Date post: | 22-Jan-2017 |
Category: |
Marketing |
Upload: | md-shahin-manjurul-alam |
View: | 93 times |
Download: | 3 times |
www. sajetc.com
Company Profile
Saj Engineering & Trading Company
Saj Industrial & Inspection Company
www. sajetc.com
TABLE OF CONTENTS
1. Company Profile 3
2. Non Destructive Testing (NDT) 4
3. Non-Destructive Testing Products 5-8
4. Condition Monitoring Technology 9
5. Condition Monitoring Products 10-12
6. Automobile & Heavy Duty Filter 13
7. Lubricants 13
8. Industrial Inspection Service 14-15
9. Our Valuable Customers 16
10. Our Principals 17
www. sajetc.com
Profile
Saj Engineering & Trading Company is established in 1998 to provide the Non-Destructive Testing
(NDT) and Condition Monitoring (CM) solution in Bangladesh industrial Market. Since then we are
providing the NDT and CM solution in different types of industries like power generation, fertilizer,
chemical, aviation shipbuilding, gas production and distribution, cement, welding, paper, sugar,
pharmaceuticals, research and educational institutions. For the automobile and industrial market we are
supplying lubricants, filter, radiator and spark plug. For our products we represent the most renowned
manufacturers in the world.
As we have all sorts of latest NDT and CM products we have developed an industrial inspection service
provider under the name of Saj Industrial & Inspection Company. And till now we have completed 60
Projects successfully and some projects is in our hand.
www. sajetc.com
www. sajetc.com
Non-Destructive Testing (NDT):
Non-Destructive Testing (NDT) is the use of noninvasive techniques to
determine the integrity of a material, co mponent or structure or
quantitatively measure some characteristics of an object. It is the testing
of materials, for surface or internal flaws or metallurgical condition,
without interfering in any way with the integrity of the material or its
suitability for service.
i.e. Inspect or measure without doing harm.
For Non-Destructive Testing we have the all solutions:
1. Penetrant Testing Products
2. Magnetic Particle Testing Products
3. Remote Visual Inspection Products
4. Ultrasonic Testing Products
5. Eddy Current Testing Products
6. Radiography Testing Products
7. Hardness Testing Products
8. Positive Material Identifier(PMI)/Metal Composition Checker/XRF
www. sajetc.com
Penetrant Testing Products:
Pretrant Testing is done for surface defects finding.
For this testing we supply the Magnaflux made following
products:
1. Cleaner,
2. Penetrant
3. Developer.
Magnetic Particle Testing Products:
Magnetic Particle Testing is done to find the surface and semi-
surface defects/cracks in Ferrous Metal by magnetising that
component. We supply the all the products that is required for
Magnetic Particle Test.
1. Magnetic Yoke
2. Magnetic Particle Magnetic Bench 3. Black Light (UV)
4. Residual Field Indicator/ Pie Gauge 5. Black Ink (7HF) 6. White Contrast Paint(WCP)
7. Fluorescent Bath (14 AM)
www. sajetc.com
Remote Visual Inspection Products:
For industrial endoscopic inspection we supply Olympus
Remote Visual Inspection products. For remote visual
inspection we supply:
1. Borescope
2. Fiberscope
3. Videoscope/Endoscope
Eddy Current Testing Products:
The main applications of the eddy current technique are for
the detection of surface or subsurface flaws, conductivity
measurement and coating thickness measurement.
Our Eddy Current Testing Products included:
1. Eddy Current Flaw Detector
2. Multi Scan Tube Inspection System
3. Eddy Current Rotating Scanners
www. sajetc.com
Ultrasonic Products:
Ultrasound is used by ultrasonic products to measure the thickness
and to find the defect (Crack/Flaws) in a metal.
For Ultrasonic Thickness measurement and Ultrasonic Crack/Flaw
detection we have several types of equipment.
Ultrasonic Thickness Gages:
1. Ultrasonic Thickness Gage (With Coating Thickness Measurement Option )
2. Ultrasonic Corrosion Thickness Gage 3. Ultrasonic Precision Thickness Gage
4. Ultrasonic Bond Tester
5. Pet Bottle Thickness Gage
6. Thickness Gage Transducer/Probes and Accessories
Ultrasonic Flaw/Crack Detector:
1. Ultrasonic Flaw Detector 2. Advanced Ultrasonic Flaw Detector with Phased Array
Technology
3. Automated Ultrasonic Phased Array Pipeline Girth Welds
Inspection System
4. Advanced Ultrasonic Flaw Detection Scanner 5. Ultrasonic Cobra Scanner
6. Ultrasonic Flaw Detector Transducer/Probes, Cal. Block
and Accessories
www. sajetc.com
Radiography Testing Products:
Radiographic Testing (RT) or industrial radiography is a Non-
Destructive Testing (NDT) method of inspecting materials for
hidden flaws or defects.
