Phone: 00420 577 453 184, Fax: 00420 577 019 216 Headquarters: Kutnohorská 426, 109 00 Praha 10, ID: 26236893 http://www.pegascontainer.cz Living and Sanitary Containers Catalogue 2013 PEGAS CONTAINER s.r.o. manufactures and assembles: • Living containers • Sanitary containers • Special containers • Constructions from living and sanitary containers tailored according to client requirements. The biggest advantages of constructions from living and sanitary modules and containers are: • Unbeatable speed of construction at any time of the year • Lower costs of acquisition compared to classic construction • High quality and variable system • Mobility – a building can be disassembled and transferred to another place or it can be supplemented by other modules and elements as needed. Living and sanitary containers are suitable for temporary and permanent constructions: Company seats Gatehouses Shops Offices Garden houses Schools Restaurants Garages Constructions made of living and sanitary containers comply with the same building, hygienic, thermal, anti-fire and structural standards as typical buildings. Most materials are the same as materials used for typical buildings – from windows and doors through various wall and floor tiles, electric and sanitary equipment to façade systems. Where you can find us: PEGAS CONTAINER s.r.o. Želechovice 599 763 11 Zlín Česká republika Contact: Tel.: +420 577 453 184, 577 019 215 Mobile phone: +420 775 268 597 E-mail: [email protected]GSM: 49°12'43.881"N, 17°44'39.174"E
Transcript
Phone: 00420 577 453 184, Fax: 00420 577 019 216
Headquarters: Kutnohorská 426, 109 00 Praha 10, ID: 26236893 http://www.pegascontainer.cz
Living and Sanitary Containers Catalogue 2013
PEGAS CONTAINER s.r.o. manufactures and assembles:
• Living containers • Sanitary containers • Special containers • Constructions from living and sanitary containers tailored according to client requirements.
The biggest advantages of constructions from living and sanitary modules and containers are:
• Unbeatable speed of construction at any time of the year • Lower costs of acquisition compared to classic construction • High quality and variable system • Mobility – a building can be disassembled and transferred to another place or it can be supplemented by
other modules and elements as needed. Living and sanitary containers are suitable for temporary and permanent constructions :
Company seats Gatehouses Shops Offices
Garden houses Schools Restaurants Garages Constructions made of living and sanitary container s comply with the same building, hygienic, thermal, anti-fire and structural standards as typical build ings. Most materials are the same as materials used for typical buildings – from windows and doors through various wall and floor tiles, electric and sanitary equipment to façade systems. Where you can find us :
PEGAS CONTAINER s.r.o.
Želechovice 599 763 11 Zlín
Česká republika Contact: Tel.: +420 577 453 184, 577 019 215 Mobile phone: +420 775 268 597 E-mail: [email protected] GSM: 49°12'43.881"N, 17°44'39.174"E
Phone: 00420 577 453 184, Fax: 00420 577 019 216
Headquarters: Kutnohorská 426, 109 00 Praha 10, ID: 26236893 http://www.pegascontainer.cz
STANDARD TYPES OF LIVING CONTAINERS
Type PC – 1 1 pc outside power supply/terminal 380V /32A 1 pc distribution box 2 x 16A, 1 x 10A 2 pc fluorescent tube 1 x 36W with tank 2 pc socket 1 pc socket for heating 1 pc switch 1 pc plastic window 1800/1200mm, openable/pivoted, white, plastic blind 1 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm
Type PC – 2 1 pc outside power supply/terminal 380V /32A 1 pc distribution box 2 x 16A, 1 x 10A 2 pc fluorescent tube 1 x 36W with tank 2 pc socket 1 pc socket for heating 1 pc switch 1 pc plastic window 1800/1200mm, openable/pivoted, white, plastic blind 1 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm 1 pc entry room 1 pc inner door 875/2000mm
Type PC – 3 1 pc outside power supply/terminal 380V /32A 1 pc distribution box 2 x 16A, 1 x 10A 2 pc fluorescent tube 1 x 36W with tank 2 pc socket 1 pc socket for heating 1 pc switch 1 pc plastic window 1800/1200mm, openable/pivoted, white, plastic blind 1 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm 1 pc entry room 1 pc inner door 875/2000mm
