SAFR LED SERIESHazardous Location LED Luminaire
• Class I, Division 2, Groups A, B, C & D
• Class II, Division 1 & 2, Groups E, F & G
• Class III
• Class I, Zone 2, Groups IIA, IIB & IIC
• UL 8750 LED Safety
• UL 844 Hazadardous Locations
• UL 1598 Wet Locations
• UL 1598A Marine Outside Type
• NEMA 3R & 4X
• IP66
• CUL
• ABS Type Approved
• Restricted Breathing
• AEx nR II
• Tested to LM 79 & LM 80
• Enclosed & Gasketed
• US Patent # D637,339S
S A FR LE D
177
LED
178
SAFR LED SERIESHazardous Location LED Luminaire
Large hinge permits fixture to open for “hands free” wiring. Also allows better heat dissipation of internal components.
All external hardware is stainless steel. Stainless steel inserts are available as an option.
All exterior surfaces are covered with corrosion and chemical resistant baked epoxy.
Housing and outlet boxes are high strength, corrosion resistant copper-free cast aluminum alloy.
Superior heat resistant silicone o-ring gasket makes fixture suit-able for installation indooors or outdoors. Other materials available.
Available with deep prismatic, clear low profile or frosted low profile globes.
Suitable for installation on marine environments where equipment is subject to salt water spray, either indoor or outdoor.
• UL 844 Hazardous Locations • UL 8750 LED Safety• UL 1598A Marine Outdoor
• Enclosed and Gasketed• Suitable for wet locations• Suitable for hose down applications
RIG-A-LITE
GLOBE & GUARD LC = Low Profile Clear Globe Only LCG = Low Profile Clear Globe & Guard LF = Low Profile Frosted Globe OnlyLFG = Low Profile Frosted Globe & Guard T5 = Type V (Symmetric) Closed Bottom Glass RefractorT5G = Type V (Symmetric) Closed Bottom Glass Refractor & Guard
Catalog Number Logic
1 BASIC SERIES SAFR Hazardous Location LEDClass I, Division 2, Groups A, B, C & DClass II, Division 1 & 2, Groups E, F & GClass III Simultaneous PresenceClass I, Zone 2, Groups IIA, IIB & IICEnclosed and GasketedWet LocationsNEMA 3R, 4X; IP66 UL 1598, UL1598A, UL844 & UL8750 CUL ABS Type ApprovedRestricted Breathing (Annual Testing Not Required) AEx nR II
LAMP CURRENT/LAMP WATTAGE 09 = 75 Watt 11 = 98 Watt
LAMP TYPE L = LED DRIVER VOLTAGE U = 120 to 277V 50/60 HZ N = 347/480V 60 HZ
2
3
5
4
SAFR-1 2 3 4 5 6 7
6 MOUNTING STYLEP = 3/4" Pendant Mount P1 = 1" Pendant MountC = 3/4" Ceiling Mount C1 = 1" Ceiling MountW = 3/4" Wall MountW1 = 1" Wall MountS = 1-1/4" 25° Stanchion MountS1 = 1-1/2" 25° Stanchion Mount L = 1-1/4” 90° Stanchion Mount L1 = 1-1/2” 90° Stanchion Mount K = 3/4" Cone Top K1 = 1" Cone Top
OPTIONS1
SS = Stainless Steel Inserts (304) FB1 = Single Fuse Block2,3
FB2 = Double Fuse Block2,3
TB = Terminal Block SC = Safety Cable
7
Refer to Certification Guide to determine suitability of individual fixture.
Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts.
1 Consult factory for pricing 2 Not available unless incoming voltage is specified.
When installed, one fuse block is provided for 120, 277V and two fuse blocks are provided for 208, 220, 240V. Fuse not included. Not available on 347V or 480V
3 Fuse option not available for marine listed fixtures.Certification Guide
MODELAMBIENT
°C
Class I, Div.2 CLASS Il & lllSimultaneous
PresenceUL 1598A OUTDOOR
Class I, Zone 2
AEx nR II CUL
SUPPLY WIRE
SUITABLE TEMP °C
Groups A,B,C & D GROUPS
SAFR09L 40 T4A E,F,G T6 T3C YES T4 YES 90SAFR09L 55 T4A E,F,G T6 T3C YES T4 YES 105SAFR11L 40 T3A E,F,G T6 T3A YES T3 YES 90SAFR11L 55 T3A E,F,G T6 T3A YES T3 YES 105
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
SAFR SeriesLED
179
Refer to Certification Guide to determine suitability of individual fixture.
