 10 kW. The safety kit installs directly on the inlet andoutlet of the hot water storage heater thanks to the 2 demountable dielectric insulating connections (R.I.D.).
Advantages:
• Security : No risk of scalding, the thermostatic mixing valve RLTM2 makes the utilisation secure by lowering thetemperature (for France new regulation applicable since 15/12/2006 - decree dated 30/11/2005)** Toilette hot water: temperature ≤ 50°C.
• Comfort : At the outlet of the hot water storage heater the pipes distributing hot water are only filled with mixedwater. An important stock of hot water is so available in the hot water storage heater.The pipes and taps are highly protected against scale.
• Hygiene : The hot water is stocked in the hot water storage heater, its temperature is 60°C min. in the night, at thistemperature the main bacteria which are present in the water (Escherichia coli, Legionella...) are killed or in lethargy.
• Interchangeability : insured for troubleshooting through the safety group connection with standard inter axis sizes.
Characteristics:
• "Cross" dielectric insulating connection (R.I.D.) WATTS exclusivity.• Safety group SFR 3/4” NF.• Thermostatic mixing valve with check-valves NF.
installation options:
- Flexible of connectionThe addition of a flexible F1/2” (side dielectric cross)and F3/4" (side expansion vessel) allows the installa-tion of a sanitary expansion vessel. The sanitaryexpansion vessel absorbs expansion of water duringthe heat and prevents the flow of the safety groupart. num.: 92504N.
- Pressure reducing valve Redufix M/F free nut art. num.: 82210.
- Special Tee of derivation 3/4” allow a uptake of thehot water outlet to the kitchenart. num.: 92505.
Flexible of connectionart. num.: 92504N
Pressure reducingvalve Redufixart. num.: 82210
Special Tee ofderivationart. num.: 92505
fits between hotwater RID and theRLTM2
Sanitaryflexible
F3/4”
M/F free nut 3/4”F1/2”
Composition :
descriptionDielectric insulating connection “cross-stapped”F3/4” / M3/4” and 2 x M1/2”Thermostatic mixing valve RLTM2M/M/M 3/4”Sanitary stainless steel flexible hoseF3/4”, F1/2”, length 20 cmDielectric insulating connectionF3/4” / F free nut 3/4”Safety group SFR or SFR stainless steel NF F3/4”Trap funnel kit NF with deflector
➋
➌
➏
➍
➎➋
➌
➏
➍
➎
➊
➊
designation art. num.Safety Kit with SFR 54604Safety Kit with SFR stainless steel 54606
