National Power Training InstituteAn ISO 9001 : 2000 & ISO 14001 : 2004 Organization
(Ministry of Power, Govt. of India)
Sector-33, Faridabad-121003, Haryana
(website: www.npti.in)
Salient Features of AICTE approved Courses Offered
by
NPTI Institutes
B.E. (Power Engineering)Nagpur, Maharashtra
ABOUT NPTI
National Power Training Institute (NPTI), an ISO 9001 & ISO 14001 organization, under Ministry of Power, Govt. of India is a National Apex body for Training and Human Resources Development in Power Sector with its Corporate Office at Faridabad. NPTI had been providing its dedicated service for more than four decades. NPTI operates on an all India basis through its nine Institutes in different zones of the country as per details below:-
Northern Region:
1. NPTI Corporate Office, Faridabad
2. NPTI (Northern Region), Badarpur, New Delhi
3. NPTI (Hydro Power Training Centre), Nangal
Southern Region:
4. NPTI (Power System Training Institute), Bengaluru
5. NPTI (Hot Line Training Centre), Bengaluru
6. NPTI (Southern Region), Neyveli
Eastern & North Eastern Region:
7. NPTI (Eastern Region), Durgapur
8. NPTI (North Eastern Region), Guwahati
Western Region:
9. NPTI (Western Region), Nagpur
NPTI conducts following industry-interfaced academic programs with the objective to create a pool of committed and competent professionals equipped with appropriate technical skills to steer the Indian Power Sector.
NPTI cherishes a vision of value orientation and
value addition to national and transnational power
and energy sectors through training and human
resources development endeavouring to energize
people who energize the nations
Emerge as global leaders in enhancing human and
organizational excellence in Power and Energy
Sectors by blending frontier Technologies with
Management to facilitate HRD interventions that are
instrumental in providing reliable, safe, economic
and clean power
OBJECTIVES Primary objectives:
•To function as a National Organization for training in the field of - (a) Operation and Maintenance of Power Stations; and (b) All other aspects of Electrical Energy Systems including Transmission, Sub-Transmission and Distribution.
•To act as an apex body for initiating and coordinating training programs in the Power Sector of the country.
•To establish and run Training Institutes for Engineers, Operators, Technicians and other personnel of the Power Sector.
Subsidiary objectives:
•To identify and assess the training needs of the Power Sector in the country.•To coordinate the training activities of the various Utilities with those of other Technical Training Institutions and supplement it with the training programs of its own Institutes.
• To establish standard norms regarding qualifications and training for personnel of various levels.
• To serve as a National Certification Authority for the purpose of Certification of Competence and/or participation to ensure availability of properly trained personnel to man the Electricity Supply Industry.
• To initiate, conduct and coordinate the research and development studies in the field of Operation, Maintenance and Management of Power Generation and Transmission Systems and to prepare and conduct specialized training programs thereof.
• To establish, maintain and manage laboratories, workshops, experimental transmission lines, sub-stations and other facilities required in pursuance of its objectives.
• To collect information and maintain documentation in the field of electricity generation and distribution.
• To collect, prepare, edit, print and publish material, papers, periodicals or reports in furtherance of the objectives of the Society.
• To organize seminars and workshops.• To enter into agreement with any enterprise or institution or person
and provide funds to them for specific training programs, demonstrations, assignments, preparation of training material or technical guidance.
OBJECTIVES
AICTE APPROVED COURSES
COURSE NPTI REGION DURATION
YEAR OF ESTABLISHMENT
NUMBER OF BATHCES GRADUATED
MBA (Power Management )
Corporate Office, Faridabad
2 Years 2002 Nine (9)
B.Tech.(Power Engineering )
Northern Region - Badarpur, New Delhi
4 Years 2001 Eight (8)
B.Tech. (Power Engineering )
Eastern Region - Durgapur
4 Years 2002 Seven (7)
B.E. (Power Engineering )
Western Region –Nagpur
4 Years 2001 Eight (8)
9
Eligibility & Intake Qualification:
12th Std. with minimum of 45% marks in aggregate (for SC/ST, only passing marks required) 60 +1 (J &K) Seats – General, OBC, SC & ST as per norms1/6th seats in Direct Second Year for Diploma holdersCandidates having a MH-CET / AIEEE non-zero score are only eligible to apply15% seats are reserved for AIEEE candidates
Selection Criteria
Merit list based on MH-CET Scores & AIEEE ScoresAdmission through Centralized Admission Process of DTE (Directorate of Technical Education, Maharashtra)