Type PC – 4 1 pc outside power supply/terminal 380 V/32A 1 pc distribution box 2 x 16A, 1 x 10A 2 pc fluorescent tube 1 x 36W with tank 2 pc socket 1 pc socket for heating 1 pc switch 2 pc plastic window 900/1200mm, openable/pivoted, white, plastic blind 1 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm
Phone: 00420 577 453 184, Fax: 00420 577 019 216
Headquarters: Kutnohorská 426, 109 00 Praha 10, ID: 26236893 http://www.pegascontainer.cz
Type PC – 5 1 pc outside power supply/terminal 380 V/32A 1 pc distribution box 2 x 16A, 1 x 10A 2 pc fluorescent tube 1 x 36W with tank 2 pc socket 1 pc socket for heating 1 pc switch 2 pc plastic window 900/1200 mm, openable/pivoted, white, plastic blind 1 pc electric convector heater 2kW 1 pc galvanized outer door 875/2000mm 1 pc entry room 1 pc inner door 875/2000mm
Type PC – 6 1 pc outside power supply/terminal 380 V/32A 1 pc distribution box 2 x 16A, 1 x 10A 2 pc fluorescent tube 1 x 36W with tank 2 pc socket 1 pc socket for heating 1 pc switch 2 pc plastic window 900/1200 mm, openable/pivoted, white, plastic blind 1 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm 1 pc entry room 1 pc inner door 875/2000mm
Type PC – 7 1 pc outside power supply/terminal 380 V/32A 1 pc distribution box 2 x 16A, 1 x 10A 2 pc fluorescent tube 1 x 36W with tank 1 pc light 1 x 60 W 2 pc socket 2 pc socket for heating 1 pc socket for basin, waterproof 1 pc socket for boiler 2 pc switch 1 pc plastic window 1800/1200 mm, openable/pivoted, white, plastic blind 1 pc plastic window 600/400mm, pivoted, white 1 pc electric convector heater 2 kW 1 pc electric convector heater 0.5 kW 1 pc galvanized outer door 875/2000mm 1 pc entry room 1 pc inner door 875/2000mm 1 pc inner door 625/2000mm 1 pc porcelain toilet with flushing cistern, toilet paper holder, towel hook 1 pc porcelain hand basin (cold/warm water) 1 pc boiler 5 l 1 pc drain ventilation
Phone: 00420 577 453 184, Fax: 00420 577 019 216
Headquarters: Kutnohorská 426, 109 00 Praha 10, ID: 26236893 http://www.pegascontainer.cz
Type PC – 8 1 pc outside power supply/terminal 380 V/32A 1 pc distribution box 2 x 16A, 1 x 10A 1 pc fluorescent lamp 1 x 36W with tank 1 pc fluorescent lamp1 x 36W with tank, waterproof 1 pc socket for heating 1 pc socket for heating, waterproof 5 pc socket for basin, waterproof 1 pc socket for boiler 1 pc switch 1 pc two-lever switch, waterproof 3 pc plastic window 600/400mm, pivoted, white 1 pc electric convector heater 2 kW, for dampness 1 pc electric convector heater 1 kW 1 pc galvanized outer door 875/2000mm 1 pc inner door 875/2000mm 2 pc WC-cabin with porcelain toilet with flushing cistern, toilet paper holder, towel hook 6 pc porcelain basin (cold/warm water) 2 pc porcelain urinal with screen 2 pc shower cabin with plastic curtain 1 pc 200l boiler 2 pc floor drain
Type PC – 9 1 pc outside power supply/terminal 380 V/32A 1 pc distribution box 2 x 16A, 1 x 10A 1 pc fluorescent lamp 1 x 36W with tank 1 pc fluorescent lamp 1 x 36 W with tank, waterproof 1 pc socket for heating 1 pc socket for heating, waterproof 2 pc socket for basin, waterproof 1 pc socket for boiler 1 pc switch 1 pc two-lever switch, waterproof 2 pc plastic window, 600/400mm, pivoted, white 1 pc electric convector heater 2 kW, waterproof 1 pc electric convector heater 0.5 kW 1 pc galvanized outer door 875/2000mm 1 pc inner door 625/2000mm 1 pc WC-cabin with porcelain bowel and flushing cistern, toilet paper holder, towel hook 1 pc porcelain basin (cold/warm water) 1 pc shower cabin with plastic curtain 1 pc boiler 80 l 1 pc floor drain 1 pc ventilator 1 pc drain ventilator
Phone: 00420 577 453 184, Fax: 00420 577 019 216
Headquarters: Kutnohorská 426, 109 00 Praha 10, ID: 26236893 http://www.pegascontainer.cz
Type PC – 10 2 pc outside power supply/terminal 380 V/32A 2 pc distribution box 2 x 16A, 1 x 10A 6 pc fluorescent lamp 1 x 36W with tank 4 pc socket 2 pc socket for heating 2 pc switch 2 pc two-way switch 2 pc plastic window 1800/1200 mm, openable/pivoted, white, plastic blind 2 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm 2 pc entry door 2 pc inner door 875/2000mm 1 pc joining material
