Safe@workOccupational Health & Safety requirement for Work Experience

1. Google ‘Safe@work’

2. Click this website

3. This is the correct site

4. Read the information and select the General Module (or Review Module is you completed the General Module more than 12 months before the date of Work Experience.

Read thisClick Here

Click Here

5. Read through all 17 Modules

6. Select ‘Self Assessment Tests’

7. You should be on this page

8. Enter your details, select ‘General’ then click ‘Begin Test’.

9. Complete the test

10. When you have successfully passed the test you will see a certificate.

11. Right click on the certificate and select ‘Convert to Adobe PDF’. Then save the certificate in a safe place.

12. You should end up with your certificate saved as an Adobe PDF file which look like this. Print the certificate and give it to your LA teacher, hand it in a Student Services or give it directly to Miss Sizeland.

13. Now you must complete the relevant Industry Module. Select ‘Industry Modules’ and repeat the process.

When you have a certificate for:

* General Module (or Review Module)* 1 Industry Module based on the industry you will be doing work experience in

You are FINISHED!

Well Done