Mounting StyleConduit
Size(in.)
Catalog Number120/208/240/277V
Shipping Weight(lbs.)
CONSISTS OF
BallastHousing
OutletBox Refractor Guard
RIGID PENDANT 3/4 SAFR09-L-U-T5-G-P 21.2 SAFR09LU SMP SRT25GL SXP25WG 1 SAFR09-L-U-T5-G-P1 21.2 SAFR09LU SMP1 SRT25GL SXP25WG
CEILING MOUNT
3/4 SAFR09-L-U-T5-G-C 22.0 SAFR09LU SMC SRT25GL SXP25WG
3/4 SAFR09-L-U-T5-G-C1 22.0 SAFR09LU SMC1 SRT25GL SXP25WG
75 Watt Threaded Refractor and Guard
WALL MOUNT 3/4 SAFR09-L-U-T5-G-W 21.2 SAFR09LU SMW SRT25GL SXP25WG1 SAFR09-L-U-T5-G-W1 21.2 SAFR09LU SMW1 SRT25GL SXP25WG
25° STANCHION MOUNT 1-1/4 SAFR09-L-U-T5-G-S 21.2 SAFR09LU SMS SRT25GL SXP25WG1-1/2 SAFR09-L-U-T5-G-S1 21.2 SAFR09LU SMS1 SRT25GL SXP25WG
90° STANCHION MOUNT 1-1/4 SAFR09-L-U-T5-G-L 22.0 SAFR09LU SML SRT25GL SXP25WG1-1/2 SAFR09-L-U-T5-G-L1 22.0 SAFR09LU SML1 SRT25GL SXP25WG
LEDLED
SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
180 RIG-A-LITE
75 Watt Low Profile Clear Globe and Guard
Mounting StyleConduit
Size(in.)
Catalog Number120/208/240/277V
Shipping Weight(lbs.)
CONSISTS OF
BallastHousing
OutletBox Globe Guard
RIGID PENDANT 3/4 SAFR09-L-U-LCG-P 17.2 SAFR09LU SMP SGL10T SXP10WG1 SAFR09-L-U-LCG-P1 17.2 SAFR09LU SMP1 SGL10T SXP10WG
CEILING MOUNT 3/4 SAFR09-L-U-LCG-C 18.0 SAFR09LU SMC SGL10T SXP10WG1 SAFR09-L-U-LCG-C1 18.0 SAFR09LU SMC1 SGL10T SXP10WG
WALL MOUNT 3/4 SAFR09-L-U-LCG-W 17.2 SAFR09LU SMW SGL10T SXP10WG1 SAFR09-L-U-LCG-W1 17.2 SAFR09LU SMW1 SGL10T SXP10WG
25° STANCHION MOUNT 1-1/4 SAFR09-L-U-LCG-S 17.2 SAFR09LU SMS SGL10T SXP10WG1-1/2 SAFR09-L-U-LCG-S1 17.2 SAFR09LU SMS1 SGL10T SXP10WG
90° STANCHION MOUNT 1-1/4 SAFR09-L-U-LCG-L 18.0 SAFR09LU SML SGL10T SXP10WG1-1/2 SAFR09-L-U-LCG-L1 18.0 SAFR09LU SML1 SGL10T SXP10WG
Refer to Certification Guide to determine suitability of individual fixture.
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
SAFR SeriesLED
181
LED
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
Mounting StyleConduit
Size(in.)
Catalog Number
120/208/240/277V
Shipping Weight(lbs.)
CONSISTS OF
BallastHousing
OutletBox Globe Guard
RIGID PENDANT 3/4 SAFR09-L-U-LFG-P 17.2 SAFR09LU SMP SFGL10T SXP10WG1 SAFR09-L-U-LFG-P1 17.2 SAFR09LU SMP1 SFGL10T SXP10WG
CEILING MOUNT 3/4 SAFR09-L-U-LFG-C 18.0 SAFR09LU SMC SFGL10T SXP10WG1 SAFR09-L-U-LFG-C1 18.0 SAFR09LU SMC1 SFGL10T SXP10WG
WALL MOUNT 3/4 SAFR09-L-U-LFG-W 17.2 SAFR09LU SMW SFGL10T SXP10WG1 SAFR09-L-U-LFG-W1 17.2 SAFR09LU SMW1 SFGL10T SXP10WG
25° STANCHION MOUNT 1-1/4 SAFR09-L-U-LFG-S 17.2 SAFR09LU SMS SFGL10T SXP10WG1-1/2 SAFR09-L-U-LFG-S1 17.2 SAFR09LU SMS1 SFGL10T SXP10WG
90° STANCHION MOUNT 1-1/4 SAFR09-L-U-LFG-L 18.0 SAFR09LU SML SFGL10T SXP10WG1-1/2 SAFR09-L-U-LFG-L1 18.0 SAFR09LU SML1 SFGL10T SXP10WG
75 Watt Low Profile Frosted Globe and Guard
Refer to Certification Guide to determine suitability of individual fixture.