10
MH-CET Scores
S. No.
Category 2010 2011 2012
Min. CET Score
Max. CET Score
Min. CET Score
Max. CET Score
Min. CET Score
Max. CET Score
1. General 110 150 82 128 87 135
2. ST 68 90 72 90 64 69
3. SC 102 135 70 110 40 133
4. OBC 69 144 66 113 92 140
5. VJ/NT 90 132 71 93 84 113
11
Course Fees
Tuition Fee - Rs. 85,000 per anum
Security Deposit - Rs. 1,000/- (refundable)
Hostel Room rent - Rs. 20,000/- per year
Student Welfare - Rs. 5000/- per annum
(Activities, Univ. Fees etc)
Boarding charges - As per Actuals
12
Program Structure:
•Four-year Program spread over Eight (8) Semesters.•The Curriculum is designed to impart Basic Sciences, Engineering fundamentals and Power Sector specific subjects approx. in the ratio of 40:60 with theory & practical's.•In first year, students take courses in general engineering & basic sciences.•In the second year, students take up courses on fundamentals of engineering of various discipline relevant to Power Plant Engineering•In the third year, students are exposed to Engineering & technological aspects of Power Plant including Power Plant visits.•In the Fourth year, students take up advanced courses in Power Plant subjects including Power Plant Visits, Simulator Training, Industrial Visits & Project work.
13
Course Profile 4 yrs. Degree Course in B.E. (Power Engineering)
RTM Nagpur University The syllabus covers Theory & Practical of
Basic SciencesFundamentals of Engg. of various disciplinesPower Plant specific subjects Scheme TracingIndustrial & Plant Visits On-Job Training Simulator Training Seminar & Project work related to Power Industry
14
FIRST SEMESTER
Theory:
1. Applied Mathematics I 2. Engineering Chemistry 3. Basics of Civil Engineering 4. Engineering Physics 5. Basic Electrical Engineering 6. Engineering Graphics-I Practical:
1.Engineering Physics 2.Basic Electrical Engineering 3.Engineering Chemistry 4.Communication Skill5.Computational Skills
15
SECOND SEMESTER
Theory:
1.Applied Mathematics II 2.Material Chemistry 3.Advanced Electrical Engineering 4.Advanced Physics 5.Engineering Mechanics 6.Engineering Graphics 7.Ethical Sciences
Practical:
1.Advanced Physics 2.Material Chemistry 3.Engineering Mechanics4.Engineering Graphics5.Workshop
16
THIRD SEMESTER
Theory:
1. Applied Mathematics III 2. Manufacturing Process 3. Electronic Devices & Circuits4. Fluid Power I 5. Network Analysis 6. Computer Programming
Practical:
1.Manufacturing Process 2.Electronic Devices & Circuits3.Computer Programming
17
FOURTH SEMESTER
Theory:
1.Theory of Machines 2.Digital Circuits 3.Fluid Power II4.Engineering Thermodynamics 5.Basic Electrical Machines 6.Material Science & Metallurgy
Practical:
1.Digital Circuits 2.Fluid Power II3.Basic Electrical Machines
18
FIFTH SEMESTER
Theory:
1. Heat Transfer 2. Thermal Power Station Layout, Common Aux. & Safety 3. Environmental Management4. Auto Control 5. Machine Design I
Practical:
1.Heat Transfer 2.Machine Design I 3.Power Plant Visits (Scheme Tracing & Visits)
19
6TH SEMESTER
Theory: 1. Energy Conversion I 2. Thermal Power Plant Control & Instrumentation 3. Steam Generators & its Auxiliaries4. Industrial Economics & Management 5. Power Generation Techniques
Practical:1.Thermal Power Plant Control & Instrumentation 2.Steam Generators & its Auxiliaries 3.Industrial Case Studies (Power Plant on the job training )
20
7TH SEMESTER
Theory:
1. Steam Turbines &Its Auxiliaries2. Thermal Power Plant Commissioning 3. Turbo Generator & its Auxiliaries4. Machine Design II 5. Energy Conversion II
Practical:
1.Machine Design II 2.Energy Conversion II 3.Project Seminar –Power Plant Projects
21
8TH SEMESTER
Theory:
1. Switchgear & Protections 2. Power Plant Maintenance Practices3. Non-Conventional Energy Sources4. Thermal Power Plant Operation & Performance
Practical:
1.Power Plant Operation Practices- SIMULATOR TRAINING 2.Project Work- Power Plant Projects
Competency-Engineering