For Radiography Testing we have the following products:
1. X-Ray Generator
2. X-Ray Generator for Crawler
3. X-Ray Control Unit
4. Gamma-Projector
5. Computed Radiography Scanner
6. Radiation Survey Meter
7. Densitometer
8. X-Ray Film
9. RT Accessories
Hardness Testing:
For Hardness Testing we are supplying different types of
Hardness Tester.
We have the following hardness testing equipments:
1. Portable Hardness Tester
2. Ultrasonic Hardness Tester
3. Laboratory Hardness Tester
Material Composition Identifier:
It is also called the Positive Material Identifier(PMI)/XRF.
Handheld XRF used in the field of Alloy & Metal
Identification, Quality Control / Quality Assurance, Safety &
Maintenance, Superior Light Element & Aluminium Analysis
www. sajetc.com
Condition Monitoring Technology:
Condition monitoring is the process of monitoring a parameter of
condition in machinery, such that a significant change is indicative of a
developing failure. It is a major component of Predictive Maintenance
(PdM). The use of conditional monitoring allows maintenance to be
scheduled, or other actions to be taken to avoid the consequences of
failure, before the failure occurs.
Condition Monitoring Parameter:
1. Vibration Analysis
2. Oil Analysis
3. Thermal Analysis 4. Laser Alignment
5. Dynamic Balancing
www. sajetc.com
Vibration Analysis Technology:
Vibration is the first indication of a machine's
health. Of all the predictive maintenance (PM)
technologies, vibration analysis is the best measure
of machine health. Vibration can alert us to so many
different conditions that may indicate potential
machine failures.
For Vibration Analysis we have the following
system:
1. Portable Vibration Meter
2. Portable Vibration Analysis System
3. 12/24 Channel Vibration Analyzer
4. Online Vibration Monitoring System
(Protection and Prediction Rack)
5. Dynamic Balancing System
6. Laser Alignment System
7. Over Speed Protection System
8. Wireless Transmitter (Vibration, Pressure,
Temp, Cavity, PH, Flow, Level etc.)
9. Field Communicator
10. Motor Current Analysis System
11. Vibration Strobe Light
12. Analysis Software (AMS-Suite)
www. sajetc.com
Oil Analysis Technology:
Oil analysis is a quick, nondestructive way to gauge the health of an
engine by looking at what's in the oil. Oil is the lifeblood of equipment
and oil analysis provides answers to machinery health. It is as like as
medical blood test, where we can know about our diseases from our
blood. It is an integral part of the maintenance plan for power plants,
manufacturing plants, trucking co mpanies, construction equipment,
aircraft, refrigeration systems, processing, chemical plants and etc.
For Oil Analysis we have the following system:
1. FT-IR Oil Analyzer
2. Particle Counter, Size and Shape Analyzer
3. Spectrophotometer for elemental analysis
4. Automatic Sample Processer
5. Fuel Dilution Meter (Fuel Sniffer)
6. Ferrography Laboratory for Wear Particle Analysis
7. RDE Atomic Emission Spectrometer
8. Oil Analysis Spectrometer for Predictive Maintenance
9. Automatic Kinematic Viscosity Measurement of Used and New
Oil
www. sajetc.com
Ultrasonic Leak Detection & Ultrasonic Predictive Maintenance:
Ultrasound inspection offers a unique position for condition monitoring
as both a “stand-alone” inspection technology and as an effective
screening tool that can speed up the inspection process and help
inspectors determine effective follow-up actions for mechanical,
electrical and leak applications. Locating sources of energy waste,
identifying failure conditions in electrical and mechanical systems all
contribute to helping improve the bottom line. In some cases it can be a
dramatic improvement.
For Ultrasonic Leak detection & Predictive Maintenance we have the
following system:
1. Ultrasound and Leak Detection
2. Ultrasound and Mechanical Inspection
3. Ultrasound and Electrical Inspection
4. Ultrasound and Steam Trap
5. Ultrasound and Valve Inspection
IR Thermography Industrial Solution:
With the increase in energy demand worldwide, LumaSense is the leading
provider of temperature and gas sensing equipment to optimize
performance of boilers, furnaces, refineries, substations and transformers.
LumaSense’s robust temperature and gas sensing solutions provide
accurate information to optimize the performance and extend the life of
critical energy assets. As the most trusted name in sensing solutions,
energy companies turn to LumaSense when reliability matters.