LEDLED
SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
182 RIG-A-LITE
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
SAFR SeriesLED
183
LED
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
Candlepower Distribution Deg Parl. 22.5 45 67.5 Norm 0 1515 1515 1515 1515 1515 15 1659 1629 1683 1645 1608 25 1549 1478 1527 1580 1609 35 1099 1193 1223 1229 1100 45 858 851 858 865 863 55 642 666 709 680 663 65 340 328 340 348 307 75 181 178 179 173 171 85 69 73 72 71 68 90 37 39 39 37 36
SAFR09LULCGXX
Candlepower Distribution Deg Parl. 22.5 45 67.5 Norm 0 1267 1267 1267 1267 1267 15 1174 1167 1163 1161 1159 25 1053 1049 1034 1028 1023 35 880 881 887 885 876 45 722 716 718 713 710 55 585 587 582 575 583 65 420 415 417 412 406 75 266 260 260 258 251 85 135 133 132 132 130 90 94 94 94 94 94
SAFR09LULFGXX
Candlepower Distribution Deg Parl. 22.5 45 67.5 Norm 0 480 480 480 480 480 15 469 471 469 479 471 25 468 470 469 474 471 35 446 452 451 455 452 45 437 435 432 433 431 55 350 346 345 341 340 65 282 279 283 282 285 75 259 258 258 261 263 85 164 166 165 163 167 90 120 121 120 119 122
Total Lumens 2489Input Power
(watts)75.1
Efficacy (Lumens/Watt)
33.1
CRI 73CCT 5658
Total Lumens 4004Input Power
(watts)74.9
Efficacy (Lumens/Watt)
52.8
CRI 73CCT 5769
Total Lumens 3607Input Power
(watts)74.9
Efficacy (Lumens/Watt)
47.6
CRI 72CCT 5658
SAFR09LUT5GXX
WALL MOUNT 3/4 SAFR11-L-U-T5-G-W 21.2 SAFR11LU SMW SRT25GL SXP25WG1 SAFR11-L-U-T5-G-W1 21.2 SAFR11LU SMW1 SRT25GL SXP25WG
25° STANCHION MOUNT 1-1/4 SAFR11-L-U-T5-G-S 21.2 SAFR11LU SMS SRT25GL SXP25WG1-1/2 SAFR11-L-U-T5-G-S1 21.2 SAFR11LU SMS1 SRT25GL SXP25WG
90° STANCHION MOUNT 1-1/4 SAFR11-L-U-T5-G-L 22.0 SAFR11LU SML SRT25GL SXP25WG1-1/2 SAFR11-L-U-T5-G-L1 22.0 SAFR11LU SML1 SRT25GL SXP25WG
Mounting StyleConduit
Size(in.)
Catalog Number*120/208/240/277V
Shipping Weight(lbs.)
CONSISTS OF
BallastHousing
OutletBox Refractor Guard
RIGID PENDANT 3/4 SAFR11-L-U-T5-G-P 21.7 SAFR11LU SMP SRT25GL SXP25WG 1 SAFR11-L-U-T5-G-P1 21.7 SAFR11LU SMP1 SRT25GL SXP25WG
CEILING MOUNT
3/4 SAFR11-L-U-T5-G-C 22.5 SAFR11LU SMC SRT25GL SXP25WG
3/4 SAFR11-L-U-T5-G-C1 22.5 SAFR11LU SMC1 SRT25GL SXP25WG
98 Watt Threaded Refractor and Guard
Refer to Certification Guide to determine suitability of individual fixture. * Catalog Nos. shown are for fixtures with IES Type V closed bottom glass refractors, for other type refractors, refer to Catalog Number Logic.
