1
Sag Cincher Tutorial Sag Cincher Tutorial Sag Cincher Tutorial Sag Cincher Tutorial Materials: FOE (fold over elastic) Polyresin snaps - 6 caps, 2 studs, and 4 sockets Sewing machine with thread. 1. Cut one piece of FOE, about 16” long 2. Fold in half, right sides together, and sew short ends together with a narrow seam and stretch stitch. 3. Turn right side out, flatten with the seam at the centre and open, and topstitch with a stretch stitch. 4. With the seam side down, set in snaps, the studs on each end, facing up, and the sockets about 2” and 3” in from studs (check on pants for placement) 5. Slide the finished Sag Cincher through the back belt loops of pants and snap! all text and photographs copyright L. Bosch May 2010 feel free to use this tutorial for personal use, but please do not sell items made from this tutorial.