Type PC – 11 2 pc outside power supply/terminal 380 V/32A 2 pc distribution box 2 x 16A, 1 x 10A 4 pc fluorescent lamp 1 x 36W with tank 4 pc socket 2 pc socket for heating 2 pc switch 2 pc plastic window 1800/1200mm, openable/pivoted, white, plastic blind 2 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm 1 pc inner door 875/2000mm 1 pc joining material
Type PC – 12 2 pc outside power supply/terminal 380 V/32A 2 pc distribution box 2 x 16A, 1 x 10A 4 pc fluorescent lamp 1 x 36W with tank 4 pc socket 2 pc socket for heating 1 pc switch 2 pc plastic window 1800/1200mm, openable/pivoted, white, plastic blind 2 pc electric convector heater 2 kW 1 pc galvanized outer door 875/2000mm 1 pc inner door 875/2000mm 1 pc entry room 1 pc joining material
VARIABILITY OF LIVING AND SANITARY CONTAINERS It is basically possible to construct anything from living and sanitary modules. Almost all containers manufactured and assembled by PEGAS CONTAINER s.r.o. are of atypical design . The only restriction on module construction is the size of the containers, mainly due to transport. That is why we recommend for modules a maximum clear height of 3m and a maximum ground plan of one module of 12 x 3m. Given the ratio of transport price to useful area the best floor plan is 9 x 3m. TECHNICAL DESCRIPTION OF LIVING CONTAINER WITH STAN DARD DESIGN Frame: Steel structure welded under professional supervision from hollow and rolled profiles, self-supporting, provided
with a prime anticorrosive coat and polyacrylate finishing, RAL paints of your choice; 8 container corners. According to a structural engineer the type is twice stackable.
Permitted floor load : 2,500 N/m2 … it is possible to increase the load according the client’s requirements
Floor structure: Blind floor: 0.5mm galvanized profile sheets are inserted between crossbeams Insulation: mineral wool, flammability class A1, EN 13501-1 Moisture stop: 0.2mm moisture stop – polyethylene film Floor panels: 22mm particle board without formaldehydes, screwed to the steel beams, joints sealed and ground and supported by U-profiles from underneath in sanitary rooms 22mm cetris – cement-flake boards screwed to the steel beams, joints sealed and ground and supported by U-profiles from underneath Flooring: 1.5mm PVC flooring, laid in strips which are fully fused, joints are homogenously welded, grey colour Joints between the floor and walls are lined with hardened floor skirting boards, approx. 60mm high, white or grey colour
Structure of outer walls Profile sheet: 0.55mm galvanized profile sheet, painted according to your choice with RAL paints, depth of a corrugated sheet is 10mm, riveted to the galvanized U-profile of the wall structure, which is screwed to the steel frame Insulation: mineral wool put in the wall structure, flammable class A1, EN 13501-1 Moisture stop: 0.2mm moisture stop – polyethylene film Ventilation through the outer walls, dimpled sheet from outside, plastic grid with a fly net from inside. Cleaning of opening using PVC pipe with diameter of 100mm. Insulation Floor: 80mm, k = 0,632 W/m˛K Outer walls: 60mm, k = 0,667 W/m˛K Inner walls: 60mm, k = 0,546 W/m˛K Roof: 80mm, k = 0,522 W/m˛K Roof structure Profile sheet: 0.75mm galvanized profile sheet, depth of the corrugation is 40 mm, ventilated, fixed to the special roof profile, which is screwed to the frame structure. Insulation: mineral wool, flammable class A1, EN 13501-1 Moisture stop: 0.2mm moisture stop – polyethylene film
Permitted roof load : 1,250 N/m2 Roof drainage is provided via 4 plastic spouts with diameter of 60mm placed in all corner poles, which are brought from a collecting container gutter. Interior lining Ceiling: 10mm double-sided laminated chipboard without formaldehydes, washable, white, riveted to the profile beams,
beam heads are of the same colour as plastic covers, all joints are covered with special plastic strips Walls: 10mm double-sided laminated chipboard, washable, white/light oak, without formaldehydes, emission class E1,
rivet heads are provided with matching plastic covers, all joints including corners are covered with special plastic strips.
