Safety You Can Count OnDräger Chemical Protective Suits
D-355
2-2010
INDUSTRYMARITIMEFIREFIGHTING
02 |
Safety can be planned
Working with hazardous goods is highly stressful for people and materials alike.For more than 50 years, Dräger has made sure that the right equipment is availableto you whenever and wherever you need it.
THE RIGHT PROTECTION FOR ANY HAZARD
Whether taking pre entry measurements, transferring liquids,or responding to emergencies: Dräger offers a large rangeof chemical protective suits – tailor-made for a large varietyof application areas. So that you get the exact protectionyou need for your specific use.
FIVE QUESTIONS TO FIND THE RIGHT PROTECTIVE SUIT:
1. To which hazardous substances are you exposedduring your work?– If you know the hazardous substance, you can take tangible measures to protect yourself
– If this is not the case, always assume the worst casescenario and select the highest level of protection
2. Do you have to wear a breathing apparatus duringyour work?– If a breathing apparatus is not required, a simple overall is sufficient
– If you work with a filter apparatus, it is best to use a suit equipped with integrated full-face mask or facial cuff
– If you need a compressed air breathing apparatus,make sure the equipment is comfortable to weareither over or under your protective suit
3. What is your work environment like?– For example, a traffic accident requires you to reach inbetween or handle sharp-edged objects. A protective
suit with a higher mechanical strength such as areusable model is recommended when your workenvironment is unpredictable
– If damage is unlikely, you can also use a limited-usesuit
– When working in confined spaces, such as tanks withmanholes, it is best to select a close fitting suit andwear the compressed air apparatus over the suit. Thisway you can strip off the SCBA when passing throughespecially narrow passages
4. How well can the pollution caused by the hazardoussubstance be removed again (decontamination)?– If the hazardous substance is difficult to remove fromsurfaces, you should wear a protective suit with thebreathing apparatus worn on the inside of the suit
5. What are the associated risks of working with thehazardous substances?– If it is a very cold hazardous substance such as liquefiedgas, the material of the suit must not become brittleor break when being exposed to the cold
– If the hazardous substance is flammable at ambienttemperatures, the protective suit must be flame-resistant
– If a risk of explosion exists in the area where the hazardous substance is leaking, the suit must have thecorresponding electrostatic properties
– If the hazardous substance is a toxic gas, only a gas-tight suit should be used, never a splash suit
SAFETY CAN BE PLANNED
| 03
2
3
5
4
6
7
8
9
11
12
10
1
Main Approvals
EN 943-2:2002 Type 1a (ET); SOLAS (pending)
EN 943-2:2002 Type 1b (ET); SOLAS; etc.
EN 943-2:2002 Type 1a (ET); NFPA 1994-2007, Class 2; SOLAS (pending)
EN 943-2:2002 Type 1b (ET); SOLAS; etc.
EN 943-1:2002 Type 1a; SOLAS
EN 943-1:2002 Type 1b; SOLAS; etc.
EN 943-1:2002 Type 1b; SOLAS; etc.
EN 14605 Type 3 & 4; SOLAS; etc.
EN 1511 Type 3; EN 1512 Type 4; etc.
EN 1511 Type 3; EN 1512 Type 4;etc.
EN 466 Type 3; etc.
EN 465 Type 4; etc.
2
3
5
4
6
7
8
9
11
12
10
1
HOW DO YOU FIND THE RIGHT SUIT?
SUBSTANCE IS KNOWN SUBSTANCE AND SITUATION ARE UNKNOWN AND SITUATION IS (E.G. FIRST SITE EVALUATION) OR SPECIAL HAZARDS UNDER CONTROL ARE TO BE EXPECTED
Dräger Breathing apparatus Liquids/ Known Unknown Mechanical Liquefied Working in Arcthroughs/
protective suit Solids gases* gases* stress gases explosive Breakthroughs
zones
CPS 7900 Inside: SCBA • • • • • • •WorkMaster pro-ET Outside: F / SCBA • • • •CPS 5900 Inside: SCBA • • •CPS 5800 Outside: F / SCBA • • •TeamMaster Umex Inside: SCBA • • •WorkMaster Umex Outside: F / SCBA • • •WorkMaster Industry Outside: F / SCBA • •SPC 3800 Outside: F / SCBA •Protec Plus TF Outside: WO / F / SCBA •Protec Plus TC Outside: WO / F / SCBA •Workstar PVC Outside: WO / F / SCBA •Workstar Flexothane Outside: WO / F / SCBA •*See VOICE (hazardous substances database) for resistance data at www.draeger.com/voice;F = Filter, SCBA= Self Contained Breathing Apparatus, WO = No Breathing Apparatus; = New products, = Existing products
1 2 3 4 5 6 7 8 9 10 11 12
04 |
Made for High Demands Chemical protective suits for industry
Handling hazardous substances is required in refineries, on drilling platforms,or in industrial plants. Dräger provides you with the right tools to master anyrisk. Our range of protective suits covers almost any situation and is customizedto meet the needs and requirements of various environments.