1. Dissolved Gas Analysis (DGA) Monitoring
2. Distribution Transformer Monitoring
3. Transmission Transformer Monitoring
4. Winding Hot Spot Monitoring
5. Substation Thermal Imaging
6. LumaSpection for Boilers Monitoring
7. Furnace Exit-Gas Temperature (FEGT)
www. sajetc.com
Technical Teaching and Research Equipments: We are supplying Technical Teaching and Research Equipments for universities, technical colleges, research center and vocational institute of Edibon International and others principal.
EDIBON during more than 30 years has designed and manufactures more than 3000 Technical Teaching
Units in most Technical Areas.
Establishment:
1. Established in 1978. Madrid. SPAIN.
2. We supply our Technical Teaching
Units all over the world.
3. All our customers are satisfied.
Activities:
1. Design, manufacturing and
commercialization of Technical
Teaching Equipments
2. Installation, Starting-up, Training
and Technology Transfer
3. Design of complete laboratories
Research & Development:
Design and manufacture:
1. All Units (Mechanics).
2. All Electronics (Interfaces).
3. All Software Packages.
4. All Manuals.
Products:
More than 3000 Technical Teaching Units
and 2800 different Software Packages in
most technical areas, as: Physics, Electronics, Communications,
Electricity, Energy, Mechatronics &
Automation, Mechanics & Materials, Fluid
Mechanics, Aerodynamics, Thermodynamics &
Thermotechnics, Process Control, Chemical
Engineering, Food and Water Technologies,
Environment…
Quality:
1. ISO 9000: For Design,
Manufacture & After Sales Service
2. OHSAS 18001 Certificate:
3. ISO 14000
4. The Worlddidac Quality Charter
Certificate.
5. European Union Certificate
6. United Nations Certificate:
Financing:
Edibon can offer the proper financing
facilities for any particular case, by using
1. Grants
2. Soft Loans
3. Commercial Loans
4. Barter etc.
www. sajetc.com
Automobile and Heavy Duty Filter
We are the supplier of world famous filter manufacturer co mpany SAKURA.
We are supplying the following filter in
Automobile and Generator industry:
1. Oil Filter
2. Air Filter
3. Fuel Filter
4. Cabin Air Filter
5. Hydraulic Filter
6. Coolant Filter 7. Air / Oil Separator Filter 8. Coolant Filter
www. sajetc.com
Lubricants
We are supplying PERTAMINA Lubricants in
Bangladesh automobile and industrial market.
PERTAMINA is a National Oil & Gas Company in
Indonesia.
1. We have the following lubricants products:
2. Passenger Car Motor Oil
3. Passenger Car Diesel Engine Oil
4. Passenger Car Gear Oil
5. Automatic Transmission Fluid (ATF)
6. Manual Transmission Fluid
7. Industrial Gear Oil
8. Motorcycle Engine Oil
9. Hydraulic Oil
www. sajetc.com
Industrial Inspection Services:
We are providing full range of Non Destructive Testing (NDT)
and Condition Monitoring (CM) services in Bangladesh under the
banner of Saj Industrial & Inspection Company. We are using
world latest and renowned manufacturer’s technology for our
services.
Our Service Cover: Our Industrial Inspection Services are
1. Non-Destructive Testing (NDT) Service
2. Condition Monitoring Service
3. Transformer Oil Leakage Repair Service
4. Steel Building Structure Inspection Service
Non-Destructive Testing (NDT) Services:
1. Industrial Endoscopic/Video Borescopic Inspection
2. Advanced Ultrasonic Phased Array Flaw Detection
3. Conventional Ultrasonic Flaw Detection
4. Ultrasonic Thickness Gauging 5. Penetrant Testing
6. Magnetic Particle Testing 7. Hardness Testing 8. Coating Measurement 9. Eddy Current Testing
Our NDT Equipments
1. IPLEX UL Advanced Video-Borescope 2. IPLEX SA IIR Video Endoscope
3. OmniScan SX Ultrasonic Phased Array Flaw Detector 4. Epoch 1000i Ultrasonic Phased Array Flaw Detector
5. Epoch 600 Ultrasonic Flaw Detector 6. Epoch LTC Ultrasonic Flaw Detector 7. 38DL Plus Advanced Ultrasonic Thickness Gage
8. 45 MG Ultrasonic Thickness Gage 9. Y-7 Electromagnetic Yoke & UV Light
10. IPX-330 Hardness Tester
www. sajetc.com
Condition Monitoring Services: The object of 'Condition Monitoring (CM)' is to reduce the unplanned shutdown and speed loss, Extend machine life and to
find the root cause of failure in your machine, reducing overall
bearing and spare parts consumption.