LEDLED
SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
184 RIG-A-LITE
Mounting StyleConduit
Size(in.)
Catalog Number120/208/240/277V
Shipping Weight(lbs.)
CONSISTS OF
BallastHousing
OutletBox Globe Guard
RIGID PENDANT 3/4 SAFR11-L-U-LCG-P 17.2 SAFR11LU SMP SGL10T SXP10WG1 SAFR11-L-U-LCG-P1 17.2 SAFR11LU SMP1 SGL10T SXP10WG
CEILING MOUNT 3/4 SAFR11-L-U-LCG-C 18.0 SAFR11LU SMC SGL10T SXP10WG1 SAFR11-L-U-LCG-C1 18.0 SAFR11LU SMC1 SGL10T SXP10WG
WALL MOUNT 3/4 SAFR11-L-U-LCG-W 17.2 SAFR11LU SMW SGL10T SXP10WG1 SAFR11-L-U-LCG-W1 17.2 SAFR11LU SMW1 SGL10T SXP10WG
25° STANCHION MOUNT 1-1/4 SAFR11-L-U-LCG-S 17.2 SAFR11LU SMS SGL10T SXP10WG1-1/2 SAFR11-L-U-LCG-S1 17.2 SAFR11LU SMS1 SGL10T SXP10WG
90° STANCHION MOUNT 1-1/4 SAFR11-L-U-LCG-L 18.0 SAFR11LU SML SGL10T SXP10WG1-1/2 SAFR11-L-U-LCG-L1 18.0 SAFR11LU SML1 SGL10T SXP10WG
Refer to Certification Guide to determine suitability of individual fixture.
98 Watt Low Profile Clear Globe and Guard
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
SAFR SeriesLED
185
LED
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
WALL MOUNT 3/4 SAFR11-L-U-LFG-W 17.2 SAFR11LU SMW SGL10T SXP10WG1 SAFR11-L-U-LFG-W1 17.2 SAFR11LU SMW1 SGL10T SXP10WG
25° STANCHION MOUNT 1-1/4 SAFR11-L-U-LFG-S 17.2 SAFR11LU SMS SGL10T SXP10WG1-1/2 SAFR11-L-U-LFG-S1 17.2 SAFR11LU SMS1 SGL10T SXP10WG
90° STANCHION MOUNT 1-1/4 SAFR11-L-U-LFG-L 18.0 SAFR11LU SML SGL10T SXP10WG1-1/2 SAFR11-L-U-LFG-L1 18.0 SAFR11LU SML1 SGL10T SXP10WG
Refer to Certification Guide to determine suitability of individual fixture.
98 Watt Low Profile Frosted Globe and Guard
Mounting StyleConduit
Size(in.)
Catalog Number120/208/240/277V
Shipping Weight(lbs.)
CONSISTS OF
BallastHousing
OutletBox Globe Guard
RIGID PENDANT 3/4 SAFR11-L-U-LFG-P 17.2 SAFR11LU SMP SGL10T SXP10WG1 SAFR11-L-U-LFG-P1 17.2 SAFR11LU SMP1 SGL10T SXP10WG
CEILING MOUNT 3/4 SAFR11-L-U-LFG-C 18.0 SAFR11LU SMC SGL10T SXP10WG1 SAFR11-L-U-LFG-C1 18.0 SAFR11LU SMC1 SGL10T SXP10WG
LEDLED
SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
186 RIG-A-LITE
Candlepower Distribution Deg Parl. 22.5 45 67.5 Norm 0 987 987 987 987 987 15 2642 2842 2756 2732 2925 25 2769 2706 2795 2382 2956 35 2532 1950 2120 2430 1916 45 2308 2260 2352 2205 1971 55 1544 996 1082 1509 1043 65 458 439 427 534 456 75 233 218 191 227 177 85 117 76 83 92 67 90 69 47 51 57 49
Candlepower Distribution Deg Parl. 22.5 45 67.5 Norm 0 1971 1971 1971 1971 1971 15 2073 2069 2065 2064 2066 25 1953 1952 1942 1933 1952 35 1660 1667 1667 1679 1671 45 1393 1374 1376 1403 1383 55 1015 1002 1026 1051 1023 65 678 673 695 694 689 75 413 405 409 412 405 85 227 224 225 225 222 90 170 168 168 167 166
Candlepower Distribution Deg Parl. 22.5 45 67.5 Norm 0 947 947 947 947 947 15 1168 1153 1170 1146 1138 25 1123 1119 1150 1138 1148 35 1058 1041 1054 1033 1045 45 1044 1055 1023 1016 1032 55 783 771 763 751 772 65 651 655 641 647 657 75 537 534 528 533 534 85 418 410 407 404 396 90 337 331 327 328 322
SAFR11LUT5GXX
SAFR11LULCGXX
SAFR11LULFGXX
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
SAFR SeriesLED
187
LED
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
Total Lumens 5866Input Power
(watts)98.5
Efficacy (Lumens/Watt)
59.7
CRI 69CCT 5944
Total Lumens 7177Input Power
(watts)98.4
Efficacy (Lumens/Watt)
73.1
CRI 71CCT 6212
Total Lumens 6470Input Power
(watts)98.3
Efficacy (Lumens/Watt)
65.9
CRI 71CCT 6084
Refer to Certification Guide to determine suitability of individual fixture.