Fluid Power IManufacturing ProcessNetwork AnalysisElectronic Devices & CircuitsComputer Programming Theory of MachinesEngineering ThermodynamicsDigital CircuitsBasic Electrical MachinesFluid Power IIMaterial Science & MetallurgyEnvironmental StudiesHeat TransferAuto ControlMachine Design I Energy Conversion IMachine Design IIEnergy Conversion IISwitchgear & Protection
Competency- Engineering & Power Plant Engineering
23
Competency- Power Plant Engineering
Thermal Power Station Layout, Common Aux. & SafetyEnvironmental ManagementPower Plant Visits (Scheme Tracing & Visits)Steam Turbines &Its AuxiliariesThermal Power Plant CommissioningTurbo Generator & its AuxiliariesProject Seminar –Power Plant ProjectsThermal Power Plant Operation &PerformancePower Plant Maintenance PracticesPower Plant Operation Practices - SIMULATOR TRAININGElective I-Non-Conventional Energy SourcesThermal Power Plant Control & InstrumentationPower Generation TechniquesSteam Generators & its AuxiliariesIndustrial Case Studies(POWER PLANT on the job training )
24
Core Competencies
1.Basic Sciences
The courses on basic sciences at initial level of the course helps the students to establish a firm base on science fundamentals which is essential to understand fundamentals of engineering & Power Plant Engineering.
The subjects like Engineering Physics, Engineering Chemistry, Engineering Mathematics etc., are included to establish a firm fundamental base.
25
2. Basic Engineering
The basic engineering subjects are the part of course to create a firm understanding of engineering fundamentals considering that the power engineering being multidisciplinary course the engineering fundamentals base is a must.
The subjects like Engineering Graphics (Drawing), Engineering Mechanics, Electrical Engineering with Theoretical & Practical lessons helps to establish basic engineering knowledge.
3. Core Engineering
The B.E. (Power Engineering) is a multi disciplinary program which requires core competency in various disciplines of engineering like electrical, mechanical, control & Instrumentation, electronics & computer etc. The core engineering subjects in second/third year of the program are aimed at establishing a good knowledge & understanding of core engineering subjects through theory & practicals
The subjects like Auto control, Thermodynamics, Heat Transfer, Energy conversion, Machine design, Fluid Power, Basic electrical Machines, Switchgear & protection, Electronics, computers etc. Theory & practicals establish competency in core engineering subjects to fully understand power plant engineering.
Power Plant Engineering
The ultimate aim of the B.E. (Power Engineering) program is to develop power engineers with strong fundamentals & Practical knowledge of various areas of a power plant.The power plant engineering subjects are the major part of course curriculum to develop core competency in the areas of Boiler, Turbine, generator electrical system, control Instrumentation, operation, performance efficiency, erection commissioning, maintenance etc., through theory, practicals, visits, on-job training, simulator training, case studies & project work etc.The subjects like Power plant layout, Power Generation technology, Steam Generator & Auxiliaries, Turbine & Auxiliaries., Turbo Generator & Auxiliaries, Power Plant Erection & Commissioning, Power Plant Operation & Performance, Power Plant Maintenance Practices with frequent visits to power industry.The practical training through visits to various power plants, Scheme Tracing, On-Job training, case studies & project work etc. helps in firming up the knowledge about power industry.Hands on training on state-of-the-art full scope Thermal Power Plant Simulator Training develops core competency in power plant operations & emergencies
Pedagogy
Class Room Lectures, Seminars, Case Studies, Group Discussions, Presentations, Assignments, Group Works, Summer Projects, Power Plant Visits, Simulator Training, Industrial visits, Laboratory Training etc.