Condition Based Monitoring Cover following areas:
1. Vibration Analysis
2. Dynamic Mass Balancing
3. Oil Analysis
4. Thermography
5. Laser Shaft Alignment (Upcoming) 6. Ultrasound Analysis (Upcoming)
Vibration Analysis:
1. Routine Vibration Measurement 2. Vibration Base Line Development
3. Dynamic Mass Balancing
Oil Analysis: Our onsite oil analysis facilities cover
1. Viscosity (cSt)
2. (TAN) Total Acid Number (mg KOH/g)
3. (TBN) Total Base Number (mg KOH/g)
4. Water content (ppm)
5. Oxidation (abs/mm2)
6. Alien fluid (%)
7. Anti-Oxidant Additive (%)
8. Anti-wear Additive (%)
9. Nitration (abs/mm2) 10. Sulfation (abs/mm2)
11. Soot (%)
12. Glycol/Antifreeze (%)
www. sajetc.com
We have Experienced ASNT Level-II Certified IR Thermographer.
www. sajetc.com
Training and Consultancy Services:
For our customer we are providing training and consultancy services on Non-Destructive Testing (NDT) and Condition
Monitoring Technology. Every year for the industrial engineering manpower development and knowledge sharing we are arranging seminars, exhibition, presentation and demonstration.
We also arrange day long training programs on Non-Destructive Testing (NDT) and Condition Monitoring
Technology for the national and multi-national prospective organization, training institute and engineering
universities with free of cost.
Day Long Programs:
1. Presentation and Demonstration on Non-Destructive Testing (NDT) Technology. 2. Presentation and Demonstration on Condition Monitoring Technology.
Training Programs on Non-Destructive Testing (NDT):
1. Fundamentals of NDT 2. Training on Video-Borescope
3. Training on Ultrasonic Thickness Gages
4. Training on Ultrasonic Flaw Detector
5. Training on Magnetic Particle Testing
Equipment
Training Programs on Condition Monitoring (CM):
1. Basics of Vibration Analysis 2. Vibration Analysis ISO Category Level I
3. Training on Vibration Analysis Equipments 4. Basics of Oil Analysis 5. Training on Oil Analysis Equipment
6. Basics of Thermal Analysis 7. Training of Infra-Red Thermal Camera
www. sajetc.com
Steel Building Structure Inspection:
Visual Inspection:
Visual Inspection by a AWS (American Welding Society) Certified Welding Inspector after the
welding to ensure the welding quality as per AWS D1.1 (American Welding Society) Standard.
Inspection Zone: 100% of All Weld.
Findings: Surface Crack, Blowhole, Undercut, Welding mismatch, Burn Through, Corner Melt, End
Melt, Concave/Convex of Fillet Weld, Incomplete Fusion, Incomplete Penetration, Roughness,
Undersize Filler Weld, Proper Welding Method, Under fill, Offset, Arc Strikes, Fabrication Scars,
Spatter
Dimension Check:
Dimension check by an engineer to ensure the correct measurement of steel member, anchor bolt hole,
stiffener, clids etc according to the drawing.
Inspection Zone: All Steel Structure Members.
Findings:
1. Steel Member Length
2. Steel Plate Thickness
3. Anchor Bolt Hole Diameter
4. Anchor Bolt Hole to hole centre distance
5. Clid Measurement
6. Stiffener Measurement
Dye Penetrant Test:
Dye Penetrant Testing with Magnaflux DPT Chemicals by an ASNT DPT Level-II engineer and
Imagery Interpretation Report.
Inspection Zone: 15% of All Fillet Weld.
Findings: Very small surface Crack, Small Blowhole, Undercut.
Ultrasonic Test:
Ultrasonic Flaw detection with Advanced Ultrasonic Phased Array Flaw Detector by an ASNT UT
Level-II Engineer and S-Scan Imagery Interpretation report.
Inspection Zone: 100% of All Butt Weld
Findings:
1. Internal Defect of Butt Joint
2. Butt Joint Internal Crack
3. Butt Joint Internal Porosity
WPS and PQR: As per the AWS D1.1 a steel structure fabrication company must have the Welding
Procedure Specification (WPS) and Procedure Qualification Record (PQR). We also provide
the full support for preparing these essential documents.
NDT Team in Action
CM Team in Action
Our Conducted Training
Our Seminars & Exhibitions
www. sajetc.com
OUR VALUABLE CUSTOMERS
www. sajetc.com
WE REPRESENT
SAJ ENGINEERING & TRADING COMPANY
SAJ INDUSTRIAL & INSPECTION COMPANY
House # 351 (5
th floor), Road # 07,
DOHS, Mirpur, Dhaka-1216, Bangladesh.
(Reg. address: 205/2 Elephant Road, Dhaka - 1205)
Tel: +88-02-8080693, 8080682
Fax: +88-02-8000401
Email: [email protected] m
www.sajetc.com