LEDLED
SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
188 RIG-A-LITE
Refer to Certification Guide to determine suitability of individual fixture.
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
SAFR SeriesLED
189
LED
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
Accessories
Refer to Certification Guide to determine suitability of individual fixture.
Conduit Shipping Catalog Hub Weight Outlet Boxes No. Size (In.) (Lbs.)
Rigid Pendant
Ceiling Mount
Wall Mount
Stanchion Mount (25°)
Stanchion Mount (90°)
Cone Mount
SMP 3/4 3.3
SMP1 1 3.3
SMC 3/4 4.1
SMC1 3/4 4.1
SMK 3/4 14.5
SMK1 1 14.5
SMW 3/4 7.8
SMW1 1 7.8
SMS 3/4 5.9
SMS1 1 5.9
SML 3/4 5.9
SML1 1 5.9
LEDLED
SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
190
.19
Shipping Catalog Weight Photo Cell Kit* No. Description (Lbs.)
SPH25-120
Automatic on-offswitch atpredeterminedlight levels.120 volt only.
REQUIRESFIELDINSTALLATION.
* Not Suitable for hazardous locations.
HLP-120
HLP-208-277
Hazardous Shipping Location Catalog Weight Photo Cell Kit* No. Description (Lbs.)
.25
.25
Automatic on-offswitch atpredeterminedlight levels.(120 volt only)
REQUIRESFIELDINSTALLATION.
RIG-A-LITE
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CSA Certified
SAFR SeriesLED
103
LED
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CSA Certified
Refer to Certification Guide to determine suitability of individual fixture.
1.50
1.00
Stainless Steel Wire Guard for Type 1, 3 & 5 refractors
Stainless Steel Wire Guard for Low Profile Clear and Frosted Globes
.06
Open fuse block kit- 600 volt AC maximum.
HLP-120
HLP-208-277
Hazardous Shipping Location Catalog Weight Photo Cell Kit* No. Description (Lbs.)
.25
.25
Automatic on-offswitch atpredeterminedlight levels.(120 volt only)
REQUIRESFIELDINSTALLATION.
.19
Shipping Catalog Weight Photo Cell Kit* No. Description (Lbs.)
SPH25-120
Automatic on-offswitch atpredeterminedlight levels.120 volt only.
REQUIRESFIELDINSTALLATION.
* Not Suitable for hazardous locations.
Fixtures ordered with refractors are not suitable to be ordered with reflectors.
Accessories Shipping Catalog Weight Guards No. Description (Lbs.)
SXP25WG
SXP10WG
Shipping Catalog Weight Fuse Kit No. Description (Lbs.)
SBF600
Shipping Catalog Weight Glass Globe No. Description (Lbs.)
SRT25GL
SGL10T
SFGL10T
6.6
4.2
4.2
IES Type V light distribution (asymmetrical)
Low Profile Clear Globe Low Profile Frosted Globe
Accessories Shipping Catalog Weight Reflectors No. Description (Lbs.)
SR40D➀
SR40DD➀
SR40A➀
SR40HB➀
Standard Dome ReflectorFiberglassReinforcedPolyester for use with 7 3/4 in. dia. Globe
Deep Dome ReflectorClear Prismatic Acrylic for use with 7-3/4 in. dia. Globe
30° AngleReflectorFiberglassReinforcedPolyester for use with 7-3/4 in. dia. Globe
High BayAluminumReflector withbaked onwhite enamelfor use with 7-3/4 in. dia. Globe
3.0
7.0
4.5
5.0
➀ Not suitable for wall mount applications.