CHEMICAL PROTECTIVE SUITS FOR INDUSTRY
D-140
-2010
| 05
Dräger TeamMaster UMEX– Gastight protection from cryogenic hazardous substances and acids andalkaline substances in low concentrations
– UMEX material: the highest degree ofwearing comfort with very goodmechanical strength and excellent flexibility
– Ideally suited for handling cryogenicmedia and for working in cold environments
Dräger WorkMaster UMEX– Gastight even with cryogenic hazardoussubstances and acids and alkaline substances in low concentrations
– Material remains flexible even at verylow temperatures
– Fits close to the body: Unrestrictedmaneuverability (advantage when working in restricted spaces)
– Permanently integrated mask or integrated facial cuff: (can be combined with different masks)
Dräger WorkMaster Industry– Safe working even in the most difficultsituations
– Gastight and especially resistant toacids and alkaline solutions
– SYMEX material: long lasting, highabrasion and chemical resistance
– Easy to don and doff: close fittingdesign, soft materials, and vertical zipper on back
Dräger SPC 3800– Optimal for use with liquid chemicals– No additional sealing required: permanently attached gloves, integrated socks with drip cuffs andflexible facial cuff
– Disposable protection for inspections,maintenance, and decontaminationactivities
Dräger Protec Plus TF– Light, impermeable to liquids, suitablefor less hazardous tasks
– Protection against very fine dusts andpowders
– Protection against many concentratedinorganic acids and alkaline solutionsas well as a wide variety of organicchemicals
Dräger Protec Plus TC– Light, impermeable to liquids, suitablefor less hazardous tasks
– Protection against ultra fine dusts andpowders
– High barrier to many inorganic acidsand alkaline solutions as well as water-based saline solutions
Dräger WorkStar Flexothane– High degree of wearing comfort: lightmaterial permeable by water vapor
– Ideal for handling lubricants, oils, crudeoil, machine oils, and petroleum
– Material remains flexible even at verylow temperatures
7 6 8
10
59 12
06 |
On Board SafetyChemical protective suits for maritime applications
Whether cleaning work or loading and unloading or in case of a leakage: If you run the risk on board ship of coming in contact with solid, liquid, or gaseous hazardous substances, Dräger gives you the security of the right equipment approved according to SOLAS to keep you safe.
CHEMICAL PROTECTIVE SUITS FOR MARITIME APPLICATIONS
D-139
-2010
| 07
Dräger SPC 3800– Optimal for use with liquid chemicals– No additional sealing required: permanently attached gloves, integratedsocks with drip cuffs and flexible facial cuff
– Disposable protection for inspections,maintenance, and decontaminationactivities
Dräger CPS 5800– Perfect gastight disposable protectionfor less hazardous applications
– Proven WorkMaster pro ET design withflexible facial cuff
– Protects from a variety of industrialchemicals
– Optimal protection for emergencies aswell as maintenance and repair work
– Limited use: resistant to mechanicalimpacts and flames (not the same protection level as the WorkMaster pro ET)
Dräger WorkMaster pro ET– Reusable, gas-tight protective suit; thebreathing apparatus is worn over the suit
– Highest possible protection for thewearer
– High-grade HIMEX material: high chemical and mechanical resistance, excellent resistance toshooting flames
– Permanently integrated mask or integrated facial cuff: (can be combined with different masks)
– Highest protection in CSE areas– Available in blue and orange
28 4
08 |
Trust in performanceChemical protective suits for firefighting applications
Runs and operations involving hazardous goods require equipment you canrely on. Dräger provides you with the protection you need: from splash-protectionoveralls for decontamination to gastight protective suits for working in explosiveatmospheres.