Assessment (Theory)
Internal Assessment : 20 Marks (2 Class Tests), Attendance (75% Compulsory)
External Exam :80 Marks (Total 10 Questions: 3 from each section compulsory)
Assessment (Practical)
Internal Exam : 25 Marks University Exam : Viva for 25 Marks
Infrastructure
29
The institute has its own campus spread over 17 acres
10 Number AC Class Rooms Complete with VCD Projection Systems
Fully equipped Laboratories & Workshops for practical exposure
210 MW Full Scope Simulator for Power Plant Operation Training
Dynamic & Static models of various plant equipments
Infrastructure -contd
AC Library with printed & on-line journals, More than 9000 Text & reference book titles, Power Plant manuals & Journals, Audio-Visual training modules, CBT with Book-Bank facility for all students
235 Seater AC Auditorium
25 Seater Conference Hall
240 Seater Separate Hostel with Dining Facilities
Sports facilities such as Badminton, Basket Ball, Volley Ball and Table Tennis etc
Other Activities
31
Industrial Visits
Visits to Thermal Power Plants Visits to Hydro Power Plants Visits to Load Dispatch Centers Visits to Sub Stations
Cultural Activities
Fresher's Day Celebrations Teachers Day Celebrations Valedictory/Farewell Functions Annual Social Gathering
32
Library Books Details:
Library Facilities:
Programme Titles Volumes International Journals
National Journals
e-Journals
Management 4077 9033 8 6 6
Working Hrs. e-Journals Subscriptions
Area in sq.m. Reading Room Capacity
9.30 am to 6.00 pm including Saturdays
J-Gate 147 50
33
Computer Lab:
Number of PC’s 60
Legal System Software (2) 1. Window XP Operating System2. Window 7 Operating System
Legal Application Software (10)
1. MS Office2. Adobe Photo Shop3. Auto CAD4. Mat Lab
Internet Bandwidth 1. 6 mbps
34
Details of BE Campus Placement 2004-2011
S. No.
Name of Company S. No.
Name of Company
1 Adani Power 12 IL & FS
2 Essar Power 13 Jindal Power
3 L & T 14 KSK
4 Vedanta 15 GMR
5 Tata Power 16 GE
6 Reliance Power 17 Lanco
7 Torrent Power 18 Shapoorji & Pallonji
8 Thermax 19 Triveni Engineering
9 Black & Veatch 20 Bhushan Steel
10 BALCO 21 Abhijit Power
11 CESC 22 ACC
35
Student Placement Package Details
Year MaximumRs. In lakhs
MinimumRs.In lakhs
AverageRs. In lakhs
2007-11
4.35 2.76 3.39
2008-12 4.61 2.5 3.51
Campus Placement Record
Year of Passing
Total No. of Students No. of Students Placed
% age of Students Placed
2009-10
69 37 53.62
2010-11 72 30 41.67
2011-12
73 39 53.42
37
Name (In House Faculty) Designation Qualifications Experience
Mr. M. R. Chaubey Principal Director
B.Sc. (Engg.) B.E,
33 yrs.
Mr. A. G. Vinchurkar Director M. Tech., PGDHIM
33 yrs.
Mr. V. K. Sinha Director M. Tech. 31 yrs.
Mr. D. M. Lokhande Director B.E., MBA. 31 yrs.
Mr. M. V. Pande Deputy Director
M.Tech., PGDM
32 yrs.
Mr. P. K. Yadav Deputy Director
M.Tech., 27 yrs.
Mr. N. C. Moharil Deputy Director
B.E., MBA 28 yrs.
Mr. P. P. Kose Deputy Director
M .E. 21 yrs.
Faculty Details (In-House):
Name (In House Faculty) Designation Qualifications Exp.
Mr. V. Vidya Sagar Deputy Director M.Tech. 25 yrs.
Mr. S.R. Titoniya Deputy Director B.E. 21 yrs.
Mr. S.P. Dharmadhikari Deputy Director M.Tech. 14 yrs.
Mr. S.I. Mahant Deputy Director M.Tech. 12 yrs.
Mr. M.K. Dabhadakar Asst. Director B.E. 26 yrs.
Mr. Sanjay Singh Asst. Director M.Tech. 15 yrs.
Mr. P. P. Mawle Asst. Director M.E. 10 yrs.
Mr. Preetam Singh Asst. Director B.E. 04 yrs.
Mr. A. Anbarasu Asst. Director B.E. 09 yrs.
Mr. Makarand Shesh Contract Faculty B.E., MBA 10 yrs.
Mrs.A.A. Pathak Contract Faculty MSc ., Bed 9 yrs.
Ms Ballavi Mishra Contract Faculty B.E. 1 yrs.
39
Name (Guest Faculty) Qualification Subject
Dr. S.O. Katkar M.Sc., Ph.D Maths
Mr. P.D. Marathe B.Sc. Chemistry
Mr. Amar Damle M. A . Communication
Prof. D. K. Dikshit M.Tech. Heat Transfer,Therm.
Mr .S.S. Satputaley M.Tech. Engineering Drawing
Mr.J .Y. Mohite MBA Ind. Eco.& Mgmt
Mr .S. Undirwade M.Tech. Fluid Power
Faculty Details (Guest):