Refer to Certification Guide to determine suitability of individual fixture.
Conduit Shipping Catalog Hub Weight Outlet Boxes No. Size (In.) (Lbs.)
Rigid Pendant
Ceiling Mount
Wall Mount
Stanchion Mount (25°)
Stanchion Mount (90°)
Cone Mount
SMP 3/4 3.3
SMP1 1 3.3
SMC 3/4 4.1
SMC1 3/4 4.1
SMK 3/4 14.5
SMK1 1 14.5
SMW 3/4 7.8
SMW1 1 7.8
SMS 3/4 5.9
SMS1 1 5.9
SML 3/4 5.9
SML1 1 5.9
LEDLED
RIG-A-LITE
SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CSA Certified
102
INSTALLATION DATA SHEET
SAFR LED SERIES LED LUMINAIRE FOR USE IN Class I Division 2 Groups A, B, C, D; Class II
Groups E, F, G; Class III WARNING!
1. To reduce risk of fire or explosion, do not install where the marked operating temperature
exceeds the ignition temperature of the hazardous atmosphere(s). 2. These Luminaire Fittings should be installed by qualified technicians using suitable
hazardous locations wiring methods in strict accordance with the National Electrical Code, NFPA 70 and any local requirements.
3. To prevent risk of electrical shock deactivate/ disconnect power supply before opening.
Keep tightly closed when in operation.
SAFR LED SERIES FIXTURE WHEN COMPLETELY ASSEMBLED WITH (1) GLOBE AND (1) OUTLET BOX (MOUNTING COVER). GUARD AND REFLECTORS ARE OPTIONAL. SEE TABLE BELOW. OUTLET BOXES (MOUNTING COVERS) (ONE REQUIRED) SMP, SMP1, SMC, SMC1, SMW, SMW1, SMS, SMS1, SML, SML1 OPTICS (ONE REQUIRED) GLOBE - SGL10T, SFGL10T, SRT25GL OPTIONS GUARD - SXP10WG EXTERNAL RELFECTORS – SR25A, SR25D
INSTALLATION:
1. Before installing, check the carton label and luminaire ballast housing label to insure that you have the correct luminaire fittings.
2. BEFORE INSTALLING, MAKE SURE THAT THE CIRCUIT IS DEACTIVATED.
3. Using Fig. 1 as your guide, install the outlet box (mounting cover) securely. Refer to the outlet box (mounting cover) installation
instructions provided with the outlet box (mounting cover) for details.
4. Hang the luminaire housing Fig.1 on the outlet box (mounting cover) hinge.
FIGURE 1
5. Install the luminaire housing green (ground) lead on the outlet box (mounting cover) using the provided green screw to secure it in place.
6. Power leads are clearly marked. Select the correct voltage leads as determined by the supply voltage to the luminaire and install the incoming black and white leads to the respective driver leads using the wire nuts provided.
Rig-A-Lite Tel: (713)943-0340 Visit us at: 8500 Hansen Rd Fax: (713)943-8354 http://www.rigalite.com Houston, TX 77075 Email: [email protected] SAFR May 2011 Rev.0
INSTALLATION DATA SHEET
SAFR LED SERIES
7. Close the luminaire housing against the outlet box (mounting cover) securely by tightening the screw provided with the ballast housing.
8. Install the globe, reflector and guard if
needed.
OPERATION: 1. Operate the complete assembled luminaire at its rated voltage and frequency. See the luminaire housing
label for this data. MAINTENANCE DATA: CAUTION: DISCONNECT THE SUPPLY CIRCUIT BEFORE OPENING THE LUMINAIRE
1. Although no routine maintenance is required to keep this luminaire functional, it is recommended that the globe be kept clean for optimum performance.
2. When parts wear out or become defective due to adverse environment or due to normal aging process contact Rig-A-Lite for replacement information.