CHEMICAL PROTECTIVE SUITS FOR FIREFIGHTING APPLICATIONS
D-138
-2010
| 09
Dräger CPS 7900– Tailor-made for use under extreme conditions
– Gastight, reusable protective suit– Excellent protection from industrialchemicals, chemical warfare agents and other toxic substances
– Innovative material: Suitable for use withcryogenic substances down to - 80°Cand in explosive zones
– Flame retardant and self-extinguishing
Dräger CPS 5900– Gastight limited use protective suit– Specifically designed for less hazardoustasks such as pre entry measurements or transferring substances without explosion hazard
– High protection against a variety ofindustrial chemicals and chemical warfare agents
– Limited use: resistance to mechanicalimpacts and flames not as high as thatof the CPS 7900
Dräger WorkStar PVC– Reusable protective suit– Solid protection from liquids forrougher jobs such as cleaning with highpressure equipment or tank cleaning
– Robust material: offers protection whenusing cleaning agents, low concentrationsof acids and base, and inorganic salts
1 11 3
10 |
Because testing makes live safer Dräger family of test equipment
Reliable devices for personal protective equipment are thebasic requirement for a powerful fire fighting service. Withthe Dräger Quaestor 7000 a test instrument is availablethat, as flagship of the versatile Dräger test instrumentportfolio is indispensable for every modern respiratory protection workshop with high test volumes. The fully automated and computer-controlled test instrument providesthe complete spectrum of static and dynamic tests for respiratory protection products. Maximum comfort isensured while making your responsible task easier.
The new Dräger Quaestor 5000 or the Dräger Testor productfamily is available for static tests.
D-693
0-2010
After use is
before use
ST-99
49-200
6D-656
3-2010_S
D-656
1-2010_S
TEST EQUIPMENT UND WORKSHOP SYSTEM
Dräger Quaestor 7000Dräger Quaestor 5000
Dräger Testor 3100
| 11
The personal protective equipment is your life insurancewhen battling fire, smoke, heat, and chemicals. Suchequipment must be ready for use back at the right locationas quickly as possible. Dräger offers workshop systemsthat are customized to meet your individual needs andrequirements, accelerate work flows, and are easy on your protective equipment when properly maintained andrepaired. The special Dräger washing and drying systemsfeature integrated cleaning, disinfection, and drying functions as well as the option to repair, check, and storethe protective suits and overalls.
ST-7534
-200
8
Ready When It CountsDräger workshop system
90 46 873 | 05.10-1 | M
arketing Com
munications | G
M | PR | LE | Printed
in Germany | C
hlorine-free – environ
mentally com
patib
le | Sub
ject to mod
ificatio
ns | ©
2010 Dräge
r Safety AG & C
o. KGaAHEADQUARTERS
Dräger Safety AG & Co. KGaARevalstrasse 123560 Lübeck, Germany
www.draeger.com
SPAINDraeger Safety Hispania S.A.Calle Xaudaró 528034 MadridTel +34 91 728 34 00Fax +34 91 729 48 99
UNITED KINGDOMDraeger Safety UK Ltd.Blyth Riverside Business ParkBlyth, Northumberland NE24 4RGTel +44 1670 352-891Fax +44 1670 356-266
USADraeger Safety, Inc.101 Technology DrivePittsburgh, PA 15275Tel +1 412 787 83 83Fax +1 412 787 22 07
FRANCEDräger Safety France SAS3c route de la Fédération, BP 8014167025 Strasbourg Cedex 1Tel +33 3 88 40 59 29Fax +33 3 88 40 76 67
MEXICODraeger Safety S.A. de C.V.Av. Peñuelas No. 5Bodega No. 37Fraccionamiento Industrial San PedritoQuerétaro, Qro MéxicoTel +52 442 246-1113Fax +52 442 246-1114
NETHERLANDSDräger Safety Nederland B.V.Edisonstraat 532700 AH ZoetermeerTel +31 79 344 46 66Fax +31 79 344 47 90
REP. OF SOUTH AFRICADräger South Africa (Pty) Ltd.P.O.Box 68601Bryanston 2021Tel +27 11 465 99 59Fax +27 11 465 69 53
SINGAPOREDraeger Safety Asia Pte Ltd67 Ayer Rajah Crescent #06-03Singapore 139950Tel +65 68 72 92 88Fax +65 65 12 19 08
SUBSIDIARIES
AUSTRALIADraeger Safety Pacific Pty. Ltd.Axxess Corporate ParkUnit 99, 45 Gilby RoadMt. Waverley. Vic 3149Tel +61 3 92 65 50 00Fax +61 3 92 65 50 95
CANADADraeger Canada Ltd.7555 Danbro CrescentMississauga, Ontario L5N 6P9Tel +1 905 821 89 88Fax +1 905 821 25 65
P. R. CHINABeijing Fortune Draeger SafetyEquipment Co., Ltd.A22 Yu An Rd, B Area, Tianzhu Airport Industrial Zone,Shunyi District, Beijing 101300Tel +86 10 80 49 80 00Fax +86 10 80 49 80 05