Rig-A-Lite Tel: (713)943-0340 Visit us at: 8500 Hansen Rd Fax: (713)943-8354 http://www.rigalite.com Houston, TX 77075 Email: [email protected] SAFR May 2011 Rev.0
SAFR Series 75 Watt LED Hazardous Location/Marine Outside Rated Fixture
US Patent Number D637,339S
Listings and Approvals •Class I, Division 2 Groups A, B, C & D
•Class II, Division 1 & 2 Groups E, F & G •Zone 2, Groups IIA, IIB & IIC
•Class III •CUL •Enclosed & Gasketed •Wet Locations
•Simultaneous Presence •AExnR II •NEMA 3R, 4X •IP66
•UL 8750 LED Safety •Tested to LM79 & LM 80 standards •UL 1598A Marine Outside Type •UL 844 Hazardous Locations
The SAFR luminaries are UL listed for hazardous & severe environments and constructed of copper
free (less than 0.4%) cast aluminum. The finish is chemical and corrosion resistant baked-on powder epoxy. It also features external stainless steel hardware. Electro-polished stainless steel wire guards are also available. They are also available with your choice of a traditional type five refractor, a patented clear, low profile globe that maximizes light output or a frosted, low profile globe designed with both performance and safety in mind.
Product Features • 60,000 or more rated lamp life • 5,000 CCT (K) • 4,004 delivered lumens (clear globe) • 3,607 delivered lumens (frosted globe) • 2,489 delivered lumens (T5 Optics)
• 40 LEDs
• 75 Input Watts • 120-277V 50/60 Hz • 52.8 Lm/W (clear globe) • 47.6 Lm/W (frosted globe) • 33.1 Lm/W (T5 Optics)
• 347/480V 60HZ
• -30° C to 55° C • CRI: > 75 • T6 temperature rated • Five Year Warranty against manufacturers
defect or light loss
Catalog Number Logic
1 BASIC SERIES SAFR Hazardous Location LEDClass I, Division 2, Groups A, B, C & DClass II, Division 1 & 2, Groups E, F & GClass III Simultaneous PresenceZone 2, Groups IIA, IIB & IICEnclosed and GasketedWet LocationsNEMA 3R, 4X; IP66 UL 1598, 1598A, 844 & 8750 CULRestricted Breathing (Annual Testing Not Required) AEx nR II
LAMP CURRENT/LAMP WATTAGE 09 = 75 Watt 11 = 98 Watt
LAMP TYPE L = LED DRIVER VOLTAGE U = 120 to 277V 50/60HZ N = 347/480V 60HZ
2
3
5
4
GLOBE & GUARD LC = Low Profile Clear Globe Only LCG = Low Profile Clear Globe & Guard LF = Low Profile Frosted Globe Only LFG = Low Profile Frosted Globe & Guard T5 = Type V (Symmetric) Closed Bottom Glass Refractor T5G = Type V (Symmetric) Closed Bottom Glass Refractor & Guard
SAFR-09-L-U-LFG-C-1 2 3 4 5 6 7
6 MOUNTING STYLE P = 3/4" Pendant Mount P1 = 1" Pendant Mount C = 3/4" Ceiling Mount C1 = 1" Ceiling Mount W = 3/4" Wall Mount W1 = 1" Wall Mount S = 1-1/4" 25° Stanchion MountS1 = 1-1/2" 25° Stanchion Mount L = 1-1/4” 90° Stanchion Mount L1 = 1-1/2” 90° Stanchion Mount K = 3/4" Cone Top K1 = 1" Cone Top
OPTIONS1
SS = Stainless Steel Inserts (304) FB = Fuse Block2,3
TB = Terminal Block
7
HRefer to Certification Guide on page to determine suitability of individual fixture.
Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts.
1 Consult factory for pricing 2 Not available with multi-tap ballast unless
incoming voltage is specified. When installed, one fuse block is provided for 120, 277V and two fuse blocks are provided for 208, 240 and 480V. Fuse not included.
3 Fuse option not available for marine listed fixtures.
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CSA Certified
SAF SeriesLED
w w w . r i g a l i t e . c o m
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
SAFR SeriesLED
191
LED
Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL
Refer to Certification Guide to determine suitability of individual fixture.
1.5
1.0
Stainless Steel Wire Guard for Type 1, 3 & 5 refractors
Stainless Steel Wire Guard for Low Profile Clear and Frosted Globes
.5Open fuse block kit- 600 volt AC maximum.
Fixtures ordered with refractors are not suitable to be ordered with reflectors.
Accessories Shipping Catalog Weight Guards/Fuse Kit No. Description (Lbs.)
SXP25WG
SXP10WG
SBF600
Shipping Catalog Weight Glass Globe No. Description (Lbs.)
SRT25GL
SGL10T
SFGL10T
6.6
4.2
4.2
IES Type V light distribution (asymmetrical)
Low Profile Clear Globe Low Profile Frosted Globe